Hi.
I want to upgrade to the Lollipop builds from my m8. I am currently running the GPe 4.4.2 rom, and was wondering which firmware I should flash. Im looking at the sense 4.4.4 firmware and I was just wondering if I can flash any sense 4.4.4 firmware or will I have to get a specific one for the AT&T m8. Thanks in advance!
If your running GPE than your unlocked,CWM/TWRP,rooted so that's good.how about S-OFF?
As far as upgrades it all depends on how fast you want it.
at&t being on the low end of the list for receiving OTA's
Fully converting to GPE would ensure a faster update but will lack the Sense version lollipop look and feel.
Read around and become more familiar with what options you have
I already am s-off and know what the Gpe conversion does and how I will loose sense. But I was wondering on my main thread which file of the sense 4.4.4 firmware I should flash.
But thanks anyways
Masterguy635 said:
I already am s-off and know what the Gpe conversion does and how I will loose sense. But I was wondering on my main thread which file of the sense 4.4.4 firmware I should flash.
But thanks anyways
Click to expand...
Click to collapse
3.28.401.6 or .7 will work fine
No such thing as lost sense for good.you can go back from converted
Yeah I'm still trying to figure out how to back pedal to sense partition. There are a few different threads telling different things to do. From what I can understand to back pedal from gpe to sense. You just download 1.54, factory reset,flash custom recovery,flash ROM..
Is this firmware for the US Dev HTC One m8 or is it the international unlocked? Since the ATT M8 and the US Dev M8 have identical hardware, I just want to make sure I use the proper firmware.
jxcorex28 said:
Yeah I'm still trying to figure out how to back pedal to sense partition. There are a few different threads telling different things to do. From what I can understand to back pedal from gpe to sense. You just download 1.54, factory reset,flash custom recovery,flash ROM..
Click to expand...
Click to collapse
That's what it says but you need a computer
Correct..imo do not use euro firmware on an att device. Use the firmware made for the device your on. Here soon i dont think youll be able to interchange firmwares shortly with euro devices without causing major issues.
Masterguy635 said:
Is this firmware for the US Dev HTC One m8 or is it the international unlocked? Since the ATT M8 and the US Dev M8 have identical hardware, I just want to make sure I use the proper firmware.
Click to expand...
Click to collapse
So do you think the firmware version above will work with the AT&T M8 or should I be looking for another firmware?
There are 3.28.1540.5 firmware packages available for flashing. I would suggest using it or change cid and flash ruu3.28.1540.5 which will update you to latest firmware.Paramus Nj?
Masterguy635 said:
So do you think the firmware version above will work with the AT&T M8 or should I be looking for another firmware?
Click to expand...
Click to collapse
Wonders_Never_Cease said:
There are 3.28.1540.5 firmware packages available for flashing. I would suggest using it or change cid and flash ruu3.28.1540.5 which will update you to latest firmware.Paramus Nj?
Click to expand...
Click to collapse
So I attempted flashing the firmware that you reccommended but it says error
http://imgur.com/TKrF49K
Masterguy635 said:
So I attempted flashing the firmware that you reccommended but it says error
http://imgur.com/TKrF49K
Click to expand...
Click to collapse
You may have accidentally renamed the file firmware.zip.zip by having the file extensions hidden in Windows (it certainly looks that way from the screenshot of your file folder).
Did you change your cid? Looked at pics command should only be fastboot flash zip firmware.zip not all the other strings in the command.
Looks like its in a folder named adb so you should cd into that folder once there the command above should be entered.
Masterguy635 said:
So I attempted flashing the firmware that you reccommended but it says error
http://imgur.com/TKrF49K
Click to expand...
Click to collapse
Masterguy635 said:
So I attempted flashing the firmware that you reccommended but it says error
http://imgur.com/TKrF49K
Click to expand...
Click to collapse
Yes like @redpoint73 said .
Rename it to just "firmware" and use the full command again (don't change the command)
Thanks everyone for the help!
