Hello everyone .... I hv canvas 2 plus phone .. Some day before i flash a rom with currect procedure but it dint work . so i decided to flash my custom rom by Sp flash tool . i did it successfully but after rebooting ,i am getting Invalid Imei problem for both my sim slot . i searched on google to fix it and tried almost everything but its not working. I m stuck on Invalid Imei problem .
I tried :
imei Writer
Mtk droid
Imei.exe
Mobile uncle
I have heard of some nvram problem but couldnt fix it. I tried lots of other solution that i dont remember abt that.
Kindly help me asap with some working solution .
priyanshugpt486 said:
Hello everyone .... I hv canvas 2 plus phone .. Some day before i flash a rom with currect procedure but it dint work . so i decided to flash my custom rom by Sp flash tool . i did it successfully but after rebooting ,i am getting Invalid Imei problem for both my sim slot . i searched on google to fix it and tried almost everything but its not working. I m stuck on Invalid Imei problem .
I tried :
imei Writer
Mtk droid
Imei.exe
Mobile uncle
I have heard of some nvram problem but couldnt fix it. I tried lots of other solution that i dont remember abt that.
Kindly help me asap with some working solution .
Click to expand...
Click to collapse
Have a look over the post over XDA i.e. Permanent Solution I would say that should solve the problem you are experiencing !
already tried
promo87 said:
Have a look over the post over XDA i.e. Permanent Solution I would say that should solve the problem you are experiencing !
Click to expand...
Click to collapse
Thanks for ur reply . i have already tried this method but it dint work.first it dint show the OK msg but after some attempt give it show. so i reboot my phone but still after that its giving Invalid imei problem
Related
Hi Guys
i managed to brake my Imei and Recovery that again but now i have still the Problem that i have NO Service.
What can i do now ?
dubist said:
Hi Guys
i managed to brake my Imei and Recovery that again but now i have still the Problem that i have NO Service.
What can i do now ?
Click to expand...
Click to collapse
For now all u can do is STOP creating multiple threads for the same issue ma8
as its against XDA rules, try editing ur earlier thread by adding more INFO to the same
hi
i wanted yo instal miui on my huawei G610 - u20 but thanks to inpack mobile everything went wrong with mobile uncle and after rebooting my phone it went in bootloop.
after lots of reading and googling i have found a official firmware of my phone with sp_flashtool inside it with two different type :
SP_Flash_Tool_v3.1320.0.174_Secboot
and
SP_Flash_Tool_v3.1316.0.148_DLInfoV1-cust
i have followed all of correct procedure but in with sp_flash tool sec boot i encounter this error : to download code area is forbidden on this phone
and with sp_flash tool CUST it says( brom error : s_brom_download_da_failed )
and when i run a memory test it says ERROR : NAND FLASH WAS NOT DETECTED
I AM REALLY REALLY CONFUSED AND DIDNT FIND PROPER ANSWER TO THIS KIND OF QUESTION
what can i do right now?
if i format my phone in sp flash tool will it help?
Answer
is there any body out there to help me please im really stock
huawei g610-u20 bootloop
same problem here ooo, please developers help out
sp flash tool error SOLVED
Armanium said:
hi
i wanted yo instal miui on my huawei G610 - u20 but thanks to inpack mobile everything went wrong with mobile uncle and after rebooting my phone it went in bootloop.
after lots of reading and googling i have found a official firmware of my phone with sp_flashtool inside it with two different type :
SP_Flash_Tool_v3.1320.0.174_Secboot
and
SP_Flash_Tool_v3.1316.0.148_DLInfoV1-cust
i have followed all of correct procedure but in with sp_flash tool sec boot i encounter this error : to download code area is forbidden on this phone
and with sp_flash tool CUST it says( brom error : s_brom_download_da_failed )
and when i run a memory test it says ERROR : NAND FLASH WAS NOT DETECTED
I AM REALLY REALLY CONFUSED AND DIDNT FIND PROPER ANSWER TO THIS KIND OF QUESTION
what can i do right now?
if i format my phone in sp flash tool will it help?
Click to expand...
