I tried Kingoroot, Iroot, Vroot, Framaroot, Rootmaster and many other aplikacija.
None have worked.Kingoroot sees my phone as a TCL Device(5038x), but the real name is Alcatel OneTouch D5 (5038x). Does anyone know how to root this phone?
Do you have an impact if it's locked bootloader. and if so how it unlocks.
People are explaining how to root the most popular phones, but not the specific phones like i have.
pop31 said:
I tried Kingoroot, Iroot, Vroot, Framaroot, Rootmaster and many other aplikacija.
None have worked.Kingoroot sees my phone as a TCL Device(5038x), but the real name is Alcatel OneTouch D5 (5038x). Does anyone know how to root this phone?
Do you have an impact if it's locked bootloader. and if so how it unlocks.
People are explaining how to root the most popular phones, but not the specific phones like i have.
Click to expand...
Click to collapse
Can you run adb shell? If so, run "adb shell" in a dos terminal do the following:
#cd /system/
# cp build.prop /sdcard/
# exit
Click to expand...
Click to collapse
Then from the same dos terminal run "adb pull /sdcard/build.prop" ... (make sure your current location e.g. c:\users\blablah\yadayada)
Then use windows explorer to navigate to where the build.prop was saved to view its contents (you should be able to open it using notepad or wordpad) ... report back the values for the following:
ro.build.version.release
ro.product.board
ro.board.platform
If it's MSM8212, 4.4.2 and MSM8610 you're pretty much out of luck...
And yes Alcatel bootloader for Qualcom (e.g. MSM8212) devices has thus far not been 'hacked' if you know what I mean.
This is how I managed to root
Maybe someone will help.
1.Instalirao'm on the computer Android SDK tools.
2.Onda Android ADB, Fastboot and other tools.
3.Instal Java developer kit 8u25.
I installed on their computers VRoot v.1.7.9.
I joined the phone, waited to recognize him and started Root.
My phone is rebooted, and asked to install VRoot and on the phone, which I did.
I started VRoot and on the phone, and so alternately I managed to root the phone.
Then I installed and started supers.
cant root
pop31 said:
Maybe someone will help.
1.Instalirao'm on the computer Android SDK tools.
2.Onda Android ADB, Fastboot and other tools.
3.Instal Java developer kit 8u25.
I installed on their computers VRoot v.1.7.9.
I joined the phone, waited to recognize him and started Root.
My phone is rebooted, and asked to install VRoot and on the phone, which I did.
I started VRoot and on the phone, and so alternately I managed to root the phone.
Then I installed and started supers.
Click to expand...
Click to collapse
Im not very good in this rooting process and i ve tried to root my alcatel d5 with vroot and framaroot and doesnt work
if u could me explaind a bit easier what i have to do? i would be graetfull thks and sorry for bad english
about DOS mode...
can somebody help me how to install dos on windows 10 pro technical preview, evaluation copy : 10041...or maybe help me root alcatel 5038x without dos. i would be grateful
toniternova said:
can somebody help me how to install dos on windows 10 pro technical preview, evaluation copy : 10041...or maybe help me root alcatel 5038x without dos. i would be grateful
Click to expand...
Click to collapse
You can root it withowt dos via pdanet. I rooted mine that way.
Mobo Genie is the way to go!
1. Download mobo genie
2. Install and run (close the window when it asks you do you want wifi connection or arabic connection)
3. Connect your device
4. Go to Tools>One Click Root
5. Profit!!!!1
blazeaster said:
You can root it withowt dos via pdanet. I rooted mine that way.
Mobo Genie is the way to go!
1. Download mobo genie
2. Install and run (close the window when it asks you do you want wifi connection or arabic connection)
3. Connect your device
4. Go to Tools>One Click Root
5. Profit!!!!1
Click to expand...
Click to collapse
Nope, cannot on pop D5 5038A
gl3nborj said:
Nope, cannot on pop D5 5038A
Click to expand...
Click to collapse
Looks like theres a major diference between 5038x and 5038a. I flashed my boot image with image for 5038a, and now its bricked!
