Related
Hello,
about 2 hours ago I decided that I would unlock my device (before that I read maximum informations that I could). Unlocking went fine and I also installed TWRP 2.1.3 (through ViperMod). So far so good.
Then I made backup in TWRP in case something goes wrong. I was going to try AOKP v40 so I downloaded it via goo manager and then I flashed it in TWRP Install option (and also installed gapps) and wiped cache. Device rebooted and I was stuck at AOKP boot animation for about 15 minutes when I decided to recover back. So I rebooted, restored and rebooted.
Now I'm stuck at first boot logo (eee pad). When I try to do VolDown+Power to get into recovery it doesn't ask for VolUp, but goes straight to selection of Wipe or USB. When I select fastboot or wait 10 secs device frozes. (I haven't tried wipe, just in case it would be needed to unbrick).
I read thread about unbricking (http://forum.xda-developers.com/showthread.php?t=1514088) and to me it seems like option 3, but I don't see recovery option.
In device manager I have 'ASUS Fastboot Interface'.
Here's video how it looks like: http://www.youtube.com/watch?v=7BGd1PIVbn8
Please please could anyone help me?
Btw: Is there any chance to shut down? Holding power button just resets, so does pinhole... :/
qery said:
Hello,
about 2 hours ago I decided that I would unlock my device (before that I read maximum informations that I could). Unlocking went fine and I also installed TWRP 2.1.3 (through ViperMod). So far so good.
Then I made backup in TWRP in case something goes wrong. I was going to try AOKP v40 so I downloaded it via goo manager and then I flashed it in TWRP Install option (and also installed gapps) and wiped cache. Device rebooted and I was stuck at AOKP boot animation for about 15 minutes when I decided to recover back. So I rebooted, restored and rebooted.
Now I'm stuck at first boot logo (eee pad). When I try to do VolUp+Power to get into recovery it doesn't ask for VolUp, but goes straight to selection of Wipe or USB. When I select fastboot or wait 10 secs device frozes. (I haven't tried wipe, just in case it would be needed to unbrick).
I read thread about unbricking (http://forum.xda-developers.com/showthread.php?t=1514088) and to me it seems like option 3, but I don't see recovery option.
In device manager I have 'ASUS Fastboot Interface'.
Here's video how it looks like: http://www.youtube.com/watch?v=7BGd1PIVbn8
Please please could anyone help me?
Btw: Is there any chance to shut down? Holding power button just resets, so does pinhole... :/
Click to expand...
Click to collapse
Shouldn't it be volume and power down to get to the option to press volume up for recovery?
Are you familiar with fastboot flashing recoveries? Either way that will be helpful info for us to have.
Most important thing, this is no big deal at all, it's really a minor issue. Don't let yourself get stressed out over it, the community will make sure you're good to go.
CharliesTheMan said:
Shouldn't it be volume and power down to get to the option to press volume up for recovery?
Click to expand...
Click to collapse
Yes sure my bad, it was typo (I was kinda sleepy and tired when I was writing)
CharliesTheMan said:
Are you familiar with fastboot flashing recoveries? Either way that will be helpful info for us to have.
Click to expand...
Click to collapse
Nope, this is my first time flashing.
You say you dont see the VOL_UP message. From the video it looks like it is there. You just did not press it within 5 seconds.
Once it comes up, let go of the buttons ;p
leppie said:
You say you dont see the VOL_UP message. From the video it looks like it is there. You just did not press it within 5 seconds.
Once it comes up, let go of the buttons ;p
Click to expand...
Click to collapse
nope it's not there. I was holding voldown from the start and as soon as it should say 'press volup for recovery' (time 0:04) it jumps (skips 5 seconds of waiting) directly to wipe/fastboot options (wipe is one that is selected on video)
Ok so I managed to fix my problem thanks to hanzo001's thread (http://forum.xda-developers.com/showthread.php?t=1662158). Someone should add this instructions to the [HOW-TO] Unbrick your Transformer Prime (or not) thread.
qery said:
Ok so I managed to fix my problem thanks to hanzo001's thread (http://forum.xda-developers.com/showthread.php?t=1662158). Someone should add this instructions to the [HOW-TO] Unbrick your Transformer Prime (or not) thread.
Click to expand...
Click to collapse
glad it's fixed, im sure hanzo001 will appriciate a simple thanks on his thread too..and let others know it worked for you
I doesn't want to start..... Only shows battery icon when charging.
if you connect tab in pc usb,your pc recognize it?
Digital @ 961 Tablet Stuck in Boot Loop
vedran.cvetkovic said:
if you connect tab in pc usb,your pc recognize it?
Click to expand...
Click to collapse
I am experiencing the same problem...i believe they call it a boot loop where the start up screen never dissappears to bring you into the actual op. system. Is the only answer to download new firmware or is there a hard/factory reset that does the trick? FYI My computer doesnt recognize the device even when plugged into my mac via usb cable. I tried all I could find on key combos and unlocks for resetting the device but none of them worked. This is the second time this has happened. The first time was an easy factory reset fix pressing both the volume + button and the power key (or was it the volume -? I cant quite remember) for 15 seconds then wiping cache and data and restoring to factory defaults. Why is this same action not working this time when performed in the same way as I did when I fixed it the first time?
Please help, anyone, if you can.
Thank you.
It sounds like you might have tampered with the rom, or something you downloaded tampered with it. That's the only way I can think of as to why the factory reset would not be working. Other than that, potential hardware damage is possible. Before I help, I need to know what model of Digital2 tablet you're using. If you still need help with it, that is.
Hello everybody,
I bought the Nabi 2, as refurbished, for my little child and from the beginning I am having problems to turn it on or wake it up from sleep. It is not rooted, has everything stock and I have also applied all available official updates (OTA).
The problem is to turn it on, both from sleep or from powered down state. For example, being in sleep mode (display off) for a few hours, to wake it up I have first to press the power button for about 10 seconds, than release it and press again until... the start up Logo appears, as it was completely shut down! Maybe through pushing the power button first time I turn it off unintentional, so the second time it has to power up and load the OS? But just pushing the power button shortly will not wake it up at all from sleep mode... Is this a known problem and is there a solution for it?
Thanks in advance for each advice!
Conrad
Conrad-007 said:
Hello everybody,
I bought the Nabi 2, as refurbished, for my little child and from the beginning I am having problems to turn it on or wake it up from sleep. It is not rooted, has everything stock and I have also applied all available official updates (OTA).
The problem is to turn it on, both from sleep or from powered down state. For example, being in sleep mode (display off) for a few hours, to wake it up I have first to press the power button for about 10 seconds, than release it and press again until... the start up Logo appears, as it was completely shut down! Maybe through pushing the power button first time I turn it off unintentional, so the second time it has to power up and load the OS? But just pushing the power button shortly will not wake it up at all from sleep mode... Is this a known problem and is there a solution for it?
Thanks in advance for each advice!
Conrad
Click to expand...
Click to collapse
The only semi known issue I have seen is when you put the tablet to sleep and it's charging. In some instances the tablet will lock up at some point after going to sleep. When you try to wake in up via power button it is locked up. When you hold the power button for 10sec you are hard powering it off and then it reboots. If yours wasn't charging then I haven't read much about anyone having a similar problem.
aicjofs said:
The only semi known issue I have seen is when you put the tablet to sleep and it's charging. In some instances the tablet will lock up at some point after going to sleep. When you try to wake in up via power button it is locked up. When you hold the power button for 10sec you are hard powering it off and then it reboots. If yours wasn't charging then I haven't read much about anyone having a similar problem.
Click to expand...
Click to collapse
Thanks for your reply, aicjofs.
In my case it happens always, no matter if charging or not... and it's annoying.
Would rooting and installing a custom ROM solve the problem? If yes, is there a custom ROM dedicated to kids, similar with the stock one?
Conrad
Wrong Section Buddy !!!
StariX37 said:
Wrong Section Buddy !!!
Click to expand...
Click to collapse
and why ???
StariX37 said:
Wrong Section Buddy !!!
Click to expand...
Click to collapse
:thumbdown:
Ignore this guy. I have a friend with the same power on issue with her Nabi 2, and I'm interested to read the solution here.
...no other hints concerning my problem ?
Please, if somebody has an idea, just reply here.
Conrad-007 said:
...no other hints concerning my problem ?
Please, if somebody has an idea, just reply here.
Click to expand...
Click to collapse
I'm still struggling with the random problems on my Nabi...
Is it possible to check the integrity and/or health of internal memory, find and mark bad blocks, etc. using a computer (Windows or Linux) connected through USB? If yes, how? Do I need to flash TWRP or something else on the Nabi before?
Thanks in advance for your help.
Conrad
Conrad-007 said:
I'm still struggling with the random problems on my Nabi...
Is it possible to check the integrity and/or health of internal memory, find and mark bad blocks, etc. using a computer (Windows or Linux) connected through USB? If yes, how? Do I need to flash TWRP or something else on the Nabi before?
Thanks in advance for your help.
Conrad
Click to expand...
Click to collapse
The latest TWRP should have a section under the wipe menu where you can repair the file system which is probably easiest, although you need to be careful what you are doing in there as it is called the "wipe" tab for a reason. Should be able to go to wipe menu, select data partition checkbox, select change or repair filesystem(don't swipe to wipe, click the words check/repair etc) and select check in the next screen.
To do a filesystem check the partition can not be mounted so you do it from recovery not in Android. Since stock recovery you can't use ADB you pretty much need TWRP one way or another.
If you don't want to use the graphical interface in TWRP you can do it over USB with ADB and use e2fsck on the partitions after unmounting them, but it's going to be doing the same thing you will just see a more verbose version if you do it over adb.
Thanks a lot, aicjofs.
I will try to root and install first TWRP, as my Nabi is still untouched.
One thing I remarked: at the moment, when I go in the (stock) recovery and want to do a "Wipe data/factory reset", 2 lines are displayed before "-- Wipping data...": "E: missing bitmap stage_empty (Code -l)" and "E:missing bitmap stage_fill (Code -l)". After that, the wiping process seems to run normal, as I get the message "Data wipe complete." at the end.
Do you know what that lines are meaning? Could those lines help to debug the main problem ?
Update: NO WAY to get TWRP on my Nabi, regardless how hard I try...
NabiLab 2015 recognize the Nabi without problems, but as soon as I select "Recovery installer", Nabi should reboot-bootloader (I suppose), but hangs at Nabi Logo (the small icon in the middel of screen) forever. Also in Control Panel, the device is shown as ""Fastboot" with the error symbol and the indication that the driver should be installed again (but of course, when I try to do it, Windows tells me that the newest drivers for that device are already installed).
I also tried with using directly adb in a cmd window, with the same result, as soon as I type "adb reboot-bootloader" and press enter.
I am really out of ideas...
Conrad-007 said:
Update: NO WAY to get TWRP on my Nabi, regardless how hard I try...
NabiLab 2015 recognize the Nabi without problems, but as soon as I select "Recovery installer", Nabi should reboot-bootloader (I suppose), but hangs at Nabi Logo (the small icon in the middel of screen) forever. Also in Control Panel, the device is shown as ""Fastboot" with the error symbol and the indication that the driver should be installed again (but of course, when I try to do it, Windows tells me that the newest drivers for that device are already installed).
I also tried with using directly adb in a cmd window, with the same result, as soon as I type "adb reboot-bootloader" and press enter.
I am really out of ideas...
Click to expand...
Click to collapse
The hang with Nabi logo is because the fastboot driver is somehow broke. You will likely have to install it manually. Which driver are you using?
I gave most of the driver options here http://forum.xda-developers.com/nabi-2/general/nabi-information-t3229119
aicjofs said:
The hang with Nabi logo is because the fastboot driver is somehow broke. You will likely have to install it manually. Which driver are you using?
I gave most of the driver options here http://forum.xda-developers.com/nabi-2/general/nabi-information-t3229119
Click to expand...
Click to collapse
You were right! I've installed the "nacked" driver on a fresh windows 7 and now I have TWRP on my Nabi 2!!! Thanks a lot!!!
Now is there a way to get rid of the freezing problem when I attach the charger while Nabi is on? Right now, if I attach the charger this way, Nabi 2 will freeze completely and only a reboot can get the normal functionality back!?!
Charging the Nabi in "off" state works however...
Conrad-007 said:
You were right! I've installed the "nacked" driver on a fresh windows 7 and now I have TWRP on my Nabi 2!!! Thanks a lot!!!
Now is there a way to get rid of the freezing problem when I attach the charger while Nabi is on? Right now, if I attach the charger this way, Nabi 2 will freeze completely and only a reboot can get the normal functionality back!?!
Charging the Nabi in "off" state works however...
Click to expand...
Click to collapse
I dont have Nabi2's anymore but both my kids tablets did the same thing. I never really found a solution. I did buy a cable from Nabi store that has the orange braid covering. It seemed to make a difference, but it still happened from time to time.
Happy New Year!
As I mentioned, I was finally able to install TWRP and did all wiping, cleaning, repairing tasks that were available
After that I flashed the "Nabixus 0.1beta for Nabi 2" ROM which worked very nice.
But... I still have the same problems starting up the Nabi!
When I finally succeed to start it (after many trials), it works well, but if I let it go in standby and wait more that a few minutes, I am not able to wake it up again and I have to do a restart (about 10 sec. hold the Power button down).
What I`m not getting at all: is this a software or a hardware problem? Can my Nabi 2 be repaired after all, or I just have to scrap it?
The last thing I could still think to try would be to repair the partition table through TWRP / Adb / Adb shell. Should I try it? Where can I get a good partition table for my NV7A and, after having it, which commands are required?
... aicjofs, please... help
Conrad-007 said:
Happy New Year!
As I mentioned, I was finally able to install TWRP and did all wiping, cleaning, repairing tasks that were available
After that I flashed the "Nabixus 0.1beta for Nabi 2" ROM which worked very nice.
But... I still have the same problems starting up the Nabi!
When I finally succeed to start it (after many trials), it works well, but if I let it go in standby and wait more that a few minutes, I am not able to wake it up again and I have to do a restart (about 10 sec. hold the Power button down).
What I`m not getting at all: is this a software or a hardware problem? Can my Nabi 2 be repaired after all, or I just have to scrap it?
The last thing I could still think to try would be to repair the partition table through TWRP / Adb / Adb shell. Should I try it? Where can I get a good partition table for my NV7A and, after having it, which commands are required?
Click to expand...
Click to collapse
You can't repair the partition table from adb/TWRP. It's read only. You could through nvflash but I don't think the partition table could possibly cause the issue. I think you are meaning fix super blocks and inodes of the filesystem? Even that is a stretch if it's happening how you describe it but with a try. Did you try repair filesystem like we talked about earlier? If not backup all the data and try a wipe data. That will make sure to blow away and reformat the data partition.
It could be hardware. I know for sure the charging system causes it when plugged in but not about the first boot stuff or when it's not charging.
Thank you aicjofs for your answer,
yes, I did attempt to repair the system, data, cache and it was successfully. I did it several times. I also wiped everything a few times and installed the Nabixus ROM afterwards. Nothing helped. It's like the operating system needs to "get warm" somehow, because I have to try to power on the system many times, until I get it work... but after that, if the Nabi goes in standby, I have to start the whole thing over
How can I check for damaged blocks, etc.? If I can do it and find some, could they be marked as "bad" and isolated? Would it make sense?
Hopefully someone can help me, my child has a Pendo Pad 7 Model no.PNDPP44QC7 with Kitkat 4.4 and it ended up with lots of malware/viruses and barely usable. This tablet only has a power button and no other buttons so I did not know how to boot into recovery mode to do factory reset and after trying reset through settings which made no difference so I gave the device ROOT access so I could try and delete the malware etc but of course i did not do any sort of backup and did not add CWM or TWRP recovery. I ended up deleting something wrong and now the device just hangs on the Pendo logo screen. I have since worked out how to boot into Recovery Mode and also Fastboot mode now but a bit too late I tried to do a wipe data/factory reset and this made no difference still hangs on Pendo logo.
I can't seem to find a CWM or TWRP image file to suit the tablet and possibly try putting tablet into fastboot mode and using ADB on computer and flash the recovery to tablet. ???
in recovery mode options i get are
apply update from ADB
apply update from sdcard
apply update from cache
wipe data/factory reset
wipe cache partition
backup user data
restore user data
but i can not seem to find any correct files to work with this tablet any help to get this tablet working again would be much appreciated Thanks
Good day! how did you manage to boot into Recovery Mode or Fast Mode?
After pressing the power button and seeing the display turn on. Keep spamming the power button and a menu will pop-up on screen with boot options. Short press of the power button cycles through the options, long press selects the option.
Mine was also stuck on a boot loop, even though I had not played around with any settings or tried to root etc. I was able to revive it by going into recovery mode and doing a factory reset.
Hey OP I've got hold of the same tablet I'm working on getting a rom dump atm. Bare with me I'll try and send a link for the img. If u can get into recovery mode where u can update zip. That's good if not try and via pc. Once u have a link to the tablets boatloader, rest is history.
Hi,
Wondering if I can follow up on this.
Mine is stuck on the PENDO boot screen, and I have tried the reset button, as well as the se commands PENDO suggested....
1. Press On/Off Switch (Power), wait for the Pendo Logo start up screen, and then press On/Off Switch (Power) twice right away.
2. Factory mode menu comes out after 10 seconds, two fingers touches panel together to move to select the one like the following picture shows (no need to understand the Chinese words, just follow through as what the picture shows)
3. Press On/Off Switch (Power) and the following picture below will show, press On/Off Switch (Power) again to proceed on Recovery Mode, and wait for system to restart.
Unfortunately, nothing still happens.
ADB will not reveal what device it is, nor will Win 10 recognise the device for it to show in Device Manager or connected devices.
Windows responds with a ding ding, but nothing shows up.
I am stuck, and any info gladly accepted.
Thanks
bump please
ozviewer said:
Hi,
Wondering if I can follow up on this.
Mine is stuck on the PENDO boot screen, and I have tried the reset button, as well as the se commands PENDO suggested....
1. Press On/Off Switch (Power), wait for the Pendo Logo start up screen, and then press On/Off Switch (Power) twice right away.
2. Factory mode menu comes out after 10 seconds, two fingers touches panel together to move to select the one like the following picture shows (no need to understand the Chinese words, just follow through as what the picture shows)
3. Press On/Off Switch (Power) and the following picture below will show, press On/Off Switch (Power) again to proceed on Recovery Mode, and wait for system to restart.
Unfortunately, nothing still happens.
ADB will not reveal what device it is, nor will Win 10 recognise the device for it to show in Device Manager or connected devices.
Windows responds with a ding ding, but nothing shows up.
I am stuck, and any info gladly accepted.
Thanks
Click to expand...
Click to collapse
not working in my pendotab window 8
Hi,
I could get no further with mine, the same as you.
I contacted Pendo Support, and explained it would work but not boot, I even asked for the image file so I could reload it in recovery mode, however, they did not have access to it, the Chinese manufacturer had not made it available to them.
As I described it was not damaged, but simply not working, they agreed to send me a replacement, even though it was out of warranty, as really, as I said to them, it was not fit for purpose.
I had to send the old one back, but they sent me a satchel in which to do so, at no cost to me.
They sent me the new one very promptly.
Hope is not lost,
Someone has finally manage to extract the factory ROM for the pendo PNDPP44QC7. Just search the model number on needrom.
phoenixemer.blogspot.com.au/2017/04/pendo-pad7-pndpp44qc7.html
password : emerlitspendotab7
TWRP custom recovery
drive.google.com/open?id=0B3k_2dFOmDBGRmljV3JuSUZiUkU
I tried to upgrade a similar device to 5.x, some changes, but some options now not working I have a clone Q88H device, A33 quadcore processor 7" clone. Kernel 3.4.39, firm ware 2.1 Need to go back to 4.4.2 w latest update. Hopefully Play store will work again, as I need it. That, or change to windows version. advice pls?
drusid said:
Hope is not lost,
Someone has finally manage to extract the factory ROM for the pendo PNDPP44QC7. Just search the model number on needrom.
phoenixemer.blogspot.com.au/2017/04/pendo-pad7-pndpp44qc7.html
password : emerlitspendotab7
TWRP custom recovery
drive.google.com/open?id=0B3k_2dFOmDBGRmljV3JuSUZiUkU
Click to expand...
Click to collapse
Please i dont have a needrom account i cant download plz who Can send me the direct link to m'y account
alright guys, so here's the story. just yesterday i bought a brand new lg v10, got it home and the first thing i did was root the device and used ADB to load TWRP following the instructions here on SDA to a T for the ROOT/RECOVERY setup. and it worked. all was fine and dandy, the first time i booted into TWRP via ADB after root i got in, flashed a debloated ROM + xposed and again, everything went fine.. loaded into the OS of the new ROM, went through setup, turned on USB debugging, clicked always allow this computer, installed xposed app yadayadayada. I then, using ADB again, loaded into TWRP. i created a backup there just in case something went wrong with the changes i was about to make and once the backup was complete i loaded back in to the OS. at this point i thought i had done everything right and was confident that if i made system changes that didn't work out i could just flash the phone with TWRP from the backup i made. right? WRONG! ...apparently... so anyways, i made my first change, which was to use a NONROOT app called texdroider or whatever to change my DPI (as i have done with a couple phones previously without much issue) but i didn't take into account that stupid second screen... making the DPI changes system wide, as i'm sure those of you that know this phone are aware, causes the systemUI to crash with an error.. making the OS unusable.. so i tried to load into TWRP by holding the volume down and power button.. but instead it just booted me to the factory recovery.. not TWRP... the phone is unusable within the OS, i can't get the phone to connect to adb to boot into twrp as i had previously, i can't seem to get the phone into download mode, and i can't boot to TWRP and the OS is junk at this point.. but it DOES say on the "LG" screen that the bootloader is unlocked so i'm really hoping i'm not completely out of luck.. but i am not sure what to do at this point. does anyone here know of anything i can try to get into a custom recovery at this point? if i could get into TWRP my SD card in the phone has a backup, the original image, not to mention i could pull the SD card and add anything i need via my pc and then boot back to twrp etc etc and i would have no issue fixing the phone... i really don't understand what i did wrong or why i can't boot to my custom recovery but i'm at a loss.. i'm just looking for a way to force the phone into a custom recovery... or restore the original factory image.. if you have any advice at all i would really appreciate it.
Thanks for reading
**UPDATE** this may or may not make things much easier... but I got download mode working!! so at least there's that, still no custom recovery and i'm currently looking for a KDZ or TOT file to flash via lg flash tool... hopefully that makes things easier..
When you say you got to the factory recovery, what was that, an Android on its side or something asking you to factory reset your device? If it was the factory reset screen, if you select yes and then yes, it will take you to TWRP if you have it installed. If you don't it will factory reset your device.
ngoblirsch said:
**UPDATE** this may or may not make things much easier... but I got download mode working!! so at least there's that, still no custom recovery and i'm currently looking for a KDZ or TOT file to flash via lg flash tool... hopefully that makes things easier..
Click to expand...
Click to collapse
To boot into recovery from power off, you hold volume down & power. When you see the LG logo release and press power while continuing to hold volume down. Then as said above, it come up as a factory reset, select yes each time, and it should boot into twrp, providing you installed it correctly.
Sent from my LG-H901 using Tapatalk
YrrchSebor said:
When you say you got to the factory recovery, what was that, an Android on its side or something asking you to factory reset your device? If it was the factory reset screen, if you select yes and then yes, it will take you to TWRP if you have it installed. If you don't it will factory reset your device.
Click to expand...
Click to collapse
it was a screen asking me to do a factory reset, i click yes, it asks to confirm, i click yes again and then it "successfully" factory resets my phone... it shows the android factory reset symbol that its resetting, then says that its "optimizing apps" and goes through that whole process.. but when it finally loads the "welcome" screen (so i know for a fact that some sort reset has taken place) i get the same "systemui has crashed" error and the OS is unusable and won't connect to my computer.. idk why i can't access TWRP.. i booted to it 3 times before this happened, though never by the hardware buttons on the phone.. everytime i booted to TWRP i had used ADB to boot to TWRP.. what makes me the most sad is that i have a nandroid backup on my SD card... but i can't flash it without recovery.. which i can't install on the phone without getting into the OS..
is there any way to install TWRP or even boot to a temporary TWRP so that i can do so? if i can flash my nandroid i'm saved.. if i can get into a custom recovery i'm saved.. if i can find a .kdz file to flash, i'm saved... if i can get my phone to be recognized by my computer/adb i'm saved.... there simply has to be a way to unbrick this phone...
ZDeuce2 said:
To boot into recovery from power off, you hold volume down & power. When you see the LG logo release and press power while continuing to hold volume down. Then as said above, it come up as a factory reset, select yes each time, and it should boot into twrp, providing you installed it correctly.
Sent from my LG-H901 using Tapatalk
Click to expand...
Click to collapse
well i seem to have somehow NOT installed TWRP correctly because it just proceeds to factory reset my phone.. which for some odd reason doesn't reset the DPI... leaving me stranded... is there any way to get ADB to see my device in its present state? my computer makes the device recognition noise when i enter download mode and i can see it in device manager but not my computer or ADB
I've had this phone just over 2 months but I'm not positive, is download mode the same as the bootloader on this device? If so, fastboot commands should work, and you can flash TWRP again, or do 'fastboot boot TWRP_filename' and it will boot TWRP temporarily.
Oh, and the factory reset just wipes your data, but otherwise doesn't restore your system to factory state. That's why your dpi change remained.
YrrchSebor said:
I've had this phone just over 2 months but I'm not positive, is download mode the same as the bootloader on this device? If so, fastboot commands should work, and you can flash TWRP again, or do 'fastboot boot TWRP_filename' and it will boot TWRP temporarily.
Oh, and the factory reset just wipes your data, but otherwise doesn't restore your system to factory state. That's why your dpi change remained.
Click to expand...
Click to collapse
dude.. then what good is a factory reset?!? like seriously... and yeah, i tried that but i can't get adb to connect in download mode.. the device doesn't show up when I type "adb devices" like it did when i first rooted it. ... and i thought i followed the instructions exactly as it was laid out from this link.
http://forum.xda-developers.com/tmobile-lg-v10/general/guide-how-to-root-lg-v10-easy-t3274699
i think somewhere in there i must have missed something and ended up only booting into twrp temporarily.. which is certainly possible since i never boot to twrp during that initial process from the hardware keys or soft keys.. always through adb.. the phone was already plugged in.. typing the command was a couple keys away..
is there anyway to get TWRP on to the phone now? or am i screwed :'(
Well, it is a factory restore for the average user, because the average person isn't modifying their system. But no, I'm sure you're not screwed. If you're in the bootloader you can't use adb, you're already past that step, so you can skip to the fastboot part. What happens when you type fastboot devices? If the phone shows up then you can either fastboot flash or boot TWRP..
YrrchSebor said:
Well, it is a factory restore for the average user, because the average person isn't modifying their system. But no, I'm sure you're not screwed. If you're in the bootloader you can't use adb, you're already past that step, so you can skip to the fastboot part. What happens when you type fastboot devices? If the phone shows up then you can either fastboot flash or boot TWRP..
Click to expand...
Click to collapse
from what screen should i be attempting this? hold volume up with phone off and plug in to computer to enter download mode? should i try it at the factory reset screen (volume down plus power)? those are the only two screens i seem to have access to.. in download mode my pc/adb just doesn't recognize the phone.. it doesn't show up as a proper device like it did before this whole thing and in that factory reset mode i get nothing.. the download mode seems like its built for LG and runs from different drivers because in device manager it shows up with an error code that it couldn't start the device (this was not the case when i was using adb to unlock the bootloader and then using the bootloader to boot to TWRP..) what am i missing?
and hey, thank you so very much for taking time out of your day to help me. I really do appreciate it.
ngoblirsch said:
from what screen should i be attempting this? hold volume up with phone off and plug in to computer to enter download mode? should i try it at the factory reset screen (volume down plus power)? those are the only two screens i seem to have access to.. in download mode my pc/adb just doesn't recognize the phone.. it doesn't show up as a proper device like it did before this whole thing and in that factory reset mode i get nothing.. the download mode seems like its built for LG and runs from different drivers because in device manager it shows up with an error code that it couldn't start the device (this was not the case when i was using adb to unlock the bootloader and then using the bootloader to boot to TWRP..) what am i missing?
and hey, thank you so very much for taking time out of your day to help me. I really do appreciate it.
Click to expand...
Click to collapse
No problem buddy, and sorry for the confusion. You want to be on the bootloader screen, so here is what you can do: turn the phone off(or remove the battery if you have to, and put it back in), plug the usb cable into the computer only(not phone), hold volume down on phone, plug the usb cable into the phone. That should get you into the bootloader, and then you should be able to fastboot flash or fastboot boot TWRP.
Waiting for a resolution to this thread!
I'm pulling for you from the cheering section. (otherwise known as afraid to do it myself section!)
I'm pretty sure others have come through this exact situation unharmed (I've pretty much read every thread here.) so it's only a matter of time before you get this figured out.
Here's hoping it's sooner than later.
Sorry I can't offer more besides encouragement!
Sent from my pretty nifty brand new LG V10
ngoblirsch said:
from what screen should i be attempting this? hold volume up with phone off and plug in to computer to enter download mode? should i try it at the factory reset screen (volume down plus power)? those are the only two screens i seem to have access to.. in download mode my pc/adb just doesn't recognize the phone.. it doesn't show up as a proper device like it did before this whole thing and in that factory reset mode i get nothing.. the download mode seems like its built for LG and runs from different drivers because in device manager it shows up with an error code that it couldn't start the device (this was not the case when i was using adb to unlock the bootloader and then using the bootloader to boot to TWRP..) what am i missing?
and hey, thank you so very much for taking time out of your day to help me. I really do appreciate it.
Click to expand...
Click to collapse
Hold volume down and plug the cable in, already have completed in terminal.....
Sent from my LG-H901 using Tapatalk
YrrchSebor said:
No problem buddy, and sorry for the confusion. You want to be on the bootloader screen, so here is what you can do: turn the phone off(or remove the battery if you have to, and put it back in), plug the usb cable into the computer only(not phone), hold volume down on phone, plug the usb cable into the phone. That should get you into the bootloader, and then you should be able to fastboot flash or fastboot boot TWRP.
Click to expand...
Click to collapse
planetbeen said:
Waiting for a resolution to this thread!
I'm pulling for you from the cheering section. (otherwise known as afraid to do it myself section!)
I'm pretty sure others have come through this exact situation unharmed (I've pretty much read every thread here.) so it's only a matter of time before you get this figured out.
Here's hoping it's sooner than later.
Sorry I can't offer more besides encouragement!
Sent from my pretty nifty brand new LG V10
Click to expand...
Click to collapse
ZDeuce2 said:
Hold volume down and plug the cable in, already have completed in terminal.....
Sent from my LG-H901 using Tapatalk
Click to expand...
Click to collapse
@ngoblirsch Along with the information provided in these suggestions and what you have said, you need to reinstall your LG/fastboot drivers on your PC while in fastboot mode
YrrchSebor said:
No problem buddy, and sorry for the confusion. You want to be on the bootloader screen, so here is what you can do: turn the phone off(or remove the battery if you have to, and put it back in), plug the usb cable into the computer only(not phone), hold volume down on phone, plug the usb cable into the phone. That should get you into the bootloader, and then you should be able to fastboot flash or fastboot boot TWRP.
Click to expand...
Click to collapse
OH DEAR GOD THANK YOU!!!!
I spent all damn day yesterday trying to figure out how to get to the bootloader on this phone.. everything i read online said to hold volume down PLUS power while plugging it in and it was NOT working lmao. dude, thank you so much. after i read that comment here it took me about 30 seconds to connect to adb and boot to TWRP. This thread can be listed as RESOLVED!
Thanks again!! can't wait to start tweaking this awesome phone!
planetbeen said:
Waiting for a resolution to this thread!
I'm pulling for you from the cheering section. (otherwise known as afraid to do it myself section!)
I'm pretty sure others have come through this exact situation unharmed (I've pretty much read every thread here.) so it's only a matter of time before you get this figured out.
Here's hoping it's sooner than later.
Sorry I can't offer more besides encouragement!
Sent from my pretty nifty brand new LG V10
Click to expand...
Click to collapse
Well I appreciate the encouragement, it sure seems to have helped! Issue has been resolved. ended up that i just didn't know the hardware key combination to get to the bootloader/fastboot mode without being already connected to adb. nothing that i could find online said to hold volume down while plugging it in to a computer. as soon as i was able to do so i connected to adb and it was a breeze from there; I am now back with an OS AND a customer recovery properly installed on the device!! I will be hanging around these forums for as long as i have this phone so i'm sure i'll bump into you guys! absolutely love the community here on XDA, you guys are freaking awesome!!
ngoblirsch said:
OH DEAR GOD THANK YOU!!!!
I spent all damn day yesterday trying to figure out how to get to the bootloader on this phone.. everything i read online said to hold volume down PLUS power while plugging it in and it was NOT working lmao. dude, thank you so much. after i read that comment here it took me about 30 seconds to connect to adb and boot to TWRP. This thread can be listed as RESOLVED!
Thanks again!! can't wait to start tweaking this awesome phone!
Click to expand...
Click to collapse
Glad you got it fixed, and welcome to the V10 device and forums!