Hello everyone. I have gotton permission from @jholtom to re-open this thread and start building it on my own (we are never alone ). He will still be here and will still be helping. All credit goes to him, he got this off the ground for the LS990. I'm just here to take over the saddle. Enjoy!
[ROM][Q&A] CM12 Questions and General Thread
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1 (Lollipop), which is designed to increase performance and reliability over stock Android for your device.<br />
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Kernel Source: https://github.com/CyanogenMod/android_kernel_lge_g3
Click to expand...
Click to collapse
Yup. It's finally here. CM12.1 with basically everything* working.
*Working:
Pretty much everything:
WiFi
3G/LTE
Camera (back and front-facing and LED flash,) camcorder works in 1080p, no 4k yet
Sound
Screen (duh)
Proximity, Accelerometer, Gyroscope
GPS
Partial Bluetooth support (FitBit and some other devices not working yet)
SDCard read/write
SMS/MMS
NFC - Yes NFC works now, but needs testing
*Not working:
EVDO Rev. A has some issues with out a patch (its cooked into the unofficial rom already)
CM-12.1 reports of DATA not working, but its working for some Its mostly fixed in 4/23 build, please use ZV8 modem
Installation Instructions:
*NOTE*: You must be Bump'd for this to work. This requires flashing via custom recovery
1. Download this and 5.1 GApps (recommended PA GApps Here. You are going to need to use the Lollipop ones, this is 5.1)
2. Put both on Internal Storage
3. Reboot into recovery
4. BACKUP CURRENT ROM
5. Factory Reset/Wipe if not on CM12, you CAN dirty flash cm12.1 over cm12
6. Flash CM12.1 (no need to wipe System)
7. Flash GApps 5.1
(Optional: flash SuperSU Lollipop Edition for Root. Download here)
8. Reboot
9. wait.. wait ..wait
10. Profit
To get root/SU, enable Developer Options and change "Root Access" options.
Downloads
Official CM Nightly Builds HERE
Latest Unofficial Builds: 7/21/15
Hrubak's Builds Download from MEGA
Mirror: Hrubak's Builds Download from AFH
K0nane Server Links:
Repositories are at github.com/jholtom
Kernel sources are at github.com/invisiblek/android_kernel_lge_g3
Using Cyanogenmod Repositories
@invisiblek was pretty awesome in getting this going, much more credit goes to him than me, he really had the base for this, and now I just fix crap for the ls990.
@Berzerker7 @jholtom, shoutout because I stole your thread body.
XDA:DevDB Information
CyanogenMOD 12.1, ROM for the Sprint LG G3
Contributors
clark44, Hrubak, RandomPooka, invisiblek, jholtom, Shelnutt2
Source Code: https://github.com/cyanogenmod
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Nightly
Beta Release Date: 2015-06-23
Created 2014-11-30
Last Updated 2015-07-21
So awesome to see this! Thanks mass for taking over. Encouraging.
Good work, unfortunately I cannot get any data or network connection. WiFi works great however
It looks like Bluetooth is struck out so I'm not sure if it's working here or not but if it isn't RandomPooka has the fix for it.
YYYYEEEESSSSS!!! My pants are soaked
Welcome back good to see you taking the reins
Sent from my LGLS990 using Tapatalk
Not data connection only wifi
crazycori said:
Good work, unfortunately I cannot get any data or network connection. WiFi works great however
Click to expand...
Click to collapse
Same here
clark44 said:
Hello everyone. I have gotton permission from @jholtom to re-open this thread and start building it on my own. He will still be here and will still be helping. All credit goes to him, he got this off the ground for the LS990. I'm just here to take over the saddle. Enjoy!
<b><font color="Red">Beta is here, go try it</font></b><br />
<br />
<br />
Yup. It's finally here. CM12 with basically everything* working.<br />
<br />
*Working:<br />
Pretty much everything:<br />
WiFi (Reports of 5Ghz being broken)<br />
2G/3G/LTE<br />
Camera (back and front-facing and LED flash, no 4K recording as it's not in CM yet) (new issues with camera connection error, and quality)<br />
Sound (little bit quiet)<br />
Screen (duh)<br />
Proximity, Accelerometer, Gyroscope<br />
SDCard read/write<br />
GPS (can drain battery really fast)<br />
<br />
*Not working:<br />
Wireless Charging (it works but it's very, very slow)<br />
Bluetooth - (All of it)<br />
NFC - (Might be a battery killer in current state, uninstall or freeze it in TiBu)<br />
<br />
<br />
Installation Instructions:<br />
*NOTE*: You must be Bump'd for this to work. This requires flashing via custom recovery.<br />
1. Download this and GApps (recommended PA GApps here You are going to need to use the Lollipop ones, this is 5.0)<br />
2. Put both on Internal Storage<br />
3. Reboot into recovery<br />
4. BACKUP CURRENT ROM<br />
5. Factory Reset/Wipe<br />
6. Flash CM12 (no need to wipe System)<br />
7. Flash GApps<br />
(Optional: flash SuperSU Lollipop Edition for Root. Download here)<br />
8. Reboot<br />
9. ???<br />
10. Profit<br />
<br />
<b>Downloads </b><br />
<br />
K0nane Server Links:
11/30 Build<br />
<br />
Repositories are at github.com/jholtom<br />
Kernel sources are at github.com/invisiblek/android_kernel_lge_g3<br />
<br />
@invisiblek was pretty awesome in getting this going, much more credit goes to him than me, he really had the base for this, and now I just fix crap for the ls990.<br />
<br />
@Berzerker7 @jholtom, shoutout because I stole your thread body.<br />
XDA:DevDB Information
CyanogenMOD 12, ROM for the Sprint LG G3
Contributors
clark44, jholtom, invisiblek
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Beta
Current Beta Version: 11/30
Beta Release Date: 2014-11-30
Created 2014-11-30
Last Updated 2014-11-30
Click to expand...
Click to collapse
Do we have an official change log or support forum made?
Sent from my LGLS990 using Tapatalk
awesome glad you're working on it!
Nice job @clark44 thanks for this
Can anyone confirm bluetooth is working? I would so use yhis as my daily driver, but previous builds with no bluetooth have made my G Watch a vegetable lol so Ive been going back and forth between CM12 and stock. If theres a fix like mentioned above, could someone post a link? I cant seem to find it.