I succesfully flashed the firmware and flashed the SD Lollipop rom. Everything is working fine and I have encountered no issues.
Once again thanks for your help!
Masterguy635 said:
Thanks everyone for the help!
I succesfully flashed the firmware and flashed the SD Lollipop rom. Everything is working fine and I have encountered no issues.
Once again thanks for your help!
Click to expand...
Click to collapse
So was the issue solved by just renaming the file, or something else?
redpoint73 said:
So was the issue solved by just renaming the file, or something else?
Click to expand...
Click to collapse
Yeah.
Masterguy635 said:
Yeah.
Click to expand...
Click to collapse
Thanks. Its good to know what the solution was, so that we can use that knowledge to help others in the future. And to confirm that we have given you the correct advice.
redpoint73 said:
Thanks. Its good to know what the solution was, so that we can use that knowledge to help others in the future. And to confirm that we have given you the correct advice.
Click to expand...
Click to collapse
No Problem!
And I appreciate what you do for this fourm, so thanks again
Can anyone help in build 5.0 for xolo a500s
Sent from my A500s using XDA Free mobile app
Related
[Q] Is AT&T HTC one X+ 4.2 Rom Can Be installed on Unlocked On htc One x+(XL+) Telus(
Hi,
i bought my phone on ebay india. its currently having Android 4.1.1 and Sense 4.5. Is it possible Or anyone tried Updating AT&T Stock Firmware 4.2.x?
Thanks in Advance
Solution
manikumary said:
Hi,
i bought my phone on ebay india. its currently having Android 4.1.1 and Sense 4.5. Is it possible Or anyone tried Updating AT&T Stock Firmware 4.2.x?
Thanks in Advance
Click to expand...
Click to collapse
Dear,
I also buy TELUS HOX+ from Ebay i have update my phone to Android 4.2.2 with sense 5 using below links
need to root & custom recovery
http://forum.xda-developers.com/showthread.php?t=2140442
& for ROM
http://forum.xda-developers.com/showthread.php?t=2023889
prashant.lohar said:
Dear,
I also buy TELUS HOX+ from Ebay i have update my phone to Android 4.2.2 with sense 5 using below links
need to root & custom recovery
http://forum.xda-developers.com/showthread.php?t=2140442
& for ROM
http://forum.xda-developers.com/showthread.php?t=2023889
Click to expand...
Click to collapse
did you got blink feed?
manikumary said:
Hi,
i bought my phone on ebay india. its currently having Android 4.1.1 and Sense 4.5. Is it possible Or anyone tried Updating AT&T Stock Firmware 4.2.x?
Thanks in Advance
Click to expand...
Click to collapse
Friend, There is no STOCK Firmware update of 4.2.2 for At&t version of the phone yet..
THE ONLY OPTION FOR UPGRADE FOR YOU RIGHT NOW IS TO INSTALL A CUSTOM ROM ...
ethanon said:
Friend, There is no STOCK Firmware update of 4.2.2 for At&t version of the phone yet..
THE ONLY OPTION FOR UPGRADE FOR YOU RIGHT NOW IS TO INSTALL A CUSTOM ROM ...
Click to expand...
Click to collapse
Wrong, i really wish you would stop giving mis-information
http://forum.xda-developers.com/showthread.php?t=2467571
Lloir said:
Wrong, i really wish you would stop giving mis-information
http://forum.xda-developers.com/showthread.php?t=2467571
Click to expand...
Click to collapse
Lior, I am from India and I have both the version of the phone , I have received the update for enrc2b but for my At&t version I am yet to receive any update. Hope it drops some time soon , but the catch here is "NOW", I don't think we have it for OTA as of now. More over correct me if I am wrong we don't receive updates once we move out of the network .
Any way I do really appreciate all your hard work :good:
ethanon said:
Lior, I am from India and I have both the version of the phone , I have received the update for enrc2b but for my At&t version I am yet to receive any update. Hope it drops some time soon , but the catch here is "NOW", I don't think we have it for OTA as of now. More over correct me if I am wrong we don't receive updates once we move out of the network .
