Hi guys,
I was testing other versions of ROM / Kernel in my device. Unfortunately it crushed and I want to reset it.
The problem is, I can't find KDZ or Stock Firmware + Original Kernel to get back to factory conditions. I can only find versions of Metro or D325n, but not for dual.
I tryed it either way but it didin't work. It stuck on LG boot screen. I suspect it caused due to the kernel of other version (metro)
Please, hope somebody can help me out. Thanks in advance.
PS: Found this but I think is not complete
https:// github com/AndroidAddict92/android_kernel_lge_w5ds
Details:
Device: LG L70 Dual (D325f8)
Recovery OK, No ADB.
EDIT:
Found in this site with IMEI (you can find it on the box, battery or dialing *#06# )
lg-firmware-rom.com/download-firmware.php?f=353494063393753
Related
trying to update my optimus one 503 through the LG pc suite , i just got the damn thing 2 weeks ago by the way from duabi , it went into emergency mode while connected , tried to switch it on after i got no response fomr it , all i get is the lg logo on a black bg , and stays that way till i disconnect the battery , now i'm in egypt and LG support center here never even heard of android phones , so any help guy ,
is it possible to install the p500 firmware onto my p503 or will there be implications
- anyone know how i can optain the LG firmware for LGp503
appreciate all suggestions
The only thing I can suggest to you is to look at this thread
Hope it will help.
thank's janeez , i'll give it a try and keep my fingers crossed , thanks you for sharing
jimmy_flash said:
trying to update my optimus one 503 through the LG pc suite , i just got the damn thing 2 weeks ago by the way from duabi , it went into emergency mode while connected , tried to switch it on after i got no response fomr it , all i get is the lg logo on a black bg , and stays that way till i disconnect the battery , now i'm in egypt and LG support center here never even heard of android phones , so any help guy ,
is it possible to install the p500 firmware onto my p503 or will there be implications
- anyone know how i can optain the LG firmware for LGp503
appreciate all suggestions
Click to expand...
Click to collapse
Take a look on getting firmware with help of serial number (bottom of main post), than you get firmware, which is 100% compatible (it should be because it comes from manufacturer). NOTE: When I check it last time, it doesn't work for me, so please report if it works or not.
Than you turn your phone into recovery and continue with steps mentioned in how-to which janez87 already mentioned.
Recovered Bricked P503
I bricked my Chinese P503 by attempting to install P500 Euro onto it.
Using the process from the suggested thread above I put back the out of box Chinese P503 and its alive again ... all be it in Chinese.
don't worry p500 is compatible with p503. mine was bricked too trying to upgrade thru lg update.
i just dowload an original p500 firmware and update my p503 using the steps posted in this forum.
Hello guys!
Does anybody have the H960YK model?
I really need the stock KDZ for this phone, searched google but did not find anything.
The problem is that my phone had operator firmware (V10A-425-02) and when I connected it to LG Bridge my phone updated to another firmware version (V10l-425-02) and now every time I reboot the phone I receive the next message when it boots:
" WARNING! current version is not available for user. Cant find matched cust for NT code mcc/mnc[42502], subset[ff]" What does it mean???
The Phone is working fine but the massage is annoying! I found that the massage somehow connected to the operator firmware but I dont know how to solve this, did not find any solution in the forums....
My device is not unlocked or rooted.
Please help!
Found this: How can I download the file? I tried to register but no success
http://forum.nationstandard.com/Firmware-669763-1-1.html
tainka said:
Hello guys!
Does anybody have the H960YK model?
I really need the stock KDZ for this phone, searched google but did not find anything.
The problem is that my phone had operator firmware (V10A-425-02) and when I connected it to LG Bridge my phone updated to another firmware version (V10l-425-02) and now every time I reboot the phone I receive the next message when it boots:
" WARNING! current version is not available for user. Cant find matched cust for NT code mcc/mnc[42502], subset[ff]" What does it mean???
The Phone is working fine but the massage is annoying! I found that the massage somehow connected to the operator firmware but I dont know how to solve this, did not find any solution in the forums....
My device is not unlocked or rooted.
Please help!
Found this: How can I download the file? I tried to register but no success
Click to expand...
Click to collapse
I'm Chinese, and this forum is a fake one, although they "claim" they have the firmware, actually there is nothing in there.
guys? any way to find the rom online? I searched everywhere and noting
Where did you get this version v10 from?
poczynek said:
Where did you get this version v10 from?
Click to expand...
Click to collapse
I live in Israel, this is the version imported here.
still need the rom. anyone?
I really need T-mobile KDZ file!!
H960YK - Israel (5.1.1)
V10b
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW78MQY2322XAPG8E56FTZM/H960YK10b_00.kdz
Hi, I'm wondering is there any way to debrand my lg g5 h850? When I start it up it always has the voadfone theme and pre installed vodafone apps. I have tried flashing open eu custom rom, but still no luck. Also I've tried to add new image for boot up menu but it still doesn't work. Please can someone help me?
Hey could you please help me figure out something. I have an LG V10 H901 (purchased from China) its supposedly the T-Mobile version but was manufactured in Korea. Its WIFI and bluetooth weren't working so I tried to update its firmware using LGUP. However, after the update it was hardbricked. I have managed to get to the LG logo using H90021w Unbrick Qfil files. Afterwards I tried to flash stock firmware H90130d_00_0611 using lgup. However, I got a message about partition changes and hardbrick once again. I have also tried KDZ files related to F600L, h90021w and many others. Can you please suggest based on my details:
-Correct QFIL files
-Correct Firmware or KDZ
Phone Details:
IMEI:354017070602111
Model:LGH901BK
Suffix:ATMOOP
Buyer:TMO
Software Verison:H90130D_00
OS Version:N
File Name:H90130d_00_0611.kdz
KDZ File size:1975399272
I had a similar problem, in the case I wanted to update do Nougat. After that I unbrick the phone. Try to install the H900 AT&T 6.0 MM firmware and it will became a H900 and go back to life. My H901 became a H900 AT&T. If only install the firmware doesn't work, then will need the Octopus to install.
wesley_fg said:
I had a similar problem, in the case I wanted to update do Nougat. After that I unbrick the phone. Try to install the H900 AT&T 6.0 MM firmware and it will became a H900 and go back to life. My H901 became a H900 AT&T. If only install the firmware doesn't work, then will need the Octopus to install.
Click to expand...
Click to collapse
Hello,
how did you flash the firmware from H900 to H901. I have exactly the same situation.
Can you help me?
uli15u said:
Hello,
how did you flash the firmware from H900 to H901. I have exactly the same situation.
Can you help me?
Click to expand...
Click to collapse
Try to flash the AT&T version firmware after You unbrick your Phone. If doesn't work, you'll have to use the Octopus Box to install the ROM in your V10.
wesley_fg said:
Try to flash the AT&T version firmware after You unbrick your Phone. If doesn't work, you'll have to use the Octopus Box to install the ROM in your V10.
Click to expand...
Click to collapse
is it possible to unlock the bootloader of AT&T h900 like t-mobile h901?. or can we install the modified boot.bin with 2 cores disabled?. will it work?.
I bought G8x (G850EMW) on flipkart sale(INV region) which came with Android 10 pre installed. I wanted to flash android 9 firmware but there is none for INV region.So I flashed android 9 IND region via LG up flash tool with the help of [email protected] guide. Flashing went smooth , phone booted up everything was working fine except there was no network. Now can anyone help me with a guide how to solve this issue if there is a solution?
I want to flash emw on my phone as well due to its dual sim support, but afraid of having same problem as yours, did you eventually got it to work?