Hi!
I recently installed the rom MyONEdx+RC3.0 (before I used vimiro v4.0.3). I installed it after wiping data, cache and dalvik-cache and when I rebooted I got black screen. Problem is that I am not able anymore to access recovery (TWRP). What can I do? I tried to wipe again partitions via fastboot but i get the following error: "FAILED (remote: not allowed)". Any help would be really appreciated. Thanks!
(P.s. I consider myself a just little more than a noob, so any explanation is very welcome )
maccio88 said:
Hi!
I recently installed the rom MyONEdx+RC3.0 (before I used vimiro v4.0.3). I installed it after wiping data, cache and dalvik-cache and when I rebooted I got black screen. Problem is that I am not able anymore to access recovery (TWRP). What can I do? I tried to wipe again partitions via fastboot but i get the following error: "FAILED (remote: not allowed)". Any help would be really appreciated. Thanks!
(P.s. I consider myself a just little more than a noob, so any explanation is very welcome )
Click to expand...
Click to collapse
Did you install boot.img after flashing rom ? Also which TWRP are you using ?
Will_Xda said:
Did you install boot.img after flashing rom ? Also which TWRP are you using ?
Click to expand...
Click to collapse
I installed nexus kernel v3 and i use twrp 2.5. I tried to install twrp 2.7 but nothing changed
phone working again
guys,
my desire x just resurrected from nothing, everything is working fine now, although I didn't do anything to solve the problem. I think the problem may be related to the battery, because I let it discharge completely and now it booted correctly...anyone of you experienced something like this before?
Anyway thanks for the help!
maccio88
maccio88 said:
guys,
my desire x just resurrected from nothing, everything is working fine now, although I didn't do anything to solve the problem. I think the problem may be related to the battery, because I let it discharge completely and now it booted correctly...anyone of you experienced something like this before?
Anyway thanks for the help!
maccio88
Click to expand...
Click to collapse
This has happened to me quite a few times, quite a few users have reported this aswell, just try not to let your battery go completely flat
Will_Xda said:
This has happened to me quite a few times, quite a few users have reported this aswell, just try not to let your battery go completely flat
Click to expand...
Click to collapse
thanks for the advice I was worried it had some hardware issue and since it's out of warranty now since I rooted it, it might not have been worth to repair it...
Related
Hi,
I'm in desperate need for any help. I'll describe my situation:
After the phone offered me an update from 2.3.3 to 2.3.5, it remained screwed. When I returned to the phone after I started the update, I could see a red triangle with an exlcamation mark. Gradually, I found out how to access the recovery menu and the HBOOT. I did some googling in hope to solve my problem by myself, so a guy on a Czech android forum uploaded some PG88DIAG file which the HBOOT started loading for a while but always ended with an error like 'no image or wrong image'.
So I figured my phone data have gone to hell and moved on to try rooting the device. Again, I followed a guide so as not to mess anything up, but it seems that the odds are against me. I installed the driver, unistalled HTC sync, ran the phone in the USB fastboot mode, launched the unrevoked application with admin rights, turned every possible feature of my AV off and I just kep looking at the bloody 'waiting for device' message. Tried it on another PC, too.
If it can be of any use, my HBOOT version is 98.0002.
Thanks in advance for any advice.
(Make sure the drivers are installed on your PC) Boot into fastboot then reflash your stock rom.
Well, as a newbie, I have no idea how to reflash ROM. Care to help?
Pride4u said:
Well, as a newbie, I have no idea how to reflash ROM. Care to help?
Click to expand...
Click to collapse
Download the RUU from here: http://www.filefactory.com/f/c64d333a2755a421/, then run it on your PC while your device is in fastboot.
Thanks, it worked! Now, could someone recommend me some ROM? I think it would be quite a pity not to root the phone now that've lost all data anyway.
Pride4u said:
Thanks, it worked! Now, could someone recommend me some ROM? I think it would be quite a pity not to root the phone now that've lost all data anyway.
Click to expand...
Click to collapse
You could try this: http://forum.xda-developers.com/showthread.php?t=1230029 or this: http://forum.xda-developers.com/showthread.php?t=1300224.
Thanks, though I got kinda snotty and tried this:
forum.xda-developers.com/showthread.php?t=1310845
Good choice?
Pride4u said:
Thanks, though I got kinda snotty and tried this:
forum.xda-developers.com/showthread.php?t=1310845
Good choice?