These two mobiles are not compatible obviously.
NOTE TO EVERYONE:DONT FLASH ALCATEL POP D5 IF YOU ARENT ABSOLUTELY SURE THAT IMAGES/ROMS ARENT SPECIFIC FOR YOUR MODEL. IF YOU ARENT SURE WHAT IS YOUR MODEL ID, CHECK UNDER THE BATTERY
blazeaster said:
You can root it withowt dos via pdanet. I rooted mine that way.
Mobo Genie is the way to go!
1. Download mobo genie
2. Install and run (close the window when it asks you do you want wifi connection or arabic connection)
3. Connect your device
4. Go to Tools>One Click Root
5. Profit!!!!1
Click to expand...
Click to collapse
I tried mobo genie method and it starts one click to root after launching it (saw it in task manager) but it didn't root it.
I've also tried downloading one click root from official site and was without results.
The tool that worked for me was Shaume (shuame.com/en/root/).
It's a chinese based website which is probably one of the reasons.
After rooting it installed King User (basically SuperSU) and Cleaner Master.
PS: It might say that it failed to root but it worked.
Using POP D5 5038X.
BiscuitEdi said:
I tried mobo genie method and it starts one click to root after launching it (saw it in task manager) but it didn't root it.
I've also tried downloading one click root from official site and was without results.
The tool that worked for me was Shaume (shuame.com/en/root/).
It's a chinese based website which is probably one of the reasons.
After rooting it installed King User (basically SuperSU) and Cleaner Master.
PS: It might say that it failed to root but it worked.
Using POP D5 5038X.
Click to expand...
Click to collapse
Can you post some screenshots or any alternative methods of rooting? I am trying on 3 different PCs to root my 5038x with RootGenius but still with no luck :/
5038a Roms
any cyanogenmod 12.1 rom for alcatel one touch pop d5 5038a
Phone problems
I tried to install the latest version of software on alcatel pop d5 5038x(that one that appears when new software is available).Now my phone is stucked on boot menu. I tried the methods shown on interner but nothing works. I formated the phone it doesnt work. When I try to install software from pc it ways " There is no greater software version available to upgrade your phone,actual version on your phone is the latest". Can someone help me? When I turn on my phone enters boot menu and I tried everything and I cant access to the phone. Help me pleaseee
Related
Hello, i just recently purchased an Allview P5 smartphone, it's really cost efficient but recently i started getting some problems because the phone is not rooted and i was wondering how to root the android 4.04. i tried the superoneclick 2.3.3 and installed adb and something from java, bu when i rung the program superoneclick the program just freezes and it's not responding. any suggestions or guides that i should follow?
best regards
Chris
Try root for HaiPai I9220. For me it works.
Having the same problem here, Superoneclick freezes on step 7 iirc.
HaiPai didn't work for me either
So that: http://forum.xda-developers.com/showthread.php?t=1923764
There you will find this: http://www.mediafire.com/view/?othd1gf76pa97zg
It is 100% functional, but need more knowledge and skill.
Ok, I came a lot further this time, but still stuck.
As soon as I let Cygwin `patch` the recovery.img, it does the patching and stuff, but it doesn´t create a new recovery.img for some reason..
If you check page 13 of that PDF manual: I get all the same messages in Cygwin, except for that "Repacking" bit.
Any Idea why it isn't repacking?
Losing my nerves a bit because of Cygwin, what a horrible program to get to work properly. Installation went on beyond 100%, till about 2000% and then just started to count further in negatives >____<
You must have installed 7-zip archive program.
SuperOneClick should work for this device. You may try this:
1) unmount the sd-card, turn ON usb-debugging
2) turn OFF usb-debugging
3) connect device to PC
4) click "Root"
5) when "Waiting for Device" appear turn ON usb-debugging
6) when "Starting ADB Server..." turn OFF usb-debugging
7) then turn it back ON
8) and back OFF
9) repeat this while "Waiting for Device" appears again.
