S5 clone pls help! - Android Q&A, Help & Troubleshooting

I have S5 clone and have some problem, MTKdroidtool show hardware MT6589, but CPUZ say: MT6582 Total Ram:1062Mb, internal storage:0.48Gb, 2 cores 598-1300 Mhz
And the worst my phone has UBIFS file system, already successfully rooted and i made backup with mtkdroidtool, but when i try flash back the backup i get error:
Brom error: S_CHIP_TYPE_NOT_MATCH (3168), or the flash process not start, no error, nothing.
Sry for bad english.
Mtk droidtool say:
Hardware : MT6589
Model : SM-G900H
Build number : ALPS.JB7.MP.V1.14
Build date UTC : 20140924-035523
Android v : 4.4.4
Baseband v: -----
Kernel v : 3.4.39 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Wed Sep 24 11:53:37 CST 2014
LCD driver: 1-sh 1282g_dsi_vdo

There Is No Help
You can respond in your native language if you like, I can translate almost anything.
The company that made the computer chips in your phone did not match the chip types with all of the apps that would need the chip types labelled properly. So as with the backup, the backup application (or recovery system) does not recognize your hardware. Therefore, it cannot properly flash the backup because it doesn't know what hardware you have and it doesn't want to hurt your device.
Please respond in your native language and use the Thanks button!

AndrMatr said:
You can respond in your native language if you like, I can translate almost anything.
The company that made the computer chips in your phone did not match the chip types with all of the apps that would need the chip types labelled properly. So as with the backup, the backup application (or recovery system) does not recognize your hardware. Therefore, it cannot properly flash the backup because it doesn't know what hardware you have and it doesn't want to hurt your device.
Please respond in your native language and use the Thanks button!
Click to expand...
Click to collapse
Szóval kaptam ezt a telefont még működőképes állapotában rootoltam egy programmal csak azzal lehetett a többivel nem ment mert UBIFS file system -es a telefon.
Majd csináltam róla egy mentést és mivel elég kevés hely volt rajta, megpróbáltam sd kártyára rakni pár dolgot pontosabban hogy oda telepítsen.
A problémám, hogy ezután már nem tölt be a telefon bekapcsol hallom a kezdőhangot kiírja hogy mediatek (egyébként gyári visszaállításig samsungot írt valószinű hamisítvány) majd jön az android logo és onnantól semmi nem történik.
Próbáltam visszatenni a mentésemet amit Mtk Droid toolal csináltam, de nem megy az Sp Flashtool error 3168 (s chip type not match) üzenettel megáll.
A készülék adatai az előző hozzászólásomban van van.

Milo01 said:
Szóval kaptam ezt a telefont még működőképes állapotában rootoltam egy programmal csak azzal lehetett a többivel nem ment mert UBIFS file system -es a telefon.
Majd csináltam róla egy mentést és mivel elég kevés hely volt rajta, megpróbáltam sd kártyára rakni pár dolgot pontosabban hogy oda telepítsen.
A problémám, hogy ezután már nem tölt be a telefon bekapcsol hallom a kezdőhangot kiírja hogy mediatek (egyébként gyári visszaállításig samsungot írt valószinű hamisítvány) majd jön az android logo és onnantól semmi nem történik.
Próbáltam visszatenni a mentésemet amit Mtk Droid toolal csináltam, de nem megy az Sp Flashtool error 3168 (s chip type not match) üzenettel megáll.
A készülék adatai az előző hozzászólásomban van van.
Click to expand...
Click to collapse
Üdvözlet,
Ha jól tudom, hiszen a telefon egy hamis, a fájlrendszer a klón nem egyezik meg a helyreállítási / ROM telepítő és az ROM telepítő nem ismeri fel a hardvert, így nem tudja folytatni. Nincs mód arra, hogy visszaszerezze a telefont, mert szurkolni elvesztjük a garanciát. Meg lehet próbálni, így azt az üzletet, ahol vásárolta meg (ha vásárolt egy boltban), és egy kis díjat lehet, hogy cserélje ki. Ugyanakkor nem vagyok benne, hogy lesz erre. Elnézést kérek, nem vagyok a sok segítséget.
Sajnálom a rossz magyar.

A. we don't deal with cheap knock off clones.
B. Do t listen to random people. All posts have to be in English.

zelendel said:
A. we don't deal with cheap knock off clones.
B. Do t listen to random people. All posts have to be in English.
Click to expand...
Click to collapse
Is there a Foreign XDA site? Just curious, maybe I should make one? But that would be complicated...

Milo01 said:
I have S5 clone and have some problem, MTKdroidtool show hardware MT6589, but CPUZ say: MT6582 Total Ram:1062Mb, internal storage:0.48Gb, 2 cores 598-1300 Mhz
And the worst my phone has UBIFS file system, already successfully rooted and i made backup with mtkdroidtool, but when i try flash back the backup i get error:
Brom error: S_CHIP_TYPE_NOT_MATCH (3168), or the flash process not start, no error, nothing.
Sry for bad english.
Mtk droidtool say:
Hardware : MT6589
Model : SM-G900H
Build number : ALPS.JB7.MP.V1.14
Build date UTC : 20140924-035523
Android v : 4.4.4
Baseband v: -----
Kernel v : 3.4.39 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Wed Sep 24 11:53:37 CST 2014
LCD driver: 1-sh 1282g_dsi_vdo
Click to expand...
Click to collapse
Upload backup and send link for experiments.
My phone is bricked and i want recovery
The true chip is MT6571

nesa67 said:
Upload backup and send link for experiments.
My phone is bricked and i want recovery
The true chip is MT6571
Click to expand...
Click to collapse
I don't know any place to upload such a big file.
And my phone has a 2nd problem i try to free up some space in phone with this method :
youtube.com/watch?v=jcB8XM-y9TY
but after restart my phone boot to android logo and that's it.
I put adbplugin to my total commander i can see the phone storage, and i dont know what can i do because i can't flash back the phone.

