Related
I've got an Iconia tablet with a broken recovery (I've been using CWM and Thor's ICS ROM). I'm going to follow the steps outlined here
http://forum.xda-developers.com/showthread.php?t=1129873
but.... when I look up the UID from every method, all I get is 0123456789ABCDEF.
Given all the dire warnings about not being able to recover if/when things go wrong without the real UID... this 123 UID isn't the real UID.... is it safe to proceed with the repair here? Or are things really messed up?
I have not messed with ICS myself, but my understanding from reading the ICS threads in the Iconia forums is that the device is no longer using the uid for usb serial number. So it seems you can't get it that way if you have installed any of the ICS updates.
The suggestion I have seen is to look for androidboot.serialno in dmesg directly after booting, but that does not seem to help everyone.
Another option might be to get the device into APX mode and do a usb bulk read, the first read should return 8 bytes that is the UID. I would assume this to still work even after you have installed ICS but I have not tried. I pasted some code for opening the device, reading and printing the uid (using libusb, tested on Linux) on the Iconia forum earlier this week.
Hmm OK that's helpful info. Thanks.
I tried the androidboot.serialno in dmesg, but I wasn't able to find the string.... I will try that again after a clean boot.
I've been doing all the debugging from my one Windows machine... I haven't tried plugging it into my Linux PC yet... that's next... I haven't discovered APX mode yet. Time to do some more reading, thanks for the pointers.
Edit 1: OK checked lsusb -v and I serial also shows 0123456789ABCDEF
Edit 2: Clean boot and did a new dmesg dump.. parsed the output and no sign of androidboot.serialno or anything that even resembles it.
OK, things are not getting better here. I've been tinkering a lot, and in some respect I've just made things worse.
I still cannot find the UID with any of the documented methods here on XDA. I've tried
using adb devices
using Linux lsusb -v
checking the output of dmesg for androidboot.serialno
plugging in to Windows and looking at the USB mount info using USBDeview
looking at the device manager in Windows and checking the "Parent" field
I have also booted into APX mode and to discover the UID that way too... and nothing.
All I get is 0123456789ABCDEF
At this point the frustration level was getting high enough for me to be a bit reckless... I copied "itsmagic" into /data made it executable and ran it. No errors.
I rebooted into Recovery mode, and there I get scrambled graphics on the screen (it's the Acer logo duplicated several times with loads of tearing and distortion) and the tablet vibrates constantly.. non stop until I reboot it.
I can boot normally into the current ROM (Thor2002ro v96) so I haven't busted it completely. If I try to use my existing CWM manager to install any other ROM or use the manager to reboot into recovery mode, it goes back to the scrambled screen and vibrating constantly.
Does anyone have any ideas or suggestions here? I'd be happy to even roll back to stock and start fresh. There is nothing on the tablet that needs to be saved... except the functionality of the tablet itself.
When you write nothing about APX mode, does that mean literary nothing or nothing different?
If you have root you can see if you have anything interesting in /proc/cmdline.
If not I'm out of ideas on how the get the UID for now.
While i very much doubt 0x0123456789ABCDEF is the UID used to generate the SBK of the device you could try reading and decrypting the beginning of mmcblk0 using the SBK that would give (0xA9EA7E00 0xF12BEB06 0x3AD20804 0x364A5F03) to verify this.
You could probably overwrite the restore partition from your running system, I have never done that myself though.
OK, it's SOLVED.
After much swearing and crying and a little help from the forum here and in other posts the solution to fixing the broken tablet was actually quite easy.
Based on the information here:
http://forum.xda-developers.com/showthread.php?t=1459821
- I downloaded recovery-ra-iconia-3.16-gnm.img using teh links provided on the thread above
- I ran itsmagic
- Then I did these steps:
Code:
adb push recovery-ra-iconia-3.16-gnm.img /mnt/sdcard
adb shell
su
dd if=/mnt/sdcard/recovery-ra-iconia-3.16-gnm.img of=/dev/block/mmcblk0p1
sync
reboot recovery
This booted a working recovery mode (FINALLY), and I was able to successfully flash the latest Thor2002ro ICS ROM.
