i accidentily sytem wiped my vs985 and lost the cm11 .zip file and now i have no OS
Im still in TWRP from bump and REQUIRE IMMEDIATE ASSISTANCE
Haha ummm, download a ROM to an SD card (buy a cheap small one if you don't have one, to save yourself in situations like this), put it in, install that beast.
Diddler Thankyou said:
i accidentily sytem wiped my vs985 and lost the cm11 .zip file and now i have no OS
Im still in TWRP from bump and REQUIRE IMMEDIATE ASSISTANCE
Click to expand...
Click to collapse
Didn't know Verizon had ext.sdcard
Otg "on the go cable" Rom to a flash drive insert in to cable. mount Otg in recovery and bam in tha biness
WHATSAMATTA U ALUMNI
deathsquad737 said:
Didn't know Verizon had ext.sdcard
Otg "on the go cable" Rom to a flash drive insert in to cable. mount Otg in recovery and bam in tha biness
WHATSAMATTA U ALUMNI
Click to expand...
Click to collapse
What carrier you have doesn't matter... all versions of the G3 has an sdcard slot, which you can use if you have an external sdcard. It supports up to 128GB.
OP, just download a new ROM file on a computer and put it on a microsd. TWRP can install it from that.
SDCARD
when did verizon get a external sdcard?i havent seen any external sdcard vs985
edit:nevermind you are right
hey guys, I did the same as the OP. I tried loading an OS onto an SD card and I cant it to mount in TWRP. what am I doing wrong??
edit- got it working again, thank you guys!!
Follow up:
If you ever do this, listen to the posts above...
After i flashed it from the ext sd, all my syst files are on my sd card... Its only 8gb and im running low on space... Should i install the zip onto my int and gp to twrp, wipe the ext then flash from the int?
Diddler Thankyou said:
Follow up:
If you ever do this, listen to the posts above...
After i flashed it from the ext sd, all my syst files are on my sd card... Its only 8gb and im running low on space... Should i install the zip onto my int and gp to twrp, wipe the ext then flash from the int?
Click to expand...
Click to collapse
After you've flashed the zip, you don't need to keep that zip on your phone at all anymore. The OS is installed and you're all good. I mean, you should keep it on an external sd, in case something like this happens again - but you don't have to. If you're low on space, delete the original zip, but make a backup in TWRP - that is more handy to have anyway.
laurasaurisrex said:
After you've flashed the zip, you don't need to keep that zip on your phone at all anymore. The OS is installed and you're all good. I mean, you should keep it on an external sd, in case something like this happens again - but you don't have to. If you're low on space, delete the original zip, but make a backup in TWRP - that is more handy to have anyway.
Click to expand...
Click to collapse
Is this the same with any downloads such as roms , addons, modems, hotspot provisions and the like, once they are in TWRP Recovery can I delete them from my phone /sd/ downloads and they remain in TWRP?
They aren't in TWRP recovery, they are installed into your phone, replacing stuff that was already there. The zip archives are just downloaded so TWRP can be used to install (flash) them. Those archives don't run in your phone. You can delete them and re-download them later if you ever need to flash them again (not likely).
Format your SD cards as fat32 - you'll need a tool to do so (just Google it, or look on this forum in the TWRP thread). Alternatively, you can use the "push" command from a computer through ADB to send a file directly to your phone's internal memory. You can Google that up as well. Actually, I did that one for you...
https://www.google.com/search?q=twrp+system+wipe+adb+push
Related
Hey guys, I recently got the Galaxy SII. Its rooted running Android 2.3.5 GINGERBREAD.DUKJ1.
My issue is trying to run ZIP files from my SD card using ClockWorkMod. I put the files into the SD card root folder and then boot into CWM. When I go run zip file from SD card there is nothing there. CWM cant see any of my files.
I have sucessfully booted ZIPS by placing them in the Phone folder instead of the SD card folder. If I go into My files and then under sdcard/external_sd I can see the file I put on there. CWM just refuses to see these files. When I connect my phone I see 2 folders, Card and Phone. I am putting these zip files in Card. I assume this is correct? Can anyone help?