Any way I do really appreciate all your hard work :good:
Click to expand...
Click to collapse
But YOU CAN use the RUU for the AT&T device.
Lloir said:
But YOU CAN use the RUU for the AT&T device.
Click to expand...
Click to collapse
Sorry It just slipped my mind that the guy has SUPER CID and S-OFF, guess in that case he can flash the At&t RUU .
Thanks again Lloir ,
Lloir said:
Wrong, i really wish you would stop giving mis-information
http://forum.xda-developers.com/showthread.php?t=2467571
Click to expand...
Click to collapse
Except hTC temporarily removed the update off the website until they can fix it. The one linked on that thread will not update your phone, because it gives everyone a 158 error.
kusanagi-sama said:
Except hTC temporarily removed the update off the website until they can fix it. The one linked on that thread will not update your phone, because it gives everyone a 158 error.
Click to expand...
Click to collapse
Worked fine for my device
Lloir said:
Worked fine for my device
Click to expand...
Click to collapse
Ok, what did you do to get it to update? I RUUd the previous version thinking that it could get the new one to update, but that didn't work. So, basically, my phone is completely stock right now (I relocked the bootload before doing so, of course)
I have USB Debugging enabled, otherwise, it won't detect the phone if it isn't enabled. This new update calls our phone a PDA Phone and the first screen telling what it will do has like "asdasdffkdsgj" on it.
--EDIT--
You have the international version of the One X+, which has already had a proper update.
Just a heads up, the new OTA that At&t released has an updated bootloader.
VenomMOD said:
Just a heads up, the new OTA that At&t released has an updated bootloader.
Click to expand...
Click to collapse
Why didn't att just play nice and update to V3? Instead they update To V4 so I can't flip flop between t-mobile firmware and there's. Does root still work? On the other hand, I can flash Verizon firmware I guess.
Ph0nysk1nk said:
Why didn't att just play nice and update to V3? Instead they update To V4 so I can't flip flop between t-mobile firmware and there's. Does root still work? On the other hand, I can flash Verizon firmware I guess.
Click to expand...
Click to collapse
I haven't attempted rooting it, and I won't be. There might be a small chance that it may work but I'm not sure.
VenomMOD said:
I haven't attempted rooting it, and I won't be. There might be a small chance that it may work but I'm not sure.
Click to expand...
Click to collapse
Well ... if root doesn't work I know what my next firmware will be. (Tmobile)
I can't root, looks like it's back to the drawing board. It figures this happen as soon as I feel it necessary to root my device......
I advise everyone to not take any OTAs after the first August patch so you can still be able to root and flash roms. It isn't a problem for me since I wasn't planning on rooting this phone again anyways..
VenomMOD said:
I advise everyone to not take any OTAs after the first August patch so you can still be able to root and flash roms. It's sad to see this happen, but it isn't a problem for me since I wasn't planning on rooting this phone again anyways..
Click to expand...
Click to collapse
Pretty sure the eng boot will still work on the new BL, just no old ROMs. :^)
MFW just read those posts above me.
raremind said:
I can't root, looks like it's back to the drawing board. It figures this happen as soon as I feel it necessary to root my device......
Click to expand...
Click to collapse
Did you use the engboot root method?
SkyAttacksX said:
Pretty sure the eng boot will still work on the new BL, just no old ROMs. :^)
MFW just read those posts above me.
Click to expand...
Click to collapse
@raremind couldn't root on BL4. It's unfortunate how we can't root on API2, but if the developers are willing to find out a new way to gain root access on API2, then it wouldn't be the end of the world for anyone who wants the latest OTA but still want root.
Can someone post link to download latest update
sandeep.manugunta said:
Can someone post link to download latest update
Click to expand...
Click to collapse
I took the OTA to get the latest version, so unfortunately I don't have the actual firmware link.
