Hello everyone.
I'm coming through this post to ask someone an A20 firmware.
The fact is: I looked for roms, but it's harder to find one. I tried lots of roms, I got two that worked good,
but unfortunatelly, I got camera and g-sensor problems (I think they're for 10 inches tablets).
I don't want to use the default rom that comes with my tablet because it has only 500mb of internal storage
(the internal storage used for applications, and besides, 150mb already come "used"). Also, after some months
the firmware starts getting slow and freezing during initialization.
My tablet specifications are attached to the post.
Related
Hi folks,
I'm new to the XDA forums (so hey everyone!) but I'm not new to the android platform.
I picked up a Archos 101IT the other day and would like to ask a couple of questions if possible.
I sat last night and read the whole 240 pages of entries on the URUKDROID thread but my main question does not appear to have been covered previously.
So..........
1) Can I install URUKDROID version 1.5 even though my archos firmware is version 2.4.80? (the latest version i believe)
2) I read that the early versions of this custom ROM were recommended as SD card installations only.
Now as the ROM has been refined it is also suitable for allocation to internal memory.
Are there any known issues with doing it on the internal memories these days or have any issues since been ironed out?
1) As UD is completely seperated, it doesn't matter which OS is on.
2) No, no problems except that it is faster on internal.
fzelle said:
1) As UD is completely seperated, it doesn't matter which OS is on.
2) No, no problems except that it is faster on internal.
Click to expand...
Click to collapse
Thanks for that, appreciate the response.
It's hard to me to actually find a whole lot of information so I'll just like you to the Tablet that I purchased. I know it is an AllwinnerA10 Boxchip processor speed runs at 1.2 GHZ. So basically when I first got it it was running fine, I attempted to flash an updated rom which ended up failing, so I decided to install a new recovery System. I do not recall the original recovery system, but what happened is I installed the wrong recovery system. I have an a10 and I accidentally installed a A13 Recovery System "version 6.0.2.8." instead of an A10 Recovery System. Basically the Recovery Mode is only partially functional due to it being programmed for an A10. It will not let me install/flash an android image and the screen flashes, it will also not allow me to mount files from my internal SD card, I believe that it will allow me to install from a external micro-sd. However, it needs to be charged at the moment so my memory is a little hazy on whether it allows me to. So lets assume that it doesn't allow me to do that for now. How would I go about fixing this problem, and unbricking my Tablet. Since I haven't made enough posts I am unable to send you a direct link. I can however give you some keywords so that it pops up when you are looking for it. It is from LightintheBox.com, it should be the 4th url on a google search.
DesireTab - Android 4.0 Tablet with 9.7 Inch Capacitive Touchscreen (16GB, 1G RAM, 1.2GHz, 3G, Dual Camera, HDMI Out,8000mA)
jrockfever said:
It's hard to me to actually find a whole lot of information so I'll just like you to the Tablet that I purchased. I know it is an AllwinnerA10 Boxchip processor speed runs at 1.2 GHZ. So basically when I first got it it was running fine, I attempted to flash an updated rom which ended up failing, so I decided to install a new recovery System. I do not recall the original recovery system, but what happened is I installed the wrong recovery system. I have an a10 and I accidentally installed a A13 Recovery System "version 6.0.2.8." instead of an A10 Recovery System. Basically the Recovery Mode is only partially functional due to it being programmed for an A10. It will not let me install/flash an android image and the screen flashes, it will also not allow me to mount files from my internal SD card, I believe that it will allow me to install from a external micro-sd. However, it needs to be charged at the moment so my memory is a little hazy on whether it allows me to. So lets assume that it doesn't allow me to do that for now. How would I go about fixing this problem, and unbricking my Tablet. Since I haven't made enough posts I am unable to send you a direct link. I can however give you some keywords so that it pops up when you are looking for it. It is from LightintheBox.com, it should be the 4th url on a google search.
DesireTab - Android 4.0 Tablet with 9.7 Inch Capacitive Touchscreen (16GB, 1G RAM, 1.2GHz, 3G, Dual Camera, HDMI Out,8000mA)
Click to expand...
