Related
Hi,
I first tried the method below:
Is someone trying to develop a Custom ROM for the Huawei Ascend G600 (U8950D)?
http://forum.xda-developers.com/showthread.php?t=1943003
But the phones are not just different band versions, as mentioned in post 58 of the thread above. The T8950 is not kernal compatible with the U8950D:
http://www.jetdroid.org/forum/viewtopic.php?f=106&t=8383
Indeed, the T8950 is equipped with MTK6517 dual-core processor, the MT6517 and MT6577 are the same, A9 architecture 40nm processor, clock ed speed is 1.0Ghz.
http://defendgun.com/2013/01/22/mobile-customized-huawei-glory-t8950-listed-price-at-261/
I don't pretend to have any knowledge about rooting phones, I just was able to find the correct information on the web. I spend two weeks figuring this out. So I hope I can save somebody else his time with this information.
this is how I did it.
UNLOCKING THE BOOTLOADER
--------------------------------------------------
the bootloader of the T8950 is not locked, so it does not need to be unlocked. Allight, step one done!
INSTALLING THE CMW CUSTOM RECOVERY TOOL
------------------------------------------------------------------------------
The T8950 does indeed not have a fastboot mode. the CWM custom recovery can be installed by flashing the ROM using the Flash tool of Mediatek
tutorial: http://bm-smartphone-reviews.blogspot.com/2012/05/mt6575-flashing-tutorial.htmlthe correct files to use in the tutorial can be found here:
- SP_Flash_Tool_exe_v3.1224.01 --> http://www.mediafire.com/?c8lr368ceaqk7tv
- MediaTek DA USB VCOM drivers --> http://www.mediafire.com/?h0ytkyagj0kf89u
if all went well, you should have a different recovery screen now.
ROOTING
-----------
Tutorial: http://bm-smartphone-reviews.blogspot.com/2012/02/complete-guide-to-clockworkmod-recovery.html
The fileto be used is:
- RootT8950.zip --> http://www.mediafire.com/?je47wz2ozjr7oth
After the update is finished, reboot . Now, you should see Superuser in your Huawei T8950 app list. You can double check if you have root, using the "got root?" app.-->https://play.google.com/store/apps/details?id=com.island51.gotroot
INSTALLING THE GOOGLE SERVICES
----------------------------------------------------------
Since the the CWM custom recovery tool is installed now and the phone is rooted, it's very simple to add the google services to the phone. I used the GAPPS of Cyanogen. You can find them on many places, e.g.
http://www.needrom.com/mobile/gapps-cyanogen/
choose the right version, most likely your T8950 will have android ICS 4.0.4
istallation is the same as installing the rooting ROM
REFERENCES
----------------------
http://bm-smartphone-reviews.blogspot.com/2012/05/mt6575-flashing-tutorial.html
http://bm-smartphone-reviews.blogspot.com/2012/02/complete-guide-to-clockworkmod-recovery.html
http://www.aiothudanu.com/2013/01/huawei-t8950-install-cwm-recovery-and.html
http://forum.xda-developers.com/showthread.php?t=1911475
http://www.needrom.com/mobile/gapps-cyanogen/
Regards,
TeTTiweTTi
Hey TeTTiweTTi!
I can not say how glad I am that you wrote this tutorial. It seems that this is actually the only tutorial on how to truly unlock the T8950 (at least for non russian-speakers )
Still, I'd have some questions:
How do you install the VCOM driver? I downloaded it, but I can only find .inf files.. How do you install them?
Did you flash the whole ROM or just a part of it, as shown in the tutorial? And what exactly happens when you flash the ROM? Are you able to boot afterwards? It seems to just install CWM - right?
How do you apply the update RootT8950.zip?
Help would be appreciated a lot, since you seem to be the only one who knows how to properly do it
Oh and btw: did everything work for you after flashing the ROM? Or did you encounter any errors?
Cheers,
amannn
Hi, it was indeed not so easy to collect these bits and pieces together
here an answer to your questions
1.
The .inf files are the drivers. There are two ways to install the drivers. One way is to right click on the .inf file and choose "Install". The other way is to start the process with SP Flash Tool and as soon as you plug in the phone a new device will be detected and you have the choice to install the drivers.
Also, it is very important to make sure that you click "Download" first before you connect the device. Actually there is a trick, below the sp flash tool, you will see something that says "USB". Click "Download" and wait for the "USB" to become "Searching". Once it is "searching" then connect the USB. SP-Flashtool should be able to capture it before it disconnects itself again.
2.
yes, you only flash a part of the ROM, so you don't need to have all the files in the SP Flash Tool. Only the ones mentioned in the tutorial. Your phone will boot normal, nothing will be changed yet. But now you will have the CWM custom recovery when you start up in recovery mode.
3.
the linked tutorial is quite clear. Let me know if you cannot reach the page or you encounter a problem.
Regards,
TeTTiweTTi
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
Hey TeTTiweTTi!
Thank you very much again for your detailed explanation!
So i think I've installed CWM recovery successful. Therefore, I'm now working on the rooting part.
The RootT8950.zip file needs to be applied, using the "choose zip from sdcard" option from CWM recovery right? When I choose that option, I encounter the error "E:Can't mount /sdcard/". Also when I'm trying to create a backup, it says "Can't mount backup path.". So it seems that there is a problem with accessing the sdcard. I then tried the "mount /sdcard" option, but it also says "Error mounting /sdcard".
Did you have any problem like that? When my phone is booted up, there is no problem with accessing the sd card... Or is there a option how I can check if the sd card is inserted correctly? I guess it's internal and therefore impossible to even remove it..
