Related
I've tried to install Cyanogenmod 9 on my Xperia Sola, I've unlocked bootloader official way, flashed kernel from this forum specialy made for sola (http://forum.xda-developers.com/showthread.php?p=28957468&postcount=412 This One), then boot.img of cyanogenmod 9 (FXP203) and...
When I want to do anything with phone, it just flashes my red led. I mean, that led is still on, when I press Power it just turn off. And when I try to connect my phone in fastboot mode, It don't react at all. Can I already throw it away through window?
I put it under a charger to see if it's just off energy, but i've noticed, that after a while, red led just turns off and that's all.
My god, help me or I'll be back on Nokia 3310
You've used the S kernel, not the Sola.
Download the FXP for Sola (Pepper) here;
http://forum.xda-developers.com/showthread.php?t=1876929
Flash boot.img via fastboot. To get in, hold vol up + power. Wait for 3 vibrations.
Hold vol up. Then jam the USB cable in. You should be in fastboot.
Alternatively, flash the stock sola ftf via flashboot.
Problem is, my phone does not react, it does not vibrate, just that red led is on or off. Nothing else. I've tried all of those combinations. I can't get to fastboot mode or anything else.
MelaPL said:
Problem is, my phone does not react, it does not vibrate, just that red led is on or off. Nothing else. I've tried all of those combinations. I can't get to fastboot mode or anything else.
Click to expand...
Click to collapse
Happened to me (I use Xperia GO). What I did is (as mentioned above) - Hold the power button and Volume Up button for sometime (it vibrates once after a few seconds, do not leave the buttons - continue to do so and after a few more seconds until 3 vibrations) and then the phone switches off. Now, hold the Volume Up button and plug in the USB cable - you'd be able to get in the fastboot mode. Flash a stock kernal and that should help.
If your phone is completely down (no charge at all), then above won't help. Plugin the charger and and wait for a few mins (before the red light goes off - you should now have a good knowledge on when the light goes off!) and try then try the above step. Once the 3 vibration comes, remove the charger and go ahead with the flash mode.
Hope this helps!
Thanks,
B.
Edit: By the way, I had my SIM Card and Memory card inserted in the phone when the phone was completely down without any charge. I don't know how, but it makes a difference with you try so (atleast in my case) with them.
If it does not vibrate, then it's a hard brick =\ You need the phone to be at least partially responsive to get into fastboot/flashboot.
Keep holding down. It should vibrate after 25 seconds or so.
Otherwise, you have to bring it to Sony and tell them their phone died on you.
Right now It dosen't even blink with Led. It's totaly down. I cant lock fbootloader, so I'm doomned. Hope that won't cost much...
Install Sony Update Service (SUS) and try to recover your phone from there.
Last shot here, but here's to hoping that the PC at least detects your phone.
Otherwise.... Yeah =\
If you unlocked your bootloader Pc companion will be useless for you cause it will not detect your phone,.,,
i think other way is to flash the stock ftf for you device using flashtool.... that wuld be the best shot for you...
please respond if this fix your problem
No, SUS will detect, but will refuse to flash. It will say "Phone has been modified".
Need to see whether it's a hard brick. If even SUS does not recognise, then bring it to Sony =\
None of the above works. It's just dead and sometimes flashes red light. PC Companion says that there's no phone connected. Hope I will be able to gain a varranty or I'll be on Nokia 3310. But I'm not verry cheerful about that...
Flashtool does not react when I plug in my phone in fastboot or flash.
Hey bro,
Its highly unlikely for hardbrick to happen to Sony phones by flashing a differnt Kernel when Flashtool is there Pretty sure that it ought to work, follow the steps below (Note that the order of usb cable connection is the most important thing as doing it wrong will not allow Flashtool to connect to the phone when its bricked ! )
First, try plugging it in to charger for a while to ensure that there's some charge. Follow up with the Vol and power Button to make sure its turned off. Then after that follow this procedure *exactly*
1) Prepare Flashtool and select the FTF. (Flashmode )
2) When flashtool asks yo to connect the phone, connect the USB cable to PC
3) Then, holding down ONLY the Vol Down button (No Power button, Note that ) connect the phone to the USB cable and in a few seconds, Flashtool will start flashing
I know you tried many variations but missing out on one or the other detail during your previous tries might have caused the lack of success Just try it and let us know what happens
Best of luck and hope you dont have to go to Nokia World !
Cheers
Nope, it's still not working. It just dosent detect phone. I'm pluging in, holding only volume key and I'm waiting 5 minutes - nothing happend.
Nokia 5530 for now, but come one...
