Q&A for [Z Ultra][TWRP][PhilZ Touch][CWM] XZDualRecovery Q&A
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Z Ultra][TWRP][PhilZ Touch][CWM] XZDualRecovery Q&A. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Cannot go to recovery
I have installed this dual recovery to stock rom and i managed to change my rom to Cm11 snapshot which is a great rom. however i was trying to go to recovery and apparently im not going anywhere. Yellow LED light up but im not going to any recovery at all even after pressing volume up or down upon boot up. what am i doing wrong and what would be a possible fix for this? any help would be appreciated.:crying: thanks
rojculanag said:
I have installed this dual recovery to stock rom and i managed to change my rom to Cm11 snapshot which is a great rom. however i was trying to go to recovery and apparently im not going anywhere. Yellow LED light up but im not going to any recovery at all even after pressing volume up or down upon boot up. what am i doing wrong and what would be a possible fix for this? any help would be appreciated.:crying: thanks
Click to expand...
Click to collapse
CM11 will have over written this recovery when you installed it. Just after you start the boot the LED should go purple for a second or two, press the vol up key then and you should endup in CWM
blueether said:
CM11 will have over written this recovery when you installed it. Just after you start the boot the LED should go purple for a second or two, press the vol up key then and you should endup in CWM
Click to expand...
Click to collapse
Thank you for the reply mate. Thats"s what i thought also, i try to go to CWM,when purple LED lights up, i would press volume UP but it would just be stuck on SONY logo and yellow LED would light up and that's it. I have to restart the phone. is it ok to reflash the recovery? or would there be any step that I need to do. Thanks. Very appreciated.
rojculanag said:
Thank you for the reply mate. Thats"s what i thought also, i try to go to CWM,when purple LED lights up, i would press volume UP but it would just be stuck on SONY logo and yellow LED would light up and that's it. I have to restart the phone. is it ok to reflash the recovery? or would there be any step that I need to do. Thanks. Very appreciated.
Click to expand...
Click to collapse
try flashing the boot.img again or try another one (Carbon/DooMLoRD's/etc)
blueether said:
CM11 will have over written this recovery when you installed it. Just after you start the boot the LED should go purple for a second or two, press the vol up key then and you should endup in CWM
Click to expand...
Click to collapse
blueether said:
try flashing the boot.img again or try another one (Carbon/DooMLoRD's/etc)
Click to expand...
Click to collapse
thanks. I finally was able to do it. thank you. now im trying out Android Lollipop Port and it's great.
Code:
==============================================
= =
= PhilZ Touch, CWM and TWRP Dual Recovery =
= Maintained by [NUT] =
= =
= For Many Sony Xperia Devices! =
= =
==============================================
1. Installation on ROM rooted with SuperSU
2. Installation on ROM rooted with SuperUser
3. Installation on unrooted ROM using the TowelRoot method
4. Install ADB drivers to windows
5. Exit
Please choose install action.
[1,2,3,4,5]?3
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
=============================================
Waiting for Device, connect USB cable now...
=============================================
Device found!
=============================================
Getting ro.build.product
=============================================
Device model is C6833
Firmware is 14.4.A.0.108
=============================================
Step2 : Sending the recovery files.
=============================================
mkdir failed for /data/local/tmp/recovery, File exists
0 KB/s (29 bytes in 1.000s)
15387 KB/s (15757 bytes in 0.001s)
0 KB/s (501 bytes in 1.000s)
11 KB/s (11842 bytes in 1.000s)
1790 KB/s (56834 bytes in 0.031s)
334 KB/s (3082 bytes in 0.009s)
0 KB/s (385 bytes in 1.000s)
1794 KB/s (657704 bytes in 0.358s)
1996 KB/s (2965760 bytes in 1.451s)
2494 KB/s (2599934 bytes in 1.018s)
2142 KB/s (1875823 bytes in 0.855s)
855 KB/s (8759 bytes in 0.010s)
=============================================
Step3 : Setup of dual recovery.
=============================================
=============================================
Attempting to get root access for installation using TowelRoot now.
NOTE: this only works on certain ROM/Kernel versions!
If it fails, please check the development thread (Post #2) on XDA for more detai
ls.
REMEMBER THIS:
XZDualRecovery does NOT install any superuser app!!
You can use one of the recoveries to root your device.
=============================================
=============================================
Sending files
=============================================
153 KB/s (1572 bytes in 0.010s)
1659 KB/s (13592 bytes in 0.008s)
cannot stat 'easyroottool\libexploit.so': No such file or directory
545 KB/s (9496 bytes in 0.017s)
1335 KB/s (13672 bytes in 0.010s)
Copying kernel module...
1122 KB/s (34473 bytes in 0.030s)
0 KB/s (765 bytes in 1.000s)
1659 KB/s (13592 bytes in 0.008s)
Kernel version is 3.4.0-perf-g0109737
Version does not match 3.4.0-perf-ge4322cd, needs patching...