Milo01 said:
I don't know any place to upload such a big file.
And my phone has a 2nd problem i try to free up some space in phone with this method :
youtube.com/watch?v=jcB8XM-y9TY
but after restart my phone boot to android logo and that's it.
I put adbplugin to my total commander i can see the phone storage, and i dont know what can i do because i can't flash back the phone.
Click to expand...
Click to collapse
Do yourself a favor and stay away from Youtube when your doing things like this. Most of them are clueless and have no idea what they are really doing.

zelendel said:
Do yourself a favor and stay away from Youtube when your doing things like this. Most of them are clueless and have no idea what they are really doing.
Click to expand...
Click to collapse
Yeah i know i do a mistake.....

Milo01 said:
I don't know any place to upload such a big file..
Click to expand...
Click to collapse
depositfiles.com

You are purloiner !!!

nesa67 said:
Upload backup and send link for experiments.
My phone is bricked and i want recovery
The true chip is MT6571
Click to expand...
Click to collapse
http://dfiles.eu/files/he6uhz52u

Milo01 said:
http://dfiles.eu/files/he6uhz52u
Click to expand...
Click to collapse
I try rename my scatter file to MT6571_Android_scatter, the process start but after 10,42 Mb (3%) i get error again.
Brom Error:
S_FT_NAND_READLEN_NOT_PAGE_ALIGMENT (4017)

Milo01 said:
I try rename my scatter file to MT6571_Android_scatter, the process start but after 10,42 Mb (3%) i get error again.
Brom Error:
S_FT_NAND_READLEN_NOT_PAGE_ALIGMENT (4017)
Click to expand...
Click to collapse
S_FT_NAND_READLEN_NOT_PAGE_ALIGMENT (4017)
Download or firmware upgrade?
Change version SP Flashtool
Upload pls full backup before mtk droitools. (or preloader)

hy
nesa67 said:
S_FT_NAND_READLEN_NOT_PAGE_ALIGMENT (4017)
Download or firmware upgrade?
Change version SP Flashtool
Upload pls full backup before mtk droitools. (or preloader)
Click to expand...
Click to collapse
hy , I`have this phone too , and i`try`d many flash tools ,but nothing hapens , my phone is hard brick , don`t open ,not charging , i`try to find only the right preloader ...this way i`don`t stop searching for the right rom ..., in this case when you see youre phone it`s not working with nothing ... you realy want to trowing at trash ... ( by the way sorry for my bag english ) ... i`will put some pictures with my phone ..., i`made him an autopsy ... to see the real cpu ... but the right rom ..deseapear ... or don`t exist ... perhaps are 3 hardware in one form of samsung galaxy s5 , but those 3 are not the same ...
Model SM-G900H
ANDROID VERSION 4.4.4
BASE VERSION
G900HXXU1ANCE ,THOSE are the onnly information that i have ,
Under the batery info are
MODEL SM0G900F FCC ID:A3SMG900F
SSN G900F GSMH
MADE IN VIETNAM BY SAMSUNG
END this are the info that i have from using MTKDroidTools are
Hardware : MT6589
Model : SM-G900H
Build number : ALPS.JB7.MP.V1.14
Build date UTC : 20141009-103734
Android v : 4.4.4
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V38, 2014/05/22 12:01
Kernel v : 3.4.39 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Thu Oct 9 18:35:13 CST 2014
I need help , what`s the real rom for this smartphone , please help ..., sorry for my bad english , ....
this is what is writed on my cpu
MT6571A
1438-EAHHDH
BTT4H997
ATP 13N44
i put the photo of cpu ...
and the MT6323GA the powercontroler IC
1435 - AGAH
CTGPS821
MEDIATEK
Please Help ... Thank You in Advance ...

aadryan2002 said:
MODEL SM0G900F FCC ID:A3SMG900F
SSN G900F GSMH
MADE IN VIETNAM BY SAMSUNG
END this are the info that i have from using MTKDroidTools are
Hardware : MT6589
Model : SM-G900H
Build number : ALPS.JB7.MP.V1.14
Build date UTC : 20141009-103734
Android v : 4.4.4
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V38, 2014/05/22 12:01
Kernel v : 3.4.39 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Thu Oct 9 18:35:13 CST 2014
I need help , what`s the real rom for this smartphone , please help ..., sorry for my bad english , ....
this is what is writed on my cpu
MT6571A
1438-EAHHDH
BTT4H997
ATP 13N44
.
Click to expand...
Click to collapse
Yes it is rom for your phone.

nesa67 said:
Yes it is rom for your phone.
Click to expand...
Click to collapse
I`am not realy sure about it ... id try` this rom , but it wont work , i`think i need the original preloader , because my phone is brick, and don`t charge , but my lap is dedecting by MTK USB PORT , so i`think is not dead , so i think that if i got the right preloader , i`coud manage this phone ... but i`dont have the right preloader ... and i`dont realy know if is this important the battery , my laptop detects the phone easily without battery , for about 14 ,18 sec, then for a sec ,go out ,and then connects again .... need a realy good advice .... ...and nesa thaks for reply ....

aadryan2002 said:
I`am not realy sure about it ... id try` this rom , but it wont work , i`think i need the original preloader , because my phone is brick, and don`t charge , but my lap is dedecting by MTK USB PORT , so i`think is not dead , so i think that if i got the right preloader , i`coud manage this phone ... but i`dont have the right preloader ... and i`dont realy know if is this important the battery , my laptop detects the phone easily without battery , for about 14 ,18 sec, then for a sec ,go out ,and then connects again .... need a realy good advice .... ...and nesa thaks for reply ....
Click to expand...
Click to collapse
hi. i have the same phone s5 clone. with the same specs.I tried to format mine. and managed but now to damn thing does not boot at all.I have the full backup.but sp tool just gives me an error s_ft_enable_dram_fail(4032).
I think what is in the backup and what is on the phone are different thing.could you upload youre backup please.