Anyone having trouble connecting to their network? It connect for me when first booted but loses all signal after a few seconds
Cleanser2012 said:
Anyone having trouble connecting to their network? It connect for me when first booted but loses all signal after a few seconds
Click to expand...
Click to collapse
Yes
Bluetooth isnt working for me but wifi seems to be fine.
Yeah I second the sprint network not working. It gets roaming signal but not sprint signal. Also its not recognizing my SD card. Anyone else notice this?
Bluetooth works for me GPS is way off tho
Sent from my LGLS990 using Tapatalk
randyrampage609 said:
Bluetooth works for me GPS is way off tho
Sent from my LGLS990 using Tapatalk
Click to expand...
Click to collapse
Did u wipe data before flashing because I didnt
Cjay1518 said:
Did u wipe data before flashing because I didnt
Click to expand...
Click to collapse
Did normal wipe
Sent from my LGLS990 using Tapatalk
Is anyone able to get android wear to connect?
It's not working for me.
I didn't wipe system and able to get data
Related
I present you my private slim builds.
It's pure stock slim with full -O3 support.
Features:
Rom - linaro 4.8
Kernel - linaro 4.8
JustArchi optimizations
Official changelog:
SLIMROM
My changelog:
10-01-2015 Slim5.02: Latest source, used GCC 4.8 for rom and kernel.
14-12-2014 Slim5.0: Latest source: alpha 9, changed a lil bit flags, rom should be flawless now
09-12-2014 Slim5.0: Latest source: alpha 8
01-12-2014 Slim5.0: Latest source: alpha 6
27-11-2014 Slim5.0: Latest source: alpha 5, fixed playstore.
24-11-2014 Slim5.0: Latest source: alpha 4, full -O3 included, some icons in google play are glitchy. Linaro 4.8
22-11-2014 Slimpop: Latest source: alpha 3
13-11-2014 Slimpop: Latest source: alpha 2
Bugs:
You tell me (it's alpha)
Gapps force close = reflash gapps without wipes (u wont lose accounts etc).
Installation:
moving from another rom? do full wipe before flashing
moving from previous versions of slim5.0 (built by me/official/sb else)? Just install, no wipes required.
having system crashes etc. - full wipe
gapps force close - reflash gapps
for root access, flash SuperSU
Download:
Slim 5.0
Slim5.02 10-01-2015
Credits:
Slimroms.net
JustArchi optimizations
Linaro
@TheLoonyBin
Source:
Slim5.0
How to build:
You need 64bit linux, I use Manjaro based on Arch
Follow this turorial (Ubuntu based): Ubuntu
Follow this turorial (Arch based): Arch
Sync source: repo init -u git://github.com/SlimRoms/platform_manifest.git -b lp5.0 && repo sync
Initialize building environment to bash: . build/envsetup.sh
Try to build, it should download device source: time brunch slim_hammerhead-userdebug
After downloading device tree u can stop compilation process
Go to slim_folder/.repo/local_manifests and replace it with following code:
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<!-- Removals -->
<remove-project name="platform/external/webp" />
<remove-project name="SlimRoms/android_build" />
<!-- Slim device and kernel source -->
<project name="SlimRoms/device_lge_hammerhead" path="device/lge/hammerhead" remote="github" revision="lp5.0" />
<project name="SlimRoms/kernel_lge_hammerhead" path="kernel/lge/hammerhead" remote="github" revision="lp5.0" />
<!-- My choice, usually these repos are ahead of default ones -->
<project name="JustArchi/android_external_webp" path="external/webp" remote="github" revision="cm-11.0" />
<project name="TheLoonyBin/proprietary_vendor_lge" path="vendor/lge" remote="github" revision="lp5.0" />
<project name="TheLoonyBin/proprietary_vendor_qcom" path="vendor/qcom" remote="github" revision="lp5.0" />
<project name="TheLoonyBin/proprietary_vendor_broadcom" path="vendor/broadcom" remote="github" revision="lp5.0" />
<project name="ArchiDroid/Toolchain" path="prebuilts/gcc/linux-x86/arm/arm-linux-androideab-4.8Li" remote="github" revision="linaro-4.8-arm-linux-androideabi" />
<!-- My repos, fixes, patches etc -->
<project name="xenuPL/android_build" path="build" remote="github" revision="lp5.0" />
</manifest>
Clean all stuff: make clean
Wipe ccache: rm -rf ~/.ccache
Build rom: brunch hammerhead -jx (x-number of cores)
Awesome ~ will give it a flash later on here goes my weekend :victory:
Hellz yah !! Thank you Brother for dropping some fresh new dope !!
Time to whip out the ye ole' TWRP syringe and slam this potent goodness in my phone-arm!!
Thanks again brother for the f¡x !!
��
This is awesome - super stable too. Thanks man!
I'd love to see someone do some AOSPA builds in the future.
Oh I will try both of them downloading.....:silly:
Got aospa sources, but i need to fix some stuff. Will try to build it this week.
Omni build running smooth with Linaro r59. I'd love to see the CarbonROM with the Archi optimizations too if you can.
New slim
satyr007, great work!
These optimizations, are really great, I updated Omni to latest official and now i see how your build was faaast.
I wish these were the daily Omni builds
Cheers!
Great job feels snappier slim
new omni
This Omni rom works fine.
I'm testing the Kernel Big-Bum CM.and I think the results are positive.Sorry,I can not upload screenshots.
Tested Omni rom and it's blazing fast. Went back to PA stock because I need it's features. Hope that OP will manage to do a PA version. Thank you for bringing forth these tweaks for our hammerhead.
Please post a mirror.. mega is blocked in my country. thanx in advance
Any Chance for an optimized Mahdi Rom? Tested your Slim Version and was impressed. But Mahdi gives me more options..
Sent from my LG-V500 using XDA Free mobile app
Slim download not available
peluillo said:
Slim download not available
Click to expand...
Click to collapse
Working now :good:
@satyr007 check pm.
latest slim 7.2.1
First AOSPA build. I will build only these 3 roms from time to time (once a week or two)
Hey guys, so I finally got my hands on S3 and the Stock ROM on this is 4.3 and so out-dated now and it lags when I install many apps. I was planning on installing CM 11 official but it has got some bugs. Can someone please suggest a stable ROM without any bugs and good battery life? Lollipop or Kit-Kat whatever ROM you think is great.