Hi,
I am currently having the same problem (I have bricked my sola by flashing with fxp boot.img). After digging the internet I found out that you can start fastboot by:
1. holding all 3 buttons (power on, volume +, volume -)
2. the phone will vibrate
3. the phone will vibrate 3 times
4. release the buttons
5. hold the volume + button and plug in the cable
6. you should be in fastboot now (blue light on)
If fastboot does not work then do 1-4 3x. Good luck! Hopefully we will unbrick our phones
Br,
Wermesz
wermesz said:
Hi,
I am currently having the same problem (I have bricked my sola by flashing with fxp boot.img). After digging the internet I found out that you can start fastboot by:
1. holding all 3 buttons (power on, volume +, volume -)
2. the phone will vibrate
3. the phone will vibrate 3 times
4. release the buttons
5. hold the volume + button and plug in the cable
6. you should be in fastboot now (blue light on)
If fastboot does not work then do 1-4 3x. Good luck! Hopefully we will unbrick our phones
Br,
Wermesz
Click to expand...
Click to collapse
Lol things u get on the internet!!!
First there is no such key combination to start fastboot k so just dun break ur buttons in an attempt to start it ...
Steps 1,2&3 are steps to get ur device force restart and force shutdown and let me tell you one thing
step 1 is wrong it power button and volume + button. That's it first the phone will vibrate once for force restart and if u keep pressing it will bypass over to force shutdown which is indicated by 3 vibrations..
Sent from my Xperia Sola using xda premium
could work
I have a Xperia U and triying to port JB to it I briked two or three times.
I hold power botom and it vibrate and doesnt happen anything ok.?¿
The possible solution could be this(for my works)
Charge the phone like 1 hour for my doesnt charge with the animation but its for security.
With the nest steps you are going to lose all CWM and tweaks and apks but personal data still there.
You have two options:
Flash a new rom with flashtool, but when you pluged with volum - you hold it for allmost all process becose for my i conect to PC and its goes quikly so i cant do annything.
If the phone is not recognised by Flashtool:
You have to repair it with PC Companion or Bridge for Mac, and also the same hold volum - almost all process.
For my it works, tell my if for you works:cyclops::cyclops::cyclops:
Hi,
it worked !
after doing the steps I have posted earlier I managed to flash my xperia sola with the right boot.img (the one from fxp pepper) and install fxp via CWM. Should work for you too.
One tip: you have to remove the assert from fxp installation script.
Br,
Wermesz
@op, your battery is dead and isn't accepting any external charge. Try replacing your battery with a charged one. That is if sola supports user replaceable batteries.
Sent from my ST25i using xda app-developers app
Hey,
I have a problem. My tablet is SGP312 has Cyanogenmod 11 (FXP247 - Android 4.4). It was bricked when I type in Terminal:
Code:
su
reboot recovery
Was turned off and will not turn on at all.
Power button = NOTHING
Power button + Vol(+) 3/10/25 secs = NOTHING
Power button + Vol(-) 3/10/25 secs = NOTHING
Power button + Voll(+) + USB = NOTHING
No LED light, It's literally a paperweight. I can't even put it into Flashmode.
Please help me!
Anyone can help me?
WeRunTheNite said:
Anyone can help me?
Click to expand...
Click to collapse
Are you sure u can't put it in to flash mode, because that's the first thing I would do
Try putting it into fast boot mode
Hold volume up button and keep holding it and connect it to the pc
If you see blue light on your tablet, it means it has successfully entered fast boot mode
Make sure all the drivers are installed
Or
Follow the following procedures
Install Sony Ericsson flash tool and install all the drivers
Hold volume down button and keep holding it and connect it to pc
Once you hear the connecting sound our Any notification on your pc saying that it is connected, go ahead and flash the ftf file
hassanman1997 said:
Are you sure u can't put it in to flash mode, because that's the first thing I would do
Try putting it into fast boot mode
Hold volume up button and keep holding it and connect it to the pc
If you see blue light on your tablet, it means it has successfully entered fast boot mode
Make sure all the drivers are installed
Or
Follow the following procedures
Install Sony Ericsson flash tool and install all the drivers
Hold volume down button and keep holding it and connect it to pc
Once you hear the connecting sound our Any notification on your pc saying that it is connected, go ahead and flash the ftf file
Click to expand...
Click to collapse
When I hold volume up or volume down and connect it to PC, light turn on in red color. Flashtool says "device connected with usb debugging off" but tablet is off!
Driver
WeRunTheNite said:
When I hold volume up or volume down and connect it to PC, light turn on in red color. Flashtool says "device connected with usb debugging off" but tablet is off!