Yuuki1942 said:
hi. i have the same phone s5 clone. with the same specs.I tried to format mine. and managed but now to damn thing does not boot at all.I have the full backup.but sp tool just gives me an error s_ft_enable_dram_fail(4032).
I think what is in the backup and what is on the phone are different thing.could you upload youre backup please.
Click to expand...
Click to collapse
HY , i`cant ...sorry this is my problem , i dont have a backup made sorry ,if you can upload yours this way i can try youre backup on my phone , who knows ... and by the way , thats a memory error (4032) change the sp flash tool ...try first thist version SP_Flash_Tool_v3.1316.0.150 ,then with this one , SP_Flash_Tool_v3.1344.0.212 if not with this one SP_Flash_Tool_v5.1352.01 , if you see that it not change the name of the scater in 65xx with 6571 or 6572 ... and try with those sp flash that i mentioned ... sorry for my english ... i`hope you will succed

Related

[Q] How unbrick galaxy s3 mini clone mtk6575

I update the firmware of galaxy mini clone s3 "bp-i9300" bricked and he tried several firmwares but could not
using the SP TOOLS FLASH v3.12.06.01 clicked the flash format whole and want to know how to save my smartphone
Hardware : MT6575
Model : BP-I9300
Build number : ALPS.GB2.MP.V2.18
Build date UTC : 20121101-070530
Android v : 2.3.6
Baseband v: MAUI.11AMD.W11.50.SP.V28, 2012/09/05 17:06
Kernel v : 2.6.35.7 ([email protected])
(gcc version 4.4.3 (GCC) ) #1 Thu Nov 1 15:00:27 CST 2012
Uboot build v : MAIN2.2.ubt.3248
LCD Driver IC : 1-mhu3s_i9300_tianzhi_hx8357
=============== Memory Detection Report ===============
Internal RAM: Size = 0x00020000 (128KB)
External RAM: ERROR: External RAM was not detected!!
NAND Flash: Device ID = "[HYNIX] H9DA4GH4JJAMCR_4EM" (101)
Size = 0x20000000 (512MB/4096Mb)
EMMC : ERROR: EMMC was not detected!
============ RAM Test ============
SKIP! External RAM was not detected!
same problem
juniopms said:
I update the firmware of galaxy mini clone s3 "bp-i9300" bricked and he tried several firmwares but could not
using the SP TOOLS FLASH v3.12.06.01 clicked the flash format whole and want to know how to save my smartphone
Hardware : MT6575
Model : BP-I9300
Build number : ALPS.GB2.MP.V2.18
Build date UTC : 20121101-070530
Android v : 2.3.6
Baseband v: MAUI.11AMD.W11.50.SP.V28, 2012/09/05 17:06
Kernel v : 2.6.35.7 ([email protected])
(gcc version 4.4.3 (GCC) ) #1 Thu Nov 1 15:00:27 CST 2012
Uboot build v : MAIN2.2.ubt.3248
LCD Driver IC : 1-mhu3s_i9300_tianzhi_hx8357
=============== Memory Detection Report ===============
Internal RAM: Size = 0x00020000 (128KB)
External RAM: ERROR: External RAM was not detected!!
NAND Flash: Device ID = "[HYNIX] H9DA4GH4JJAMCR_4EM" (101)
Size = 0x20000000 (512MB/4096Mb)
EMMC : ERROR: EMMC was not detected!
============ RAM Test ============
SKIP! External RAM was not detected!
Click to expand...
Click to collapse
same problem here!
Solution
juniopms said:
I update the firmware of galaxy mini clone s3 "bp-i9300" bricked and he tried several firmwares but could not
using the SP TOOLS FLASH v3.12.06.01 clicked the flash format whole and want to know how to save my smartphone
Hardware : MT6575
Model : BP-I9300
Build number : ALPS.GB2.MP.V2.18
Build date UTC : 20121101-070530
Android v : 2.3.6
Baseband v: MAUI.11AMD.W11.50.SP.V28, 2012/09/05 17:06
Kernel v : 2.6.35.7 ([email protected])
(gcc version 4.4.3 (GCC) ) #1 Thu Nov 1 15:00:27 CST 2012
Uboot build v : MAIN2.2.ubt.3248
LCD Driver IC : 1-mhu3s_i9300_tianzhi_hx8357
=============== Memory Detection Report ===============
Internal RAM: Size = 0x00020000 (128KB)
External RAM: ERROR: External RAM was not detected!!
NAND Flash: Device ID = "[HYNIX] H9DA4GH4JJAMCR_4EM" (101)
Size = 0x20000000 (512MB/4096Mb)
EMMC : ERROR: EMMC was not detected!
============ RAM Test ============
SKIP! External RAM was not detected!
Click to expand...
Click to collapse
Hi there,
I had the same problem with my cloned S3 phone Quad Core MT6575. I accidentally updated the PRELOADER AND DSP_BL.. and phone become dead (NO BOOT) Situation. So what i did is. Take out the battery and unplug your device from the computer.
1) Open Smart Phone Flash Tool Version 3.1222.00
2) Select your model Scatter file and goto FORMAT tab and select "Format whole flash" Press OK.
3) Now it must be searching for the phone. Just DO NOT INSERT the BATTERY into the phone yet.
4) Connect the data cable to your phone and immediately press Volume + button and Power button.
5) You will hear hardware detection sound and the Red progress bar will start.
6) Once its complete it gives you BIG GREEN Circle, which means everything went well.
7) Now unplug your phone and Press F9 button (download mode, which you have selected scatter file in step number 2).
8) Connect your phone again and let the files rolling into your device until its complete and gives you BIG GREEN CIRCLE again.