Your help would be highly appreciated!
Many thanks in advance and best wishes,
amannn
EDIT: I was now able to upload the update with an external micro sd. Therefore everything works so far - thanks again
Similar phone mtk6517 svp s580
Hi
I have this. svp. Phone with ARMV7 ( see cpuz snapshot
)
It says mkt6517 with A5 cortex
I tried jnstalling all drivers linked here for ADB
but windows xp disqualified em as valid drivers for this hardware
Finally I got android device driver to install on
All 3 devices ( see pic- there are 3 devices
That show up )
I don't think this generic driver is the right one
So rooting this is still not done .does anyone hace luck with this device
Any idea ......? With getting the right driver and root
Procedure
I tried eroot too amongst other rooting s/w's
CPU screenshot
CPU screenshot
sieger007 said:
Finally I got android device driver to install on
All 3 devices ( see pic- there are 3 devices
That show up )
I don't think this generic driver is the right one
So rooting this is still not done .does anyone hace luck with this device
Any idea ......? With getting the right driver and root
Procedure
I tried eroot too amongst other rooting s/w's
Click to expand...
Click to collapse
Hi sieger007,
It can be a little bit tricky to install the drivers, since it are .inf files only. But these are the driver files
http://bm-smartphone-reviews.blogspot.be/2012/05/mt6575-flashing-tutorial.html said:
There are two ways to install the drivers. One way is to right click on the .inf file and choose "Install". The other way is to start the process with SP Flash Tool and as soon as you plug in the phone a new device will be detected and you have the choice to install the drivers.
It is very important to make sure that you click "Download" first before you connect the device. Actually there is a trick, below the sp flash tool, you will see something that says "USB". Click "Download" and wait for the "USB" to become "Searching". Once it is "searching" then connect the USB. SP-Flashtool should be able to capture it before it disconnects itself again.
Click to expand...
Click to collapse
This second way worked just fine for me.
You can find the drivers and tools also here
http://mt65xx-tools.4shared.com/
he password to login is bm-smartphone-reviews.blogspot.com.
But always make sure that you trust the sources of the ROM you download and know that it is meant for your phone. After flashing a wrong preloader, your phone will be completely dead (can't be powered on, it will not charge and won't be detected anymore by the computer) and there is no way to recover it.
In order to root you first need to install a custom recovery. In this case it is CWM.
hope this helps
still stuck in driver hell
thanks for your help . I had a previous Chinese MTK (MT6575 ARM A9 cortex ) phone , whose ADB drivers successfully installed when I installed the SDK .
Now this one is MTK6517 ARM A5 Cortex. and none of the methods ( #1 or #2 ) help, in those drivers being recognized.
By method #1 : Right click install - It maybe just copying the driver file to system folder and then on windows would auto detect it when the device is inserted -assuming there is a match .
Method # 2 : Uses the new h/w found dialogue . Not sure if invoking sp_tool is related anyways in invoking that dialogue . It shows up anyways - soon as you plug in the phone .
I could not get the driver files in with the blogspot password to be recognized . Kept giving me "specified location. does not contain info about your h/w msg"
I have the EXACT same problem with ALL drivers hunted on the net , that say MTK driver. Some files say MTK65xx some say MTK_USB_Driver etc.
the h/w ID's and instance IDs associated with the devices are attached .
USB\VID_1782&Pid_5d04&Rev_0229&MI_01
Now the driver.inf file did have one ray of hope with this mention ..wonder if that'd make it compatible with a modified inf file.
But I am lost about HOW to add the h/w ID info ( format and what specific data to add ) to the inf file -most data is of the form VID_eXXX something in that file ( see below quote )
MT6516 USB VCOM drivers\readme.txt
Code:
3. Customers can customize usb2ser_XXX.inf file.
There is a string in the file:
MTK6218 = "USB Modem Driver"
You can modify it for your product name, for example:
MTK6218 = "MY_PRODUCT Modem Driver"
The other perplexing thing is that there are 3 Devices that show up under XP device manager. I managed to get one of em installed as device "android phone" with driver "android ADB interface" from Google and can possibly manage to get ALL of em installed the same way since those device ID's are close ( the last '1' becomes 2 and 3 respectively ) in this
Code:
USB\VID_1782&Pid_5d04&Rev_0229&MI_01
After pushing all these device ID's as "android ADB interface" - and attempting to root- the android rooting s/w's will NOT work at the identification step , erring out with "ADP device not found "- conclusively indicating that those drivers probably did not work well and I ought to look around for better ones - something I am trying to address by this thread.
Lastly - sp_tool when you start it - it will ask for scatter file. The scatter file out there is for MTK6577 (vs my model 6517 ) . If I choose that file - it gives me a warning - yes it out - and click download - it will then just freeze doing nothing
after some more G-mining ( Google) - i found out that I have to stick my VID in that hardware ID's and create an adb_usb.ini file to get the device recognized. Will update on happened next
sieger007 said:
after some more G-mining ( Google) - i found out that I have to stick my VID in that hardware ID's and create an adb_usb.ini file to get the device recognized. Will update on happened next
Click to expand...
Click to collapse
good luck!
That's why I stay away from these little brands. It's very difficult to find good information for it.
found something !!! I hope this is perm and not "leased"
TeTTiweTTi said:
good luck!
That's why I stay away from these little brands. It's very difficult to find good information for it.
Click to expand...
Click to collapse
TeTTiweTTi said:
good luck!
That's why I stay away from these little brands. It's very difficult to find good information for it.
Click to expand...