1+0 records in
0+1 records out
19 bytes transferred in 0.001 secs (19000 bytes/sec)
Kernel module patched.
modulecrcpatch (by zxz0O0)
module_layout: match
__aeabi_unwind_cpp_pr1: match
kallsyms_lookup_name: not found
printk: not found
mem_text_write_kernel_word: not found
__aeabi_unwind_cpp_pr0: match
successfully patched
=============================================
Installing using zxz0O0's towelzxperia
(using geohot's towelroot library)
=============================================
towelzxperia (by zxz0O0)
thanks to geohot for libexploit
creating libzxploit.so
error: Could not open libexploit.so
/system/bin/sh: /system/xbin/busybox: not found
=============================================
Installation finished. Enjoy the recoveries!
=============================================
Aby kontynuować, naciśnij dowolny klawisz . . .
What am I doing wrong? Can anyone help? I have tried on the second laptop with the same result. Windows 7 x64.
Never mind. I didn't turn off antivirus.
Hi..
Wondering if I'm able to flash these cwm/ twrp
Into my togari 6833 (xperia z ultra)?
Error while installing on C6802 Xperia Z Ultra
==============================================
= =
= PhilZ Touch, CWM and TWRP Dual Recovery =
= Maintained by [NUT] =
= =
= For Many Sony Xperia Devices! =
= =
==============================================
1. Installation on ROM rooted with SuperSU
2. Installation on ROM rooted with SuperUser
3. Installation on unrooted ROM using the TowelRoot method
4. Install ADB drivers to windows
5. Exit
Please choose install action.
[1,2,3,4,5]?1
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
=============================================
Waiting for Device, connect USB cable now...
=============================================
error: more than one device and emulator
Device found!
=============================================
Getting ro.build.product
=============================================
error: more than one device and emulator
Device model is
error: more than one device and emulator
Firmware is
=============================================
Step2 : Sending the recovery files.
=============================================
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
=============================================
Step3 : Setup of dual recovery.
=============================================
error: more than one device and emulator
error: more than one device and emulator
Look at your device and grant supersu access!
Press any key to continue AFTER granting root access.
error: more than one device and emulator
Press any key to continue . . .
error: more than one device and emulator
error: protocol fault (status read)
error: more than one device and emulator
error: more than one device and emulator
=============================================
Installation FAILED!
Please copy and paste the contents of this
window to the DevDB thread for troubleshooting!
=============================================
Press any key to continue . . .
Problem while switching to recovery..
I installed recovery properly..
But when I am trying to switch recovery mod, It is directly switch on..
I am using a latest firmware 14.4.A.0.108..
Is there any solution for it??
I installed this successfully on my Z ULtra. However when I tried to do a nandroid backup or flash a custom rom i always face this error : cannot mount system ??
ANy solution to this ?
Thanks
Issues with Dual Boot Recovery
Hi,
Anyone can help me out?
I have an Xperia Z Ultra, freshly rooted with unlocked BL.
I installed Dual Recovery but for some reason, I can't reboot to any of the recovery this has to offer (PhilTouch, CWM, and TWRP).
Tried the physical button method and via NDR Utils with no success.
Looking at the log on the console, it looks like it failed to copy some files saying that a given directory is read-only but I checked using ES File Explorer that these directories are writable.
Can anyone help out as I would like to create a nandroid backup before messing with anything else just in case.
Anyway, here is the output of the installer console:
===========================================================
==============================================
= =
= PhilZ Touch, CWM and TWRP Dual Recovery =
= Maintained by [NUT] =
= =
= For Many Sony Xperia Devices! =
= =
==============================================
1. Installation on ROM rooted with SuperSU
2. Installation on ROM rooted with SuperUser
3. Installation on unrooted ROM using the TowelRoot method
4. Install ADB drivers to windows
5. Exit
Please choose install action.
[1,2,3,4,5]?1
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
=============================================
Waiting for Device, connect USB cable now...
=============================================
Device found!
=============================================
Getting ro.build.product
=============================================
Device model is C6833
Firmware is 14.4.A.0.108
=============================================
Step2 : Sending the recovery files.
=============================================
19 KB/s (30 bytes in 0.001s)
4728 KB/s (16947 bytes in 0.003s)
326 KB/s (501 bytes in 0.001s)
4656 KB/s (11920 bytes in 0.002s)
5842 KB/s (56834 bytes in 0.009s)
1504 KB/s (3082 bytes in 0.002s)
3271 KB/s (30148 bytes in 0.009s)
453 KB/s (1162 bytes in 0.002s)
2805 KB/s (34473 bytes in 0.012s)
225 KB/s (924 bytes in 0.004s)
1896 KB/s (13592 bytes in 0.007s)
375 KB/s (385 bytes in 0.001s)
5405 KB/s (719520 bytes in 0.130s)
5668 KB/s (3419065 bytes in 0.589s)
5123 KB/s (2431545 bytes in 0.463s)
6589 KB/s (1936442 bytes in 0.287s)
3477 KB/s (8902 bytes in 0.002s)
=============================================
Step3 : Setup of dual recovery.
=============================================
Look at your device and grant supersu access!
Press any key to continue AFTER granting root access.
-rwxr-xr-x 1 shell shell 719520 Apr 8 14:27 /data/local/tmp/recover
y/busybox
Press any key to continue . . .
##########################################################
#
# Installing XZDR version 2.8.5 RELEASE
#
#####
Temporarily disabling the RIC service, remount rootfs and /system writable to al
low installation.
insmod: can't insert '/system/lib/modules/wp_mod.ko': File exists
Copy recovery files to system.
