Hey Guys,
So I just bought a brand new ZTE V5 Max and upon receiving found out that it didn't have GAPPS installed which I heaily use those apps so I went down the route of figuring out what was needed to install GAPPS. Please keep in mind I'm writing this to help fellow users of this phone so they don't have to go through the teadious research and chinese translations, I will not be held accountable for anything that goes wrong with your device when doing the below process, I just know it worked perfectly fine for me:
Step 1: Enable Debugging Mode
Head to Settings > About Phone > tap Build Number 8 times or something > Now go Back to settings and tap More > Developer Options > Enable USB Debugging.
Step 2: Install Drivers
Plug in your phone and install the AutoRun.exe that appears in the virtual CD drive (shows up when youplug the phone in)
Once you have installed the drivers verify in Device manager that all devices relating to the phone are installed and there's no unknow devices.
Step 3: Root the Phone and install CWM (Chinese Version sorry but the bits that are needed have english written )
Download the Rooting and Custom Recovery tool here -- drive.google.com/file/d/0B8qJPucQA8GkQy1uTk93dUNuMkE/view?usp=sharing
Unzip and double click on the ZTE-V5-MAX-TOOL.exe
It should come up and ask for a password enter the following (no spaces in the password had too due to XDA posting rules) - www . ydss . cn
Now select Option 2 which is the Root option
Now the tool will detect the phone and press any key and it'll reboot (my computer installed more drivers at this point and I had to close the rooting tool window, reboot the phone and start again, once again selecting option 2)
Now it should proceed through the rooting process.
At the end it'll try and install a chinese verison of the Root Checker tool mine failed which is ok.
It then display Sucess.
Now at this point I rebooted the phone and installed a Root Checker to validate that I did have Root acess and I did, you can proberly skip this step.
I then fired up the Rooting tool again but this time selected option 3 which will install the Custom Recover CWM
Once again press any key and it will begin installing the custom recovery
Once complete you should see sucess.
Reboot the Phone and go to Settings > About Phone > System Updates > Recovery and it should boot to Recovery CWM if it does yay.
Step 4: Installing Gapps
Reboot the phone
Install ES File Explore and give it Superuser Access
Now go to the uper directoy and tap and hold on the System folder then view the details.
You'll need around 150mb free space in there to be able to install GAPPS, I had to install an app called "Uninstall" (red coloured trash can). I then uninstalled the following : Easy Mode, Handbook (as it's chinese), neoshare, nubia Niudun, Nubia PlatLogo, Nubia Poster and Video Sample.
I then had enough room.
Now download Micro Gapps (Go to drive.google.com/folderview?id=0B1T7tp6tJ_3kQkZSWjNsazJZbGc&usp=sharing
Then click on "1.10 update_gapps" then "pa_gapps-modular-m" and download it. Then put it in the root directory of you Phone Storage.
Now reboot into recovery (Settings > About Phone > System Updates > Recovery)
Go to the second Option in Recovery called "***** Zip**) and browse to the phones storae and install the Zip.
If sucessfull go back to the main menu of Recovery and go down to the (****Cache**) option and select, then select it again to confirm.
Once complete go back to the Main menu again and choose the top option to reboot.
Walla your done.
Website I for info: shuajizhijia.com/jiaocheng/9170.html&prev=search then use translate in Google.
Have fun guys.
Have fun guys, and keep in mind I probaly wont reply if you ask for help as I have a day job
Now select Option 2 which is the Root option
Now the tool will detect the phone and press any key and it'll reboot (my computer installed more drivers at this point and I had to close the rooting tool window, reboot the phone and start again, once again selecting option 2)
Now it should proceed through the rooting process.
At the end it'll try and install a chinese verison of the Root Checker tool mine failed which is ok.
It then display Sucess.
Now at this point I rebooted the phone and installed a Root Checker to validate that I did have Root acess and I did, you can proberly skip this step.
I then fired up the Rooting tool again but this time selected option 2 which will install the Custom Recover CWM
Click to expand...
Click to collapse
Hi m8, I'm still waiting for my phone, seems it will take a wile, as I don't have confirmation yet of shipping.
Now, I was reading what you posted above and I have to thank you for the mini tut, but I marked in red two lines that I'm quite confuse... Can you confirm that please?
Hey Mate,
I've fixed that up now good pickup
Cheers Eric
i got my phone with root without cwm
and found that playstore didnt worked, it has 4.4.4 version
any suggest?
Simply Skip these steps:
Now select Option 2 which is the Root option
Now the tool will detect the phone and press any key and it'll reboot (my computer installed more drivers at this point and I had to close the rooting tool window, reboot the phone and start again, once again selecting option 2)
Now it should proceed through the rooting process.
At the end it'll try and install a chinese verison of the Root Checker tool mine failed which is ok.
It then display Sucess.
Now at this point I rebooted the phone and installed a Root Checker to validate that I did have Root acess and I did, you can proberly skip this step.
very very useful
Dear Frenchie
I would like to express my sincere thanks for your magnificent manual
It has been very very extremely truly helpful for me
I can't express how much I feel grateful for you, this solved a problem that ruined my life
The manual is very accurate and detailed
Thanks very much
unable to add google account
Hi, I have just received my new ZTE Max 5 and I've spent all evening trying to set up my google account. The phone has google play store installed but I cannot install any apps because I cannot establish my google account. Every time I try to set up the account it says "there was a problem communicating with google servers". Any ideas? (I have disabled 2 google 2 step verification).
Can't turn on my phone
Hi, so I was trying to root my ZTE V5 Pro and when i reached the step where it was suposed to root itself, it reeboted and the computer stopped recognizing it. I tried rebooting it several times and restoring its fabric data but it doesnt pass the first screen. It can't open /dev/tty0 because there is no such file or directory. Can anyone please help me?
patseho said:
Hi, so I was trying to root my ZTE V5 Pro and when i reached the step where it was suposed to root itself, it reeboted and the computer stopped recognizing it. I tried rebooting it several times and restoring its fabric data but it doesnt pass the first screen. It can't open /dev/tty0 because there is no such file or directory. Can anyone please help me?
Click to expand...
Click to collapse
You said you have the "ZTE V5 Pro". Maybe that is just a typo, but this thread is about the "ZTE V5 Max", so be careful about what you do.
You can try looking at this post and see if it is helpful to you: http://forum.xda-developers.com/and...alcom-2-gb-t2965623/post63005167#post63005167
But you must make your own assessment and take responsibility for the outcome if it is not the right thing to do for your phone.