Ph0nysk1nk said:
Why didn't att just play nice and update to V3? Instead they update To V4 so I can't flip flop between t-mobile firmware and there's. Does root still work? On the other hand, I can flash Verizon firmware I guess.
Click to expand...
Click to collapse
Tmobile also updated their firmware to V4 with the recent update from 9/27
http://www.sammobile.com/firmwares/database/SM-G930T/
I covered this here: http://forum.xda-developers.com/att-s7-edge/help/att-t-mobile-bootloader-version-t3473281
Can the U firmware still be flashed?
No, it cant.
joe3681 said:
Can the U firmware still be flashed?
No, it cant.
Click to expand...
Click to collapse
No one can until the U firmware is updated to bootloader 4.
VenomMOD said:
No one can until the U firmware is updated to bootloader 4.
Click to expand...
Click to collapse
Yeahhh, thought I'd give it a go
G930U firmware was just updated to API3 which has the incremented bootloader, so the individuals who updated to the latest AT&T firmware can use U firmware now. :victory:
EDIT: Here is @joe3681 's thread that has the download to the firmware.
http://forum.xda-developers.com/att...4api3-firmware-download-t3481159#post69147585
>Update: Links were taken down.
Tired of seeing the new update notification. Looking at upgrading my phone. Unfortunately, I don't install ROMs all the time, so I tend to forget the steps / applications needed to upgrade. I'm rooted, and bootloader is unlocked.
Can anyone help?
Take a screenshot of current t about phone under settings so we know which version you are running
http://forum.xda-developers.com/showthread.php?t=3487757
demkantor said:
Take a screenshot of current t about phone under settings so we know which version you are running
Click to expand...
Click to collapse
Hardware: LG-H901
Software: H90120e
Double0EK said:
http://forum.xda-developers.com/showthread.php?t=3487757
Click to expand...
Click to collapse
Thank you, I'll check it out.
Is the new update rootable?
dinggus said:
Hardware: LG-H901
Software: H90120e
Thank you, I'll check it out.
Is the new update rootable?
Click to expand...
Click to collapse
So there are now two newer versions out there, the latest only has an OTA no kdz, and if you flash it as is you will loose root
I suggest wait until there is a method to keep root and flash the latest, which I'm sure will be soon
demkantor said:
So there are now two newer versions out there, the latest only has an OTA no kdz, and if you flash it as is you will loose root
I suggest wait until there is a method to keep root and flash the latest, which I'm sure will be soon
Click to expand...
Click to collapse
Okay, thank you. I have the "j" version downloaded. The new one is "l" correct?
Last time I tried updating to the "j" version, LG Up wouldn't recognize my phone.
dinggus said:
Okay, thank you. I have the "j" version downloaded. The new one is "l" correct?
Last time I tried updating to the "j" version, LG Up wouldn't recognize my phone.
Click to expand...
Click to collapse
L is the latest, if you want to flash j right now feel free
There are two Roms by eliminater74 and one by andy_zahng
For any of these choice you do not need LGup, so long as you are previously rooted
Just flash firmware (part one) via TWRP
Then flash any of those three Roms via TWRP
Reboot,
You will have j rooted
But being i tend to recommend a full wipe i would say wait until the latest L is out in a flashable .zip, should be soon
demkantor said:
L is the latest, if you want to flash j right now feel free
There are two Roms by eliminater74 and one by andy_zahng
For any of these choice you do not need LGup, so long as you are previously rooted
Just flash firmware (part one) via TWRP
Then flash any of those three Roms via TWRP
Reboot,
You will have j rooted
But being i tend to recommend a full wipe i would say wait until the latest L is out in a flashable .zip, should be soon
Click to expand...
Click to collapse
Thank you. I'm rooted and using stock ROM right now. What ROM do you use?
Here is the latest Stock Nougat build for Harpia in TWRP flashable format.
