Polaroid P10 Tablet - Android Q&A, Help & Troubleshooting

Not sure this is the right place to post this but here goes. I just bought a Polaroid P10 tablet today. I wanted to root it, but can't find any information available about this product except unboxing videos. Running Kitkat 4.4.2 Kernel 3.3
I found a root using towelroot, but when I click on the icon, it just opens up a page with code and doesn't do anything. I'm a total noob and don't know much about rooting, but people tell me it's the only way I can add my own content. Any help is appreciated. Please and Thanks

Not currently supporting the Polaroid P10 Device, unfortunately.
MarlaSinger13 said:
Not sure this is the right place to post this but here goes. I just bought a Polaroid P10 tablet today. I wanted to root it, but can't find any information available about this product except unboxing videos. Running Kitkat 4.4.2 Kernel 3.3
I found a root using towelroot, but when I click on the icon, it just opens up a page with code and doesn't do anything. I'm a total noob and don't know much about rooting, but people tell me it's the only way I can add my own content. Any help is appreciated. Please and Thanks
Click to expand...
Click to collapse
I've too purchased the same device tonight, kingo and towelroot do not work

deionj said:
I've too purchased the same device tonight, kingo and towelroot do not work
Click to expand...
Click to collapse
That's a shame. It's a nice tablet. Hopeful that someone will be able to get this thing rooted. Just so I'm clear about "rooting" all this really does is allow installation of apps and music and stuff that was not downloaded at the app store, right? I mean, I'm sure it does more than that if you're a hacker and know what you're doing, but for me, this is the only perk to rooting. I guess I can wait. I only paid 75 bucks for mine. It was 99 originally but 20 percent off and the cashier also gave me another discount cause she was cool. I will keep checking back here in case someone has some good news! I forgot to add that I cannot get my laptop to download the driver for the tablet when I try to connect it.

Er... I'm not sure if the tablet is different but on any other android device I've ever used you can do all of that without root. Feel free to look up "How to enable from unknown sources android" . All it takes is checking one little box in settings. for apps I personally prefer the app from aptoide.

Josh8550 said:
Er... I'm not sure if the tablet is different but on any other android device I've ever used you can do all of that without root. Feel free to look up "How to enable from unknown sources android" . All it takes is checking one little box in settings. for apps I personally prefer the app from aptoide.
Click to expand...
Click to collapse
OK, see I was mistaken about what rooting meant. The first tablet I ever had, I HAD to root to get access to the internal storage. I will try again with this one to even find the internal storage. BUT, I just got this tablet yesterday and already it's resetting itself when I turn it off. I will try to start it and it gets stuck on the loading screen for a while, then It will load and I have to re enter all the setup info. Pain in my a**. I'm taking it back to exchange for a new one in a couple days.

MarlaSinger13 said:
That's a shame. It's a nice tablet. Hopeful that someone will be able to get this thing rooted. Just so I'm clear about "rooting" all this really does is allow installation of apps and music and stuff that was not downloaded at the app store, right? I mean, I'm sure it does more than that if you're a hacker and know what you're doing, but for me, this is the only perk to rooting. I guess I can wait. I only paid 75 bucks for mine. It was 99 originally but 20 percent off and the cashier also gave me another discount cause she was cool. I will keep checking back here in case someone has some good news! I forgot to add that I cannot get my laptop to download the driver for the tablet when I try to connect it.
Click to expand...
Click to collapse
Well I have the Polaroid q10bt that I bought @ Menard's last week for $99 cpu z says it is a p10/q10/ptab1040/ptab1041 I think this is the same as big lots 4gig but mine is 8gig. It is a really nice tablet 4.4 kk quad core processor. But yes root would be really nice. I've tried using kingo root with pdanet driver, (no go) also tried iroot apk app & there PC program which are Chinese to root those failed. Also tried framaroot & even other Chinese root programs I found on YouTube those failed as well. So next I seen that CPU z said my q10 has a all winner a31 processor so I Google root all winner a31, found 2 different zip file apps that u run from update app using stock recovery but yet again those failed. CPU z says tablet is rooted but super su won't update the binary? Well that's all info I have. Hopefully we can work together & hack this bad beast lol! Thanks in advance ppl & have a blessed day! Ron.

