Hello, how to root Op3n Dott P4502 ?
I tested some programs on google play and on my pc, and it can't root my mobile
Can someone help me with root ?
Thanks.
@refresh
I too need this, pls answer.
1. Download and install apk from google play "MTK Engineering Mode"
2. In this apk "MTK Settings->Log and Debugging->User2Root" push "Root" button and exit apk.
3. Switch on "Debugging Mode" in phone:
-open up Settings, then scroll all the way down to About phone. Once there, tap Software information, then tap Build number seven times. You'll see a toast notification alerting you that you are now a developer.
- go back to the main Settings page and you'll see a new entry for Developer options. In this menu check USB debugging
4. Download and install this program iRoot, (download with IE beacuse firefox see dangerous file)
5. Run iRoot and connect phone to PC
6. Choose "Connect" and then "Root"
7. Unistall 2 chineese aplication, and install "Supersu" from google play (after restart update "supersu")
8. You have root.
I use chineese supersu beacuse this from google play have problem with permission to sdcard.
-----
Recovery Instalation:
1. Download recovery and copy it to /data/local/temp (change filename to recovery.img)
2. Installanr run Terminal emulator.
3. type:
su
dd if=/data/local/tmp/recovery.img of=/dev/recovery
4. Now reboot to recovery and make backup.
-----
Link to hungary forum Link
Thank you very much!
Rom for Medion p4502
I do the same but the phone is block in a boot loop.
When i start with the button "on" and "volume Up", i have a special screen with "No command" writed.
Then using the buttons under the screen i have a menu seems to a cm recovery.
Is there a rom for this phone ? the Medion p4502 ?
What you do , Root or CWM? I have Op3n Dott but this the same phone like medion p4502.
Dromadore said:
I do the same but the phone is block in a boot loop.
When i start with the button "on" and "volume Up", i have a special screen with "No command" writed.
Then using the buttons under the screen i have a menu seems to a cm recovery.
Is there a rom for this phone ? the Medion p4502 ?
Click to expand...
Click to collapse
-- i finaly passed the capchat so i'll edit this post with the right username --
shanti77 said:
What you do , Root or CWM? I have Op3n Dott but this the same phone like medion p4502.
Click to expand...
Click to collapse
Good morning,
I think i just need a ROM or a Backup.
I installed the systel recivert TWRP with flash tool, it works but missing the OS.
With flash tool:
I used those files: logo.bin, lk.bin, MBR, preloader.bin, secro.img, MT6582_Android_scatter.txt, boot.img, recovery.img, system.img
But i didn't have any files for: ebr1, ebr2, cache, usrdata
A the TWRP seems to work, i think i can simply flash a zip file on the SD-card.
Thank you four your interest !
ps: I was invited to type the captcha and it was very very very very difficult to read (i tried more than 20x).
Firmware ver213 link
shanti77 said:
1. Download and install apk from google play "MTK Engineering Mode"
2. In this apk "MTK Settings->Log and Debugging->User2Root" push "Root" button and exit apk.
3. Switch on "Debugging Mode" in phone:
-open up Settings, then scroll all the way down to About phone. Once there, tap Software information, then tap Build number seven times. You'll see a toast notification alerting you that you are now a developer.
- go back to the main Settings page and you'll see a new entry for Developer options. In this menu check USB debugging
4. Download and install this program iRoot, (download with IE beacuse firefox see dangerous file)
5. Run iRoot and connect phone to PC
6. Choose "Connect" and then "Root"
7. Unistall 2 chineese aplication, and install "Supersu" from google play (after restart update "supersu")
8. You have root.
I use chineese supersu beacuse this from google play have problem with permission to sdcard.
Click to expand...
Click to collapse
Thank you for excellent post! I managed to root my Medion P4502 using your instructions but substituted iRoot with Kingo Root. Here is the link with necessary steps.
shanti77 said:
Firmware ver213
Click to expand...
Click to collapse
*removed link because not passed limit yet*
Hey shanti, I too have been stupid and managed to remove my system. I was trying to navigate TWRP (so much more used to CWM with previous devices) and accidentally erased the system instead of backing it up. Is it possible to flash this with fastboot? I did managed to back up the boot files, just not the system, and I don't have a external SD card (I might be able to swap the one off my mums phone though at some point).
Thanks
Will
PS. If it helps, I use Arch Linux (32 bit) because my laptop chargers broken I'm using my spare PC, and also the phone is the Medion variant (LIFE P4502 from Aldi)
EDIT: Buying SD Card today
Can somebody help me to make cm11 port? Thanks
Were can i find chinese supersu? I instaled from google but really have problemy with SD, lost settings after reboot, and other problems
shanti77 said:
Firmware ver213 link
Click to expand...
Click to collapse
Hello,
Is this Original firmware, and how to do it?
Thanks for helping me.
Still need original ROM for Medion P4502
Can someone tell me where and how to recover my phone?
It doesn't connect to my network provider (I tested 3 differents Sim cards), and he also change his MAC address at WIFI connection.
I need original ROM and how to put it back (how to do).
Please help me as I don't want to send it back to Medion service (3th time), as they didn't do anything.
A friend has the same phone.
Is it possible to make a copy of his ROM (and how) to put it back on mine?
Thanks for helping me.
No answer, so phone send back to Medion repair service.
Hope this time it will return in good conditions ...
Please help!
Dromadore said:
I do the same but the phone is block in a boot loop.
When i start with the button "on" and "volume Up", i have a special screen with "No command" writed.
Then using the buttons under the screen i have a menu seems to a cm recovery.
Is there a rom for this phone ? the Medion p4502 ?
Click to expand...
Click to collapse
Hi Dromadore,
Did you end up to fix you bootloop issue? Can you please share your findings with me as I am desperately looking for a solution?
Cheers,
Related
I've got this new MyPhone A858 Duo, a dual-sim phone with 1Ghz processor from the Philippines.
I've tried rooting it using SuperOneClick 2.3.3.0, UnlockRoot 2.3.1 and Gingerbreak, but it seems that all failed in rooting this new android phone.
Any idea how to root this phone will be greatly appreciated.
TIA
bedodot said:
I've got this new MyPhone A858 Duo, a dual-sim phone with 1Ghz processor from the Philippines.
I've tried rooting it using SuperOneClick 2.3.3.0, UnlockRoot 2.3.1 and Gingerbreak, but it seems that all failed in rooting this new android phone.
Any idea how to root this phone will be greatly appreciated.
TIA
Click to expand...
Click to collapse
I'm bumping this because I'm planning to get the exact the same phone.
Bumping this one as well.
BUMP!
ROOT!!!
Damn, can someone please root or tell how to root this.... Also, I want a new custom ROM..... I WANT IT SO BAAAAD!!!!:highfive::highfive:
Rooting Myphone A858
Bump for this one. Please help us
try using zhuodashi
[SOLVED] rooting a858
1. Install Android USB Driver (PDAnet).
Windows XP/Vista/7 32-bit --- http://pdanet.co/bin/PdaNetA350.exe
Windows Vista/7 64-bit --- http://pdanet.co/bin/PdaNetA350x64.exe
2. Turn off your phone. Then connect your phone via usb data cable.
[ a ] Then an unknown device will appear instantly, it will disappear and then it will reappear. Right click on it and choose to update driver manually. Now locate the folder where your Android MT65xx PreLoader is.