I just want the GAPPS zip File.
Related
Hi there. I have this Android Phone from china called Dapeng i9800. Its a 6inch MTK 6575 using ICS 4.03. I wonder where can I find the original rom for this and if there is any tweaks for this phone. Sometimes sluggish when using it as it only has 512 ram.
Thanks in advance
i also have the same model! have you rooted this phone? i can't seem to find instructions on how to go about doing this. can you please point me the right way?
thanks
zaraki kenpachi said:
i also have the same model! have you rooted this phone? i can't seem to find instructions on how to go about doing this. can you please point me the right way?
thanks
Click to expand...
Click to collapse
I got the root from here
xxx.slatedroid.com/topic/33144-haipad-i9220-mtk6575-android-40/
1.Please download root file on
xxx.t-kstore.com/4.0root.rar
2.Go to*setting-developer options-click USB debugging
3.Connect the phone with computer,turn on usb device.
4.Click the file you download from the link TPSparkyRoot.bat*
5.Your phone will restart first time,after the phone start finish(until you see the unlock),click enter in the window of TPSparkyRoot.bat.
6.The phone will restart second time,still the same as first time we did.Then start third time,same as we did in last two*times.Click enter,then phone was rooted.
7.You will see two more app was installed in your phone,that mean root phone successfully.
thanks! that was very helpful information! i had some trouble getting windows to connect to my device. kept getting the error: device not found. i suppose it is because i didn't have the proper drivers for the device.
but it is surprisingly easier when done in linux. i just needed to mess around a little with the udev rules.
for the benefit of newbies like me, the instructions provided from that link provided by worldbreaker, i didn't completely follow them. you can choose to install your own superuser and root explorer apk here. in my case, i already installed the Superuser app from the play store even before the rooting process. i also installed Root Explorer separately from the rooting process as well. so no chinese apps for me
now what?
worldbreaker said:
I got the root from here
xxx.slatedroid.com/topic/33144-haipad-i9220-mtk6575-android-40/
1.Please download root file on
xxx.t-kstore.com/4.0root.rar
2.Go to*setting-developer options-click USB debugging
3.Connect the phone with computer,turn on usb device.
4.Click the file you download from the link TPSparkyRoot.bat*
5.Your phone will restart first time,after the phone start finish(until you see the unlock),click enter in the window of TPSparkyRoot.bat.
6.The phone will restart second time,still the same as first time we did.Then start third time,same as we did in last two*times.Click enter,then phone was rooted.
7.You will see two more app was installed in your phone,that mean root phone successfully.
Click to expand...
Click to collapse
anyone know how i can flash clockworkmod recovery on this phone? i can't seem to find any information about this.
Please give me a fresh link to this suggested link
worldbreaker said:
I got the root from here
xxx.slatedroid.com/topic/33144-haipad-i9220-mtk6575-android-40/
1.Please download root file on
xxx.t-kstore.com/4.0root.rar
2.Go to*setting-developer options-click USB debugging
3.Connect the phone with computer,turn on usb device.
4.Click the file you download from the link TPSparkyRoot.bat*
5.Your phone will restart first time,after the phone start finish(until you see the unlock),click enter in the window of TPSparkyRoot.bat.
6.The phone will restart second time,still the same as first time we did.Then start third time,same as we did in last two*times.Click enter,then phone was rooted.
7.You will see two more app was installed in your phone,that mean root phone successfully.
Click to expand...
Click to collapse
Hi everyone,
I'm trying to root my phone and this file xxx.t-kstore.com/4.0root.rar is no longer available. I hope that someone can plase give me a copy of it or at least let me know where to find it.
Thank you.
Dapeng i9800 firmware found but links dead! Nead russian help!
Hi, I'm from West-Germany and got into trubble:
First of all, I used A Dapeng I9800 for more than 2 years without any problems!
Then, I got my Winter-Blues and cleaned cache from recovery mode!
After that the device didn't boot, because it wanted a passwort to use the cache, which wasn't set. No prob so far!
The solution I found was, that I have to set back to factory default.
But I took off the battery while it was formatting.
Yes, shame on me, I wasn't patient(!) thats my fault!
Now, I've got two new problems:
Is the EMMC bricked?
My russian isn't good enough to enter this forum: china-iphone.ru
to ask these two guys:
BBV1962 http://forum.china-iphone.ru/member12688.html
and:
designed http://forum.china-iphone.ru/member201062.html
via PM, for a working link they posted for my device in their posts on this sides:
http://forum.china-iphone.ru/n9880-6-0-480x854-1-2ghz-android-4-0-3-2x3000-mah-t21999-120.html
http://forum.china-iphone.ru/n9880-6-0-480x854-1-2ghz-android-4-0-3-2x3000-mah-t21999-140.html.
The MTK6575-77 6" original firmware ROM below the posted picture is what I mean.
I hope, someone can get a link for me AND it is not worthless, because the EMMC is broken, as my own backup dosn't work.
Maybee you can get the info hww to flash back exactly, because I get an 4010 format error with the spflash tool.
Thanks a lot
Please help to root this phone!!!!!!!!
Мукеуз said:
Please help to root this phone!!!!!!!!
Click to expand...
Click to collapse
need to up this thread mmm... anybody know to to root this alcatel 985n
ROOTING Alcatel 985 SUCCESS Step by step tutorial
MARLBORO_R3D said:
need to up this thread mmm... anybody know to to root this alcatel 985n
Click to expand...
Click to collapse
Ok.. Hi everybody..
I'm a bit new at this so bare with me....
To root the 985 you basically need this:
- Installed Drivers VERY IMPORTANT!
- Installed ADB shell (To open ADB command prompt go into the install folder of adb -> sdk -> platform tools -> hold SHIFT and right click -> select open command prompt window here) - this was the command line for me - for you it might be different!
- Create ROM backup following these instructions:
- Open ADB command prompt (described above) and enter adb shell cat /proc/mtd
- If all goes well copy the results into notepad and save the file as firmware.info
- After that open MTK 65xx ROM Studio
- Go File -> Load Firmware.info -> select the file you generated earlier
- Notice that the window is now filled with data from your file -> click Create ROM
- Now save that file somewhere easily accessible it's your SCATTER file needed a bit later.
- Open SP Flash Tool (Make sure MT 65x3 USB VCOM drivers are installed )
- Go Options -> USB Mode
- Then press SCATTER-LOADING to the right and select your SCATTER file generated earlier (ignore messages)
- Go into the read-back tab
- Select every checkbox (to make FULL Backup,) or just what you need (Bootimg.img) select where to save Backup!