This zip does not include gpt (partition table) or bootloader, so you can downgrade back to your official stock build without any issues.
Usage is simple:
Copy file to device storage
Reboot into TWRP
Flash zip
Profit!
Please remember to hit the "thanks" button if this file helps you!
NPIS26.48-43-2 (June 1st, 2018)
*Deprecated*
Credits:
Android
Lenovorola
@tal.aloni for SparseConverter posted here:
https://forum.xda-developers.com/showthread.php?t=2749797
@erfanoabdi for imgpatchtools posted here:
https://forum.xda-developers.com/an...ev-img-patch-tools-sdat2img-ota-zips-t3640308
@A.S._id for img repack tools posted here:
https://forum.xda-developers.com/showthread.php?t=2600364
@xpirt for sdat tools posted here:
https://forum.xda-developers.com/an.../how-to-conver-lollipop-dat-files-to-t2978952
Can you add for XT1602 Retail ? It would be useful to have it for that variant too.
Thanks!
add to XT1600 please, thankful
:angel:
Do you mean I can flash everything about India retail and then get the stock Nougat update?
proudlytm said:
Can you add for XT1602 Retail ? It would be useful to have it for that variant too.
Thanks!
Click to expand...
Click to collapse
The latest file I know of for XT1601/XT1602 is:
HARPIA_MPI24.241-15.3_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
It is already finished, just need to upload and post links.
If you know of a more recent build, please post the filename or build.prop.
Death_GM said:
add to XT1600 please, thankful
:angel:
Click to expand...
Click to collapse
I haven't heard of the XT1600 variant and have not seen any fastboot files for it. If there is one, please post the filename or build.prop.
facuarmo said:
Do you mean I can flash everything about India retail and then get the stock Nougat update?
Click to expand...
Click to collapse
The latest file I know of for India is:
HARPIA_RETASIA-RETIN_MPI24.241-2.33_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
I can do that one, but there is no nougat update for any harpia variant at the time of this post afaik.
If you know of a more recent build, please post the filename or build.prop.
Q9Nap said:
The latest file I know of for India is:
HARPIA_RETASIA-RETIN_MPI24.241-2.33_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
I can do that one, but there is no nougat update for any harpia variant at the time of this post afaik.
If you know of a more recent build, please post the filename or build.prop.
Click to expand...
Click to collapse
Oh, someone told me that he received the Nougat update a month ago on his harpia, sad joke lol.
Added Consumer Cellular, Amazon, US Cellular, and Verizon builds, as well as credits including links to the tools I used to create these files, enjoy!
Please harpia 1602 Europa
nick more said:
Please harpia 1602 Europa
Click to expand...
Click to collapse
Please read the op regarding build requests.
Just added MPI24.241-2.33, MPI24.241-2.43, MPI24.241-2.45, and MPIS24.241-15.3-7.
All known build numbers are now available
If you have/know of a build number not currently included, please post a request including the build number.
Enjoy!
Just wanted to give a huge thank you for posting these. I flashed one and it fixed my GPS issue so thank you so much.
One question, is there anywhere to see the release dates of each radio? I'm just curious the order of which is oldest and newest.
Thank you again.
I have a XT1603 (Brazil) with the build number MPIS24.241-15.3-7, if i flash the fastboot MPIS24.241-15.3-7 will work, right? And can you provide a link to the zip MPIS24.241-15.3-7 that i can flash with adb through PC?
Thanks @Q9Nap
BigNaes said:
Just wanted to give a huge thank you for posting these. I flashed one and it fixed my GPS issue so thank you so much.
One question, is there anywhere to see the release dates of each radio? I'm just curious the order of which is oldest and newest.
Thank you again.
Click to expand...
Click to collapse
You can use simg2img to unsparse the NON-HLOS.bin to NON-HLOS.raw, then use a hex editor to search for the date.
You can do the same with fsg, the other component of the radio, also; it is already unsparsed, so no need to use simg2img.