<b><font color="Red">Questions? Use Q&A!</font></b><br />
<br />
<b><font color="RoyalBlue">Build 12 Download: MEGA | XDA</font></b><br />
<br />
<b><font color="DarkBlue">Suggested GAPPS</font></b><br />
<b><font color="DarkBlue">Other GAPPS</font></b><br />
<br />
<font color="Blue">Changelog:</font><br />
<br />
Build 12<br />
- Went back to closed-source sensors, as open-source ones aren't working completely perfect yet<br />
- Fixed netflix, it should work properly now<br />
- Updated sources<br />
Build 11<br />
- Increased earpiece volume slightly, as it was barely heard outdoor<br />
- Fixed SELinux derps introduced in B10 (sysfs denials)<br />
- Fixed more SELinux denials related to recently changed parts (open-source sensors & bluetooth)<br />
- KERNEL: Fixed dm-crypt not accepting discard requests which resulted in failed encryption (CM10.2 regression)<br />
- Updated sources<br />
Build 10<br />
- Fixed (compass) and reintroduced open-source sensors<br />
- Misc SELinux updates<br />
- Misc hwcomposer fixes and improvements<br />
- Updated sources<br />
- Android 5.1.1 revision 6 (LMY48G)<br />
- Probably other things that I forgot already<br />
Build 9<br />
- Our CM sources have been rebased and resynced to fix derps and other misc issues<br />
- Fixed most (if not all) hardware encoder/decoder issues<br />
- Improved stability, compatibility, battery life and performance drastically while encoding/decoding movies<br />
- hwcomposer improvements and fixes<br />
- Wi-Fi firmware updates & cleanup<br />
- Updated sources<br />
Build 7<br />
- Fixed mobile networks search (for good this time)<br />
- Various kernel cleanups & stability improvements<br />
- Added proper touchkey backlight support. They don't light up on screen touch anymore (stock behaviour)<br />
- Hopefully fixed Wi-Fi dropouts during night<br />
- Updated sources<br />
Build 6<br />
- Fixed mobile networks search<br />
- Various kernel cleanups & stability improvements<br />
- Updated sources<br />
Build 5<br />
- Kernel: Various improvements, zRAM should be more responsive now.<br />
- RIL: Fixed & Updated Exynos4RIL java class, long shutdown issue resolved<br />
- Updated sources<br />
Build 4<br />
- Android 5.1.1<br />
- Kernel: Changed version type to -CM-ArchiKernel-base, hope you won't mix it up with AK now<br />
- Kernel: Does not include BFQ anymore, CFQ is default.<br />
- Updated sources<br />
Build 3<br />
- Major updates to RIL (again)<br />
- ArchiKernel: Haptic: Made get() and store() consistent<br />
- Updated sources<br />
Build 2<br />
- Major updates to RIL client (V11)<br />
- Updated i9300 RIL header (V11)<br />
- Major updates to RIL blobs (XXUGOA2)<br />
- Network settings FC fixed<br />
- MMSes fixed<br />
- Sensors fixes<br />
- Added vibration intensity to stock kernel<br />
- Updated sources<br />
Build 1<br />
- Initial release<br />
- Everything what worked in CM12.0 should work, too<br />
- Fast overview: HWC, RIL, Wi-FI, RIL, Sensors, Camera are fine, rest is untested<br />
- MMSes not yet fixed (known bug from CM12.0)<br />
<br />
<br />
<b>Background:</b><br />
Due to lack of official maintainer for i9300 device for CyanogenMod. I, together with @Moster2 decided that we will work unofficially on i9300 device tree for CM12, to bring Lollipop goodness to our beloved Galaxy S3.<br />
All builds provided in this thread are <b>UNOFFICIAL</b>, which means that:<br />
- There is no official support for i9300<br />
- There are no OTAs available<br />
- There are no automated "nightglies"<br />
<br />
At some point, we definitely will try to make proper pull requests, and maybe even support CM12 officially, but at the moment this project is in WIP - Work-In-Progress state, and many things are still broken/unusable. Until we finish, all builds are unofficial, and proper device support is not finished yet.<br />
<br />
At the moment, this project is considered: <b><font color="green">BETA</font></b>. All core functions <b>should work</b>, ROM <b>shouldn't have any critical issues</b>, but it's <b>still not ready to mark as stable</b>. However, it <b>should work properly as daily driver</b>.<br />
<br />
<b><font color="red">Please refrain from talking about other kernels than stock. We can't track every kernel and it's problems, hence, you're using other kernels at your own risk. Please don't report bugs while you're using custom kernels.</font></b><br />
<br />
Main developers:<br />
<b>- JustArchi<br />
- Moster2</b><br />
<br />
Thanks to:<br />
<b>- dhiru1602<br />
- arter97<br />
</b><br />
<br />
<b>Current issues</b><br />
<b>Manifest / Sources</b><br />
<br />
We work on this project for <b><font color="green">FREE</font></b>. While not mandatory, donations encourage us to continue to do so, and we'd deeply appreciate them, if you feel generous.<br />
<br />
<b>Donate to JustArchi</b><br />
<br />
Build instructions:<br />
Follow <b>CM build instructions for i9300</b>. When doing <b>repo init</b>, don't forget to <b>declare CM-12.1</b> branch (-b cm-12.1) instead of the default one. <br />
<br />
Before "breakfast i9300", you must include our manifest and resync the sources:<br />
<br />
croot<br />
cd .repo<br />
mkdir -p local_manifests<br />
cd local_manifests<br />
wget https://raw.githubusercontent.com/ArchiDroid/manifest/cm-12.1/roomservice.xml<br />
croot<br />
repo sync<br />
Click to expand...
