[Q] Cyanogenmod 12 lost root... HELP. - Verizon LG G3

I successfully flashed the new Cyanogenmod 12 5.0 ROM via Philz (first time using Philz btw) and I couldnt back up anything because I lost root and cannot get access to Titanium Backup or Quick Boot to get back into my custom recovery. I tried getting back to Philz via hardware buttons but it takes me to the default recovery instead... I really want to go back to 4.4.4 KK but idk how to get back without having any root or custom recovery access... Someone please help!

BaylorBear2014 said:
I successfully flashed the new Cyanogenmod 12 5.0 ROM via Philz (first time using Philz btw) and I couldnt back up anything because I lost root and cannot get access to Titanium Backup or Quick Boot to get back into my custom recovery. I tried getting back to Philz via hardware buttons but it takes me to the default recovery instead... I really want to go back to 4.4.4 KK but idk how to get back without having any root or custom recovery access... Someone please help!
Click to expand...
Click to collapse
When you go into Recovery via the Hardware button combo, it will take you back to default recovery, if you click through it . it will then load your installed (Philz) recovery, that is being you did properly install Philz correctly. You can then flash the Nandroid back up you made before installing another rom... you did make a Nandroid? If not you have a lot of reading to do.
Addon: The link below is something you should know forward and backwards before ever flashing anything. Good Luck.
http://forum.xda-developers.com/verizon-lg-g3/general/guide-flash-to-stock-10b-kdz-method-t2928140

So just so I'm 100% clear.. after I KDZ method back to 10B from 11C and obtain root with Stump and grab SuperSu... I can then use flashify to flash Philz.. then Use Philz.. instead of TWRP to Flash CM12... right?

Related

GT 10.1 LTE - EH04 - Unable to install CWM Recovery

I have a rooted GT 10.1 LTE with the EH04 update. I have tried flashing via CWM which results in the obvious breakage. I have also tried installing via Recovery and Odin with the attached files and in various combinations with no luck.
Any suggestions or ideas on what I am mucking up to not be able to get CWM only my tablet?
To note: It was working prior to the EH04 update.
Bump.
Any ideas?
try the cwm here:
http://forum.xda-developers.com/showthread.php?t=1090289
to a certain degree it is a lot of trial and error as to what parts of the various 10.1 models are common and which are distinct -- at this juncture what is to loose from flashing a different cwm?
Try this recovery ( flash zip)
http://www.mediafire.com/?w45j8i0fcj0wck0
Then try this rom
http://forum.xda-developers.com/showthread.php?t=1277045
Its been working very well for me.
Mr.Jester said:
I have a rooted GT 10.1 LTE with the EH04 update. I have tried flashing via CWM which results in the obvious breakage. I have also tried installing via Recovery and Odin with the attached files and in various combinations with no luck.
Any suggestions or ideas on what I am mucking up to not be able to get CWM only my tablet?
To note: It was working prior to the EH04 update.
Click to expand...
Click to collapse
I unrooted to get the EH04 updated using this: http://rootzwiki.com/topic/7718-romleakodineg01-factory-stock-odin-image-vzw-lte-tab-101/ , waited for the EH04 update, then re-rooted using this (which I used to root initially): http://rootzwiki.com/topic/2242-root-recovery-galaxy-tab-101-lte/ .
Perhaps you should unroot per the above, take the update, then re-root as above--worked for me.
i ota'd EH04, lost root. downloaded kernel.zip, applied it, got root back, installed cwmod, clicked to reboot into recovery and it's looping since, i can't do anything but get into ODIN but the PC wont recognize it, although i get a pop up saying android.. installed, adb devices doesn't pick up either. can't get into recovery.
---
update
http://forum.xda-developers.com/showpost.php?p=18121666&postcount=53
someone warned in the forums and i didn't read it before i did it, used odin to put recovery.zip, now i'm back in action.
The recovery you provided is the same that I attached. What I discovered however is that if I booted into recovery right after installing the CWM recovery, CWM would load. If I booted into stock EH04 then back into recovery, the stock recovery would load. It seems as if the ROM was restoring stock recovery when it loaded. After installing Lightspeed, CWM recovery stayed in place.
Either way, thank you for the assistance. I hope this thread ends up helping someone else.
My steps to install Lightspeed from Stock ROM EH04:
1. reboot recovery, install either recovery.zips above.
2. When the system automatically reboots, hold volume up to boot into recovery again. This time it should be CWM.
3. Wipe cache and factory reset
4. Install Lightspeed ROM
I
Mr.Jester said:
The recovery you provided is the same that I attached. What I discovered however is that if I booted into recovery right after installing the CWM recovery, CWM would load. If I booted into stock EH04 then back into recovery, the stock recovery would load. It seems as if the ROM was restoring stock recovery when it loaded. After installing Lightspeed, CWM recovery stayed in place.
Either way, thank you for the assistance. I hope this thread ends up helping someone else.
My steps to install Lightspeed from Stock ROM EH04:
1. reboot recovery, install either recovery.zips above.
2. When the system automatically reboots, hold volume up to boot into recovery again. This time it should be CWM.
3. Wipe cache and factory reset
4. Install Lightspeed ROM
Click to expand...
Click to collapse
Thank you. Everytime I tried flashing cwm recovery, I would always end up back at stock recovery. Your fix worked perfect.