Click to expand...
Click to collapse
It's fine, but if you want more speed, you could try a new kernel like this one: http://forum.xda-developers.com/showthread.php?t=1100396.
Ok, but what do I do with the kernel? Just install a file from the recovery like ROMs?
Pride4u said:
Ok, but what do I do with the kernel? Just install a file from the recovery like ROMs?
Click to expand...
Click to collapse
Yes. Make sure you wipe the dalvik cache after you flash it.
Thanks. I have a tiny problem with the custom ROM, though. When I try to access the sound notification change (the one for messages), it says that Sound set has unexpectedely stopped (my translation) and it keeps crashing.
Is it a known bug in that ROM?
Pride4u said:
Thanks. I have a tiny problem with the custom ROM, though. When I try to access the sound notification change (the one for messages), it says that Sound set has unexpectedely stopped (my translation) and it keeps crashing.
Is it a known bug in that ROM?
Click to expand...
Click to collapse
Ask that question (or raise the issue) in the rom's thread.
I can't, it says I don't have enough posts to post in there.
Hi,
I won't give you the long story so here's what happened:
- TouchscreenDigitizer & LCD broke
- Replaced both
- Got a different rev of the Digitizer, result: X-Axis is inverted
- Someone (darksawa) built a patch for this by editing the touchscreen driver but you need nvflash enabled to replace the kernel image the easy way
- Was on JB Stock without root/unlock until now so I'm not able to enable nvflash
- There is a way to get it done anyway: Get the edited kernel image into another rom and install it via TWRP
- Tried to extract the stock rom (unpack blob files etc..) and replaced the kernel image - then pack all together again but wasn't working (flashing procedure abrupted, no brick)
Could someone of you do me and some other guys a big favour by replacing the original kernel image of the stock rom WW-10.4.2.15 with this kernel image?
Thank you!!!
mechadream said:
Hi,
I won't give you the long story so here's what happened:
- TouchscreenDigitizer & LCD broke
- Replaced both
- Got a different rev of the Digitizer, result: X-Axis is inverted
- Someone (darksawa) built a patch for this by editing the touchscreen driver but you need nvflash enabled to replace the kernel image the easy way
- Was on JB Stock without root/unlock until now so I'm not able to enable nvflash
- There is a way to get it done anyway: Get the edited kernel image into another rom and install it via TWRP
- Tried to extract the stock rom (unpack blob files etc..) and replaced the kernel image - then pack all together again but wasn't working (flashing procedure abrupted, no brick)
Could someone of you do me and some other guys a big favour by replacing the original kernel image of the stock rom WW-10.4.2.15 with this kernel image?
Thank you!!!
Click to expand...
Click to collapse
No I can't but I can go one better for you
I have converted it to a blob file and put it into an installable zip. Just flash this in twrp and your good to go.
This is for Jellybean.
flumpster said:
No I can't but I can go one better for you
I have converted it to a blob file and put it into an installable zip. Just flash this in twrp and your good to go.
This is for Jellybean.
Click to expand...
Click to collapse
Thank you very much for you help but I got the following problem:
I flashed the file via TWRP and now I'm stuck at the ASUS Boot-Logo with the tegra logo on the bottom right.
mechadream said:
Thank you very much for you help but I got the following problem:
I flashed the file via TWRP and now I'm stuck at the ASUS Boot-Logo with the tegra logo on the bottom right.
Click to expand...
Click to collapse
I tested the kernel myself before uploading it for you mate.. It worked fine. Everything was reversed for me when I booted back into the rom.
You could try doing a factory reset and a cache and dalvik wipe to see if that is your problem.
I was running hairybean 1.3 on jellybean when I tested it.
What rom are you running ?
flumpster said:
I tested the kernel myself before uploading it for you mate.. It worked fine. Everything was reversed for me when I booted back into the rom.
You could try doing a factory reset and a cache and dalvik wipe to see if that is your problem.
I was running hairybean 1.3 on jellybean when I tested it.
What rom are you running ?
Click to expand...
Click to collapse
I am on Stock. Installed Stock from Asus website, installed TWRP via fastboot and then flashed your file.
EDIT: factory reset, cache and dalvik wipe does not help, you suggest I install hairybean too?
mechadream said:
I am on Stock. Installed Stock from Asus website, installed TWRP via fastboot and then flashed your file.
