Ok, so I have been running a Honeycomb rom but wasnt happy with it so I decided to try a different one. In the Roms directions, it said to be on a stock 1.2 rom. So I downloaded the one from its instructions and flashed. All went well, it booted into the stock rom with no problem. So I put the new HC rom on my sd and renamed to update.zip. I booted into recovery and noticed that the recovery was reverted back to the stock recovery. I thought, no big deal, Ill just flash the rom from that recovery. Well it kept aborting the install for some reason. Doesnt give an error, just says installation aborted. So I figured it was the recovery that was the problem. I downloaded CWM 0.8 and followed instructions, put the recovery folder and the update.zip on the sd card, I booted into recovery and the installation bar came up like it was installing, then switched back to the stock recovery. I assumed all went well and rebooted the device then powered off again and tried to boot into CWM, shows the three birds and the recovery key detected but doesnt go any further. I can power the device off and boot it back up into the stock rom but every time I try to boot into recovery, it does the same thing and gets stuck. Any help would be great.
CWM v8 isn't compatible with 1.2 branch.
My website here.
I installed TWRP on my phone, and went into Bootloader an hit RECOVERY so I can get to the program (the first time I did this it brought me to the TMRWP program). THIS time, it completely wiped my friggin' phone... after I sat there like 4 hours re-setting up everything PERFECTLY how I wanted it.
What's weird is it kept ALL my apps that I converted to SYSTEM APPS, but all my user stuff is gone.
Lesson learned... Don't click recovery from Bootloader.
That has yet to happen to me with any recovery and 3 devices currently with twrp. Might be a step missed with the install or maybe you left a bootloader update zip and ran it when you rebooted? Or it can be a bug as going to recovery from bootloader via a cold start is how to get there traditionally. I would email teamwin and try to sort it out or redo the recovery install, making sure to check the md5 of the file after you download it.
Sent from my Transformer TF101 using Tapatalk 2
Your supposed to click recovery at bootloader. Thats where you do backup, restore and flash new roms.
HTC Sensation z710e
ICS 4.0.3
Sense version 4.0
Software Sense-o-maniac v1.3
Kernel. 3.0.30 Bricked
Radio 11.68.3504
That's what I thought too. If I'm not mistaking, I flashed the new firmware after I did the TWRP, so maybe that screwed it up somehow. I take it TWRP must be the LAST image you flash? Only flashes I remember doing were:
Customize bootloader screen
TWRP.
firmware update
Do I need to re-flash the new firmware before re-flashing TWRP, or is the firmware going to remain no matter what I do from this point on?
Just adb flash recovery. Put the recovery image in your platform tools folder. Adb reboot bootloader. when you are rebooted adb flash recovery recovery.img.
Or use one of the many tools made to do that on our forums
Sent from my ADR6425LVW using xda premium
Well I went ahead and used the GOO Manager to flash TWRP again, and this time it worked fine. I'm going to re-setup my phone again then before I customize it back like I had it, going to try to get to recovery and see if it works.
With it now being installed, does that mean I can't flash anything directly from SD Card or modify the bootloader anymore without it causing problems?
What I mean, moreso, is... if I ever put factory reset. will it reload the factory rom + keep the newest firmware I installed (etc.) or do I nee to back up the phone with TWRP and recover from that when I want to load it back?
Factory reset just puts things back to the way they were without the stuff in the data partition or any user apps or settings. This means that say you flash a custom rom, it will reset to as if that custom rom was freshly installed since the custom rom has replaced the factory rom in the /system/ parition and anything else related to it.
With that said it is usually a good practice after rooting a fresh device to do the nandroid and then transfer it to a computer before you do anything else. Note that while you probably won't be switching recoveries a lot, that nandroid backups generally work only with the recovery that generated them so don't get them mixed up.
I created this thread because I have looked all over and have been unable to find someone with the exact same issue(s).
I said "sort of" in the title because twrp is working. Ok, so before everyone asks if I have nvflash, the answer is no. I did not have the right version of firmware, and did not try to install it originally. Since I was able to install roms, I figured I was fine...oops.
Twrp is not properly installing roms. More on that later. I am getting to the asus splash screen that says my device is unlocked, but it is stuck there.