Click to collapse
ADB driver issue
> adb_usb.ini needed oXXXX as device ID . Where XXXX is the ID that shows up on Device manager. This is detailed here
http://blog.fh-kaernten.at/wehr/?p=1182
after that there will be 2 yellow marks for the rest of the unknowns in device manager. for this you have to modify the .inf file to include the entire h/w ID strings. I guess that makes just about any driver get along with anyone unknown - so here I am not sure if showing them as the such h/w by changing the driver files - gives them the actual intended functionality or all it does it just makes the device manager look clean without yellow marks. Maybe someone could help expand the talk here
[
Code:
android_winusb.inf
%SingleAdbInterface% = USB_Install, USB\VID_0BB4&PID_0C01
%CompositeAdbInterface% = USB_Install, USB\VID_1782&PID_5D04&MI_01
/*ADDED*/
%CompositeAdbInterface% = USB_Install, USB\VID_1782&PID_5D04&MI_02
%CompositeAdbInterface% = USB_Install, USB\VID_1782&PID_5D04&MI_03
So with that - I get 1 ADB interface and 3 devices show up under "com and LPT" - alright that completes the drivers
ROOTING
I found this Chinese rooting program Vroot . I still have'nt figured out what exactly it means but it looks like it DID root that sucker after all. I tested with one app - root checker - got an dialogue in Chinese , asking me whether to give or not and I think I said Y but that app still does not say I have root. Its probably the apps thats at fault because I can get Linked2SD do ALL the stuff it would be doing running as root - .e.g force move programs to SD to free up space etc.
If someone out there can make English out of that and tell me if its mine to keep or leased out ( trial ) - that'd be damn nice !!!
ROMS
- WIP- when I get some more time
the chinese rooting program - now hiring English interpreters
the chinese rooting program - now hiring English interpreters
sieger007 said:
ADB driver issue
> adb_usb.ini needed oXXXX as device ID . Where XXXX is the ID that shows up on Device manager. This is detailed here
http://blog.fh-kaernten.at/wehr/?p=1182
after that there will be 2 yellow marks for the rest of the unknowns in device manager. for this you have to modify the .inf file to include the entire h/w ID strings. I guess that makes just about any driver get along with anyone unknown - so here I am not sure if showing them as the such h/w by changing the driver files - gives them the actual intended functionality or all it does it just makes the device manager look clean without yellow marks. Maybe someone could help expand the talk here
[
Code:
android_winusb.inf
%SingleAdbInterface% = USB_Install, USB\VID_0BB4&PID_0C01
%CompositeAdbInterface% = USB_Install, USB\VID_1782&PID_5D04&MI_01
/*ADDED*/
%CompositeAdbInterface% = USB_Install, USB\VID_1782&PID_5D04&MI_02
%CompositeAdbInterface% = USB_Install, USB\VID_1782&PID_5D04&MI_03
So with that - I get 1 ADB interface and 3 devices show up under "com and LPT" - alright that completes the drivers
ROOTING
I found this Chinese rooting program Vroot . I still have'nt figured out what exactly it means but it looks like it DID root that sucker after all. I tested with one app - root checker - got an dialogue in Chinese , asking me whether to give or not and I think I said Y but that app still does not say I have root. Its probably the apps thats at fault because I can get Linked2SD do ALL the stuff it would be doing running as root - .e.g force move programs to SD to free up space etc.
If someone out there can make English out of that and tell me if its mine to keep or leased out ( trial ) - that'd be damn nice !!!
ROMS
- WIP- when I get some more time
Click to expand...
Click to collapse
sieger007 said:
the chinese rooting program - now hiring English interpreters
Click to expand...
Click to collapse
Post some screenshots of the text you want translated and I will ask the help of one of my Chinese colleagues.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
some screenshots of the text you want translated
here goes ..thank you . Combined several screens together in '4 lets '
TeTTiweTTi said:
Post some screenshots of the text you want translated and I will ask the help of one of my Chinese colleagues.
Sent from my ASUS Transformer Pad TF700T using xda app-developers app
Click to expand...
Click to collapse
sieger007 said:
here goes ..thank you . Combined several screens together in '4 lets '
Click to expand...
Click to collapse
ROM Basic Information Huawei T8950 Emotion UI 1.6 official pure version of the card brush pack
Author: Hay.
Size: 398MB
Android Version: 4.1.2
UI type: official factory style
Suitable models: Huawei T8950
Release date: 2013-07-31
MD5 code: F7A21630317EE4239DC145E75FF8A276
ROM presentation
1, based on the official code base package and Qualcomm made to upgrade to 4.1.2
2, emui upgrade to 1.6
3, repair legendary SMS unlit issue
4, full root privileges
5, caused during an upgrade wifi loss problem to fix
6, clean up some pit length useless underlying file
7, adjust the signal and the network connection speed
8 streamlining TTS voice database file
9, usb debugging is enabled by default
10 to adjust the overall Desktop Note: Upgrading from 4.0 to 4.1 need to upgrade Bottom bag bottom package
download address: http://pan.baidu.com/share/link?shareid=805743044&uk=137718883
recover before upgrade to upgrade the official recovery Brush back REC official and third-party tools
brush download address: HTTP :/ / pan.baidu.com / share / link? shareid = 807162397 & uk = 137718883
1.6 EMUI ROM Download: http://t.cn/zQWgp1r
3G not accessible
Hi again,
so I've been struggling with another issue.
Somehow my T8950 isn't capable of connecting to the 3G network of my carrier. When I search for networks, only the 2G networks are being found.
Does anybody have a clue why that is and how to solve that problem? My carrier is from Austria and is called "tele.ring" which is operated by T-Mobile.