9) Insert the battery back and turn on the phone . Congracts! you have successfully unbricked your phone.
10) By the way you can now go into recovery mode by rebooting your phone Volume down (minus) and Power Button you will see Android e3 Recovery mode :good:
Good luck
Puneet J.
>-Ni2->
need full backup for sp flashtool
ni2_opps said:
Hi there,
I had the same problem with my cloned S3 phone Quad Core MT6575. I accidentally updated the PRELOADER AND DSP_BL.. and phone become dead (NO BOOT) Situation. So what i did is. Take out the battery and unplug your device from the computer.
1) Open Smart Phone Flash Tool Version 3.1222.00
2) Select your model Scatter file and goto FORMAT tab and select "Format whole flash" Press OK.
3) Now it must be searching for the phone. Just DO NOT INSERT the BATTERY into the phone yet.
4) Connect the data cable to your phone and immediately press Volume + button and Power button.
5) You will hear hardware detection sound and the Red progress bar will start.
6) Once its complete it gives you BIG GREEN Circle, which means everything went well.
7) Now unplug your phone and Press F9 button (download mode, which you have selected scatter file in step number 2).
8) Connect your phone again and let the files rolling into your device until its complete and gives you BIG GREEN CIRCLE again.
9) Insert the battery back and turn on the phone . Congracts! you have successfully unbricked your phone.
10) By the way you can now go into recovery mode by rebooting your phone Volume down (minus) and Power Button you will see Android e3 Recovery mode :good:
Good luck
Puneet J.
>-Ni2->
Click to expand...
Click to collapse
hi, i had brick s3 mini clone mtk 6575 device. it's information as below.
i need full backup for flash tool to unbrick this phone. anyone help me please...
thanks a lot for now.
PS. my device use method to engineer mode as type *#112#*
Hardware : MT6575 (SAMSUNG is Fake!)
Model : GT-I8190
Build number : JRO03H.I8190XXALJL
Build date UTC : 20130515-123434
Android v : 2.3.3
Baseband v: MAUI.11AMD.W11.50.SP.V18.P2, 2012/10/10 18:37
Kernel v : 2.6.35.7 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 Wed May 15 20:31:03 CST 2013
Uboot build v : MAIN2.2.ubt.4115
LCD Driver IC : 1-0-nt35510_hvga_cpu_auto
=============== Memory Detection Report ===============
Internal RAM:
Size = 0x00020000 (128KB)
External RAM:
Type = DRAM
Size = 0x10000000 (256MB/2048Mb)
NAND Flash:
Device ID = "[HYNIX] H9DA4GH4JJAMCR_4EM" (102)
Size = 0x20000000 (512MB/4096Mb)
EMMC :
ERROR: EMMC was not detected!
any solution?
Do you now if there's a custome rom for this model,
Hardware : MT6575 (SAMSUNG is Fake!)
Model : GT-I8190
Build number : JRO03H.I8190XXALJL
Build date UTC : 20130625-122442
Android v : 2.3.3
Baseband v: MAUI.11AMD.W11.50.SP.V18.P2, 2012/10/10 18:37
Kernel v : 2.6.35.7 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 Tue Jun 25 20:21:08 CST 2013
Uboot build v : MAIN2.2.ubt.11006
Or any way to update the Android V:2.3.3 to any newone, please!!
regards!!
please help
hello...i have samsung s3 mini gt-i8190 mt6575 korea clone and after few tries to install custom rom for it i accidentally bricked it :crying:
now im trying to find the stock rom for it n i followed the steps in here but even worser (from softbrick to hardbrick)
can anyone pls help where can i find stock rom or custom rom that can be installed in this device?? been looking for days and weeks :crying:
aweeyz76 said:
hello...i have samsung s3 mini gt-i8190 mt6575 korea clone and after few tries to install custom rom for it i accidentally bricked it :crying:
now im trying to find the stock rom for it n i followed the steps in here but even worser (from softbrick to hardbrick)
can anyone pls help where can i find stock rom or custom rom that can be installed in this device?? been looking for days and weeks :crying:
Click to expand...
Click to collapse
If you want i can upload my rom backup, naybe it works for your cel.
Hardware : MT6575 (SAMSUNG is Fake!)
Model : GT-I8190
Build number : JRO03H.I8190XXALJL
Build date UTC : 20130625-122442
Android v : 2.3.3
Baseband v: MAUI.11AMD.W11.50.SP.V18.P2, 2012/10/10 18:37
Kernel v : 2.6.35.7 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 Tue Jun 25 20:21:08 CST 2013
regards
help help help
saintkamus said:
If you want i can upload my rom backup, naybe it works for your cel.
Hardware : MT6575 (SAMSUNG is Fake!)
Model : GT-I8190
Build number : JRO03H.I8190XXALJL
Build date UTC : 20130625-122442
Android v : 2.3.3
Baseband v: MAUI.11AMD.W11.50.SP.V18.P2, 2012/10/10 18:37
Kernel v : 2.6.35.7 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 Tue Jun 25 20:21:08 CST 2013
regards
Click to expand...
Click to collapse
I also need it too for my replica... I hope you can help us.. so many thanks.!
saintkamus said:
If you want i can upload my rom backup, naybe it works for your cel.
Hardware : MT6575 (SAMSUNG is Fake!)
Model : GT-I8190