I'm gonna try king root on this. It's another Chinese root method & they have apk app & PC version

Dont try Vroot or Kingo theyre malware
Here is working root for the Polaroid Q10/P10/etc. and possibly other 4.4 a31 tablets
Instructions
Make sure you have ADB installed and working for the tablet, it will work with standard ADB drivers, just look it up im too tired to tell you how to make ADB work
1. Make sure USB debug and Dev mode are on
2. Go to settings, backup & restore, then boot into recovery
3. In recovery select ADB sideload and then in cmd prompt type "adb sideload (path to .zip)" and let it update
4. Reboot and enjoy root
This was about 5-6hrs of experimenting, credit goes to those who made SU, Chainfire for SuperSu, etc.
Download
------------------------
https://www.mediafire.com/?l99e2x95mxpkk5u

Echoa said:
Dont try Vroot or Kingo theyre malware
Here is working root for the Polaroid Q10/P10/etc. and possibly other 4.4 a31 tablets
Instructions
Make sure you have ADB installed and working for the tablet, it will work with standard ADB drivers, just look it up im too tired to tell you how to make ADB work
1. Make sure USB debug and Dev mode are on
2. Go to settings, backup & restore, then boot into recovery
3. In recovery select ADB sideload and then in cmd prompt type "adb sideload (path to .zip)" and let it update
4. Reboot and enjoy root
This was about 5-6hrs of experimenting, credit goes to those who made SU, Chainfire for SuperSu, etc.
Download
------------------------
https://www.mediafire.com/?l99e2x95mxpkk5u
Click to expand...
Click to collapse
Wow thanks & I'm gonna try this.

rubberman365 said:
Wow thanks & I'm gonna try this.
Click to expand...
Click to collapse
yea NP
took me a bit to figure out what exactly the issue was
The other a31 root zips arent for 4.4 and dont install all the needed files and permissions for it to work properly in 4.4. I was working on it and remembered chainfire saying something about it a while ago so i found a script designed to install from stock recovery and modified it to work for our device. I might work on a recovery but cant make any promises.
also, once you have root be sure to lower your screen DPI to 120, it makes the UI a bit smaller and in general things tend to look a bit nicer at that DPI on a 1024x600 screen (that should be the screens native DPI)

Echoa said:
yea NP
took me a bit to figure out what exactly the issue was
The other a31 root zips arent for 4.4 and dont install all the needed files and permissions for it to work properly in 4.4. I was working on it and remembered chainfire saying something about it a while ago so i found a script designed to install from stock recovery and modified it to work for our device. I might work on a recovery but cant make any promises.
also, once you have root be sure to lower your screen DPI to 120, it makes the UI a bit smaller and in general things tend to look a bit nicer at that DPI on a 1024x600 screen (that should be the screens native DPI)
Click to expand...
Click to collapse
So I shared your root method with a p10 thread over at www.freaktab.com but made sure to give u all credit for figuring it out. Since I tried all the other root methods but failed, SuperSU installed it self as a system app & wont uninstall & CPU z says tablet has root but SuperSU wouldn't update binary. So question can i still use your root method or would I need to do a factory reset either thru tablet settings or stock recovery. Thanks in advance & have a blessed day! Ron.

rubberman365 said:
So I shared your root method with a p10 thread over at www.freaktab.com but made sure to give u all credit for figuring it out. Since I tried all the other root methods but failed, SuperSU installed it self as a system app & wont uninstall & CPU z says tablet has root but SuperSU wouldn't update binary. So question can i still use your root method or would I need to do a factory reset either thru tablet settings or stock recovery. Thanks in advance & have a blessed day! Ron.
Click to expand...
Click to collapse
No this root method will remove all the bits of older attempts and then install itself :] just flash and be happy.

Echoa said:
No this root method will remove all the bits of older attempts and then install itself :] just flash and be happy.
Click to expand...
Click to collapse
OK thanks, now I just gotta remember & figure out the adb thing since I haven't done anything like that in like 2 years maybe lol.

Echoa said:
No this root method will remove all the bits of older attempts and then install itself :] just flash and be happy.
Click to expand...
Click to collapse
Hey so I actually just used the update app built Into system to boot into recovery & then I just flashed zip file from stock recovery, then cleared cache & rebooted. Then I updated su binary & was good to go. Do u think doing this way was OK being as I now have root or should I have done adb method & side loaded it or should I still attempt to do it that way. Also what do u think about over clocking stock CPU using no thrills CPU or do I need a custom kernel? Also do u think a custom recovery would work on this? Well thanks in advance for all your help & have a great day!!! Ron.

