Hi Guys,
I've seen Orzly thrown around in a few threads, mainly for their glass screen protector but also quite heavily in the OnePlus One Forum so thought I'd share a bit about the cases they have on offer. Also looks like they've got the handset and cases judging by their YouTube Channel...
There's this link on their site which pretty much sums up all the cases that they sell...http://orzly.com/nexus-6-key-info
Also here's a link to their YouTube Channel, https://www.youtube.com/channel/UC32F5reVmWnjp4UrCZY88Ng/feed
Looks like they have the real handset too as they've done an unboxing.
Going to be tough to decide with all these branded cases around. They all are similar in terms of design but have different price points.
Sorry I didn't know how to upload videos so it is embedded. Anyone who knows how to do that it would be great to have them posted to this thread.
Thanks,
Just ordered a black orzly fusion. Should be here Monday.
G3
Well I ordered this case as well since it was in stock. Turns out this thing is coming from the UK and won't be here until December 8th. :crying:
Got the orzly fusion today and can't say I like the buttons. They're flat and hard to feel.
Can anyone confirm what the cutouts on the backs of these cases are like? The pictures all show a big cutout that goes around the camera and the Moto logo, but the videos show only a cutout for the camera.
to0 said:
Can anyone confirm what the cutouts on the backs of these cases are like? The pictures all show a big cutout that goes around the camera and the Moto logo, but the videos show only a cutout for the camera.
Click to expand...
Click to collapse
Only the camera is cutout. No other lines, circles or dimples on the back.
Got the FlexiCase today, not impressed with the buttons either. They are completely flush with the side of the case which makes no sense, not sure if they will bulge with the phone in the case. Also confirming that there is just the one hole for the camera.
^ Did you leave a review on amazon? Maybe if they get enough bad reviews, they will fix it.
G3
I did not, not a big deal since I end up with so many cases. I'll leave a review though.
20degrees said:
^ Did you leave a review on amazon? Maybe if they get enough bad reviews, they will fix it.
G3
Click to expand...
Click to collapse
LOL bit harsh isn't it
I've just sent them an email directly about the buttons, lets see what they come back with.
I am definitely not bothered about the back cut-out for the logo as to me that is pointless - why would anyone want a portion of their phone scratched especially when I'm guessing most cases which are semi-transparent or fully transparent, show the logo anyway.
Hyatt-dreamer said:
LOL bit harsh isn't it
I've just sent them an email directly about the buttons, lets see what they come back with.
I am definitely not bothered about the back cut-out for the logo as to me that is pointless - why would anyone want a portion of their phone scratched especially when I'm guessing most cases which are semi-transparent or fully transparent, show the logo anyway.
Click to expand...
Click to collapse
Nah, not harsh at all. They show one, sell another and the buttons are horrible.
I've bought the Orzly Fusion Bumper case. And I complained to Amazon last night that the buttons are flat and it's hard to know what you are pressing until you've actually pressed it. Orzly replied with my email and told me that they've already initiated the refund for my payment.
joackie27 said:
I've bought the Orzly Fusion Bumper case. And I complained to Amazon last night that the buttons are flat and it's hard to know what you are pressing until you've actually pressed it. Orzly replied with my email and told me that they've already initiated the refund for my payment.
Click to expand...
Click to collapse
Im using there carbon fibre case, not sure what all this talk of buttons is but if its helpful to you my carbon fibre case has a cut out for the buttons so im using the real buttons of the nexus 6. Quite happy with the case
Im still waiting for my glass screen protector from orzly to arrive
How long did it take to get your carbon case^^
joackie27 said:
I've bought the Orzly Fusion Bumper case. And I complained to Amazon last night that the buttons are flat and it's hard to know what you are pressing until you've actually pressed it. Orzly replied with my email and told me that they've already initiated the refund for my payment.
Click to expand...
Click to collapse
Exact same situation. The case fit great and looked very nice. But the button issue rendered the function of the phone almost useless. They were very kind and issued my refund immediately. Solid customer service! Hopefully they make a revision because I will definitely buy it again.
They refunded my purchase too on the fusion.
N6
I got the some clear invsi case from Orzly. Alas, I don't actually have a nexus 6 yet but the case seems solid.
problem with them is the shipping is more expensive than the actual case!
forgeek said:
Im using there carbon fibre case, not sure what all this talk of buttons is but if its helpful to you my carbon fibre case has a cut out for the buttons so im using the real buttons of the nexus 6. Quite happy with the case
Im still waiting for my glass screen protector from orzly to arrive
Click to expand...
Click to collapse
ef9er said:
How long did it take to get your carbon case^^
Click to expand...
Click to collapse
I just ordered the carbon fiber tonight. It looks like it's a pretty nice case! I'm hoping it won't take weeks like I've been hearing about Orzly shipping to the US. Either way, I'm still waiting on my phone to ship so it probably doesn't matter anyway haha.
I ordered the FlexiSlim black case on Nov 18th and it arrived today. What a gorgeous case.
Sorry for the crappy pics, I had to use my tablet.
View attachment 3043328
View attachment 3043329
View attachment 3043330
Related
Send some links and thanks button will apply...
http://www.amazon.com/TPU-Cases-Fle...WDO0/ref=sr_1_1?ie=UTF8&qid=1308883763&sr=8-1
Ordered the one linked above. It arrives tomorrow. Will let you know.
Congo123 said:
http://www.amazon.com/TPU-Cases-Fle...WDO0/ref=sr_1_1?ie=UTF8&qid=1308883763&sr=8-1
Ordered the one linked above. It arrives tomorrow. Will let you know.
Click to expand...