Click to expand...
Click to collapse
in my opinion, the drivers are not correctly installed
http://developer.sonymobile.com/downloads/drivers/xperia-tablet-z-sgp311-sgp312-driver/
go to the website and download and load the drivers on your pc
its just weird that it says device connected with Usb debugging off when it is actually powered off
try charging your device, maybe the battery needs to be charged leave it there for atleast 30 mins then try the steps
let us know if you fixed it or not
hassanman1997 said:
in my opinion, the drivers are not correctly installed
http://developer.sonymobile.com/downloads/drivers/xperia-tablet-z-sgp311-sgp312-driver/
go to the website and download and load the drivers on your pc
its just weird that it says device connected with Usb debugging off when it is actually powered off
try charging your device, maybe the battery needs to be charged leave it there for atleast 30 mins then try the steps
let us know if you fixed it or not
Click to expand...
Click to collapse
I have a similar problem, I've flashed plenty of devices before, never briked a thing.
By unloking the bootloader the data partition of my brand new tablet Z went corrupted. I've tried to flash several firmware but none was succesfull (couldn't format data...), and finally it get totally bricked! no light, nothing... I was not even able to put it in flash mode (no light ever!).
I've tried after a while, I've read with some other Xperia devices, it would be possible to recover it after some time, by letting the battery die, then use some rubber trick to keep vol- pressed... you can find it in XDA forums what I'm talking about. However after a month my tablet was still dead. no light, no nothing!
I've sent it to warranty and the just said that "an alternative firmware was flashed" (voiding the warranty) "and has rendered the logic board unusable".... and they have to order a new unit!!
I feel so surprise that even the cheapest chinese tablet have an harware mode that allow to reflash and resuscitate it back to factory... even if the firmware is completely screwed, and a 600$ tablet for a simple bootloader unlock got totaly bricked.
I wonder if there is an "hardware" way to recover the tablet (I saw it's pretty easy to tear down the Xperia tablet Z), by directly accessing the NAND... or by accessing some PIN (well I know sony would have not leaked such information)
Ok, hi guys... yesterday I misinterpreted some instructions before flashing Rajeev's PureX v4.1 rom... was on Niaboc79's ExistenZ Y v2.6.0... so went on, wiped and factory resetted... then, instead of formatting system/data, I formatted data AND system so obviously now it gets stuck at the Sony logo when booting because it has nothing to boot up and the only way to shut it off is with the small red button on the left side until it vibrates, resets then shuts off...
I then told myself I could simply flash a .FTF back from FlashTool, but alas, not this time... ok, I'm on D6503 Z2 with locked bootloader which is not unlockable... and now, when my phone's off and FlashTool asks to connect phone in flash mode the phone doesn't act as it normally would. when plugging usb cable, instead of the original green led, it quickly shows red, then green then nothing and on flashtool we can now see an error which is shown in the screenshot below.
Drivers are installed and I guess the problem now has to do with the bogus leds as they are the same just trying to connect in flash mode out of FlashTool... I Googled and read a lot about it yesterday on XDA and the only potential answer I could find was telling to flash a .ftf whrough FlashTool which was my first bet anyway but now, I really can't think of anything and would please appreciate your assistance about that... I hate to say this but I must admit what I'm requesting now is some help to get me through my own f*** up, please...
Might be a corrupt .ftf , try downloading another one or build your own with xperifirm+flashtool.
You can also try repairing with sony pc companion app...
Thanks for the quick answer... In fact I tested with 4 different ftfs I know are working... and as I said the problem is with the inability of phone to enter flash mode and its wrong leds when connecting to flash mode; not a software issue... I also tried with PCCompanion but it fails at detecting the phone since it freezes at the Sony logo and doesn't boot anything...
EDIT it also doesn't charge when I plug usb or ac. Instead it quickly toggles leds red, green, none one time and stays off... same way as when I try connecting it to flashmode holding vol-...
I've flashed many sony phones that don't boot / bootloop with flashtool and they always come to life again unless there's hardware problems
You phone is beeing detected in flashtool as beeing in flashmode so it's entering the correct mode. As a last resort i would try flashing on another pc/os , i still think it's pc related... are you using any android emulator on the pc? bluestacks / andy or that kind of stuff?
They cause loader.sin errors too... had that happen once on my work computer, uninstalled bluestacks and flashed fine afterwards.
Sorry i can't think of anything else right now...