Cheers
mount ur int sd card
Thanks for the reply, while waiting for a reply I unmounted the SD card, formatted it and then remounted it. I dropped another zip file, once again made sure I could see it in file manager and it was there. Booted in CWM, went to install zip file, went to ext_sd folder and it still says no file found. Under storage the SD card is listed there. Any ideas?
Gom24 said:
Hey guys, I recently got the Galaxy SII. Its rooted running Android 2.3.5 GINGERBREAD.DUKJ1.
My issue is trying to run ZIP files from my SD card using ClockWorkMod. I put the files into the SD card root folder and then boot into CWM. When I go run zip file from SD card there is nothing there. CWM cant see any of my files.
I have sucessfully booted ZIPS by placing them in the Phone folder instead of the SD card folder. If I go into My files and then under sdcard/external_sd I can see the file I put on there. CWM just refuses to see these files. When I connect my phone I see 2 folders, Card and Phone. I am putting these zip files in Card. I assume this is correct? Can anyone help?
Cheers
Click to expand...
Click to collapse
Sounds like you are using version 4.x of CWM, this does not support native updating from dual memory (So it only ever looks at phone memory, while you can manually mount and then update it's not as simple a process and often steps get forgotten)... if you just update to the newer CWM you will see another option appear on the list (apply update from internal memory)... making it much clearer and easier to update. (Or just use your phone memory to hold the zip files, it really doesn't matter that much)
I think you are right, it says v4.0.0.2. Would someone be kind enough to point me to where the latest version is?
Edit- nevermind I think I found it.
Thanks guys
Gom24 said:
I think you are right, it says v4.0.0.2. Would someone be kind enough to point me to where the latest version is?
Click to expand...
Click to collapse
CF-Root: CF-Root & CWM 5 for KJ1 ROM's
From: [25.01.2012][CF-Root 5.2] K/EFGHIJKL*, KP1/2/4/8/A, LA2, LP1/2/6 -su+bb+CWM4/5
Do you have USB debugging on?
Settings - Applications - Development
arzku said:
Do you have USB debugging on?
Settings - Applications - Development
Click to expand...
Click to collapse
This question is not relevant, as he is referring to Recovery Mode. (Debugging is only optional through normal OS, and can not be changed in recovery without rebuilding the kernel)
Everything is all good guys, the new version of CWM allows me to boot from my SD card and it installed ICS perfect. Thanks again
I want to install CM7 internal rom but fail to boot from SD after I increase the card space to full capacity. The screen remains black for 20-30 seconds after plugging the cable. And then it will bypass the CWM and launch directly to rooted OS. However, I cannot place the ROM without resizing the card space.
One more question: is it safe to remove the SD card after the system is booted into CWM mode?
Any advice to install CM7 will be much appreciated
Thanks in advanced.
adlist said:
I want to install CM7 internal rom but fail to boot from SD after I increase the card space to full capacity. The screen remains black for 20-30 seconds after plugging the cable. And then it will bypass the CWM and launch directly to rooted OS. However, I cannot place the ROM without resizing the card space.
One more question: is it safe to remove the SD card after the system is booted into CWM mode?
Any advice to install CM7 will be much appreciated
Thanks in advanced.
Click to expand...
Click to collapse
Yes, Then just put another card in and zip off of that .
adlist said:
I want to install CM7 internal rom but fail to boot from SD after I increase the card space to full capacity. The screen remains black for 20-30 seconds after plugging the cable. And then it will bypass the CWM and launch directly to rooted OS. However, I cannot place the ROM without resizing the card space.
One more question: is it safe to remove the SD card after the system is booted into CWM mode?
Any advice to install CM7 will be much appreciated
Thanks in advanced.
Click to expand...
Click to collapse
I had the same issue with a few cwm image files. Finally found the cwm files in zip format. Then I just copied them to the root of a blank SD card. I will try to zip them and upload them somewhere tomorrow. Its nice to have an 8gb cwm card.
Thanks guys. Yes a 8gb CWM image will be useful. Anyway, I just copy the CM7 beta zip file to the device internal memory and get it installed. Despite some technical errors (like google play not working), CM7 runs fine basically.