EmersonTR said:
I have a XT1603 (Brazil) with the build number MPIS24.241-15.3-7, if i flash the fastboot MPIS24.241-15.3-7 will work, right? And can you provide a link to the zip MPIS24.241-15.3-7 that i can flash with adb through PC?
Thanks @Q9Nap
Click to expand...
Click to collapse
Yes.
https://firmware.center/firmware/Motorola/Moto G4 Play/Stock/
https://mirrors.lolinet.com/firmware/moto/harpia/official/
Thanks again for the radios and for helping me check the dates! I have one more question which I can't seem to answer myself.
In the names of the radios, some start with MPI (example MPI24.241-15.3) while other radios begin with MPIS (example MPIS24.241-15.3-7). Do you know what this difference means? I have not been unable to find the meaning of this difference. Thanks again.
BigNaes said:
Thanks again for the radios and for helping me check the dates! I have one more question which I can't seem to answer myself.
In the names of the radios, some start with MPI (example MPI24.241-15.3) while other radios begin with MPIS (example MPIS24.241-15.3-7). Do you know what this difference means? I have not been unable to find the meaning of this difference. Thanks again.
Click to expand...
Click to collapse
I'm not sure what the difference is either, except that "MPIS" seems to be on the most recent builds.
Sorry for all the questions, but I do have another.
As I have been having constant GPS problems, I have been trying many of the radios to see if there is any solution or change to the issue. I havent found a solution yet.
I am curious if you think there is any danger or risk in flashing one of the amazon/verizon radios on a non-verizon or non-amazon phone? The baseband version is the same as my phone on stock the only difference being you have versions listed for Verizon and Amazon as well.
Thanks again for all the help.
@Q9Nap,
Thank you so much for these files.
Question:
Which one of the fastboot files is for the xt1607 U.S. Retail version?
Also, I have the xt1609 Verizon variant of the Moto G4 play. Can I flash the fastboot files for the xt1607 on my phone?
Since there are no gpt or bootloader files I'm wondering if it will work?
Thanks
BigNaes said:
Sorry for all the questions, but I do have another.
As I have been having constant GPS problems, I have been trying many of the radios to see if there is any solution or change to the issue. I havent found a solution yet.
I am curious if you think there is any danger or risk in flashing one of the amazon/verizon radios on a non-verizon or non-amazon phone? The baseband version is the same as my phone on stock the only difference being you have versions listed for Verizon and Amazon as well.
Thanks again for all the help.
Click to expand...
Click to collapse
The only difference between standard and verizon/amazon builds is the oem partition; everything else is the same.
So you could flash those radios, but the result wouldn't be any different.
classic757 said:
@Q9Nap,
Thank you so much for these files.
Question:
Which one of the fastboot files is for the xt1607 U.S. Retail version?
Also, I have the xt1609 Verizon variant of the Moto G4 play. Can I flash the fastboot files for the xt1607 on my phone?
Since there are no gpt or bootloader files I'm wondering if it will work?
Thanks
Click to expand...
Click to collapse
U.S. Retail UMTS: MPI24.241-2.35-1
U.S. Retail CDMA: MPI24.241-2.47, MPI24.241-2.50
If you've somehow managed to unlock the xt1609 bootloader, then yes you can use these files; afaik though, an unlock solution hasn't been released as of this writing.
I have flashed xt1609 files on my xt1607 successfully though, so it would work if the bootloader was unlocked.
Q9Nap said:
If you've somehow managed to unlock the xt1609 bootloader, then yes you can use these files; afaik though, an unlock solution hasn't been released as of this writing.
I have flashed xt1609 files on my xt1607 successfully though, so it would work if the bootloader was unlocked.
Click to expand...
Click to collapse
Thanks.
Unfortunately the xt1609 bootloader is not unlockable at the moment. (neither is there any root method for it. Bummer, huh?)
I just thought that the files could be flashed through adb fastboot as long as I didn't try to flash the bootloader and gpt, which are not included in these files, but apparently the bootloader would still need to be unlocked.