- When the windows appear make sure that READ PAGE ONLY is selected!
- Press READ BACK (by this point your phone hasn't been connected at all to the PC)
- Now turn off your phone, pull out the battery,hold VOLUME UP, plug the phone in and THEN quickly put the battery back in!!!
- If all goes well you should see one red bar and one or several blue ones (depending on what you selected to backup)
- This can take a while, BOOM Green circle
- BACKUP IS DONE!
- Now on to the rooting stuff:
- In SP Flash Tool (I am expecting that you closed it and opened it again)
- Check to see if USB Mode is enabled (see above)
- Load the SCATTER file again
- Then when you see the files and checkboxes in the window under click on BOOTIMG and SELECT the one
that is attached to this post (!!!!NOTE This is the same BOOTIMG from the serbian video on youtube WE ONLY NEED THE BOOTIMG FROM THIS GUY NOTHING ELSE ESPECIALLY NOT THE SCATTER!!!!)
- Ignore the following messages
- Make sure that your phone is not plugged in, turned off and battery removed
- Press Download, wait 15 sec, plug the phone in THEN insert battery
- Wait for it.. (Nice one)
- A yellow bar will go across and BOOM Green circle
AT THIS POINT YOU HAVE FLASHED YOUR BOOTIMG IF YOU HAVE DONE THIS RIGHT THERE WOULD BE NO PROBLEMS, IF IT'S DONE WRONG YOUR PHONE MIGHT NOT RECOGNIZE THE SIM CARD (IF THIS HAPPENS DO THE LAST STEP AGAIN BUT WITH THE BOOTIMG FROM THE BACKUP)
- Unplug phone, remove battery, insert battery -> BOOT
If it boots, OK, if not flash back with backup (see above written in BIG letters
- Download SuperOneClick and open it
- Plug in your phone TURNED ON!
- Click Root. Reboot. DONE
If anything else pops up you have a problem with the drivers make sure that the drivers are correctly installed (stupid Windows rrrr...)
Now you have rooted you ALCATEL OT-985n/d and can do all kinds of crazy stuff... :cyclops:
DISCLAIMER:
I AM NOT RESPONSIBLE FOR THE DAMAGE TO YOUR PHONE, YOU, OR ANY OTHER MEMBER OF YOUR FAMILY.
WON'T BE HELD AT CHARGE IF YOUR PHONE BLOWS UP, FALLS DOWN AND ERRADICATES HALF OF THE HUMAN RACE AS A RESULT OF MOLECULAR MUTATION CAUSED BY THE GAMA RADIATION BLA BLA YOU GET MY DRIFT..
THIS POST IS A RESULT FROM VARIOUS POSTS (and screwing up my phone multiple times) PUT TOGETHER IN THE METHOD THAT WORKED FOR ME!
CREDITS:
WOULD LIKE TO THANK
giuaig - this is all yours buddy :good
and every other member that banged their head at this for days.. screwed up their phone at least twice and had the nerve to cope!
Bye everybody
Need help in restoring Android and custpack
Hi everybody!
I need some help to restore my 985. I succeeded rooting the phone with this great guide but I messed up with /custpack trying to remove some factory apps (facebook, operator apps...) with the result of having an unusable device stuck in the boot process and rebooting before the system is up in an infinite cycle.
I tried to restore my custpack backup made before rooting with no results. After some whole nights spent asleep to find factory ROM or updates
which seems can't be found on the net, I took the fool decision to format the whole ROM trying to make One Touch Updater S search the firmware and restore the phone but it didn't, leaving me with a message like "You already got the latest version for your phone" (kidding?).
I managed to restore some partition backups with SP Flash Tool. Now the phone can turn on, show the battery-charging logo, the android logo and the recovery system. But it won't boot in normal mode: it gets stuck at the Android logo with no further steps. ADB can discover and recognise the stuck device, but won't let me reach a shell ("/system/bin/sh not found" or something similar). SPFT seems to let me download the Android and custpack images but at the end it fires an error about DRAM.
Is there any Alcatel One Touch 985 user that can send me Android and custpack images to restore my phone?
Hallo guys. Thanks for opening this thread.
My OT985 is stuffed with bloatware from an Italian Carrier, that makes it impossible to download updates and new apps (I can't even download G+).
Do you think that flashing an original stock rom will fix my issue? Does anybody out there have a non-branded backup rom I could possibly use?
Thank you for any help and replies.
AlcaWel said:
Hi everybody!
I need some help to restore my 985. I succeeded rooting the phone with this great guide but I messed up with /custpack trying to remove some factory apps (facebook, operator apps...) with the result of having an unusable device stuck in the boot process and rebooting before the system is up in an infinite cycle.
I tried to restore my custpack backup made before rooting with no results. After some whole nights spent asleep to find factory ROM or updates
which seems can't be found on the net, I took the fool decision to format the whole ROM trying to make One Touch Updater S search the firmware and restore the phone but it didn't, leaving me with a message like "You already got the latest version for your phone" (kidding?).
I managed to restore some partition backups with SP Flash Tool. Now the phone can turn on, show the battery-charging logo, the android logo and the recovery system. But it won't boot in normal mode: it gets stuck at the Android logo with no further steps. ADB can discover and recognise the stuck device, but won't let me reach a shell ("/system/bin/sh not found" or something similar). SPFT seems to let me download the Android and custpack images but at the end it fires an error about DRAM.
Is there any Alcatel One Touch 985 user that can send me Android and custpack images to restore my phone?
Click to expand...
Click to collapse
I think I have a backup but I'm new and can't post links... I'll be back!
help me for mt65x3 driver
hi all,
i need help for installing the mt65x3 driver.
My ot 985d has USB\Vid_1bbb&Pid_00f2&Rev_0255&MI_01
USB\Vid_1bbb&Pid_00f2&MI_01
this device is by Mt65x3 Driver Installation not suported.
Sorry for my bad english, im for german
Thanks for our help ! ! !
Hi to all . Is there any user of 985d who can back up and send me the original boot.img of the device?
Hi all,
first I was runing into numerous problems with this guide, so I switched to this one and I managed to do a lot more: http://forum.xda-developers.com/showpost.php?p=38337401&postcount=5
But with that other guide, I couldn't go further than step 8, because error "PMT changed for the ROM, it must be downloaded." would pop-up.