Ugh. Managed to trash my partitions and spent the most of the night learning a crash course of adb. Got things back to normal now. Will try to find my SD stuff tomorrow! Sorry for the delay!
Sent from my Nook Tablet using xda app-developers app
EDIT! --
Right, so FINALLY got my NT back to proper working order.
I'm pretty sure I downloaded this file FROM these forums, however, a few searches turned up nothing, so I dropboxed them.
Here
Format your SD card, giving yourself the full partition to work with. Then unzip that file, and copy the contents (4 items, 1 folder) to the ROOT of the SD card.
That will make your SD card bootable, and acutomatically load the CWM recovery stuff. From there, you can backup your NT's current config.
Also, RE: your Google Play issue, you need to install the proper Gapps for your ROM,
To do that, click HERE then go down to the bottom of the first post, that's Veronica, and she rocks. I've learned more from her about all this stuff than most anyone else, and we've never talked.
ANYHOW. Go to the bottom of her post, and see her "My XDA FTP" link? Click that ( I didnt want to direct link it without her permission).
In there, you'll see a folder called gapps, navigate to there, and down load the gapps-gb-20110828... zip file. Copy that to your shiny, new CWM recovery SD card, and then boot from it, "install zip from SD card" "choose zip" choose that zip file, install it, and you'll have access to the google play (after market updates automatically) and all the other google features!
Hi SGP users!
Last night, I installed the Jellybean CM10 ROM (the Nightly one). I also installed the GApps that came with the post. So I booted to Recovery Mode, I tried installing the ROM (Install zip from sd card>Install zip from internal sd card>downloads>the jb rom), but it says "INSTALLATION ABORTED". I repeated to install but to no avail. I rebooted the system to research on this, and the user said that you have to format system and try again. I booted to Recovery Mode again, formatted the system (it says system formatted or something like that), and installed the ROM for the nth time. It still says INSTALLATION ABORTED. Now, I tried installing the GApps zip file, and it worked (I installed the zip file because I want to know if all the files on the internal sd card are broken). So I tried installing the ROM again. Aborted. I rebooted the system, and now it's stuck with the white Samsung text! I don't know why, so I just drained the battery with the Samsung text still ongoing.
Today, I'm pretty sure the battery is drained (there's no text anymore), so I tried charging it. Nada, it's stuck with the loading logo on the battery image.
I think my device is bricked, I don't know. I researched it and all I found was the BootLoop. Is that the error on my SGP? I want to know if my device is bricked, and what caused this. Help?
Its not a brick..reboot to recovery (home + volume up + power ) and install some ics rom for player ..boot to that rom and then go again to recovery and install jb rom.That is offcourse if you have 5.0
Sent from my Nexus 7 using xda app-developers app
Thanks, and one more question: Is it okay if I download the ROM zip from my computer and just transfer it to my player with Download Mode? Because I can't open my player, just to Download and Recovery mode.
HeyyahAndrea said:
Thanks, and one more question: Is it okay if I download the ROM zip from my computer and just transfer it to my player with Download Mode? Because I can't open my player, just to Download and Recovery mode.
Click to expand...
Click to collapse
transfer the zip files to your SD card; use those files to flash. Also, now, can you get into recovery/download mode? Like after having removed the player from the USB?
just curious- did you originally download the ROM/app package to your device (ie /mnt/sdcard/????) and flash, or did you place the files in the SD card (ie /mnt/sdcard/external_sd [or something like that]) before flashing?
===
Edit: Ok, so literacy kicked in and I carefully read your OP. My guess, and I could be wrong, though I doubt it, is that the installation aborted because you flashed the packages from your internal SD and NOT your external SD (ie the actual SD card). Since the ROM rearranges directory tree (or whatever), it would stand to reason that the installation aborted during the installation process since it could no longer locate the zip. Ie it is no longer /mnt/sdcard/downloads (or wherever), but rather /storage/sdcard0/downloads. I'm guessing that CWM bypasses this and accesses your SD card directly, rendering installation from your actual SD card immune to these effects.
So, try again (assuming your device can still go into CWM recovery) and flash the packages in the proscribed order, but this time, from the ACTUAL SD card, and NOT internal. I "upgraded" directly from a GB rom, having flashed the zip files from the external SD card, and suffered no problems, so I know it isn't necessary to go through ICS. Good luck!