@Stovka: I have 7zip installed, the unpacking/extracting of the recovery.img goes fine in Cygwin, but for some reason it just skips the repack part.
@AndreyETO: As soon as I disable debugging mode, superoneclick stops the procedure, so I didn't get far with that
So sorry, I don't really know what is the problem...
It was all ok for me - the one problem was that I had not installed 7-zip, but after installing it worked exactly according to instructions.
If it were successful: after recording recovery.img to the phone is first necessary to go into CWM mode (no run phone) and install the root file attached. End CWM recovery mode is classically done by clicking on "reboot system now", but after the first time there appears one more option (just I don't know what name), which must be confirmed! Otherwise, when you restart the phone again, then will be loaded the original file and the recovery process must be repeated - upload modified recovery.img and then root file via CWM.
Found another way to root, and it worked
I used the method in this topic: http://forum.xda-developers.com/showthread.php?t=1886460 )I used the current newest version:V15)
The first time it didn't work, but after rebooting the phone and trying again it was succesfull
Anyway, thank you guys for trying to help.
Flapperbol said:
Found another way to root, and it worked
I used the method in this topic: http://forum.xda-developers.com/showthread.php?t=1886460 )I used the current newest version:V15)
The first time it didn't work, but after rebooting the phone and trying again it was succesfull
Anyway, thank you guys for trying to help.
Click to expand...
Click to collapse
Hey, i also tried this, and it didn't work, after clicking on restore that the device restared and than on the comand promp console it said error: device not found, i tried repeating the process several times but it didn't work, any other ideeas?
Neither of those above work for me either.. So... any other suggestions?
Confirmare
sics3th said:
Hello, i just recently purchased an Allview P5 smartphone, it's really cost efficient but recently i started getting some problems because the phone is not rooted and i was wondering how to root the android 4.04. i tried the superoneclick 2.3.3 and installed adb and something from java, bu when i rung the program superoneclick the program just freezes and it's not responding. any suggestions or guides that i should follow?
best regards
Chris
Click to expand...
Click to collapse
( for P5 allview mtk6577 4.0.4 ics2 )
Search this Root_with_Restore_by_Bin4ry_v15.7 on the forum. It works like a charm (both on linux and windows ).
It use restore feature on the phone.
The link is here http://forum.xda-developers.com/showthread.php?t=1886460
http://forum.xda-developers.com/attachment.php?attachmentid=1398011&d=1350123242
Anyone found a safe way to root this phone? Or maybe a custom rom for this one?
I think it is a great phone which should has a place into xda forum
Root_with_Restore_by_Bin4ry_v15
i have downloaded version 15 of this, because v17 for some reason did not worked...
so go ahead and enjoy.
Flapperbol said:
Found another way to root, and it worked
I used the method in this topic: http://forum.xda-developers.com/showthread.php?t=1886460 )I used the current newest version:V15)
The first time it didn't work, but after rebooting the phone and trying again it was succesfull
Anyway, thank you guys for trying to help.
Click to expand...
Click to collapse
i can confirm that this works.
now, can anyone tell how i can make a nandroid for this phone? couldn't find any image to boot with so i can see the partitions and use linux dd
U all can use this metod:http://forum.xda-developers.com/showthread.php?t=1886460 for rooting P5 Mini.
And watch this video tutorial:http://forum.xda-developers.com/showthread.php?p=33470626#post33470626
I rooted my P5 Mini with "Root_with_Restore_by_Bin4ry_v15" and it works fine.
works for P6 also
Flapperbol said:
Found another way to root, and it worked .
Click to expand...
Click to collapse
Same experience on Allview P6 Stony (P6_0201_V1179 software build). This method works for me - similarly I had to run the script (and the reboot cycle) 2x before it had an effect.
As pointers for others, before you try this method you need to make sure you have ADB drivers installed. Trying to install stock google drivers didn't work at all for me, what worked for me was installing latest PdaNet drivers (pdanetZ350.exe) from here: junefabrics.com/android/download.php *
Don't forget to install OTA Rootkeeper app afterwards and run it once - hopefully saves you the hassle of rooting again if the P6 should receive an incremental update.