My last working rom was the deodexed stock JB rom from craig gomez. I installed it with goo and when I installed that, I lost custom recovery and root, so I decided to go back to a more custom rom so Titanium backup would work. When I did that, I tried also tried again to make nvflash work. I got through the first step, it said it was successful, except I never got the little message in the upper left corner that I was supposed to get. I did not think it was a big deal because my prime would still boot like normal.
Then I installed twrp 2.3.1.0 and I have tried flashing previous restore images. I have tried installing the roms on my sdcard. I cannot get past the asus splash screen.
If I try installing a rom with the force md5 check enabled, it does detect an md5 and then quits.
If I try intalling a rom without the force md5 check, i get an error that says E:Unable to mount '/staging'
When I try installing a backup everything seems to work okay, but then I get the same error E:Unable to mount '/staging'
When I try to install roms through fastboot, I get the following errors:
archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt
When I try using adb, I do not see any devices.
I tried putting CWM on the prime to see if I could install from that instead, but it would not load after install.
I tried putting an older version of twrp on the prime, to see if that was the issue because I used to have an older version...I could not get that to load either...so I went back to this version.
Any ideas or suggestions would be awesome guys. I am stuck.
I even went to install the naked drivers again, and when I try to flash a different recovery, I get the <waiting for device> text that never goes away.
i'm sort of on the same boat. my prime just keeps booting into twrp recovery no matter what i tried. i'm still hoping to find a solution to this problem.
godlyitem said:
i'm sort of on the same boat. my prime just keeps booting into twrp recovery no matter what i tried. i'm still hoping to find a solution to this problem.
Click to expand...
Click to collapse
For me, I can let it try to boot normally, but I get stuck at the splash screen. This device is unlocked.
If I hold down the volume down button, I can go to fastboot, or RCK for recovery...but it does not work properly.
big time noob said:
For me, I can let it try to boot normally, but I get stuck at the splash screen. This device is unlocked.
If I hold down the volume down button, I can go to fastboot, or RCK for recovery...but it does not work properly.
Click to expand...
Click to collapse
i just tried to flash cwm in the terminal, it wrote stuff on the memory, but didn't seem to do anything. it booted straight back to twrp. i can't even get it to go to fastboot!!! only if i can go to fastboot, i could save my prime!!!
godlyitem said:
i just tried to flash cwm in the terminal, it wrote stuff on the memory, but didn't seem to do anything. it booted straight back to twrp. i can't even get it to go to fastboot!!! only if i can go to fastboot, i could save my prime!!!
Click to expand...
Click to collapse
Yeah, I thought that too, but fastboot does not work properly either...argh. I wish one of the gurus would chime in here.
Same Here.. It all happened when i restored my files using titanium backup and when i rebooted im stuck at boot scrren
EDIT: Guys I did a prime fullwipe and flashed stock jb and now prime is restored to its original state..
""I also got some errors like md5 file could not be found and could not find the /staging""..but after the reboot it works perfect
EDIT 1: Now after the prime fullwipe and flashing stock jb i flashed twrp recovery and now it works perfect without a single error even the above mentioned errors were gone
mercydia said:
Same Here.. It all happened when i restored my files using titanium backup and when i rebooted im stuck at boot scrren
Click to expand...
Click to collapse
EVERYONE i fixed it!!!!!!!!!!!!!!!!!! !!!! it's alive again!!!!!!!!!!!!!!!!!
godlyitem said:
EVERYONE i fixed it!!!!!!!!!!!!!!!!!! !!!! it's alive again!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
That doesn't really help us. If possible, can you edit/delete your message so that the guys that might help do actually help? Don't want them to think this is done.
Can you clarify what the Prime fullwipe is and how you got there?
I do not know if it will help me.
I can't even do the wipe command from fastboot.
Just says <waiting for device>
I have tried the wipe command form the boot screen (the one with fastboot and RCK as options), that did not work properly either.
Ryan
mercydia said:
Same Here.. It all happened when i restored my files using titanium backup and when i rebooted im stuck at boot scrren
EDIT: Guys I did a prime fullwipe and flashed stock jb and now prime is restored to its original state..
""I also got some errors like md5 file could not be found and could not find the /staging""..but after the reboot it works perfect
EDIT 1: Now after the prime fullwipe and flashing stock jb i flashed twrp recovery and now it works perfect without a single error even the above mentioned errors were gone
Click to expand...
Click to collapse
big time noob said:
Can you clarify what the Prime fullwipe is and how you got there?
I do not know if it will help me.