Thanks for your help and suggestions eppeP, they got me thinking in the right direction.
Hello guys I am trying to bypass screen lock via adb but when I write adb devices it shows "0123456789ABCDEF Device" and then when I type adb shell then it shows"$" after that whatever I type it shows permission denied(even if I write adb).Please Help
please clear up Google
account lock
Im faily new to the android world. please forgive me of any stupid questions that i may ask.
I was trying to reinstall a new version of maximus 7 on my htc one .
i had the CM 10 installed and was having wifi issues. read that i should clear data and what not and instead of doing a factory reset....i did a format...
now i have no rom on the phone and cant figure out how to do this.
ill upload a video on what i currently have going on...
when i plug it in to the computer...i head the noise from the computer saying that it connected..but nothing popped up.
please help.
heres the youtube video of whats going on with the phone. take a look and suggest any fixes . thanks.
youtube.com/watch?v=NCSJPpLuQiE
adb sideload. you should search this thread there are many that will help you
i searched what i could. didnt find much because im not familiar with terms much.
andrey64 said:
i searched what i could. didnt find much because im not familiar with terms much.
Click to expand...
Click to collapse
you should download all in one toolkit and use the sideload feature. read the on screen directions as you go through the process and you should have no problems
I also ran into a similar predicament a few days ago. I found adb push to be much easier than sideload. Make sure that your drivers and adb is installed on your PC (I assume Windows). In recovery mode, plug phone into USB and your PC should detect the phone but you won't be able to see phone contents; mine made a connection sound.
Then open a command prompt and type: adb push ROM.zip /data/media/ROM.zip
Rom.zip is the rom file that you want to flash, which should be in the same folder as adb. For the path, I used "/data/media" because the custom recovery defaults to that but you may be able to use "/sdcard" as well.
Then flash the rom using recovery
Hi
I've looked around the XDA Forums, and on various other forums. I have a Hipstreet Titan, I tried to root using the Tasselhof's Root package, and it went reasonably well until I selected the option (#3) to copy over the build.prop file. After that I get the Android logo every boot-up. Factory wipe I guess wiped - I don't really have any way to verify. I pushed a different build.prop on, but that didn't seem to take (or make any difference). For some reason my adb shell (whateverother parms) doesn't work. It returns "- exec '/system/bin/sh' failed: No such file or directory (2) -". So I figure the OS has been toasted. (I didn't have this much trouble rooting my LG Eclypse. )
Now, I just need to find an original ROM, or some other slightly modded (rooted would be nice) ROM to get on to my device before I find out how far out my back door I can throw this thing. As this Hipstreet tablet is an off brand (really far off, but hey, I got it free), I haven't been able to find a ROM posted anywhere. Likely I just haven't looked in the right spot yet. Yes, I know, I should have backed up first - but I didn't. As soon as I get an OS working on this, I'll back it up - promise.
I've also tried "adb sideload system.img" using a system image file that comes with the Android ADT kit and the factory recovery mode. That appears to upload the file, reboot the device then report (on the windows terminal) "* failed to write data 'protocol fault (no status)' *". The device reboots into the recovery system screen.
So, if someone would be so kind as to point me to a rom file that will work on this device, it would be most appreciated.
PS this is the Titan rev A, when I got the device (second hand) the Google Play store functioned just fine. The person I got it from is not a techy, so I doubt they applied any root or update to it, so I'm guessing it came already set up.
Ok, let me rephrase simply.
Can someone with a working Hipstreet Titan, rooted or not, please send me, or post a link to their ROM?
Click to expand...
Click to collapse
I know people have this device, and it's quite reasonable to assume that not all of them are bricked, therefore this request is technically feasible. Further, with a number of people posting about this device in technical forums, I know people with technical knowledge own this device.
I would really hate to throw out an otherwise perfectly good tablet.
