So after experiencing first hand the poor figment of any tempered glass screen protectors I have deiced to create this OP. I have purchased 3 types of plastic screen protectors from amazon to see which if any will be a suitable replacement. I figured if I buy some and they are terrible I can always return them.
1. Mr Shield clear:
http://www.amazon.com/gp/aw/d/B00OD...416363968&sr=8-1-spell&pi=AC_SX110_SY165_QL70
I had high hopes for these after buying them for my Nexus 9 and having s good experience. The ones for the Nexus 6 are a far different story. The fitting is so poor they cant cover my display. I believe that these were cut very poorly because you can't align them properly to fit even with their tiny size. They have a nice feel and are easy to swipe back and forth on while using the office but if they can't protect my screen then there's no point in having it. (Pictures coming soon)
2. iSmooth:
http://www.amazon.com/gp/aw/d/B00O3OSBHI/ref=mp_s_a_1_1?qid=1416364063&sr=8-1&pi=AC_SY200_QL40
3. icarez: (coming Wednesday)
These looks just the the Mr Shield screen protectors above, except they are packaged better and come with better instructions. The downside is that they are again cut very small. I have learned that this is due to the curved nature that the ends of the display have, but its rather unfortunate that we are left with a screen that can't be fully protected. These also have a better feeling that the Mr. Shield protectors.
4. Spigen Crystal:
http://www.amazon.com/Protector-Spi...533171&sr=8-1&keywords=spigen+crystal+nexus+6
These are the best plastic screen protectors by a long shot. The fit and finish is far superior to any of the other brands that I have tried thus far. They are very thin compared to the other 3 I tried above. The costing allowing your fingers to slide across it with ease for people who prefer the gesture typing. The screen protector does cover the camera, and proximity sensor. Don't let this discourage you because they both work fine on my phone. The fit is much closer to the curves without causing issues. There is a fix for people with proximity sensor issues in the tempered glass OP. I would recommend these to anyone who wants a nice quality screen protector.
Update: from what I have seen, the Spigen is still your best bet. I have a couple as backups and I couldn't be happier. TG has been and still is very hit and miss but you can't go wrong with the Spigen Crystal screen protectors. I have no issues with my proximity sensor for FFC and its the only screen protector I've used since discovering it.
feel free to add your own choices and a brief description about the quality and whether or not you would recommend it.
I got the iSmooth protectors. A little difficult to install, but quite good once they're on. They feel almost like glass, they have a coating on them to prevent fingerprints too.
ryude said:
I got the iSmooth protectors. A little difficult to install, but quite good once they're on. They feel almost like glass, they have a coating on them to prevent fingerprints too.
Click to expand...
Click to collapse
This Review differs, http://www.amazon.com/Google-Nexus-...tBy=bySubmissionDateDescending#R1XWOBSF3898N4
What is your opinion?
Cheetohz said:
This Review differs, http://www.amazon.com/Google-Nexus-...tBy=bySubmissionDateDescending#R1XWOBSF3898N4
What is your opinion?
Click to expand...
Click to collapse
Pretty sure the cutout isn't for the camera, but the ambient sensor.
i ordered the invisible defenders. should be here tomorrow just ahead of the phone. never used them before as i've always gone with spigen, but since they're not shipping until next week i went with these. from a spec perspective, they sound every bit as good as the spigen crystals. i'll find out tomorrow/friday
http://www.amazon.com/gp/product/B00NU7DMC8/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
indianajonze said:
i ordered the invisible defenders. should be here tomorrow just ahead of the phone. never used them before as i've always gone with spigen, but since they're not shipping until next week i went with these. from a spec perspective, they sound every bit as good as the spigen crystals. i'll find out tomorrow/friday
http://www.amazon.com/gp/product/B00NU7DMC8/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Let us know how they are. The Spigen ones are good from past experience ( I won't buy their TG again) I hope they are offered with prime to make shipping faster.
I was planning on getting a glass protector, but after reading several posts here I see that is a bad idea.
I normally bought Zagg with my S4, but I'm not really sure what kind I want to get with my new Nexus 6. I absolutely HATE finger prints so anything that gets them easy is a no go for me.
for anyone that bought from SuperShieldz on amazon they just sent me this:
Dear Customer
We would like to inform you that the nexus 6 screen protector we sent to you is incorrect for the camera lens. The proper one will be send to you on Next Monday. Sorry and we apologize for any inconvenience.
Best Regards,
Ann
I would stay away from the iSmooth screen protectors. Received mine today and they are not properly aligned for the front camera as the protector covers it. Only reason I'm not returning is because I need something on the phone until the other screen protectors I ordered arrive.
My Xtreme Guards had the wrong camera cutout also. If all these companies have the wrong cutout, were they given the incorrect dimensions from Motorola when they all started cutting these out?
PaisanNYC said:
My Xtreme Guards had the wrong camera cutout also. If all these companies have the wrong cutout, were they given the incorrect dimensions from Motorola when they all started cutting these out?
Click to expand...
Click to collapse
According to iSmooth, yes that's exactly what happened.
Thank you for purchasing our Nexus 6 screen protectors and writing a review on your experience with them. I sincerely apologize for the inconvenience you have experienced thus far with our product. Since we are extremely fanatical about our customers, I wanted to reply back to you so I could explain the errors behind the engineering of the Google Nexus 6 screen protectors.
I will point out that in order for us to get to market by the Nexus 6's launch date sometimes we have to make an educated guess with our screen protectors. This time, we failed with our cutout design.
Below are the key points that will point out where our screen protectors were either botched or made to fit this new device and the reasoning behind it:
1.) The cutout for the camera is a full camera width to the left of the actual camera -- this is obviously a mistake. However, the clarity of the screen protector will still insure that the camera is NOT affected by the screen protector. It is just customary that the cutouts exist. However, there will still be a little notch for no reason on your screen protector. We sincerely apologize for this error.
2.) The screen protector will NOT go "edge-to-edge" but that was done on purpose as there is a curved edge on the Nexus 6.
3.) If it did go "edge-to-edge", then the screen protector will lift up on the edges as it would not properly adhere to the curved edges.
4.) We decided that 95% coverage on the phone was better than having faulty screen protectors.
5.) Our screen protectors were also meant to work with cases which means if we DID cover the edges of the screen, then the case would force the screen protector to lift and cause a lot of bubbling and ruin the screen protector.
Please know that getting a revised cut of our Nexus 6 screen protectors is top priority at iSmooth - our customers are our #1.