Build number : JRO03H.I8190XXALJL
Build date UTC : 20130625-122442
Android v : 2.3.3
Baseband v: MAUI.11AMD.W11.50.SP.V18.P2, 2012/10/10 18:37
Kernel v : 2.6.35.7 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 Tue Jun 25 20:21:08 CST 2013
regards
Click to expand...
Click to collapse
can u pls upload it pls pls? i really need it...thanks in advance
p/s: my device is nand based memory not emmc
Hi, I just finish to backup my stock rom, I can't post the link here, but i will send by PM.
Hope this works for you!! i think that you just ned to open MTK Droid tools, "To prepare blocks to flash tools" into the "root, backup, recovery." submenu, then just use the SP flash to flash it with the scatter file created in MTK droid.
Regards.
will try it out
saintkamus said:
Hi, I just finish to backup my stock rom, I can't post the link here, but i will send by PM.
Hope this works for you!! i think that you just ned to open MTK Droid tools, "To prepare blocks to flash tools" into the "root, backup, recovery." submenu, then just use the SP flash to flash it with the scatter file created in MTK droid.
Regards.
Click to expand...
Click to collapse
thanks a lot dude...i'll try it out n reply here if it works or not...:good:
aweeyz76 said:
thanks a lot dude...i'll try it out n reply here if it works or not...:good:
Click to expand...
Click to collapse
Can someone send me that link too?
failed
aweeyz76 said:
thanks a lot dude...i'll try it out n reply here if it works or not...:good:
Click to expand...
Click to collapse
i did try to 'revive' my phone but nothing seems working
i got this error message from SP Flash Tool
BROM ERROR: S_DA_DRAM_NOT_SUPPORT (3004)
[H/W] The handset does not support DRAM. Please ask for help.
did try many times (dl with preloader n dsp bl selected, dl with both not selected) still got the same error message
btw my phone specs that i last know i almost like this
HARDWARE : MT6575 (MT6517 is FAKE)
MODEL : GT-I8190
ANDROID : 4.1.1
Kernel v : 2.6.35.7 ([email protected])
(gcc version 4.4.3 (GCC) ) #1 Thu Nov 1 15:00:27 CST 2012 **(i think its a bit different here but same kernel 2.6.35.7)**
=============== Memory Detection Report ===============
Internal RAM:
Size = 0x00020000 (128KB)
External RAM:
ERROR: External RAM was not detected!!
NAND Flash:
Device ID = "[TOSHIBA] TYBC0A111557KC" (114)
Size = 0x20000000 (512MB/4096Mb)
EMMC :
ERROR: EMMC was not detected!
been trying lots of methods n evrything to get it back to life but still failed...:crying::crying::crying:
aweeyz76 said:
i did try to 'revive' my phone but nothing seems working
i got this error message from SP Flash Tool
BROM ERROR: S_DA_DRAM_NOT_SUPPORT (3004)
[H/W] The handset does not support DRAM. Please ask for help.
did try many times (dl with preloader n dsp bl selected, dl with both not selected) still got the same error message
btw my phone specs that i last know i almost like this
HARDWARE : MT6575 (MT6517 is FAKE)
MODEL : GT-I8190
ANDROID : 4.1.1
Kernel v : 2.6.35.7 ([email protected])
(gcc version 4.4.3 (GCC) ) #1 Thu Nov 1 15:00:27 CST 2012 **(i think its a bit different here but same kernel 2.6.35.7)**
=============== Memory Detection Report ===============
Internal RAM:
Size = 0x00020000 (128KB)
External RAM:
ERROR: External RAM was not detected!!
NAND Flash:
Device ID = "[TOSHIBA] TYBC0A111557KC" (114)
Size = 0x20000000 (512MB/4096Mb)
EMMC :
ERROR: EMMC was not detected!
been trying lots of methods n evrything to get it back to life but still failed...:crying::crying::crying:
Click to expand...
Click to collapse
Yeah, me too, it is now 15 hours while i tried everything and nothing works ://
---------- Post added at 07:23 AM ---------- Previous post was at 07:19 AM ----------
Please whats pass for that site? (cannot send private message btw)
massofsin said:
Can someone send me that link too?
Click to expand...
Click to collapse
here's the link https://mega.co.nz/#!9dRmlTQa!Y2AVNFGJqw2F0B73NrgMXmAUvHR7H1S34EmKomt6CF4
aweeyz76 said:
here's the link https://mega.co.nz/#!9dRmlTQa!Y2AVNFGJqw2F0B73NrgMXmAUvHR7H1S34EmKomt6CF4
Click to expand...
Click to collapse
Nothing just errors ://
massofsin said:
Nothing just errors ://
Click to expand...
Click to collapse
duh still no progress here either:crying: just keep hoping that someone pro from the dev team will read this n help us out with this phone probs cuz been searching for days about this phone (GT-I8190 MT6575) here but seems only a few use em...mostly ppl talk about the big one (GT-I9300)
keep praying dude...:fingers-crossed:
:fingers-crossed::angel::crying:
massofsin said:
Yeah, me too, it is now 15 hours while i tried everything and nothing works ://
---------- Post added at 07:23 AM ---------- Previous post was at 07:19 AM ----------
Please whats pass for that site? (cannot send private message btw)
Click to expand...
Click to collapse
Hey guys do you have a backup from your version?? Android 4??
Regards