This is a helpful one! I'm sorry, but one last question, (I'm a newbie sorry!) how do you move the zip files to the external SD Card? And if I do that, and it flashed successfully, do I have to start again if I remove my SD card? Really sorry for the questions, but I really want to know.
Thank you so much! Since my computer didn't recognize my SGP (suckish USB cable lol), I placed my external SD card on my cellphone and plugged the cellphone into the computer to download the zip files (I downloaded them directly to the card). Afterwards I placed my SD in my SGP and flashed--It's working, thank you!!!
HeyyahAndrea said:
This is a helpful one! I'm sorry, but one last question, (I'm a newbie sorry!) how do you move the zip files to the external SD Card? And if I do that, and it flashed successfully, do I have to start again if I remove my SD card? Really sorry for the questions, but I really want to know.
Click to expand...
Click to collapse
All you need to do is use a file manager to move zip to sdcard1. Make sure you follow the steps in op of rom.
Sent from my YP-G70 using xda app-developers app
Thanks for the tip! I switched to JB ParanoidAndroid already because the Gapps on CM10 Nightly don't appear. Thank you anyway!
Forgive my blinding ignorance and noobiness.
I have been off the forums for some time. I have been running an old version of Paranoid Android off an SD card since December. (Thank you iamafanof...........I've been using your first incarnation of PA all this time!) Finally, I have a bit of time and energy to update my ROM.
When I first created this SD card running the PA ROM, I had to download to my computer four files..... two ROM zips: (one internal and the SD version), boot.zip and GAPPS. I then had to use my computer to place files in the boot partition of my newly partitioned card (I used SD Formatter for that), first swaping files from the SD zip into the Internal zip of the ROM and GAPPS as originally described in the CM7/CM9/CM10 post (these instructions have been repeatedly posted all over the forum and digimax wrote me a handy tutorial back then....thank you digimax, I get how to do that). Here's my question:
Is there an easier way to update the ROM on the card I am using (i,e., do I have to go through all that again)? I see that the developers are still posting Internal and SD versions of the ROMs and boot.zips for updated ROMS. In my dreams, I wish I could just go to GOO images on my NT, download a new, ready made SD.zip ROM into my boot partition somehow, wipe dalvik and system, data 1 partitions , and use cyanogen mod options to install the fabulously ready pre-prepared SD ROM.zip and a handy GAPPS. Right? OK, back to reality. Bottom line, my computer up is a piece of crap running windows 98 so I can't download from GOO images with it (old version of explorer) even in compatibility mode...I will have to download onto my NT, move the files over...yada yada yada and so on.
I understand very little about development. No offense meant to the developers who work so hard to keep us all in ROMs, I don't expect my fantasy about the SD ROMs to happen. If I have to "go through all that" again, no big deal, I just wanted to be sure I wasn't missing anything about an easier way for me to update my ROMs. Can I somehow prepare a new card using my rooted NT instead of having to mess with my computer? Any links available on how to? Just a hint would be fine. I'm willing to learn since there is no new computer in my immediate future.
Please don't respond just to blast me about reading the forums and so on. I am not just lazy, there is a good reason for me to be asking for a bit of assistance. If you don't have anything nice to say, I would prefer you didn't say it at all.
Thanks.
Sent from my Barnes & Noble Nook Tablet using xda app-developers app
I'm a little confused over what it is you want to do. Do you want to run from sd or do you want to install internally?
If you want to run from sd there are ready made images to download at Iamafanof website. Just download and burn!
The talk about flashing, wiping Dalvik suggests you want to make an internal install. If that indeed is the case then you need cwm version 6.x.x. If you have that, then it's as simple as booting into cwm and install Rom and gaps that you have put on your card.
Sent from my GT-P7300 using Tapatalk 2
snooch6923 said:
...
Is there an easier way to update the ROM on the card I am using (i,e., do I have to go through all that again)?
...
Click to expand...