[ b ] Find new software mt65xx preloader. Then choose install the software from a list. Now locate the folder where your Android MT65xx PreLoader is.
NOTE: If nothing happens after plugging then boot to recovery by PRESSING HOLD POWER + VOL UP Button then see your notification area on your desktop then follow either [a] or above.
Done. Now disconnect your phone from the computer. And make it sure that your phone is turned off before proceeding to step 3..
3. Extract downloaded files http://d01.megashares.com/dl/xuN9uOq/SP_Flash_Tool_exe_v2.1140.0.zip to one folder for easy locating of the files. Open SP Flash Tool. Then choose scatter loading. See image below.
http://img833.imageshack.us/img833/6559/78333114.png
4. Look and find the scatter text file http://www.mediafire.com/?y7nd8sd5canxkr5 and open it. See image below.
http://img337.imageshack.us/img337/3639/17602446.png
5. Ignore and tick OK. See image below.
http://img826.imageshack.us/img826/6638/69831501.png
6. Check the box with the name "Recovery". Then look for the downloaded recovery file http://d01.megashares.com/dl/UiC2KlY/recovery.img And open it. See image below.
http://img27.imageshack.us/img27/3097/56761975.png
http://img339.imageshack.us/img339/320/48823847.png
7. Tick Option from the menu and check USB Mode. See image below.
http://img521.imageshack.us/img521/391/48354908.png
8. Tick the Download button. Note: Look at the image carefully before ticking the download button. Make it sure nothing else is checked. See image below
http://img692.imageshack.us/img692/5207/95347966q.png
9. Plug your cellphone via your usb cable. Then wait for it to be finish. See image below.
http://img856.imageshack.us/img856/8315/48740804.png
***NOTE: If your phone isn’t detected after plugging then boot to recovery by PRESSING + HOLD POWER + VOL UP Button THEN go back to step 2.
10. A yellow bar will appear. Wait for it to reach 100%. See image below.
http://img831.imageshack.us/img831/3964/57052207.png
11. Done. Congratulations. You successfully installed a "CUSTOM RECOVERY".
12. Now it's time to root your phone by following the next tutorial below.
MAKE SURE YOU HAVE DONE SUCCESSFULLY THE STEPS ABOVE BEFORE PROCEEDING BELOW
1. Copy and paste root_MP858Duo.zip http://d01.megashares.com/dl/tPWGVHo/root_MP858Duo.zip to the root of your SD Card.
2. Turn Off your phone and open custom recovery by pressing and holding Power Button + Volume Up.
3. Install zip from sdcard.
4. Choose zip from sdcard.
5. Choose root_MP858Duo.zip. Then confirm update.
6. Reboot.
7. Look for an icon with an Android Face named "SuperUser".
8. Done. Congratulations. Your phone is now rooted.
Does Not Work
isfahan27 said:
1. Install Android USB Driver (PDAnet).
2. Turn off your phone. Then connect your phone via usb data cable.
...
Click to expand...
Click to collapse
I've heard this works for other people. With my phone it doesn't. When I plug it in, it doesn't show an unknown device. I've already downloaded and installed MT65xx Preloader and tried out a VCom, but still nothing. I've been going at it for a week, so if anyone's got an answer, advice would be great. Thanks!
Error # 16008
A message came out,
"EBOOT ERROR (16008), [Android] Partition size changed!
[HINT]:
Partial images download error.
The following partitions must be downloaded FULL altogether."
I followed all the steps (and the links) up until I clicked the 'Download' button. :/ When I click download button, that message shows.
I have: My Phone A858, Android 2.3.2 (Gingerbread), Sony Vaio with a Windows 7. Thanks!
Rooting
outerspacekaloy said:
A message came out,
"EBOOT ERROR (16008), [Android] Partition size changed!
[HINT]:
Partial images download error.
The following partitions must be downloaded FULL altogether."
I followed all the steps (and the links) up until I clicked the 'Download' button. :/ When I click download button, that message shows.
I have: My Phone A858, Android 2.3.2 (Gingerbread), Sony Vaio with a Windows 7. Thanks!
Click to expand...
Click to collapse
ok sir.... :good:
one click to root
Hi,
there is a simple way is using one root click.
Try this : http://360dmobile.com/root-1-85-one-click-root-act-now-may-not-last-foreve/
bedodot said:
I've got this new MyPhone A858 Duo, a dual-sim phone with 1Ghz processor from the Philippines.
I've tried rooting it using SuperOneClick 2.3.3.0, UnlockRoot 2.3.1 and Gingerbreak, but it seems that all failed in rooting this new android phone.
Any idea how to root this phone will be greatly appreciated.
TIA
Click to expand...
Click to collapse
You try this video on youtube, because A858 Duo is also Q-Smart S15
http://www.youtube.com/watch?v=BImmgu0-kR0
Download all neccessary things below the video on youtube to root
Good luck!
Hi guy,
First, sorry for my bad english, I'm french.
Secondly, I talk with a small community and we trying to root the OT 5020x on Jelly Bean 4.1.
How to root this phone ?
See you and thanks for all!
Up
1.Dowoad the file from the link below.
2. Then download Clockwork Mod Custom Recovery.
3. Then boot into recovery mode, and choose "install from SD Card".
4. Choose Clockwork mod recovery.zip, and it will boot you into a different recovery.
5. From that recovery mode you should be able to flash .zip files without signature verification.
6. Choose install zip from SD Card and choose SU Installer.zip.
Note:To unroot just flash SU Uninstaller.zip the same way you did to flash Installer.zip.
Downloads:
CWM Custom Recovery (Choose either Touch Recovery or Recovery for your device.):
http://clockworkmod.com/rommanager
SU Installer:
http://www.mediafire.com/?0r9dx4t1utvvuj0
SU Uninstaller:
http://www.mediafire.com/?c469p1nu64e92gf
Be Sure To Click Dat THANKS Button If I Helped!
Sent from my GT-I9100 using xda premium
Bonjour
J'ai suivi ce poste (procedure un peu longue) et tout c'est bien passé pour moi (One touch m'pop de chez free: rooté ).
http://forum.xda-developers.com/showpost.php?p=38337401&postcount=5
Cordialement.
PS: Il faut etre bien rigoureux sur les etapes de cette procedure. Je ne peux etre tenu pour responsable en cas de brickage du telephone.
Ronny927, in the page //clockworkmod. com/rommanager isn't the rom for the alcatel m'pop. Can you upload a .zip file for this phone please?
Lucien, if you understand me.... xd, can you upload your .img file? I can't get the recovery file with the sp flash tool
Sorry for my english, i am spanish
I don't see rom for alcatel here, maybe there is another way for this but i just can't get around it.
Anyways, i spend some time searching, and came up on some french forum, some guy said he rooted his m'pop using this method.