Jarod997 said:
I would really hate to throw out an otherwise perfectly good tablet.
Click to expand...
Click to collapse
Hi - did you ever resolve this issue?
beach9000 said:
Hi - did you ever resolve this issue?
Click to expand...
Click to collapse
Not yet. I had given up for a while. Most of my internet searches kept coming back to the same few articles on this website.
I have a lead on someone who has another Titan, but they live seven hours away - it's been difficult coordinating a meeting.
Jarod997 said:
Hi
I've looked around the XDA Forums, and on various other forums. I have a Hipstreet Titan, I tried to root using the Tasselhof's Root package, and it went reasonably well until I selected the option (#3) to copy over the build.prop file. After that I get the Android logo every boot-up. Factory wipe I guess wiped - I don't really have any way to verify. I pushed a different build.prop on, but that didn't seem to take (or make any difference). For some reason my adb shell (whateverother parms) doesn't work. It returns "- exec '/system/bin/sh' failed: No such file or directory (2) -". So I figure the OS has been toasted. (I didn't have this much trouble rooting my LG Eclypse. )
Now, I just need to find an original ROM, or some other slightly modded (rooted would be nice) ROM to get on to my device before I find out how far out my back door I can throw this thing. As this Hipstreet tablet is an off brand (really far off, but hey, I got it free), I haven't been able to find a ROM posted anywhere. Likely I just haven't looked in the right spot yet. Yes, I know, I should have backed up first - but I didn't. As soon as I get an OS working on this, I'll back it up - promise.
I've also tried "adb sideload system.img" using a system image file that comes with the Android ADT kit and the factory recovery mode. That appears to upload the file, reboot the device then report (on the windows terminal) "* failed to write data 'protocol fault (no status)' *". The device reboots into the recovery system screen.
So, if someone would be so kind as to point me to a rom file that will work on this device, it would be most appreciated.
PS this is the Titan rev A, when I got the device (second hand) the Google Play store functioned just fine. The person I got it from is not a techy, so I doubt they applied any root or update to it, so I'm guessing it came already set up.
Click to expand...
Click to collapse
It looks like they made a few different versions of the tablet and it matters also about how much storage as to which firmware you should try. The person here: http://www.androidtablets.net/forum...eet-titan-a13-7-inch-tab-firmware-needed.html was able to load the firmware from another device that was similar. There were some major issues, but better to get it running first and sort that out later I guess. But his link has a bunch of other a13 tablet firmwares. If that is the same as yours, possibly one of them will be enough to boot up.
es0tericcha0s said:
It looks like they made a few different versions of the tablet and it matters also about how much storage as to which firmware you should try. The person here: (link manually removed) was able to load the firmware from another device that was similar. There were some major issues, but better to get it running first and sort that out later I guess. But his link has a bunch of other a13 tablet firmwares. If that is the same as yours, possibly one of them will be enough to boot up.
Click to expand...
Click to collapse
Thanks for the help! I'll have a look at some of those. I'd really like to have a tablet back that doesn't have a 3.5" screen.
So I managed to get LiveSuit 1.11 installed on Win 8-64, yes it IS doable. But, my problem is I can't get the tablet recognized. The Power+Vol boot takes it in to "recovery" mode, (so reports "adb devices") - does this keep it from being able to be used by LiveSuit?
"adb wait-for-device" hangs
In my Device Manager I have Android Device->Android ADB Interface, and Universal Serial Bus controllers->USB Device(VID_1f3a_PID_efe8) with a yellow exclamation.
I know I had "adb wait-for-device" passing fine at one point, but I don't remember what I had to do to get there. So much trouble for a free tablet.
I have a Titan that I unfortunately tried to root using what would only work on the ICS model and it's the JB model. It bootloops on the Android boot sequence. I can adb into the tablet and browse it, and I can see in the logcat where it gives up and restarts.
I saw the post on that other forum about using the Tragidy firmware but that file at Dorkfiles now appears to be paywalled. If anyone has that or another compatible firmware already downloaded and would be able to share, that would be wonderful.