If you would like to receive these updated screen protector cuts when we receive them, please email [email protected] with your name, mailing address and Order Number. When we receive them we will promptly email you and mail those corrected screen protector replacements out post haste with absolutely NO charge to you.
Or, should you need anything else or have any other concerns at all, kindly contact me at that same email address - I sincerely want to help and make this situation right by you.
Have a nice Wednesday and I hope to talk to you soon,
Channele
Customer Support Manager
Click to expand...
Click to collapse
I'm updating the OP it appears like there will be no good screen protectors that are edge to edge with the exception of wet install ones which are a nightmare. I wouldn't risk a wet install with FF speakers but that's just me. I may just get a dbrand front skin to cover the gaps.
Pilz said:
I'm updating the OP it appears like there will be no good screen protectors that are edge to edge with the exception of wet install ones which are a nightmare. I wouldn't risk a wet install with FF speakers but that's just me. I may just get a dbrand front skin to cover the gaps.
Click to expand...
Click to collapse
I never even thought about that. I liked the Zagg ones but on my S4 there isn't front facing speakers.
Zenzr said:
I never even thought about that. I liked the Zagg ones but on my S4 there isn't front facing speakers.
Click to expand...
Click to collapse
Thats what I am worried about the most. The speakers are rather large and I've had bad experiences with wet install screen protectors. They killed my LG G Pad 8.3 (even when I barely put any solution on it, some managed to get into a small gap). Anyway I guess I'll see what else is available.
i just need any of the three screen protectors i ordered to show up. This POS one they put on the phone out of the box is killing me. I swear, would it kill moto (or any other manufacturer) to at least put a half way decent one on the device out of the box?
mb3030 said:
i just need any of the three screen protectors i ordered to show up. This POS one they put on the phone out of the box is killing me. I swear, would it kill moto (or any other manufacturer) to at least put a half way decent one on the device out of the box?
Click to expand...
Click to collapse
I'm pretty sure it's not an actual screen protector, just something to cover it until it gets to your door.
Zenzr said:
I'm pretty sure it's not an actual screen protector, just something to cover it until it gets to your door.
Click to expand...
Click to collapse
whatever- you know what i mean. This would add like a penny cost to a big manu
Pilz said:
Thats what I am worried about the most. The speakers are rather large and I've had bad experiences with wet install screen protectors. They killed my LG G Pad 8.3 (even when I barely put any solution on it, some managed to get into a small gap). Anyway I guess I'll see what else is available.
Click to expand...
Click to collapse
Well, I guess I won't be installing the wet ones I just got when I get my device.
mb3030 said:
i just need any of the three screen protectors i ordered to show up. This POS one they put on the phone out of the box is killing me. I swear, would it kill moto (or any other manufacturer) to at least put a half way decent one on the device out of the box?
Click to expand...
Click to collapse
heh that pos oem one the phone comes with lasted me a good month on the nexus 5. worked great!
anyway, my invisible defenders are out for delivery today. of course my phone isnt being delivered until tomorrow...
I ordered Spigen's for the N6. I Love it! can't even tell that i had one on my N5. As smooth as the screen.
---------- Post added at 10:17 AM ---------- Previous post was at 10:16 AM ----------
Pilz said:
I'm updating the OP it appears like there will be no good screen protectors that are edge to edge with the exception of wet install ones which are a nightmare. I wouldn't risk a wet install with FF speakers but that's just me. I may just get a dbrand front skin to cover the gaps.
Click to expand...
Click to collapse
I prefer wet install. I get the best install. Plus isn't this phone "splash" proof? (or was that a miscommunication?)
Related
Hey everyone,
looking for a great screen protector that helps with the glare issue and viewing angles. I'm not expecting wonders but anything to help. Hate the fact I see reflection on screen sometimes. Any info would be great. Thanks
Gemni69 said:
Hey everyone,
looking for a great screen protector that helps with the glare issue and viewing angles. I'm not expecting wonders but anything to help. Hate the fact I see reflection on screen sometimes. Any info would be great. Thanks
Click to expand...
Click to collapse
How about checking the Skinomi thread in this very first page of this section ?
I just orderded some screen protectors from ebay hong kong. 11.99 for 3. ill let you know how they work.
Good Screen Protector
Ordered one from Amazon made by Aurum(do a search). It came quickly and I am very happy with it, wished I waited a few days, they have a deal going on with it.
It says its made from Japanese PET, in my experience it is better than those "military" strength ones like Zagg etc(bad evo 4g experience). This one has a dry application and protected on both top and bottom by covers (a protector for the protector). Ships from the US.
I have the Skinomi. I'm happy with it, but it does not appear to help with glare or screen angles (though, honestly, I only used it for a few minutes before installing the protector).
dj_justice said:
I just orderded some screen protectors from ebay hong kong. 11.99 for 3. ill let you know how they work.
Click to expand...
Click to collapse
which ones did you get?
-J
Go with the Skinomi one. It's cheap (relatively if you consider lifetime free replacement) and if you don't botch the installation it looks fantastic. And... you don't have to wait three weeks for something to come from China.
Don't get me wrong, I buy stuff from China sometimes but only when I can't get it here or if it's a lot more money to get it from here.
Anyone have recommendations for screen protectors? Looking for helping with anti glare and no finger prints on it. Any info would be great. Thank for all the feedback so far.
Traderny said:
Ordered one from Amazon made by Aurum(do a search). It came quickly and I am very happy with it, wished I waited a few days, they have a deal going on with it.
It says its made from Japanese PET, in my experience it is better than those "military" strength ones like Zagg etc(bad evo 4g experience). This one has a dry application and protected on both top and bottom by covers (a protector for the protector). Ships from the US.
Click to expand...
Click to collapse
I just ordered one of the Aurums too. I have a "matte" type screen protector on my iphone and I really like it so I hope the aurum one is similar. I will update once it arrives.
emersonlp said:
I just ordered one of the Aurums too. I have a "matte" type screen protector on my iphone and I really like it so I hope the aurum one is similar. I will update once it arrives.
Click to expand...
Click to collapse
Do you mean this one ? according to the user image its not custom made (no holes for the camer/sensors) not sure if it would even cover the bezel + the screen.
sjmoreno said:
Go with the Skinomi one. It's cheap (relatively if you consider lifetime free replacement) and if you don't botch the installation it looks fantastic. And... you don't have to wait three weeks for something to come from China.
Don't get me wrong, I buy stuff from China sometimes but only when I can't get it here or if it's a lot more money to get it from here.
Click to expand...