Click to collapse
Thanks for the order! I'm personally using our Smoke TPU cases (no pattern) and love it. I'm actually taking the Otterbox Commuter back. I love that you can see the HTC logo through it.
Here is our link since you asked: http://tpu-cases.com
I ordered one that comes in tomorrow. Does this type of case ever really stretch or lose its shape?
retnuh730 said:
I ordered one that comes in tomorrow. Does this type of case ever really stretch or lose its shape?
Click to expand...
Click to collapse
Nope TPU cases do not lose their shape
I'm not quite sure what the benefits of TPU are. I've done Googling, and I've read that they're more durable and hold their original form better. Is that the extent of it? Apologies for my ignorance, but I'm curious.
Also, how are they aesthetically?
I am also using a smoke grey one from tpu-cases.com. Looks great and works great but there are a few quirks.
First off its tight....so tight that you cannot get the case off the phone without ripping the battery cover off along with it also.
2nd The top camera hole (the one closer to the top of the phone doesn't line up perfect like the other camera hole. It doesn't block the camera by any means but it just doesn't line up right.
Great Case though...Far better then I thought it would be for me having the case about a month before the phone came out
Just ordered this one...it has a checker pattern but is nice
http://cgi.ebay.com/ws/eBayISAPI.dl...150489&ssPageName=STRK:MEWAX:IT#ht_3148wt_956
If u want a smoke one no pattern here is a link
http://cgi.ebay.com/ws/eBayISAPI.dl...176002&ssPageName=STRK:MEWAX:IT#ht_3148wt_956
Just ordered the smoke case off of Amazon. Should be here tomorrow (thank you Amazon Prime w/ $4 overnight shipping), so I'll no longer be super afraid to drop it.
http://tpu-cases.com/index.php?main_page=product_info&cPath=7&products_id=101
"First off its tight....so tight that you cannot get the case off the phone without ripping the battery cover off along with it also."
That would be a positive for me.
Congo123 said:
"First off its tight....so tight that you cannot get the case off the phone without ripping the battery cover off along with it also."
That would be a positive for me.
Click to expand...
Click to collapse
Me, too. And I love the rubberized feel of it.
Looks like the Amazon clear smoke ones for me. Will be ordering tonight.
I just put in an order from Tpu cases. Figure I`ll use it until I get case with kickstand
OneStepAhead said:
Thanks for the order! I'm personally using our Smoke TPU cases (no pattern) and love it. I'm actually taking the Otterbox Commuter back. I love that you can see the HTC logo through it.
Here is our link since you asked: http://tpu-cases.com
Click to expand...
Click to collapse
Just ordered one black and other smoke. Thanks
I ordered my smoke one from http://tpu-cases.com a couple of weeks ago. The only issue I have with it is that the power button is a bit difficult to get at. Not a big deal and I would think that it wouldn't effect most people the same, I have large hands.
http://www.amazon.com/TPU-Cases-Flex...8883763&sr=8-1
Received the case linked above and couldn't be happier with it. Previously I used the HTC silicone rubber case for my EVO 4G followed by an Otterbox Commuter when it was available. Over time I was disappointed in both cases as the silicone rubber of both products stretched and I was always trying to "form" it around the phone. This TPU case slides easily out of my pocket and does not seem to grab lint. It also seems as if it is going to hold up very well. The cutout on the top camera is a little off, but does not impact the ability of the phone to take pictures, focus, etc. I too had planned on kicking the HTC branded kickstand case......but I think I would be happiest with a TPU case with a modded battery cover that had a kickstand with a TPU case over it with cutout added.
Congo123 said:
"First off its tight....so tight that you cannot get the case off the phone without ripping the battery cover off along with it also."
That would be a positive for me.
Click to expand...
Click to collapse
I have the TPU case, and that issue is a slight annoyance for me. These battery covers feel so flimsy as it is.
Congo123 said:
"First off its tight....so tight that you cannot get the case off the phone without ripping the battery cover off along with it also."
That would be a positive for me.
Click to expand...
Click to collapse
I think its a positive too, but it is hard to get the case off without pulling off the battery door too. It's just a weird battery door design I think. It's not a huge issue, but I did notice it as well. As for the top camera hole being 1mm off or so, we are fixing the mold and will have smoke, smoke argyle, and black with the correct positioning as early as next Friday. If you already ordered and you want one of the new ones when they come in just shoot me a PM and I'll get you on free of charge. As for the white, red, and green those ones are staying as is for the time being. It is just a cosmetic thing though, it doesn't block the camera at all. Sorry guys!
Any of you guys that ordered from me, if you have some free time I would be eternally grateful if you left product reviews for them on Amazon. Reviews really help sales tremendously.
OneStepAhead said:
I think its a positive too, but it is hard to get the case off without pulling off the battery door too. It's just a weird battery door design I think. It's not a huge issue, but I did notice it as well. As for the top camera hole being 1mm off or so, we are fixing the mold and will have smoke, smoke argyle, and black with the correct positioning as early as next Friday. If you already ordered and you want one of the new ones when they come in just shoot me a PM and I'll get you on free of charge. As for the white, red, and green those ones are staying as is for the time being. It is just a cosmetic thing though, it doesn't block the camera at all. Sorry guys!
Any of you guys that ordered from me, if you have some free time I would be eternally grateful if you left product reviews for them on Amazon. Reviews really help sales tremendously.
Click to expand...
Click to collapse
Quick question about your cases. Any reason your cases cover the camera button, like for support reasons? It's harder to push the camera button down than I'd like, causing shaky pictures, but I cut a hole out for it. Just a thought for future updates.
I like the camera button covered....that button would eventually get sheared off by me if it wasn't covered. Ohh and I left amazon feedback ftw.