I don't have another pc, but I reinstalled a pc backup so it is as when I originally set it up... reinstalled flashtool, reinstalled drivers and launched FlashTool to flash a .FTF. It just did the same as before flashes red, flashes green then nothing but the same errot message in FlashTool... but I noticed one thing, everytime I just plug phone to pc, Flashtool states it's in Flash mode as it is not. it was simply plugged in... and I don't use such as BlueStacks... and anyway the phone's leds react wrongly first then the asked action, flashing, cannot be applied hence the error message in FlashTool... thanx for your help...
I'm really used to flashing stuff and I know my mistake now was to format the system partition. From that time, it became impossible to flash any .ftf and the only info, signal I've got is the led quickly displaying red then green led intead of just green then starting to flash, when cable is plugged in, holding VOL-...
Damn formatting the system partition should not hard-brick your phone bro i've done exactly the same mistake on my also unlockable BL Z2 a long time ago, wiped everything and rebooted the phone without flashing the rom xD phone would only show sony logo (can't remember led status) but it flashed normally and came back to life. maybe you got really really unlucky and your bootloader got messed up somehow :| You already did everything i would have done without success, i'm also out of ideas... but xda is full of great minds, maybe someone else can help you better.
You are absolutely right... I had done the same mistake on my xperia T, a while back, and a simple flash from flashtool had taken care of it... I don'T even come to ask for help, usually... when I mess things up, I have always succeeded in bringing the thing back to life... until now...
thanx a lot for your help.
EDIT: Oh, even worse now... when flashtool is done preparing the FTF to be flashed and asks to plug in phone holding VOL-, I tried just plugging the phone WITHOUT holding any button and it did the exact same error I screenshotted earlier, with same red/green/none scheme... So computer really sonsiders phone to be in flashmode from the moment it's plugged in...
No problem, wish i could help more. It does seem like your phone is stuck on fastboot or flashmode. If you just power on the phone and connect it to pc (no flashtool running) does your pc device manager detect your phone? what device does it detect? If you connect in fastboot mode (vol up + plugin usb cable) what do you see in the device manager? Maybe try completely discharging your phone, leave it powered on for a day or so until the battery dies completely, maybe it'll "reset" to normal mode? Just throwing some ideas now, at least we're keeping the thread alive, maybe someone more expert will look at it too
Why you guys quoting every post? Makes it tedious scrolling on mobile.
@rubiicon59 old habits lol xD i edited my posts and removed the quotes, since no one else is participating in the thread they aren't really needed...
ptmaniac said:
No problem, wish i could help more. It does seem like your phone is stuck on fastboot or flashmode. If you just power on the phone and connect it to pc (no flashtool running) does your pc device manager detect your phone? what device does it detect? If you connect in fastboot mode (vol up + plugin usb cable) what do you see in the device manager? Maybe try completely discharging your phone, leave it powered on for a day or so until the battery dies completely, maybe it'll "reset" to normal mode? Just throwing some ideas now, at least we're keeping the thread alive, maybe someone more expert will look at it too
Click to expand...
Click to collapse
first, sorry for the late answer... ok,,, when I only plug usb cable into phone, it is not detected... However, I can boot into fastboot and then it's detected in device manager as in the screenshot below... But, it does flash red just before turning blue for fastboot... just the same quick red flash as when I plug USB in...
ptmaniac said:
No problem, wish i could help more. It does seem like your phone is stuck on fastboot or flashmode. If you just power on the phone and connect it to pc (no flashtool running) does your pc device manager detect your phone? what device does it detect? If you connect in fastboot mode (vol up + plugin usb cable) what do you see in the device manager? Maybe try completely discharging your phone, leave it powered on for a day or so until the battery dies completely, maybe it'll "reset" to normal mode? Just throwing some ideas now, at least we're keeping the thread alive, maybe someone more expert will look at it too
Click to expand...
Click to collapse
first, sorry for the late answer... ok,,, when I only plug usb cable into phone, it is not detected... However, I can boot into fastboot and then it's detected in device manager as in the screenshot below... But, it does flash red just before turning blue for fastboot... just the same quick red flash as when I plug USB in... it also doesn't charge when plugged in... no orange led... was at about 90% when it stopped working...
Just a quick tip- don't use the red button, it is only for emergency and it is annoying to open the flap everytime. Instead, use the Power + Volup and hold for a few seconds.