EDIT: factory reset, cache and dalvik wipe does not help, you suggest I install hairybean too?
Click to expand...
Click to collapse
After you flashed my zip did you see a blue progress bar go along after you restarted the prime. If you did then the kernel definately flashed.
You can also try holding down the power button and volume down button until you get to the place where there are 4 icons and then going over to the wipe data icon and selecting that. That should factory reset your machine.
If that doesn't work let me know.
flumpster said:
After you flashed my zip did you see a blue progress bar go along after you restarted the prime. If you did then the kernel definately flashed.
You can also try holding down the power button and volume down button until you get to the place where there are 4 icons and then going over to the wipe data icon and selecting that. That should factory reset your machine.
If that doesn't work let me know.
Click to expand...
Click to collapse
Got that blue progress bar the first time after I flashed your file, then it went away and thats all.
Just did the wipe the way you told me, no change, still stuck @ splash screen. I think I have to install another complete rom to get over the splash screen again.
mechadream said:
Got that blue progress bar the first time after I flashed your file, then it went away and thats all.
Just did the wipe the way you told me, no change, still stuck @ splash screen. I think I have to install another complete rom to get over the splash screen again.
Click to expand...
Click to collapse
Well you're definitely not bricked so don't panic.
I think the next step would be to install a rom like you say. Try installing Hairybean 1.3 and follow all the steps in the original post. If you are still stuck after that I think the next step will be to run a full wipe script on your prime and then install a rom.
Try the rom first and let me know how you get on. We will get this sorted soon enough
Also before you install the rom, factory reset, wipe cache, dalvik and system then install.
flumpster said:
Well you're definitely not bricked so don't panic.
I think the next step would be to install a rom like you say. Try installing Hairybean 1.3 and follow all the steps in the original post. If you are still stuck after that I think the next step will be to run a full wipe script on your prime and then install a rom.
Try the rom first and let me know how you get on. We will get this sorted soon enough
Also before you install the rom, factory reset, wipe cache, dalvik and system then install.
Click to expand...
Click to collapse
Installed like you said and it's WORKING!!!
Thank you very much, after all these frustrating months it's working now, thank you thank you thank you!!
And thanks to sawa of course :good:
mechadream said:
Installed like you said and it's WORKING!!!
Thank you very much, after all these frustrating months it's working now, thank you thank you thank you!!
And thanks to sawa of course :good:
Click to expand...
Click to collapse
Glad you got it all fixed mate. I have no idea what went wrong for you as it worked first time for me but as long as it's all done now
flumpster said:
Glad you got it all fixed mate. I have no idea what went wrong for you as it worked first time for me but as long as it's all done now
Click to expand...
Click to collapse
Can I use this with Hairy Bean 1.4 too?
mechadream said:
Can I use this with Hairy Bean 1.4 too?
Click to expand...
Click to collapse
Yea, it should be okay on any stock based jellybean rom.
same problem
I have the same problem as the original treath.
I am not rooted, not unlocked under jelly bean.
Beginner question but is it also possible to install without root. how i understood TWRP needs root.
you can help me soo much ...
oremy said:
I have the same problem as the original treath.
I am not rooted, not unlocked under jelly bean.
Beginner question but is it also possible to install without root. how i understood TWRP needs root.
you can help me soo much ...
Click to expand...
Click to collapse
You need to be unlocked to install TWRP. Once installed you can flash the zip. Root is not required to install TWRP.
Thank you all!! i managed ... fully operational prime again ...
i was getting used to the mirrored clicking
Stuck at the ASUS Boot-Logo. FW US
My problem started two month ago when the repair assistance sent me back my tf201 with reverse axis. I broke the glass and they this but the didn't do the reversed axis. They wasted my time and money. I realy need help.
I am on Stock US-10.4.2.15 unlocked bootloader with TWRP and I have same problem that "!mechadream" had. I'm stuck at the ASUS Boot-Logo.
Maybe I shouldn't flash this WW(I don't know if this make some difference honestly) but I had some hope that finally solve my problem and fix it.
Now I am stuck. What should I do now? I can I do? Can you help me please? Thank you for your help.
fabianogalaxy said:
My problem started two month ago when the repair assistance sent me back my tf201 with reverse axis. I broke the glass and they this but the didn't do the reversed axis. They wasted my time and money. I realy need help.
