I am not responsible for any damages for your device , by flashing this rom you will accept all the damages...
Click to expand...
Click to collapse
Downloads : http://www.mediafire.com/download/eknen45ixclcibv/CM11_v1_1.zip
As roms for recovery to do the three wipe. The roms before posting are tested in the Xiaomi Note
How to flash:
* First have TWRP or CWM installed (TWRP recommended).
* Take nadroid backup
* Flash above rom, and optionally gapps.
*wipe cache and dalvik
* Reboot and enjoy
Any one who could make an installation video will be saluted....
plz report bugs
Device tree and vendor files will be provided soon
cm 11 initial build will be provided.... soon
sai dev said:
Regular builds for this mod will be provided to you ...
As roms for recovery to do the three wipe. The roms before posting are tested in the Xiaomi Note
How to flash:
* First have TWRP or CWM installed (TWRP recommended).
* Take nadroid backup
* Flash above rom, and optionally gapps.
*wipe cache and dalvik
* Reboot and enjoy
Any one who could make an installation video will be saluted....
Click to expand...
Click to collapse
Just a heads up guys "As stated in OP Regular builds wont be provided. This rom is made by some chinese guy
Stock android 4.4? or based off 4.2?
Mrbababo said:
Stock android 4.4? or based off 4.2?
Click to expand...
Click to collapse
4.2 of course since no kernel source of redmi note has been released, yet!
This rom is CM 10 based on 4.2.2 , Not CM11 But everything is working smooth and fine
Thanks for putting the link, but as its based on CM10, can someone please post Screenshots and Details, before people start flashing it.
I would like to Have CM 11 on my Redmi Note, but can live with CM10 too, but without more details, I would be little hesitant to flash it.
MIUI Forums state, Redmi 1S will have its kernel source by December End, so we can hope Kernel source for Redmi Note should also come bundled as only specific Q1-2015 date for kernel source is mentioned about Mi-3.
Thread closed.
No kernel Source code.
Related
This is UNOFFICIAL build of CyanogenMod 11.0. This is clean ROM made straight from sources without any modifications. I've made it for myself but if someone else would like to use it feel free. I'm planning to make fresh build everyday till OFFICIAL nightlies appear. I'm doing this for free but if you like to support my time and computer resources feel free of donating. Thanks!
Changelog:
review.cyanogenmod.org
Downloads:
GApps: BaNkS GApps
ROM - Current version: cm-11-20131205-UNOFFICIAL-grouper.zip - md5sum f2b187b206096387e6c3376969db36aa
Installation:
Install a compatible Recovery
Download ROM (optional GApps)
Reboot into Recovery
Perform a NANDroid backup of your current ROM (optional)
Wipe Data/Factory Reset
Install ROM
(optional) Install GApps
Reboot
Upgrading from previous build:
Download ROM
Reboot into Recovery
Install ROM
Reboot
Screenshots:
Gallery
XDA:DevDB Information
[ROM][UNOFFICIAL][4.4] CyanogenMod 11 Nightlies built from source, a ROM for the Nexus 7
Contributors
skink123
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.1.x
ROM Firmware Required: CWM or TWRP recovery
Based On: CyanogenMod
Version Information
Status: No Longer Updated
Created 2013-12-05
Last Updated 2013-12-06
Reserved
And what would be the difference between this and other cm11 ROMs present aren't all of them are built from source
You should probably move this to the nexus 7 android development section. I don't believe this qualifies as original development.
Rock Chalk Jayhawk!
jlvlawrence said:
You should probably move this to the nexus 7 android development section. I don't believe this qualifies as original development.
Rock Chalk Jayhawk!
Click to expand...
Click to collapse
agreed...
Also, official nightlies are out.
Yea all of these threads becomes redundant once the official rolls out. Should make this a little more different. Have more to offer.
Sent from my Nexus 7 using Tapatalk 4
Introduction
This is a CWM based recovery and I did put up some work to update it to lollipop (cm 12.1) and marshmallow (cm-13) after official cwm development stopped at kitkat. It works with LOLLIPOP and MARSHMALLOW kernels and it builds with cm 12.1 or aicp lp-5.1 (version 5.2) and with cm 13 or aicp mm-6.0 (version 6.1).
Click to expand...
Click to collapse
Features
- EXT4 and F2FS if you need it.
- full touch menu ported by me from PhilZ touch Recovery. The old Napstar-xda touch module was good but it's quite old and to update that was too much work. Actually There is a version 4 with that touch module, all working, but the touch doesn't work with some input drivers and I had to give up on it for the new and improved version from PhilZ.
- all cwm functionalities are up and working (adb, sideload, backup, restore, install, mass storage...). There is no mtp and if your phone doesn't have an external sdcard you can't connect it to PC while is in recovery mode. But there is usb-otg support, of course if your phone was shipped with that.
- added new menu for backup and restore advanced, to use it for backing or restoring only a specific partition and I also ported from PhilZ the multizip flashing function.
Click to expand...
Click to collapse
Installation instructions
You must be on AOSP ROM or any ROM with LP kernel!!!
After downloading aosprecovery5.1.1.img, rename to recovery.img.
Install Flashify or Rashr and flash the recovery.img
Downloads
https://www.androidfilehost.com/?fid=24588232905719935
Credits
Phil3759
TWRP developers
Clockworkmod Team
Cyanogenmod Developers
AP756
DerTeufel1980
XDA:DevDB Information
CTR LP, Tool/Utility for the Android General
Contributors
kirito9, carliv
Source Code: https://github.com/kirito96/device_Alcatel_4032
http://forum.xda-developers.com/android/software/recovery-carliv-touch-recovery-v5-1-t3389290
Version Information
Status: Stable
Current Stable Version: 5.7
Stable Release Date: 2016-07-10
Created 2016-06-25
Last Updated 2016-07-10
Update
CHANGELOG 05-07-2016:
- fix loading the graphical ui for qcomm devices;
- added cancel backup feature (use power button or select from virtual keys);
- fix display of progress while backup, restore or install;
- some other small fixes and improvements (you can check the github commits).
Click to expand...
Click to collapse
Link- https://www.androidfilehost.com/?fid=24588212152304966
Hey guys, I am thinking of flashing cm 13 rom based on android 6.0.1 on my moto e (1st Generation). my question is that all you guys who have upgraded to the cm13 rom on their moto e, how is your experience now?facing any problems or is it just great from the stock rom experience. Please help and share.
AbhinavIsgrt said:
Hey guys, I am thinking of flashing cm 13 rom based on android 6.0.1 on my moto e (1st Generation). my question is that all you guys who have upgraded to the cm13 rom on their moto e, how is your experience now?facing any problems or is it just great from the stock rom experience. Please help and share.
Click to expand...
Click to collapse
You will get performance close to deodexed KitKat stock rom .. No problems so far .. surely upgrade your device to cm13 :good:
definitely no problems.. just great.
latest nightly works flawlessly..
there is plethora of feature in marshmallow and in being cyanogenmod
I am also thinking in flashing CM13 rom based on android 6.0.1 on my Moto-E (1st Generation) XT1021...
I am currently using the following 5.1 ROM:
Retail US 5.1 ROM (Optimized) v1.0a (311mb)Non-Deodexed:
http://forum.xda-developers.com/devdb/project/dl/?id=14437
That I Found in the following post:
http://forum.xda-developers.com/moto-e/development/rom-stock-motorola-lollipop-rom-t3167111
So, I would like to know if I can safely flash directly the CM13 ROM, on top of my current v5.1 ?
And if anyone here could give me the correct link to download the CM13 ROM that works best on the Moto-E XT-1021 ?
Thanks in advance for helping me !
ulises.rodriguez said:
I am also thinking in flashing CM13 rom based on android 6.0.1 on my Moto-E (1st Generation) XT1021...
I am currently using the following 5.1 ROM:
Retail US 5.1 ROM (Optimized) v1.0a (311mb)Non-Deodexed:
http://forum.xda-developers.com/devdb/project/dl/?id=14437
That I Found in the following post:
http://forum.xda-developers.com/moto-e/development/rom-stock-motorola-lollipop-rom-t3167111
So, I would like to know if I can safely flash directly the CM13 ROM, on top of my current v5.1 ?
And if anyone here could give me the correct link to download the CM13 ROM that works best on the Moto-E XT-1021 ?
Thanks in advance for helping me !
Click to expand...
Click to collapse
Yes you can directly clean flash cm13 .. make sure you use gapps 6.0 .. and flash cm13 and gapps in a single session
https://download.cyanogenmod.org/?device=condor
Here is the link to official nightlies
ABSathe said:
Yes you can directly clean flash cm13 .. make sure you use gapps 6.0 .. and flash cm13 and gapps in a single session
https://download.cyanogenmod.org/?device=condor
Here is the link to official nightlies
Click to expand...
Click to collapse
ABSathe, 1000 Thanks for the quick reply, for letting me know that I can directly clean flash cm13 over 5.1 and for the link to official nightlies !
Please confirm if this is the correct method to flash the CM13 ROM:
1) Boot into latest TWRP and Format Data: Wipe > Format DATA > Yes
2) Transfer ROM to SDCARD or Internal Storage: CM13 ROM + gapps 6.0
3) TWRP > Wipe > Factory reset and flash CM13 ROM, and then Flash gapps 6.0 (flash cm13 and gapps in a single session)
4) Reboot.
However, since I have already installed in my Moto-T, the version 2.8.7 of TWRP ( http://forum.xda-developers.com/mot...recovery-twrp-2-8-6-0-touch-recovery-t3100879 ), I would like to know if is better and also you recommended me to install first ( using fastboot flash recovery) the cm-13.0-20160810-NIGHTLY-condor-recovery.img (instead of TWRP 2.8.7) ? :
CyanogenMod Recovery:
https://download.cyanogenmod.org/get/jenkins/173585/cm-13.0-20160810-NIGHTLY-condor-recovery.img
And then the:
CyanogenMod Build
cm-13.0-20160810-NIGHTLY-condor.zip (322.76 MB)
https://download.cyanogenmod.org/get/jenkins/173585/cm-13.0-20160810-NIGHTLY-condor.zip
And Finally - Flash gapps 6.0:
http://forum.xda-developers.com/android/general/gapps-gapps-6-0-1-minimal-t3276606
https://www.androidfilehost.com/?fid=24533103863139560
One last question, since I know that the CM13 is not based in an official Motorola release, I would like to know what is working flawlessly, and what is not working with in the Moto-E if I use this CM13 ROM ?
Please excuse all the questions, but I will like to be fully sure of the method and the correct files, that I have to use to successfully flash my Moto-E to CM13, to avoid future problems.
Thanks again for all your help !!
@ulises.rodriguez
I would recommend following steps
1)Download latest twrp (3.0.2) from twrp official website
2) Reboot into recovery and choose downloaded recovery image and then select recovery partition
(Twrp updated .. u can reboot for file transfer)
3)Transfer rom and gapps6.0 to sd card
4)Reboot into twrp and wipe /system,/data,/cache,/dalvikcache partitions (internal storage is optional )
5)choose rom zip (latest from cm downloads)
6)after rom zip is flashed successfully .. choose gapps zip (use open gapps Pico)
7)After successfully flashing both files .. reboot into system and enjoy new rom on moto e
Cm13 today's nightly working flawless for me
(And regarding your first sentence of post(1000 thanks ) .. I can't see them on my profile XD (Just joking .. hit thanks only if u want ))
Ignore any English grammatical mistakes in the post
ABSathe said:
@ulises.rodriguez
I would recommend following steps
1)Download latest twrp (3.0.2) from twrp official website
2) Reboot into recovery and choose downloaded recovery image and then select recovery partition
(Twrp updated .. u can reboot for file transfer)
3)Transfer rom and gapps6.0 to sd card
4)Reboot into twrp and wipe /system,/data,/cache,/dalvikcache partitions (internal storage is optional )
5)choose rom zip (latest from cm downloads)
6)after rom zip is flashed successfully .. choose gapps zip (use open gapps Pico)
7)After successfully flashing both files .. reboot into system and enjoy new rom on moto e
Cm13 today's nightly working flawless for me
(And regarding your first sentence of post(1000 thanks ) .. I can't see them on my profile XD (Just joking .. hit thanks only if u want ))
Ignore any English grammatical mistakes in the post
Click to expand...
Click to collapse
ABSathe, thanks again for your fast response and also valuable help !
Is this the open gapps6.0 Pico that you have installed in your Moto-E ? :
open_gapps-arm-6.0-pico-20160810.zip
http://opengapps.org/?download=true&arch=arm&api=6.0&variant=pico
With regard to my question about how well it is currently working the CM13 in the Moto-E, and what is not working yet...
I was asking because I've heard that as the CM13 was not based on a official version of Motorola, some features of the Moto-E did not work very well...
So, I would like to know, if the proximity sensor, Phone Signal Bluetooth, Camera, Gyroscope and all other sensors, if all of them are working well, or if any have some limitations ?
Are there any features that you have found that work best with the CM13, than with the official ROMs from Motorola for the Moto-E ?
Thanks again for helping me and always answer all my requests !
ulises.rodriguez said:
ABSathe, thanks again for your fast response and also valuable help !
Is this the open gapps6.0 Pico that you have installed in your Moto-E ? :
open_gapps-arm-6.0-pico-20160810.zip
http://opengapps.org/?download=true&arch=arm&api=6.0&variant=pico
With regard to my question about how well it is currently working the CM13 in the Moto-E, and what is not working yet...
I was asking because I've heard that as the CM13 was not based on a official version of Motorola, some features of the Moto-E did not work very well...
So, I would like to know, if the proximity sensor, Phone Signal Bluetooth, Camera, Gyroscope and all other sensors, if all of them are working well, or if any have some limitations ?
Are there any features that you have found that work best with the CM13, than with the official ROMs from Motorola for the Moto-E ?
Thanks again for helping me and always answer all my requests !
Click to expand...
Click to collapse
All the sensors are working perfectly
And regarding gapps .. I have installed older package (which I downloaded in July) .. but the latest one will just work fine
And latest nightly of cm13 is working perfectly for me.. so go for it
Sent from my Nexus 5X using XDA Labs
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
What's working :
● Boots
● RIL (Calls, SMS, Data)
● Wi-Fi
● Bluetooth
● Camera ( Videos And Photos )
● Video Playback
● Audio ( Record and Playback )
● Flash
● GPS
What's not working :
● You tell me!
Instructions :
● Download the latest build and GApps
● Reboot to recovery
● Flash the latest build and GApps
● Reboot
Downloads :
● ROM : https://mega.nz/#!Qdx0QC4B!e7diTF9Je3VqKR7CmGAn7-jBOiie3O7PL6bGvWnDAIg
● Google Apps: http://opengapps.org/
● Front Cam Fix:
https://basketbuild.com/filedl/devs?dev=Adityaupreti&dl=Adityaupreti/Patch+and+Front+cam+Fix.zip
Credits :
@SoUnd001 : For his camera patches
CyanogenMod Team
SS:
XDA:DevDB Information
[ROM][UNOFFICIAL][Stable][6.0.1] CyanogenMod 13.0 [SM-G7105], ROM for the Samsung Galaxy Grand 2
Contributors
terabithia1572
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Stable
Created 2017-06-01
Last Updated 2017-06-01
Thanks. I can use it this week end
skippy_skippy said:
Thanks. I can use it this week end
Click to expand...
Click to collapse
You're Welcome
Will you develop roms for g2
Bboy_23 said:
Will you develop roms for g2
Click to expand...
Click to collapse
yes
I am developing TW MM now.
TW MM everthing working but ril not working ı am working for fix
terabithia1572 said:
yes
I am developing TW MM now.
TW MM everthing working but ril not working ı am working for fix
Click to expand...
Click to collapse
Wow thats good to know... Now theres some life back to g2 thanks... Good luck with that
Hello i can't install it there was always an error 7
skippy_skippy said:
Hello i can't install it there was always an error 7
Click to expand...
Click to collapse
install Twrp bro
I have your version of twrp
skippy_skippy said:
I have your version of twrp
Click to expand...
Click to collapse
TWRP--> Settings--remove tick Zip file signature verification after try
I success to install but i have problème. It not reconize my sdcard . iand i can't install xposed. So i Côme back to m'y last ROM.
Same story...
skippy_skippy said:
I success to install but i have problème. It not reconize my sdcard . iand i can't install xposed. So i Côme back to m'y last ROM.
Click to expand...
Click to collapse
It not reconize my sdcard.
skippy_skippy said:
I success to install but i have problème. It not reconize my sdcard . iand i can't install xposed. So i Côme back to m'y last ROM.
Click to expand...
Click to collapse
ok ı upload try
Thank you very much for this rom awesome work
How to fix sd card issue. AND please mention the excat GAPS download link. Bqz in this linke there are many options am just confused which i hv to download
Can't install rom
Hi,
I'm trying to install this rom on my SM-G7105 but twrp keeps saying me that there is an error 7 when trying to flash. I don't understand why, i've checked lot of times my phone and its a SM-G7105, ms01lte.
When i boot on your twrp recovery, my computer says me its a G7102, but when i boot it, it prints 'Samsung galaxy grand 2 SM-G7105', the stock rom that is on it is for SM-G7105 and when going into parameters, its written SM-G7105.
I tryed to flash with SM-G7102 images in case of my device was buggy but when i do this, recoveries can't even flash my partitions :/ and i have to reflash it with a stock firmware with Odin.
Do you happen to know what might block twrp from flashing my device ?
I'd like to test your rom since i'm stuck at Android 4.4.2...
Bro this ROM is only for grand 2 G7105 not work in grand 2 G7102??
in with suraj said:
Bro this ROM is only for grand 2 G7105 not work in grand 2 G7102??
Click to expand...
Click to collapse
Ok, looks like i'm not clear enought, here is what adb says when using adb shell when my phone IS BOOTED :
Code:
D:\Android\sdk\platform-tools>adb shell
[email protected]:/ $
Can't post links for moment
ht tp://i.imgur.com/SoS98Q9.png
Here's what my computer says when the phone is booted IN RECOVERY :
ht tp://i.imgur.com/7AQqo4j.png
in with suraj said:
Bro this ROM is only for grand 2 G7105 not work in grand 2 G7102??
Click to expand...
Click to collapse
only For LTE
?
eline saglik good job
Hello Redmi 2 user today am sharing a Rom for you
This Rom is ported rom and am not the developer am just sharing it
This ROM is based on android 5.1 lollipop
And provide near to stock ui with theme engine
XUI
Xui is the user interface of infinix device
Features:
App drawer
Theme engine
D2w
Advance reboot
Pre rooted
Volte
Camera
Whats working
Volte ( as most of you want that,)
Camera
Flashlight
Bug:
Not any full stable
Prequist :
Twrp Latest version
Patience
Flashing instructions:
Wipe data to factory reset don't advance wipe anything just factory reset in twrp recovery
Flash the rom
Wait.. till it's boot up no gapps required
Pre rooted
Download :-
Mega https://mega.nz/#!v08i3bLJ!D122c1-rSATV_tpb0GuHo4YzinK1T9h27frUYp9WG2A
Original thread link :
https://www.belajardroid.com/custom-rom-xui-lollipop-64-bit-buat-redmi-2/
Any screenshot??
Please complete specifications of this rom. It was Lollipop
It is based On android lollipop
If any one had tried it then please post the screenshot here
Just watch any of thousands reviews of this rom on YouTube.
Some body asked for screenshot??
What about stability of this rom
Sot pleas
Rom is fine bt need android upgrade pleas