(Since i'm new user i cannot post outside links)
pastebin-com-c6gwDsbk
(replace "-" with "." and "/" )
This was translated with google translate so it might have some mistakes. For people speaking french, here's the full post in french.
pastebin-com-E8KaP0tZ
Can anyone confirm this procedure is working ? I am still not comfortable playing with my phone regarding this, because i'm still noob about these things. If anyone can try this method and share your opinions i'd be grateful.
Yeah! That link was really usefull, the french guy's procedure works perfect!
kiroga123 said:
Yeah! That link was really usefull, the french guy's procedure works perfect!
Click to expand...
Click to collapse
I'm glad it worked out for you. However i did tried this method, but with no success. After step 17 - flash from sd card zip, it says error installing, or something. Tried for 6-7 times but with no success .
I made a rar with all necesary here is inside are the instructions in a .txt, (I should clarify that I have not tried yet), comment if it works.
Replace the %2A... in the url with a d f .l y without spaces and then click ok skip ads Sorry for my bad english
leonardv128 said:
I made a rar with all necesary here is inside are the instructions in a .txt, (I should clarify that I have not tried yet), comment if it works.
Replace the %2A... in the url with a d f .l y without spaces and then click ok skip ads Sorry for my bad english
Click to expand...
Click to collapse
THANK YOU!!!!!!!!
1. With your Files we need just the step #8 from this HowTo
http://forum.xda-developers.com/showpost.php?p=38337401&postcount=5
2. After that we need to install the SU as zip-File (f.e. http://forum.xda-developers.com/showpost.php?p=38337401&postcount=5) in recovery mode (After Volume Up + Power -> install zip)
Done!
echoffs said:
I'm glad it worked out for you. However i did tried this method, but with no success. After step 17 - flash from sd card zip, it says error installing, or something. Tried for 6-7 times but with no success .
Click to expand...
Click to collapse
Code:
[URL="http://www.phonandroid.com/forum/root-rooter-le-alcatel-one-touch-m-pop-t57072.html"][B][SIZE="5"]Here is a procedure[/SIZE][/B][/URL] for the Alcatel one touch rooter m'pop 5020x from home free
File download
[url]http://www.alcatelonetouch.com/uk/support/faq/one_touch_upgrade.html[/url]
One Touch Upgrade S 2.8.0
[url]http://www.alcatelonetouch.com/fr/[/url] [...]-setup.exe
SP FlashTool
[url]http://dl.free.fr/mOx6zdo3z[/url]
Recovery changes
[url]http://dl.free.fr/k1jmZR4Dx[/url]
Stock ROM
[url]http://dl.free.fr/rOq9NslEn[/url]
Scatter file
[url]http://dl.free.fr/npp9eiiVj[/url]
- On the phone to enable USB debugging mode (in "Settings" - "About phone" - "Advanced Settings" - "USB debugging")
- Connect the phone on USB.
- Install the ADB driver with the file loaded "One Touch Upgrade 2.8.0 S" (installed software only if you go to the end of the installation process will put your phone in factory)
- Check that is well recognized in the device manager as "Android Phone" - "Alcatel Android ADB Interface"
- Disconnect the phone and turn it off.
- Launch SP FlashTool
- In unguled "Download" under "Scatter-loading File" select the scatter file you loaded
- In the section below, check ONLY the "RECOVERY" check box (uncheck the other if there has checked and select
the "Recovery .... img" file you loaded by clicking the "RECOVERY" next to the box. (I do not know if I'm clear of??)
- Click on Download (note use the "download" button and especially not "Firmware -> Upgrade")
- A window appears informing you that going the whole picture is not loading correctly. this is normal click "YES" or "OK"
- Connect the phone "extinguished"
- Wait for a new small window with a green ring tells you "Download OK" appears
.
- Normally all these well.
- Disconnect the phone (remove the battery)
- The restart by pressing the start button and still pressing "vol +" until the appearance of
selection menu "recovery" "fastboot" "" normal. "go to recovery with the" Flight + "and pressing" vol-"
- Voila, your phone is Roote, it remains only to install a zip or SU Play store.
I did the whole procedure from the dump of my rom and everything went well.
I give this procedure for information. If your phone does not restart after the operation, I would not be held responsible.
[email protected] said:
Code:
[URL="http://www.phonandroid.com/forum/root-rooter-le-alcatel-one-touch-m-pop-t57072.html"][B][SIZE="5"]Here is a procedure[/SIZE][/B][/URL] for the Alcatel one touch rooter m'pop 5020x from home free
File download
[url]http://www.alcatelonetouch.com/uk/support/faq/one_touch_upgrade.html[/url]
One Touch Upgrade S 2.8.0
[url]http://www.alcatelonetouch.com/fr/[/url] [...]-setup.exe
SP FlashTool
[url]http://dl.free.fr/mOx6zdo3z[/url]
Recovery changes
[url]http://dl.free.fr/k1jmZR4Dx[/url]
Stock ROM
[url]http://dl.free.fr/rOq9NslEn[/url]
Scatter file
[url]http://dl.free.fr/npp9eiiVj[/url]
- On the phone to enable USB debugging mode (in "Settings" - "About phone" - "Advanced Settings" - "USB debugging")
- Connect the phone on USB.
- Install the ADB driver with the file loaded "One Touch Upgrade 2.8.0 S" (installed software only if you go to the end of the installation process will put your phone in factory)
- Check that is well recognized in the device manager as "Android Phone" - "Alcatel Android ADB Interface"
- Disconnect the phone and turn it off.
- Launch SP FlashTool
- In unguled "Download" under "Scatter-loading File" select the scatter file you loaded
- In the section below, check ONLY the "RECOVERY" check box (uncheck the other if there has checked and select
the "Recovery .... img" file you loaded by clicking the "RECOVERY" next to the box. (I do not know if I'm clear of??)
- Click on Download (note use the "download" button and especially not "Firmware -> Upgrade")
- A window appears informing you that going the whole picture is not loading correctly. this is normal click "YES" or "OK"
- Connect the phone "extinguished"
- Wait for a new small window with a green ring tells you "Download OK" appears
.
- Normally all these well.
- Disconnect the phone (remove the battery)
- The restart by pressing the start button and still pressing "vol +" until the appearance of
selection menu "recovery" "fastboot" "" normal. "go to recovery with the" Flight + "and pressing" vol-"
- Voila, your phone is Roote, it remains only to install a zip or SU Play store.
I did the whole procedure from the dump of my rom and everything went well.
I give this procedure for information. If your phone does not restart after the operation, I would not be held responsible.
Click to expand...
Click to collapse
Does anyone if this method works for the Alcatel OT 5020A???
It works for OT-5020A
Plz Help
dm.homelinux.com said:
THANK YOU!!!!!!!!
1. With your Files we need just the step #8 from this HowTo
http://forum.xda-developers.com/showpost.php?p=38337401&postcount=5
2. After that we need to install the SU as zip-File (f.e. http://forum.xda-developers.com/showpost.php?p=38337401&postcount=5) in recovery mode (After Volume Up + Power -> install zip)
Done!
Click to expand...