Anyone have any experience with a case from Ventev? I've never even heard of them, but looking at their site it seems they make a lot of products.
Anyways I found this http://www.tessco.com/products/displayProductInfo.do?sku=532148&eventPage=1.
Honestly never heard of them myself. The price looks like it may be on the high end for what it seems to be, but if it's good quality then it'd be worth it. If you get one, post back and let us know how it is. I have a cheap Ebay TPU case on the way for now but I'm keeping my eye out for a good one.
I havnt heard of that case series, im waiting for the Commuter Case by Otterbox.. Still hasnt been released.. :/
http://www.amzer.com/Amzer-TPU-Polycarbonate-Case-Grey-Black-for-LG-Optimus-G-E970-P95217.htm
Looks just like this one ?
Sent from my LG-E970 using Tapatalk 2
They do
They do look exactly the same expect for one is labeled by a brand and the other isn't lol.
WA_Bob said:
Honestly never heard of them myself. The price looks like it may be on the high end for what it seems to be, but if it's good quality then it'd be worth it. If you get one, post back and let us know how it is. I have a cheap Ebay TPU case on the way for now but I'm keeping my eye out for a good one.
Click to expand...
Click to collapse
Have you received your TPU case? I ordered one yesterday but I got an email today from the vendor saying that they just found out they wouldn't fit AT&T phones and they refunded me. Now I'm not seeing any TPU ones on ebay.
esron said:
Have you received your TPU case? I ordered one yesterday but I got an email today from the vendor saying that they just found out they wouldn't fit AT&T phones and they refunded me. Now I'm not seeing any TPU ones on ebay.
Click to expand...
Click to collapse
I ordered mine off eBay 2 days ago and got the same message, he also gave me a full refund. Time to start saving pennies for an otterbox!
esron said:
Have you received your TPU case? I ordered one yesterday but I got an email today from the vendor saying that they just found out they wouldn't fit AT&T phones and they refunded me. Now I'm not seeing any TPU ones on ebay.
Click to expand...
Click to collapse
VannMannE39 said:
I ordered mine off eBay 2 days ago and got the same message, he also gave me a full refund. Time to start saving pennies for an otterbox!
Click to expand...
Click to collapse
See this.... http://forum.xda-developers.com/showpost.php?p=34586587&postcount=4
adfurgerson said:
See this.... http://forum.xda-developers.com/showpost.php?p=34586587&postcount=4
Click to expand...
Click to collapse
Thanks, I saw that. I've had 2 piece cases on my other phones in the past (incipio, body glove) and I actually prefer the cheap TPU ones best. The cheap TPU ebay/amazon ones (like this: http://tinyurl.com/ct4ktzd) are really low profile, slide in and out of the pocket easily, are flexible yet firm enough to absorb shock from reasonably high drops and only cost like $3. Hopefully someone comes out with one for the OG soon. I might buy one of those ones you linked to in the meantime.
esron said:
Thanks, I saw that. I've had 2 piece cases on my other phones in the past (incipio, body glove) and I actually prefer the cheap TPU ones best. The cheap TPU ebay/amazon ones (like this: http://tinyurl.com/ct4ktzd) are really low profile, slide in and out of the pocket easily, are flexible yet firm enough to absorb shock from reasonably high drops and only cost like $3. Hopefully someone comes out with one for the OG soon. I might buy one of those ones you linked to in the meantime.
Click to expand...
Click to collapse
I like the casemete popcase except the rubber wears away like a pencil eraser.
http://www.amazon.com/Case-Mate-Case-Stand-Samsung-Galaxy/dp/B0057G0T5S
adfurgerson said:
I like the casemete popcase except the rubber wears away like a pencil eraser.
Click to expand...
Click to collapse
Dropped my phone this morning, no damage but I decided I couldn't wait around for a case I actually liked and ordered one of those foryourcell ones. I'll post some pictures and write up a little review when I receive it.
esron said:
Dropped my phone this morning, no damage but I decided I couldn't wait around for a case I actually liked and ordered one of those foryourcell ones. I'll post some pictures and write up a little review when I receive it.
Click to expand...
Click to collapse
I will be gone all week for work, so you will probably have yours first. Will look for your post.
Ventev Case
The case arrived and fits the AT&T LG Optimus G E970.
The case consists of 2 parts, a TPU case and a Polycarbonate back cover. The Polycarbonate back cover can be taken off and you can then just use the TPU case.
All buttons remain functional with the case even though the case covers them, and all of the ports and the camera remain functional and accessible.
I have no problem slipping in or taking the phone out of my pocket with the case on.
The case does add significant thickness and heft to the phone, but the case seems solid.
I should mention that I ordered the case from Amzer.com, but it looks identical, and has Ventev printed on the back Polycarbonate cover.
protecyon said:
The case arrived and fits the AT&T LG Optimus G E970.
The case consists of 2 parts, a TPU case and a Polycarbonate back cover. The Polycarbonate back cover can be taken off and you can then just use the TPU case.
All buttons remain functional with the case even though the case covers them, and all of the ports and the camera remain functional and accessible.
I have no problem slipping in or taking the phone out of my pocket with the case on.
The case does add significant thickness and heft to the phone, but the case seems solid.
I should mention that I ordered the case from Amzer.com, but it looks identical, and has Ventev printed on the back Polycarbonate cover.
Click to expand...
Click to collapse
Thanks for the info. Can you, please, check that there are cut outs for both mics (the top and the bottom)? Thanks.
ferganer said:
Thanks for the info. Can you, please, check that there are cut outs for both mics (the top and the bottom)? Thanks.
Click to expand...
Click to collapse
There are cutouts for both the bottom and top mics.