WOW! reallly can'T say why it didn't work first time, but I tried reinserting sd card and retake it out, started one last time to flash a .ftf and it worked.... Great, now back on my backup... everything working as it should now....
thanx to @BlAckXpeRia for the reminder tip... Red button should only be used when everything else failed to shut the phone down...
and of course, thanks to @ptmaniac for your help all along these stressful last 2 days... THANKS!!!
oh yeah, SOLVED
Nice!! i really really like this phone, i would be very sad if it died on me like that, good to hear you got your phone back
M having same issue without any SD card, what should I do ? :'(
my xperia device is stuck on the sony logo. wont pass that part. doesn't go into flashmode or fastboot, nothing. what can I do plz I need help. cant use flashmode on the pc as the computer never recognizes the phone bcuz it doesn't go into fastboot mode.
If your phone even starts, then fastboot and flashmode should work just fine. What's the last thing you did before it wouldn't boot?
1. Hold VOL UP while plugging it in the USB on your computer. The LED should get blue
2. Either use fastboot through command-line or use QuickIMG to boot a custom kernel with recovery.
3. Flash or restore a ROM
Klaos3000 said:
If your phone even starts, then fastboot and flashmode should work just fine. What's the last thing you did before it wouldn't boot?
1. Hold VOL UP while plugging it in the USB on your computer. The LED should get blue
2. Either use fastboot through command-line or use QuickIMG to boot a custom kernel with recovery.
3. Flash or restore a ROM
Click to expand...
Click to collapse
I was trying to unroot the phone to go back to stock and update to stock lollipop. the led lights don't light up anymore, holding volume up or down doesn't do anything as soon as I plug in the usb cable the screen comes on and it stays on the sony logo.
antrax360 said:
my xperia device is stuck on the sony logo. wont pass that part. doesn't go into flashmode or fastboot, nothing. what can I do plz I need help. cant use flashmode on the pc as the computer never recognizes the phone bcuz it doesn't go into fastboot mode.
Click to expand...
Click to collapse
Do the following exactly as outlined.
1- with the phone DISCONNECTED from your pc or charger, hold the power and up buttons until it vibrates and turns off.
2- open the flashtool and select an ftf to flash, and wait for the message that asks you to connect the phone in flash mode.
3- the phone must still be off. Hold the down button and connect the phone to the usb port in the pc. The flashing will start.
I tried that it goes back to the sony logo.
najoor said:
Do the following exactly as outlined.
1- with the phone DISCONNECTED from your pc or charger, hold the power and up buttons until it vibrates and turns off.
2- open the flashtool and select an ftf to flash, and wait for the message that asks you to connect the phone in flash mode.
3- the phone must still be off. Hold the down button and connect the phone to the usb port in the pc. The flashing will start.
Click to expand...
Click to collapse
I tried that. Doesnt work
antrax360 said:
I was trying to unroot the phone to go back to stock and update to stock lollipop. the led lights don't light up anymore, holding volume up or down doesn't do anything as soon as I plug in the usb cable the screen comes on and it stays on the sony logo.
Click to expand...
Click to collapse
How did you try to unroot? It's weird if you don't have working fastboot or flashmode, and without those, you're pretty much screwed. Those two should work even if you screw up big-time, like flashing a wrong kernel, but you must have done something weird if they stopped working?
And let me get this straight, you are pressing and HOLDING the volume buttons when you plug it to your computer, right? Make sure that the device is completely off by pressing and holding POWER + VOL UP. It'll vibrate a couple of times. Note that you're not supposed to be connected to the computer, since it'll then just boot again.
Then press and HOLD VOL UP for fastboot (blue LED), OR VOL DOWN for flashmode (green LED flashing shortly)
You probably already know these steps, but we have to make it absolutely certain that it's a hardware issue, and not an issue with the thing you do
Klaos3000 said:
How did you try to unroot? It's weird if you don't have working fastboot or flashmode, and without those, you're pretty much screwed. Those two should work even if you screw up big-time, like flashing a wrong kernel, but you must have done something weird if they stopped working?
And let me get this straight, you are pressing and HOLDING the volume buttons when you plug it to your computer, right? Make sure that the device is completely off by pressing and holding POWER + VOL UP. It'll vibrate a couple of times. Note that you're not supposed to be connected to the computer, since it'll then just boot again.
Then press and HOLD VOL UP for fastboot (blue LED), OR VOL DOWN for flashmode (green LED flashing shortly)
You probably already know these steps, but we have to make it absolutely certain that it's a hardware issue, and not an issue with the thing you do
Click to expand...