Click to collapse
bump
Hi guys, it's my first post here and I apologize if I'm wrong place to write
I updated my LG G2 mini to Android 5.0.2 (stock with OTA) and unfortunately I noticed that now my system data occupies approximately 5 GB of memory (and my phone has 8GB of internal memory)
The problem now is that I have no more space to update all my applications, so I ask here if it was possible to eliminate something, or if it was necessary to install a ROM.
I notice that I've never done any kind of mod to the phone, so I am a complete novice .
I'd rather have still Android 5.0.2, but I would be fine also a modified ROM, also to reduce the use of space, battery and more.
Finally, I add that I still have one year warranty, and if it were possible I would like to preserve it, but if you say that applying a mod the phone will get better, then accept all your tips
A lot of thanks in advance and sorry again
I'm a long time android user but have never rooted/flashed/recovered or anything like that.
A few weeks ago i bought a "full android" smart watch, the Lemfo LEM4.
According to the specs it's has android 4.4.
https://www.aliexpress.com/store/pr...32742033816.html?spm=2114.12010608.0.0.AGUhkp
It has 4 GB of storage but it seems that it is divided into different parts. There is only 601mb of space for installing apps and a seperate partition with about 2gb of storage for video's, photo's, music and other files.
I have already opened a thread about that :
http://forum.xda-developers.com/sma...emfo-lem4-smart-watch-memory-storage-t3516500
The 601mb partition is already loaded with stock apps, and you get about 150mb of free space to install other apps. You can imagine that this makes the watch very limited.
So i'm trying to figure out a way to change all that but my knowledge of android rooting and "hacking" is very very limited right now.
So i'm turning to the XDA community to try to find answers for a couple of questions.
1. I was wondering if the 601mb partition and 2gb partition is actually one storagespace that is split into two partitions(or more parts, because i don't know where the android OS is stored on). So is there a way (or an app) to find that out.
2. If it is indeed one storagespace, is there a way to change the partition (for example putting the 601mb and 2gb back together).
3. Additional question : can i install another android version onto this smart watch? Or do you need drivers and special software to make it all work.
Can this all be done?
I'm trying to figure all this out too. Along with if/where the SD card slot is (or if it's the same as the SIM slot).
Edit: SOB! I just read that it doesn't support TF or SD cards. It must have been listed on a bunch of generic Chinese listings that just list every feature you'd want to see. Sighh. Guess I'll join the struggle of figuring out how to repartition.
Hi
I have a chinese android phone, it displays "SUSAN" when it starts up and here are the techincals:
Development Device ID
J3RF-M3EP-6USW-6
MODEL NUMBER
M5
ANDROID VERSION
5.1
BASEBAND VERSION
SC7731
BUILD NUMBER
DW_X10_H2.0_GT022X_M5_BOE_QG_FL_V1.0_20171202
HARDWARE VERSION
HW_V2.0
I am trying to find ANY rom that will actually allow me to use the phone.
It has an Octa Core, 2GB ram, 32GB storage.
Problem is, the firmware that is installed at the moment will not allow me to install ANYTHING as it says there is not enough space.
I have done fill hardware resets and it still reports this. I have even put a 32GB Micros SD and set that to be the install location, and it still wont allow me to install anything.
The phone is already unlocked.
I have NEVER flashed a firmware before so please, make the instructions as idiot proof as possible.
Thank you in advance.
Hey,
Did u get anywhere with this, I have been looking around for a ROM / flashing procedure for one of these phones to make it usable.
Thanks.
---------- Post added at 01:02 PM ---------- Previous post was at 12:50 PM ----------
Found this
https://www.needrom.com/download/susan-m5-x8-x10/
Although I haven't tried to flash it yet.....