Click to collapse
<br />
<br />
<b>Notice:</b> Our manifest already includes proprietary_vendor_samsung, so <b>don't execute ./extract-files.sh</b>. Just repo sync.<br />
<br />
Then follow "breakfast i9300" and the rest of the commands in original instructions, while keeping in mind above notice.<br />
<br />
<b><u>XDAevDB Information</u></b><br />
<b>[5.1.1] [Build 12] [BETA] [2015-07-18] CyanogenMod 12.1 for i9300, ROM for the Samsung Galaxy S III I9300</b><br />
<br />
<b><u>Contributors</u></b><br />
JustArchi, Moster2, arter97 <br />
<b>Source Code:</b> https://github.com/ArchiDroid<br />
<br />
<b>ROM OS Version:</b> 5.1.x Lollipop<br />
<b>ROM Kernel:</b> Linux 3.0.x<br />
<b>Based On:</b> CyanogenMod 12.1<br />
<br />
<b><u>Version Information</u></b><br />
<b>Status:</b> Beta<br />
<br />
<b>Created</b> 2015-03-29<br />
<b>Last Updated</b> 2015-07-17
Gesendet von meinem GT-I9300 mit Tapatalk
heartbrake said:
Hey guys, so I finally got my hands on S3 and the Stock ROM on this is 4.3 and so out-dated now and it lags when I install many apps. I was planning on installing CM 11 official but it has got some bugs. Can someone please suggest a stable ROM without any bugs and good battery life? Lollipop or Kit-Kat whatever ROM you think is great.
Click to expand...
Click to collapse
I think that every ROM including factory stock will have one or two bugs.
However, the three ROMs that I like most ATM are:
DN4 KK 4.4.4 based (do make sure to upgrade to Boeffla 7.6 kernel) - no very recent updates but Lollipop UI mod is available in the Themes section (IMO the ROM performs better without it) For me this has been the most solid KK 4.4.4 ROM
Amcha v6.10 - KK4.4.4 - a great ROM all round IMO based on S3 LTE firmware
Blekota Note 4 lite also KK 4.4.4 based - very good ROM with Lollipop UI, hints of S6 and pretty frequent updates
Try this one -
[ROM][GT-I9300][KK 4.4.4]?S5 Sensation ROM™ v11.0?[AROMA][OTA][MAY05,2015] - excellent rom
or qaraqumus ROMs (4.3 or 4.4)
You won't regret...
Try ArchiDroid...
heartbrake said:
Hey guys, so I finally got my hands on S3 and the Stock ROM on this is 4.3 and so out-dated now and it lags when I install many apps. I was planning on installing CM 11 official but it has got some bugs. Can someone please suggest a stable ROM without any bugs and good battery life? Lollipop or Kit-Kat whatever ROM you think is great.
Click to expand...
Click to collapse
Hi,
After 15 month of experience, what I can higly recommend to you is ArchiDroid. This soft has two versions: AD 1.X (based on stock Android 4.3) and AD 2.X (3.X actually, based on pure CM 12 with magnificent speed & fluidity optimizations). Today a STABLE version of the former one is going to be released, however experimental version which has beeing developed for a few months is far more stable than most LP based ROMs. So you can choose between Android 4.3 and 5.1.1. Want KitKat CM 11 ? You can also have it - you need to download STABLE version of ArchDroid 3.0.2 from the end of 2014. It is not updated any more and got an annoying bug from google (constant FC of Google Play Services app) nowdays, but you can easily find a solution within following links.
Why ArchiDroid ? It's developer put utmost pressure on reliability and quality. No compromises. This is the reason of creation of two version of his soft. Version 1.X is best when your highest priority is compatibility (for example BT headsets), stability and battery. Version 2.X is demon of speed. Beleve me - I used version 1.X quite a long time, being accustomed to stock interface and not so keen on big experiments. When I finally flashed version 2.X, the difference with fluidity and smoothness was so great... I use this version till this moment and prepare to switch to Lollipop (AD 3.1 STABLE). This version is claimed by his creator to be even faster and smoother than KK version (3.0.2). This soft is really stable, fast and battery friendly. Many optimizations means for example, that you can forgot about ads - ad blocking is just implemented in ArchiDroid. What else - using my mobile with some tuning (tasker, greenify, lux) and not gaming - just internet, mail, chat, music - I have everage SOT between 3,5 and 5 h. With great speed of this soft (no lags and difference in speed after half a year w/o reflashing)...
Aha, more than year before, hesitating which ROM will be the best choice for me, I tested as far as I remember 3 or 4 best ranked ROMs. And decided to choose AD - with no doubts.
Here you have the link to AD 2.X (3.X) thread. In a few post at the beginning you will find FAQ Q/A post - read it, it's worth it.
http://forum.xda-developers.com/galaxy-s3/development/rom-archidroid-v2-4-6-power-hands-t2354859
good luck !
The best one is Archidroid 3.X . It's fast,light and has many optimizations and far more stable than many LP roms.
http://forum.xda-developers.com/galaxy-s3/development/rom-archidroid-v2-4-6-power-hands-t2354859
HeartBrake, Did you try any of the ROM's mentioned here or other. I am also in a similar situation and landed upon this thread. I have recently rooted my Galaxy S3 I9300, and currently have 4.3. I am also looking for a ROM which will give me good battery life and better connectivity. I am facing mobile connectivity issues frequently nowadays.
What's the main bug with Archidroid 2.x? I'm using Archidroi 1.x at the moment but fancy a play with an AOSP rom. Can it be used on an unrooted phone? I have one phone rooted, but need an unrooted phone for Barclays mobile banking app.
Hey i am new here and i am searching for a good custom rom currently iam running on android revolution with boeffla kernel runs very well but i would like something slimmer and without aroma stable and bugless would be nice too hope someone can help me
Device GT-I9300
For those that don't know what Evervolv is, Evervolv is an AOSP (Android Open Source Project) rom aimed at Snapdragon powered devices. We're fully open sourced and encourage it with no restrictions. The work put into this rom is community driven and and Evervolv Project is made up of numerous members and contributors.
If you would like to contribute to Evervolv, please visit our Gerrit Code Review.
Current version: Based off 6.0.1 Marshmallow)
Features:
Extended PowerMenu
Battery %,
Volume button music control.
Trackball Wake (Available on devices with a trackball/pad)
CM Theme manager
ability to turn all customization off with one switch in the toolbox, giving you 100% aosp look and feel.
eng builds (instead of userdebug like everyone else) providing more open experience (ie adb root by default)
full complement of commandline tools (busybox, vim, ssh, curl/wet with ssl support!)
custom updater written from scratch by Preludedrew and Texasice, featuring automatic update checks,
support for downloading gapps, and advanced automatic install (TWRP and CWM supported but TWRP preferred)
Bug Reporting:
Please provide the following info:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
Please use EVPaste to post your logs.