Can you please take some pictures when you have some free time? The only picture online is the one just showing the back.
What about power button notification light?
gsrrr said:
Can you please take some pictures when you have some free time? The only picture online is the one just showing the back.
Click to expand...
Click to collapse
Attached some pictures at the following link:
http://imgur.com/a/Jn2TF/embed#4
The quality isn't great, but it should give you an idea.
Let me know if you need something clearer and I'll get out my DSLR.
DeathmonkeyGTX said:
What about power button notification light?
Click to expand...
Click to collapse
The notification light gets covered up unfortunately.
Here's some crappy pictures. Only complaint is the tpu rubber part fits really tight. It was hard to get in and lifted up the corner of the screen protected. But took it straight from mailbox and put on phone, so maybe I should have let it warm up.
Thanks for the pictures, folks. I'll probably go ahead and get the Ventev case for now until Otterbox comes out If it does, of course).
So, from what I see, the Amzer and Ventev cases are identical, except for the logo on the back?
Whats good ya'll?
I want to know what kind of case everyone here using for their LG L9 P769. where & how much you paid for it? did you like it?
Im waiting for the case and screen protector i purchased on ebay, it should be here this week. I will post pictures and short review as soon i received it.
Thanks!
raffstyle said:
Whats good ya'll?
I want to know what kind of case everyone here using for their LG L9 P769. where & how much you paid for it? did you like it?
Im waiting for the case and screen protector i purchased on ebay, it should be here this week. I will post pictures and short review as soon i received it.
Thanks!
Click to expand...
Click to collapse
I just bought a black tpu case and a screen protector for 3,18 €, shipment included.
MisterVik said:
I just bought a black tpu case and a screen protector for 3,18 €, shipment included.
Click to expand...
Click to collapse
From where?
I bought XtremeGuard protectors when they were 70% off (I got 2 of them @ $1.50/each). They are pretty good, and the same material as ArmorGuard and InvisiShield. If you are looking for low price, I would recommend them, but they do not cover underneath the center button (they have U-shaped cutouts, rather than holes). Good enough until I can get the InvisiShield on sale. I do like the feel and protection provided by the wet-apply protectors.
I also got "Black Candy Skin TPU Gel Case Cover For LG Optimus L9 P769 (T-Mobile)" from Amazon (was $1.29 + 2.94 S/H). The case is slim, and slips off easy enough, as well as slick enough to not get stuck in my pocket or pick up dirt. They do cover the buttons with indents in the thermo-poly-urethane. The volume buttons work pretty well, but the power button is a little harder to use. It works for now until they develop nicer cases for the phone.
hamdimo said:
From where?
Click to expand...
Click to collapse
From eBay. I can't post link because i'm noob here and forum doesn't allow me.
EDIT:
by the way, if you look for L9's screen protector / L9's case at eBay or AliBaba, you'll find it.
I got the Case today, I got this on ebay for $9.50 with free shipping and its called P769 3 in 1 Travelers hard case holster. there are 2 color available white and black with a rubberize finish on it, i got the white one for now.
I really like this case, at first i was thinking of not using the Holster because I just want a 1 piece hard back cover for the P769. but this case and holster works really well together so im going to use both. the holster can be also a landscape/portrait stand for the phone. the case slide to the holster smoothly both in and out and feel secured when they are attached together.
Pro:
Fits very well
Ports are well cut
Feels great to hold
Good build Quality
Good price
3in1
Cons
rubber Finish might chip soon
No other color
Holster clip is not that strong
Nice!
Do you have a picture of the clip?
Does the phone slide out or snap out?
p.s. This thread needs to be moved under accessories sub-forum.
Looks cool, what is that launcher you are using? or is it rooted
I got the EZguard Screen protector for $4 (4pcs) on ebay and its 100% GARBAGE!!!
The screen protector is already scratch up out of the envelope, installing instruction is somewhat not clear... I read somewhere that it supposed to be wet install but still its pure garbage i tried it. i still got 2 out of 4 screen protector.. well its $4 cant complain anymore.
Im going to get the Skinomi or IQ LIQuidskin on amazon later. they got good reviews so i think that should work.
kevev said:
Nice!
Do you have a picture of the clip?
Does the phone slide out or snap out?
p.s. This thread needs to be moved under accessories sub-forum.
Click to expand...
Click to collapse
Here the clip picture and how it turns into a stand.
The phone slides out.
sjraman79 said:
Looks cool, what is that launcher you are using? or is it rooted
Click to expand...
Click to collapse
Im not rooted. im using Launcher 8 skin from play store, i also add battery solo widget.:good:
Thanks for posting the pictures.
Does the clip come off of the holster side?
Sent from my Transformer TF101 using xda app-developers app
I got a Black Leather case ( Made in Korea ) free with my Optimus L9 P765 ( Rs 18,000 from Kolkata )
No screen protector available in local stores yet, will check next month.
StubbornRunner said:
Thanks for posting the pictures.
Does the clip come off of the holster side?
Sent from my Transformer TF101 using xda app-developers app
Click to expand...
Click to collapse
NO... maybe if you want the clip off it will be for good. yet there will be a teeth gear like circle on the holster. (that gear is for stopping the holster to change your preferred orientation)
Does this case work well? Anyone here tried it?
Optimus-T-Mobile-Hybrid-Black-Shape/dp/B00ASSP0V8/ref=pd_sim_cps_4
Paste that after amazon.com/, because XDA won't let me post links.
Also,the only screen protectors I see on Amazon are the EZtrash screen protectors. I have heard these are awful. Are there others that work better, or is it just a matter of waiting?
DatNexus said:
Does this case work well? Anyone here tried it?
