Hey there
Can anyone offer me a step by step guide to flashing a good custom rom (CM or any android over 4.2.2) on my EXTAB 704DC ?
It has the following:
Processor: Dual Core ARM Cortex A9, 1 GHz, Rockchip 3026
GPU: Dual Core Mali 400MP2, suporta OPNEGL ES1.1/2.0
Android: 4.2.2
Kernel: 3.0.36+ [email protected] #79
I will post any other details necessary when asked for them (since I don't really know what other details I should post xD )
Anyone? Anything? Any extra details you might need so I can fix this?
Related
Hello, my friends I'm from Russia. I need to help!!! I'm have a tablet with stock kernel 3.4.0+
I need a modify kernel with SWAP. Who can do it? I don't have a source code
CPU: Qualcomm Snapdragon (S4 Play) MSM8225, ARM Cortex-A5 (ARMv7-A), Dual Core(1 GHz).
RAM: 512 MB
Android: 4.1.2 JB
GPU: Adreno 203
My config.gz View attachment config.gz
I´m new in this!! I need help!
I have a cell phone with this information:
STE NOVATHOR U8500 , 1 GHz
CPU ARCHITECTURE: ARM cORTEX A7
CORES: 2
CLOCK SPEED 598 - 100 GHz
SYSTEM:
MODEL: GT -I8190 (serrano 3g)
BOARD: e112
DISPLAY: ALPS .JB3.MPV1
HARDWARE: MT6572
ANDROID: 4.2.2
KERNEL: ARMV7 , 3.0.31-809600
[email protected]#2
SMPpreempt web jan 9 16:20:48
KST 2013
I WANT INSTALLED A ROOM FOR THIS CELL , someone THAT HAVE a room ..
PLEASE Share..!! I need Help! :L
Hello All,
I am looking at building my own rom for my tablet after playing with it for a while it seems sluggish even with the quadcore CPU, would anyone be able to point me in the right direction?
I would like to know where to start I am willing to learn the rest on my own.
Here are the specs of the device:
Processor:
Processor Chipset: Rockchip RK3126
Processor: Quadcore Cortex A7 1.3 GHz
Instruction Sets: armeabi-v7a, armeabi
GPU:
GPU: ARM Mali-400MP
OpenGL Version: OpenGL ES 2.0
Audio Chip:
Audio Chipset: Rk30sdk
RAM:
RAM: 512 MB
The sensor information on the device states Android Open Source Project or AOSP on each one which suggests that a custom rom is all ready on the device, would someone be able to point me in the correct direction for the firmware binaries so that I could build a generic rom for the device?
Here is more information on the device itself from the manufacturer http://www.time2direct.com/android-...944b-9-quadcore-android-kitkat-tablet-pc.html
I've emailed them but I haven't had a response from them.
I have found these two links which I believe to be correct for the device
http://malideveloper.arm.com/resources/drivers/open-source-mali-gpus-linux-kernel-device-drivers/
http://www.arm.com/products/processors/cortex-a/cortex-a7.php
Hello XDA Assist,
Please provide the correct forum link or update the thread so that it can reach to correct audience. I have search some thread before starting but can not find anything related for my device.
I am using a Android HDMI Mini PC stick from last few years and now want to install a custom ROM on it but not sure where to start. I have read couple of forums but the information are so vast that i am not able to grab, what i understand that first basic thing to do is to identify your hardware correctly to find compatible custom ROM and that i did using CPU-Z App then i tried to find compatible ROM but i don't know how to relate the chipset information to find custom ROM and what all are the things i need to check before proceed, So can anyone guide me in below please ?
1. Were i can find the custom ROM like CyanogenMod or similar which can be installed on my Android stick?
2. If i found one then what will be the steps to install it?
3. How take a backup of my firmware/OS so that if anything go wrong then i can restore?
My stick is rooted.
----------------CPU-Z App Summry-----------------------
Brand- leoxsys
Device Manufacturer- Unknown
Model ID- Xoro T1S
Android Version- 4.0.4
Kernel Version- 3.0.8
SoC (Processor) Architecture- ARM (armv7l)
SoC Model- Allwinner A13
SoC Family- 1x ARM Cortex-A8 @960 MHz
Frequency- 1008 MHz*/ Min: 30 MHz - Max: 960 MHz
Main CPU- Cores 1 Cores / 1 Threads
Process- 45 nm
CPUID 41.3.7.C08.2
Revision- R3P2
Features- SWP HALF THUMB FASTMULT VFP EDSP NEON VFPV3
Bogomip-s 1001.88 MIPS
SoC Manufacturer- ARM
SoC Model- Mali-400 MP
OpenGL- Ver. 2.0
RAM- 844 MB (1 GB)
Flash- 503 MB
Thanks
sDas
any assistance will be appreciated
sdas_online said:
Hello XDA Assist,
Please provide the correct forum link or update the thread so that it can reach to correct audience. I have search some thread before starting but can not find anything related for my device.
I am using a Android HDMI Mini PC stick from last few years and now want to install a custom ROM on it but not sure where to start. I have read couple of forums but the information are so vast that i am not able to grab, what i understand that first basic thing to do is to identify your hardware correctly to find compatible custom ROM and that i did using CPU-Z App then i tried to find compatible ROM but i don't know how to relate the chipset information to find custom ROM and what all are the things i need to check before proceed, So can anyone guide me in below please ?
1. Were i can find the custom ROM like CyanogenMod or similar which can be installed on my Android stick?
2. If i found one then what will be the steps to install it?
3. How take a backup of my firmware/OS so that if anything go wrong then i can restore?
My stick is rooted.
----------------CPU-Z App Summry-----------------------
Brand- leoxsys
Device Manufacturer- Unknown
Model ID- Xoro T1S
Android Version- 4.0.4
Kernel Version- 3.0.8
SoC (Processor) Architecture- ARM (armv7l)
SoC Model- Allwinner A13
SoC Family- 1x ARM Cortex-A8 @960 MHz
Frequency- 1008 MHz*/ Min: 30 MHz - Max: 960 MHz
Main CPU- Cores 1 Cores / 1 Threads
Process- 45 nm
CPUID 41.3.7.C08.2
Revision- R3P2
Features- SWP HALF THUMB FASTMULT VFP EDSP NEON VFPV3
Bogomip-s 1001.88 MIPS
SoC Manufacturer- ARM
SoC Model- Mali-400 MP
OpenGL- Ver. 2.0
RAM- 844 MB (1 GB)
Flash- 503 MB
Thanks
sDas
Click to expand...
Click to collapse
any assistance will be appreciated
Hi everyone,
I have an old tablet/phone that I would like to try to reuse.
Tablet 7" Model:SmartPad7503G
Brand: Mediacom
ARM Cortex-A9 1 core Rev.r2p10
Board: yecon75_tb_ics "alps"
Display: Mediacom M-MP7503G Ver 4.10 (1024x552, 160 dpi)
GPU: Immagination technologies PowerVR SGX531
Hardware: mt6575
Android 4.0.4
Kernel Architeture: arm7l
Kernel Version 3.0.13 (eng.hcl.1355360860)
I would like to try to install suitable TWRP and also the possibly to install a custom rom.
The firmware update I downloaded is available on the Mediacom website.
I would be very pleased if someone can give me some indication on how to operate.
Thanks in advance.