I can't even do the wipe command from fastboot.
Just says <waiting for device>
I have tried the wipe command form the boot screen (the one with fastboot and RCK as options), that did not work properly either.
Ryan
Click to expand...
Click to collapse
here is what i did. get into twrp recovery. flashed full prime wipe -> right after that flash the stock jb US version directly dled from Asus -> reboot then you will be stuck at the splash screen (that's a good news). Hold down power + volume down until your prime turns off and restart (keep holding those two keys) until the 3 icons appear then flash w/e rom you want in recovery. It's alive!
In twrp I do not see anything that says Full Prime Wipe. I see something that says wipe. Are those the same? I tried doing a wipe from this screen, but it did not work for me as expected.
godlyitem said:
here is what i did. get into twrp recovery. flashed full prime wipe -> right after that flash the stock jb US version directly dled from Asus -> reboot then you will be stuck at the splash screen (that's a good news). Hold down power + volume down until your prime turns off and restart (keep holding those two keys) until the 3 icons appear then flash w/e rom you want in recovery. It's alive!
Click to expand...
Click to collapse
big time noob said:
In twrp I do not see anything that says Full Prime Wipe. I see something that says wipe. Are those the same? I tried doing a wipe from this screen, but it did not work for me as expected.
Click to expand...
Click to collapse
no full wipe is a stand alone zip file you have to google and find dl it. put it in your prime then flash it
Thanks. That is what I needed to know.
I will see if I can make this work when I get back from work.
godlyitem said:
no full wipe is a stand alone zip file you have to google and find dl it. put it in your prime then flash it
Click to expand...
Click to collapse
I am pretty sure I am F***ed.
I tried the prime full wipe. It worked the first time, I think. Then went to install a rom.
I had to do both through external SD in twrp because my adb is not working. Also, fastboot only works to install a recovery. The only version of any recovery I can make work is twrp 2.3.1.0
If I try an older version or CWM, it freezes where I try to go into recovery.
Unable to mount data error.
Unable to mount system error.
Same as before.
I tried using unbricker software I found, but since adb does not work properly, the software does not work properly.
I am going to see if I can work my charm and get them to take back my tablet at best buy for an infinity. I have read about other people pulling it off.
I think as we get closer to xmas my odds improve...UNLESS SOMEONE HAS ANOTHER IDEA??? I would love to try something else.
Eyeballer suggested a chat room channel thing, but most of the people are in europe and I would need to do it in the morning...I do not have time for that, but I may try it.
big time noob said:
Can you clarify what the Prime fullwipe is and how you got there?
I do not know if it will help me.
I can't even do the wipe command from fastboot.
Just says <waiting for device>
I have tried the wipe command form the boot screen (the one with fastboot and RCK as options), that did not work properly either.
Ryan
Click to expand...
Click to collapse
Download the zip:
http://goo.gl/hiFHB
Goto to Twrp recovery and install the zip..Since it supports microsd u can transfer the zip to microsd.
Goto TWRP -> INSTALL -> CHOOSE EXTERNAL SD -> INSTALL THE ZIP
It will completely wipe the internal storage and then download the official STOCK JB FROM ASUS SITE and follow the same steps to install. Now install the latest twrp recovery using fastboot
big time noob said:
I am pretty sure I am F***ed.
I tried the prime full wipe. It worked the first time, I think. Then went to install a rom.
I had to do both through external SD in twrp because my adb is not working. Also, fastboot only works to install a recovery. The only version of any recovery I can make work is twrp 2.3.1.0
If I try an older version or CWM, it freezes where I try to go into recovery.
Unable to mount data error.
Unable to mount system error.
Same as before.
I tried using unbricker software I found, but since adb does not work properly, the software does not work properly.
I am going to see if I can work my charm and get them to take back my tablet at best buy for an infinity. I have read about other people pulling it off.
I think as we get closer to xmas my odds improve...UNLESS SOMEONE HAS ANOTHER IDEA??? I would love to try something else.
Eyeballer suggested a chat room channel thing, but most of the people are in europe and I would need to do it in the morning...I do not have time for that, but I may try it.
Click to expand...
Click to collapse
When I was doing the fullwipe the same errors happened to me.. But dont mind..I got errors like
1. No md5 file found
2. Mount error
3. Cannot find /staging
Just follow the above the steps ull get it right
did you even follow my step by step guide? you can move the stock rom from external SD to your internal SD in advance -> file manager.
godlyitem said:
did you even follow my step by step guide? you can move the stock rom from external SD to your internal SD in advance -> file manager.