Optimus-T-Mobile-Hybrid-Black-Shape/dp/B00ASSP0V8/ref=pd_sim_cps_4
Paste that after amazon.com/, because XDA won't let me post links.
Click to expand...
Click to collapse
I have this case. It does work well. The "kick stand" will prop the phone up in both landscape and portrait orientations.
The case does add a little bulk. It has a silicon/rubber soft layer that goes around the phone and a hard shell that wraps around that. Should provide good protection.
---------- Post added at 08:14 PM ---------- Previous post was at 08:06 PM ----------
raffstyle said:
NO... maybe if you want the clip off it will be for good. yet there will be a teeth gear like circle on the holster. (that gear is for stopping the holster to change your preferred orientation)
Click to expand...
Click to collapse
Since this case was close to what I wanted: A "clam shell" case for the phone to put in my pocket, I went ahead and bought it in black.
The clip came off very easily. Too, easily. I'd be afraid to let my phone dangle from my belt with that clip.
Anyway, as you pointed out, there was a "gear like circle" protruding from the case after the clip was taken off. I carefully removed it and made it flush with rest of the plastic with a dremel tool. I doesn't look too bad.
Bought this universal case with elastic edges for $14.99 from Target. Magnetic front clasp. Phone fits snugly, very comfortable to hold or wear in pocket-feels secure (feels cumbersome on belt). Added screen saver for L9 from T-Mobile for additional $16 (believe). Screen protector was well worth it to cut fingerprint grease.
bought 2 of these phones for my parents and was looking around for good quality cases. Just thought I'd share my findings :
1) For my mom : Tech21 White snap case for LG optimus L9 P769 (refer to T-Mobile Website, shows middle camera hole) :
http://www.ebay.com/itm/151027412771?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
2) For my dad : Body Glove case with stand (reviews in amazon are excellent)
http://www.ebay.com/itm/150992696200?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
The two companies also have several other cases available for P769 (middle camera hole version), just lookup Tech21 or Body Glove Optimus L9 case..hope that helps for members looking to find quality case for this *mid-range-and-obscure* phone. Phone's arriving tomorrow! Cant wait.
Cheers!
I'm sorry I didn't see this thread before (It didn't even show in search) so I made another... Mods, feel free to close my thread.
Anyway... Here's mine
IllumiShield 3 pack screen protectors - $7.65
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=380614141569
My review: EXTREMELY well cut. Edge to edge protection done proper. Very easy to install. And they are actually antibubble.
Highly recommended. Ordered on a Monday, got them today (Thursday) - Ships from California
Future Armor Ballistic Case - $12.95
http://www.ebay.com/itm/281090273071?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
My review: VERY nice. Feels nice in the hands. Only adds about 1/8th inch all the way around. The seller is also very easy to work with. I had an issue with the case (rubber coating wasn't correct in one spot) and she immediately shipped a replacement.
Again, Highly recommended. Ordered on a Friday, got it on the following Monday - Ships from New York
raffstyle said:
I got the EZguard Screen protector for $4 (4pcs) on ebay and its 100% GARBAGE!!!
The screen protector is already scratch up out of the envelope, installing instruction is somewhat not clear... I read somewhere that it supposed to be wet install but still its pure garbage i tried it. i still got 2 out of 4 screen protector.. well its $4 cant complain anymore.
Im going to get the Skinomi or IQ LIQuidskin on amazon later. they got good reviews so i think that should work.
Click to expand...
Click to collapse
I too ordered these first... And also had the exact same issues you do/did. Needless to say, I sent them this email (coped word for word) and was refunded. Then I order what's in my previous post above this one, and they are wonderful! Here's the email"
After receiving 6 of these screen protectors, I must say, they suck. I was expecting to keep a few as backups later on, but no... This item is so ****ily made that I used 5 of them to even get it close. I threw the 6th in the trash, because that's about the only thing it is good for. I have never had issues installing a screen protector. Its normally pretty straight forward and easy. Not this product. The moment the backing is pulled off, the static cling attracts every dust particle in the known universe before you can even line the damn thing up. Even after lining it up...FIVE TIMES, the things still weren't cut correctly. But, I guess you get what you pay for, so my bad.
Click to expand...
Click to collapse
tribalartgod said:
I'm sorry I didn't see this thread before (It didn't even show in search) so I made another... Mods, feel free to close my thread.
Anyway... Here's mine
IllumiShield 3 pack screen protectors - $7.65
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=380614141569
My review: EXTREMELY well cut. Edge to edge protection done proper. Very easy to install. And they are actually antibubble.
Highly recommended. Ordered on a Monday, got them today (Thursday) - Ships from California
Future Armor Ballistic Case - $12.95
http://www.ebay.com/itm/281090273071?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
My review: VERY nice. Feels nice in the hands. Only adds about 1/8th inch all the way around. The seller is also very easy to work with. I had an issue with the case (rubber coating wasn't correct in one spot) and she immediately shipped a replacement.
Again, Highly recommended. Ordered on a Friday, got it on the following Monday - Ships from New York
Click to expand...
Click to collapse
Image 2......Wireless charging???
No doubt Xperia Z3 is a beautiful design and most of the owners are inclined to show its curves, shape and color (specially the copper version) to others. I have been looking for many transparent cases around from different brands. In order to check their reviews, I looked at the reviews for xperia z2 cases by all of them.
My findings: Cheaper options available like yousave are not as transparent as they claim. The gel and silicon based cases are not at all transparent. Most of the transparent cases are susceptible to scratches. I have read good reviews about the tough naked case by CaseMate but the case does not protect the front. Then there is Spigen's case (which is not yet available yet) which has good reviews but the side bumper is made of TPU which is not totally transparent and looks a cheap look. The best reviews I found was for Ringke Fusion case however one really bad thing i have read about it is that if the phone falls, the sides of the case scratch the color off the phone. The case claims to have shock absorption but I fail to understand how they claim it.