Enjoy, thanks Flapperbol!
(*= sorry Im not allowed to post links)
Version 18 also works
Just to let you guys know that version 18 of Root_with_restore works. I just the ADB drivers from the PDAnet install (which I cancelled after the drivers were installed) and the phone is now rooted!
Does anybody know how to get rid of those ugly allview icons? I hate those things.
neelz said:
Just to let you guys know that version 18 of Root_with_restore works. I just the ADB drivers from the PDAnet install (which I cancelled after the drivers were installed) and the phone is now rooted!
Does anybody know how to get rid of those ugly allview icons? I hate those things.
Click to expand...
Click to collapse
u can install a new home launcher.i use nova launcher 2.0 prime and u can download icon package and install in nova
Please help me. Can you please tell me how to root iball slide 7803q-900 its running on android 4.4.2.
I searched the internet about this but I did not find any information regarding this.
Thanks
ashwanid said:
Please help me. Can you please tell me how to root iball slide 7803q-900 its running on android 4.4.2.
I searched the internet about this but I did not find any information regarding this.
Thanks
Click to expand...
Click to collapse
I am also looking for the same. The device is detected as "MyHTC" and it seems that the bootloader is locked. There is no fastboot option to get the device id to unlock bootloader. I can get into recovery mode. I am not able to post the link to the product page but you can search and find the same on site iball.co.in.
Please try installing Towelroot on your device and using it to obtain root. It will root many Kitkat devices.... uses a few different exploits to achieve root access.
There is a LifeHacker thread on it here: http://bit.ly/1qAobRl
I tried baudi root to root my device. The Chinese superuser is installed but there is no root access. And that superuser apk made my tablet sluggish. Can u tell how to remove the superuser.apk. my tab isn't rooted.
And towel root and many other apps doesn't work.
Thanks
And I want to tell that first I installed kingroot and my tab was rooted. But game killer was not working then I unrooted . then again tried with baudi root but It made my tab sluggish.
Please help to remove that superuser
Download the latest kingroot.
uttam27 said:
I am also looking for the same. The device is detected as "MyHTC" and it seems that the bootloader is locked. There is no fastboot option to get the device id to unlock bootloader. I can get into recovery mode. I am not able to post the link to the product page but you can search and find the same on site iball.co.in.
Click to expand...
Click to collapse
I could get into fastboot mode through adb command "reboot bootloader". However, fastboot screen is blank with only "Fastboot=>" mentioned at bottom left of screen. In bootloader mode device is recognized as "mtk6582_phone". I don't have the phone ROM file that could have been used to create custom CWM recovery and without root I cannot backup the phone ROM. One-click root methods fail. Any ideas?
Try to root with kingroot it rooted this device.
Download the latest version of this app.
ashwanid said:
Try to root with kingroot it rooted this device.
Download the latest version of this app.
Click to expand...
Click to collapse
I am little skeptical about using methods that are not well-known. You mentioned you faced some issues after this..?
I tried Kingo but it failed
I said to use kingroot and not Kingo root. Download it here kingroot.net
So here's the long awaited root!!!
Just use the following root tool. I just Used it myself
Its called root genius
Download it here
htt p :// downloa d1766 . mediafire .com /9g59 3gbw8bjg/j17ivc iz1x808wo/RootGen ius_v2.3.0.zip
Just backspace the spaces in the link and copy it to the address bar of your browser then press enter to download the file.
This is because i couldn't post a link
I am sure this works fine
it worked fine for me
Connect the Tablet to your pc and click on root
That's it
Congratulations! You have rooted your tablet...
Hope this Helps
Regards
Adarsh Mathai
Just use iroot (also known as vroot) Easy steps starts here:
1. DOWNLOAD iroot /vroot
2.Use ur usb cable and connect ur phone to pc
3. Put ur phone in usb debugging mode available in developer option
4. IF u dont have developer option then go to setting->about phone and continously click build number till you get notified.
