Q&A for [ROM] Eclipse v2.3 (7/25/12)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] Eclipse v2.3 (7/25/12). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
stuck on updating to 2.3.5
basically, im stuck at the
apply 235update from recovery mode...
what does that mean, i mean i had 2.3.5 at first, then went back to 2.3.4 then rooted it, did what you said, but how do i update back to 2.3.5. so i can finally run this damn thing
d3c4L said:
basically, im stuck at the
apply 235update from recovery mode...
what does that mean, i mean i had 2.3.5 at first, then went back to 2.3.4 then rooted it, did what you said, but how do i update back to 2.3.5. so i can finally run this damn thing
Click to expand...
Click to collapse
download the 2.3.4-380 to 2.3.5-418 update, place it on the sd card
or flash the 2.3.5 sbf and root with magic md5
It was a pain for me too, but it's a great rom, just wish I could find some themes for it.. All links are deader than 4 o'clock..
Edit: I did the 2.3.4 SBF with root and cwm scripts in Linux from the All in One iso. I used the root keeping apk (forgot the name), told it to backup root, then disabled root. Then, I rebooted into the stock recovery and applied the update, after rebooting, I restored root with the magical root saving app and voila! 2.3.5 with root...
Oh, I must mention I got everything from SD_Shadow's Awesome collection of everything needed for the X2 and X. His collection is the one stop shop for everything X and X2. Almost everything that is.
Related
Q&A for [ROM][STOCK][SGH-I527M] Rooted Stock 4.4.2 I527MVLUCNE5 Kitkat Firmware
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][STOCK][SGH-I527M] Rooted Stock 4.4.2 I527MVLUCNE5 Kitkat Firmware. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Loaded this today on a Bell i527m, but I'm getting 'Image size too large!! W:1080 H:1920' display image fail SECURE FAIL: KERNEL
Any ideas what I can try? Bootloader maybe?
Thanks!
QA Bot said:
Q&A for [ROM][STOCK][SGH-I527M] Rooted Stock 4.4.2 I527MVLUCNE5 Kitkat Firmware
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][STOCK][SGH-I527M] Rooted Stock 4.4.2 I527MVLUCNE5 Kitkat Firmware. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Click to expand...
Click to collapse
Boot.img is the first thing that Odin flashes from the package, so if the upload succeeds, it means the kernel has passed signature verification and *should* work. The message you mention is usually displayed in the case of a downgrade, not an upgrade. I guess it's possible that the phone's bootloader may not support a newer kernel, but this has not usually been the case in Samsung phones.
If you would like to try updating to the latest bootloader (Knox included), here is a link:
BL_I527MVLUCNE5_REV00_user_low_private_NO_CERT.tar.md5
Let me know if it fixes your issue, and I will add it to the OP.
phone keeps rebooting
Hi guys I have the galaxy sgh-i527m and have been running megafire for a long time but I just wanna try out this kitkat rom and after installing it with odin 3.07 my phone keeps rebooting after the set up screen comes on. I did wipe everything before installation and even after it was rebooting after set up screen I tried again to wipe data and factory reset but still the same. Any ideas someone
I'm not sure what could cause that issue, given it is a stock ROM with nothing other than root added. I'd recommend removing any SD card you may have in your phone, or formatting the internal storage, in case they have data that the stock ROM doesn't like. Maybe that has something to do with it.
krazykipa said:
I'm not sure what could cause that issue, given it is a stock ROM with nothing other than root added. I'd recommend removing any SD card you may have in your phone, or formatting the internal storage, in case they have data that the stock ROM doesn't like. Maybe that has something to do with it.
Click to expand...
Click to collapse
Ok thanks will try tomorrow and let you know
krazykipa said:
I'm not sure what could cause that issue, given it is a stock ROM with nothing other than root added. I'd recommend removing any SD card you may have in your phone, or formatting the internal storage, in case they have data that the stock ROM doesn't like. Maybe that has something to do with it.
Click to expand...
Click to collapse
did everything you told me and its still the same but it reboots every 5 minutes but everything else works good. I really wanted to try this stock kitkat but if i cant figure out whats going on I will have to stick with megafire which is really good but i am curious about kitkat.