The same would happen if I followed the steps after "Now onto the rooting stuff" - the error "PMT changed for the ROM, it must be downloaded." pops-up instead of a "green circle".
Can anyone help resolve this?
Hello all,
I have googled, and searched forums high and low to no result so I thought i'd ask.
I recently purchased "KVD APOLLO ONE K6589 Quad-Core Android 4.2.1 WCDMA Smartphone w/ 5.5"
Im new so I can't post external links, however if you go to google or deal extreme and search, you'll find it easy enough.
The phone itself was next to nothing ($180) so even if its Unrootable, I'm not too fussy.
I would however prefer it rooted, I have read that you can basically use the MTK6577 rooting tool on the device?
Would this risk bricking the device.
I'v attempted to contact the manufacturer however to no avail! This is a rather new model so I know im being a tad impatient but if anyone can help then please do
Thanks guys
Potentional Tutorial
philipkroberts said:
Hello all,
I have googled, and searched forums high and low to no result so I thought i'd ask.
I recently purchased "KVD APOLLO ONE K6589 Quad-Core Android 4.2.1 WCDMA Smartphone w/ 5.5"
Im new so I can't post external links, however if you go to google or deal extreme and search, you'll find it easy enough.
The phone itself was next to nothing ($180) so even if its Unrootable, I'm not too fussy.
I would however prefer it rooted, I have read that you can basically use the MTK6577 rooting tool on the device?
Would this risk bricking the device.
I'v attempted to contact the manufacturer however to no avail! This is a rather new model so I know im being a tad impatient but if anyone can help then please do
Thanks guys
Click to expand...
Click to collapse
philipkroberts said:
Hello all,
I have googled, and searched forums high and low to no result so I thought i'd ask.
I recently purchased "KVD APOLLO ONE K6589 Quad-Core Android 4.2.1 WCDMA Smartphone w/ 5.5"
Im new so I can't post external links, however if you go to google or deal extreme and search, you'll find it easy enough.
The phone itself was next to nothing ($180) so even if its Unrootable, I'm not too fussy.
I would however prefer it rooted, I have read that you can basically use the MTK6577 rooting tool on the device?
Would this risk bricking the device.
I'v attempted to contact the manufacturer however to no avail! This is a rather new model so I know im being a tad impatient but if anyone can help then please do
Thanks guys
Click to expand...
Click to collapse
Also looks like im getting the Star N9589 just due to the more support available.
Anyhow until then, failing any answers from here, another chinese forum a spanish one and Yahoo answers I am going to go with the following method, If it dies, It dies this was my own fault for not doing enough research and at least it lets others know. I would send it back to DX But cba with postage fees and the hassle;
THIS IS DONE AT YOUR OWN RISK! -
APOLLO ONE - MTK 6589 K6589
Please note all tools and zip files mentioned I cant link to yet should you feel you want them please post in this thread and I will PM you, Gotta get my post count up first!
Guide by philipkroberts Twitter @philipkroberts
Revision 1 - People to be added to credits for leehed source, currently untested, concept only
Before anything try and boot into any form of recovery mode and backup if possible!
DISABLE UAC in WINDOWS 7
RIGHT CLICK RUN AS ADMIN ON ALL FILES
ALLOW NON TRUSTED DRIVER INSTALLATION (Google this if unsure)
On the phone install anububu on pc phone. - See what model it detects as and note it down.
Run MTK DROID TOOLS and connect phone see if drivers After a few seconds, the box should turn blue, and it should say "Apollo ONE or Other Name " besides it. The drivers are working.
If not try the other drivers in the drivers folder using device manager, there are many tutorials for this I cba typing one im so tired! and make sure you have the only trusted drivers thing turned off, if you constantly get unknown driver then your out of look and wil have to try and source some yourself.
Win7 (This method has not been tested by myself. Confirmation required.)
HOW TO MANUALLY INSTALL ANY DRIVERS IF NEEDED
a - Downloading This tool Called EASYBCD
b - Use it to restart your computer in advanced boot mode. (PRESSING F8 WHILST BOOTING UNTIL YOU GET THE OPTION FOR Disable signed driver enforcement)-Must be done everytime you wanna root a phone with this method.
c - Follow instructions and disable SDE.
d Manually install drivers, if above did not work (Yellow sign issue)
e Navigate to control panel - > Hardware and Sound - > Device Manager
f You should see a driver notice with a yellow warning sign next to it.
g Right click on it and choose "Update driver..".
h- Manually assign drivers, usually the choice furthest down.
i- In the window which should have appeared, navigate to the preload/Mt6590 folder and press OK.
j- If SDE is turned off, you should see a red warning window. This is normal, just accept the message prompted.
k- The drivers should now be successfully installed.
l - Once this is done open C:\Users\Hate\Desktop\Chinese Droid Rooting\MTKROOT TOOLS\Root_with_Restore_by_Bin4ry_v28\runme.bat Hope it ****ing works if so your rooted, If not try this next few steps, AGAIN at your own risk, no need to format just continue from here.
THE FOLLOWING STEPS ARE FOR THE STAR S5 - SAME PROCESSOR BUT NO GARUNTEE. DO NOT FOLLOW THESE STEPS UNLESS YOU ROOTED ANOTHER WAY AND NOW JUST WANT TO INSTALL A CWM
THE FOLLOWING STEPS ARE FOR THE STAR S5 - SAME PROCESSOR BUT NO GARUNTEE. DO NOT FOLLOW THESE STEPS UNLESS YOU ROOTED ANOTHER WAY AND NOW JUST WANT TO INSTALL A CWM
THE FOLLOWING STEPS ARE FOR THE STAR S5 - SAME PROCESSOR BUT NO GARUNTEE. DO NOT FOLLOW THESE STEPS UNLESS YOU ROOTED ANOTHER WAY AND NOW JUST WANT TO INSTALL A CWM
THE FOLLOWING STEPS ARE FOR THE STAR S5 - SAME PROCESSOR BUT NO GARUNTEE. DO NOT FOLLOW THESE STEPS UNLESS YOU ROOTED ANOTHER WAY AND NOW JUST WANT TO INSTALL A CWM
0 - Use PC to copy UPDATE-SuperSU-v.1.25.zip to the root of SD CARD, do not unpack just leave whole zip there.
1 - Turn off your phone, remove your battery. (Do not connect your phone to the computer yet!)
2 - Navigate to the "SP Flash Tool" folder, and run the tool.
3 - On the right side of the tool, there should be a button, iconed with a folder, named "Scatter-Loading". Click this.