Click to collapse
The Skinomi one requires a WET application, that then has to dry, do you really want to spray some liquid on your new g-tab? I tried this on my Evo installation was a pain but then my fingers got stuck scrolling, so I learned my lesson and stick to the PET material which has a silicone coating for smooth movement
Aurum Screen Protector
You are right, I have the Aurum one from Amazon on my G-tablet, and there are no holes, but I do not see a difference in camera performance. The protector covers bezel to bezel. I've used the camera with and without the protector, all I know is that it is as grainy before as it was after the Aurum screen protector. I do not use the camera(I really do not need anyone getting scared looking at me) so it's fine by me, it the smoothness of movement that matters.
just my $0.02, but why not use the one by Zagg....?..
http://www.zagg.com/invisibleshield...es-screen-protectors-covers-skins-shields.php
Traderny said:
You are right, I have the Aurum one from Amazon on my G-tablet, and there are no holes, but I do not see a difference in camera performance. The protector covers bezel to bezel. I've used the camera with and without the protector, all I know is that it is as grainy before as it was after the Aurum screen protector. I do not use the camera(I really do not need anyone getting scared looking at me) so it's fine by me, it the smoothness of movement that matters.
Click to expand...
Click to collapse
Thanks for the info, Traderny. Would you say that the Aurum screen protector allows for smoother gliding movements than the unprotected GTab screen? I'm hoping to find something that provides a nice swipe feel. Too often my fingers would "stick" to the naked screen or (less so, but still) the Skinomi protector.
My .2 cents
Traderny said:
The Skinomi one requires a WET application, that then has to dry, do you really want to spray some liquid on your new g-tab? I tried this on my Evo installation was a pain but then my fingers got stuck scrolling, so I learned my lesson and stick to the PET material which has a silicone coating for smooth movement
Click to expand...
Click to collapse
Wet application screen protectors have been around for a while and it has been shown to not be an issue if you follow the directions on installation. There are thousands of people that have used wet installation screen protectors here in the gTab forums that have reported no residual issues with the gTab during/after application.
Also, you don't spray liquid on the gTab, rather you're supposed to spray the liquid on both sides of the screen protector before application and dab up the excess liquid as you work it to the edges with the provided plastic card.
I've used both PET and this style of screen protectors on devices before and I prefer this over the PET as I have found the PET style protectors to be too shiny for my tastes.
Among the most helpful reviews for the PET protector on Amazon there are these comments:
1.) Good product, but a pain to put on. Just the slightest piece of dust will cause an air bubble.
2.) According to the packaging, this item is "Finger print free" and "Bubble free application". I experienced both. I would NEVER purchase this product again or recommend it.
Just goes to show you that people will find something to complain about no matter what the product is.
Protectors Protect
My experience with screen protectors on cell phones is that they are only good to protect the screen from damage. All of them will show fingerprints, smudges, grease and oil. This is esp. true with a touch screen. it's like wearing glasses you got to clean them alot. So save time money and headache by putting a microfiber cloth in the bag with your Gtab.
I went with the Exim anti-glare screen protectors, but did have to wait for shipping from China. I bought a complete skinomi skin set, and promptly botched the wet application of the screen protector, but since I wanted the anti-glare it just meant a week wait for the Chinese Air Mail which I had already ordered.
Overall I like the Exim, it was easy to install without any bubbles, though you might want to trim the corners a bit as its a very tight fit. I ended up cutting them off after applying it because I had the screen on perfectly without a single dust mote making a raised area. I don't mind a poorly cut corner, but do wish I had just done a quick trimming beforehand as I wasn't perfectly centered.
2 for $12.99... Was worth the wait.
Hey Naieve,
does it really help with the anti glare issue? Also does it have any issues with the touch screen interface? Is the screen protector to thick that it doesnt detect your finger movement on the screen? Any help on the finger print issues haha?
It helps some with the glare, definitely diffuses the light, but it looks more like a compromise in between a clear protector and some of the very heavy anti-glare screen protectors I've seen. I like it because of this actually. As to issues with the touch screen, I spent some time googling before buying, and while I forget where I read it the fact is there is no difference while using this protector. Even a light touch still works just fine. I wonder if that is the reason this AG protector diffuses less light, as I have heard of some AG protectors being too thick and screwing up touch. It does still show fingeprints, but its not that bad and is easy to clean. Definitely less noticeable than just the screen itself.
aasoror said:
Do you mean this one ? according to the user image its not custom made (no holes for the camer/sensors) not sure if it would even cover the bezel + the screen.
Click to expand...
Click to collapse
I said I would update once my Aurum arrived. Like others have mentioned, there is no cutout for the camera or sensor - I don't know what effect that has nor do I really care. I never use the camera anyway.
The protector itself fits perfectly on the screen - it is so perfect that I had trouble aligning it properly and i would get halfway done installing it and notice it was running off the side of the screen slightly.
It took a few minutes to install because I did want it to be perfect. Now that it is installed I am really happy with it. My fingers slide better across the screen and there are far less fingerprints. I am happy with my purchase.
Hi Guys,
Since there is no good tempered glass or screen protector available for the S7(not edge), Spigen has one but that's way too expensive and I wasn't able to find an authentic one in the market. Has anyone tried protectors and skins by GadgetShieldz? Here's the link-
http://www.gadgetshieldz.com/samsung-galaxy-s7-screen-protectors-covers-cases.html
The plus is that if the product is as good as they are describing then it covers the sides too. The con is that there is no actual proof or hands on video regarding the same+it is still expensive atleast for me but there's no other alternative.
Thanks
I just ordered the matte and the ultra clear screen protectors. I didn't buy the body because I have a Rhinoshield bumper and back protector. I'll post a review once they arrive.
Good product the body shield is
Have been using the Gadgetshielz full body protector for 6 months now. It is quite good and the cuts are precise. Quite a lot of work, applying them is. Be patient after applying, in a week or so, the bubbles and wobbles will sort themselves out. Was hard to believe when I completed installation and saw what a mess it was.
That doesn't look like tempered glass. I will NEVER go back to the flimsy protectors. Too many issues with bubbles, etc. But, I have yet to find a tempered glass that full covers the edges. It's more of an issue when things are right at the edges (such as text) that makes it difficult to read, but I'll take that as it's rare knowing that I have a tempered glass protector on that does a better job of absorbing the shock of a drop.