Click to expand...
Click to collapse
Yeah, I should have said I tried that first. I also tried the stock rom from asus. When that didn't work, I tried the stock rom deodexed I found in goo.
There are a bunch of permission errors going on inside my prime. When I go into the mount area, it will not let me mount the data to move it. Or, when I try to copy it over I get a failed message.
Okay. I wiped it again, from twrp.
Then it let me move the file from the ext-sdcard to the sdcard.
I used the prime full wipe.
Then I tried to install the stock rom by transferring it in twrp file manager.
I got the file onto the sdcard, but when i tried to install, it said Failed.
That was it.
I even tried installing the ICS version I got from ASUS. Same thing.
Now, I am going to try to access via unbricker...don't know if it will work, but I am out of ideas.
godlyitem said:
did you even follow my step by step guide? you can move the stock rom from external SD to your internal SD in advance -> file manager.
Click to expand...
Click to collapse
Fixed?
I am alive!
us-tf201-jro03c-10.4.2.15-stock-deodexed.zip
That is the last rom I successfully used.
I used all sorts of different wipes. I was in twrp and noticed my pc installing the transformer adb driver. So I hopped into adb to see if it would see my device with that driver. (it did, but it wasn't before from the fastboot or adb commands with naked driver).
I tried sideloading the above rom from twrp. It worked.
Thought others might want to know.
I do not know if I can install other roms or not. I am a little scared to try just yet.
big time noob said:
Okay. I wiped it again, from twrp.
Then it let me move the file from the ext-sdcard to the sdcard.
I used the prime full wipe.
Then I tried to install the stock rom by transferring it in twrp file manager.
I got the file onto the sdcard, but when i tried to install, it said Failed.
That was it.
I even tried installing the ICS version I got from ASUS. Same thing.
Now, I am going to try to access via unbricker...don't know if it will work, but I am out of ideas.
Click to expand...
Click to collapse
big time noob said:
I am alive!
us-tf201-jro03c-10.4.2.15-stock-deodexed.zip
That is the last rom I successfully used.
I used all sorts of different wipes. I was in twrp and noticed my pc installing the transformer adb driver. So I hopped into adb to see if it would see my device with that driver. (it did, but it wasn't before from the fastboot or adb commands with naked driver).
I tried sideloading the above rom from twrp. It worked.
Thought others might want to know.
I do not know if I can install other roms or not. I am a little scared to try just yet.
Click to expand...
Click to collapse
You will have the jelly bean bootloader now so as long as you stick to it you should be fine. The only other thing I would suggest is check you version of twrp, you should be running the jelly bean version of it also. And if I am not mistaken, you need to be on ics to use nvflash (although I haven't checked the op recently so I could be wrong) so definitely stay away from that unless you downgrade.
So my tablet won't get past the Asus start up screen, but I did manage to get CWM working, problem is that I have no roms on my internal SD, because I wiped everything trying to fix stuff with WSG Flasher (didn't work).
I've tried everything, but I'm at a total loss here. adb won't work, even after I installed that dreadful Asus PC Suite, WSG FLasher doesn't work because adb doesn't work and
Code:
fastboot -i 0x0b05 flash somerom.zip
doesn't work either.
I've tried installing dozens of roms and CWM versions through fastboot, but none worked. The only CWM image that did work was called "recover-jb.img" that I got from here, though it's kind of useless if I can't install any roms.
Any suggestions, or should I just throw my tablet out?
Pepe1Vo said:
So my tablet won't get past the Asus start up screen, but I did manage to get CWM working, problem is that I have no roms on my internal SD, because I wiped everything trying to fix stuff with WSG Flasher (didn't work).
I've tried everything, but I'm at a total loss here. adb won't work, even after I installed that dreadful Asus PC Suite, WSG FLasher doesn't work because adb doesn't work and
Code:
fastboot -i 0x0b05 flash somerom.zip
doesn't work either.
I've tried installing dozens of roms and CWM versions through fastboot, but none worked. The only CWM image that did work was called "recover-jb.img" that I got from here, though it's kind of useless if I can't install any roms.
Any suggestions, or should I just throw my tablet out?
Click to expand...