4 - Navigate to the "Yulypis Recovery" folder, and double-click on the "Mt6589_Android_scatter-emmc.txt".
5 - You should be back at the SP Flash Tool start-screen, and there should have appeared a list of text and hex-codes.
6 - The "Recovery" line, should be ticked off, and preloader should be red.
7 - Now, click on the button named "Download", with a blue arrow on it. Press "YES" on the NOT ALL images has been correctly loaded warning.
8 - Connect your phone to a USB 2.0, with removed battery. The program should now work, and if drivers is set up correctly, the 0% will turn 100% and a green circle will appear in the middle of the screen. If your phone disconnects before the flashing tool is able to recognize your device, try putting the battery back into the phone before running SP Flash tool. Additionally, if this doesn't work, try using different drivers in the drivers folder
9 - Disconnect your K6589 from the computer when you see the green circle, insert the battery and boot the phone. Wait for it to get to the start screen.
11 - Installing SuperSU through Yulypis recovery
12 - Run "MtkDroidTools.exe" from the folder.
13 - Connect your device, and after a few seconds, information about your device should appear.
14 - Click on reboot, on the mtkDroidTools start-screen, and choose "..recovery".
15 - If recovery has been properly flashed, your device will now enter Yulypis recovery. Blue, with english text.
16 - Controllers: "Power = Enter, Initialize", "Volume down = Scrolling down". (Don't remember if volume up was bugged or not)
17 - Enter "Install zip from SDcard" - > Navigate to the earlier copied "UPDATE-SuperSU-v.1.25.zip and initialize it by pressing the power button.
18 - Follow the on-screen instructions, and it should be prompted to install after 1-2 more screens.
19 - Reboot the device by clicking on "+++++back+++++" and "Reboot now / Reboot Device".
Either way I am going to smash this in a week or so when the phone arrives from DX and will keep people update.
Peace
Please I want to buy this phone. Can you answer me a few doubts I have?
- How is the viewing angle? Cause i purchased a tablet from china and the angle is very bad.
- Has proximity sensor?
Are you ok with the phone?
thank you.
cabrote said:
Please I want to buy this phone. Can you answer me a few doubts I have?
- How is the viewing angle? Cause i purchased a tablet from china and the angle is very bad.
- Has proximity sensor?
Are you ok with the phone?
thank you.
Click to expand...
Click to collapse
I'm still awaiting the phone, hence why that guide is at your own risk.
However from what I have been told and gather that should root the phone no problems.
As for custom roms, I wouldn't even bother trying!
Once the phone gets here I will test my tutorial and re-write it into a more easy on the eyes fashion.
Thanks
http://www.fastcardtech.com/APOLLO-ONE-K6589?u=37825
They sell the phone, for an extra $3 they root before sending.
It cant be that hard, I'd love to know someone in that factory!
I'm looking for a link to download the full stock firmware for this device.
Anyone, please?
...or at least a firmware dump from a non-modified working phone.
One could use MTK Droid Tools and SPFlash to perform this task easily.
PM me for assistance if you need it.
Thank you.
The definite guide to rooting Samsung Galaxy J3(2016) SM-J320FN & FRP Locked Bootloop
As first I have to say, I had to create a thread in Q&A because of the low rank, but I am sure this can be moved to the J3 section as there are many questions on how to gain root access to this device. This guide can work on the SM-J320F model as well, but it hasn't been tested on other models, so don't try it !
Lets start :
Dont forget to Backup all your data before the process !!!
1. Tick USB Debugging and OEM Unlock in Developer Mode (OEM has to be ticked to unlock the bootloader)
2. Connect to PC with USB Cable and open Odin
3. Power off and reboot into Download Mode (VOL.DOWN+HOME+POWER)
4. Add twrp.zip to AP tab
5. Untick Auto-Reboot and Start
6. Wait to finish
7. When it's finished hold (VOL.DOWN+VOL.UP+HOME+POWER) to Power Off
8. Load into TWRP Mode (VOL.UP+HOME+POWER)
9. In TWRP first go to the Wipe Tab, check Cache and Data and click Wipe
10. Copy SuperSU into internal memory from your PC
11. Go back to TWRP and select Install, select the SuperSU from the internal memory and click install without ticking anything, then reboot
12. Wait for the phone to reboot, it may boot-loop a few times, and it boots slowly but dont interrupt the process !
13. From there on, check the root status by downloading Root Checker from PlayStore
KEEP OEM-UNLOCK ON ALL THE TIME, IF YOU DONT WANNA END UP WITH A BRICKED DEVICE(CUSTOM BINARY WAS BLOCKED BY FRP LOCK)!!!
If that happens, here is an official guide from the Samsung Kies Support Page :
IMPORTANT: You may need your device model name, S/N number, or IMEI number in order to proceed. This information can be found on the label underneath your device battery.
WARNING: This process permanently deletes all personal information from the device. The information will not be recoverable if you proceed with this process.
1. Open Kies 3 and click Tools > Firmware Upgrade and Initialization.
2. Enter your device Model name and click OK.
3. Enter the device S / N number and click OK.
4. Kies 3 will verify that the feature is available for your device. If the feature is available, click OK to continue.
5. The firmware version is displayed along with a note that the information on your device will be permanently deleted during this process. Click OK to continue.
6. Follow the steps to prepare your device for emergency recovery. Mark the checkbox next to I have read all of the above information. Select whether you agree to share this update with Samsung. Connect your device to Kies when you have activated the download mode. When your device is in download mode and connected to Kies 3, the Start upgrade button is available. Click Start upgrade to reinstall the firmware.
7. Touch Create backup to create a copy of selected items before proceeding. Touch Skip backup to proceed without backing up any items.
8. Kies 3 will download and prepare your system to update the firmware. This process can take some time. The time will vary based on your network and computer capabilities.
9. Respond to any security warnings about installing software.
10. The progress screen is shown during the upgrade process. The process will take several minutes to complete. Do not disconnect your device, turn the device off, or turn off your computer during this process.
11. Click OK when the upgrade is finished.
Therefore I provide you all the needed files to do this :
How to root SM-J320FN.rar
Works like a charm on J320FN.
I signed up just to say, after hours of trying different guides, accidentally factory resetting once or twice, and getting my phone stuck in a boot loop, this method worked. BUT it did factory reset my phone, but that's fine I've everything backed up and it wont take long to get it back. Maybe I pressed something I shouldn't have.