Copy chargemon script to system.
Copy dualrecovery.sh to system.
Copy rickiller.sh to system.
Installing NDRUtils to system.
Copy disableric to system.
Copy busybox to system.
Trying to find and update the gpio-keys event node.
Found and will be using /dev/input/event5!
sed: can't create temp file '/storage/sdcard1/XZDualRecovery/XZDR.propGnS20I': R
ead-only file system
Trying to find and update the power key event node.
Found and will be monitoring /dev/input/event4!
sed: can't create temp file '/storage/sdcard1/XZDualRecovery/XZDR.propUUaD89': R
ead-only file system
Speeding up backups.
touch: /sdcard1/clockworkmod/.hidenandroidprogress: Read-only file system
Make sure firstboot goes to recovery.
sed: can't create temp file '/storage/sdcard1/XZDualRecovery/XZDR.propTcsuIy': R
ead-only file system
sed: can't create temp file '/storage/sdcard1/XZDualRecovery/XZDR.propT1eL2g': R
ead-only file system
=============================================
DEVICE WILL NOW TRY A DATA SAFE REBOOT!
=============================================
=============================================
Your installation has already cleaned up after
itself if you see the install.bat/install.sh exit.
=============================================
=============================================
Installation finished. Enjoy the recoveries!
=============================================
Press any key to continue . . .
=============================================
Hi sorry I just want to see if anyone can help me with my z ultra I can't get it to enter recovery with the hardware keys and the rom isn't working correctly so I can't do anything when It turns on all help appreciated
Anyone?
@[NUT], assistance please?
Thanx!
Resolved!
I removed the installation using the guide on the original thread and reinstalled a newly downloaded version (ZU-lockeddualrecovery2.8.8-RELEASE.installer.zip)
Just thought I'd place a feedback here.
Thanks!
Can this be installed on purely stock unrooted firmware? I'm on Lollipop .270.
Sent from my LG-F320L using Tapatalk
Failed install ZU Dual Recovery
Hi... sorry, i want to see if anyone can help me with my Z Ultra C6833 build number 14.4.A.0.108, I am failed install recovery.
Can anyone help me out, until success install Dual Recovery...
==============================================
= =
= PhilZ Touch, CWM and TWRP Dual Recovery =
= Maintained by [NUT] =
= =
= For Many Sony Xperia Devices! =
= =
==============================================
1. Installation on ROM rooted with SuperSU
2. Installation on ROM rooted with SuperUser
3. Installation on unrooted ROM using the TowelRoot method
4. Install ADB drivers to windows
5. Exit
Please choose install action.
[1,2,3,4,5]?1
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
=============================================
Waiting for Device, connect USB cable now...
=============================================
error: protocol fault (status read)
Device found!
=============================================
Getting ro.build.product
=============================================
error: more than one device and emulator
Device model is
error: more than one device and emulator
Firmware is
=============================================
Step2 : Sending the recovery files.
=============================================
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
=============================================
Step3 : Setup of dual recovery.
=============================================
error: more than one device and emulator
error: more than one device and emulator
Look at your device and grant supersu access!
Press any key to continue AFTER granting root access.
error: more than one device and emulator
Press any key to continue . . .
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
error: more than one device and emulator
=============================================
Installation FAILED!
Please copy and paste the contents of this
window to the DevDB thread for troubleshooting!
=============================================
Press any key to continue . . .
Hello I'm using a Xperia z ultra c6833 running stock lollipop 5.2 I have done nothing on it i dont have root my bootloader is locked keep in mind that lollipop has some problems I want to install a coustem rom can I use this method is there any other way please help me I'm losing hop please help
---------- Post added at 12:35 PM ---------- Previous post was at 12:14 PM ----------
Hello I'm using a Xperia z ultra c6833 running stock sony lollipop 5.0.2 I don't have root access and my bootloader is locked since lollipop has problems and it's really hard to get a coustem recovery in my situation can I use this method is there any other way I'm losing hop can any one please help
Related
Hi,
I could upgrade today to ICS and wanted to root with the Bin4ry package but i doesn't work
the phone opens the Backup Restore App and there is the RootMe Restore point.
Then I click the Restore buton, Now sometimes I get the Error: "Couldn't restore reconect external memory" and then a reboot and sometimes just a reboot
But no root!
I tried v9, v13 and v15
nothing works.
USB Debuging is active, sd card is removed
help
thanks
Code:
======================================================================
= This script will root your Android phone with adb restore function =
= Script by Bin4ry (thanks to Goroh_kun and tkymgr for the idea) =
= Idea for Tablet S from Fi01_IS01 =
= (13.10.2012) v15 =
======================================================================
Device type:
1) Normal
2) Special (for example: Sony Tablet S, Medion Lifetab)
x) Unroot
Make a choice: 1
Checking if i should run in Normal Mode or special Sony Mode
Please connect your device with USB-Debugging enabled now
1689 KB/s (147059 bytes in 0.085s)
remote object '/system/bin/ric' does not exist
.
Found Sony Backup-Restore.apk
LT26,LT22 etc. mode enabled!
.
Pushing busybox....