P8800 Android 7 inch mtk6572 chinese tablet

PLZ I need help to find a firmware for this tablet .. I searched every where .. even contacted the supplier of the product .. but according to them they don't have the firmware .. I don't know where else to go .. you guys are the top the tech world you are my last hope .. plz help me .. if I have other choice I will diffidently already chose it but I didn't find .. the company cheated me and many others like me .. notice this tablet is unbranded from alibaba.com and also souq.com ... PLZ PLZ PLZ PLZ PLZ ... I am desperate .. I beg you guys to help me ...:crying::crying::crying::crying::crying:
PLZ HELP HELP HELP ... DON'T Buy This It is not good
Please Help
I will be thankful for life .. I will do any thing you want from me if you help ... please help .. and when I said "Firmware" I meant Rom for flashing by SP Flash Tool ... My Device not even booting because I flashed wrong rom but I think If I find the correct rom I can flash it by SP Flash Tool that I got from this forum ... Please HELP FOR THE HUMANITY SAKE
P8800 tablet 7 inch
P8800 Android 7 inch mtk6572 chinese tablet
Helo MaxxiMillian....
backup is sending me to be able to prepare scatter update sp-flashtools
excuse my English
order to restore functional tablet you need original backup .... if you realize MTKDroidTools
I think i found it for you !
it is version v022
http://pan.baidu.com/s/1cgY7Q
use this to flash:http://www.bassoon.cc/UpLoadFiles/DownLoad/SP_Flash_Tool_exe_v3.1324.0.177.zip
worked for me ,good luck !!
Hello to all users of tablet / phone P8800 7inci.
Hardware info
Hardware : MT6572
Model : P8800
Build number : ALPS.JB3.MP.V1.12
Build date UTC : 20130929-121515
Android v : 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V8, 2013/09/10 20:24
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Sun Sep 29 20:13:51 CST 2013
Uboot build v : -----
LCD Driver IC : 1-hx8264d_rgb
I added a private ftp files containing images and writing methods of making backup flash contains all the necessary files and programs used also
files are available at ftp://109.99.143.214/usb1_1/
user: ftp
passwd: free
This ftp will work until the files will be posted to another address .... within one week
Emei please change the IMEI of your phone
THANKS
bwginfo said:
Hello to all users of tablet / phone P8800 7inci.
Hardware info
Hardware : MT6572
Model : P8800
Build number : ALPS.JB3.MP.V1.12
Build date UTC : 20130929-121515
Android v : 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V8, 2013/09/10 20:24
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Sun Sep 29 20:13:51 CST 2013
Uboot build v : -----
LCD Driver IC : 1-hx8264d_rgb
I added a private ftp files containing images and writing methods of making backup flash contains all the necessary files and programs used also
files are available at ftp://109.99.143.214/usb1_1/
user: ftp
passwd: free
This ftp will work until the files will be posted to another address .... within one week
Emei please change the IMEI of your phone
Click to expand...
Click to collapse
You can not believe how much tankful I am for what you did for me
You are the The AMAZING ONE Believe you are ... Thanks Alot
Please tell me if there is any thing I can do for you too
not for payback but for the god intention of assisting others like you did
Please tell me if there is any thing that I can assist with
THANKS
How can I give thanks here ..
THANKS ((stillbeer))
stillbeer said:
I think i found it for you !
it is version v022
http://pan.baidu.com/s/1cgY7Q
use this to flash:http://www.bassoon.cc/UpLoadFiles/DownLoad/SP_Flash_Tool_exe_v3.1324.0.177.zip
worked for me ,good luck !!
Click to expand...
Click to collapse
This one was for you sorry ...
You can not believe how much tankful I am for what you did for me
You are the The AMAZING ONE Believe you are ... Thanks Alot
Please tell me if there is any thing I can do for you too
not for payback but for the god intention of assisting others like you did
Please tell me if there is any thing that I can assist with
THANKS
How can I give thanks here ..
bwginfo said:
Hello to all users of tablet / phone P8800 7inci.
Hardware info
Hardware : MT6572
Model : P8800
Build number : ALPS.JB3.MP.V1.12
Build date UTC : 20130929-121515
Android v : 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V8, 2013/09/10 20:24
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Sun Sep 29 20:13:51 CST 2013
Uboot build v : -----
LCD Driver IC : 1-hx8264d_rgb
I added a private ftp files containing images and writing methods of making backup flash contains all the necessary files and programs used also
files are available at ftp://109.99.143.214/usb1_1/
user: ftp
passwd: free
This ftp will work until the files will be posted to another address .... within one week
Emei please change the IMEI of your phone
Click to expand...
Click to collapse
Thanks " bwginfo "
for the software the every thing you did to very nice of you
I am Thankful A :highfive::good::good::good::highfive::fingers-crossed::victory:lot
THANKS
Working Fine
Hello to all users of tablet / phone P8800 7inci.
Hardware info
Hardware : MT6572
Model : P8800
Build number : ALPS.JB3.MP.V1.12
Build date UTC : 20130929-121515
Android v : 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V8, 2013/09/10 20:24
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Sun Sep 29 20:13:51 CST 2013
Uboot build v : -----
LCD Driver IC : 1-hx8264d_rgb
Tehnical data:
Model P8800 Tablet PC
CPU MTK6572, dual core, 1.2GHz, GPU: Mali-400
Operation System Android 4.2.2
ROM 512MB
RAM(Memory) 256MB
Shell Material Plastic
Screen Size 7 Inch
Type Capacitive Screen
Display LED
Resolution 800 x 480px
Visible Angle 120°
​