Click to collapse
To update from your current PA ROM build to a newer build, you only need to download the SDC version of the zip archive files for the new ROM build and the corresponding Gapps onto your SD boot partition, and flash them using SD CWM recovery (steps 7-12 in http://forum.xda-developers.com/showthread.php?t=2098419). You only need to wipe /data if the two ROM builds have different android base versions (e.g., 4.2.1 vs. 4.2.2).
Although I have not done it, you should be able to download the zip files directly onto the SDcard boot partition (/sdcard).
Thank you asawi and digimax. Yes asawi, I want to continue to run off the SD card. I guess wipe dalvik only applies to internal (didn't know), I will educate myself on that. Digimax...again, you understood my essential question and came to my rescue. Thank you again for taking the time to respond!
Snooch
Sent from my Barnes & Noble Nook Tablet using xda app-developers app
snooch6923 said:
...
I guess wipe dalvik only applies to internal (didn't know)
...
Click to expand...
Click to collapse
Cache & Dalvik apply to both, and the same /cache partition on emmc is used whether you are running a ROM on emmc or on SD card. You should wipe Cache/Dalvik when flashing a new ROM build (although I myself don't always do it ).
Thanks again digimax, that saved me some time and helped me understand why I thought that (wipe dalvik/cache and possibly data 1) was necessary. OK so the System partition wiping was dumb.
{EDIT POST: I downloaded the PA 3 ROM SD.zip and PA 3 GAPPS.zip files and used .zip viewer and I now see that boot.img and recovery.img are in the SD ROM.zip (as indicated in iamafanof's PA 3 ROM post) so I answered my own questions below! (For anyone reading and following this that was interested, I am answering my own questions below just in case it helps someone else.}
So to clarify as I was just reading the thread this post came from:
http://forum.xda-developers.com/showpost.php?p=36685310&postcount=1
{EDIT: Forget this post...not applicable for THIS ROM}
1.) Question: I do NOT need to extract boot.IMG, recovery.IMG (flashing boot.IMG, mlo) from the updatd SD.zip and copy to SD boot partition? (I see that correct voldfstab and updater are now incorporated into SD.zips, which means if I was to be able to collect enough beans to buy an new 32GB SD card, I could set up partitions on the new card and not have to swap voldfstab and updater the way I used to?).
1) Answer: NO MORE SWAPPING those files. Dreams do come true!
2) QUESTION: Since for now I want to update my current card, I just need to somehow get PA Updated SD.zip and PA Updated GAPPS.zip onto boot partition and flash them with cyanoboot? Why does that not sound correct to me? Did I misunderstand you? Does this mean the original boot.IMG, recovery.IMG and so on stay the same with the Updated PA ROM (as the thread I have referred to in connection with the updated CM10 builds says at minimum usually boot.img and possibly recovery.IMG need to be changed.)?
2) ANSWER: The update PA 3 ROM SD.zip folder contains the necessary boot.img and recovery.img files. These will I believe overwrite the old ones on the boot partition (I hope) when I install the new ROM using cyanogen mod Install Zip from SD Card.
Geez I hope I am making sense here! I read that thread because I wanted to understand the principal behind what you had instructed me to do and also I stumbled on it while trying to find out how to access the boot partition on the SD card for download from my NT.
3) QUESTION: (If I boot into my rooted emmc, would I be able to see the boot partition on the SD card and then download directly to it as you suggested was possible?)
3) ANSWER: Yes, once booted into emmc with SD card left in (choose Internal Boot in cyanogen mod or just don't click SDC boot) as long as you are rooted, you can see the boot partition using a file manager (I use ES Explorer). I am going to download the zips directly to the SD card boot partition by booting into my rooted emmc, then boot into cyanogenmod and install the zip files using SD Card (I have CWM already updated and installed on SD Card).
Note: iamafanof (succulent)suggests in his PA 3 OP that prior to installing GAPPS.zip, you fix permissions. Also, as a reminder, heed digimax's note to clear data if necessary (see his above post).
Will let you all know how it goes! Thanks again digimax!
Snooch
Sent from my Barnes & Noble Nook Tablet using xda app-developers app
snooch6923 said:
...
OK so the System partition wiping was dumb.
Click to expand...
Click to collapse
/system automatically gets reformatted (aka "wiped") as part of the ROM flashing.