Using their screen protector, with my rhinoshield bumper case and no bubble. Wanted glass first but all those that I bought, the case lifted them or they had the big halo, lifting all around cause the curve screen.
http://s30.postimg.org/6k9nxdkm9/1.jpg
http://s30.postimg.org/u2bgpk80x/4.jpg
They are working way far better than the TGP.
billubakra said:
Hi Guys,
Since there is no good tempered glass or screen protector available for the S7(not edge), Spigen has one but that's way too expensive and I wasn't able to find an authentic one in the market. Has anyone tried protectors and skins by GadgetShieldz? Here's the link-
http://www.gadgetshieldz.com/samsung-galaxy-s7-screen-protectors-covers-cases.html
The plus is that if the product is as good as they are describing then it covers the sides too. The con is that there is no actual proof or hands on video regarding the same+it is still expensive atleast for me but there's no other alternative.
Thanks
Click to expand...
Click to collapse
Thanks mate. I bought two and will report when it arrives
So, here's why review-
Finally ordered them. It was my first time that I was installing any sort of protector and I was super nervous. The protector kept coming off. I had to wet it with the solutions many times. I drove out the bubbles as many as I could but the end result was way too foggy and messy. But after 48 hours everything was gone, except few dust and fingerprints particles which are my fault BTW there's a huge particle of dust on the back button. Can I lift it up just a tad to remove it? I still have the solution, I am planning to wet it to reapply. Will it work?
Also can anyone suggest a good cover for S7? My current one is a chinese one, but I think it will remove the side protectors if I take the phone out few times because with the side protectors the sides bulge out a bit. @r3xx3r @ere1nion
Any way to get the same cover in India?
iBolski said:
That doesn't look like tempered glass. I will NEVER go back to the flimsy protectors. Too many issues with bubbles, etc. But, I have yet to find a tempered glass that full covers the edges. It's more of an issue when things are right at the edges (such as text) that makes it difficult to read, but I'll take that as it's rare knowing that I have a tempered glass protector on that does a better job of absorbing the shock of a drop.
Click to expand...
Click to collapse
I searched for a month, ordered like 10 different tempered glasses from various websites but they all sucked. GS's protector is not a glass but it is the best alternative to a glass.
An out of context question, what are these four stripes/white lines located on the top and bottom side of the phone for? Just along the charger and speaker in the photos below-
http://www.theinquirer.net/w-images...xys7edgereviewusbport-540x334.jpeg?1458143499
https://fscl01.fonpit.de/userfiles/.../AndroidPIT-Samsung-galaxy-s7-edge-2-w782.jpg
billubakra said:
An out of context question, what are these four stripes/white lines located on the top and bottom side of the phone for? Just along the charger and speaker in the photos below-
http://www.theinquirer.net/w-images...xys7edgereviewusbport-540x334.jpeg?1458143499
https://fscl01.fonpit.de/userfiles/.../AndroidPIT-Samsung-galaxy-s7-edge-2-w782.jpg
Click to expand...
Click to collapse
Those plastic lines are antenna separators. The frame of the phone is used for different antennas, so they must be separated.
MrDusan said:
Those plastic lines are antenna separators. The frame of the phone is used for different antennas, so they must be separated.
Click to expand...
Click to collapse
Thanks Brother. When I saw them for the first time I thought they are there for the light notification purposes.
billubakra said:
Thanks Brother. When I saw them for the first time I thought they are there for the light notification purposes.
Click to expand...
Click to collapse
You're welcome! That would actually be cool
Are U still using those GadgetShieldz? I want to buy them.
MrDusan said:
You're welcome! That would actually be cool
Are U still using those GadgetShieldz? I want to buy them.
Click to expand...
Click to collapse
Yes, since there's no curved/rounded tempered glass available so still using them. Go for them Brother.
Look into rhinosheild. Absolutely unbeliveable. I'll be ordering mine this week.
With that screen protector, ip68, and my otterbox defender; I will never worry about this phone breaking on me.
James.Markham0757 said:
Look into rhinosheild. Absolutely unbeliveable. I'll be ordering mine this week.
With that screen protector, ip68, and my otterbox defender; I will never worry about this phone breaking on me.
Click to expand...
Click to collapse
Not full coverage as per the reviews-
https://rhinoshield.io/products/galaxy-s7-screen-protector?variant=12329024001
An update, I used my phone with the Samsung Gear VR yesterday and when I removed it the protector from the upper side of the phone, where the front camera is got removed I tried to paste the same but it is full of bubbles now . Is anyone else using GS's protector with VR?
billubakra said:
Not full coverage as per the reviews-
https://rhinoshield.io/products/galaxy-s7-screen-protector?variant=12329024001
Click to expand...
Click to collapse
Correct it is not. I use the Otterbox Commuter and Otterbox Defender so this is not an issue for me particularly. I had a partial screen protector on already so no shift in change for me there either. I just received mine in the mail today. The back application was by far harder than the front. I didn't get it perfect. It's the material used on the back. I will not be testing this screen protector but I feel confident with it on. Hopefully it will never need to prove itself.
So, my protector is screwed thanks to Gear VR, it kept on removing the upper part of the protector every time I put the phone in the Gear VR or took it out. Has anyone tried the so called buff guard(a type of tempered glass) which covers the whole screen even the edges? Is there any alternative for the GadgetShieldz protector?
My wife just upgraded to an S7 (tried the Moto Z and it was too big, bulky and heavy for her). She wanted a tempered glass screen protector, but not like the one I have (which doesn't cover the entire screen due to the curved edges of the S7).
After much research, I found the amFilm glass protector was one that was listed in many top-10 lists as being excellent. This covers the entire glass but gives room on the edges for cases. My wife has a Speck Candyshell case for her phone and the screen protector works fine with it. My only issue with it is that on the top and bottom (which is fully protected), it's colored. So you have to choose the correct color based on your phone (black or gold). I don't understand why it has to be colored. Why not make it all clear so you can see the actual color of the phone? But it DOES cover the entire screen unlike the earlier brands that came out. And it was very easy to apply and there are no bubbles at all. Touch response is excellent from what I could tell. I tested it and couldn't find any "soft" or "blind" spots that didn't react and I just lightly touched, so it was pretty good. I'll wait and see how it goes with my wife after she's had it for awhile. It also comes with a lifetime warranty for the purchased product. That means, and they state this in the documentation that comes with the protector, that the warranty does NOT apply to a warranty replacement item. So that means, if you've swapped out your initial purchase with a warranty item, you'll have to purchase a brand new screen protector to get a lifetime warranty again. That is pretty standard across most things like this, so I have no complaints.
Here is the gold colored one that I ordered and installed since she has a gold S7:
https://www.amazon.com/gp/product/B01CUKZ296/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
iBolski said:
My wife just upgraded to an S7 (tried the Moto Z and it was too big, bulky and heavy for her). She wanted a tempered glass screen protector, but not like the one I have (which doesn't cover the entire screen due to the curved edges of the S7).