If anyone among you have used any case before, please guide and recommend and review.
I was looking for a transparent slim case like this, but I can't find any for the Z3 only the Z3c.
http://www.ebay.com.au/itm/ULTRA-Sl...bilePhoneAccessories&var=&hash=item4187d2b0d6
I bought this one, still wanting for it to arrive here.
http://www.ebay.com/itm/Afan-Ultrat...t=US_Cell_Phone_PDA_Cases&hash=item27eb71f4e7
Anybody tried ringke?
http://www.amazon.com/gp/aw/d/B00NO...200_QL40&qid=1413866560&sr=8-1#ref=mp_s_a_1_1
jhun80 said:
Anybody tried ringke?
http://www.amazon.com/gp/aw/d/B00NO...200_QL40&qid=1413866560&sr=8-1#ref=mp_s_a_1_1
Click to expand...
Click to collapse
Mine was ordered on Oct. 2nd, the next day I received a Tracking Information, still today it just says Label created, when I finally could reach them they told me that they had production issues and was delayed, but the new shipping date was Oct. 24th then later another one called me (left a message earlier) and said that it was 27th, when I asked if it was the 24th or the 27th, he insisted that it was next monday, that of I wanted to keep the order they will offer me a 15% discount if not they could cancel it.
Due that I think that Ringke Fusion design is the best there is for our phones I kept it, I've been using the Fusion in my past 3 phones and are of great quality, honestly I don't know what happened to them this time as is the first time I have problems with them with an order or product.
i ordered this one, really like it...
http://shop.brando.com/Simplism-Ultra-Thin-Cover-Set-for-Sony-Xperia-Z3_p11839c1785d004.html
I ordered the Case-Mate Barely There case. It looks and feels OK, although protection is minimal as you'd expect. The cut out on the left is rather large as you can see, to allow the official dock to be used.
The case scratches rather easily. I marked the back by sliding my phone a few centimeters across the desk within an hour of using the case.
Overall, I wouldn't recommend it, due to how easily it scratches.
I'd be really interested to see if anyone handsome photos ofnthe Ringke Fusion case.
Sent from my SGP511 using XDA Free mobile app
jomansch said:
i ordered this one, really like it...
http://shop.brando.com/Simplism-Ultra-Thin-Cover-Set-for-Sony-Xperia-Z3_p11839c1785d004.html
Click to expand...
Click to collapse
i ordered this one for my xperia z2 and i can tell you its only for scratches no protection at all, easy scratches the case, i droped my phone and my tempered glass screen protector broke( thank Good i had a screen protector)
Yes I have also read that case mate barely there scratches easily. I have high hopes from ringke fusion. fingers crossed
heara said:
i ordered this one for my xperia z2 and i can tell you its only for scratches no protection at all, easy scratches the case, i droped my phone and my tempered glass screen protector broke( thank Good i had a screen protector)
Click to expand...
Click to collapse
Is the one from Brando that clear kinda sticky plastic "gel" material?
jhun80 said:
Anybody tried ringke?
cache=83468607623d9aec8d410b1e55df0e93&pi=SY200_QL40&qid=1413866560&sr=8-1#ref=mp_s_a_1_1[/url]
Click to expand...
Click to collapse
This case looked to be the best. It got really great reviews for the iphone 6+, hopefully this one is built as good. I ordered it from eBay, I hope it has a descent opening to use a magnetic charger. It should be in Thursday, to bad I don't have my phone yet to try it on.
joe198219 said:
This case looked to be the best. It got really great reviews for the iphone 6+, hopefully this one is built as good. I ordered it from eBay, I hope it has a descent opening to use a magnetic charger. It should be in Thursday, to bad I don't have my phone yet to try it on.
Click to expand...
Click to collapse
Same. I'm hoping it'll fit the magnetic charger and my front and back tempered glass protectors...
jomansch said:
i ordered this one, really like it...
http://shop.brando.com/Simplism-Ultra-Thin-Cover-Set-for-Sony-Xperia-Z3_p11839c1785d004.html
Click to expand...
Click to collapse
se1000 said:
Is the one from Brando that clear kinda sticky plastic "gel" material?
Click to expand...
Click to collapse
well its more like a protector film very thin
jhun80 said:
Anybody tried ringke?
http://www.amazon.com/gp/aw/d/B00NO...200_QL40&qid=1413866560&sr=8-1#ref=mp_s_a_1_1
Click to expand...
Click to collapse
erasat said:
Mine was ordered on Oct. 2nd, the next day I received a Tracking Information, still today it just says Label created, when I finally could reach them they told me that they had production issues and was delayed, but the new shipping date was Oct. 24th then later another one called me (left a message earlier) and said that it was 27th, when I asked if it was the 24th or the 27th, he insisted that it was next monday, that of I wanted to keep the order they will offer me a 15% discount if not they could cancel it.
Due that I think that Ringke Fusion design is the best there is for our phones I kept it, I've been using the Fusion in my past 3 phones and are of great quality, honestly I don't know what happened to them this time as is the first time I have problems with them with an order or product.
Click to expand...
Click to collapse
The review left by the user wasn't too positive. I ordered this today on Amazon and cancelled it. :/
I finally got mine about 10 days ago, I really love it and to me it looks great, they thought of everything, it even fits the Dual Sim D6633, the left side flap fits perfectly on it, plus they thought of all the Magnetic chargers and even adapters out there so I kind of think that this is the most universal cover for our z3.