Click to collapse
i had the same problem bro! but what i did was to flash dat egypt firmware without the PRELOADER . and it worked.....
but the issue on ground now is that the phone is writing INVALID IMEI
but the phone will work with some network carriers!
i hope i've helped.......
funloft said:
i had the same problem bro! but what i did was to flash dat egypt firmware without the PRELOADER . and it worked.....
but the issue on ground now is that the phone is writing INVALID IMEI
but the phone will work with some network carriers!
i hope i've helped.......
Click to expand...
Click to collapse
can you plase post a link for this rom?
huawei g610-u20 stock rom
primux said:
can you plase post a link for this rom?
Click to expand...
Click to collapse
https://disk.yandex.ru/public/?hash=+LW/dwHLEePHkyWAFz1STiYZQQxjLEaYmDruPBrhVl0=
---------- Post added at 02:42 PM ---------- Previous post was at 02:38 PM ----------
thats the link! just click on the down arrow where you see скачать or google-translate the page as it is in russian.
Armanium said:
hi
i wanted yo instal miui on my huawei G610 - u20 but thanks to inpack mobile everything went wrong with mobile uncle and after rebooting my phone it went in bootloop.
after lots of reading and googling i have found a official firmware of my phone with sp_flashtool inside it with two different type :
SP_Flash_Tool_v3.1320.0.174_Secboot
and
SP_Flash_Tool_v3.1316.0.148_DLInfoV1-cust
i have followed all of correct procedure but in with sp_flash tool sec boot i encounter this error : to download code area is forbidden on this phone
and with sp_flash tool CUST it says( brom error : s_brom_download_da_failed )
and when i run a mermory test it says ERROR : NAND FLASH WAS NOT DETECTED
I AM REALLY REALLY CONFUSED AND DIDNT FIND PROPER ANSWER TO THIS KIND OF QUESTION
what can i do right now?
if i format my phone in sp flash tool will it help?[/QUOTE
Dont worry brother .restart ur computer then u try.. it worked for me.or shut down then switch on ur pc
---------- Post added at 09:45 AM ---------- Previous post was at 09:36 AM ----------
Restart ur computer then try.it worked for me..dont worry brother.i got success after tried this way.
Click to expand...
Click to collapse
SOLVED
funloft said:
i had the same problem bro! but what i did was to flash dat egypt firmware without the PRELOADER . and it worked.....
but the issue on ground now is that the phone is writing INVALID IMEI
but the phone will work with some network carriers!
i hope i've helped.......
Click to expand...
Click to collapse
KUDOS to you man... the post really helped me.. and for the IMEI, use MTK Droid Tool... Works like a charm
HawkEye said:
KUDOS to you man... the post really helped me.. and for the IMEI, use MTK Droid Tool... Works like a charm
Click to expand...
Click to collapse
you are welcome! you can just help me hit the thank button.
funloft said:
you are welcome! you can just help me hit the thank button.
Click to expand...
Click to collapse
Missed that??? sorry anyways, do you know how to unlock the bootloader of Huawei G700-U10??
HawkEye said:
Missed that??? sorry anyways, do you know how to unlock the bootloader of Huawei G700-U10??
Click to expand...
Click to collapse
nope! but i think i've come across a post online on that!
SOLVED
funloft said:
nope! but i think i've come across a post online on that!
Click to expand...
Click to collapse
I think i solved it!!! there is a portugal ROM update for that phone (it mostly is like downgrading the SW) which will automatically get the bootloader unlocked and then CWM can be flashed through mobile uncle!!!! Guess i will have to start a post on this as i see a lot of G700-U10 users around
A Heartful Thanks!!!!!
funloft said:
i had the same problem bro! but what i did was to flash dat egypt firmware without the PRELOADER . and it worked.....
but the issue on ground now is that the phone is writing INVALID IMEI
but the phone will work with some network carriers!
i hope i've helped.......
Click to expand...
Click to collapse
Your method helped me and I recovered my Huawei Ascend G700-U10 phone....irony is that my IMEI number is still present so thanks alot!!! :laugh:
funloft said:
i had the same problem bro! but what i did was to flash dat egypt firmware without the PRELOADER . and it worked.....
but the issue on ground now is that the phone is writing INVALID IMEI
but the phone will work with some network carriers!
i hope i've helped.......
Click to expand...
Click to collapse
hy bro i have same problem but this method is not working. i unchecked the preloader and pressed upgrade firmware but it says please check the necessary parts(i think).by pressing download it gives brom error.