Click to collapse
what were you doing when you started having trouble? are you on jb or ics bootloader where is the nvida on your splash screen?
whycali said:
what were you doing when you started having trouble? are you on jb or ics bootloader where is the nvida on your splash screen?
Click to expand...
Click to collapse
I was trying to install CM10, initially installing any CM rom would fail because CWM would say "assert failed, model is not tf201" (It is most certainly a transformer prime, I checked double checked) I edited the updater-script file in the .zip to skip the model check, after that installing the rom went just fine, it would just hang indefinitely on the splash screen.
The tablet is on the jb bootloader, the nvidia logo is in the bottom right corner.
Pepe1Vo said:
I was trying to install CM10, initially installing any CM rom would fail because CWM would say "assert failed, model is not tf201" (It is most certainly a transformer prime, I checked double checked) I edited the updater-script file in the .zip to skip the model check, after that installing the rom went just fine, it would just hang indefinitely on the splash screen.
The tablet is on the jb bootloader, the nvidia logo is in the bottom right corner.
Click to expand...
Click to collapse
let me get this straight. you can figure out how to change the updater.script but you insist on using cwm? Fastboot twrp to your prime and install a rom zip from your microsd.
whycali said:
let me get this straight. you can figure out how to change the updater.script but you insist on using cwm? Fastboot twrp to your prime and install a rom zip from your microsd.
Click to expand...
Click to collapse
Err, I didn't even know there was an alternative to cwm... At any rate, will twrp allow me to transfer files? My microsd is empty due a hardwipe I did.
Yes. TWRP Allows you to also flash zips from micro sd . Altrough I'm not sure can you install it from the situation you're in.
Sent from my GT-I9100 using xda app-developers app
Pepe1Vo said:
Err, I didn't even know there was an alternative to cwm... At any rate, will twrp allow me to transfer files? My microsd is empty due a hardwipe I did.
Click to expand...
Click to collapse
first you need the drivers for fastboot installed to your pc. you can accomplish this by following the advice given here.
http://forum.xda-developers.com/showpost.php?p=34477256&postcount=5703
Next you need a working twrp which will help you install a rom from your external microsd card. get that here. and follow his install istructions.
http://forum.xda-developers.com/showpost.php?p=34359560&postcount=5497
then I recommend grabbing this rom to install from your microsd using twrp.
AndroWook Prime Hairy Bean v1.4
www.gamerzxtreme.com/AndroWook_Hairy_Bean_v1.4_FINAL_1.zip
you should only need to follow these instructions from there.
Download AndroWook Prime Hairy Bean v1.4 from one of the links above and copy to either root of internal SD or micro SD.
Boot into recovery (TWRP) and wipe cache, dalvik cache and factory reset. You can wipe system as well if you want a total deep clean but do so at your own risk.
Select to install ROM from SD and follow on screen prompts.
When install completed allow 30-60 mins for the system to cache itself upon which time you should now have a nice smooth TP.
Enjoy!
Hi so after updating from the stock zv6 to lollipop update my phone won't install a custom ROM. Every time I try to turn it on it goes straight to TWRP and went I install a ROM or try to load a backup as soon as I hit reboot it goes back to the TWRP page. Amy ideas?
You must flash back, using Flashtool, to zv4, then reroot, then flash newest TWRP. OTA software not included, because they flash every partition of the phone, including the boot loader. Stock roms like zv6 and zv8(lollipop)or AOSP, must be flashed from xda from here on out, because they've been modified to work correctly on zv4 boot loader. TWRP and root access only work correctly with zv4 boot loader.
sent from my LG G3
It sounds like there is no OS installed or it is stuck a reboot-loop. Try pulling the battery out for 10 seconds and if it still goes into twrp you know that it isn't a reboot-loop. When you go to restore a rom and it has the bar that shows the amount of storage does it say "0 MB"? If it does it means that twrp can't mount the storage on the phone thus causing it to not install/reboot. Have you tried side loading a rom via adb? Are you trying to install a rom off of a sdcard? I have seen many issues in the past sdcard related.
If you can please answer the following:
1) What is the message you are getting from twrp (if there is any)?
2) Have you installed a custom kernel and if so witch one?
3) What twrp are you running (the bumped one from xda or from the official twrp site) and what version is it?
4) Have you tried adb and pulling the battery?
If you answer these questions they should be able to tell us all that we need to know in order to help you out.