2447 KB/s (1085140 bytes in 0.433s)
Pushing su binary ....
3742 KB/s (91980 bytes in 0.024s)
Pushing Superuser app
4072 KB/s (996704 bytes in 0.239s)
Making busybox runable ...
.
Pushing fake Backup
3130 KB/s (73728 bytes in 0.023s)
Extracting fakebackup on device ...
Watch now your device. Select the backup named RootMe and restore it!
Starting: Intent { act=android.intent.action.MAIN cat=[android.intent.category.L
AUNCHER] cmp=com.sonyericsson.vendor.backuprestore/.ui.BackupActivity }
If all is successful i will tell you, if not this shell will run forever.
Running ......
Good, it worked! Now we are rebooting soon, please be patient!
Waiting for device to come up again....
Going to copy files to it's place
mount: permission denied (are you root?)
You can close all open command-prompts now!
After reboot all is done! Have fun!
Bin4ry
Drücken Sie eine beliebige Taste . . .
aexme said:
Hi,
I could upgrade today to ICS and wanted to root with the Bin4ry package but i doesn't work
the phone opens the Backup Restore App and there is the RootMe Restore point.
Then I click the Restore buton, Now sometimes I get the Error: "Couldn't restore reconect external memory" and then a reboot and sometimes just a reboot
But no root!
I tried v9, v13 and v15
nothing works.
USB Debuging is active, sd card is removed
help
thanks
Code:
======================================================================
= This script will root your Android phone with adb restore function =
= Script by Bin4ry (thanks to Goroh_kun and tkymgr for the idea) =
= Idea for Tablet S from Fi01_IS01 =
= (13.10.2012) v15 =
======================================================================
Device type:
1) Normal
2) Special (for example: Sony Tablet S, Medion Lifetab)
x) Unroot
Make a choice: 1
Checking if i should run in Normal Mode or special Sony Mode
Please connect your device with USB-Debugging enabled now
1689 KB/s (147059 bytes in 0.085s)
remote object '/system/bin/ric' does not exist
.
Found Sony Backup-Restore.apk
LT26,LT22 etc. mode enabled!
.
Pushing busybox....
2447 KB/s (1085140 bytes in 0.433s)
Pushing su binary ....
3742 KB/s (91980 bytes in 0.024s)
Pushing Superuser app
4072 KB/s (996704 bytes in 0.239s)
Making busybox runable ...
.
Pushing fake Backup
3130 KB/s (73728 bytes in 0.023s)
Extracting fakebackup on device ...
Watch now your device. Select the backup named RootMe and restore it!
Starting: Intent { act=android.intent.action.MAIN cat=[android.intent.category.L
AUNCHER] cmp=com.sonyericsson.vendor.backuprestore/.ui.BackupActivity }
If all is successful i will tell you, if not this shell will run forever.
Running ......
Good, it worked! Now we are rebooting soon, please be patient!
Waiting for device to come up again....
Going to copy files to it's place
mount: permission denied (are you root?)
You can close all open command-prompts now!
After reboot all is done! Have fun!
Bin4ry
Drücken Sie eine beliebige Taste . . .
Click to expand...
Click to collapse
I have the same problem and i think it error because "remote object '/system/bin/ric' does not exist" but now I haven't solution for this problem
aexme said:
Hi,
I could upgrade today to ICS and wanted to root with the Bin4ry package but i doesn't work
the phone opens the Backup Restore App and there is the RootMe Restore point.
Then I click the Restore buton, Now sometimes I get the Error: "Couldn't restore reconect external memory" and then a reboot and sometimes just a reboot
But no root!
I tried v9, v13 and v15
nothing works.
USB Debuging is active, sd card is removed
help
thanks
Code:
======================================================================
= This script will root your Android phone with adb restore function =
= Script by Bin4ry (thanks to Goroh_kun and tkymgr for the idea) =
= Idea for Tablet S from Fi01_IS01 =
= (13.10.2012) v15 =
======================================================================
Device type:
1) Normal
2) Special (for example: Sony Tablet S, Medion Lifetab)
x) Unroot
Make a choice: 1
Checking if i should run in Normal Mode or special Sony Mode
Please connect your device with USB-Debugging enabled now
1689 KB/s (147059 bytes in 0.085s)
remote object '/system/bin/ric' does not exist
.
Found Sony Backup-Restore.apk
LT26,LT22 etc. mode enabled!
.
Pushing busybox....
2447 KB/s (1085140 bytes in 0.433s)
Pushing su binary ....
3742 KB/s (91980 bytes in 0.024s)
Pushing Superuser app
4072 KB/s (996704 bytes in 0.239s)
Making busybox runable ...
.
Pushing fake Backup
3130 KB/s (73728 bytes in 0.023s)
Extracting fakebackup on device ...
Watch now your device. Select the backup named RootMe and restore it!
Starting: Intent { act=android.intent.action.MAIN cat=[android.intent.category.L
AUNCHER] cmp=com.sonyericsson.vendor.backuprestore/.ui.BackupActivity }
If all is successful i will tell you, if not this shell will run forever.
Running ......
Good, it worked! Now we are rebooting soon, please be patient!
Waiting for device to come up again....
Going to copy files to it's place
mount: permission denied (are you root?)