I'd really appreciate your help, since 2G is reaaally slow for data connections
EDIT: I just tried allowing my phone only to connect to 3G networks by using the Network app from Philipp Mangelow (which shows the same menu as if you dial *#*#4636#*#* as i just found out). This results into no 3G networks being found at all.. I thought maybe the problem occurs because I'm always connected in roaming mode. As I bought the phone in China, it seems to believe that i need to be in roaming mode to connect to my local carrier. However, I have a local SIM-card, so this is somewhat weird..
EDIT 2: So after some googling I've found out that China has the TD-SCDMA radio interface for 3G (at least China Mobile, and that's from where I've bought the phone), but in europe it's W-CDMA.. Remains the question how to change that (if possible at all)..
EDIT 3: So I've wrote an email to Huawei about the issue, and that's the reply:
Sorry that T8950 doesn’t support the W-CDMA mode.
Below please kindly check the frequence band of T8950 for your reference.
• GSM/EDGE:900/1800/1900MHz
• TD-SCDMA:A frequency(2010-2025MHz)/F frequency(1880-1920MHz)
So that means that there is nothing i can do about it?
Thanks and all the best,
amannn
amannn said:
Hi again,
so I've been struggling with another issue.
Somehow my T8950 isn't capable of connecting to the 3G network of my carrier. When I search for networks, only the 2G networks are being found.
Does anybody have a clue why that is and how to solve that problem? My carrier is from Austria and is called "tele.ring" which is operated by T-Mobile.
I'd really appreciate your help, since 2G is reaaally slow for data connections
EDIT: I just tried allowing my phone only to connect to 3G networks by using the Network app from Philipp Mangelow (which shows the same menu as if you dial *#*#4636#*#* as i just found out). This results into no 3G networks being found at all.. I thought maybe the problem occurs because I'm always connected in roaming mode. As I bought the phone in China, it seems to believe that i need to be in roaming mode to connect to my local carrier. However, I have a local SIM-card, so this is somewhat weird..
EDIT 2: So after some googling I've found out that China has the TD-SCDMA radio interface for 3G (at least China Mobile, and that's from where I've bought the phone), but in europe it's W-CDMA.. Remains the question how to change that (if possible at all)..
EDIT 3: So I've wrote an email to Huawei about the issue, and that's the reply:
Sorry that T8950 doesn’t support the W-CDMA mode.
Below please kindly check the frequence band of T8950 for your reference.
• GSM/EDGE:900/1800/1900MHz
• TD-SCDMA:A frequency(2010-2025MHz)/F frequency(1880-1920MHz)
So that means that there is nothing i can do about it?
Thanks and all the best,
amannn
Click to expand...
Click to collapse
No, unfortunatly not. this is not a software setting, but a different hardware chip. my t8950 also does not support 3G in Belgium
TeTTiweTTi said:
No, unfortunatly not. this is not a software setting, but a different hardware chip. my t8950 also does not support 3G in Belgium
Click to expand...
Click to collapse
Mmmmh, ok – that's what i thought too.
Thank you very much anyway for your response TeTTiweTTi!
I bought a Mediapad X1 from China via AliExpress.
I cannot make anything from a limited Chinese ROM.
Anybody who has international ROM or can extract it from the international version, please help!
satawat.thongsawat said:
I bought a Mediapad X1 from China via AliExpress.
I cannot make anything from a limited Chinese ROM.
Anybody who has international ROM or can extract it from the international version, please help!
Click to expand...
Click to collapse
The international version hasn't been released yet... I bought mine (4G version) through Lenteen from Hong-Kong, and everythings works fine ! I installed google apps, rooted my phone
I know that Huawei was supposed to release it at the end of may in France but any news nowhere on the web... none even from Huawei themself !
So we just have to wait and see...
gregou said:
The international version hasn't been released yet... I bought mine (4G version) through Lenteen from Hong-Kong, and everythings works fine ! I installed google apps, rooted my phone
I know that Huawei was supposed to release it at the end of may in France but any news nowhere on the web... none even from Huawei themself !
So we just have to wait and see...
Click to expand...
Click to collapse
Does it sync your Google contacts correctly? If so, what did you need to do to get that working?
gregou said:
The international version hasn't been released yet... I bought mine (4G version) through Lenteen from Hong-Kong, and everythings works fine ! I installed google apps, rooted my phone
I know that Huawei was supposed to release it at the end of may in France but any news nowhere on the web... none even from Huawei themself !
So we just have to wait and see...
Click to expand...
Click to collapse
Thank you for the reply, some questions:
1. So, yours is also a Chinese version?
2. Please post the link for rooting.
3. After rooting, install the GApp, version for 4.2.2? And then we can go for anything, like Nova launcher?
satawat.thongsawat said:
Thank you for the reply, some questions:
1. So, yours is also a Chinese version?
2. Please post the link for rooting.
3. After rooting, install the GApp, version for 4.2.2? And then we can go for anything, like Nova launcher?
Click to expand...
Click to collapse
So yes it's also a chinese version, but it's the 4G chinese version.
TUTO FOR ROOTING :
Here is the procedure for your rooter Huawei Mediapad X1/Honor X1:
Here's what you need:
MediaPad Huawei X1
A micro USB to USB cable
PC
Root Genius software at the following address : http://www.shuame.com/en/root/
Now to root your device : (This method works with B002 Chinese version, not tested on others number firmwares)
1 - Enable developer mode on Huawei MediaPad X1 in Settings> About phone
Press several times on the box " build number " until a message announcing the activation of developer mode
Connect your Huawei MediaPad X1.
2 - In the notification bar choose the Hi Suite mode and let the PC detected the device
3 - Start the Root Genius you previously downloaded, it will automatically detect your device, it only remains for you to click on the ROOT button and wait
4 - If all went well , you should have a message of congratulations . In addition, a new application called King User will be installed on your device.
Now you can use apps that require root such as Titanium Backup , Root Explorer, etc. . You 'll also be able to uninstall applications or games you do not want and which are pre-installed on the device.
If you have any questions do not hesitate!
P.S : If anything goes wrong that's your entire responsability !
---------- Post added at 05:22 AM ---------- Previous post was at 05:15 AM ----------
TUTO TO GET ALL GAPPS (INCLUDED CONTACTS SYNC)
As you know , the Chinese version of the Huawei Mediapad do not get Google applications .
*
Here is the procedure to have them all , including the synchronization of contacts !
*
*What you need:
Huawei Mediapad Honor X1 (chinese version) Your phone must be already rooted ! ( follow the tutorial i posted earlier)
A file explorer that supports the administration ROOT rights (root explorer, es file explorer , etc. . ) Available on Google Play Store
There is nothing very complicated , just follow the tutorial :
Open your file explorer supporting the rights adminstration ROOT
Go to the following folder
/ cust / channel / charm_china_u / xml /
You will find the file UNSTALL_APK.XML
Rename it to : UNSTALL_APK.XML.OLD
This is done !
Restarting the Huawei Honor Mediapad/Honor X1 , applications will be automatically downloaded and installed on the phone and you will have access to all Google services including synchronization of contacts !
*
WARNING: by doing this manipulation, future updates will no longer be compatible with the device and you will have to rename the file UNSTALL_APK.XML.OLD to UNSTALL_APK.XML to update the device. Otherwise, you can make a copy of the original file that you can keep safe somewhere on your phone or computeur.
If anything goes wrong that's your entire responsability !
http://consumer.huawei.com/cn/mobile-phones/support/downloads/honour-x1-cn.htm
vyming said:
http://consumer.huawei.com/cn/mobile-phones/support/downloads/honour-x1-cn.htm
Click to expand...
Click to collapse
This is a Chinese ROM?
gregou said:
So yes it's also a chinese version, but it's the 4G chinese version.
TUTO FOR ROOTING :
Here is the procedure for your rooter Huawei Mediapad X1/Honor X1:
Here's what you need:
MediaPad Huawei X1
A micro USB to USB cable
PC
Root Genius software at the following address : http://www.shuame.com/en/root/
Now to root your device : (This method works with B002 Chinese version, not tested on others number firmwares)
1 - Enable developer mode on Huawei MediaPad X1 in Settings> About phone
Press several times on the box " build number " until a message announcing the activation of developer mode
Connect your Huawei MediaPad X1.
2 - In the notification bar choose the Hi Suite mode and let the PC detected the device
3 - Start the Root Genius you previously downloaded, it will automatically detect your device, it only remains for you to click on the ROOT button and wait
4 - If all went well , you should have a message of congratulations . In addition, a new application called King User will be installed on your device.
Now you can use apps that require root such as Titanium Backup , Root Explorer, etc. . You 'll also be able to uninstall applications or games you do not want and which are pre-installed on the device.
If you have any questions do not hesitate!
P.S : If anything goes wrong that's your entire responsability !
---------- Post added at 05:22 AM ---------- Previous post was at 05:15 AM ----------
TUTO TO GET ALL GAPPS (INCLUDED CONTACTS SYNC)
As you know , the Chinese version of the Huawei Mediapad do not get Google applications .
*
Here is the procedure to have them all , including the synchronization of contacts !
*
*What you need:
Huawei Mediapad Honor X1 (chinese version) Your phone must be already rooted ! ( follow the tutorial i posted earlier)
A file explorer that supports the administration ROOT rights (root explorer, es file explorer , etc. . ) Available on Google Play Store
There is nothing very complicated , just follow the tutorial :
Open your file explorer supporting the rights adminstration ROOT
Go to the following folder
/ cust / channel / charm_china_u / xml /
You will find the file UNSTALL_APK.XML
Rename it to : UNSTALL_APK.XML.OLD
This is done !
Restarting the Huawei Honor Mediapad/Honor X1 , applications will be automatically downloaded and installed on the phone and you will have access to all Google services including synchronization of contacts !
*
WARNING: by doing this manipulation, future updates will no longer be compatible with the device and you will have to rename the file UNSTALL_APK.XML.OLD to UNSTALL_APK.XML to update the device. Otherwise, you can make a copy of the original file that you can keep safe somewhere on your phone or computeur.
If anything goes wrong that's your entire responsability !
Click to expand...
Click to collapse
@gregou
I cannot get into download mode to install Gapps via odin.
Also cannot find recovery mode???
How to install Gapps,then??
satawat.thongsawat said:
@gregou
I cannot get into download mode to install Gapps via odin.
Also cannot find recovery mode???
How to install Gapps,then??
Click to expand...
Click to collapse
When the phone reboot, after you renamed the file, gapps are automatically installed by the phone.. You don't have to use recovery mode at all !!
And for now, i'm not sure that CWM is available for this model... I think i saw it on a chinese forum but when i translate it's too messy and i have to be registered on this forum to download it so... we have to wait that someone make a post here in english with th e CWM in download...
gregou said:
When the phone reboot, after you renamed the file, gapps are automatically installed by the phone.. You don't have to use recovery mode at all !!
And for now, i'm not sure that CWM is available for this model... I think i saw it on a chinese forum but when i translate it's too messy and i have to be registered on this forum to download it so... we have to wait that someone make a post here in english with th e CWM in download...
Click to expand...
Click to collapse
Okay, I see the point, we just install portions of Google apps we need, starting with play store, the any thing you need.
I do hope we'll have CWM, or at least hardware ways to boot into download and recovery mode.
The KitKat may be far from reality?
satawat.thongsawat said:
Okay, I see the point, we just install portions of Google apps we need, starting with play store, the any thing you need.
I do hope we'll have CWM, or at least hardware ways to boot into download and recovery mode.
The KitKat may be far from reality?
Click to expand...
Click to collapse
We'll get Kikat firmware on this phone for sure, we just have to wait from Huawei to rolling out this version.
It's not portions of google apps as when you do this procedure i explained, ALL the gapps are installed automatically on the phone.
Basically, Huawei made a script in the phone for not allowing these apps to be installed, but when you rename this file, the script is no longer available, then all the gapps are installing after the next reboot !
Mediapad X1 7D-503L
The only deference is the directory:
/ cust / channel / charm_china_l / xml / ( charm_china_l not charm_china_u)
and i use the command as su
mount -o rw,remount -t rootfs /cust
because when It try to rename the UNSTALL_APK.XML I take the error "Read-only file system"
thanks
X1 undetectable by the PC
I have GApps Syncing quite fine without rooting, except the contacts sync which is missing from the sync list. I see your steps are very straight forward, but unfortunately my X1 is not recognized by the PC, although I've installed HiSuite from Huawei website. I've also tried to install Huawei device driver for X1 from this site, but still unrecognized. Accordingly GeniusRoot is unable to detect and root my X1.
I'm Win 8.1 (both 32 and 64 bits), and I've tried to do all these procedures with Compatibility model for Win7, run as administrator, yet the X1 is till not detected by the PC.
Also USB Debugging is enabled in Developer Options.
Any idea what's the reason for this?
More info about my version:
Baseband: 21.529.00.00.000
Kernel: 3.0.8-01317-gcd83a45 [email protected] #1
Build Number: 7D-501uV100R001C233B013
gregou said:
So yes it's also a chinese version, but it's the 4G chinese version.
TUTO FOR ROOTING :
Here is the procedure for your rooter Huawei Mediapad X1/Honor X1:
Here's what you need:
MediaPad Huawei X1
A micro USB to USB cable
PC
Root Genius software at the following address :
Now to root your device : (This method works with B002 Chinese version, not tested on others number firmwares)
1 - Enable developer mode on Huawei MediaPad X1 in Settings> About phone
Press several times on the box " build number " until a message announcing the activation of developer mode
Connect your Huawei MediaPad X1.
2 - In the notification bar choose the Hi Suite mode and let the PC detected the device
3 - Start the Root Genius you previously downloaded, it will automatically detect your device, it only remains for you to click on the ROOT button and wait
4 - If all went well , you should have a message of congratulations . In addition, a new application called King User will be installed on your device.
Now you can use apps that require root such as Titanium Backup , Root Explorer, etc. . You 'll also be able to uninstall applications or games you do not want and which are pre-installed on the device.
If you have any questions do not hesitate!
P.S : If anything goes wrong that's your entire responsability !
---------- Post added at 05:22 AM ---------- Previous post was at 05:15 AM ----------
TUTO TO GET ALL GAPPS (INCLUDED CONTACTS SYNC)
As you know , the Chinese version of the Huawei Mediapad do not get Google applications .
*
Here is the procedure to have them all , including the synchronization of contacts !
*
*What you need:
Huawei Mediapad Honor X1 (chinese version) Your phone must be already rooted ! ( follow the tutorial i posted earlier)
A file explorer that supports the administration ROOT rights (root explorer, es file explorer , etc. . ) Available on Google Play Store
There is nothing very complicated , just follow the tutorial :
Open your file explorer supporting the rights adminstration ROOT
Go to the following folder
/ cust / channel / charm_china_u / xml /
You will find the file UNSTALL_APK.XML
Rename it to : UNSTALL_APK.XML.OLD
This is done !
Restarting the Huawei Honor Mediapad/Honor X1 , applications will be automatically downloaded and installed on the phone and you will have access to all Google services including synchronization of contacts !
*
WARNING: by doing this manipulation, future updates will no longer be compatible with the device and you will have to rename the file UNSTALL_APK.XML.OLD to UNSTALL_APK.XML to update the device. Otherwise, you can make a copy of the original file that you can keep safe somewhere on your phone or computeur.
If anything goes wrong that's your entire responsability !
Click to expand...
Click to collapse
Thanks for the awesome tutorial bro
I've managed to root the phone, installed es files explorer. Double checked with root checker and confirmed root
But I'm stuck with renaming the file...
And the folder have a slightly different name but that is the only folder I've got..
/cust/channel/charm_china_l/xml/ (yours is china_u)
So, everytime I rename the file it keeps on giving error task failed. I've checked in properties and it says readable:yes writable:yes
I can't delete the file as well the error says unstall_apk.xml cannot be deleted
can u help please
thanks in advance :good:
sordanny said:
Thanks for the awesome tutorial bro
I've managed to root the phone, installed es files explorer. Double checked with root checker and confirmed root
But I'm stuck with renaming the file...
And the folder have a slightly different name but that is the only folder I've got..
/cust/channel/charm_china_l/xml/ (yours is china_u)
So, everytime I rename the file it keeps on giving error task failed. I've checked in properties and it says readable:yes writable:yes
I can't delete the file as well the error says unstall_apk.xml cannot be deleted
can u help please
thanks in advance :good:
Click to expand...
Click to collapse
OK I managed to figure out the solution
Used Root File Manager to rename and voila!! Renamed the file, restart device and got all the Google stuff setup on the phone
Now there is this second problem which is a big pain in the arse
I can't add a second Google account on the phone to get all my contacts..........
Under settings -> accounts -> add account -- there is no option to select "Google" !!!!
Have anyone also face this problem and is there any solution??
Thanks in advance for the help
Guys, you do not need root or tricks to install Google stuff.
Open the Huawei app market. Search for Google. Click on the big Google banner at the top of the page. You get a dedicated page of Google stuff. There you have download links for play store, all the Google apps, and if you can figure out a little Chinese, calendar sync and contact sync software too.
ralphrmartin said:
Guys, you do not need root or tricks to install Google stuff.
Open the Huawei app market. Search for Google. You get a dedicated page of Google stuff. There you have download links for play store, all the Google apps, and if you can figure out a little Chinese, calendar sync and contact sync software too.
Click to expand...
Click to collapse
I can confirm this is true. I did a search for "gms" rather than Google - tap on the big link you get at the top of the results page, which takes you to a page of all the Google apps and services, and install everything! (You can always uninstall what you don't need later). No root required, and everything is syncing properly - calendar, contacts, tasks etc. Super easy.
ralphrmartin said:
Guys, you do not need root or tricks to install Google stuff.
Open the Huawei app market. Search for Google. Click on the big Google banner at the top of the page. You get a dedicated page of Google stuff. There you have download links for play store, all the Google apps, and if you can figure out a little Chinese, calendar sync and contact sync software too.
Click to expand...
Click to collapse
This worked for me too. I installed all google apps and everthing syncs except I still cant sync contacts or have more than one google account.
So frustrated
DannyBoy said:
This worked for me too. I installed all google apps and everthing syncs except I still cant sync contacts or have more than one google account.
So frustrated
Click to expand...
Click to collapse
Have you got Google Contacts Sync in your list of downloaded apps?
DannyBoy said:
This worked for me too. I installed all google apps and everthing syncs except I still cant sync contacts or have more than one google account.
So frustrated
Click to expand...
Click to collapse
Danny here's how to fix it, and u don't need root
if u have rooted and edited the unstall_apk.xml, best is download and flash the stock ROM first:
http://consumer.huawei.com/cn/support/downloads/detail/index.htm?id=20241 (click 立即下载 on the right)
u can also ignore it but all preinstalled google apps will become system apps, and if u've deleted some huawei bloatware u might not be able to OTA update latest B006 firmware
All the Google stuff can work perfectly even can add multiple Google accounts. Best thing is, u don't need root. Here's how:
1) Go to app centre - all - brand and look for the one with 谷歌 (sorry I've updated app centre and it might be different if u haven't update)
2) Download 联系人同步服务, 日历同步服务, Google Playstore, Gmail and Google plus. The rest can be downloaded from playstore
3) After install, open either playstore or gmail and sign in
At this stage, Google is already setup properly with contacts sync just it cannot add multiple Google accounts. Workaround:
4) Open Google plus. Settings - add account
And voila. The phone is perfect now
There's also an OTA update for the LTE version which updates your phone firmware to 7D-503LV100R001C233B006
Cool new features includes double tap screen on, some control over notification flash light for messages and background battery optimization :good:
[WINDOWS ][ALL ANDROID DEVICES][REMOTE DESKTOP]
Hey guys,
First of all I apologise for what i posted before...the fake one which I came to know now. Instead now I'm going to show you how to use your android device as a remote desktop.
YOU NEED
1. A Android Device
2. PC/Laptop Running Windows
3. Internet{IN PC} And Wi-Fi
4.Splashtop [ Link given]
INSTRUCTIONS
1. Download the splashtop.exe (Check Post #2)
2.Install splashtop_personal in your PC and open the app.
3. Create a splashtop account and login again.
4. Now go to this website and download streamer which is on the right top of the webpage and install that.
5.Open splsttop streamer and log in with your spalshtop account.
6. Now install splashtop in your device from here
Mod edit: Link removed.
7. Log in with your splashtop account in your device ........now you should see your desktop on your device.
you should be able to do anything that you can do in your pc.........
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
Sorry for the previous fake post........
HOPE YOU LIKE MY POST. PLEASE HIT THANKS, IT HELPS ME.
Credits
@Quarx For proving it as Fake.
Splashtop team.
DOWNLOADS
LINK OF 'Splashtop.exe'
Splashtop.exe - Mod edit: Link removed.
you can download Splashtop streamer also in the above link.
THIS IS MUCH FASTER THAN WINDOWS REMOTE DESKTOP.
good
can we get some ss..?
This looks like a scam. Be careful guys.
Sent using Taptalk
Source code anywhere? I'm reporting this thread...
I actually tried this in my Galaxy Tab 2.
I actually got my tab back. It just bricked my tab , It changed my boot logo to the windows one and it bricked my tab.
I apologise for my post which turned out to be fake..
Check my post#1 for using remote desktop.
SORRY FOR THE FAKE POST
CHECK POST#1
Can't be actual windows 8. If it was would have been the one of the biggest things to come to android phones.
I dont know, but i checked website http://changemysoftware.org/CMSxpEdition
Install Windows XP on your Android device. ?!?
One click, no root, any device, zero proofs..... seems legit.
I just checked, exe file not linked with any dll libs included in zip.
device_test.dll just dll with enabled debug and conatin all symbols, to make file bigger.
8edidl.dll not even have elf header. Open this file with notepad... " change my software change my software change my software "
netconfwizard.xrc and quickconnectbar.xrc from filezilla app...
Exe file just ui without any functional..
They just want try get money from "filehostingname" by downloading files...
Fake. Please close this thread :laugh:
:cyclops::cyclops::cyclops:
adonbillivit
Quarx said:
I dont know, but i checked website http://changemysoftware.org/CMSxpEdition
Install Windows XP on your Android device. ?!?
One click, no root, any device, zero proofs..... seems legit.
I just checked, exe file not linked with any dll libs included in zip.
device_test.dll just dll with enabled debug and conatin all symbols, to make file bigger.
8edidl.dll not even have elf header. Open this file with notepad... " change my software change my software change my software "
netconfwizard.xrc and quickconnectbar.xrc from filezilla app...
Exe file just ui without any functional..
They just want try get money from "filehostingname" by downloading files...
Fake. Please close this thread :laugh:
Click to expand...
Click to collapse
So much "proof" haha Please close this thread
I'M SORRY GUYS.....I FOUND OUT IT TO BE FAKE
IT ACTUALLY BRICKED MY TAB 2 AND IT JUST INSTALLED WINDOWS BOOT LOGO ONTO MY TAB.......:silly:
I FOUND A NEW WAY TO USE YOUR DESKTOP OR PC REMOTELY ON YOUR DEVICE!!!!!!!!!!!!
ATLEAST HIS IS OFFICIAL!!!!!!
CHECK POST #1 , I'M GONNA EDIT IT...
ONCE AGAIN I'M SORRY FOR THIS MISTAKE
Quarx said:
I dont know, but i checked website http://changemysoftware.org/CMSxpEdition
Install Windows XP on your Android device. ?!?
One click, no root, any device, zero proofs..... seems legit.
I just checked, exe file not linked with any dll libs included in zip.
device_test.dll just dll with enabled debug and conatin all symbols, to make file bigger.
8edidl.dll not even have elf header. Open this file with notepad... " change my software change my software change my software "
netconfwizard.xrc and quickconnectbar.xrc from filezilla app...
Exe file just ui without any functional..
They just want try get money from "filehostingname" by downloading files...
Fake. Please close this thread :laugh:
Click to expand...
Click to collapse
^^This.
Thread closed.
Can somebody tell me if the T-Mobile Revvl Plus (made by Alcatel) uses Alcatel's first-party Play Store apps? It's hard to find much information about this phone without having it in hand.
Jaxidian said:
Can somebody tell me if the T-Mobile Revvl Plus (made by Alcatel) uses Alcatel's first-party Play Store apps? It's hard to find much information about this phone without having it in hand.
Click to expand...
Click to collapse
I believe the Revvl Plus+ is made by Coolpad ... unless 2 separate manufacturers are doing the deed.
My daughter's phone comes up as Coolpad (Yulong) with online model searches and within listed Google devices attached to her account.
All gleaned information after trying to sync her device to her computer in order to transfer files. The built in software that's provided (the pop up D\: driver-setup - actual name forgotten) once phone is plugged into USB is a little convoluted.
Image transfer worked fine without any software installation but the MTP (media files) was a bugger to setup in order to view within Windows Explorer. If anyone else has this issue ... best way I found to navigate it was to install from the popup (which just placed the needed software into a directory), open device manager, click on whatever the device is listed as (composite or android device - I forget) then update driver from the properties tab, search computer for driver, direct it to the folders installed from the D:\ popup. Do the same for android (adb) and composite device listed within device manager. Works like it should now. I had first tried to update drivers directly from the D:\ setup but that's strictly for installation purposes. Just install from that location then remember where you installed it to (the default is C:\Program Files (x86)\yulong).
Well ... if there wasn't any support information for this creeton device before ... there is now.
Thanks for your reply. I guess I misunderstood who made this phone. I thought it was Alcatel but apparently not! Thanks for that correction.
I have just started playing scrabble on Windows 11 with the emulator LDPlayer.
At the moment I have to go to the playstore to open the scrabble app. Surely there a way of having a shortcut on the LDPlayer homerscreen? Have searched hard but can't find anything - anyone?
Also is there an adblocker that will work with this?
Install WSA ( Windows Subsystem for Android ) and run the game within it.
The app is supposed to appear in the homescreen after you install it. Clear disk cache from LD Player Settings > Advanced (located at bottom). Install the APK version, the shortccut should appear hopefully. If nothing works, you can always create a new instance. MEmu (memuplay) emulator lets you create desktop shortcut for apps installed in it, might wanna give it a try.
Lookeed into this a couple of times but I can see nowhere in the Bios where virtualisation is mention.
TheMaverick1953 said:
Lookeed into this a couple of times but I can see nowhere in the Bios where virtualisation is mention.
Click to expand...
Click to collapse
What's your motherboard model? In Asus board it's called SVM (Secure Virtualization Mode), or VMX. User manual should point it's existence at the end.
Belarc says:
Board: HP 8437 1.3
Serial Number: PGUCR0HP1B90LD
Bus Clock: 100 megahertz
UEFI: AMI F.53 10/23/2020
Please search thoroughly, it must be there somewhere. This guide might help -
HP PCs - Enable Virtualization Technology in the BIOS | HP® Customer Support
Learn how to enable or disable hardware virtualization technology on your computer in the BIOS. Virtualization Technology might be required for some features of Windows or other apps to work.
support.hp.com
Still no sign of virtualisation
attachment to above
The article says to look into security tab, can you provide an image of that?