Some info on my phone in case it helps anyone in a similar position to how I was:
At one point I installed stock firmware from to get my phone out of the boot loop, I can't link it but if you google "J320FNXXU0APB4_J320FNO2C0APC1_O2C" (WITH quotes) you should find the page.
After doing that:
Android version: 5.1.1
Model number: SM-J320FN
Kernel version: 3.10.65-7225942 (Sun Feb 14 2016)
Build no: LMY47V.J320FNXXU0APB4
Baseband version: J320FNXXU0APB5
I hope I typed all that right. Thank you so much!!
have anyone tried on j320v?
kekambas18 said:
have anyone tried on j320v?
Click to expand...
Click to collapse
Going to attempt that right now wish me luck.
---------- Post added at 08:06 PM ---------- Previous post was at 07:09 PM ----------
And it didn't work. Not suprised, but I at least tried.
GN9166 said:
4. Add twrp.zip to AP tab
10. Copy SuperSU into internal memory from your PC
Click to expand...
Click to collapse
Hey, why this guide doesn't mention that I have to download something. It's definitely NOT definitive! What is twrp.zip? Where do I take it from? What is AP tab? Where exactly do I copy SuperSU? What will happen in the download mode?
Problems in Root J320AZ
My name is Dario Lobos. I am working as a gardener and I am making a little application in my phone. I don't have computer so I did it in Java n-ide. I started with a Samsung core prime but the screen was broken and I did change it and the technicians broke it and gave me an Samsung s320. Android 6 (api23) and after that the java n-ide don't compiles the permits that I am requesting in the manifest so I can't grant permissions to my apk. Parallel of it the phone always show a notice unauthorized actions have been made please restart the phone to undo the unauthorized actions. And the lookout said message root access detected. I wrote Samsung without any positive answer. No technical assistance at all. But the roots checkers says that I have no root in my phone. Now I am trying to do a root. But I don't know if someone have a hidden root access in my phone. A page suggest Framaroot and you suggest kingroot. I don't want to store all my phone in their server to root it. Does any program that don't access to all the data to root the phone?. I am writing you since you have more experience to request you if it is in your possibilities. Also to ask you about prompt root commands. Where I can find info about that. A suggestion to solve my problem. My simple all is here
....github.com/DarioLobos/sistemariego
....github.com/tranleduy2000/javaide/issues/163
....1drv.ms/u/s!Asr3Ewn45KOLtGOqDkoMq20A-hbc?e=24Wwx3
The system don't let me put url since I am new add please http...
Well thank you in advance and any help is wellcome
Regards,
Dario Lobos
Adding more information to what I did to try to find a an answer. I tried to root with Frama root 1.9.3 and the installation only request me access to the camera and after installed the programs showed a banner that said can't root your device.
Today I downloaded from firmware.mobi some zip and img files but I already I couldn't learn how to use them properly.
I am trying to avoid the exploids system because maybe is a hacker in the middle. Always I am trying to root w/o SIM card and with Wi-Fi off. So I think that kingroot and kingoroot are not useful for my.
I am trying to buy an old desktop computer as an alternative.
Well any suggestion is usefull and wellcome.
Before of all of that I did two factory reset in recovery mode.
Then I installed an apk Dev Tools (trinea) and one menu request me developer permit in accesibility setting. The phone started to change the color of the screen and the outside padding start to flashing red. Then was open a setting menu and the language was changed suddenly to Japanese or Korean while the screen was lighting like receiving knoks. I turned of the phone and restarted and hopefully I remembered the position in settings to change the language.
After that I had to use an apk repair system and fix Android and the screen get better but the padding outside still flashing in red ones in a while.
Also where added plenty sha certificates (settings user certificates) like system certificates
Go daddy
VeriSign
Some governments (Turkish, Spain, Japan, Germany, Holland, and more)
The Catholic religion with 6 certificates called
Quo Basis
And much more.
So I did another factory reset recovery mode. And the screen problem disappeared and the certificates that I turned off manually firt too (All) but the root alert in the look out and the security notice didn't disappeared.
Today I wanted to print your forum page and the phone put error. Only put error in your forum page.
Other thing that I had to to just after the unpackage the restored Android is disable the setup and transfer. Because I think that is this apk that were using to access and modify my files and grants permissions.
I installed the TWRP application but said the phone have no root.
Today I opened the developer option in settings and turned to on the OEM option to unlock the boot loader but instead of put a banner saying that all data will be erased put a banner saying that the device protection will be not work and didn't do the reboot or nothing more that put this dialog.
Dario Lobos
great, unlocken/rooten worked here. But after that, the mobile became unusable. All google apps complain no connection is available. I cannot update google play store, cannot update other google apps like youtube, or install any app now.
And perhaps it does not have anything to do with the mentioned process, but before I started the process, I made sure all nessacary file were on the sd card. But now I have finished wiping the data / cache from the recovery and all files on the sd card are gone.
I cannot login to google photos to see if the apps are backupped because every google app complains no internet connection is available.
So yes, rooting/unlocking worked, but that's the only thing that worked here. I now got a useless Samsung J3 2016...
I need assistant trying to root my J320FN, which I mistakenly wipe some backed up recovery file now, I can not get through with the rooting and I can get back to forma phone setting am locked up , samsung phone not coming up again please what can I do ?
GN9166 said:
The definite guide to rooting Samsung Galaxy J3(2016) SM-J320FN & FRP Locked Bootloop
As first I have to say, I had to create a thread in Q&A because of the low rank, but I am sure this can be moved to the J3 section as there are many questions on how to gain root access to this device. This guide can work on the SM-J320F model as well, but it hasn't been tested on other models, so don't try it !
Lets start :
Dont forget to Backup all your data before the process !!!
1. Tick USB Debugging and OEM Unlock in Developer Mode (OEM has to be ticked to unlock the bootloader)
2. Connect to PC with USB Cable and open Odin
3. Power off and reboot into Download Mode (VOL.DOWN+HOME+POWER)
4. Add twrp.zip to AP tab
5. Untick Auto-Reboot and Start
6. Wait to finish
7. When it's finished hold (VOL.DOWN+VOL.UP+HOME+POWER) to Power Off
8. Load into TWRP Mode (VOL.UP+HOME+POWER)
9. In TWRP first go to the Wipe Tab, check Cache and Data and click Wipe
10. Copy SuperSU into internal memory from your PC
11. Go back to TWRP and select Install, select the SuperSU from the internal memory and click install without ticking anything, then reboot
12. Wait for the phone to reboot, it may boot-loop a few times, and it boots slowly but dont interrupt the process !
13. From there on, check the root status by downloading Root Checker from PlayStore
KEEP OEM-UNLOCK ON ALL THE TIME, IF YOU DONT WANNA END UP WITH A BRICKED DEVICE(CUSTOM BINARY WAS BLOCKED BY FRP LOCK)!!!