You can close all open command-prompts now!
After reboot all is done! Have fun!
Bin4ry
Drücken Sie eine beliebige Taste . . .
Click to expand...
Click to collapse
I got same problem, I don't know how to proceed !!! what a shame!!!
Hey,
I have the same problem with my sola (6.1.1.B.1.54) too. Do I have to unlock the bootloader before doing this? Isn't there a way to root without unlocking the bl?
Please help!
Thank you
Finally found my way out!!
It seems that the .54 firmware isn't vulnerable to bin4ary's exploit, you need to flash the .10 kernel first, root and the reflash the .54
Instructions:
http://forum.xda-developers.com/showthread.php?t=2029756
http://forum.xda-developers.com/showthread.php?t=2051692
Hope I helped the posters above me
aexme said:
Hi,
I could upgrade today to ICS and wanted to root with the Bin4ry package but i doesn't work
the phone opens the Backup Restore App and there is the RootMe Restore point.
Then I click the Restore buton, Now sometimes I get the Error: "Couldn't restore reconect external memory" and then a reboot and sometimes just a reboot
But no root!
I tried v9, v13 and v15
nothing works.
USB Debuging is active, sd card is removed
help
thanks
Code:
======================================================================
= This script will root your Android phone with adb restore function =
= Script by Bin4ry (thanks to Goroh_kun and tkymgr for the idea) =
= Idea for Tablet S from Fi01_IS01 =
= (13.10.2012) v15 =
======================================================================
Device type:
1) Normal
2) Special (for example: Sony Tablet S, Medion Lifetab)
x) Unroot
Make a choice: 1
Checking if i should run in Normal Mode or special Sony Mode
Please connect your device with USB-Debugging enabled now
1689 KB/s (147059 bytes in 0.085s)
remote object '/system/bin/ric' does not exist
.
Found Sony Backup-Restore.apk
LT26,LT22 etc. mode enabled!
.
Pushing busybox....
2447 KB/s (1085140 bytes in 0.433s)
Pushing su binary ....
3742 KB/s (91980 bytes in 0.024s)
Pushing Superuser app
4072 KB/s (996704 bytes in 0.239s)
Making busybox runable ...
.
Pushing fake Backup
3130 KB/s (73728 bytes in 0.023s)
Extracting fakebackup on device ...
Watch now your device. Select the backup named RootMe and restore it!
Starting: Intent { act=android.intent.action.MAIN cat=[android.intent.category.L
AUNCHER] cmp=com.sonyericsson.vendor.backuprestore/.ui.BackupActivity }
If all is successful i will tell you, if not this shell will run forever.
Running ......
Good, it worked! Now we are rebooting soon, please be patient!
Waiting for device to come up again....
Going to copy files to it's place
mount: permission denied (are you root?)
You can close all open command-prompts now!
After reboot all is done! Have fun!
Bin4ry
Drücken Sie eine beliebige Taste . . .
Click to expand...
Click to collapse
man 1st flash with 6.1.1.B.1.10
and root with binary method
and again flash with 6.1.1.B.1.54
and now you will see supersu or superuser on you menu screen
When i flash to .10 kernal my device says update software version availble but i cant update it from the sonny official site. and secondly my icons turn black,,, plz help
sukhera2 said:
When i flash to .10 kernal my device says update software version availble but i cant update it from the sonny official site. and secondly my icons turn black,,, plz help
Click to expand...
Click to collapse
ya don't update it but the icon is black and its normal now try with that binary root you have to sense the buttons in screen and you have to click restore and after restart your icon will be normal and you will see supersu or superuser on your screen menu...
Hello everyone
I can not get my rooter Haipai 7102, however edsoedso has succeeded. Here : http://forum.xda-developers.com/showthread.php?t=1886460&page=179
I used version 18 of Bin4ry on linux and windows, same result.
That's what I did:
../sudo ./adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
0123456789ABCDEFG device
../sudo ./runme
======================================================================
= This script will root your Android phone with adb restore function =
= Script by Bin4ry (thanks to Goroh_kun and tkymgr for the idea) =
= Idea for Tablet S from Fi01_IS01 =
= (18.12.2012) v17 =
= ported to Linux by Kamistral (15.09.2012), =
= updated by codeworkx (01.10.2012) =
======================================================================
Device type:
1) Normal
2) Special (for example: Sony Tablet S, Medion Lifetab)
x) Unroot
Make a choice:
1
Normal mode enabled!
Checking if i should run in Normal Mode or special Sony Mode
Please connect device with ADB-Debugging enabled now ...
remote object '/system/bin/ric' does not exist
remote object '/system/app/Backup-Restore.apk' does not exist
Normal Mode enabled!
Please connect device with ADB-Debugging enabled now ...
Pushing busybox ...
5267 KB/s (1085140 bytes in 0.201s)
Pushing su binary ...
5385 KB/s (91980 bytes in 0.016s)
Pushing Superuser app
5506 KB/s (996704 bytes in 0.176s)
Pushing ric
1 KB/s (57 bytes in 0.040s)
Making busybox runable ...
Now unlock your device and confirm the restore operation.
Please look at your device and click RESTORE!
If all is successful i will tell you, if not this shell will run forever.
Running ...
Successful, going to reboot your device in 10 seconds!
Waiting for device to show up again ...
Copying files to it's place ...
mount: permission denied (are you root?)
You can close all open command-prompts now!
After reboot all is done! Have fun!
Bin4ry
Press key to exit ...
I don't understand, someone can explain to me
thank you very much
I did a little stupidity :crying:
I completely flash the ROM instead of just flash recovery.
The phone starts with a white screen.
Someone will have he a ROM for this phone?
Reference:
Haipai N7102
Android 4.1
1 GB ram
8 GB rom
1280 * 720 screen
Bump.
Same problem here.
lolo-95 said:
Hello everyone
I can not get my rooter Haipai 7102, however edsoedso has succeeded. Here : http://forum.xda-developers.com/showthread.php?t=1886460&page=179
I used version 18 of Bin4ry on linux and windows, same result.
That's what I did:
../sudo ./adb devices
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
List of devices attached
0123456789ABCDEFG device
../sudo ./runme
======================================================================
= This script will root your Android phone with adb restore function =
= Script by Bin4ry (thanks to Goroh_kun and tkymgr for the idea) =
= Idea for Tablet S from Fi01_IS01 =
= (18.12.2012) v17 =
= ported to Linux by Kamistral (15.09.2012), =
= updated by codeworkx (01.10.2012) =
======================================================================
Device type:
1) Normal
2) Special (for example: Sony Tablet S, Medion Lifetab)
x) Unroot
Make a choice:
1
Normal mode enabled!
Checking if i should run in Normal Mode or special Sony Mode
Please connect device with ADB-Debugging enabled now ...
remote object '/system/bin/ric' does not exist
remote object '/system/app/Backup-Restore.apk' does not exist
Normal Mode enabled!
Please connect device with ADB-Debugging enabled now ...
Pushing busybox ...
5267 KB/s (1085140 bytes in 0.201s)
Pushing su binary ...
5385 KB/s (91980 bytes in 0.016s)
Pushing Superuser app
5506 KB/s (996704 bytes in 0.176s)
Pushing ric
1 KB/s (57 bytes in 0.040s)
Making busybox runable ...
Now unlock your device and confirm the restore operation.
Please look at your device and click RESTORE!
If all is successful i will tell you, if not this shell will run forever.
Running ...
Successful, going to reboot your device in 10 seconds!
Waiting for device to show up again ...
Copying files to it's place ...
mount: permission denied (are you root?)
You can close all open command-prompts now!
After reboot all is done! Have fun!
Bin4ry
Press key to exit ...
I don't understand, someone can explain to me
thank you very much
Click to expand...
Click to collapse
GEEK ....
Person to make me a copy of the ROM Version Haipai N7100 1GB ROM Ram/8Go
Thank you in advance
hello i just purchased a haipai nobble N7102
i bought (online) a hdc N7102 Ram 1gb Rom 8gb
But got delivered a Haipai Nobble N7102 i think 462Ram and 1gbRom and 1,5gb what the phone cals sd (but there is no sd in the card sleeve)
And i insterted a 32gb micro sd in te sd card sleeve
I got some money back because the phone is not as i ordered so thats oke now
*** The problems ***
1. When i (try to) call someone or someone calls me the phone flikkers i can make the but can t hangup.
Because the phone doesn.t reakt
The phone sometime.s doesn.t see the sd card restart then helps (for a while)
I already rooted the phone
Is there a custom rom for this phone that solf this problems??
I also like to put the 1gb and the 1,5gb together
So the phone sees internal 2,5gb an 32gb sd
Instead of 1gb internal and 1,5sd and 32gb sd
Sent from my GT-N7102 using xda app-developers app and yes i,m a noob and this is new for me
Look here: haipainoble.com/en/
Hoping that you will find your happiness .....
I tested N7102 version when the download is finished
ROMs
Do a search on filecrop for n7102 there are a few ROMs on there.
Hi All
recently got myself a n7102 haipai. Is there a exact thread on howto root the unit.
Joseph
any luck anyone?
hi.. i also have a Haipai N7102 running Jelly Bean 4.1.2.
has anyone successfully rooted this phone? please share... tq tq tq..
actually i'm trying to read the DEVICE ID of my device.. is there a way to get the id without having a SU permission?
thanks a million!
I've followed the video of the root method to 100%, every thing looks fine. But after installing the backup, There's no SuperSU and Root Checker tells me It's not rooted. What is the problem.
I'm on ST27i, Android 4.0.4 Version 6.1.1.B.1.54
C:\Windows\system32>cd C:\Root
C:\Root>runme
======================================================================
= This script will root your Android phone with adb restore function =
= Script by Bin4ry (thanks to Goroh_kun and tkymgr for the idea) =
= Idea for Tablet S from Fi01_IS01 =
= (11.03.2013) v21 =
======================================================================
Device type:
1) Normal
2) Special (for example: Sony Tablet S, Medion Lifetab)
3) New Xperia Root by Goroh_kun
x) Unroot
Make a choice: 1
Checking if i should run in Normal Mode or special Sony Mode
Please connect your device with USB-Debugging enabled now
Waiting for device to shop up, if nothing happens please check if Windows ADB-dr
ivers are installed correctly!