5. And open vroot and let it detect ur phone. It will ask permission so give permission from ur tablet. It will download and install some drivers.
6. U can see there is a option to root ur phone go ahead and click it
7. Ur tablet may restart so don't. Pannic
Volla rooted ur iball
Hi I have been trying to root my Android device.
Maximus Max-909
Android 4.0.4
Software I tried:
Farmaroot
Towelroot ( Doesn't support my device )
KingRoot
Root Genius
mt6589_rooting_pkg
Cydia Impactor (Can't find Driver software Err Msg: Write:No space left)
Root_with_Restore_by_Bin4ry_v36 (Method 3, 5)
Note: I Checked with Root Checker if Root worked
I did a factory data reset after I tried each Method
About the driver software:
The driver software is working. I am sure of this because I am a beginner at developing
Android application and I have been running my Soft from eclipse using USB Debugging on my phone.
I also used SnapPea which works fine for connecting my Android to my Computer.
But in the Device Manager it shows my device "YunOS Phone" insted of "Android Phone" (using Windows 8.1 Laptop)
My Driver name is YunOS ACB Interface.
I have been trying this for Almost a week.
I really need some Expert help on this. Can anyone please point to the right direction.
have you tried with Vroot it seems good ?
if you succeed you have to change chinese supersu ( google search )
It worked
jean.michel.78 said:
have you tried with Vroot it seems good ?
if you succeed you have to change chinese supersu ( google search )
Click to expand...
Click to collapse
Hi, Thanks :good: for your suggestion. VRoot installed a SuperUser ( Kinguser ), Its English. But when I checked with Root checker it still shows No Root Access. I repeated the whole process. I think I missed a step ( VRoot shows my phone is rooted ).
Can you please tell me what should be my next step.
@Firefly244
Try Towelroot. Press the Lambda (greek letter) to download it.
https://towelroot.com/
Doesn't work
christi9503 said:
@Firefly244
Try Towelroot. Press the Lambda (greek letter) to download it.
Click to expand...
Click to collapse
Towelroot doesn't support my device. Sorry I should have mentioned it before. Thanks anyway.
dont try several tools if you have succeeded with vroot you can damage your device
you can check by typing "su" in a terminal emulator
after you have only to switch chinese supersu by chainfire supersu
http://forum.xda-developers.com/showthread.php?t=2532818
after you can test get titanium backup who ask to be root
and you can suppress applications you dont want be carefull anyway
Hi im new... and I would like to ask how to root alcatel one touch pop s3 5050X android version 4.3
there was a post already on how to root the device but it doesnt work on model 5050X
any help will do. thank you.
sorry if the thread is in the wrong section
Sicnarf26 said:
Hi im new... and I would like to ask how to root alcatel one touch pop s3 5050X android version 4.3
there was a post already on how to root the device but it doesnt work on model 5050X
any help will do. thank you.
sorry if the thread is in the wrong section
Click to expand...
Click to collapse
See the instructions (author has since updated) at
http://click.xda-developers.com/api...Touch Pop S3</b> 5050 | Every Android version
and the second page comments for recovery hints. TWRP requires some study and preparation before use so it's not good to be stuck when attempting recovery.
Note the comment on the 3rd page about the updated recovery image that lets you see what you are doing on the screen. For me I got it working, working in the dark (ie. not seeing anything on screen), so it's too early for a video tutorial.
Please Help me :/
When i use the .cmd, i put /storage/sdcard0 or /storage/sdcard1
I have a message :
''The specified path was not found''
Rooting using Kingo Root
Rooting nowadays is very simple.
But the easiest way to do it is the following:
1. Download Kingo Root for Windows, Mac or Linux;
2. Install Kingo Root;
3. Open the program;
4. Connect your phone to your pc through USB cable and wait for Kingo Root recognize it;
5. If your phone is rootable it will appear a button saying "ROOT", click there (If your device is not rootable then you are out of luck and you must try another method)
6. Don't remove your phone and don't click anywhere, wait until the rooting process is finished;
7. After this your phone should reboot, it means you are now rooted (If your phone did'nt rebooted, manually reboot it then);
8. Enjoy!
Note: Rooting will void the device's warranty, root at your own risk.