Note that to wipe /data partition on SD card, use the "wipe data1" item on CWM recovery menu. You'll need to use one of Succulent/iamafanof's more recent CWM versions such as cwm_6.0.2.8_acclaim_recovery_sdcard.img (available at http://goo.im/devs/succulent/acclaim/recovery) as older versions do not have this "wipe data1" option.
...
1.) Question: I do NOT need to extract boot.IMG, recovery.IMG (flashing boot.IMG, mlo) from the updated SD.zip and copy to SD boot partition?
Click to expand...
Click to collapse
The boot.img and recovery.img inside the SD ROM zip file will be flashed onto the SD card /boot partition (replacing any corresponding existing copy on the partition).
For the NT to boot into SD card CWM recovery you need to have in the /boot partition: MLO, u-boot.bin, flashing_boot.img (aka Cyanoboot) and recovery.img. If they are already there you don't need to replace them.
...
2) ANSWER: The update PA 3 ROM SD.zip folder contains the necessary boot.img and recovery.img files. These will I believe overwrite the old ones on the boot partition (I hope) when I install the new ROM using cyanogen mod Install Zip from SD Card.
Click to expand...
Click to collapse
Yes.
3) QUESTION: (If I boot into my rooted emmc, would I be able to see the boot partition on the SD card and then download directly to it as you suggested was possible?)
3) ANSWER: Yes, once booted into emmc with SD card left in (choose Internal Boot in cyanogen mod or just don't click SDC boot) as long as you are rooted, you can see the boot partition using a file manager (I use ES Explorer). I am going to download the zips directly to the SD card boot partition by booting into my rooted emmc, then boot into cyanogenmod and install the zip files using SD Card (I have CWM already updated and installed on SD Card).
Click to expand...
Click to collapse
There is no need to boot into rooted stock ROM in order to access the SD card /boot partition, you should be able to access it while running CM off SD.
Thanks Digimax. Yes, "wipe". That was a case of my losing a word, it happens sometimes. :banghead:
As you can see I have been trying to figure this out for myself. I hate having to ask and ask questions, and you have been extraordinarily kind and patient. I really appreciate that! I saw in a much earlier thread, just after you had written up those instructions for me for the first PA ROM, that you moved the instructions to this site and others had similar questions to the ones I had. That made me feel better about having had to ask the first time around
Of course once again I had trouble getting my point across when I asked the question here. :banghead:
I am really tired right now, up too late. I have another question, but I want it to make sense and not much does right now! (I had written this post with a question but in editing it deleted it because my brain began melting and I don't think I was making sense!)
Maybe tomorrow I will see things more clearly!
Sent from my Barnes & Noble Nook Tablet using xda app-developers app
OK, I'm back after lots of reading, but still stuck.
I want to install the updated CWM 6.0.2.8 as suggested on my SD card ROM, so when I go into SDC Recovery I get that ( I am now getting CWM 5.x.x.x). I believe that came preinstalled with the original PA ROM as I don't recall doing a manual install of it.
I downloaded the 6.0.2.8 zip from the link you provided. As I understand it, I need to place that zip in the root of the SD card, rename it "update.zip" and then select Update Zip from SDC Recovery. (Or, don't rename it and select install zip, correct?)
Here's the problem, which is the same problem I will have when trying to flash (install) the updated PA ROM: I don't know how to put the zips in the "root" (i.e., not enclosed in any folder, in the SDC boot partition) using only my NT (without my computer). I'm not even sure if I did boot into stock rooted that I could successfully do this, it is just what I mused I could do if nothing else. I also thought I might use GOO to flash the new ROM/GAPPS but worry that although the app is installed on my SD card, it is set by default to install on emmc and would not do what I intend.
Anyway, digimax, now for me it's the principal of the whole thing! You seemingly implied that it was possible to download the zips directly into the SDC root (boot partition as described above) or copy them into it using my NT only while running the old PA on my SDC, but I can't figure out how. Logic tells me that I should NOT be able to download or copy files into the boot partition while I am running the SD ROM (my logic so there's that).