I just replied to another member What a strange coincidence. I have a friend of mine who owns a pawn shop and he always lends me "acquired" phones so I can analyze them and see if I want to buy them I have on my person the X8 5.1 susan. I'm Canadian and usually were pretty limited to our choices from providers. how a china phone got here? i've never even heard of this brand I don't even know what it is root would be an option. if I could know if I can get it to nougat. I started up with S6 then s7 and now I'm at the S8 (oreo) can't root and S8 Plus rooted nougat. I can't have an unrooted phone it's like driving a Porsche that's an automatic. Anyway so far my used with it has been very frustrating because it's it's not very touchscreen friendly at least mine is in and I don't know what version of Android experience it is but it's not very opening to the user. I've come to the conclusion that I think pixels are the way to go I just don't want to pay 1300 bucks for one because I know that I'll drop it in the sewer two days after I own it. he wants $80 for it.
OS flawed
there must be bugs in OS ... 8GB but access to 2% ???
susan M5 Phone
Did you get a solution for the susan M5 phone not having enough storage to download an app as I have the same problem. thanks
hogman_1 said:
Hi
I have a chinese android phone, it displays "SUSAN" when it starts up and here are the techincals:
Development Device ID
J3RF-M3EP-6USW-6
MODEL NUMBER
M5
ANDROID VERSION
5.1
BASEBAND VERSION
SC7731
BUILD NUMBER
DW_X10_H2.0_GT022X_M5_BOE_QG_FL_V1.0_20171202
HARDWARE VERSION
HW_V2.0
I am trying to find ANY rom that will actually allow me to use the phone.
It has an Octa Core, 2GB ram, 32GB storage.
Problem is, the firmware that is installed at the moment will not allow me to install ANYTHING as it says there is not enough space.
I have done fill hardware resets and it still reports this. I have even put a 32GB Micros SD and set that to be the install location, and it still wont allow me to install anything.
The phone is already unlocked.
I have NEVER flashed a firmware before so please, make the instructions as idiot proof as possible.
Thank you in advance.
Click to expand...
Click to collapse
Is a joke. It doesn't have 8 GB storage. It have 87 MB.
Same on RAM and CPU. It have 256 MB RAM and a 2 x @1.00 GHZ CPU (sc8825).
You can root this phone and put LINK2SD which moves your apps to sdcard.
Please keep the stock firmware (in this case, you can make a backup if you want to flash an firmware).
hogman_1 said:
Hi
I have a chinese android phone, it displays "SUSAN" when it starts up and here are the techincals:
Development Device ID
J3RF-M3EP-6USW-6
MODEL NUMBER
M5
ANDROID VERSION
5.1
BASEBAND VERSION
SC7731
BUILD NUMBER
DW_X10_H2.0_GT022X_M5_BOE_QG_FL_V1.0_20171202
HARDWARE VERSION
HW_V2.0
I am trying to find ANY rom that will actually allow me to use the phone.
It has an Octa Core, 2GB ram, 32GB storage.
Problem is, the firmware that is installed at the moment will not allow me to install ANYTHING as it says there is not enough space.
I have done fill hardware resets and it still reports this. I have even put a 32GB Micros SD and set that to be the install location, and it still wont allow me to install anything.
The phone is already unlocked.
I have NEVER flashed a firmware before so please, make the instructions as idiot proof as possible.
Thank you in advance.
Click to expand...
Click to collapse
Hi There,
at first I would recomand to Root.
Try king root, Frama root and so one (playstore or use xda search)
Then You can look after read and Write permissions in your Device.
That should solve your Problem.
Susan X5
Your smartphone has less than 30MB of system storage. I have my brother's Susan X5 and I checked it via commands.
adb shell
df
The image shows it. Any app you want to install has to have less than 30 MB size and you have to forcefully install it to your sdcard. Even if your sdcard is not full, since the system partition is less than 30 MB, it will be not able to copy it from system to sdcard.
Install everything in sdcard with the storage option in settings, "install everything on sdcard".
That Chinese smartphone is not even lollipop. You can tell it from the icons size and ui. The sdcard directory is write protected, so you cannot check it and test the scam. The texts saying Android version number and storage size are fake. If you can build a rom you can fake these numbers.
My brother bought from the Wish company. I have seen Wish adverts, the products they sell... well, they lack any common sense.
Now you know why.
I have a phone which displays susan and model is y6,can i get its flash rom?