After much research, I found the amFilm glass protector was one that was listed in many top-10 lists as being excellent. This covers the entire glass but gives room on the edges for cases. My wife has a Speck Candyshell case for her phone and the screen protector works fine with it. My only issue with it is that on the top and bottom (which is fully protected), it's colored. So you can to choose the correct color based on your phone (black or gold). I don't understand why it has to be colored. Why not make it all clear so you can see the actual color of the phone? But it DOES cover the entire screen unlike the earlier brands that came out. And it was very easy to apply and there are no bubbles at all. Touch response is excellent from what I could tell. I tested it and couldn't find any "soft" or "blind" spots that didn't react and I just lightly touched, so it was pretty good. I'll wait and see how it goes with my wife after she's had it for awhile. It also comes with a lifetime warranty for the purchased product. That means, and they state this in the documentation that comes with the protector, that the warranty does NOT apply to a warranty replacement item. So that means, if you've swapped out your initial purchase with a warranty item, you'll have to purchase a brand new screen protector to get a lifetime warranty again. That is pretty standard across most things like this, so I have no complaints.
Here is the gold colored one that I ordered and installed since she has a gold S7:
https://www.amazon.com/gp/product/B01CUKZ296/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Thanks for such a detailed review. There are many protector glasses of that sort available in India, all of them are manufactured in china, but not the brand which you have mentioned. The reviews of the chinese one's is pathetic. So, I didn't go for them. Can you please check and confirm whether the phone fits fine in Gear Vr with the protector that you have installed or not?
This one, though its for the Edge model, looks tempting but I will wait for an early bird's review before ordering the one for the non-Edge version which should be available by tomorrow-
http://www.amazon.in/CEDO-Samsung-G...ems&ie=UTF8&qid=1489471980&sr=1-4&keywords=s7
What 3d glass screen have everyone ordered? Please share on this thread, my screens should be coming soon!!
I'm not a fan of glass screen protectors on a curved screen. There is always to much glare.
Sent from my SM-G925P using XDA-Developers Legacy app
I haven't bought one yet, but I'll be getting most of my info from this YouTube channel. This guy does quality reviews.
For example, see this video about the Olixar glass screen protector:
https://youtu.be/o2R1YEX4yrw
He's already stated that he'll be reviewing several glass screen protectors for the S8+, and I think most of the information should apply to the S8 as well.
i bought the olixar one only, says case compatible. Lets see when it comes if it fits with the spigen thin armor.
https://in.mobilefun.com/63316-olix...e-compatible-glass-screen-protector-black.htm
Just posted this on the Plus forum - thought I'd share here too. Looks like it might be good. https://www.youtube.com/watch?v=QvdxxTUu1ac
Where is the plus forum? Lol
Th3PorTuGa said:
Where is the plus forum? Lol
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-s8+
Thanks
Dr. Fed said:
I haven't bought one yet, but I'll be getting most of my info from this YouTube channel. This guy does quality reviews.
For example, see this video about the Olixar glass screen protector:
https://youtu.be/o2R1YEX4yrw
He's already stated that he'll be reviewing several glass screen protectors for the S8+, and I think most of the information should apply to the S8 as well.
Click to expand...
Click to collapse
Sucks that the Amazon link he posted, the item's unavailable. Hopefully it'll come back in stock. Curious about other glass protectors and if they're case-friendly. This one does look promising though.
waynerbbx said:
Just posted this on the Plus forum - thought I'd share here too. Looks like it might be good. https://www.youtube.com/watch?v=QvdxxTUu1ac
Click to expand...
Click to collapse
Another one to look at as well. I actually am currently using one of their glass screen protectors for my S6. Haven't had any issues with it, so also good to know.
Anyone try the Zagg yet? It supposed to have full screen adhesive, hoping to see some user reports though since its $50.
Don't do it!
nagle3092 said:
Anyone try the Zagg yet? It supposed to have full screen adhesive, hoping to see some user reports though since its $50.
Click to expand...
Click to collapse
I went out to Best Buy yesterday to get the Invisible Shield Glass Curve by Zagg and was not impressed. I'm going to try and return it in a couple hours..
The touch response is horrendous. I almost want to call Zagg directly and suggest they pull all these products from stores because I'm sure many people will not be happy.
eddieloera said:
I went out to Best Buy yesterday to get the Invisible Shield Glass Curve by Zagg and was not impressed. I'm going to try and return it in a couple hours..
The touch response is horrendous. I almost want to call Zagg directly and suggest they pull all these products from stores because I'm sure many people will not be happy.
Click to expand...
Click to collapse
:good:
Zagg isn't even special. they just came around the market early with heavy marketing tactics. Uses the "it cost more , must be better gimmick."
eddieloera said:
I went out to Best Buy yesterday to get the Invisible Shield Glass Curve by Zagg and was not impressed. I'm going to try and return it in a couple hours..
The touch response is horrendous. I almost want to call Zagg directly and suggest they pull all these products from stores because I'm sure many people will not be happy.
Click to expand...
Click to collapse
Thanks, looks like I will just go with a plastic protector. I've got a glass one on now but the touch sensitivity is pretty ****ty.
Not a great cover
eddieloera said:
I went out to Best Buy yesterday to get the Invisible Shield Glass Curve by Zagg and was not impressed. I'm going to try and return it in a couple hours..
The touch response is horrendous. I almost want to call Zagg directly and suggest they pull all these products from stores because I'm sure many people will not be happy.
Click to expand...
Click to collapse
I'm in the same boat with this screen protector. I put it on last night. I appreciated the little frame to help you guide it, but the screen response is crap. There is one section that I have to forcibly push down for it to register. There are some parts that lift and you can hear the plastic coming down to make contact with the screen when being touched. Not the best fit, and for $50 it better be perfect. Calling Best Buy after work to see about a return / refund. There was a $24.99 one there that I'll try next, but it didn't curve.
Just returned mine.
senor360 said:
I'm in the same boat with this screen protector. I put it on last night. I appreciated the little frame to help you guide it, but the screen response is crap. There is one section that I have to forcibly push down for it to register. There are some parts that lift and you can hear the plastic coming down to make contact with the screen when being touched. Not the best fit, and for $50 it better be perfect. Calling Best Buy after work to see about a return / refund. There was a $24.99 one there that I'll try next, but it didn't curve.
Click to expand...