---------- Post added at 10:08 AM ---------- Previous post was at 10:01 AM ----------
Do you think the new bootloader could help or i can brick my phone since this rom is not working on my phone
Anyone else got any problems flashing this rom? I really would like to give this rom a try but I tried 2 times now and it keeps rebooting after a couple of minutes of running
Since it runs for a couple minutes, it would be worth turning on USB debugging and posting logcat output to see what is happening.
no sound
Hey guys my baseband and wifi are back working thanks... but i have no sound any ideas
4.4.2
baseband 1527mvlucne5
kernal 3.4.0-1739918
build KOT49h.i527m_4.4.2_0016
---------- Post added at 06:38 AM ---------- Previous post was at 06:33 AM ----------
Just a heads up for those that are having issues flashing.
make sure you untick reboot after. let it sit when its done flashing for 3 minutes.
I also had to do it twice with a wipe and clear of cache.
mines working
This firmware got the WiFi and baseband working again (thanks) Is there anything i can do to get the eBay replacement touch screen working on Samsung kitkat 4.4?
Currently, the only known solution is to use a genuine digitizer. I believe a possible workaround is to unplug your LCD, turn on the phone, and then reconnect the LCD. However, this needs to be done every time you reboot the phone, so it's not really viable.
Thanks
I wanna thank you a lot for putting up this ROM toghether and make it available.
i fix a phone that everybody told it was gone. (No sound, No Baseband, No Imei)
i've first Upgraded my bootloader, then flashed your rom with ODIN.
Thanks and i'll send you a christmas present in form of a donation.
Cyrille.
[Q&A] [ROM][SIRIUS][KK][4.4.4][LINARO/SABERMOD] Paranoid Android 4.6 [BETA 5][DSB]
Q&A for [ROM][SIRIUS][KK][4.4.4][LINARO/SABERMOD] Paranoid Android 4.6 [BETA 5][DSB]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][SIRIUS][KK][4.4.4][LINARO/SABERMOD] Paranoid Android 4.6 [BETA 5][DSB]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
i am confused..
yesterday i went back to latest stock on my z2 because there were no updates on paranoid android since beta2 and now i see a thread with PA beta5? I am confused whats the difference between this two versions? why here an update and there not?
Same here.
Recovery lost and some FC
Hello everyone, I'm new here on Sony threads, I've onlways been on Samsung's, so I'm a bit lost with every tricks with have to do here to flash a rom.
So I wanted to install this PA version, so I unlocked my BL and so on, I managed to get a CMW and to install this version (and by extension TWRP 2.8.1). So until yesterday everything went fine, but suddenly this morning I got some FC, with antutu, gravitybox, link2sd, and some SystemUI FC... I even lost my recovery, and can't go to it, even if the led light becomes orange as it does in normal times...
I tried to flash another kernel, or to go back to CWM, but then I got bootloops. So I really don't know what to do, I Managed to reinstall my PA version, but I still got the same problems.
Apart that, I dont have any wifi or any system problems.
Thanks for your eventual help !
Wipe ...
Wipe Cache only?
[Q&A] [ROM] dOPE-PSOA 4.4.4-A HYBRID WITH PURE AOSP-Multi-Themed-SuperFAST&SMOOTH4SA
Q&A for [ROM] dOPE-PSOA 4.4.4-A HYBRID WITH PURE AOSP-Multi-Themed-SuperFAST&SMOOTH4SAFESTRAP
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] dOPE-PSOA 4.4.4-A HYBRID WITH PURE AOSP-Multi-Themed-SuperFAST&SMOOTH4SAFESTRAP. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
liv3dn8as said:
@LGtMgG2t
Just got it working with that as well! Thanks for the reply. Glad to know it was the same fix! Now I can get back to fixing my original error, com.android.phone stops working. Thankfully it only happens when it first boots. I did just notice though that my SMS aren't sending sometimes. Not sure why yet! Time for a logcat!
Click to expand...
Click to collapse
How exactly did you get this working? I've tried flashing the NG6 one mentioned plus rebooting multiple times to no success. I also went back and tried the NC5 since that is what got me working on my last ROM.