Downloads:
7-4 Build
Source:
Evervolv Github
Device Tree
Tab A common tree
MSM8916-common tree
Kernel Source
Changelog:
View the recent changes at Evervolv Gerrit
Donations:
If you wish to donate please do so here (Paypal)
What's working:
Touchscreen
Power, Home, Recents, Back buttons
Wifi
Bluetooth
Camera
Sensors
GPS
Storage's (internal, external, adoptable storage)
Bugs/Not Working:
Initial setup takes a while to initialize
Audio
Video/DRM
Offline charging
Playstore downloads old app versions
How to flash a Rom properly?
Make sure you are using Lollipop Firmware or your touch will be flipped we are activily working on supporting the Marshmallow firmware
Copy the rom and gapps to your tablet
Boot into your custom recovery
OPTIONAL make a backup of your current running rom and store it on your MicroSD-Card or on your PC/Laptop
Wipe dalvik cache
Wipe/format system
Wipe/format data
Flash rom
Flash gapps
Reboot and give your device some time to do it's first boot!
In case someone likes to compile on their own:
You need to setup Linux first, good tutorial here:
Ubuntu / Xubuntu:
- https://nathanpfry.com/how-to-prepar...-android-roms/
- https://nathanpfry.com/how-to-setup-...-android-roms/
- https://nathanpfry.com/how-to-set-up...-android-roms/
- https://nathanpfry.com/how-to-setup-...-android-roms/
Arch based Linux ready to go:
- BBQLinux by @codeworkx http://bbqlinux.org/
Once you have synced Evervolv source run the following in terminal:
Code:
mkdir -p .repo/local_manifests
nano .repo/local_manifests/local_manifest.xml
Add the following to your local_manifest.xml:
Code:
<?xml version="1.0" encoding="UTF-8"?>
-<manifest>
<project revision="mm-6.0" remote="github" path="vendor/samsung" name="Evervolv/android_vendor_samsung"/>
<project revision="mm-6.0" remote="github" path="hardware/samsung" name="Evervolv/android_hardware_samsung"/>
<project revision="mm-6.0" remote="github" path="kernel/samsung/msm8916" name="Evervolv/android_kernel_samsung_msm8916"/>
<project revision="mm-6.0" remote="github" path="device/samsung/qcom-common" name="Evervolv/android_device_samsung_qcom-common"/>
<project revision="mm-6.0" remote="github" path="device/samsung/msm8916-common" name="Evervolv/android_device_samsung_msm8916-common"/>
<project revision="mm-6.0" remote="github" path="device/samsung/gt5-common" name="Evervolv/android_device_samsung_gt5-common"/>
<project revision="mm-6.0" remote="github" path="device/samsung/gt510wifixx" name="Evervolv/android_device_samsung_gt510wifixx"/>
<project revision="mm-6.0" remote="github" path="device/samsung/gt58wifixx" name="Evervolv/android_device_samsung_gt58wifixx"/>
<project revision="mm-6.0-8916" remote="github" path="hardware/qcom/audio-caf/msm8916" name="Evervolv/android_hardware_qcom_audio-caf"/>
<project revision="mm-6.0-8916" remote="github" path="hardware/qcom/display-caf/msm8916" name="Evervolv/android_hardware_qcom_display-caf"/>
<project revision="mm-6.0-8916" remote="github" path="hardware/qcom/media-caf/msm8916" name="Evervolv/android_hardware_qcom_media-caf"/>
<project revision="mm-6.0-caf" remote="github" path="hardware/qcom/bt-caf" name="Evervolv/android_hardware_qcom_bt"/>
<project revision="mm-6.0-caf" remote="github" path="hardware/qcom/wlan-caf" name="Evervolv/android_hardware_qcom_wlan"/>
</manifest>
Save the file.
Back in terminal:
Code:
repo sync
. build/envsetup.sh
lunch gt510wifixx
make otapackage
(you can replace gt510wifixx with gt58wifixx if you like to build for the Galaxy Tab A 8.0 WIFI (SM-T350)
Great work man, happily waiting for lte support to get this great cheap tab bloadware-free:highfive:
Hello, this ROM is also compatible with the version Galaxy Tab A SM-T550? Thank y
pickmod said:
Hello, this ROM is also compatible with the version Galaxy Tab A SM-T550? Thank y
Click to expand...
Click to collapse
Umm not trying to sound like a jerk here but doesn't the title of the thread say it's for the Samsung Tab SM-T550?
---------- Post added at 18:02 ---------- Previous post was at 18:00 ----------
What about the Samsung Tab A 8.0 (SM-T350)? Will it work? Would love to flash it. ?
alias4ever said:
Umm not trying to sound like a jerk here but doesn't the title of the thread say it's for the Samsung Tab SM-T550?
---------- Post added at 18:02 ---------- Previous post was at 18:00 ----------
What about the Samsung Tab A 8.0 (SM-T350)? Will it work? Would love to flash it.
Click to expand...
Click to collapse
have a look here
http://forum.xda-developers.com/andr...-t350-t3411150
@deadman96385:
First of all many apreciate for your hard work, you didn`t give up just like me^^
Will it be possible to compile pure cm with your repos?
Just saw that you updated the branches...
Will both Galaxy-Tab-A and Evervolv repos be updated?
Maybe you can add a how-to of flash for some new users just like that: https://andi34.github.io/faq.html
And some additional informations later like here :http://forum.xda-developers.com/galaxy-tab-2/galaxy-tab-2-unified/rom-cyanogenmod-13-cm13-0-t3303798
Thanks @Android-Andi
This is not meant to be some kind of criticism, just wanna support this device thread
alias4ever said:
What about the Samsung Tab A 8.0 (SM-T350)? Will it work? Would love to flash it.
Click to expand...
Click to collapse
Here is Evervolv for the T350
http://forum.xda-developers.com/android/development/rom-evervolv-galaxy-tab-sm-t350-t3411150
Chemnitzer said:
have a look here
http://forum.xda-developers.com/andr...-t350-t3411150
@deadman96385:
First of all many apreciate for your hard work, you didn`t give up just like me^^
Will it be possible to compile pure cm with your repos?
Just saw that you updated the branches...
Will both Galaxy-Tab-A and Evervolv repos be updated?
Maybe you can add a how-to of flash for some new users just like that: https://andi34.github.io/faq.html
And some additional informations later like here :http://forum.xda-developers.com/galaxy-tab-2/galaxy-tab-2-unified/rom-cyanogenmod-13-cm13-0-t3303798
Thanks @Android-Andi
This is not meant to be some kind of criticism, just wanna support this device thread
Click to expand...
Click to collapse
It should be possible to build cm with the repos but i have not tried it yet, the Galaxy-Tab-A org will be were i test things out and once its stable it will be merged on to the Evervolv repos. I will add some of the info you mentioned
Edit: 3rd post now has install instructions and a compile guide
deadman96385 said:
Here is Evervolv for the T350
http://forum.xda-developers.com/android/development/rom-evervolv-galaxy-tab-sm-t350-t3411150
It should be possible to build cm with the repos but i have not tried it yet, the Galaxy-Tab-A org will be were i test things out and once its stable it will be merged on to the Evervolv repos. I will add some of the info you mentioned
Click to expand...
Click to collapse
Just figured that some of your source links are not working
Chemnitzer said:
Just figured that some of your source links are not working
Click to expand...
Click to collapse
Fixed there was an extra " on a couple of them
Very cool, hope you support tgphe LTE version soon.
Gesendet von meinem SM-T555 mit Tapatalk
Blindie said:
Very cool, hope you support tgphe LTE version soon.
Gesendet von meinem SM-T555 mit Tapatalk
Click to expand...
Click to collapse
Will be added by deadman in time, have Seen it in beta repo already so work is in progress:victory:
omfg finally someone did it! thank you so much!
---------- Post added at 10:42 PM ---------- Previous post was at 10:10 PM ----------
Just found a bug: the touch is upside down. i think it is due to the new marshmallow bootloader, because ashyx had the same problem with the twrp recovery
hellcat50 said:
omfg finally someone did it! thank you so much!
---------- Post added at 10:42 PM ---------- Previous post was at 10:10 PM ----------
Just found a bug: the touch is upside down. i think it is due to the new marshmallow bootloader, because ashyx had the same problem with the twrp recovery
Click to expand...
Click to collapse
Is it reversed in twrp/system/Both?
What twrp are you Using?
Made a clean Flash?
alias4ever said:
Umm not trying to sound like a jerk here but doesn't the title of the thread say it's for the Samsung Tab SM-T550?
---------- Post added at 18:02 ---------- Previous post was at 18:00 ----------
What about the Samsung Tab A 8.0 (SM-T350)? Will it work? Would love to flash it.
Click to expand...
Click to collapse
I'm so sorry! I meant if it is compatible with the version Tab A SM-P500 ?!?! Thank you!
pickmod said:
I'm so sorry! I meant if it is compatible with the version Tab A SM-P500 ?!?! Thank you!
Click to expand...
Click to collapse
I doubt it is compatible with P500 but it is worth a shot
Chemnitzer said:
Is it reversed in twrp/system/Both?
What twrp are you Using?
Made a clean Flash?
Click to expand...
Click to collapse
No, ashyx fixed it in the recovery. Before the fix the same was present in the twrp
I'm using twrp 3.0.2.1
hellcat50 said:
No, ashyx fixed it in the recovery. Before the fix the same was present in the twrp
I'm using twrp 3.0.2.1
Click to expand...
Click to collapse
Chemnitzer said:
Is it reversed in twrp/system/Both?
What twrp are you Using?
Made a clean Flash?
Click to expand...
Click to collapse
You are correct currently you need to have lollipop firmware installed we our actively working on the kernel to support the M firmware. I have also added a note in the install instructions about it.
deadman96385 said:
You are correct currently you need to have lollipop firmware installed we our actively working on the kernel to support the M firmware. I have also added a note in the install instructions about it.
Click to expand...
Click to collapse
Can I downgrade the firmware without bricking the device?
And what about the bootloader?
nevermind, downgraded and now the touch works. hopefully the other existing issues will be fixed soon
Just found another issue: the rotation doesn't work after sometime using the tablet. After a reboot it's working again until it stops working again.
For those that don't know what Evervolv is, Evervolv is an AOSP (Android Open Source Project) rom aimed at Snapdragon powered devices. We're fully open sourced and encourage it with no restrictions. The work put into this rom is community driven and and Evervolv Project is made up of numerous members and contributors.
If you would like to contribute to Evervolv, please visit our Gerrit Code Review.
Current version: Based off 6.0.1 Marshmallow)
Features:
Extended PowerMenu
Battery %,
Volume button music control.
Trackball Wake (Available on devices with a trackball/pad)
CM Theme manager
ability to turn all customization off with one switch in the toolbox, giving you 100% aosp look and feel.
eng builds (instead of userdebug like everyone else) providing more open experience (ie adb root by default)
full complement of commandline tools (busybox, vim, ssh, curl/wet with ssl support!)
custom updater written from scratch by Preludedrew and Texasice, featuring automatic update checks,
support for downloading gapps, and advanced automatic install (TWRP and CWM supported but TWRP preferred)
Bug Reporting:
Please provide the following info:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
Please use EVPaste to post your logs.
Downloads:
7-9 Build
Source:
Evervolv Github
Device Tree
Tab A common tree
MSM8916-common tree
Kernel Source
Changelog:
View the recent changes at Evervolv Gerrit
What's working:
Touchscreen
Power, Home, Recents, Back buttons
Wifi
Bluetooth
Sensors
GPS
Storage's (internal, external, adoptable storage)
Bugs/Not Working:
Mobile Data/Calling/Messagaing
Initial setup takes a while to initialize
Audio
Video/DRM
Camera
Offline charging
Playstore downloads old app versions
How to flash a Rom properly?
Make sure you are using Lollipop Firmware or your touch will be flipped we are activily working on supporting the Marshmallow firmware
Copy the rom and gapps to your tablet
Boot into your custom recovery
OPTIONAL make a backup of your current running rom and store it on your MicroSD-Card or on your PC/Laptop
Wipe dalvik cache
Wipe/format system
Wipe/format data
Flash rom
Flash gapps
Reboot and give your device some time to do it's first boot!