2600 KB/s (210390 bytes in 0.079s)
remote object '/system/bin/ric' does not exist
.
Found Sony Backup-Restore.apk
LT26,LT22 etc. mode enabled!
.
Pushing busybox....
3018 KB/s (1085140 bytes in 0.351s)
Pushing su binary ....
3203 KB/s (380532 bytes in 0.116s)
Pushing Superuser app
2547 KB/s (1468798 bytes in 0.563s)
Making busybox runable ...
.
Pushing fake Backup
3130 KB/s (73728 bytes in 0.023s)
Extracting fakebackup on device ...
Watch now your device. Select the backup named RootMe and restore it!
Starting: Intent { act=android.intent.action.MAIN cat=[android.intent.category.L
AUNCHER] cmp=com.sonyericsson.vendor.backuprestore/.ui.BackupActivity }
Warning: Activity not started, its current task has been brought to the front
If all is successful i will tell you, if not this shell will run forever.
Running ......
Good, it worked! Now we are rebooting soon, please be patient!
Waiting for device to come up again....
Going to copy files to it's place
mount: permission denied (are you root?)
You can close all open command-prompts now!
After reboot all is done! Have fun!
Bin4ry
Press any key to continue . . .
Click to expand...
Click to collapse
OsiBasi said:
I've followed the video of the root method to 100%, every thing looks fine. But after installing the backup, There's no SuperSU and Root Checker tells me It's not rooted. What is the problem.
I'm on ST27i, Android 4.0.4 Version 6.1.1.B.1.54
Click to expand...
Click to collapse
.54 cannot be rooted directly using binary.....
There's another method to do so...
You must be on. 54 then flash .10 kernel and then root using binary and then flash the .54 kernel back
Sent from my Xperia Sola using xda app-developers app
Hello,
I have been struggling to root my new tablet for 2 days now without success.
I also have apple devices and jailbreak them for years without any problem but today I am completly stucked.
I am unable to intall correctly the ADB Interface... It is impossible.
I tried to install, desinstall, reinstall many times the usb drivers. Restart the computer many times...
I tried the SDK android tool with installation of the USB driver package v7.
I tried with PDANet.
I tried with the package of Xboxepert guy who posted a very easy way rooting process on xda developper...
Nothing is working.
I still have an exclamation point on the device !!
When I try to install the drivers, it always tells me (sorry for my translation, I am french !!):
"An error occurs during the hardware installation
A service installation section of the INF file is not valid".
I am under XP 32 bits SP3.
I would be very happy if someone knew what to do or help me to go through...
It is driving me crazy ..
Thank you for your help.
Christophe
Rooting problem
It seems that I succeed to set-up the ADB interface.
I can interact with my device with adb.exe in the command prompt shell, things like "adb shell" ...
But I can not root, using motochopper or the tool form xboxepert..
I tried with SRSRoot tool too.
I have made a complete restore of my device from scratch....
Always the same:
cannot stat 'pwn': No such file or directory
Unable to chmod /data/local/tmp/pwn: No such file or directory
[*] Pushing root tools...
1149 KB/s (91980 bytes in 0.078s)
1823 KB/s (1867568 bytes in 1.000s)
1893 KB/s (969701 bytes in 0.500s)
pkg: /data/local/tmp/Superuser.apk
Failure [INSTALL_FAILED_ALREADY_EXISTS]
[*] Rooting device
/system/bin/sh: /data/local/tmp/pwn: not found
[*] Cleaning up...
rm failed for /data/local/tmp/pwn, No such file or directory
[*] Exploit complete. Rebooting device.[*] Waiting for device...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
[*] Flashing CWM Touch Recovery!
1740 KB/s (7045120 bytes in 3.953s)
/system/bin/sh: su: not found
[*] All Done! Final reboot!
solved
I don't know how I made it but I tried a last time and it worked.
Envoyé depuis mon M470BSA en utilisant Tapatalk 4 Beta
Hi, I have a stock Tablet Z on 10.7.A.0.222
I have successfully unlocked the bootloader via instructions on xperia firmware. However I have been unable to root it or install twrp.
I am a complete noob at this but the tablet is running incredibly laggy as stock so want to refresh it. I was using this guide:
https://www.cyanogenmods.org/forums/topic/xperia-tablet-z-cm14-cyanogenmod-14-nougat-7-0-rom/
In that guide I got to 1b which led me to this guide for installing recovery:
https://www.cyanogenmods.org/forums/topic/install-twrp-recovery-android-using-fastboot/
When i try to do step 6 the tablet shuts off and does not go into bootloader mode where I can flash twrp.
Can someone provide direction on what I need to do differently? I have done various searches on this site and I believe there is not a recovery installed in this firmware version or something and that is preventing me from being able to do this step but I am not sure how I get around that.
cward0625 said:
Can someone provide direction on what I need to do differently? I have done various searches on this site and I believe there is not a recovery installed in this firmware version or something and that is preventing me from being able to do this step but I am not sure how I get around that.
Click to expand...
Click to collapse
Hello!
Look at this thread.
Rootk1t said:
Hello!
Look at this thread.
Click to expand...