Download the phone's drivers if needed and disable Windows, Mac or Linux firewall if needed.
Hope it works for you!
Link for Kingo Root: kingoapp.com
So I as successfully able to root the phone using the Windows version of Kingo Root and then installed Super Su and Busy Box but I can't get a recovery to work on it, yet.....would love a Recovery like TWRP or Phil's and CM13 port for this phone.
Finally got it rooted with KingRoot
Just noticed that the build.prop has the ro.build.id-LMY47V
That's the 5.1.1 for the 2013 Nexus 7
OldMansGhost said:
Finally got it rooted with KingRoot
Click to expand...
Click to collapse
Hi I would to know how you rooted the Coolpad Rogue 3320A. I was looking at Kingo root and KingRoot and they dont give good instructions.
I tried the android versions of both KingRoot and Kingo Root without success. The Windows version of Kingo Root failed but the Windows version of KingRoot succeeded in rooting my Coolpad Rogue 3320A.
The Kingo Root Windows app gives instructions in English when you run it. Which are to connect the phone to the computer with a USB cable and enable "USB debugging" in the phone's "Settings" under "Developer options'. Then click the ROOT button when it appears. KingRoot is in Chinese, but I just followed the same procedure.
To get "Developer options" to show in the phone's settings , you need to give 7 or 8 taps to the "Build number" under "About phone" in the phone's "Settings".
Before I tried rooting I also ran COOLPAD-140926-SETUP.EXE in the CD Drive labeled "Coolpad_USB_Driver" that shows up in Windows Explorer when the phone is connected to the PC by USB cable. I also installed minimal ADB and Fastboot and Google USB drivers using 15 seconds ADB Installer v1.3 http://forum.xda-developers.com/showthread.php?p=48915118 But I think that they may not have been necessary.
The version of Windows KingRoot I had success with was KingRootSetup_v3.1.0.1125_105002.exe downloaded from kingroot.net
There's a setting in the developer options to allow the bootloader to be unlocked. I've not tried to fastboot to work yet.
"Vanilla" ROM or at least vanilla dialer/phone apps?
I'm interested in some kind of vanilla dialer/phone/telecom app set (5.1.1 based) or a full ROM that's AOSP so that I can toss out T-Mo's "Wi-Fi Calling" and use the built-in Android SIP client with its normal configuration screens.
If anyone has accomplished the same with this device or any other T-Mo 5.1 based device, please let me know. I'd really like to be able to configure the system dialer to connect to my SIP PBX directly rather than use a half dozen hacks to give me half-working VoIP calling of my own.
(Note: If there's a T-Mo 4.4 based image out there, that would suffice, as I can at least make VoIP apps intercept dial requests, which T-Mo Wi-Fi Calling prevents on 5.1. This device shipped with 5.1, but it might be possible that a similar model's ROM image might work on this as well.)
/system image
anyone with a rooted 3320a that might be able to provide me with a stock(or rooted stock) image of /system? i managed to softbrick my device after rooting and i forgot to do a dd of the system partition before mucking around in it
thanks in advance
Root Genius Might Work
venuspcs said:
So I as successfully able to root the phone using the Windows version of Kingo Root and then installed Super Su and Busy Box but I can't get a recovery to work on it, yet.....would love a Recovery like TWRP or Phil's and CM13 port for this phone.
Click to expand...
Click to collapse
My Arise don't have a custom recovery either. This kind of disappoints me, as this phone is a good phone for the price.
However, I thought I'd share with you guys that Root Genius may also work to root the Rogue as it does root my Arise. (I don't own a Rogue, so I can't confirm this.) It's always better to have more than one way to root your phone safely right?
Kingroot
mcduffy said:
I tried the android versions of both KingRoot and Kingo Root without success. The Windows version of Kingo Root failed but the Windows version of KingRoot succeeded in rooting my Coolpad Rogue 3320A.