At this point the Titan in front of me may as well be a mini cutting board or a large coaster. Not that it matters much, as some store gave it out to my parents for free and we all own better devices. It's just that they don't own any Androids and I thought I could configure this one as an easy remote for them to push content from their media server to their Smart TV instead of using the TV's complicated interface.
cmstlist said:
I have a Titan that I unfortunately tried to root using what would only work on the ICS model and it's the JB model. It bootloops on the Android boot sequence. I can adb into the tablet and browse it, and I can see in the logcat where it gives up and restarts.
I saw the post on that other forum about using the Tragidy firmware but that file at Dorkfiles now appears to be paywalled. If anyone has that or another compatible firmware already downloaded and would be able to share, that would be wonderful.
At this point the Titan in front of me may as well be a mini cutting board or a large coaster. Not that it matters much, as some store gave it out to my parents for free and we all own better devices. It's just that they don't own any Androids and I thought I could configure this one as an easy remote for them to push content from their media server to their Smart TV instead of using the TV's complicated interface.
Click to expand...
Click to collapse
So I managed to get a system backup off of my father-in-law's Titan - just have to figure out how to get it on my brick. I'm having great difficulty trying to do a restore while in recovery mode.
What means did you use to back it up?
Sent from my Nexus 5 using Tapatalk
cmstlist said:
What means did you use to back it up?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
adb backup
Jarod997 said:
adb backup
Click to expand...
Click to collapse
The adb backup command doesn't back up the system files. Unless there's some other way to use it that I'm not aware of?
Sent from my Nexus 7 using Tapatalk
cmstlist said:
The adb backup command doesn't back up the system files. Unless there's some other way to use it that I'm not aware of?
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Aw crap, really? The cutting board a-la-iPad commercial is sounding like such a good idea at the moment.
On the good tablet I could get in the shell - "adb shell", and then "su", but then what? How do you copy all the files off the system through the USB onto the computer from the shell? For whatever reason (and I dislike ADB for this) I could not do "adb pull /* /destination-folder/*" - it kept saying that it was skipping a lot of files. Or otherwise if I was trying other variations on commands and parameters, adb would just spew its help page - never mind telling me what's wrong with the command I just entered.
Why, oh why, is it so hard to take a copy of a good working OS and put it on to another tablet?
But, make you a deal - help me get a good system image off this working tablet and I'll toss it to ya.
If you can find the right mount points on the partition table got may be able to make a system dump using dd. But restoring it I have no idea since there's no custom recovery available for this tablet.
Sent from my Nexus 7 using Tapatalk
Hi guys,
Wondering if anyone here has the know how to help.
Im fiddling with some new Kobo arcs, the 7HD and the 10HD and im having some bother with installing a custom recovery img.
For simplicity sake im going to refer to them as the same device as they are both behaving the same way
The device is rooted, and I am able to flash a custom recovery made by Jenkins builder but its not functional, when you boot to the recovery OS it just goes black and the back light flashes on an off (screen remains black it just lightens up)
At this point I can reboot as normal and adb to it and flash the original recovery img and all is well.
As far as I can tell its bootloader is unlocked but there might be a second bootloader im not able to interact with yet, possible called uboot?
From adb I am able to reboot the device in to bootloader and fastboot and both function as id expect, but the problem im having is booting directly to fastboot in case I bugger something up which would allow me to fix it.
I can boot the device in to a "mode" that tries to install an APX device, ive tried using various adb, fastboot, and composite drivers and nothing seems to work, ive downloaded some old NVidia APX tegra 2 drivers ive found but these fail to work with the NVFlash utility that comes with it, it says unknown device found, which would make sense given the utility is at least 3 years old
So firstly,
Does anyone know what might course the customer recovery rom to fail and yet flash like it is doing, if so any suggestions where to start to look for a solution?