You have saved my A** Brother. Just wow
funloft said:
i had the same problem bro! but what i did was to flash dat egypt firmware without the PRELOADER . and it worked.....
but the issue on ground now is that the phone is writing INVALID IMEI
but the phone will work with some network carriers!
i hope i've helped.......
Click to expand...
Click to collapse
Indeed you have helped. your solution just brought my cellphone back to life again from a sudden death syndrome. Manny many thanks and love.
funloft said:
i had the same problem bro! but what i did was to flash dat egypt firmware without the PRELOADER . and it worked.....
but the issue on ground now is that the phone is writing INVALID IMEI
but the phone will work with some network carriers!
i hope i've helped.......
Click to expand...
Click to collapse
thank you sooooo very much...it work..you really saved my butt in here buddy...thanks alot....godbless
Hello!
Yesterday I've flashed Hive UI rom for micromax canvas nitro a311. I was facing volume button problem plus priximity sensor problem so after that I've flashed this patch : http://forum.xda-developers.com/a31...-4-4-2-clean-nice-ui-buggless-t3046683/page12
Now volume button problem and proximity problem fixed but either of the sim card is not detected. Whenever I open up dialer and dial any no. , it says Please Turn Off Airplane Mode. Obviously airplane mode is turned off and I can access wifi and bluetooth.
In settings "Sim Management" isn't opening.
Please help me out how to fix this issue.
Edit : I forgot to mention that I accidentally flashed the TWRP recovery for different device from here : forum.xda-developers.com/showthread.php?t=2691886. Is it the real cause of my problem?
Yes the same thing happened me last week, i tried to install different version of twrp in my A311 and sim got deactivated and showed the message 'Sim card not detected'. I lost the IMEI and tried with mobileuncle tools and lot of other methods to recover the IMEI. But no method succeeded to get back the IMEI. After that I downloaded the stock ROM and flashed with YGPD tool. I didn't find any other method to recover the IMEI. You can also do the same thing, download the stock ROM from http://www.needrom.com/category/micromax/a311/ and flash it. Take a backup of apps + data with titanium backup and simply restore it after flashing.
Guys please help. Im having the same problem.
Nothing i've tried has worked. I dont know what to do with this phone now.
Please help guys
shreyash.kanaujia said:
Guys please help. Im having the same problem.
Nothing i've tried has worked. I dont know what to do with this phone now.
Please help guys
Click to expand...
Click to collapse
New update. I have successfully solved the no sim error and unknown baseband error.
If anyone wants me help, post reply.
Tell me...how u solve sim error ?
bro mujhe btao kaise kiya
shreyash.kanaujia said:
New update. I have successfully solved the no sim error and unknown baseband error.
If anyone wants me help, post reply.
Click to expand...
Click to collapse
my phone is also not showing sim card and not connecting to pc
shreyash.kanaujia said:
New update. I have successfully solved the no sim error and unknown baseband error.
If anyone wants me help, post reply.
Click to expand...
Click to collapse
plz tell me the solution plz plz
shreyash.kanaujia said:
New update. I have successfully solved the no sim error and unknown baseband error.
If anyone wants me help, post reply.
Click to expand...
Click to collapse
i'm facing the same problem, dude....
Can you provide solution??
Never mind.....
Here's the solution
http://romfree4u.com/nitro-baseband-imei-patch-for-mmx-a310a311/
Any way found to fix factory mode pls tell
Post #9
sim card not detected
Same problem for me I wrongly used other phone twrp . even I flashed stock from using ygpd tools and tried the base band patch also ... Nothing works ... My a310 detects the sim as airtel or idea but no signal there ...every thing works fine except signal... Base band patch didn't helped... Please help me .. My phone is useless now
---------- Post added at 07:52 AM ---------- Previous post was at 07:42 AM ----------
yesterday i tried a new rom for my a310 ... its my mistake i have used wrong philz touch recovery of other phone... imediately my simcard signals gone ... even i tried stock rom by ygdp tools .... the base band patch given above ....nothing helps.... sim cards gets detected as airtel or bsnl or vodafone but zero signal... tried a lot of roms... stockroms patchs... nothing helped... i cant use my phone please help...