BUT, I left them a negative feedback on eBay simply because that's no way of working on the Customer service side, no responses to emails for weeks and after offering me a 15% discount if I kept the order active, I'm still waiting for them to rely to the email I sent dating yes and asking about how was I suppose to receive the credit.
EDIT: SOLD!!
Just purchased the Ringke Fusion Case, what sold it for me mostly was the cool headphone jack protection.
My previous phones have ended up getting pretty corroded in there. And after taking shots with the xperia Z3 in my pool yesterday, the headphones attached macro application, was causing the phone to go nuts as soon as water entered the jack slot.
Another nice thing which annoyed me with a similar case, is that the cutout for the lens and flash was not very big, causing horrid shots when the flash was used. This case looks to have a good space around that flash to hopefully avoid this issue.
Will keep you posted after it arrives
danw_oz said:
Just purchased the Ringke Fusion Case, what sold it for me mostly was the cool headphone jack protection.
My previous phones have ended up getting pretty corroded in there. And after taking shots with the xperia Z3 in my pool yesterday, the headphones attached macro application, was causing the phone to go nuts as soon as water entered the jack slot.
Another nice thing which annoyed me with a similar case, is that the cutout for the lens and flash was not very big, causing horrid shots when the flash was used. This case looks to have a good space around that flash to hopefully avoid this issue.
Will keep you posted after it arrives
Click to expand...
Click to collapse
I have this case and I hated it from the moment I got it. It came with a round sticker in the back. By simply trying to remove it, the case got very badly scratched. I was furious. I keep my cases 100% clean and this piece of garbage got damaged by nothing and within 2 minutes of getting it out of the packaging. I was going to return it immediately, but the other cases I bought were even worse in other aspects.
This case covers all the buttons, the MicroSD/SIM card slot, and it has a plug for the audio port. The magnetic and USB ports are not covered. I had to cut the audio plug off because it was putting too much pressure on my earphones.
The lips in front of the case give the phone some protection; they're thick in my opinion. I feel this case will protect the phone in case of a drop. It's thicker than I'd like, but it's definitely not a "thick" case. The fit is not tight at all, so I believe it won't damage or displace screen protectors. It's not going to fall off the phone, but it's not difficult to put it on at all.
This is my daily driver because I haven't been able to find anything less bad. I was looking for an ultra thin, transparent case, but this one had great reviews all over the Internet.
Rinke fusion case
android_fury said:
I have this case and I hated it from the moment I got it. It came with a round sticker in the back. By simply trying to remove it, the case got very badly scratched. I was furious. I keep my cases 100% clean and this piece of garbage got damaged by nothing and within 2 minutes of getting it out of the packaging. I was going to return it immediately, but the other cases I bought were even worse in other aspects.
This case covers all the buttons, the MicroSD/SIM card slot, and it has a plug for the audio port. The magnetic and USB ports are not covered. I had to cut the audio plug off because it was putting too much pressure on my earphones.
The lips in front of the case give the phone some protection; they're thick in my opinion. I feel this case will protect the phone in case of a drop. It's thicker than I'd like, but it's definitely not a "thick" case. The fit is not tight at all, so I believe it won't damage or displace screen protectors. It's not going to fall off the phone, but it's not difficult to put it on at all.
This is my daily driver because I haven't been able to find anything less bad. I was looking for an ultra thin, transparent case, but this one had great reviews all over the Internet.
Click to expand...
Click to collapse
True! When i got mine, i wondered why it's not as clear as I'd expected it. So i tried wiping it with my handkerchief to see if it's just some dirt or leftover adhesive from the protective film. To my shock, what i was wiping was a scratch already, and i made it even worse by rubbing it. Good thing i have the white z3 compact act so it's not too noticeable. But really disappointed with it's quality. I waited two months for this cause i live in the Philippines. Sigh. Rinke's Fusion case isn't as nice as it advertises.
UPDATE: apologies, there was a sticker on the rear panel. That's why it wasn't as clear and it easily "scratched". my phone looks okay now. Haha
You should take a look at http://aliexpress.com - it might takes 3-4 weeks to ship, but you will find literally a ton of transparent cases from 2$ (incl. shipping).
Got mine also from there - took 3.5 weeks.
Hello everyone,
I wasn't expecting to be writing this so soon if I'm honest. Expected a few more days before I got rang by my wife whilst and work and asked what I'd ordered this time.
So the Orzly Pro-Fit Tempered Glass landed in my hands today (as well as their 5 pack film set, but I'll get to that later) and since we're having issues with the Official OnePlus TGSP it made sense to remove that and get straight into this protector and find out whether it's worth you lot purchasing.
A quick disclaimer I'm writing this after applying the glass and using it for a few hours. I will keep you updated in the comments below over the next week on how it holds up.
So, how does this differ to the Official 3D screen?
- Unlike the official 3D screen, Orzly have opted for adhesive on the sides and the top but not in the middle. This was an issue with their V1 screen last year as the Dot Matrix and Oil slicks were an absolute nightmare, less so with V2. After spending a few hours with this one, I can already tell they've made some significant improvements. It feels more premium than the OP3 screen did, I can't see the dot matrix under my house lighting at all and no oil slicks.
- They have incorporated cut outs for the front facing camera and sensors. The official one just has clear glass over them.
My verdict: Buy this one.
I haven't tested many yet (infact just the official and this) but if the choice is between the two like it was last year, this one wins for me. It doesn't cut into your screen and it seems like it'll work with most cases as the fitting of it is very good.
It's also a TON cheaper than the official one and its a twin pack.
Where can I buy?
