I have just recently started have a problem with my audio pausing/skipping when connected to my Sony mw600 headset. It never gave me any problems until recently and I have a different bluetooth adapter in my car that doesn't behave this way. I've tried switching Kernel versions (I couldn't remember if BT was kernel related, went from Lean Kernel v. 3.8 to 3.10), unpairing/repairing, and doing a hard reset on the headset itself. Are there any suggestions anyone else may have? Or know of anything that may be causing it? Thanks in advance.
Related
All of a sudden there is no sound coming out of one of the headphones on the headset. I was wondering if this has happened to anyone else and there is a way of fixing it.
You need to try another headset on the xda which will ascertain if it is the heaset, the socket or the motherboard.
I have tried with a 2.5 to 3.5 adapter and a sterreo headset and still have the same problem.
Does that mean the problem is with the socket or motherboard ?
and if so is there an easy way to fix ?
Could this be software related ?
I have the same problem. I updraded the ROM, which involved a hard reset, but that did not fix it. I thought it must be the headphones, so bought another set (same O2 ones) but the problem remains.
Curiously, the buttons on the handset still function.
Dont know what to try next, it sounds like a hardware problem.
I have a Seidio cradle(which has a built in audio out wired adapter) in my car and also have BT in the car. This setup was working great for music and nav audio through the stereo via hard wired aux audio(adapter built into cradle) and when a call came in the bluetooth would take over until end of call then would revert back to sound from aux audio out into car stereo. This initially broke in WM6 with some of the early roms but was fixed in 2.3.2 DCD kitchen. Now, with the new roms it is broken again both stock and 3.0.1 kitchen. The issue is that when I have my phone plugged into the Seidio cradle and thus have it plugged into an aux audio adapter for sound, if I try to make a BT call or answer one, the sound comes out of the audio out adapter instead of the bluetooth!!!! Same thing happens with a Seidio audio adapter that I have that goes from mini USB to standard mini stereo jack. This didn't happen with 2.3.2 but I would like to stay with 3.0.1 due to improved GPS lock speed. Man, this is driving me nuts. Seems like every time one thing starts working better another breaks!!! Thanks for any help in advance and thanks again DCD!!!! You are awesome!!!
BTW, I think this is a different issue than the semsons adapters are having. I am getting normal audio from the audio adapter for music the rest of the time. The primary issue is that bluetooth doesn't override the audio adapter when a call comes in. Anybody else seeing this with the Seidio audio adapters? Thanks.
I have this same issue when i want to use the phone through BT. Hopefully it is just a simple reg key entry.
JD
update on this. I just went back to DCD 2.3.2 and 3.27 radio. This issue resolved and for some reason my GPS lock speed is a lot faster than before. Not sure why. Also, data speeds for me are much better with the 3.27 radio. Close to double in most areas I am usually in. Obviously not endorsing for everyone but I am happy with this setup unless something else crops up.
Hi, yesterday I upgrade my phone to Gingerbread 2.3.4 XXKG3 and bluetooth in my car could connect but i can't hear anything from the speaker.
I've tried in my Audi where it used to work but nothing, same in Smart, Bmw and Porsche.
In all this car it can connect but audio from the speakers doesn't work.
Any solution?
Is a known issue?
Look in this thread I wrote...
http://forum.xda-developers.com/show...1#post17234761
Hopefully someone can help me here -- I haven't been able to find an answer to my problem even with several google and forum searches.
A few days ago, my AT&T version of the Samsung Galaxy S3 stopped working with wired headsets, but headphones still work. When I plug in a pair of headphones (2 stripes on the miniplug), I get balanced, stereo sound.
However, when I plug in a headset with mic (3 bands on the plug), I get no sound even though the phone acts like it is playing sound. I've tried different audio apps, headphones, and headsets, and the problem stays constant. Each headphone / headset also works on other audio sources.
I am AT&T's version of 4.1.1, kernel version 3.0.31-274808, and do not think any updates have been downloaded recently.
Any ideas what could be causing this issue? I used to have a headset plugged in for most of the day, and miss the remote and phone mic features a lot.
Thanks in advance for any help you can give.
TLDR: Wired headphones work on GSIII, but wired headsets give no sound. Help!
neel2004 said:
Hopefully someone can help me here -- I haven't been able to find an answer to my problem even with several google and forum searches.
A few days ago, my AT&T version of the Samsung Galaxy S3 stopped working with wired headsets, but headphones still work. When I plug in a pair of headphones (2 stripes on the miniplug), I get balanced, stereo sound.
However, when I plug in a headset with mic (3 bands on the plug), I get no sound even though the phone acts like it is playing sound. I've tried different audio apps, headphones, and headsets, and the problem stays constant. Each headphone / headset also works on other audio sources.
I am AT&T's version of 4.1.1, kernel version 3.0.31-274808, and do not think any updates have been downloaded recently.
Any ideas what could be causing this issue? I used to have a headset plugged in for most of the day, and miss the remote and phone mic features a lot.
Thanks in advance for any help you can give.
TLDR: Wired headphones work on GSIII, but wired headsets give no sound. Help!
Click to expand...
Click to collapse
Did you try using the headset with another phone?
Sent from my GT-I9300 using Tapatalk 4 Beta
Wrong forum
Hi there,
I am new to the forum and I'm posting because I'm experiencing a strange issue with my phone.
First of all, I have a Cubot P9, android version 4.2.2. My problem with the phone is related to the jack audio exit. The phone is able to recognise headphones without any problem, however, when trying to connect it with other audio devices, for instance: car radio, speakers, etc, through a male-male jack cable, there is no change in the phone and the sound/music keeps coming from the phone audio.
I've never had this issue connecting other devices, such as an iPod, to speakers so, I was wondering, does anyone have any idea about this issue? Anyone here with a similar problem in the same phone model or in a different one?
Thanks in advance.