Click to collapse
I was going to flash the stock rom using flashtool right but everytime i tried to put the phone into fastboot mode it would go to the battery icon. At this point the phone was working fine. But no fastboot mode at all. Then i factory erased the phone through twrp. After that it doesnt boot up. Just sony logo no led lights. Even if i do vol up or down. Straight to the sony logo. Vol up plus power button, vibrates couple of times. I redo the process and it goes back to the sony logo.
antrax360 said:
I was going to flash the stock rom using flashtool right but everytime i tried to put the phone into fastboot mode it would go to the battery icon. At this point the phone was working fine. But no fastboot mode at all. Then i factory erased the phone through twrp. After that it doesnt boot up. Just sony logo no led lights. Even if i do vol up or down. Straight to the sony logo. Vol up plus power button, vibrates couple of times. I redo the process and it goes back to the sony logo.
Click to expand...
Click to collapse
The thing is that the screen shouldn't power on when you enter fastboot. The only thing that should go on is the blue LED. I don't use TWRP, and I don't know how it wipes stuff and if it only deletes user data, or if it formats the system. If it does the latter, then it literally wipes the system partition, making it empty, so if you ever format the system, you should flash a new ROM ASAP. A little late for that now though, but I'm still not convinced that fastboot isn't working.
ONE LAST TIME :laugh:
NOTE: The device should be disconnected from the computer.
1. Turn the device OFF by holding and pressing the POWER button and VOL UP. It should be disconnected from the computer by now. Got it? Nice.
2. Plug the USB-cable in the device first, since it's easier to plug it into the computer. Do not plug it into the computer yet. Only the Ultra.
3. Now HOLD VOL UP. Just hold it in.
4. Stick the USB cable, which is already inside your Ultra, to your computer WHILE still holding VOL UP.
5. The blue LED above the screen should light up now. The display should not power on or anything else. The blue LED is the only thing that should turn on.
Still nothing?
Klaos3000 said:
The thing is that the screen shouldn't power on when you enter fastboot. The only thing that should go on is the blue LED. I don't use TWRP, and I don't know how it wipes stuff and if it only deletes user data, or if it formats the system. If it does the latter, then it literally wipes the system partition, making it empty, so if you ever format the system, you should flash a new ROM ASAP. A little late for that now though, but I'm still not convinced that fastboot isn't working.
ONE LAST TIME :laugh:
NOTE: The device should be disconnected from the computer.
1. Turn the device OFF by holding and pressing the POWER button and VOL UP. It should be disconnected from the computer by now. Got it? Nice.
2. Plug the USB-cable in the device first, since it's easier to plug it into the computer. Do not plug it into the computer yet. Only the Ultra.
3. Now HOLD VOL UP. Just hold it in.
4. Stick the USB cable, which is already inside your Ultra, to your computer WHILE still holding VOL UP.
5. The blue LED above the screen should light up now. The display should not power on or anything else. The blue LED is the only thing that should turn on.
Still nothing?
Click to expand...
Click to collapse
I have windows 8. I remember i had a hard time trying to get it into fastboot first time i rooted and unlocked bootloader. Just dont remember what i did to get it working.
antrax360 said:
I have windows 8. I remember i had a hard time trying to get it into fastboot first time i rooted and unlocked bootloader. Just dont remember what i did to get it working.
Click to expand...
Click to collapse
Check whether the drivers have been properly installed in ur PC. If u can't get into flashmode try another system to flash the ftf. Procedure hold volume down while connecting the usb to plug. U will see a green led blink.
antrax360 said:
I have windows 8. I remember i had a hard time trying to get it into fastboot first time i rooted and unlocked bootloader. Just dont remember what i did to get it working.
Click to expand...
Click to collapse
Oh! You probably haven't installed fastboot on your computer. Download and install, and try again.
Klaos3000 said:
Oh! You probably haven't installed fastboot on your computer. Download and install, and try again.
Click to expand...
Click to collapse
Wooooohoooo phones alive jajaja. Thankssss. Though i got some more questions. First time i unlocked boatloader i was told to backup my TA files. what do i do with those now? I just flashed a stock c6806 unbranded rom. When i try to update the phone through settings it says it couldn't verify the update. i retried the process through sony companion app, and it says my phone is modded so it wont do anything.
antrax360 said:
Wooooohoooo phones alive jajaja. Thankssss. Though i got some more questions. First time i unlocked boatloader i was told to backup my TA files. what do i do with those now? I just flashed a stock c6806 unbranded rom. When i try to update the phone through settings it says it couldn't verify the update. i retried the process through sony companion app, and it says my phone is modded so it wont do anything.
Click to expand...
Click to collapse
The TA partition is where your DRM keys are. It's a good idea to backup those keys in case you want to revert to complete stock in the future, or when you need to send it in for repairs. Unlocking the bootloader will remove the keys, but since your device was - weirdly enough, already bootloader unlocked, I don't think you even had DRM keys to start with, which is again, very weird.