Click to collapse
PLz sir i am a noob user of alcatel 5020D M'pop i Have done all the steps in the txt files but i dont under stand any thing from the 2 steps u added to the how to
plz help
now i can acces recovery mode but i cant get the SU.zip to install it
Hesham11 said:
PLz sir i am a noob user of alcatel 5020D M'pop i Have done all the steps in the txt files but i dont under stand any thing from the 2 steps u added to the how to
plz help
now i can acces recovery mode but i cant get the SU.zip to install it
Click to expand...
Click to collapse
Follow the procedure at the begining of the thread. Or download the full package with instructions. There's no problem with it. The most important thing is that your PC recognizes your 5020 as it said.
AlexGardunio said:
Follow the procedure at the begining of the thread. Or download the full package with instructions. There's no problem with it. The most important thing is that your PC recognizes your 5020 as it said.
Click to expand...
Click to collapse
I'm really sorry but i didnt get which thread do u mean the one with scatter file (i dont get a word out of it)
Or the thread i quoted
The pc recognized my alcatel after sevral tries but it did recognize it).
Can u copy for me what should i do next
Thanks in advance
Hesham11 said:
I'm really sorry but i didnt get which thread do u mean the one with scatter file (i dont get a word out of it)
Or the thread i quoted
The pc recognized my alcatel after sevral tries but it did recognize it).
Can u copy for me what should i do next
Thanks in advance
Click to expand...
Click to collapse
Hi my friend. I refer to the procedure in this thead. I've failed doing it because my pc didn't recognize my phone exactly as it should. In the exact moment it recognizes my phone everything worked as it should and I got my phone root and all. Any doubt, please let me know.
AlexGardunio said:
Hi my friend. I refer to the procedure in this thead. I've failed doing it because my pc didn't recognize my phone exactly as it should. In the exact moment it recognizes my phone everything worked as it should and I got my phone root and all. Any doubt, please let me know.
Click to expand...
Click to collapse
Ok now i will sound really stupid but i am sorry i really cant proceed.
Look now the device completely recognizes my alcatel 5020D can u copy for me which procedures should i follow next ??
(i managed to open the recovery mood but i dont know what to do next)
sorry for being a troublesome
I just came across this thread. I own the Alcatel One Touch Evolve 5020N on MetroPCS. I haven't activated it. I'm going to give 5 of 'em to my children for use as Wi-Fi only music and game players. I was wondering if you'd can be used for my phones do they will have CWM? I followed directions I found on rooting, so that's out of the way, just need a recovery. Thanks.
Sent from my LG-MS770 using Tapatalk
Hesham11 said:
Ok now i will sound really stupid but i am sorry i really cant proceed.
Look now the device completely recognizes my alcatel 5020D can u copy for me which procedures should i follow next ??
(i managed to open the recovery mood but i dont know what to do next)
sorry for being a troublesome
Click to expand...
Click to collapse
Take it easy my friend, we all suffer this kind of stuff and this Alcatel OT isn't a piece of cake hehe. Download this link and besides the files you'll find a tutorial with the easiest way to root and all your phone. I've been surfing and I think it's the clearest way for you to follow. I've tried it and works perfectly.
https://mega.co.nz/#!R0IEyCKI!YhnPpE6Hfim2Kbrrbk5OITO8npQP3B8Qw5eEtWm7Gyc
Hello
Im the owner of a brand new Xperia z tablet from China where Google is not welcome anymore. I try to install the Google apps ( play store mainly) on my tablet but was not able to succeed. Can anyone help me?
The model is sgp 311
Android version : 4.1.2
Kernel: 3.4.0-g298631f-02047-gec59411
Build model : 10.1.c.0.370
Thanks for your precious help
yi_wei said:
Hello
Im the owner of a brand new Xperia z tablet from China where Google is not welcome anymore. I try to install the Google apps ( play store mainly) on my tablet but was not able to succeed. Can anyone help me?
The model is sgp 311
Android version : 4.1.2
Kernel: 3.4.0-g298631f-02047-gec59411
Build model : 10.1.c.0.370
Thanks for your precious help
Click to expand...
Click to collapse
did u try installing them from Here
im not sure which one, its either the date gapps-jb 12-12-13 or gapps-jb 13-3-3 for the xtz
Hello arcsuser,
Thanks for your help,
I have downloaded the zip file as proposed.
unfortunately I was not able to install it because I don't have the root access on my tablet.
If there is a way to install the zip file without the recovery mode I'd be glad to know it.
if not, I will have to go through the process.
thanks again for your help.
let me know if there is a way without the root mode
:good:
yi_wei said:
Hello arcsuser,
Thanks for your help,
I have downloaded the zip file as proposed.
unfortunately I was not able to install it because I don't have the root access on my tablet.
If there is a way to install the zip file without the recovery mode I'd be glad to know it.
if not, I will have to go through the process.
thanks again for your help.
let me know if there is a way without the root mode
:good:
Click to expand...
Click to collapse
U want to install it without root, i dont think thats possible,
Anyway have you try installing it as a normal apks? If it still doesnt install then i guess you really have to be rooted..
How about, get root, install apps, then unroot.. I dont think the apps are affected. Im not sure just give it a try
Sent from my SGP311 using xda app-developers app
arcsuser said:
U want to install it without root, i dont think thats possible,
Anyway have you try installing it as a normal apks? If it still doesnt install then i guess you really have to be rooted..
How about, get root, install apps, then unroot.. I dont think the apps are affected. Im not sure just give it a try
Sent from my SGP311 using xda app-developers app
Click to expand...
Click to collapse
Actually I have now the same question than "OP" on the recovery mode. I have now rooted the device the "super user app" is available and activated.
but I still can't access the recovery mode. I have tried the key combination mentioned in your post to "OP". then I referred to the post from DooMLoRD "All the info you need before you begin" with the Xperia Z tablet where the recovery mode is described.
I have the sony screen displayed, then I press volume up, the boot is going the normal way.
I tried with the usb cable connected to the PC, then it goes directly to the Xperia logo.
I tried the normal reboot (one light falshing) and the hard reboot (3 lights flashing) I do not have the device vibrating like explained by DooMLoRD.
Is this the reasn ?
thanks for your help again.
yi_wei said:
Actually I have now the same question than "OP" on the recovery mode. I have now rooted the device the "super user app" is available and activated.
but I still can't access the recovery mode. I have tried the key combination mentioned in your post to "OP". then I referred to the post from DooMLoRD "All the info you need before you begin" with the Xperia Z tablet where the recovery mode is described.
I have the sony screen displayed, then I press volume up, the boot is going the normal way.
I tried with the usb cable connected to the PC, then it goes directly to the Xperia logo.
I tried the normal reboot (one light falshing) and the hard reboot (3 lights flashing) I do not have the device vibrating like explained by DooMLoRD.
Is this the reasn ?
thanks for your help again.
Click to expand...
Click to collapse
did you spam the volume up?
our tablet will not vibrate because DooMLoRDs links is actually for phone that ALSO works for XTZ..
You said you're rooted but still cant go to recovery.. HHmmmm..
Do you have the recovery installed? cause if not it will not work
you can install it Here
if you are rooted and the recovery is installed.. then nothing can go wrong
arcsuser said:
did you spam the volume up?
our tablet will not vibrate because DooMLoRDs links is actually for phone that ALSO works for XTZ..