[Q] Need to get back recovery, whether it is stock or custom!

So after rooting and taking the android 4.3 update, my phone worked just fine with root. Then I tried to install a custom recovery (TWRP, using the ADB method) and ever since then, the recovery is just gone. Whenever I try to boot into it, the phone boots into download mode with an error message saying, "Could not do normal boot". After that, I tried installing TWRP from the Goo Manager app. Nothing changes. I also can't find a stock restore for 4.3 or a downgrade to 4.2. Is there any way for me to get back stock recovery or a custom recovery?
m634 said:
So after rooting and taking the android 4.3 update, my phone worked just fine with root. Then I tried to install a custom recovery (TWRP, using the ADB method) and ever since then, the recovery is just gone. Whenever I try to boot into it, the phone boots into download mode with an error message saying, "Could not do normal boot". After that, I tried installing TWRP from the Goo Manager app. Nothing changes. I also can't find a stock restore for 4.3 or a downgrade to 4.2. Is there any way for me to get back stock recovery or a custom recovery?
Click to expand...
Click to collapse
First, you should have done more research. You can't install a custom recovery on 4.3 (or MJ7). The only thing available is a "questionable" root method. No custom ROMs and no Safestrap.
Second, once an update has been applied, there is no way of going back.
You should check this thread out. http://forum.xda-developers.com/showthread.php?t=2507217.
If that doesn't work, try this one. http://forum.xda-developers.com/showthread.php?t=2507253.
Make sure you read ALL instructions first.
Good luck.
m634 said:
So after rooting and taking the android 4.3 update, my phone worked just fine with root. Then I tried to install a custom recovery (TWRP, using the ADB method) and ever since then, the recovery is just gone. Whenever I try to boot into it, the phone boots into download mode with an error message saying, "Could not do normal boot". After that, I tried installing TWRP from the Goo Manager app. Nothing changes. I also can't find a stock restore for 4.3 or a downgrade to 4.2. Is there any way for me to get back stock recovery or a custom recovery?
Click to expand...
Click to collapse
You can't install a custom recovery on 4.3/MJ7.
The only way to recover this is for you to flash the full-wipe MJ7 image that you'll find here in the development forum.
Then, consider reading before flashing. The I545 has a locked bootloader and can't support a custom recovery or custom kernels.
k1mu said:
You can't install a custom recovery on 4.3/MJ7.
The only way to recover this is for you to flash the full-wipe MJ7 image that you'll find here in the development forum.
Then, consider reading before flashing. The I545 has a locked bootloader and can't support a custom recovery or custom kernels.
Click to expand...
Click to collapse
Thanks! Knowing this, I think I will just stick with root but no recovery...hopefully, something will change and allow me to unstick myself from this situation in the future.
riker147 said:
You should check this thread out. http://forum.xda-developers.com/showthread.php?t=2507217.
Click to expand...
Click to collapse
This worked well when I had the same issue. I did lose root even with Survival Mode enabled on SuperSU, but otherwise no issues. Thank you.