In case someone likes to compile on their own:
You need to setup Linux first, good tutorial here:
Ubuntu / Xubuntu:
- https://nathanpfry.com/how-to-prepar...-android-roms/
- https://nathanpfry.com/how-to-setup-...-android-roms/
- https://nathanpfry.com/how-to-set-up...-android-roms/
- https://nathanpfry.com/how-to-setup-...-android-roms/
Arch based Linux ready to go:
- BBQLinux by @codeworkx http://bbqlinux.org/
Once you have synced Evervolv source run the following in terminal:
Code:
mkdir -p .repo/local_manifests
nano .repo/local_manifests/local_manifest.xml
Add the following to your local_manifest.xml:
Code:
<?xml version="1.0" encoding="UTF-8"?>
-<manifest>
<project revision="mm-6.0" remote="github" path="vendor/samsung" name="Evervolv/android_vendor_samsung"/>
<project revision="mm-6.0" remote="github" path="hardware/samsung" name="Evervolv/android_hardware_samsung"/>
<project revision="mm-6.0" remote="github" path="kernel/samsung/msm8916" name="Evervolv/android_kernel_samsung_msm8916"/>
<project revision="mm-6.0" remote="github" path="device/samsung/qcom-common" name="Evervolv/android_device_samsung_qcom-common"/>
<project revision="mm-6.0" remote="github" path="device/samsung/msm8916-common" name="Evervolv/android_device_samsung_msm8916-common"/>
<project revision="mm-6.0" remote="github" path="device/samsung/gt5-common" name="Evervolv/android_device_samsung_gt5-common"/>
<project revision="mm-6.0" remote="github" path="device/samsung/gt510ltexx" name="Galaxy-Tab-A/android_device_samsung_gt510ltexx"/>
<project revision="mm-6.0" remote="github" path="device/samsung/gt510wifixx" name="Evervolv/android_device_samsung_gt510wifixx"/>
<project revision="mm-6.0" remote="github" path="device/samsung/gt58wifixx" name="Evervolv/android_device_samsung_gt58wifixx"/>
<project revision="mm-6.0-8916" remote="github" path="hardware/qcom/audio-caf/msm8916" name="Evervolv/android_hardware_qcom_audio-caf"/>
<project revision="mm-6.0-8916" remote="github" path="hardware/qcom/display-caf/msm8916" name="Evervolv/android_hardware_qcom_display-caf"/>
<project revision="mm-6.0-8916" remote="github" path="hardware/qcom/media-caf/msm8916" name="Evervolv/android_hardware_qcom_media-caf"/>
<project revision="mm-6.0-caf" remote="github" path="hardware/qcom/bt-caf" name="Evervolv/android_hardware_qcom_bt"/>
<project revision="mm-6.0-caf" remote="github" path="hardware/qcom/wlan-caf" name="Evervolv/android_hardware_qcom_wlan"/>
</manifest>
Save the file.
Back in terminal:
Code:
repo sync
. build/envsetup.sh
lunch gt510ltexx
make otapackage
Great Work for this!
Any plans for CM-13.0?
Chemnitzer said:
Great Work for this!
Any plans for CM-13.0?
Click to expand...
Click to collapse
Once the bugs are worked out i will work on cm-13.0
deadman96385 said:
Once the bugs are worked out i will work on cm-13.0
Click to expand...
Click to collapse
"Evervolv/android_device_samsung_gt510ltexx" is missing on github
Chemnitzer said:
"Evervolv/android_device_samsung_gt510ltexx" is missing on github
Click to expand...
Click to collapse
Fixed sorry about that its currently on my Galaxy Tab A org for now https://github.com/Galaxy-Tab-A/android_device_samsung_gt510ltexx
Auto standby is not working. In stock Rom, display goes of when LiD of cover is closed and goes back on when LiD is lifted.
Good job!
Thanks for this!:highfive:
Chemnitzer said:
Auto standby is not working. In stock Rom, display goes of when LiD of cover is closed and goes back on when LiD is lifted.
Click to expand...
Click to collapse
It is on the to-do list i will add a few potential fixes that might fix it, but i do not currently have a smart cover yet.
Hello! First I want to thank you for your work! I just installed the Rom, but not just opened, it stays hanging around with the sign Evervolv, screen saying that you are loading applications and then again Evervolv and so I get an hour without change. That may be, as I fix it? Thank you!
dodka said:
Hello! First I want to thank you for your work! I just installed the Rom, but not just opened, it stays hanging around with the sign Evervolv, screen saying that you are loading applications and then again Evervolv and so I get an hour without change. That may be, as I fix it? Thank you!
Click to expand...
Click to collapse
You made a clean flash?
Are you running latest twrp?
Sorry for Late reply
Chemnitzer said:
You made a clean flash?
Are you running latest twrp?
Sorry for Late reply
Click to expand...
Click to collapse
Yes, i made clean flash and i have instaled latest TWRP.
dodka said:
Yes, i made clean flash and i have instaled latest TWRP.
Click to expand...
Click to collapse
Which Version?
I use latest from ashyx and no issue like that
https://www.androidfilehost.com/?fid=24499762635999217
Also make an advanced wipe, not only factory reset
After wipe, you shouldt directly reboot into recovery and allow modifications.
Last, install Both ROM and Recovery WITHOUT Reboot
You surely own a sm-t555/ GT510LTE? (only to be sure)
I managed to install the Rom, but can not find the gapps. From where I have to download? Thank you!
dodka said:
I managed to install the Rom, but can not find the gapps. From where I have to download? Thank you!
Click to expand...
Click to collapse
http://opengapps.org/
You need arm version for android 6.0 in whatever variant you prefer.
Remember to install gapps together with rom BEFORE Reboot and First Boot of ROM
@deadman96385
Hows the progress on Rom?
Best let people work in peace, I'm sure they are progressing and will soon have another update of this interesting Rom.
I have managed to fork deadmans device tree to cm-13.0 for gt510lte.
If somebody is interrested in just pm me.
I will not start an own thread for this until it is proper booting.
Any support is welcome
any members interested in cm development may check my forum: http://forum.xda-developers.com/and...-t550-t555-t3449597/post68407172#post68407172
WIP CM14.1 FOR THOSE WHO ARE INTERESTED.
Hi guys, this is CyanogenMod 13 for GT-I8190 ported from this ROM for T599 by @Meticulus
WARNING: I'M NOT RESPONSIBLE FOR BRICKED DEVICES, PLEASE BACKUP EVERYTHING BEFORE TESTING THIS! DON'T USE AS A DAILY DRIVER IF YOU ARE ALLERGIC TO BUGS! ALSO, NO F2FS SUPPORT (YET)
Flashing Instructions (if coming from another rom or old CM13 builds before 11/22):
Make a nandroid Backup (seriously)
Wipe System, Data, and Cache
Flash ROM (TWRP 2.8+ recommended)
Flash GApps
Flash Keyboard Fix
To Flash an update just flash it in recovery and reboot back (and clear dalvik cache and cache)
What works:
Booting
Wifi
Wifi Hotspot
Bluetooth
MTP
Screen
RIL
Buttons
Sound (speaker, headphone jack, bluetooth audio, and microphone)
Camera (Taking Pictures and Videos)
GPS
Sensors
Offline Charging
USB OTG (fully) (see this post)
FM Radio (use the li_131227.apk in this post)
Issues:
Screencast
Screenshot doesn't work in TWRP 3.0.2-0
And more
Tips for performance:
Install "Kernel Adiutor" or "No-frills CPU Control" then set cpu governor to abyssplug and set io scheduler to sio.
Set animation scales in developer options to 0.5x
Don't install "fake" cleaning apps such as Task Killers, Clean Master, DU Battery Saver, etc. (you know why)
Use Greenify to make phone even more smoother (and enable Agressive Doze to have doze mode in rom)
Clear the recent tasks list often to free CPU usage and memory.
NOTES:
F2FS isn't supported by the ROM
And neither is Adoptable Storage nor Encryption
Download Links:
ROM
Stable TWRP 3.0.2-0 build + source (based on NovaFusion + Android-Andi's sources) <- Flash with Heimdall/TWRP 3.x
Keyboard FixKeyboard Fix (thanks @Master_TC)
Gapps (use arm 6.0)
Device tree: https://github.com/3liteking148/android_device_samsung_golden
Kernel: https://github.com/3liteking148/android_kernel_samsung_golden
Vendor: https://github.com/3liteking148/android_vendor_samsung_golden
.repo/local_manifests/local_manifests.xml:
Code:
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<project name="LineageOS/android_external_stlport" remote="github" path="external/stlport" revision="cm-13.0" />
<project name="3liteking148/android_device_samsung_golden" path="device/samsung/golden" remote="github" revision="cm-13.0"/>
<project name="3liteking148/android_kernel_samsung_golden" path="kernel/samsung/golden" remote="github" revision="cm-13.0"/>
<project name="3liteking148/android_vendor_samsung_golden" path="vendor/samsung/golden" remote="github" revision="cm-13.0"/>
<project name="3liteking148/android_hardware_u8500" path="hardware/u8500" remote="github" revision="master"/>
</manifest>
Credits to Meticulus, Novafusion, and other devs who worked hard to bring up cm for u8420 chipset
Additional credits to @Android-Andi for the kernel.
Note: I'm a high school student not a full time developer
OMG + thank you for baking us
Cant wait to test it
how to Fix error Executing updater binary in zip
Crayvolt said:
how to Fix error Executing updater binary in zip
Click to expand...
Click to collapse
Oops I removed some useless files from the rom but forgot to reflect it on the updater-script
Uploading new version...
OK I'll wait thank you for baking
Crayvolt said:
OK I'll wait thank you for baking
Click to expand...
Click to collapse
already done uploading. also uploaded the modified version of f-kernel that wont give errors while flashing
OK Ill try now
After a long wait finally came the miracle.
Thanks @3liteking148
Sent from my GT-I8190 using XDA-Developers mobile app
So far I have tried it its awesome
Overclock 1150
mobile ril is working
Wifi is not working keep on searching
Bluetooth not working
Camera disconnect error
---------- Post added at 02:42 PM ---------- Previous post was at 02:39 PM ----------
Battery heat and drain
At least sound and picture and I can install app
hoping Wifi or camera will be fix soon
Thank you for baking MR. 3liteking148
Gapps 6.01 is working
Wow, I'm glad someone got this working... I wanted to do it but with out the device to test on it would be nearly impossible to get the details right...
Some notes:
1. You might get the wifi working by pulling /system/lib/modules/dhd.ko from a ROM built for your device and known to work with the above kernel.
2. You might get the camera working by pulling the /system/lib/hw/camera.*.so from and ROM built for this device and renaming it the same name as in the rom...
i'll wait for wifi working to test
Hey cravolt can I have some ss?
Sent from my GT-I8190 using XDA-Developers mobile app
Hi mr Meticulus , if u need a tester i'am ready to send you logs & all what's u need to make this rom better
Proof that it is working on
GT-I8190
MTP is working only when in Recovery but not on os
tried to port the dhd.ko file from Omni LP
Bake by Mr.Golden Guy but didnt work keeps on searching wifi also the camera error disconnect ported file from Omni LP
doesnt work
New update
Changelog:
fixed wifi by using dhd.ko from f_kernel zip
fixed bluetooth
fixed mtp (using meticulus' patch)
integrated f_kernel (no need to flash kernel)
attempted to fix camera but didn't work
Download Link (no need to flash kernel)
FLASH ABOVE THE LAST BUILD! DO NOT WIPE SYSTEM BEFORE FLASHING!
btw if someone knows how to fix the camera, here is a logcat: https://drive.google.com/open?id=0Bw4AfK_vJ7JyVlJtZEhxUEVOblU
So if I want to install the latest update I have to install the first update?
Sent from my GT-I8190 using XDA-Developers mobile app
Anonymous94 said:
So if I want to install the latest update I have to install the first update?
Sent from my GT-I8190 using XDA-Developers mobile app
Click to expand...
Click to collapse
Yes because this new update is only 10+ mb and only replaces some libs in the system but if you already have my first version installed you can dirty flash as well
3liteking148 said:
Yes because this new update is only 10+ mb and only replaces some libs in the system but if you already have my first version installed you can dirty flash as well
Click to expand...
Click to collapse
Ok. Thank's
I'll download
Sent from my GT-I8190 using XDA-Developers mobile app