You said you're rooted but still cant go to recovery.. HHmmmm..
Do you have the recovery installed? cause if not it will not work
you can install it Here
if you are rooted and the recovery is installed.. then nothing can go wrong
Click to expand...
Click to collapse
I have downloaded and tried unsucessfully to flash the recovery tool.
I couldn't access the flash mode as described in the basics from DooMLoRD.
“while device is power OFF
Volume Up + USB cable connected to PC -> FASTBOOT MODE (BLUE LED will light up）“
I'm afraod I will need some tutorial to go through the steps of fast boot...
thanks
You don't need recovery to install the apps if you have root. Just unzip the file using root explorer. The unzipped file will show from the structure where the files have to go so just copy them to the corresponding folder on the tab using root explorer. (apps, and their associated odex file if there is one, will usually be in /system/app folder) Don't forget to set the permissions (rw-r--r-- for system apps and odex files), also using root explorer. Reboot and if they're gonna work as system apps they will...
Sent from my GT-P7510 using XDA Premium HD app
yi_wei said:
I have downloaded and tried unsucessfully to flash the recovery tool.
I couldn't access the flash mode as described in the basics from DooMLoRD.
“while device is power OFF
Volume Up + USB cable connected to PC -> FASTBOOT MODE (BLUE LED will light up）“
I'm afraod I will need some tutorial to go through the steps of fast boot...
thanks
Click to expand...
Click to collapse
How to put Xperia Tablet Z into Fastboot Mode.
1. Completely POWER OFF tablet (not Sleep Mode).
2. Connect one end of USB cable to tablet.
3. Press and hold tablet's VOL+ button.
4. Connect other end of USB cable to computer.
5. Wait until tablet's notification light flashes red then solid blue, then release VOL+ button.
6. To exit Fastboot Mode, disconnect the USB cable.
Cat McGowan said:
How to put Xperia Tablet Z into Fastboot Mode.
1. Completely POWER OFF tablet (not Sleep Mode).
2. Connect one end of USB cable to tablet.
3. Press and hold tablet's VOL+ button.
4. Connect other end of USB cable to computer.
5. Wait until tablet's notification light flashes red then solid blue, then release VOL+ button.
6. To exit Fastboot Mode, disconnect the USB cable.
Click to expand...
Click to collapse
Hello,
thanks for the walk through.
I have followed it step by step and here is the result. my computer (PC windows 7) makes a sound like a usb device is connected but not recognized.
when I connect the tablet in the normal way it is recognized without problem.
do you think I need to install some drivers on the PC as well ?
thanks for your help
yi_wei said:
Hello,
thanks for the walk through.
I have followed it step by step and here is the result. my computer (PC windows 7) makes a sound like a usb device is connected but not recognized.
when I connect the tablet in the normal way it is recognized without problem.
do you think I need to install some drivers on the PC as well ?
thanks for your help
Click to expand...
Click to collapse
You need to install Sony Mobile's Fastboot driver.
Cat McGowan said:
You need to install Sony Mobile's Fastboot driver.
Click to expand...
Click to collapse
Hello Cat McGowan,
I have made some progress since your post. I have downloaded and installed fastboot toolbox from DooMLord (V1.0) and could access the fastboot mode
My final goal is to install the gapps on my tablet, I have downloaded the package the android 4.1.x.
to install the gapps, I need to find the recovery mode,
to install the recovery mode I have downloaded the TabZ_DooMLoRD_AdvStkKernel.img.
For the next step I need some help because I can't install the *.img through flashboot toolbox. or anything else for that matter.
thanks again for your good advice.
yi_wei said:
Hello Cat McGowan,
I have made some progress since your post. I have downloaded and installed fastboot toolbox from DooMLord (V1.0) and could access the fastboot mode
Hello, Quick feed back on what I have been doing the last days.
I have finally understood the CWM recovery tool and managed to install from zip file the google apps.
unfortunately something failed in the process and now I can't acces the tablet anymore. "google service has unexpectly stopped"
I can't access the recovery tool anymore.
I may have to flash a new rom completely.
anyone has a suggestion ?
thanks for your help
Click to expand...
Click to collapse
Yes ! I finally did it. using the CWM tool. and loaded the package.
thanks again for all you help
yi_wei said:
Yes ! I finally did it. using the CWM tool. and loaded the package.
thanks again for all you help
Click to expand...
Click to collapse
Hey yi wei! I also got my xtz in China without any google service. Do you mind telling me how you rooted your device? I couldn't find a tool that roots xtz from China. Many thanks!
how to hard reset my sony xperia tablet z .
Hey , im new here .
My xtz is made in china . I forgot the lock tablet password .
So how could i reset the tablet to unlock my tablet ?? Plss help .
Hi all!!
This is for all the people who managed to softbrick (or hardbrick) their Lenovo Tab 3 8' (TB3-850F) tablets!
All you will need link, at the end of the post. I don't know for how long it will be up, but you can use it for now.
By the way.... Should you find something useful here... please hit the thanks button in the end
A. Unbrick
This requires flashing a clean stock rom. You will need:
a. stock rom for the TB3-850F (Google is you friend )
b. Sp Flashtool (you can download from their official site). From there, also download the MediaTek USB VCOM drivers and Driver Auto Installer v1.1236.00 (or any latest version).
Steps:
1. Install the windows drivers you downloaded
Note : If you encounter problems installing Windows drivers in Windows 10, google how to install unsigned drivers in Win10
2. Open the folder you extracted SP Flashtool and run it as administrator.
3. Unzip the rom file you downloaded.
4. Inside the folder of your unzipped rom file, look for a file similar to XXXXXXXXXX_scatter_file.txt
5. Load this in the SP Flashtool (click downlad tab, then scatter loading, load this file in there. It should load your rom you will see some colours, etc...
The tricky part:
Assuming you have correctly installed the drivers:
1. turn off the device (well if bricked it is turned off all ready) just make sure, and in SP Flashtool click options and 'with battery'.
2. Click the green download button on SP Flashtool.
3. Hold down the Vol down key on your device and connect it to a usb port.
4. If you see a red line and continue to yellow, all is probably good! Don't let go of the vol - button until yellow line reaches 100%
B. Root and TWRP recovery
This requires that you have or download:
a. platform tools (adb and fastboot)
b. a twrp.img (image file) for the lenovo TB3-850F copied to external SD Card and platform tools folder (google is... useful )
c. latest supersu.zip (flashable) copied to an external SD CARD
d. busybox.apk
Steps:
1. Grab tablet, go to settings ---> about tablet ---> click version number 7 times to enable developer options
2. From settings again click developer options and enable OEM Unlocking and usb debugging
3. Navigate in the platform tools folder. While holding SHIFT right click and select open commandline here (or similar)
4. Connect tablet to PC and in the command line issue: adb devices
If a weird number shows up and says device on the left you are all good to continue.