[Q] Android System Recovery 3e

Hi All, I rooted my Verizon GS4 with this method "[GUIDE] Root for Verizon Galaxy S4 ***VRUAMDK Build Only!***" back before the first update so I have Root with Baseband I545VRUAMDK, Build JDQ39.I545VRUAMDKand Kernal 3.4.0-562219. I haven't tried to install any ROMs since then but started to get the itch so I started refreshing myself on the process and found that when I try to reboot into CWM Recovery it boots to Android System Recovery 3e. I'm looking for guidance on how to get CWM working properly. ROM Manager says I am using CWM 6.0.4.7. Any help will be appreciated.
Thanks
jpp2109 said:
Hi All, I rooted my Verizon GS4 with this method "[GUIDE] Root for Verizon Galaxy S4 ***VRUAMDK Build Only!***" back before the first update so I have Root with Baseband I545VRUAMDK, Build JDQ39.I545VRUAMDKand Kernal 3.4.0-562219. I haven't tried to install any ROMs since then but started to get the itch so I started refreshing myself on the process and found that when I try to reboot into CWM Recovery it boots to Android System Recovery 3e. I'm looking for guidance on how to get CWM working properly. ROM Manager says I am using CWM 6.0.4.7. Any help will be appreciated.
Thanks
Click to expand...
Click to collapse
From what I've read about that issue is people have had to Odin back to stock then start over. Now maybe you could try installing another recovery like Philz maybe using Odin or try Goo for TWRP before you Odin back to mdk and go through all that.
Sent from my SCH-I545 using Tapatalk
I had a similar thing a few years ago, with what I know now I think the recovery is temporarily flashed with CWM to gain root and stock recovery is replaced after, I'd look for an actual CWM recovery to flash in.
Same applied to me using a ROM Manager, said it was v.xxx made a backup, flashed a ROM, turns out was left without a backup..... noob-old days
Bashing away at my HTC Desire C
Thank you for the solid replies, I'm interested in getting experience with the other recovery methods anyway so I'll try those and worse case I start from scratch.
I have pretty much this same issue. I was happily running 6.0.44 CWM, installed via CWM.
Then I happened to check and see there's an update to 6.0.47. I installed via ROM manager which reported success. Except that it isnt. I basically have 2 recoveries as far as ROM manager is concerned. It thinks I'm on 6.0.47, but 6.0.44 is what boots. I'm betting it's the same issue you have.
I re-flashed Twrp trying to fix it. Now twrp is what recovery always boots; but Rom manager still thinks 6.0.47 is installed. Rom manager shows BOTH recoveries in the "Recovery already installed" menu.
Seems the issue here is the 6.0.47 when flashed via Rom manager. It bugs the crap out of me that it seems like I have 2 recoveries installed somehow. Not sure how that's possible, but everything seems like it's functioning for me.
Compare the sizes of the recoveries, one thing I've come across is when you flash a new .img in because of the NAND chip process for writing/erasing I have had 'remnants' from previous files.
In one respect it is unlikely but I wouldn't rule it out until you check yourself. It could just be left on the list as a marker that it has previously been installed.
Personally I don't use ROM Managers now, it's into TWRP Recovery and backup from there
Bashing away at my HTC Desire C
Look Like I'll Have to Start From Scratch
I'm just getting back to this because work was crazy. No Matter what recovery I try always comes up with Android System Recovery 3e. Stock MDK and re-root it is.
Maybe try using GooManager to install TWRP after you've gone back to stock.

Can't Install ROM with TWRP

When i try to click in twrp(used safestrap to install twrp) it doesnt get a accurate click on a button, this is a issue because i cant use the recovery . Im willing to try anything at this point.
I think you might have installed the wrong Safestrap / recovery. The recommended method for recovery for the Atrix 2 is https://play.google.com/store/apps/details?id=com.projectlense.bootmenu.manager&hl=en . I believe you are going to have to flash back to stock and re-root and use the Boot Menu Manager to install your roms.
http://sbf.droid-developers.org/phone.php?device=17
http://forum.xda-developers.com/showthread.php?t=1909319