No biggie though. Gone is gone. The reason why PC Companion told you that it's been modified, is because you're rooted, and it knows it, so you'll have to unroot before you update. That's only if you're updating through official channels, but you have a second alternative; Flashtool. It allows you to flash stock Sony ROMs, or FTF-files.
But you're saying that you flashed a stock 6806 ROM now, and that's what? 5.0.2? Why don't you just download the .368-update (Android 5.1.1)? Then you'll be on the latest version.
Klaos3000 said:
The TA partition is where your DRM keys are. It's a good idea to backup those keys in case you want to revert to complete stock in the future, or when you need to send it in for repairs. Unlocking the bootloader will remove the keys, but since your device was - weirdly enough, already bootloader unlocked, I don't think you even had DRM keys to start with, which is again, very weird.
No biggie though. Gone is gone. The reason why PC Companion told you that it's been modified, is because you're rooted, and it knows it, so you'll have to unroot before you update. That's only if you're updating through official channels, but you have a second alternative; Flashtool. It allows you to flash stock Sony ROMs, or FTF-files.
But you're saying that you flashed a stock 6806 ROM now, and that's what? 5.0.2? Why don't you just download the .368-update (Android 5.1.1)? Then you'll be on the latest version.
Click to expand...
Click to collapse
I did unlock bootloader myself, TA file were backup. My phone is the 6806 model. The only ftf file i found on xda with a working link was for 4.2 jellybean. I just restored my TA files am going to reflash that stock rom and see what it says now.
antrax360 said:
I did unlock bootloader myself, TA file were backup. My phone is the 6806 model. The only ftf file i found on xda with a working link was for 4.2 jellybean. I just restored my TA files am going to reflash that stock rom and see what it says now.
Click to expand...
Click to collapse
Well carry on then! :laugh:
Klaos3000 said:
Well carry on then! :laugh:
Click to expand...
Click to collapse
Ill keep you posted thanks for replying though i really appreciate that.
Klaos3000 said:
Well carry on then! :laugh:
Click to expand...
Click to collapse
Phones fixed. I needed to restore my TA files in order to be fully stock. Thanks guys.
antrax360 said:
Phones fixed. I needed to restore my TA files in order to be fully stock. Thanks guys.
Click to expand...
Click to collapse
Nice!
Klaos3000 said:
Nice!
Click to expand...
Click to collapse
have my xperia z ultra same error that file will solve i dont know if my sony has unlock bootloader,
usually when i mess this phone up i am able to use the companion to flash it back to stock. i tryed to flash magisk and now the light flashes when plugged into a power source and the phone does not turn on at all. if i hold volume up while turning on it boots into fastboot mode because i see the blue light and i was able to use flashtool and its fastboot tools to flash system.sin from stock firmware but that has not made a difference. i have tried to get it into download mode(upgrade mode) by holding volume down but it continues to boot loop. if the device is not plugged into power and i hold volume down and power it boots into recovery and i click both safe mode and factory reset but both turn the device off. any ideas?
ths is far from beeig bricked. go into twrp recovery and flash new rom. this should work.
It is just a dead mobile
TjNiko said:
ths is far from beeig bricked. go into twrp recovery and flash new rom. this should work.
Click to expand...
Click to collapse
mine is not doing anything but it only boots into fastboot mode.
my device : Z3v D6708
rooted
no twrp is able to accessed.
dead body which blinks red+green LED when plugged in....and shows a blue light in fastboot.
Inside the SD card / SIM card slot is a small orange or red button, press with a tooth pick or a pin untill you feel vibration and then try to reflash.
a recovery shouzld be aways present at fota my friend.
rockinroller said:
Inside the SD card / SIM card slot is a small orange or red button, press with a tooth pick or a pin untill you feel vibration and then try to reflash.
Click to expand...
Click to collapse
i held the button in the sim card slot until the phone vibrated but what's next? i tried the companion and flashtool but the only thing it lets me do is flash the system, which does not fix my problem still, what is that button?
TjNiko said:
a recovery shouzld be aways present at fota my friend.
Click to expand...
Click to collapse
the only recovery available is the stock one that says power off, safe mode, continue boot, factory reset... none of them do anything....this device does have a locked bootloader, it uses a recovery like many motorola's do... its a software recovery so its gone lol
You should be able to use flash tool to flash the proper ftf file for your device. That is what you are trying to do right?
rockinroller said:
You should be able to use flash tool to flash the proper ftf file for your device. That is what you are trying to do right?
Click to expand...
Click to collapse
yes, every time i try it asks to put the device is upgrade mode, which it can not do at the moment
logan71f100 said:
yes, every time i try it asks to put the device is upgrade mode, which it can not do at the moment
Click to expand...