Close thread
Is there one for the S7 Active?
ThunderingLight said:
Is there one for the S7 Active?
Click to expand...
Click to collapse
Hasn't been found yet
Ok can you update the post once it has been found?
So, anyone flash this yet? I'm tempted but won't be back home to a PC (in case something goes wrong) until tonight. Just looking for some general impressions.
So, I did this. Pretty impressed with the overall device feel now, SE9 is nice . No hang ups other thank it took a long friggin' time, also remember this will WIPE all the data, so make sure to do a backup prior to. The initial/first phone setup is very iPhone-ish, imo.
bobloblaw1 said:
So, anyone flash this yet? I'm tempted but won't be back home to a PC (in case something goes wrong) until tonight. Just looking for some general impressions.
Click to expand...
Click to collapse
Be warned; this update is ONLY for SM-G930A firmware - it has a second-stage updater that blocks all other versions (including SM-G930T, which I myself tried). In other words, it is a carrier-specific update, folks.
PGHammer said:
Be warned; this update is ONLY for SM-G930A firmware - it has a second-stage updater that blocks all other versions (including SM-G930T, which I myself tried). In other words, it is a carrier-specific update, folks.
Click to expand...
Click to collapse
Will it work for sm-g930u at&t ????
mhdsweidan said:
Will it work for sm-g930u at&t ????
Click to expand...
Click to collapse
HIGHLY doubtful - not with a specific firmware check in place.
mhdsweidan said:
Will it work for sm-g930u at&t ????
Click to expand...
Click to collapse
You could try flashing G930A firmware in Odin and updating that way.
(Not sure it'll work though)
Sent from my SM-G955U using Tapatalk
If switching from u firmware back to att ql1 what version is capable of flashing att haven't been on carrier firmware since mm , wanna try Oreo
miko12312 said:
If switching from u firmware back to att ql1 what version is capable of flashing att haven't been on carrier firmware since mm , wanna try Oreo
Click to expand...
Click to collapse
What's your bootloader version? (5th from last letter in build number)
Sent from my SM-G955U using Tapatalk
FatalONEM8 said:
You could try flashing G930A firmware in Odin and updating that way.
(Not sure it'll work though)
Sent from my SM-G955U using Tapatalk
Click to expand...
Click to collapse
If it weren't for this being a daily driver, I'd consider it. However, because it is, that's not an option. So I'll have to wait for either a neutral version or one that will work with the SM-G930T.
I am currently testing it out, I was on the latest U firmware and downloaded the latest ATT firmware, will update on how it goes
**EDIT
I am getting a model mismatch trying to flash G930AUCS4BRA1 (full odin file) on to a G930UUES4BRA1 firmware
micallan_17 said:
I am currently testing it out, I was on the latest U firmware and downloaded the latest ATT firmware, will update on how it goes
**EDIT
I am getting a model mismatch trying to flash G930AUCS4BRA1 (full odin file) on to a G930UUES4BRA1 firmware
Click to expand...
Click to collapse
Try using PrinceComsy Odin
Sent from my SM-G955U using Tapatalk
oreo otas
Goodnight friends, I started to update my phone to version 8.0 but it has more than 30 min in the option of patchin system files is normal or my step to better life is my s7.
Excuse me for my English since it is not my native language.
spend the fright of my life but finally install now approve to see how it works on android 8.0
Just flashed updateon my s7 and now mywifi is not working anyone else having this issue?
Has anyone been able to successfully downgrade back to RA1 after sideloading 8.0?
chewis559 said:
Just flashed updateon my s7 and now mywifi is not working anyone else having this issue?
Click to expand...
Click to collapse
Just reboot in recovery mode and wipe cache
chewis559 said:
Just flashed updateon my s7 and now mywifi is not working anyone else having this issue?
Click to expand...
Click to collapse
I had the same issue. The recommendation of rebooting into recovery and wiping Cache works.
:good: