Whenever i start my samsung galaxy y s5360 screen appears completely white like a flashlight, but the phone is working i can recieve callls on my phone but cannot see anything on my device. even in dwnld mode & recovery mode the same problem persits, i cannot see anything . pls help me ????
I have installed custom creed v2.0 rom on my android device. Recently i have replaced motherboard of my device. Under Warranty.
I Want To Flash stock rom on my device but i cannot see anything on my device so i am unable to flash my device.
Another problem is that when i enter download mode odin detects my device but when i try to flash the rom it says unable to open com port
Please Help Me !!!!!!!!!!!!!
At Present my device is working properly but when i restart my device the problem returns !!!!!!
Ok try this solution.Download any Custom ROM, use your PDA or if worked the USB mount with cable use your computer.When you finished, download from market CWM program and flash the file.Another solution download the new USB drivers and install.One more solution check the port numbers or irq and change some hardware to a different port or irq
Tapatalk 2 sent from GT-I9000
Hi
i have flashed by mistake flashed i9100 recovery and kernel on a i9100G , now i can't enter recovery or boot , all i can is acess to download mode , but my pc doesn't recognize my phone , tried all drivers , odin on windows , heimdall on linux , and 2 usb cables but can't recognize my phone !
what should i do ?
did you run heimdall with root privilegues?
Hello everyone, i need help.
I have tried to root samsung galaxy s3. I was using Odin and it failed :/
Now i can only enter download mode on phone but my PC doesn't detect phone at all. I will try tomorrow other PC and other USB cable, but do you guys have any advice that can help me?
I have installed fresh Win 7, USB drivers and i have tried few versions of Odin and Kies too (it doesn't detect phone either).
emirm990 said:
Hello everyone, i need help.
I have tried to root samsung galaxy s3. I was using Odin and it failed :/
Now i can only enter download mode on phone but my PC doesn't detect phone at all. I will try tomorrow other PC and other USB cable, but do you guys have any advice that can help me?
I have installed fresh Win 7, USB drivers and i have tried few versions of Odin and Kies too (it doesn't detect phone either).
Click to expand...
Click to collapse
If download mode works , then the problem is the usb cable or the samsung driver on the PC , here is the lastest driver , If ODIN 3.10.7 detects the device try to flash TWRP-3.0.2-0 TAR as AP , if it worked reboot in recovery and the rest is up to you witch rom you gonna flash , note this is for custom roms only like CyanogenMod
Thank mate Installed TWRP and CM13, everyhing works well Changed USB cable and managed to get phone detected, quality USB cable makes difference.
If download mode works , then the problem is the usb cable or the samsung driver on the PC , here is the lastest driver , If ODIN 3.10.7 detects the device try to flash TWRP-3.0.2-0 TAR as AP , if it worked reboot in recovery and the rest is up to you witch rom you gonna flash , note this is for custom roms only like CyanogenMod
Click to expand...
Click to collapse
Hi, I have a similar situation, no power, no charge, no download mode, I even connect the USB jig and nothing. Everything happened when trying to restore boot with CWM. After reboot the phone went to hard brick state
jeanca223 said:
Hi, I have a similar situation, no power, no charge, no download mode, I even connect the USB jig and nothing. Everything happened when trying to restore boot with CWM. After reboot the phone went to hard brick state
Click to expand...
Click to collapse
Well the battery is discharged , that's why it doesn't boot , There must be something wrong or with the charger or with the usb cable , most of the time is the cable , after you manage to boot , try to flash TWRP instead CWM
rpdroky said:
Well the battery is discharged , that's why it doesn't boot , There must be something wrong or with the charger or with the usb cable , most of the time is the cable , after you manage to boot , try to flash TWRP instead CWM
Click to expand...
Click to collapse
Thanks for your prompt reply.
I tested the cable and charger in other phones and they work fine. In the other hand the S3 was at 30% by the time I restarted it and never came back to life. Also when I connect it to the PC there is no sign of the S3 on the device manager.
jeanca223 said:
Thanks for your prompt reply.
I tested the cable and charger in other phones and they work fine. In the other hand the S3 was at 30% by the time I restarted it and never came back to life. Also when I connect it to the PC there is no sign of the S3 on the device manager.
Click to expand...
Click to collapse
Try cleaning the S3 usb port , sometimes stuff gets in there and the pin's aren't connecting propedly
I have a Samsung Galaxy Ace Duos SCH-I589(cdma+gsm) model. I recently rooted it with kingoroot and now it got stuck in bootloop, i can't go to recovery mode it shows Samsung logo. I tried to flash it with odin but when i connect it to my computer it shows windows can't recognise this device. I have already installed samsung usb drivers but they are useless as my computer shows the same message. I also tried samsung kies 3 software but it also can't recognise my phone. Please help me to get out of it. :crying:
(Sorry for bad English).:cyclops:
grawish said:
I have a Samsung Galaxy Ace Duos SCH-I589(cdma+gsm) model. I recently rooted it with kingoroot and now it got stuck in bootloop, i can't go to recovery mode it shows Samsung logo. I tried to flash it with odin but when i connect it to my computer it shows windows can't recognise this device. I have already installed samsung usb drivers but they are useless as my computer shows the same message. I also tried samsung kies 3 software but it also can't recognise my phone. Please help me to get out of it. :crying:
(Sorry for bad English).:cyclops:
Click to expand...
Click to collapse
I Got the solution. I installed windows xp(32-bit) on my pc via dual boot and i connected my phone it started recognizing my phone. then i installed the samsung drivers and HOLA !!! it detected my phone as odin. I started odin and it showed com3 added!!..
Today,I was trying to upgrade my samsung tab.The upgrade instruction shows me how to upgrade using Odin 1.7v.
When I in downloading mode,Odin say FAILED! to me.I disconnected my tab and computer safely.Suddenly,my tab shows the computer and phone image.I was google this problem and i know this is soft brick.After that, my tab wont show anything if it not connected to the power.It is not work on my computer too so my computer cant detect my tab so odin and heimdall not found my device.
My questions is:
Why did my phone not connected to my tab.
Sorry for any wrong spelling because im malay
Hi , let's be clear
You can't flash like that any firmware for your device !
You must flash just firmware for the region for which the phone is made that why Odin will fail .
I understand that on your device once you had disconnected from pc is showing now Computer and phone icon with usb or what ?
Did you tried again to put your device into Download mode ?
samsung pt 1000
Sorry for changing matters,but i have a serious problem on my android tab. i wanted to upgrade my samsung galazy tab p1000 from 4.4 to 5.01, using twrp,i mistakenly installed the gapps instead of the custom rom, the twrp then rebooted and when i tried to flash the custom rom again,it says it cannot mount storage,cannot mount data and system... i then flashed cwm recovery on it,but its stills says cannot mount storage,how can i fix it,and also how can i revert back to twrp, twrp isnt available for this samsung,but it was on it by default....pls help