Click to collapse
So, if you hit the flash button on flashtool, tick the flashmode and after preparing it asks you to power off your phone and plug your USB cable into your computer and then press the volume button "down" while plugging in the USB cable to your phone, It should enter flashmode and start a automated flash. This is not working?
rockinroller said:
So, if you hit the flash button on flashtool, tick the flashmode and after preparing it asks you to power off your phone and plug your USB cable into your computer and then press the volume button "down" while plugging in the USB cable to your phone, It should enter flashmode and start a automated flash. This is not working?
Click to expand...
Click to collapse
nope thats my problem, i only can access flashmode, when plugged in it just bootloops, it only goes into flash mode via the blue light
logan71f100 said:
nope thats my problem, i only can access flashmode, when plugged in it just bootloops, it only goes into flash mode via the blue light
Click to expand...
Click to collapse
I'm not understanding how it is bootlooping. Your phone should be off (power off) when holding down the volume button and plugging in the USB. Is your phone powering on at this point to bootloop? If so you might have hardware problems Is all I can think of.
rockinroller said:
I'm not understanding how it is bootlooping. Your phone should be off (power off) when holding down the volume button and plugging in the USB. Is your phone powering on at this point to bootloop? If so you might have hardware problems Is all I can think of.
Click to expand...
Click to collapse
the phone started bootlooping after flashing that zip. so that rules out hardware, and when i say boot loop i mean lights flash screen stays dark..im trying to figure out if there's a fancy way to fix this through fastboot
depends on wich ftf was used before and bootloader some of them can enter flashmode just by put on the otg cable
It was running 5.1.1 and it boots into fastboot when I hold volume up, but just lights and virbates when holding down for upgrade mode
Same problem. z3v, accidentally flashed a wrong firmware zip via TWRP.
Now if I push the power button, nothing happens.
A long push causes a short vibration and nothing else.
Yellow rest button does not change anything either.
If I connect it to the PC, the following happens: Red led lights up briefly, phone vibrates, green led lights up briefly; whole sequence cycles after that. Now the only thing I can do from there is hold volume up for a couple of seconds, then the phone enters fastboot mode. Blue led lights up continuously. Flashtool sees the phone in Fastboot mode.
However, where to go from here, I cannot see. Any advise?
I had this problem once. It might be your usb cable try a brand new one that rated for data also not just charging. I was trying to root my phone at work and it wouldnt work and when I got home I tried a different usb cable and it worked.,
s300pmu1 said:
Same problem. z3v, accidentally flashed a wrong firmware zip via TWRP.
Now if I push the power button, nothing happens.
A long push causes a short vibration and nothing else.
Yellow rest button does not change anything either.
If I connect it to the PC, the following happens: Red led lights up briefly, phone vibrates, green led lights up briefly; whole sequence cycles after that. Now the only thing I can do from there is hold volume up for a couple of seconds, then the phone enters fastboot mode. Blue led lights up continuously. Flashtool sees the phone in Fastboot mode.
However, where to go from here, I cannot see. Any advise?
Click to expand...
Click to collapse
I am no closer than when I posted this, until there is a bootloader unlock witch in theory can be done through fastboot, we are s.o.l.
logan71f100 said:
I am no closer than when I posted this, until there is a bootloader unlock witch in theory can be done through fastboot, we are s.o.l.
Click to expand...
Click to collapse
aaa,It's very easy.you can use flashtool to flash a new system. but you must be in green light.only it.you also can be flash.sure,if your phone can't get into system,it only loop at"SONY".You touch the power and the volume up and down. keep 7s. then the phone will get into 3E RECOVERY,you chosed power down.and then the phonwill be power off. Now you can flash you phone.
If you phone can't get into green light.you can use the tool Z3X easy tool to save your phone.or it will be a brick.
my phone cant be start.it have became a brick. Good luck
s300pmu1 said:
Same problem. z3v, accidentally flashed a wrong firmware zip via TWRP.
Now if I push the power button, nothing happens.
A long push causes a short vibration and nothing else.
Yellow rest button does not change anything either.
If I connect it to the PC, the following happens: Red led lights up briefly, phone vibrates, green led lights up briefly; whole sequence cycles after that. Now the only thing I can do from there is hold volume up for a couple of seconds, then the phone enters fastboot mode. Blue led lights up continuously. Flashtool sees the phone in Fastboot mode.
However, where to go from here, I cannot see. Any advise?
Click to expand...
Click to collapse
I have same problem if you resolve it please help