Extend Card Support TF card up to 32GB extended
Camera Dual camera. Both are 2.0 megapixels
​ ​
Multi-Touch Yes, 5 points multi-touch
Band GSM 850/900/1800/1900 MHz
Play Store Yes, pre-installed
Bluetooth Yes, built in
GPS Yes
Video 1080P, AVI/MOV/MP4/RMVB/FLV/MKV…
Music MP3/WMA/WAV/APE/AAC/FLAC/OGG
Ebook UMD, TXT, PDF, HTML, RTF, FB2…
​ ​
Email and Browser Yes, built in
WIFI Yes, 802.11 b/g/n
3G Not built in, support external 3G dongle: E1916, ZTE AC2736, HUAWEI E1750, HUAWEI EC122, HUAWEI EM770W
Earphone Interface 3.5mm
​ ​
Battery 3650 MAh, 3.7V
​
Language Dutch, Indonesian, Catalan, Czech, Danish, German, English, Spanish, French, Croatian, Italian, Latvian, Lithuanian, Hungarian, Malay, Norwegian, Polish, Portuguese, Roman, Slovenian, Finnish, Swedish, Swahili, Vietnamese, Turkish, Zulu, Greek, Ukrainian, Russian, Serbian, Bulgarian, Hebrew, Arabic, Persian, Thai, Bengali, Korean, Japanese, Simplified Chinese, Traditional Chinese
Other Applications ES File Explorer , Google Search, Google Maps, Browser, Gallery, Clock, Market, Calculator, Calendar, Video, Email, Gmail…
Product Size 189 x 111 x 8mm(7.44 x 4.37 x 0.31 inch)
Product Weight 270g
Extend Port 1 x TF card slot, 2 x SIM card slot
1 x Micro USB port
1 x 3.5mm Earphone port
​
Package including 1 x Charger
1 x USB cable, 1 x Earphone
1 x Leather Case
Package Weight 575g
I added a files containing images and writing methods of making backup flash contains all the necessary files and programs used also
files are available at new adress link : ****no permision*****
new version update:
*****no permision*****
ftp address will be closed
All files needed for recovery were laid tablet/phone posted to another address
Please moderators allow only one item I can put the address of the new location ....
came the new version of software for these tablet .... P8800 V200
sure you will want to have this model and other tablet / phone to resolve any issues
Soft issues identified in this model P8800
version 0.21 GPS tracking errors or not working, wireless NVRAM Warning = 0x ... (original sotware product)
version 0.22 ok gps solved ; NVRAM Warning persistent (new update) using another method to solve this problem wirelless
version 200 NOT TESTED working (new update)
MaxxiMillian said:
This one was for you sorry ...
You can not believe how much tankful I am for what you did for me
You are the The AMAZING ONE Believe you are ... Thanks Alot
Please tell me if there is any thing I can do for you too
not for payback but for the god intention of assisting others like you did
Please tell me if there is any thing that I can assist with
THANKS
How can I give thanks here ..
Click to expand...
Click to collapse
I am glad tot be helpfull !
Just hit the Thanks button on the bottom left
V200 not able to flash
Don't know why ?
stillbeer said:
V200 not able to flash
Don't know why ?
Click to expand...
Click to collapse
P8800 V200 This version is for model P8800 with 4GB Flash ROM; 2Gb Rom,
can not be used for models with 1GB ROM, 512MB ROM. TESTED not OK wrong rom
If you want details on how to rewrite IMEI I will try to post how to rewrite if you are interested .... although something similar is already posted on the xda-developers but for another model phone and the software used is IMEI & SN Writer V1.5.3
IMEI & SN Writer V1.5.3 this software solves the problem of NVRAM ERROR = 0x0 ....
MAC address to be completed wirelless
P8800 /512Mb Rom/256Mb Ram/
sorry for the English I use Google Translate
bwginfo said:
P8800 V200 This version is for model P8800 with 4GB Flash ROM; 2Gb Rom,
can not be used for models with 1GB ROM, 512MB ROM. TESTED not OK wrong rom
If you want details on how to rewrite IMEI I will try to post how to rewrite if you are interested .... although something similar is already posted on the xda-developers but for another model phone and the software used is IMEI & SN Writer V1.5.3
IMEI & SN Writer V1.5.3 this software solves the problem of NVRAM ERROR = 0x0 ....
MAC address to be completed wirelless
P8800 /512Mb Rom/256Mb Ram/
sorry for the English I use Google Translate
Click to expand...
Click to collapse
oke thank you for your reply !
Write IMEI: / SN: / BT MAC: / WIFI MAC: solve NVRAM ERROR
Add
solution
- nvram error and edit imei
includes software
and scren image and database MTK6572
bwginfo said:
109.99.143.214/usb1_1/
user: ftp
passwd: free
Click to expand...
Click to collapse
I am sorry but i can not enter her, where can i dowload the firmware?
samo733792 said:
I am sorry but i can not enter her, where can i dowload the firmware?
Click to expand...
Click to collapse
ftp closed
new address : http://www.4shared.com/rar/f6NAvvcuce/P8800_recovery.htm
---------- Post added at 10:14 PM ---------- Previous post was at 10:04 PM ----------
samo733792 said:
I am sorry but i can not enter her, where can i dowload the firmware?
Click to expand...
Click to collapse
ftp closed
new address : http://www.4shared.com/rar/f6NAvvcuce/P8800_recovery.htm ....... http://www.4shared.com/rar/cj2fNWSiba/P8800_recovery_Capture_screen.htm
help with samsung app
I have a P8800 tablet also and I was hoping someone could tell me how to get Samsung app to be in English instead of chines' I have my languish set to English but the apps are under china or something when they start
Service manual P8800
Hi all
I attached service manual for P8800
circuit diagram for delicate situations when necessary change of electronic components and hardware diagnostics
Bassoon p8800 firmware
MaxxiMillian said:
Working Fine
Click to expand...
Click to collapse
Hey there !! Can you help me plz? I need it! I have one of those tablets i think it is the same. But i don't how to install the firmware... Please!