As far as I'm aware they sell on the various local Amazon sites. Two of the big ones I use are Amazon.com and Amazon.co.uk
Take a look at my video here if you want to see it in more detail:
Ordered. Thank u.
---------- Post added at 01:40 AM ---------- Previous post was at 01:30 AM ----------
Ordered. Thank u.
fracman said:
Ordered. Thank u.
---------- Post added at 01:40 AM ---------- Previous post was at 01:30 AM ----------
Ordered. Thank u.
Click to expand...
Click to collapse
No worries
Great video as usual! Thanks for sharing this! Glad I didn't pay the £18 for the official one after all the bad reports on it, waiting for my orzly one to come now!
I hope I will be able to fit it in this case
Silicone TPU bumper case
@niijonodhg you just saved me $30, thanks! I subscribed to your channel, too
Thanks for this, just confirmed what I was hoping. Another quailty product from Orzly. I still can't fathom why OnePlus made such a terrible screen protector and charged people more for it.
Ph0enix_216 said:
@niijonodhg you just saved me $30, thanks! I subscribed to your channel, too
Click to expand...
Click to collapse
Thanks
dodged a bullet there, thanks mate :good:
Hmm says won't deliver till July 20th +
Thanks!!! I'll give it a try.
I bought a clear one off amazon before this one was available. It should be here by Friday. If it fits and looks as good as yours, i'll provide a link. If not, I'll buy this one. Thank you for the review!
NightMean said:
I hope I will be able to fit it in this case
Shockproof-Silicone-Slim-Hybrid-Case-Soft-Bumper-TPU-Cover-For-OnePlus-5-3-3T
Click to expand...
Click to collapse
Be sure to let people know when you try it,. According to what the actual manufacturers are saying about them though, they have written the following...
PLEASE NOTE: The Pro-Fit Glass Screen Protector is designed to work with Orzly Cases for the Oneplus 5. We cannot however guarantee its compatibility with OnePlus 5 cases from other manufacturers
This doesn't mean that it won't fit another case, but it does mean it's risky. So probably a good idea is if anyone on here tries different cases with this screen protector that we let as many people know on here which ones fit with it versus which ones didn't, as that may be our only way to truly guage this. The Orzly screen protector definitely seems like the only tempered glass screen protector that works well with the phone, so whatever I do I'm going to need to base my case around what works with that, so the more info I could get on this, the better. (I'll probably just get one of orzly 's cases anyway at first just to be sure, but would be nice to know what all the options are for later on (if there are any)
AnabolicAndroidz said:
Be sure to let people know when you try it,. According to what the actual manufacturers are saying about them though, they have written the following...
PLEASE NOTE: The Pro-Fit Glass Screen Protector is designed to work with Orzly Cases for the Oneplus 5. We cannot however guarantee its compatibility with OnePlus 5 cases from other manufacturers
This doesn't mean that it won't fit another case, but it does mean it's risky. So probably a good idea is if anyone on here tries different cases with this screen protector that we let as many people know on here which ones fit with it versus which ones didn't, as that may be our only way to truly guage this. The Orzly screen protector definitely seems like the only tempered glass screen protector that works well with the phone, so whatever I do I'm going to need to base my case around what works with that, so the more info I could get on this, the better. (I'll probably just get one of orzly 's cases anyway at first just to be sure, but would be nice to know what all the options are for later on (if there are any)
Click to expand...
Click to collapse
I'm planning on making another video, just as soon as a bunch of cases arrive! But if someone else can get to it sooner, then please do!
Thanks a lot for the video. Nice to hear it doesn't cut into the sides of the screen like others. What's your opinion on how deep the fingerprint scanner feels in the cutout?
Seems that Orzly is shipping them from the UK... found a similar one that ships from the united states - https://www.amazon.com/s?keywords=Oneplus+5+Screen+Protector&hidden-keywords=B07378RSWD. I've used amfilm a lot before- never any issues at all.
biglilsteve said:
Thanks a lot for the video. Nice to hear it doesn't cut into the sides of the screen like others. What's your opinion on how deep the fingerprint scanner feels in the cutout?
Click to expand...
Click to collapse
I've not really noticed it, the cut out is slightly wider than the the fingerprint sensor so leaves a good gap around it.
Augman said:
Seems that Orzly is shipping them from the UK... found a similar one that ships from the united states - https://www.amazon.com/s?keywords=Oneplus+5+Screen+Protector&hidden-keywords=B07378RSWD. I've used amfilm a lot before- never any issues at all.
Click to expand...
Click to collapse
I had a small issue with the amFilm TGSP for the Nintendo Switch not staying on the Switch properly under heat. But other than that it was reasonably OK.
niijonodhg said:
I've not really noticed it, the cut out is slightly wider than the the fingerprint sensor so leaves a good gap around it.
Click to expand...
Click to collapse
Thanks sir.
Sent from my ONEPLUS A5000 using Tapatalk
niijonodhg said:
I had a small issue with the amFilm TGSP for the Nintendo Switch not staying on the Switch properly under heat. But other than that it was reasonably OK.
Click to expand...
Click to collapse
I've heard that that is from the dock. My son has the Switch and we had that issue. They sent a free replacement that worked for him. Might be worth sending an email.
So Orzly is better because it dont cut the screen like OP official tgsp?
For me i think Oneplus own is better because adhesive on entire visible part, even when it comes about 0.3mm top of sides. I have used Orzly products many years. V2 for OP3T was disappoined mostly thanks to glue on borders only. Screen wont look that clear as with tgsp with full adhesive or without tgsp at all. Also oil slick can come because adhesives only on sides. It depends how greatly you clean your screen.
Sent from my OnePlus5 using XDA Labs