The Kingo Root Windows app gives instructions in English when you run it. Which are to connect the phone to the computer with a USB cable and enable "USB debugging" in the phone's "Settings" under "Developer options'. Then click the ROOT button when it appears. KingRoot is in Chinese, but I just followed the same procedure.
To get "Developer options" to show in the phone's settings , you need to give 7 or 8 taps to the "Build number" under "About phone" in the phone's "Settings".
Before I tried rooting I also ran COOLPAD-140926-SETUP.EXE in the CD Drive labeled "Coolpad_USB_Driver" that shows up in Windows Explorer when the phone is connected to the PC by USB cable. I also installed minimal ADB and Fastboot and Google USB drivers using 15 seconds ADB Installer v1.3 http://forum.xda-developers.com/showthread.php?p=48915118 But I think that they may not have been necessary.[/Q UOTE] I opens kingroot in my browser and used it for translation
Click to expand...
Click to collapse
hi guys,i av rooted coolpad 3320a with kingroot windows version but when i try to unlock with sigma box it says root the phone first. Anyone with a solution pliz help. Thanks in advance
KingRoot (Android version) worked for me
mcduffy said:
I tried the android versions of both KingRoot and Kingo Root without success. The Windows version of Kingo Root failed but the Windows version of KingRoot succeeded in rooting my Coolpad Rogue 3320A.]
Just another data point. . .
KingRoot (Android app) v4.9.0 142 worked on this Coolpad:
Model: 3320A
Android: 5.1.1
Baseband: GW_T2_01134._01
Kernel: 3.10.49 (08/10/2015)
Build: 5.1.157.00.T2.150810.LMY47V
Happy camper -- For $20 this is a great no-tears tinkering platform.
Click to expand...
Click to collapse
myoshinaga said:
mcduffy said:
I tried the android versions of both KingRoot and Kingo Root without success. The Windows version of Kingo Root failed but the Windows version of KingRoot succeeded in rooting my Coolpad Rogue 3320A.]
Just another data point. . .
KingRoot (Android app) v4.9.0 142 worked on this Coolpad:
Model: 3320A
Android: 5.1.1
Baseband: GW_T2_01134._01
Kernel: 3.10.49 (08/10/2015)
Build: 5.1.157.00.T2.150810.LMY47V
Happy camper -- For $20 this is a great no-tears tinkering platform.
Click to expand...
Click to collapse
So what is the final verdict?
Click to expand...
Click to collapse
Hello, but I have a question. Is busybox OK on this device? I am afraid that installing it may brick the device
got it working with kingo root, but only after kingroot said it worked. otherwise kingo root kept freezing. havent been able to get supersu installed but kingo root works just fine
I was able to root the coolpad rouge without a computer. I'm going to create an account and upload the tut. -cyphermil
myoshinaga said:
So what is the final verdict?
Click to expand...
Click to collapse
You CAN root this with the Kingroot apk.
I'm new and can't post links so to make the links below work just abbrev the http and add a colon.
As soon as I can post links I will fix them.
PROOF:
Hypertexttransferprotocol//imgur.com/a/SXmMc
Here's what I did:
1) download latest kingroot Hypertexttransferprotocol//androidmtk.com/download-kingroot-application
2) enable USB debugging in developer options
3) enable OEM boot loader unlock in developer options
6) enable unsigned APKs
7) install kingroot apk
8) run kingroot
9)?
10) PROFIT
Will update with better details later. Sorry for mistakes and formatting I'm on my rooted coolpad rouge.
Kotetsukun said:
Hello, but I have a question. Is busybox OK on this device? I am afraid that installing it may brick the device
Click to expand...
Click to collapse
Busybox is safe to install. Will post screenshots when I am able to include links
Never mind. I am happily satisfied anyways. Thank you.
Coolpad Rouge 3320A
So im am writing this post via on my mac...
So i want to root my phone but when i tried to install king root i got to 90 percent then the app closes its self and disables my wifi unless i reboot my phone.
im just need to root my phone for to install xposed framework and installer
~Ninja, Aug/13/16