[Q] any one can help me please.... :( i'm stuck on flashing mtk6589t

help me please....step by step to resolved my problem....:crying:
i try to flashing my fake galaxy s4 with mtk6589t, 2gb ram, (but detected as mtk6572 by MTKdroidtools)...
i stuck on SP flash tools error code (4023) BROM ERROR: S_FT_ENABLE_DRAM_FAIL
i can flashing my fake S4....i have tried mtk6589 rom, mtk6572 rom its always fail with that error code....
A da BEAT said:
help me please....step by step to resolved my problem....:crying:
i try to flashing my fake galaxy s4 with mtk6589t, 2gb ram, (but detected as mtk6572 by MTKdroidtools)...
i stuck on SP flash tools error code (4023) BROM ERROR: S_FT_ENABLE_DRAM_FAIL
i can flashing my fake S4....i have tried mtk6589 rom, mtk6572 rom its always fail with that error code....
Click to expand...
Click to collapse
anyone can help me please??
A da BEAT said:
anyone can help me please??
Click to expand...
Click to collapse
now my phone can detect by MTKdroid tool....
but still dark LCD nothing can see...:crying:
here the detail from MTKdroid tool :
Hardware : MT6572
Model : GT-I9500
Build number : ALPS.JB3.MP.V1
Build date UTC : 20131009-034501
Android v : 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V1.P2, 2013/08/12 19:49
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Wed Oct 9 11:42:34 CST 2013
what should i do to make normal again....?
anone here can help me please......
Download flashtool for your device and scatter.txt for mt6572
By the way which rom you tried to flash?
Sent from my A11 using Tapatalk

s4 clone dram_failed error

hello guys once again an other newbie here i flash my s4 clone with wrong Rom and phone is almost dead but pc detect as mtk device i try to format and download again with sp flash tool but dram faied error i checked most of topic about dram_failed but cant fix my problem try most of scatter files from this forum but no success dram failed error before flashing in my phone that was a custome Rom with android version 4.4.4 chip mtk 6572 here is my hardware info from droid tool
Hardware : MT6589 fake 6572
Model : GT-I9500
Build number : ALPS.JB3.MP.V1.8
Build date UTC : 20140311-123446
Android v : 4.4.4
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V4, 2013/08/07 10:44
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Tue Mar 11 20:32:07 CST 2014
and i flash with LenovoS750_KitFlashOfficialROMwithCWM
phone dead now what to do how my phone alive again any chance or thids dead end
Please, wait for some time! Don't face the same fate as I did! I lost my 16000 ruppees s4 due to the same problem! Your place is needrom.com website. Just ask the web admin about your device.... Stop further destroying your phone.... Believe and trust my reply....
irfanjunaid said:
Please, wait for some time! Don't face the same fate as I did! I lost my 16000 ruppees s4 due to the same problem! Your place is needrom.com website. Just ask the web admin about your device.... Stop further destroying your phone.... Believe and trust my reply....
Click to expand...
Click to collapse
okay i will do as u said and thanks for reply

Mtk tablet test point

Hi to all.
Android tablet Quart
Hardware : MT6582 (MT8382 is Fake!)
Model : QP760DG
Build number : MT83X2_MR706_MR706Z1H1C2W1.2014071214
Build date UTC : 20140624-062419
Android v : 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V18, 2013/11/29 20:10
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Tue Jun 24 14:20:52 CST 2014
Uboot build v : -----
LCD Driver IC : 1-tf070mc124_dsi
I have made a big mistake trying to install wrong rom on the tablet and now it is bricked (no preloader vcom driver) , in device manager just shows "MTK USB PORT" so i belive that is not the port for flashing or anyitng to comuincate with DRAM. I tried couple of similar ROM-s with SP flash tool but it shows me error 4032. According to mainboard is "ELINK-MV706Z_V2" Can somebedy make a beckup for this device or tell me where are the test points to activate preloader, foundet some rom on baidu.com but i cant register form my country Macedonia. By the way i have made a beckup with MTK tools and i have beckup file with no extension on it callled "ROM_0" and dont know what to do whith this file. I will be very thankful to somebody who can help me with this problem.
anyone?
pass rom
my friend i need this rom, you help me please... pass link me
Have you got the firmware? I really need it....pls help...:crying:
reasson;650595Mtk tablet test point51 said:
anyone?
Click to expand...
Click to collapse
contact me on facebook lindley karuthasami i have solutions for this tablet

Categories

Resources