5. Now on the command prompt again issue: adb reboot bootloader
Your tablet should now reboot to fastboot (big Android, laying down)
6. Issue command: fastboot oem unlock (also check tablet screen for confirmation)
Wait a little bit and reboot your tablet. (should work with holding the power key down for a little longer than 10 seconds. If not hold down volume key and power button for the same amount of time - tested and working)
**At this point it is ESSENTIAL to leave the tablet to fully boot. The bootloader unlock triggers a FACTORY RESET which you must leave to complete and set up your tablet from the beginning.
** It is also ESSENTIAL to complete the boot and set up cycle because, after the automatic factory reset you will need to RE-ENABLE developer options and usb debugging. Once you are done continue to 7.
7. In the platform tools folder copy the twrp.img (you should have downloaded earlier, check upwards... )
8. Open the command line again and type:
a. adb reboot bootloader
b. fastboot boot twrp.img
** This will load up TWRP recovery only for this boot time.
****BE EXTRA CAUTIUS TO -NOT- ALLOW twrp to make modifications. Essential! Should you do otherwise go back to how to unbrick your tablet.
9. Choose install, and install supersu.zip.
10. Choose reboot to system and allow complete boot cycle! Essential!
11. Your tablet should now be rooted. However to succesfully flash the twrp recovery you need to have Busybox installed. Download as .apk and install it (at the time of writing this I believe Busybox 54 is the latest version).
12. Once installed back to the windows terminal and issue:
a. adb reboot bootloader
b. fastboot boot twrp.img
ONCE AGAIN - DO -NOT- ALLOW twrp to make modifications!!!!!
13. From you external SD Card install twrp.img, select recovery when prompted.
14. Reboot to system and enjoy!!!!
Note : Install an app that makes it easy to boot to recovery. (I personally use root essentials - Trying the combination keys did nothing for me, or just poped up the chinese options menu. That does not mean the recovery has not been installed correctly. Booting to recovery from rootessential menu, boots straight to twrp)
All you will need and credits:
https://drive.google.com/drive/fold...ourcekey=0-SDvJaXtWWk-TY9B53ct8dw&usp=sharing (thanks button, thanks button, thanks button!!! )
Results:
(it is in Greek, but you get the idea )
Hope I have helped! Happy playing with the commands and whole process! :good:
Lastly, if you get stuck at any point, you can either use this thread or PM me for further advice, explanation and/or any kind of assistance.
Note: Special thanks to @MotoJunkie01 for actually taking the time to further help people on this thread, as unfortunately I do not currently have the time to do so myself. It is worth checking out @MotoJunkie01 's threads also. There, you can find very useful and updated information.
r&xp said:
Hi all!!
This is for all the people who managed to softbrick (or hardbrick) their Lenovo Tab 3 8' (TB3-850F) tablets!
If you find it useful, just hit thanks in the end
A. Unbrick
This requires flashing a clean stock rom. You will need:
a. stock rom for the TB3-850F (Google is you friend )
b. Sp Flashtool (you can download from their official site). From there, also download the MediaTek USB VCOM drivers and Driver Auto Installer v1.1236.00
Steps:
1. Install the windows drivers you downloaded
2. Open the folder you extracted SP Flashtool and run it as administrator.
4. Unzip the rom file you downloaded.
4. Inside the folder of your unzipped rom file, look for a file similar to XXXXXXXXXX_scatter_file.txt
5. Load this in the SP Flashtool (click downlad tab, then scatter loading, load this file in there. It should load your rom you will see some colours, etc...
The tricky part:
Assuming you have correctly installed the drivers:
1. turn off the device (well if bricked it is turned off all ready) just make sure, and in SP Flashtool click options and 'with battery'.
2. Click the green download button on SP Flashtool.
3. Hold down the Vol down key on your device and connect it to a usb port.
4. If you see a red line and continue to yellow, all is probably good! Don't let go of the vol - button until yellow line reaches 100%
B. Root and TWRP recovery
This requires that you have or download:
a. platform tools (adb and fastboot)
b. a twrp.img (image file) for the lenovo TB3-850F copied to external SD Card and platform tools folder (google is... useful )
c. latest supersu.zip (flashable) copied to an external SD CARD
d. busybox.apk
Steps:
1. Grab tablet, go to settings ---> about tablet ---> click version number 7 times to enable developer options
2. From settings again click developer options and enable OEM Unlocking and usb debugging
3. Navigate in the platform tools folder. While holding SHIFT right click and select open commandline here (or similar)
4. Connect tablet to PC and in the command line issue: adb devices
If a weird number shows up and says device on the left you are all good to continue.
5. Now on the command prompt again issue: adb reboot bootloader
Your tablet should now reboot to fastboot (big Android, laying down)
6. Issue command: fastboot oem unlock (also check tablet screen for confirmation)
Wait a little bit and reboot your tablet.
**At this point it is ESSENTIAL to leave the tablet to fully boot. The bootloader unlock triggers a FACTORY RESET which you must leave to complete and set up your tablet from the beginning.
** It is also ESSENTIAL to complete the boot and set up cycle because, after the automatic factory reset you will need to RE-ENABLE developer options and usb debugging. Once you are done continue to 7.
7. In the platform tools folder copy the twrp.img (you should have downloaded earlier, check upwards... )
8. Open the command line again and type:
a.adb reboot bootloader
b.fastboot boot twrp.img
** This will load up TWRP recovery only for this boot time.
****BE EXTRA CAUTIUS TO -NOT- ALLOW twrp to make modifications. Essential! Should you do otherwise go back to how to unbrick your tablet.
9. Choose install, and install supersu.zip.
10.Choose reboot to system and allow complete boot cycle! Essential!
11.Your tablet should now be rooted. However to succesfully flash the twrp recovery you need to have Busybox installed. Download as .apk and install it (at the time of writing this I believe Busybox 54 is the latest version.
12.Once installed back to the windows terminal and issue:
a.adb reboot bootloader
b.fastboot boot twrp.img
ONCE AGAIN - DO -NOT- ALLOW twrp to make modifications!!!!!
13. From you external SD Card install twrp.img, select recovery when prompted.
14. Reboot to system and enjoy!!!!
Note 1: Install an app that makes it easy to boot to recovery. (I personally use root essentials - Trying the combination keys did nothing for me, or just poped up the chinese options menu. That does not mean the recovery has not been installed correctly. Booting to recovery from rootessential menu, boots straight to twrp)
Note 2: If you encounter problems installing Windows drivers in Windows 10, google how to install unsigned drivers in Win10
I apologize for not being able to post links, but I believe the required software is not particularly hard to find.
Hope I have helped! Happy playing with the commands and whole process! I will continue to help as much as I can :good:
Click to expand...
Click to collapse
Good guide. This tablet has temperamental steps involved with custom recovery and root. This guide gives a good outline of those steps. Here is a link to my thread for Stock Android 6.0 firmware for this tablet for members who need a stock ROM.
https://forum.xda-developers.com/android/general/rom-lenovo-tab-3-8-tb3-850f-android-6-0-t3593043
---------- Post added at 09:08 PM ---------- Previous post was at 09:06 PM ----------
Sorry, didn't mean to quote the entire OP....