If that happens, here is an official guide from the Samsung Kies Support Page :
IMPORTANT: You may need your device model name, S/N number, or IMEI number in order to proceed. This information can be found on the label underneath your device battery.
WARNING: This process permanently deletes all personal information from the device. The information will not be recoverable if you proceed with this process.
1. Open Kies 3 and click Tools > Firmware Upgrade and Initialization.
2. Enter your device Model name and click OK.
3. Enter the device S / N number and click OK.
4. Kies 3 will verify that the feature is available for your device. If the feature is available, click OK to continue.
5. The firmware version is displayed along with a note that the information on your device will be permanently deleted during this process. Click OK to continue.
6. Follow the steps to prepare your device for emergency recovery. Mark the checkbox next to I have read all of the above information. Select whether you agree to share this update with Samsung. Connect your device to Kies when you have activated the download mode. When your device is in download mode and connected to Kies 3, the Start upgrade button is available. Click Start upgrade to reinstall the firmware.
7. Touch Create backup to create a copy of selected items before proceeding. Touch Skip backup to proceed without backing up any items.
8. Kies 3 will download and prepare your system to update the firmware. This process can take some time. The time will vary based on your network and computer capabilities.
9. Respond to any security warnings about installing software.
10. The progress screen is shown during the upgrade process. The process will take several minutes to complete. Do not disconnect your device, turn the device off, or turn off your computer during this process.
11. Click OK when the upgrade is finished.
Therefore I provide you all the needed files to do this :
How to root SM-J320FN.rar
Click to expand...
Click to collapse
The link says "the key is invalid"
Seeing how this phone just recently came out in January I haven't really found too much info out there so maybe this can be a start.
I've tried to unlock the bootloader but couldn't get fastboot to work and I tried kingroot and that failed. iIt has 12 requests for this phone so far.
So I'm pretty stuck right now on what to do I'm kinda a noob so maybe y'all can help me out a lil on what to do if anymore info is needed please let me know.
Thanks in advance
Greetings, I am noob too, but I am learning. I cannot answer your question about unlocking the bootloader, however, someone gave me an Alcatel Verso that had frp lock screen. Got limited access and installed an app called quickshortcutmaker. This allows running all the activities. There is a system app on mine called engineer mode. This reveals the actual file system as well as other info.
It appears there is not a reboot bootloader mode, it does have reboot recovery, but also I do not think it has fastmode. There is another mode called download mode, but I have not successfully used this for anything. Also, connecting usb abd in recovery mode yields device unauthorized.
If you are interested, I'll explain how I got frp partially bypassed. Added emergency contact, added an email, a prompt came up asking me which service to use, there were like four options like google, etc. I chose one I had not heard of that had the word executive, because it sounded official. When I chose it, another prompt came up saying that in order to use this service I had to set up a lock screen, make sure func is enabled. When I then turned the screen off and back on, I had a google search option from the lock screen. Pressed it and said "open settings", enabled install of unknown sources, used google search and said "open chrome". Used chrome to download quickshortcutmaker. Used google search and said "open file manager". Used file manager to install quickshortcutmaker. At this point I could have just used the phone from there, however... I added quickshortcutmaker to the func lock screen list by using google search to open settings. Then from the lock screen, I could launch quickshortcutmaker (or use google search). I then used quickshortcutmaker to run 'joy launcher' and voila, in. However, only the back button worked, and if I tried to log into google, it would bring up the frp lock screen. So, using the quickshortcutmaker, I ran every activity on the phone, and using the engineermode system app (I am pretty sure it was that one) I toggled an option called 'demo mode'. Upon exiting this system app and pressing the square button next to the home and back button, I saw an option to accept user agreement, or something like that. I scrolled down and checked the box, and voila, frp lock totally gone, and now I can log into google.
Now I am trying to root, but first I must unlock the bootloader.
diorthotis said:
Greetings, I am noob too, but I am learning. I cannot answer your question about unlocking the bootloader, however, someone gave me an Alcatel Verso that had frp lock screen. Got limited access and installed an app called quickshortcutmaker. This allows running all the activities. There is a system app on mine called engineer mode. This reveals the actual file system as well as other info.
It appears there is not a reboot bootloader mode, it does have reboot recovery, but also I do not think it has fastmode. There is another mode called download mode, but I have not successfully used this for anything. Also, connecting usb abd in recovery mode yields device unauthorized.
If you are interested, I'll explain how I got frp partially bypassed. Added emergency contact, added an email, a prompt came up asking me which service to use, there were like four options like google, etc. I chose one I had not heard of that had the word executive, because it sounded official. When I chose it, another prompt came up saying that in order to use this service I had to set up a lock screen, make sure func is enabled. When I then turned the screen off and back on, I had a google search option from the lock screen. Pressed it and said "open settings", enabled install of unknown sources, used google search and said "open chrome". Used chrome to download quickshortcutmaker. Used google search and said "open file manager". Used file manager to install quickshortcutmaker. At this point I could have just used the phone from there, however... I added quickshortcutmaker to the func lock screen list by using google search to open settings. Then from the lock screen, I could launch quickshortcutmaker (or use google search). I then used quickshortcutmaker to run 'joy launcher' and voila, in. However, only the back button worked, and if I tried to log into google, it would bring up the frp lock screen. So, using the quickshortcutmaker, I ran every activity on the phone, and using the engineermode system app (I am pretty sure it was that one) I toggled an option called 'demo mode'. Upon exiting this system app and pressing the square button next to the home and back button, I saw an option to accept user agreement, or something like that. I scrolled down and checked the box, and voila, frp lock totally gone, and now I can log into google.
Now I am trying to root, but first I must unlock the bootloader.
Click to expand...
Click to collapse
You can use this guide for your phone:
https://forum.xda-developers.com/canvas-juice/how-to/guide-unlocking-bootloader-rooting-t3705781
HIT THANKS IF FOUND USEFUL
No, it does not work. I am having several issues. First, I cannot get adb windows drivers to recognize this device, I have installed every qualcomm driver I could find, also tried the universal adb drivers and even the drivers that come with the phone. Nothing works.