I am on Stock US-10.4.2.15 unlocked bootloader with TWRP and I have same problem that "!mechadream" had. I'm stuck at the ASUS Boot-Logo.
Maybe I shouldn't flash this WW(I don't know if this make some difference honestly) but I had some hope that finally solve my problem and fix it.
Now I am stuck. What should I do now? I can I do? Can you help me please? Thank you for your help.
Click to expand...
Click to collapse
Can you tell me where you can get to please? can you get into TWRP? can you get to fastboot?
TWRP
flumpster said:
Can you tell me where you can get to please? can you get into TWRP? can you get to fastboot?
Click to expand...
Click to collapse
I am not sure about fastboot BUT the TWRP is working well. I can get into TWRP.
Thanks a lot.
fabianogalaxy said:
I am not sure about fastboot BUT the TWRP is working well. I can get into TWRP.
Thanks a lot.
Click to expand...
Click to collapse
Can you try installing hairybean 1.51 following all the instructions to install it including doing the wipes it tells you to.
TF201
flumpster said:
Can you try installing hairybean 1.51 following all the instructions to install it including doing the wipes it tells you to.
Click to expand...
Click to collapse
Thank you. I did what you asked me. THIS IS PERFECT!! Glad to have people like you in the world. Your help has saved my TF201. thank you :laugh::good:
Hey everyone and thanks for your help.
I deleted what seemed to me to be some worthless apps from my galaxy pocket neo using an app and now my phone is stuck on the boot screen. I have tried factory resetting my phone and after rebooting my phone will go through the original setup process, but ultimately after going through all the menus my phone becomes unresponsive. I am thinking that I need a new os.
I have seen the other help thread "stuck on boot logo" and I tried to understand the directions giving there, but have so far been unable to resolve anything. If I could get some clear instructions as to what might fix my phone I'd appreciate it.
nosrednaski said:
Hey everyone and thanks for your help.
I deleted what seemed to me to be some worthless apps from my galaxy pocket neo using an app and now my phone is stuck on the boot screen. I have tried factory resetting my phone and after rebooting my phone will go through the original setup process, but ultimately after going through all the menus my phone becomes unresponsive. I am thinking that I need a new os.
I have seen the other help thread "stuck on boot logo" and I tried to understand the directions giving there, but have so far been unable to resolve anything. If I could get some clear instructions as to what might fix my phone I'd appreciate it.
Click to expand...
Click to collapse
Go here
Flash Samsung stock ROM for your phone and baseband using Odin. It should be back to normal. It will be back to unrooted factory state.
Alternatively, if your cwm is still working, just flash a ROM zip after wiping data, cache, advamced->dalvik cache.
Do mounts and storage-> mount system->format system in CWM before flashing ROM if above 2 methods do not work (though I'm very sure one of them would work)
---------- Post added at 12:53 AM ---------- Previous post was at 12:50 AM ----------
Make sure that you flash the ROM of Samsung s5312 and not the one mentioned in the Odin guide. Search for it .
I can't seem to find a site that will let me download the stock rom. All of the rom sites bring me to uploaded.net and I dead end there... Is there something I am missing on that website?
Thanks!
problem app system
May be you remove any important system app so i think you should install stockrom by odin or install custom rom ) there are many nice rom such as: cm11 , cm10.1
Same Problem
nosrednaski said:
I can't seem to find a site that will let me download the stock rom. All of the rom sites bring me to uploaded.net and I dead end there... Is there something I am missing on that website?
Thanks!
Click to expand...
Click to collapse
Hi, have you found a solution to your issue? I am also stuck at the moment.
Never found a rom
bilicool said:
Hi, have you found a solution to your issue? I am also stuck at the moment.
Click to expand...
Click to collapse
I never did. I had to buy another phone.
nosrednaski said:
I never did. I had to buy another phone.
Click to expand...
Click to collapse
Ah i see. My apologies, I managed to fix it but it took a while. I had to download the official firmware from sammobile and flash it through odin. When i did that again i was stuck on the boot animation, but what i did was to go into my recovery and wipe cache, dalvik and also user data just to make certain and voila! phone works fine now.
I'm so sorry about your situation man, maybe you can try what i tried if you still got your phone. Its good as a spare!
Well done Sir!
I already spent a full work day on the sucker >.> I am just bitter and can't be bothered. Haha. Glad you were successful though!