MotoJunkie01 said:
Good guide. This tablet has temperamental steps involved with custom recovery and root. This guide gives a good outline of those steps. Here is a link to my thread for Stock Android 6.0 firmware for this tablet for members who need a stock ROM.
https://forum.xda-developers.com/android/general/rom-lenovo-tab-3-8-tb3-850f-android-6-0-t3593043
---------- Post added at 09:08 PM ---------- Previous post was at 09:06 PM ----------
Sorry, didn't mean to quote the entire OP....
Click to expand...
Click to collapse
Thank you, I appreciate your comment. I was really enthusiastic to read that you are working on a pure Stock Android 6.0 ROM for this device! Will definitely be waiting for that!
Thank you again!
r&xp said:
Thank you, I appreciate your comment. I was really enthusiastic to read that you are working on a pure Stock Android 6.0 ROM for this device! Will definitely be waiting for that!
Thank you again!
Click to expand...
Click to collapse
Thank you for the encouragement. I am in hopes that we can eventually get a dedicated device forum for the tb3-850f. I truly believe this tablet has the potential for plenty of future development.
@r&xp I love you so much, I was in the same predicament as you and you helped get my tablet running again. Just wanted to mention, I had to hold volume down when plugging in the USB for the SPFT step instead of volume up. THANK YOU AGAAAAAAAAAAIN <3
Rimmir said:
@r&xp I love you so much, I was in the same predicament as you and you helped get my tablet running again. Just wanted to mention, I had to hold volume down when plugging in the USB for the SPFT step instead of volume up. THANK YOU AGAAAAAAAAAAIN <3
Click to expand...
Click to collapse
Thanks for the comment!!! :silly:
Glad it worked for you. Isn' t it like a really good feeling when you actually see your bricked device boot correctly for the first time after you had almost deemed it unusable???
(also... a... small request... could you please click on that thingy... you know... that ehhh... thanks button??? :angel::angel:)
Just an update, since damaging my TB3-850F, I have since ordered another unit from Office Depot which is due to be delivered Monday or Tuesday. Once it arrives, I'll finish my TWRP flashable stock 6.0 ROM for this device and start back on the modified stock ROM.
r&xp said:
Thanks for the comment!!! :silly:
Glad it worked for you. Isn' t it like a really good feeling when you actually see your bricked device boot correctly for the first time after you had almost deemed it unusable???
(also... a... small request... could you please click on that thingy... you know... that ehhh... thanks button??? :angel::angel:)
Click to expand...
Click to collapse
Lol yessir, thanked!
MotoJunkie01 said:
Just an update, since damaging my TB3-850F, I have since ordered another unit from Office Depot which is due to be delivered Monday or Tuesday. Once it arrives, I'll finish my TWRP flashable stock 6.0 ROM for this device and start back on the modified stock ROM.
Click to expand...
Click to collapse
Looking forward to it. I picked mine up from walmart just yesterday for using as a google maps/car media center
My Lenovo Tab 3 replacement finally arrived in the mail. I'll be picking up where I left off on compiling both unmodified stock and custom stock-based ROMs for this tablet.
On my modified stock based ROM, I'm considering the implementation of Substratum (Root Ver) for theming, but I would like to get the input of other device owners first. So far, I have debloated, deodexed and zipaligned the OS. I am including the modified/patched boot image with SuperSU v2.79 SR3 binaries installed for systemless root, Nova Launcher, Pixel Icon Pack, BusyBox v1.26.2 binaries pre-injected in /su/xbin/, and Kernel Adiutor-Mod installed in /system/apps/ for user defined adjustments to the stock kernel and governors.
You guys please give me input on what you would like included in the ROM. Thanks
r&xp said:
Hi all!!
This is for all the people who managed to softbrick (or hardbrick) their Lenovo Tab 3 8' (TB3-850F) tablets!
Click to expand...
Click to collapse
I had a Lenovo Tab3 that bricked during the initial set up and this saved me for having an expensive paperweight! The process worked like a charm. You ROCK!
chienfou said:
I had a Lenovo Tab3 that bricked during the initial set up and this saved me for having an expensive paperweight! The process worked like a charm. You ROCK!
Click to expand...
Click to collapse
Really glad it worked for you!!!
Thumbs up! :good::good:
load the scatter file .txt in SP Flashrom is OK ... it show me purple color until finish loading the file.
but how come when I hit the green button Download, it seems like nothing downloading,
thanks God, and thank you so muchhh muchhh muchhh for saving my tablet... after 2 days struggling with this brick
thank you the topic thread and MotoJunkie01 led me here :crying::fingers-crossed:
yiukiang said:
thanks God, and thank you so muchhh muchhh muchhh for saving my tablet... after 2 days struggling with this brick
thank you the topic thread and MotoJunkie01 led me here :crying::fingers-crossed:
Click to expand...
Click to collapse
Try again to get TWRP installed to your /recovery partition or, alternatively, try to simply boot into TWRP from fastboot with the fastboot boot twrp.img command. It is common for members to experience some difficulty in installing custom recovery on this device. It has been my experience that most members are successful the second time around.
Thanks MotorJunkie!! But mine after was saved from brick from this thread, i was rooted it also by your instructions from other thread.. Now the gps from GoogleMap doesn't determine the location (even the location already turned on ) ... Plus i couldn't check the systemupdate ( it says connection network failed even i was connecting to wifi already) ...
What should i do, or do you know how to fix it?
yiukiang said:
Thanks MotorJunkie!! But mine after was saved from brick from this thread, i was rooted it also by your instructions from other thread.. Now the gps from GoogleMap doesn't determine the location (even the location already turned on ) ... Plus i couldn't check the systemupdate ( it says connection network failed even i was connecting to wifi already) ...
What should i do, or do you know how to fix it?
Click to expand...
Click to collapse
System updates (OTAs) won't install on rooted operating systems. To install an OTA, you must have unmodified stock /boot, /system, and /recovery partitions installed. On the GPS issue, go to Settings, Apps, and ensure Google Maps has been granted location access permission.
Hi ...
I followed this guide but during the unbricking' I unplugged the device from USB (since I could not see any input on device or indication in SP Flash Tool).
Now the device will not turn on at all (previously I would see the Lenovo Logo splash screen but then it would just stay at this screen. Now i do not see anything).
When I plug into computer by USB, it causes my computer to freeze up (Windows 10).
Any ideas or is this now completely bricked? (hard bricked).
xavier234 said:
Hi ...
I followed this guide but during the unbricking' I unplugged the device from USB (since I could not see any input on device or indication in SP Flash Tool).
Now the device will not turn on at all (previously I would see the Lenovo Logo splash screen but then it would just stay at this screen. Now i do not see anything).
When I plug into computer by USB, it causes my computer to freeze up (Windows 10).
Any ideas or is this now completely bricked? (hard bricked).
Click to expand...
Click to collapse
It sounds like a hard brick. I can't speak for the OP, @r&xp on this, so you may want to get his advice. Have you tried the OP's methods of using your hardware buttons for forcing the device into adb/fastboot recognition? I think this is your only chance of recovering it. By it not powering on, from my experience, a bootloader or bootloader dependent partition has been corrupted, thus hard bricking the tablet.