Obviously, I've wasted enough time trying to figure this out that I could have just plugged in to my computer and avoided all this nonsense. So, that is my next step. But, since I often get like a dog with a bone when I can't figure something out, am I missing something really obvious here?
I don't want to waste any more of your time just because my computer sucks. It is possible for me to download the zips on the NT from GOO and move the files to the computer, and then just copy the zips into the root via the computer and I am going to do that. If I am missing something here that is not just incredibly stupid but might inform others and you have the time to respond, that would be great. If not, no worries! You have been awesome and I learned a lot from you and through my reading (I understand how to use cyanoboot MUCH better, so it was all worth it!
Thanks again!
Snooch
Sent from my Barnes & Noble Nook Tablet using xda app-developers app
snooch6923 said:
OK, I'm back after lots of reading, but still stuck.
I want to install the updated CWM 6.0.2.8 as suggested on my SD card ROM, so when I go into SDC Recovery I get that ( I am now getting CWM 5.x.x.x). I believe that came preinstalled with the original PA ROM as I don't recall doing a manual install of it.
I downloaded the 6.0.2.8 zip from the link you provided. As I understand it, I need to place that zip in the root of the SD card, rename it "update.zip" and then select Update Zip from SDC Recovery. (Or, don't rename it and select install zip, correct?)
Click to expand...
Click to collapse
You don't need to rename the zip file to flash it.
Make sure though that you download the version for SDC and not the one for Internal.
Here's the problem, which is the same problem I will have when trying to flash (install) the updated PA ROM: I don't know how to put the zips in the "root" (i.e., not enclosed in any folder, in the SDC boot partition) using only my NT (without my computer). I'm not even sure if I did boot into stock rooted that I could successfully do this, it is just what I mused I could do if nothing else. I also thought I might use GOO to flash the new ROM/GAPPS but worry that although the app is installed on my SD card, it is set by default to install on emmc and would not do what I intend.
Anyway, digimax, now for me it's the principal of the whole thing! You seemingly implied that it was possible to download the zips directly into the SDC root (boot partition as described above) or copy them into it using my NT only while running the old PA on my SDC, but I can't figure out how. Logic tells me that I should NOT be able to download or copy files into the boot partition while I am running the SD ROM (my logic so there's that).
Obviously, I've wasted enough time trying to figure this out that I could have just plugged in to my computer and avoided all this nonsense. So, that is my next step. But, since I often get like a dog with a bone when I can't figure something out, am I missing something really obvious here?
I don't want to waste any more of your time just because my computer sucks. It is possible for me to download the zips on the NT from GOO and move the files to the computer, and then just copy the zips into the root via the computer and I am going to do that. If I am missing something here that is not just incredibly stupid but might inform others and you have the time to respond, that would be great. If not, no worries! You have been awesome and I learned a lot from you and through my reading (I understand how to use cyanoboot MUCH better, so it was all worth it!
...
Click to expand...
Click to collapse
There is a way to access the SD card /boot partition while running your current PA on SD but it would be a bit involved (basically you'd need to edit /etc/vold.fstab to get it mounted).
What I'd suggest is for you to use a File Manager app such as ES File Explorer (freeware from Google Play) while running your rooted stock ROM on the NT and see if the SDcard /boot partition is visible (you might need to get into the app's Settings menu to enable "Root Explorer" so that you can navigate around the whole file system). If the partition is visible you should be able to download or copy files to it.
Yup, that was my thought. Going to try that for kicks.
Thanks again!
Sent from my BNTV250 using xda app-developers app
I am a complete newbie to rooting. I followed the kingoroot guidelines and rooted my Idea Aurus 3 phone. Root was success. The next step I did was downloading custom recovery and cyanogenmod ROM from here to my memory card
I flashed the custom recovery with flashify. The next step I did was wiping all data from the device by entering in to recovery mode (including cache and everything)
I was hoping I could simply install zip from sd card. But when i click on this option, I cannot find my sd card nor zip file (I checked most folders including emmc, etc, sd-ext and couldn't find SD card. The custom recovery name is Phylz touch 6
Now basically I have a phone without OS and all I can do is accessing custom recovery. I don't have a back up too
I can also see an error log "Cannot mount custom path"
I formatted the memory card to exFAT from FAT 32 hoping that would work, it didn't help as well.