I was trying to root my Lenovo P2a42 with TWRP and SuperSU V2.76 but then something went wrong and it wouldn't boot up. I then did an advanced wipe and wiped everything using TWRP and now I have no OS, although I can go into TWRP and the Bootloader. Whenether I try to boot up I get the Bootloader. Now I just want to get it back to normal, I have no backups (Cuz I'm dumb). Please help, thanks in advance.
Excabyte said:
I was trying to root my Lenovo P2a42 with TWRP and SuperSU V2.76 but then something went wrong and it wouldn't boot up. I then did an advanced wipe and wiped everything using TWRP and now I have no OS, although I can go into TWRP and the Bootloader. Whenether I try to boot up I get the Bootloader. Now I just want to get it back to normal, I have no backups (Cuz I'm dumb). Please help, thanks in advance.
Click to expand...
Click to collapse
Hey, did you fix this issue? Stuck at same point.
FIXED:
Flashed the stock rom that is floating around three times and it worked.
Flipperdolphin said:
Hey, did you fix this issue? Stuck at same point.
FIXED:
Flashed the stock rom that is floating around three times and it worked.
Click to expand...
Click to collapse
Yeah I fixed it a few weeks back. I did an advanced reset again then got a stock ROM zip transferred from my pc to my lenovo then flashed it with TWRP. Worked just fine although OTAs no longer work (Too happy to care).
Now, I still want to root my device... If you find a way that works could ya let me know? Thanks.
Excabyte said:
Yeah I fixed it a few weeks back. I did an advanced reset again then got a stock ROM zip transferred from my pc to my lenovo then flashed it with TWRP. Worked just fine although OTAs no longer work (Too happy to care).
Now, I still want to root my device... If you find a way that works could ya let me know? Thanks.
Click to expand...
Click to collapse
I still can't root the damn thing, I just don't understand, tried a few different ways and none of them work
I'm left clueless here. I just can't get it to boot, no matter what ROM/Kernel i'd flash. It was originally running OOS 2.3.1 but flashing it now won't work anymore. It worked briefly for 1 hour with that AOSP 8.1 but then after trying to flash gapps it stuck again in a bootloop. Sometimes it also freezes and reboots while i am flashing sometimes. I really have no idea what should i do next, hope you can help me.
You need to give more information on which TWRP you have.
Did you upgrade the bootloader at one point ?
OOS 2 is the old one.
You should have upgraded to MM bootloader and the use a TWRP compatible.
If not, you'll have to follow the Mega Unbrick Guide...
Kéno40 said:
You need to give more information on which TWRP you have.
Did you upgrade the bootloader at one point ?
OOS 2 is the old one.
You should have upgraded to MM bootloader and the use a TWRP compatible.
If not, you'll have to follow the Mega Unbrick Guide...
Click to expand...
Click to collapse
I updated the bootloader like over a year ago or so. I also tried 2 different versions of TWRP, now i am using the latest one.
ALSO, very sorry it actually is OOS 3.1.4, not 2.3.1, i just typed briefly what i could remember, i haven't been using this phone for months now but i would like to give it to a relative so there's that. Hope you can help me out, i have no clue why is it acting up like that.
Have you ever think that could be the emmc problem that need to get replaced?
Our phone is old enough...
(just my thoughts btw)
Try to flash official ROM after having wiped everything
Kéno40 said:
Try to flash official ROM after having wiped everything
Click to expand...
Click to collapse
That's what i first tried, mentioned it in the main post.
yayakuya said:
Have you ever think that could be the emmc problem that need to get replaced?
Our phone is old enough...
(just my thoughts btw)
Click to expand...
Click to collapse
I don't know what to make of this, thought maybe anyone else encountered this problem and has a clue.
gabytzu338 said:
That's what i first tried, mentioned it in the main post.
Click to expand...
Click to collapse
You didn't mentionned you wiped everything : System, data, cache, Internal...
Then usb mount to pussh OOS 3 and flash
Kéno40 said:
You didn't mentionned you wiped everything : System, data, cache, Internal...
Then usb mount to pussh OOS 3 and flash
Click to expand...
Click to collapse
I don't really understand what you are trying to say. I did wipe everything and the only way to flash anything is through adb sideload anyway since the device is not recognized as storage while in TWRP. I think I am gonna give up on it, I was gonna sell it but I can't risk having it act up days/weeks after i sold it.