Click to collapse
I just got back from Best Buy like 2 hours ago. I returned it and they asked no questions. I did, however, keep the screen on until I got there because I wanted to explain that I was afraid of breaking the screen protector upon removal. They said it was fine and to go ahead an remove it. It came off pretty easily, which made me wonder how long it would have stayed on if I would have decided to keep it. I got my $50 back and I instead bought the $24.99 I think you're talking about. Also made by Zagg called "HD Clear." Its a floppy plastic one and a lot harder to put on correctly but this is the one I had on my S6 and I loved it. Currently I have my S8 curing so the small bubbles can evaporate.
I'm wondering if after I return my Zagg I should just make a drive to the mall and visit the Ghost Armor kiosk and pay to have them put it on? Their website shows a 'case friendly' one costs $29.99 for the screen alone. Not sure how much the person putting it on would charge above that, but I've at least used them before and they also have a guarantee.
I had a tempered glass protector on my S6 that was great, but it had a flat screen so no issues. I tried 2 different tempered glass on my S7 Edge. Neither were any good so I went with a plastic shield that was OK but it's not the same as glass. I just put a Armorsuit plastic screen protector on my S8. It looks better than the one I had on my S7 Edge. If you go on Amazon and check out the reviews on the glass protectors, you see almost all bad reviews. The good reviews are probably mostly fake. I'm going to wait and see if someone finally makes a glass screen protector that actually works properly on curved screens.
I ordered the Philonext on Amazon, arriving tomorrow. I will post later on how it is.
The problem with the 3D curved tempered glass is that the adhesive they use is not like the flat glass versions. Not sure why no one can do this. If you look at all full coverage glass (had one for the LG V20, same issue) the adhesive is only on the outer most edges. Since the adhesive is like .02mm or so, the rest of the screen doesn't sit flat against the display. So this causes the user to use a bit more force to press down on the glass cover. Until someone can fully coat the glass with adhesive as the fully flat glass does, then all will suck. I bought the Verizon Full coverage glass and it's the same...bad touch sensitivity!
It is simply amazing how trashy most of the oneplus 5 screen protectors are. Just ordered idlehands tempered screen protector (goo.gl/i9x6xS) and it didn't fit as it claimed to (even the preview pictures show this!). The blacklines on the protector are spaced enough and go cover up part of the display! Most others are apparently trashy and low rated.... Anyone have luck? Having removed my factory screen protector, my screen is now vulnerable!
JhinCuatro said:
It is simply amazing how trashy most of the oneplus 5 screen protectors are. Just ordered idlehands tempered screen protector (goo.gl/i9x6xS) and it didn't fit as it claimed to (even the preview pictures show this!). The blacklines on the protector are spaced enough and go cover up part of the display! Most others are apparently trashy and low rated.... Anyone have luck? Having removed my factory screen protector, my screen is now vulnerable!
Click to expand...
Click to collapse
Orzly is the best one I got out of 3 I tried. If the black lines on the side cover any if the screen at, it's very very minimal.
ArkAngel06 said:
Orzly is the best one I got out of 3 I tried. If the black lines on the side cover any if the screen at, it's very very minimal.
Click to expand...
Click to collapse
The lines fully enter the onto display, which immediately makes my display area a few (about 4-5 from my own judgement) millimeters smaller. This is unacceptable imo.
JhinCuatro said:
The lines fully enter the onto display, which immediately makes my display area a few (about 4-5 from my own judgement) millimeters smaller. This is unacceptable imo.
Click to expand...
Click to collapse
You should see the first glass protector I got, it wasn't even close with how much screen was lost.
But from what I've heard, even the official OnePlus glass protector covers the screen on the edges, doesn't it?
JhinCuatro said:
It is simply amazing how trashy most of the oneplus 5 screen protectors are. Just ordered idlehands tempered screen protector (goo.gl/i9x6xS) and it didn't fit as it claimed to (even the preview pictures show this!). The blacklines on the protector are spaced enough and go cover up part of the display! Most others are apparently trashy and low rated.... Anyone have luck? Having removed my factory screen protector, my screen is now vulnerable!
Click to expand...
Click to collapse
it's the same with any 2.5D screen. every single SP is gonna have a flaw of some kind.
Any non glass/film that you recommend?
JhinCuatro said:
The lines fully enter the onto display, which immediately makes my display area a few (about 4-5 from my own judgement) millimeters smaller. This is unacceptable imo.
Click to expand...
Click to collapse
Assuming your referring to the Orzly tgsp, I'm surprised with your comment that it covers part of display screen. In the review video from the post in this XDA section, the review shows the Orzly installed and the bootloader screen displayed. The bootloader's left side text gives zero room for a screen protector to overlap and the video, to my mind, shows zero overlap of the text. Are you positive you applied it as well as the reviewer?
I've order the Orzly and am waiting for it to arrive so hopefully I'll get the same results as the reviewer and a couple of the installers who had zero rainbow effect. If it doesn't work out I'll be going back to a film screen protector as I've used on my devices for many, many years. The Orzly is my first tempered glass protector.
I'd like to echo the calls above: any good experiences with any plastic SPs?
I was happy with the preapplied SP, but I was putting some stuff (nice beermats I was nicking from a pub!) in my pocket and I managed to lift it on the bottom right, and it got covered in pocket crud straightaway. So I replaced it with the official OP TGSP, which I'm sort of 80% happy with. I have two (v small) bits on the right edge where it won't stick to the screen, and the borders covering the display bother me, particularly when I can't see the scrollbar to show me where I am in a page. Fond memories of my Nexus 5 and its perfectly flat display, I only ever needed one TGSP and it fit like a dream!
So what I'm looking for is ideally a) a TGSP with no border, as close to edge-to-edge coverage as possible without unstuck bits at the edges, and full screen adhesive so no rainbow effect. Failing that, option b) a plastic SP with coverage as good as the original preapplied one. Any tips? Preferably ones available from Amazon UK.
Many thanks in advance.
For me plastic SP are way better in looks.
Also never took the original one from OP devices.
But what's the plastic SP offers to OP5?
3DSammy said:
Assuming your referring to the Orzly tgsp, I'm surprised with your comment that it covers part of display screen. In the review video from the post in this XDA section, the review shows the Orzly installed and the bootloader screen displayed. The bootloader's left side text gives zero room for a screen protector to overlap and the video, to my mind, shows zero overlap of the text. Are you positive you applied it as well as the reviewer?
I've order the Orzly and am waiting for it to arrive so hopefully I'll get the same results as the reviewer and a couple of the installers who had zero rainbow effect. If it doesn't work out I'll be going back to a film screen protector as I've used on my devices for many, many years. The Orzly is my first tempered glass protector.