MotoJunkie01 said:
It sounds like a hard brick. I can't speak for the OP, @r&xp on this, so you may want to get his advice. Have you tried the OP's methods of using your hardware buttons for forcing the device into adb/fastboot recognition? I think this is your only chance of recovering it. By it not powering on, from my experience, a bootloader or bootloader dependent partition has been corrupted, thus hard bricking the tablet.
Click to expand...
Click to collapse
Hello, I'll weigh in on this one. There are multiple threads above the TB3-850F on this forum and also another forum.
I initially followed a different thread and instructions which caused my problem. Notably do not allow TWRP write access !!! This mistake caused the soft-brick.
Anyone following any other advice about TB3-850F or downloading any other image BEWARe. Only follow the advice in this thread by r&xp:
https://forum.xda-developers.com/android/help/lenovo-tab-3-8-tb3-850f-unbrick-root-t3598727
Following this advice I now restored original image and then rooted in just a few hours.. Thank you r&xp for the good advice. :laugh:
Hey, I'm french so if I do mistake, it's normal, sorry
Here is a way to root this Wiko, finally!
Before doing this, i want to say that me, XDA or nobody exept you is responsible of what you can do on your phone, this method work for me, surely for you, but this operation will delete all your data, so remember to backup your data.
Now, you Have to go to Developper options, enable "OEM Unlocking", "USB Debugging" and disable "Verify apps over USB"
After, set "Select USB Configuration" to MTP. After That, download file (https://mega.nz/#!ioBQDZra!z6ntj85aM-mjg4dnscPaPBjvd-qpSY9HQiDkKuYbxcU) and extract it
Connect your phone to your Computer, Copy and Paste the SuperSU zip file in your SD card, and reboot your phone in fastboot mode (shutdown, and boot it by pressing Power and Vol+, then, when you have a choice between recovery and fastboot, select fastboot by clicking Vol-)
Open a command prompt in the extracted file, and type: fastboot oem unlock
Here, all your data will be lost by a factory reset.
When the phone restart, in the command prompt, type:
adb root
adb shell
cat /proc/partitions
ls -l /dev/block/platform/soc/7825900.sdhci/by-name/ (7825900.sdhci may be different, so use tab to find the correct file)
in the list, you will have a file with "recovery -> /dev/block/XXX" (XXX may be like mmcblk0p22)
cat /dev/block/XXX > /data/local/tmp/recovery.img
exit
adb pull /data/local/tmp/recovery.img
adb reboot-bootloader
fastboot flash recovery "CUSTOM recovery.img"
fastboot reboot
if there is no problems, you phone restart normally, so stop it, and boot to the recovery (Power and Vol+ and whene the choice appear, Select recovery with Vol+)
if your phone don't want to boot to the TWRP recovery, try to flash the stock recovery, reboot and flash again the custom one. if the problem persist, leave a comment.
In TWRP, swipe the button, and go to Install, Up a level, select external_sd and then, select the SuperSU file, select "Reboot after installation is complete, and swipe to flash.
When it's done, install or not the TWRP app, and reboot. The device can start twice before finally boot, and can be longer than usual, but don't do anything, it's normal.
When the phone finally boot, SuperSU may be installed, so go check if it's true, and if it is, go to the play store and install BusyBox (by Stephen (Stericson))
After the installation is complete, open it, and click install.
If there is no problem, the root acces will be request, so accept it and all is done.
If you have a problem, or any question, ask me.
Anyone a idea how to root a Wiko View 3 Lite?
give me the link, pls
greenverdy said:
give me the link, pls
Click to expand...
Click to collapse
Ok
Root Wiko View
Hi,
Can you send the link for rooting Wiko view.
Thanks in advance.
give me the link Please.
can you send me the link as well?
Please if someone has the package already, kindly posted it on the forum.
zerking said:
can you send me the link as well?
Please if someone has the package already, kindly posted it on the forum.
Click to expand...
Click to collapse
Ok, no problem
thank you for the link. I got both TWRP and SU installed but the device is not rooted? How can it be?
zerking said:
thank you for the link. I got both TWRP and SU installed but the device is not rooted? How can it be?
Click to expand...
Click to collapse
Do you have an error message ? Or something else ?
Oh, well, it figured my way out! First SU installation, the phone isn't rooted (I don't know why, either). But I factory reset the phone, set the phone up, then go to TWRP and re-install SU and it worked. Now the phone is rooted!
Thank you very much for your guide and files.
By the way, I guess most people will get stuck at "adb root" command.
Simply dial *#*#84666364#*#* (this launches TinnoEngineerMode)
- go to "Tinno Debug Feature"
- tap on "persist.tinno.debug" and choose 1
Then you can go on with "adb root" command
Hope this helps!
zerking said:
Oh, well, it figured my way out! First SU installation, the phone isn't rooted (I don't know why, either). But I factory reset the phone, set the phone up, then go to TWRP and re-install SU and it worked. Now the phone is rooted!
Thank you very much for your guide and files.
By the way, I guess most people will get stuck at "adb root" command.
Simply dial *#*#84666364#*#* (this launches TinnoEngineerMode)
- go to "Tinno Debug Feature"
- tap on "persist.tinno.debug" and choose 1
Then you can go on with "adb root" command
Hope this helps!
Click to expand...
Click to collapse
It's a good think to say it, because it don't work without dialing this number. Thanks
zerking said:
Oh, well, it figured my way out! First SU installation, the phone isn't rooted (I don't know why, either). But I factory reset the phone, set the phone up, then go to TWRP and re-install SU and it worked. Now the phone is rooted!
Thank you very much for your guide and files.
By the way, I guess most people will get stuck at "adb root" command.
Simply dial *#*#84666364#*#* (this launches TinnoEngineerMode)
- go to "Tinno Debug Feature"
- tap on "persist.tinno.debug" and choose 1
Then you can go on with "adb root" command
Hope this helps!
Click to expand...
Click to collapse
On latest wiko view update, tinoo debug feature was gone, we can't use adb root again after update
guys where i can download official rom for the wiko view 2 and extract?
ola and in french plz ?
don´t work on my wiko view 32GB
please help me to root my wiko view 32gb+3gb. i place fastboot oem unlock in pront comand i see waiting for device, and nothing. please creat a apk our anything for root
Would it work on k-Kool ?
We'll this sounds horrifying, just to get root permission, you have to accept to get rid of all your data and parms ? It must be another way.
I'll explain my real need for rooting my Wiko k-Kool. I bought a 64GB SD card, to be used normally as external storage, not for apps install. However I want to be able to backup my phone onto that card, just in case. I use Helium to backup my data without needing root (uses internally adb) ! However non-rooted Helium as a 3d party application has no permission to write to the SD card ! The reason I want to root is just to give Helium the permission to wirte into a backup directory.
Therefore I dont want to put my data at risk just to get root permission, but found no other way to change heliums permissions.
Thanks for any help.
This can work for the Wiko view 2 ? I can't find anything for my phone [emoji24]
Envoyé de mon W_C800 en utilisant Tapatalk
Can this work for view 2?
This work forse Wiko view max?
nothing for wiko view go?
Hello
Is there anyone who did root the wiko view go hier please?