Click to collapse
Thanks for the response, I had referred to this guide too but was unable to get this step to work for me->
- Root. Follow Bin4ry root : http://forum.xda-developers.com/show....php?t=1886460
Download : http://forum.xda-developers.com/show....php?t=1886460
Below is what I get in the command prompt when doing the steps. When I tried option 4 for new xperia root it did not work...it just hangs here:
======================================================================
= This script will root your Android phone with adb restore function =
= Script by Bin4ry =
= (15.06.2014) v36 =
======================================================================
Device type:
0) New Z2 Root Method by cubeandcube (thanks man!)
1) 2014 root (thx jcase for nice pwn binary and xsacha for the exploit)
2) Xperia Root by cubeundcube
3) New Standard-Root (thx Ariel Berkman)
4) New Xperia Root by Goroh_kun (Xperia Z, Xperia V [JellyBean] ...)
5) Old
6) Old-Special (for example: Sony Tablet S, Medion Lifetab)
G) Google Glass Mode (thx Saurik for the ab file)
x) Unroot
Make a choice: 4
Please connect Xperia device with enabled USB-Debugging now to your Computer
Going to copy over some files ...
33 KB/s (442 bytes in 0.012s)
33 KB/s (170 bytes in 0.004s)
13 KB/s (57 bytes in 0.003s)
Starting restore operation, please look on your device and confirm restore!
after that press anykey here in the console
Now unlock your device and confirm the restore operation.
Press any key to continue . . .
After restore is confirmed please look on your device and choose "Service Tests -> Display" in Service menu and WAIT THERE!"
Starting: Intent { act=android.intent.action.MAIN cmp=com.sonyericsson.android.servicemenu/.ServiceMainMenu }
/data/local/tmp/onload.sh ...
Then if I try option 1 instead I get this (although I do not think this is the correct option anyways:
Device type:
0) New Z2 Root Method by cubeandcube (thanks man!)
1) 2014 root (thx jcase for nice pwn binary and xsacha for the exploit)
2) Xperia Root by cubeundcube
3) New Standard-Root (thx Ariel Berkman)
4) New Xperia Root by Goroh_kun (Xperia Z, Xperia V [JellyBean] ...)
5) Old
6) Old-Special (for example: Sony Tablet S, Medion Lifetab)
G) Google Glass Mode (thx Saurik for the ab file)
x) Unroot
Make a choice: 1
Exploit type:
0) xsacha Z2 Tablet Root
1) jcase Z1S Root (make sure to download the pwn binary first from XDA thread!)
Make a choice: 1
Please connect your device with enabled USB-Debugging ...
Copy needed files ...
4106 KB/s (574722 bytes in 0.136s)
6023 KB/s (104576 bytes in 0.016s)
5317 KB/s (2139595 bytes in 0.392s)
72 KB/s (148 bytes in 0.001s)
1024 KB/s (2092 bytes in 0.001s)
4525 KB/s (1109128 bytes in 0.239s)
Beaups and jcase were here
donations may go here, pleaes say what it was for -> [email protected]
Rebooting device, please wait ...
mount: Permission denied
dd: /system/xbin/su: Read-only file system
chown: /system/xbin/su: No such file or directory
Unable to open /system/xbin/su: No such file or directory
ln: /system/bin/su: Read-only file system
dd: /system/app/Superuser.apk: Read-only file system
chown: /system/app/Superuser.apk: No such file or directory
Unable to open /system/app/Superuser.apk: No such file or directory
dd: /system/xbin/busybox: Read-only file system
chown: /system/xbin/busybox: No such file or directory
Unable to open /system/xbin/busybox: No such file or directory
/data/local/tmp/install_tool.sh[39]: /system/xbin/busybox: not found
mount: Permission denied
"If this helped you please consider donating to the original author jcase: http://forum.xda-developers.com/showpost.php?p=53407127&postcount=1004"
You can close all open command-prompts now!
After reboot all is done! Have fun!
Bin4ry
Press any key to continue . . .
Any ideas on what I am doing wrong or what I need to do differently?
I have rooted my phones before and installed different ROMs but something seems to be off here.
cward0625 said:
Thanks for the response, I had referred to this guide too but was unable to get this step to work for me->
Any ideas on what I am doing wrong or what I need to do differently?
I have rooted my phones before and installed different ROMs but something seems to be off here.
Click to expand...
Click to collapse
forget about root. To install TWRP to FOTA or custom ROM, you don't need it.
Proceed with step 7.
Rootk1t said:
forget about root. To install TWRP to FOTA or custom ROM, you don't need it.
Proceed with step 7.
Click to expand...
Click to collapse
thanks a lot, I did that, got lineage installed, worked fine, then when I followed the directions to install gapps and rebooted it just keeps loading twrp and not to lineage. I tried wiping and starting over and getting the same thing. Is there something I need to do differently? I used gapps arm 7.1 neon 20181118
thanks again
cward0625 said:
thanks a lot, I did that, got lineage installed, worked fine, then when I followed the directions to install gapps and rebooted it just keeps loading twrp and not to lineage. I tried wiping and starting over and getting the same thing. Is there something I need to do differently? I used gapps arm 7.1 neon 20181118
thanks again
Click to expand...
Click to collapse
wiping and installing 14.1 did not work, but when i did 15.1 it did. I think I should be set now.
Thanks