Click to expand...
Click to collapse
Not completely sure about the Orzly, but the screen protector I got is very similiar. Do tell me if the black edges (lines) go onto the display or not. I have provided a link to the amazon store for it (do note I cannot post links due to this account being new)
fluther said:
I'd like to echo the calls above: any good experiences with any plastic SPs?
I was happy with the preapplied SP, but I was putting some stuff (nice beermats I was nicking from a pub!) in my pocket and I managed to lift it on the bottom right, and it got covered in pocket crud straightaway. So I replaced it with the official OP TGSP, which I'm sort of 80% happy with. I have two (v small) bits on the right edge where it won't stick to the screen, and the borders covering the display bother me, particularly when I can't see the scrollbar to show me where I am in a page. Fond memories of my Nexus 5 and its perfectly flat display, I only ever needed one TGSP and it fit like a dream!
So what I'm looking for is ideally a) a TGSP with no border, as close to edge-to-edge coverage as possible without unstuck bits at the edges, and full screen adhesive so no rainbow effect. Failing that, option b) a plastic SP with coverage as good as the original preapplied one. Any tips? Preferably ones available from Amazon UK.
Many thanks in advance.
Click to expand...
Click to collapse
The official? Wow, looks like I basically just got a cheaper version of it.
JhinCuatro said:
The official? Wow, looks like I basically just got a cheaper version of it.
Click to expand...
Click to collapse
Yeah, I got it direct from OP as part of a bundle when I got my 5. I already knew it covered part of the display though, it says so clearly on the product page on their website. The one advantage it has over third party ones is that it's fully adhesive, so no rainbow/dot effects.
JhinCuatro said:
Not completely sure about the Orzly, but the screen protector I got is very similiar. Do tell me if the black edges (lines) go onto the display or not. I have provided a link to the amazon store for it (do note I cannot post links due to this account being new)
Click to expand...
Click to collapse
Here is a link to the Orzly tgsp on YouTube. Starting at the 4:27 mark he boots into the Bootlader screen and checks for screen protector display overlap.
I'll surely post my impressions once I get the Orzly tgsp myself but the video would probably give you all the info you need. Also here's the Orzly's amazon link and the XDA thread for this product. There is differing opinions but on the whole it seems like the only reasonable tempered glass option for the OP5.
I'm willing to try Nillkin's one ... I saw there is already a review of it in this forum, but I think i'm still gonna try it as it has no black border ( hate that ).
But still, from all reviews so far, Orzly SP looks like the best SP currently
I've always had great results with Skinomi, both their TechGlass and TechSkin. They currently don't offer the TechGlass for the OnePlus 5, but I just finished applying their MatteSkin protector and it installed perfectly . If they ever do release the TechGlass for the 5, I'll be picking one up.
Edit: I emailed Skinomi Customer Support about a TG protector and received this reply.
"Hello,
Thank you for your interest in our products.
naufrager said:
I'm willing to try Nillkin's one ... I saw there is already a review of it in this forum, but I think i'm still gonna try it as it has no black border ( hate that ).
But still, from all reviews so far, Orzly SP looks like the best SP currently
Click to expand...
Click to collapse
The Nilkon one sucks.
I received it yesterday, 1 side does not stick whatever you try, glass does not cover the entire screen so you get an horrible rainbow effect since the screen protector edge ends still on the display..
roba93 said:
The Nilkon one sucks.
I received it yesterday, 1 side does not stick whatever you try, glass does not cover the entire screen so you get an horrible rainbow effect since the screen protector edge ends still on the display..
Click to expand...
Click to collapse
Wow, rude
I will skip this one then, maybe going to try the Orzly one...
naufrager said:
Wow, rude
I will skip this one then, maybe going to try the Orzly one...
Click to expand...
Click to collapse
seems to be the only one that is good so far... even with its flaws (oil/rainbow stain, fingertips on the glass, ...)
Just on balance: Phone manufacturers (lots of them) have gone with this 2.5D curvature and obviously it's a tough thing to make the perfect fitting cover out of glass, so none of them are going to be perfect. What's the obsession anyway? It's just a protective cover. I've had the Orzley for a few weeks and it works great. Since mostly people with bad experiences are posting in forums (go on and check out any thread and see how many threads are saying "this works fine!"), you can't tell much from this thread except to only stack up bad experiences. It sure doesn't attract dust or prints.
Here's my experience: I applied it using the "steamed up bathroom to settle dust" technique, it took maybe 45 seconds to apply, went on perfectly. It is designed not to overlap any case, and only to "meet" the visible part of the screen. Yes it's close, but not as bad as the OP one. I've never heard a tap from the glass protector. I've never seen a color or rainbow on it, nor any dust underneath. The edges are sticky after 2 weeks. If you think about it, no adhesive that is removable is ever going to be able to hold down a piece of cut tempered glass in a way that doesn't create at least a bubble somewhere, not that it's a big deal. I don't think I've thought about the screen protector once until I read this thread after I applied it.
For some of us, the Orzly works fine. I'm going to take a wild swing and guess that I'm not the only person that this SP works for. I've used it with two cases and it works perfectly with both of them. One is a bumper like case from OP https://oneplus.net/oneplus-5-silicone-protective-case, and the other was one I got for nothing with the OP (A folio case?) . I'm fairly sure the Orzly will work with any case because it doesn't extend over the edges.
If you are one to believe every bad review will be your experience then just stay with the factory applied plastic. It works fine but you'll likely have to clean it pretty often since the fingerprint attraction is high. Other than that, it's fine. It might not help you if you drop it as well.
Iqshield. Good coverage, smooth feeling. I like their products
I've been reading all the threads in the forum after I brought my OP 5 yesterday (supposed to arrive to me in the next 2 weeks) and I cant find any solid recommendation.
There aren't any brands making screen protectors to our devices and even less reviews.
-I saw people saying to stay away from the original screen protector made by Oneplus due to the few millimeter lost cause by it.
-I looked on the Orzly screen protector and it looked quiet well but after searching the web I saw multitude negative reviews due lack of adhesiv, dot metrix and rainbows showing up on the screen. but some other who claims the protector is completely fine
In conclusion: In the Glass screen protectors section, there is no good product that will be fine with guarantee ?
If so, there is any other kind of screen protector (not glass one's) such as Skinomi or IQ Shield that are recommended?
I have to order any kind of screen protector as soon as possible before my device will arrive.
thanks for your professional support !