At my wits end installing CWM on rooted verizon s4 with mdk

So a while back I decided to start my phone fresh. remove root. full factory reset. of course the plan was to re root install a recovery and get back to flashing far too many roms. but ive hit a snag and I cant find my fix.
Starting off, to return to stock I odin flashed the official mdk firmware from back in the day. And then did a factory restore to completely remove everything.
Once done with that I odin flashed the md2 prelease firmware to get root with the motochopper method. updated su binaries and then flashed the mdk kernel back.
And all of that seemed to work fine. Apps requiring root seemed to work fine. But when it came time to flash cwm with rom manager the **** started. after flashing the latest cwm and rebooting into recovery I was greeted with the regular android recovery. So I tried flashing it from rom recovery. That seemed to work. But no roms will flash. Making and restoring a backup kind of worked. But cwn was mainly useless.
So I started over and over with the reverting to stock, factory reseting, and rerooting. ive tried the loki versions of cwm flashing with no luck and have just hit a highly frustrating wall. After near 12 hours trying to figure this out I'm asking for assistance. ive done this before. what the hell is the problem. Help me XDA people. You're my only hope.
Cwm from rom manager hasn't worked in awhile. Use philz touch if you really want cwm. Or use flashify to get twrp
hydeburns said:
So a while back I decided to start my phone fresh. remove root. full factory reset. of course the plan was to re root install a recovery and get back to flashing far too many roms. but ive hit a snag and I cant find my fix.
Starting off, to return to stock I odin flashed the official mdk firmware from back in the day. And then did a factory restore to completely remove everything.
Once done with that I odin flashed the md2 prelease firmware to get root with the motochopper method. updated su binaries and then flashed the mdk kernel back.
And all of that seemed to work fine. Apps requiring root seemed to work fine. But when it came time to flash cwm with rom manager the **** started. after flashing the latest cwm and rebooting into recovery I was greeted with the regular android recovery. So I tried flashing it from rom recovery. That seemed to work. But no roms will flash. Making and restoring a backup kind of worked. But cwn was mainly useless.
So I started over and over with the reverting to stock, factory reseting, and rerooting. ive tried the loki versions of cwm flashing with no luck and have just hit a highly frustrating wall. After near 12 hours trying to figure this out I'm asking for assistance. ive done this before. what the hell is the problem. Help me XDA people. You're my only hope.
Click to expand...
Click to collapse
Like Josh said just use Flashify https://play.google.com/store/apps/details?id=com.cgollner.flashify
It's still updated and works great. To many have had issues with ROM manager or Goo.
Sent from my SCH-I545 using Tapatalk
hydeburns said:
So a while back I decided to start my phone fresh. remove root. full factory reset. of course the plan was to re root install a recovery and get back to flashing far too many roms. but ive hit a snag and I cant find my fix.
Starting off, to return to stock I odin flashed the official mdk firmware from back in the day. And then did a factory restore to completely remove everything.
Once done with that I odin flashed the md2 prelease firmware to get root with the motochopper method. updated su binaries and then flashed the mdk kernel back.
And all of that seemed to work fine. Apps requiring root seemed to work fine. But when it came time to flash cwm with rom manager the **** started. after flashing the latest cwm and rebooting into recovery I was greeted with the regular android recovery. So I tried flashing it from rom recovery. That seemed to work. But no roms will flash. Making and restoring a backup kind of worked. But cwn was mainly useless.
So I started over and over with the reverting to stock, factory reseting, and rerooting. ive tried the loki versions of cwm flashing with no luck and have just hit a highly frustrating wall. After near 12 hours trying to figure this out I'm asking for assistance. ive done this before. what the hell is the problem. Help me XDA people. You're my only hope.
Click to expand...
Click to collapse
I was in the same boat all day yesterday - reset to stock using the MDK No wipe tar via Odin, factory restored, flashed MD2, motochopped, flashed MDK, but then could not get any new recoveries to take. Using Flashify I was just able to install CWM 6.0.4.7 (which I had tried doing using ROM Manager, and paid $1.99 for, which didn't work) - halle-frickin-luyah!
sdsurferbob said:
I was in the same boat all day yesterday - reset to stock using the MDK No wipe tar via Odin, factory restored, flashed MD2, motochopped, flashed MDK, but then could not get any new recoveries to take. Using Flashify I was just able to install CWM 6.0.4.7 (which I had tried doing using ROM Manager, and paid $1.99 for, which didn't work) - halle-frickin-luyah!
Click to expand...
Click to collapse
Thanks guys. I tried all of this with the flashify. Even started off freshly reinstalling stock Mdk and then rerooting with the same method I mentioned earlier. Installing cwm through flashify. And though I can make and restore a backup of my stock rooted Rom. I get the same errors I've been getting trying to flash a custom Rom. I'll try to post a screenshot of the error I get in can when flashing.

Categories

Resources