Secondly,
Does anyone know much about this APX mode and how to actually put it to good use the driver appears to work and communicate but im needing something desktop wise to talk to it...?
hope you guys can help
edit
ive answered some of question 2 myself, it appears its a pain in the arse by all accounts and not as user friendly as I was hoping, I can send commands to it but it appears that commands may need to be "signed" of sorts as I don't get any response other than acknowledgment of the command sent, ill monitor the USB traffic and see if that sheds some light, it also appears that NVflash (not to be confused with its cousin in the GPU arena) is also hopelessly out of date and once again Linux is needed to get something more updated, if there is ANY help at all id appreciate some input
D
dazza9075 said:
Hi guys,
Wondering if anyone here has the know how to help.
Im fiddling with some new Kobo arcs, the 7HD and the 10HD and im having some bother with installing a custom recovery img.
For simplicity sake im going to refer to them as the same device as they are both behaving the same way
The device is rooted, and I am able to flash a custom recovery made by Jenkins builder but its not functional, when you boot to the recovery OS it just goes black and the back light flashes on an off (screen remains black it just lightens up)
At this point I can reboot as normal and adb to it and flash the original recovery img and all is well.
As far as I can tell its bootloader is unlocked but there might be a second bootloader im not able to interact with yet, possible called uboot?
From adb I am able to reboot the device in to bootloader and fastboot and both function as id expect, but the problem im having is booting directly to fastboot in case I bugger something up which would allow me to fix it.
I can boot the device in to a "mode" that tries to install an APX device, ive tried using various adb, fastboot, and composite drivers and nothing seems to work, ive downloaded some old NVidia APX tegra 2 drivers ive found but these fail to work with the NVFlash utility that comes with it, it says unknown device found, which would make sense given the utility is at least 3 years old
So firstly,
Does anyone know what might course the customer recovery rom to fail and yet flash like it is doing, if so any suggestions where to start to look for a solution?
Secondly,
Does anyone know much about this APX mode and how to actually put it to good use the driver appears to work and communicate but im needing something desktop wise to talk to it...?
hope you guys can help
edit
ive answered some of question 2 myself, it appears its a pain in the arse by all accounts and not as user friendly as I was hoping, I can send commands to it but it appears that commands may need to be "signed" of sorts as I don't get any response other than acknowledgment of the command sent, ill monitor the USB traffic and see if that sheds some light, it also appears that NVflash (not to be confused with its cousin in the GPU arena) is also hopelessly out of date and once again Linux is needed to get something more updated, if there is ANY help at all id appreciate some input
D
Click to expand...
Click to collapse
I know this is old, but how did you flash the original recovery? I think I need to do this so that I can install the update ZIP for the Kobo 10. CWM is failing to install the file.
I spent some time picking through the local upgrade utility Verizon packages with the phone, and discovered that directly before attempting the reflash the phone from download mode, the installer drops the following file, which by comparison to others I have found, appears to be a firehose. Additionally, the certificate inside the file matches Alcatel/TCL and seems to be for this platform.
I have tried on my own device with no success. However, I'm beginning to draw the conclusion that my phone may have been factory defective, since I cannot reset it successfully, and others do not seem to have the same problems with their devices as I do.
Nonetheless, it may be worth it for someone to try using the file in the common Qualcomm utilities like EFS Explorer and QPST to see if its possible to pull ( and hopefully push ) files to and from these devices - like the full bootloader partition.
I'm going to give it a go and see what happens
ᐯerified Developer said:
I'm going to give it a go and see what happens
Click to expand...
Click to collapse
Any go?
Honestly it's been a min I was trying to figure it out but I can't get my phone to detect on QPST I remember when I originally had gotten the phone I was able to get it to pull up like diagnostic mode and then it would pull up under EFS and stuff I'm not no pro or anything when it comes on stuff like that I was just looking through the files and what not trying to figure it out but anyway I have updated my phone knowingly I shouldn't have and I just can't seem to get it back recognizing on my computer at least under that mode so I'm not sure hopefully this makes sense