Every single option, glass or TPU, sucks. The best option is the non-glass protector that ships applied to the phone. Baby that one as long as you can.
Goronok said:
Every single option, glass or TPU, sucks. The best option is the non-glass protector that ships applied to the phone. Baby that one as long as you can.
Click to expand...
Click to collapse
I would agree with you, when it wouldn't collect more dust than a vacuum cleaner.
GTI86 said:
I would agree with you, when it wouldn't collect more dust than a vacuum cleaner.
Click to expand...
Click to collapse
Still the best, even covered in 2" of lint lol
As much as the screen protectors suck, the Orzly is stil the best of the bunch. I have it installed with no rainbow effect in the middle. Again, I think this is a case of people who have the issues are the ones you see. It depends on how you install it I guess. I know a few others who have also installed it without the rainbow, but I know people who have installed it and have had the rainbow. At least it is a fully screen protector, that doesnt cut off a millimeter of the screen basically, and at least they aren't a company that blames the user for obvious issues with their TGSP *cough* Oneplus *cough*
Take it from someone who has been through 5+ different screen protectors... About the only one that was semi worth a damn was Orzly. You run into ones that don't fill the entire screen and leave the edges exposed, don't stick, cover the front camera or ones that just flat out don't end up sticking. I wish I didn't end up taking off the one that the OP5 came shipped with but oh well lesson learned. As I said as of right now the only semi decent one is Orzly but even that one I had issues with the glue towards the edges peeling so the screen wouldn't respond because the protector was coming off the screen a little. Still though - Orzly or Manufacturer screen that was originally on the one are your best options at this point.
I really like the IQ branded film protector. I've had no problems with it and I only really notice it when I swipe along the edges and feel the film.
xeonyxorich said:
I really like the IQ branded film protector. I've had no problems with it and I only really notice it when I swipe along the edges and feel the film.
Click to expand...
Click to collapse
do you use the clear protector or the matte one?
how does it feel ? smooth enough? fingerprints residue ?
you dont have problems using it with cases?
liadatz said:
do you use the clear protector or the matte one?
how does it feel ? smooth enough? fingerprints residue ?
you dont have problems using it with cases?
Click to expand...
Click to collapse
I'm using the clear one. It's definitely not as smooth as glass but it's smooth enough. It's more smooth than a glass screen without a oleophobic coating. Fingerprint residue is minimal. The only case I have is the sandstone one from OnePlus and I have no problems with it.
xeonyxorich said:
I'm use the clear one. It's definitely not as smooth as glass but it's smooth enough. It's more smooth than a glass screen without a oleophobic coating. Fingerprint residue is minimal. The only case I have is the sandstone one from OnePlus and I have no problems with it.
Click to expand...
Click to collapse
Using the clear IQ protector here too. So far it's the best I've found. I've used the official TGSP, Orzly TGSP, and a couple other cheaper TGSPs. The wet application film screen protectors are the way to go for this phone it seems. Helps a lot with finger prints and I haven't had any issues with it not being slick enough.
think ill just go nude and use a thick case lol. haven't had any scratches on my s8+ which also has gorilla glass 5.
man do i hate how all phones have curved glass of some sort.
Damn those curves.. Let's hope that maybe in a few weeks we will finally get a proper screen protector.
cdig said:
think ill just go nude and use a thick case lol. haven't had any scratches on my s8+ which also has gorilla glass 5.
man do i hate how all phones have curved glass of some sort.
Click to expand...
Click to collapse
I went and removed the factory installed protector, it was a bad idea. Now I have small hairline scratches on the bottom right corner. I've now ordered a tempered glass in Amazon to hide the scratches.
The one that came with the phone is fantastic imo. I haven't enjoyed tgsp since my nexus 6p because of the 2.5D curved glass craze, no tgsp fits any phone good anymore. Axon, Samsung (ROFL, you thought OUR screen was bad?) , I haven't looked at the screen protectors for the G6, but the screen doesn't appear to be 2.5d so that's a step in the right direction..
When my stock screen protector gets unusable, I'll buy the 30$ crash guard from rhinosheidl ?????? Just to see if the hype is real...
Unless someone already has photos of it....
MrWilsonxD said:
The one that came with the phone is fantastic imo. I haven't enjoyed tgsp since my nexus 6p because of the 2.5D curved glass craze, no tgsp fits any phone good anymore. Axon, Samsung (ROFL, you thought OUR screen was bad?) , I haven't looked at the screen protectors for the G6, but the screen doesn't appear to be 2.5d so that's a step in the right direction..
When my stock screen protector gets unusable, I'll buy the 30$ crash guard from rhinosheidl Just to see if the hype is real...
Unless someone already has photos of it....
Click to expand...
Click to collapse
Any idea when the crashguard is shipping. I don't wanna drop that type of money without looking at reviews.
A Guy Called Revive said:
Any idea when the crashguard is shipping. I don't wanna drop that type of money without looking at reviews.
Click to expand...
Click to collapse
No idea whatsoever, my stock screen protector from oneplus is still in fantastic shape, so I don't imagine ordering four a couple more months at least.
The ones for the oneplus 3 are 13 dollars on amazon, and ship with prime in the US.. So I imagine in a few weeks the price will become more better.
I've recently seen this on the taobao site. GOR branded TSP. I've used their flat ones on other phones and am quite satisfied with the performance. They have 2 versions, one with the black border, one with a edge sealant sort of thing. I'm planning to get the sealant version next month since my option to add items for cheap shipping is exhausted for July....
If anyone's in China or has bought one, some feedback would be appreciated.
https://m.intl.taobao.com/detail/detail.html?id=554613982294
Sent from my ONEPLUS A5000 using Tapatalk
A Guy Called Revive said:
Any idea when the crashguard is shipping. I don't wanna drop that type of money without looking at reviews.
Click to expand...
Click to collapse
https://rhinoshield.io/products/oneplus-5-bumper-case?variant=35872333313
RhinoShield should be out by second half of August according to their site.
failure_2_win said:
https://rhinoshield.io/products/oneplus-5-bumper-case?variant=35872333313
RhinoShield should be out by second half of August according to their site.
Click to expand...
Click to collapse
that's only their bumper.
they are already sending out screen protectors.
i just received mine.
will send it back right away.
waaaay to small, doesn't even cover the display correctly.
Dinjesk said:
that's only their bumper.
they are already sending out screen protectors.
i just received mine.
will send it back right away.
waaaay to small, doesn't even cover the display correctly.
Click to expand...
Click to collapse
Its says in the description, "Not edge to edge protection. (NOT FULL COVERAGE)" so there is no false advertising