GreatMoloko said:
How exactly did you get this working? I've tried flashing the NG6 one mentioned plus rebooting multiple times to no success. I also went back and tried the NC5 since that is what got me working on my last ROM.
Click to expand...
Click to collapse
I'm back to using the NC5 modem/baseband now to check battery drain but I got the ROM WiFi working with jfltevzw-NC5-modules.zip. The NG6 modem and modules have always worked on every other ROM for me but I didn't try them on this one yet.
Any updates on the Wifi not remembering networks bug yet? Thats the only thing holding back this rom
Q&A for Stock Deodexed Jellybean ROMS | DXLS8 Added [19/5]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Stock Deodexed Jellybean ROMS | DXLS8 Added [19/5]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Slimkat 4.4.4 to Stock Deodexed JB ROM
Alipk52 said:
Hope is intact for me though btw I flashed france & indian stock firmware directly from odin, and then just rooted it with stock recovery and without flashing cwm, now i haven't find a single sod or freeze issues yet, but france one is perfect and smoothest of all, inu version is bit laggy, but I am happy my measure issue is sorted now, btw 4.4 kitkat is designed to run smoothly even on a single core cpu with like 512mb ram, but as you said, they'll not gonna waste their presious time to work on our outdated phones
Click to expand...
Click to collapse
Hi there, I like to use this Deodexed JB ROM, currently on Slim-4.4.4 9 official 8260 (GT-I9100G; XXLSP; Kernal - 3.0.85+; CWM recovery 6.0.5.1). My question is will CWM 6.0.5.1 recovery will serve the purpose? what are the steps involve for flashing? Is odin is mandatory? a post outlines the following steps, is this ok? It also says to use temporary CWM, will my current CWM will do?
"Quote:
Originally Posted by iXanza
Note : You need to have CWM to flash this
Wipe data/factory reset
Format System
Flash ROM
Wipe data/factory reset
Reboot.
This comes with STOCK KERNEL WITH NO CWM. Be sure to grab the Temporary CWM Zip"
looking forward
Q&A for [ROM] [5.1.1_r5] XenonHD (28.06.15) (Layers)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [5.1.1_r5] XenonHD (28.06.15) (Layers). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
System UI has crashed
I flashed the ROM without any trouble, but as soon as I mess with any of the toggles in Settings, I get a System UI has crashed error over and over and can't do anything until I pull the battery and boot into TWRP and re-flash. Is there a reason for this or a fix? And another random question, does this ROM support F2FS? Everything I've read says that AOSP 5.1.1 supports it, and so does this Kernel.
PagingDrSteele said:
I flashed the ROM without any trouble, but as soon as I mess with any of the toggles in Settings, I get a System UI has crashed error over and over and can't do anything until I pull the battery and boot into TWRP and re-flash. Is there a reason for this or a fix? And another random question, does this ROM support F2FS? Everything I've read says that AOSP 5.1.1 supports it, and so does this Kernel.
Click to expand...
Click to collapse
Wiping dalvik and cache clear up a lot of these issues for me . If that doesn't clear things up would normally reinstall the ROM and make sure you are using the correct version of gapps.
Make sure you wipe your dalvik, cache, data, system, (not internal SD) though.
Good Luck,
Ripley
For the life of me I cant get the Linux enforcing to go permissive. Ive always used toolbox and for some reason the buildprop. Will say set to 0 but it doesn't change a thing. Does anyone know of another way maybe thru terminal or something?
ZV4?
So I have the LgG3 sprint or the ls990. I currently have it rooted on ZV4.
Can I flash this rom without upgrading to ZV8? because the last time that I tried keeping my root while upgrading to ZV8 I bricked my phone.
and or what rom would work to flash on ZV4 or ZV6 with less risk of hard bricking the phone.
any help would be appreciated.
Edit:
I flashed it and I love this rom the only thing is that I have no data. How can I fix this? I already tried flashing just the modem.img of ZV8 but that did nothing. and made it really hard to boot into the rom. Is there something that I could change in the build.prop so that I have data?