---------- Post added at 07:57 AM ---------- Previous post was at 07:52 AM ----------
jpower73 said:
Never mind.....
yesterday i tried a new rom for my a310 ... its my mistake i have used wrong philz touch recovery of other phone... imediately my simcard signals gone ... even i tried stock rom by ygdp tools .... the base band patch given above ....nothing helps.... sim cards gets detected as airtel or bsnl or vodafone but zero signal... tried a lot of roms... stockroms patchs... nothing helped... i cant use my phone please help.
Click to expand...
Click to collapse
Use mtk Droid tools nd re write the imei's.
Tried mtk tools already no problem with imei phones shows imei number... It detects each and every sim card but showing no signal.... But if I use bsnl sim card it shows signal and I can make a call but no second sim working... And if put two bsnl sim cards none of them is working... Please help
How u solve the issue
unknown baseband error.
shreyash.kanaujia said:
New update. I have successfully solved the no sim error and unknown baseband error.
If anyone wants me help, post reply.
Click to expand...
Click to collapse
hi sir, i am getting this unknown baseband error. what should i actually do to solve this. need help urgent
tell me
shreyash.kanaujia said:
New update. I have successfully solved the no sim error and unknown baseband error.
tell me how to do it
i have the same problem
Click to expand...
Click to collapse
Hi,
My Micro max canvas nitro A311 is not on.
pls reply
Hello
When i try to flash my MTK 6735 with SP Flash Tool , i had this error messege : s_brom_cmd_startcmd_fail (0x7D5) ,
(Cannot pass bootrom start command! Possibly target power up to early.)
i THANK you in advance for your helps and attentions .
same problem
pajkov said:
Hello
When i try to flash my MTK 6735 with SP Flash Tool , i had this error messege : s_brom_cmd_startcmd_fail (0x7D5) ,
(Cannot pass bootrom start command! Possibly target power up to early.)
i THANK you in advance for your helps and attentions .
Click to expand...
Click to collapse
i tried to flash stock rom in my lenovo vibe k4 note multiple times ..... im getting error of power up too early as you mentioned above......did you find any solution? help plz
Leonidas3414 said:
i tried to flash stock rom in my lenovo vibe k4 note multiple times ..... im getting error of power up too early as you mentioned above......did you find any solution? help plz
Click to expand...
Click to collapse
I only used another SP Flash Tool and worked exactly as instructed
Leonidas3414 said:
i tried to flash stock rom in my lenovo vibe k4 note multiple times ..... im getting error of power up too early as you mentioned above......did you find any solution? help plz
Click to expand...
Click to collapse
I only used another SP Flash Tool and worked exactly as instructed.
pajkov said:
I only used another SP Flash Tool and worked exactly as instructed.
Click to expand...
Click to collapse
yeah.....i was using random flash tool but not the one compatible with my chipset version.....when i got this...i solved my problem
Leonidas3414 said:
yeah.....i was using random flash tool but not the one compatible with my chipset version.....when i got this...i solved my problem
Click to expand...
Click to collapse
Oh yeah, I'm happy to be successful!
hi
modemst partitions are totally write
protected so there's no way to write
qcn through diag mode or erase
partitions through EDL
I accidentally broke this tutorial qcn file
https://en.miui.com/thread-1901536-1-1.html
Did you solved the problem, can i get the qcn from you pls, i flashed wrong qcn , so my baseband version is unknown, i need poco F1 qcn pls
Heamnath said:
Did you solved the problem, can i get the qcn from you pls, i flashed wrong qcn , so my baseband version is unknown, i need poco F1 qcn pls
Click to expand...
Click to collapse
Find it on google. It isnt too hard to find. https://www.mediafire.com/file/yz6yvjlzomhbndg/Pocophone_F1_QCN.rar/file
tiennhu89 said:
Find it on google. It isnt too hard to find. https://www.mediafire.com/file/yz6yvjlzomhbndg/Pocophone_F1_QCN.rar/file
Click to expand...
Click to collapse
Did you solved the problem? Of yours , can you tell me the procedure
Heamnath said:
Did you solved the problem? Of yours , can you tell me the procedure
Click to expand...
Click to collapse
I dont have ur problem. Just search the answer for ur problem then i found it . Try it.