However, I have a rooted tablet with an otc cable that does connect via adb. However, adb reboot bootloader simply reboots the phone. There is a download mode, but I do not have fastboot installed on the tablet, so I cannot check if download mode = fastboot.
I am able to adb push files to /data/local/tmp and running adb shell chmod 755, I have succesfully unstalled busybox and can execute commands such as vi. The user is still not root, but I feel I am close.
I tried to download the emmc internal memory using backup qualcomm tool, but I seem to not have the correct drivers for my phone. My plan was to edit ro.debuggable to 1 and reflash, so I can adb root and remount as rw.
Best I can do so far
So far cracking it is still undone...but I can offer up some advice...download 3c, advanced tools and dev tools. A notepad++ would help too so you can re-create rom commands to make your own. Use advanced tools to look for vendor. Once there you should see a few files that make you question Google's business practices. Go into them to make alterations using dev toolds. The rest of the files can be re-made from scratch using notepad and 3c's rom manager.
This phone is complete garbage, I ended up giving it away because the touch screen would go to random spots on the phone randomly. It appears to be a cheap phone I do not like. Got an LG that as far superior.
I may have a Root method for the 5044R and the 5044C, I need someone with the 5044R and 5044C to get in contact with me. Best way to do that is Telegram. Here is the Link: https://t.me/Android_General_Chat
I'm currently Testing Root on the 5044C
---------- Post added at 12:56 AM ---------- Previous post was at 12:42 AM ----------
Alcatel 5044C and Alcatel 5044R PWND and Rooted. Doing 5044C TWRP Recovery now.
UPDATE: TWRP Ported and WORKING. Now somebody make some custom Roms.
I'll have a Custom Stock Rom out for this soonishly if anyone is interested
Alcatel Verso Root Solution
I have an Alcatel Verso (Yes, the Qualcomm 5044c) and the solution from PizzaG works well. The bootloader is unlocked and the phone is rooted. It works better now than when it was new. Thank you, PizzaG!
-
Tip: carefully follow the instructions, try different USB ports and unplug any other USB cables / devices. You will need MS Windows, the .mbn file and Sugar_QCT (from PizzaG).
Where is the root method?
I am just curious of the method used, I do not have this phone.
mrhealthpatriot said:
I have an Alcatel Verso (Yes, the Qualcomm 5044c) and yes, the solution from PizzaG actually works. The phone boots properly, has Magisk, etc. Thank you, PizzaG!
-
Tip: carefully follow the instructions, try different USB ports, unplug any other USB drives and be persistent.
You will need MS Windows and Sugar_QCT (from PizzaG). The phone is rooted, working and more responsive.
Click to expand...
Click to collapse
Of course it works, otherwise I wouldn't have posted it along with modified boot and TWRP. Unsure if I released the modified stock rom or not?
@PizzaG Could you describe the method briefly, or post a link to the method, I am not seeing it.
diorthotis said:
@PizzaG Could you describe the method briefly, or post a link to the method, I am not seeing it.
Click to expand...
Click to collapse
I use the Alcatel Internal flashing software. It grabs the firmware files from their servers. I then swap their boot image for my modified image and then use the software to flash the device. It's then rooted and you can install TWRP or swap recovery files in the Flasher software and it will flash for you. Device must be bootloader unlocked from the factory but they disabled fastboot.
Thank you, do you have a link for instructions on how you modified the boot files, and which ones?
diorthotis said:
Thank you, do you have a link for instructions on how you modified the boot files, and which ones?
Click to expand...
Click to collapse
Once the program downloads the firmware, I was able to get some good info from the flashing logs that told me what every file is. So I just grabbed the B file which is boot and ran it through magisk manager to patch it. Pretty easy peasy. TWRP I just ported from another msm8909 device. The TWRP for 5044C also woks for 5044R models as well as the whole rooting procedure. I would build some more recoveries for it from source but I don't have the device so I can't be bothered with that unless someone wants to donate towards the cause.
Verso Unlocking
This is basically how I unlocked the phone. First, I went into developer options and allowed "OEM Unlocking* and "USB Debugging." Then I opened Windows and downloaded the Actatel drivers. I also installed SugarQCT and the *.mbn file from PizzaG's website. Once Windows and ABD recognize the phone., I launch SugarQCT. I used the version from PizzaG, but said no to any update requests. (It crashed after it updated itself.). In SugarQCT, I started the phone firmware flash process and pasted the *. mbn file into the "5044c" folder that the program creates during flashing. It is important to overwrite the existing *.mbn while SugarQCT is downloading the firmware files so that the newly pasted version is flashed to the phone. Once it is done, SugarQCT deletes the entire temporary folder. When the "flashing completed" or "success" message pops up, just reboot the phone and set it up as usual. I used Flashify to flash Magisk to the recovery since PizzaG's ".mbn installs SuperSu.
mrhealthpatriot said:
This is basically how I unlocked the phone. First, I went into developer options and allowed "OEM Unlocking* and "USB Debugging." Then I opened Windows and downloaded the Actatel drivers. I also installed SugarQCT and the *.mbn file from PizzaG's website. Once Windows and ABD recognize the phone., I launch SugarQCT. I used the version from PizzaG, but said no to any update requests. (It crashed after it updated itself.). In SugarQCT, I started the phone firmware flash process and pasted the *. mbn file into the "5044c" folder that the program creates during flashing. It is important to overwrite the existing *.mbn while SugarQCT is downloading the firmware files so that the newly pasted version is flashed to the phone. Once it is done, SugarQCT deletes the entire temporary folder. When the "flashing completed" or "success" message pops up, just reboot the phone and set it up as usual. I used Flashify to flash Magisk to the recovery since PizzaG's ".mbn installs SuperSu.
Click to expand...
Click to collapse
oh, did I really do it with SuperSU? My bad on that. Seems weird I'd use that. But yep, nice job of explaining the procedure. You should be nice and post your magisk patched version of boot.img or pass it to me to further modify it and i'll post it on here. I'd like to make it selinux permissive and remove the line of code that reflashes stock recovery on reboot. If you used my original SuperSu patched image and then repatched it with Magisk, then it wouldn't need to be repatched for selinux and such.
Flashing Files
Actually, I didn't patch the boot image or modify any files. I used the 5044C_TWRP.img and BVT4H1H0CL10.mbn that you posted. I have an Alcatel rom from Needrom, but I didn't use that either. I flashed Magjsk.zip with flashify, but I could have flashed it via adb. SuperSu was already installed..