Also tried to connect phone to pc using USB (thinking I can move rom to system memory), but wouldn't detect phone memory
Now, is there any way to get this fixed? Any help would be awesome
Thanks!!!
Mount USB option is how you see phone from computer if I remember correctly I haven't used cwm in awhile I always use twrp
sent from my nexus 4 I also own a voyager tablet and an I-phone 4s
kumarj said:
I am a complete newbie to rooting. I followed the kingoroot guidelines and rooted my Idea Aurus 3 phone. Root was success. The next step I did was downloading custom recovery and cyanogenmod ROM from here to my memory card
I flashed the custom recovery with flashify. The next step I did was wiping all data from the device by entering in to recovery mode (including cache and everything)
I was hoping I could simply install zip from sd card. But when i click on this option, I cannot find my sd card nor zip file (I checked most folders including emmc, etc, sd-ext and couldn't find SD card. The custom recovery name is Phylz touch 6
Now basically I have a phone without OS and all I can do is accessing custom recovery. I don't have a back up too
I can also see an error log "Cannot mount custom path"
I formatted the memory card to exFAT from FAT 32 hoping that would work, it didn't help as well.
Also tried to connect phone to pc using USB (thinking I can move rom to system memory), but wouldn't detect phone memory
Now, is there any way to get this fixed? Any help would be awesome
Thanks!!!
Click to expand...
Click to collapse
download ur rom again.
put it on another sd card and flash the rom from sd.
or there's always a way to flash stock
If u were on philz 6, u cud just hit 'clean
to install a new rom ' and flash ur rom without wiping extra anything.
[email protected] said:
Mount USB option is how you see phone from computer if I remember correctly I haven't used cwm in awhile I always use twrp
sent from my nexus 4 I also own a voyager tablet and an I-phone 4s
Click to expand...
Click to collapse
Mount USB option is not there in the Mount section
Do you mean external sd card or internal SD card if you have a external sd card pop it out of your phone and use an SD card adapter on a pc and place the ROM and appropriate gapps on it
sent from my nexus 4 I also own a voyager tablet and an I-phone 4s
[email protected] said:
Do you mean external sd card or internal SD card if you have a external sd card pop it out of your phone and use an SD card adapter on a pc and place the ROM and appropriate gapps on it
sent from my nexus 4 I also own a voyager tablet and an I-phone 4s
Click to expand...
Click to collapse
I mean external sd card. The ROM is in external sd card, but i cannot see it in recovery mode.
Also, I just tried to sideload rom by using sdk tools.
The result i got was:
C:\Program Files (x86)\platform-tools>adb sideload cm-12-20150320-OFICIAL-5020.z
ip
loading: 'cm-12-20150320-OFICIAL-5020.zip'
* failed to write data 'protocol fault (couldn't read status): Connection reset
by peer' *
Remove sd card and reinsert it while in cwm and in twrp you mount partitions do the equivalent for cwm for your SD card and make sure your SD card is not corrupted
sent from my nexus 4 I also own a voyager tablet and an I-phone 4s
Resolved!! Yay!!
Finally, all fixed.
Let me explain what I did:
I was not able to see zip or sd card in recovery mode. So I pushed the zip file to data/media/0 and installed zip by browsing to that path.
I was not able to flash Cynogenmod, because during the process the reboot was in to my old logo, So I assume it was failure. Then I downloaded a stock rom of my phone model and pushed it to the same location and installed it.
Now, is working fine so far.
Thanks everyone!
[email protected] said:
Remove sd card and reinsert it while in cwm and in twrp you mount partitions do the equivalent for cwm for your SD card and make sure your SD card is not corrupted
sent from my nexus 4 I also own a voyager tablet and an I-phone 4s
Click to expand...
Click to collapse
I have to remove battery to insert card, so I cannot do that while in recovery mode. However I was able to push the zip to system memory with adb (sdk tools). Cynogen mod didnt work for me, so I used a stock one again
I will still search for a new version as this one is JB 4.1
Well glad you got it fixed
Sent from my iPhone 4s using Tapatalk I also own a g900v