rubberman365 said:
Hey so I actually just used the update app built Into system to boot into recovery & then I just flashed zip file from stock recovery, then cleared cache & rebooted. Then I updated su binary & was good to go. Do u think doing this way was OK being as I now have root or should I have done adb method & side loaded it or should I still attempt to do it that way. Also what do u think about over clocking stock CPU using no thrills CPU or do I need a custom kernel? Also do u think a custom recovery would work on this? Well thanks in advance for all your help & have a great day!!! Ron.
Click to expand...
Click to collapse
no if it worked that way is fine too :] w.e works for you to install i just listed the way i did it. as for overclocking dont set the CPU higher than 1.3ghz or itll lock up as we dont have the ability to adjust the voltage atm. Im working on tearing it down and seeing about updating the screen and getting an SD card to work on custom imgs.
I can tell you its using DDR3L 1333 cas latency 9 and is an Allwinner A31s so far, looking into the other chips to figure if its close enough the the A31 dev board to use the kernel source. Display idk yet, cant get the battery off safely as its glued down pretty tight but i think its the same as a tablet called the Q102. These might be just rebranded versions of those. If we can find a better display that works with the Q102 and a speaker that is the right size we could mod it for better sound and display. Im searching Aliexpress and alibaba for a display thats possible to use. I anyone can find another 10" tablet with a similar size and shape using an a31 with a better screen we might be able to do a transplant.
edit: added board pic, nand is toshiba tc58teg6ddkta00 and bt/wifi is Realtek RTL8723BS, the RT is used on some Rockchip boards so should be able to get drivers for it. Once i get an SDcard ill work on recovery and maybe a custom SDcard img as the hummingboard a31 kernel looks like it might have the power management stuff in it? not sure if the hummingbird a31 using hynix nand and ram will be an issue.

Well, managed to get stuck in recovery bootloop and cant get out of recovery. Im contacting southern telecom for the firmware img but we'll see if i can get it, device works just cant get past recovery xP

Echoa said:
Well, managed to get stuck in recovery bootloop and cant get out of recovery. Im contacting southern telecom for the firmware img but we'll see if i can get it, device works just cant get past recovery xP
Click to expand...
Click to collapse
OK well that sucks, I knew this was a all winner a31 cuz CPU z said it was. Also if u live in the states us, I'm sure u could always get another donor testing tablet either 4 gig p10 from big lots $99 or 8 gig q10bt from Menard's. Well best of luck, thanks in advance for everything u are doing & have a great day. Ron.

rubberman365 said:
OK well that sucks, I knew this was a all winner a31 cuz CPU z said it was. Also if u live in the states us, I'm sure u could always get another donor testing tablet either 4 gig p10 from big lots $99 or 8 gig q10bt from Menard's. Well best of luck, thanks in advance for everything u are doing & have a great day. Ron.
Click to expand...
Click to collapse
Yea perhaps, but im not gonna ask for hardware donations because i got ballzy and didnt wanna wait for an SDCARD lol and i know we knew it was A31 just wanted to confirm because sometimes they lie and wanted to confirm if it was a31 or a31s
If they dont give me the img i will have to try either making a bootable SDCARD so i can write to nand or flash another tablets firmware and hope it works. I might be able to fix it if someone dumps their nand/partitions and then i could try and make a bootable SDCARD and write the stock recovery back in terminal. You can pull the partition imgs through ADB on a running system., probably shouldve done that before i tried to mod recovery lol wouldnt be so bad if i could get usb access in recovery but cant.
EDIT: Looks like im going to have to do the dishonest thing and exchange it at the store saying its broke as they told me there is no firmware available.

Echoa said:
Yea perhaps, but im not gonna ask for hardware donations because i got ballzy and didnt wanna wait for an SDCARD lol and i know we knew it was A31 just wanted to confirm because sometimes they lie and wanted to confirm if it was a31 or a31s
If they dont give me the img i will have to try either making a bootable SDCARD so i can write to nand or flash another tablets firmware and hope it works. I might be able to fix it if someone dumps their nand/partitions and then i could try and make a bootable SDCARD and write the stock recovery back in terminal. You can pull the partition imgs through ADB on a running system., probably shouldve done that before i tried to mod recovery lol wouldnt be so bad if i could get usb access in recovery but cant.
EDIT: Looks like im going to have to do the dishonest thing and exchange it at the store saying its broke as they told me there is no firmware available.
Click to expand...
Click to collapse
Hey no shame bud, lol menards takes anything back. Hey so I tried to change DPI resolution to 120 as u suggested. with 2 apps but they wouldn't work? Did I do something wrong? Also I purchased a really nice wired keyboard case for this tablet at menards it is hip street brand on clearance for $9.99

rubberman365 said:
Hey no shame bud, lol menards takes anything back. Hey so I tried to change DPI resolution to 120 as u suggested. with 2 apps but they wouldn't work? Did I do something wrong? Also I purchased a really nice wired keyboard case for this tablet at menards it is hip street brand on clearance for $9.99
Click to expand...
Click to collapse
I used romtoolbox try that
Also i suppose it works out as its 50$ off so ill get an SDcard and work on a bootable SDcard fr nand restores in case something similar happens. Also word of warning, phoenixsuit doesnt seem to recognze the tablet for some reason, drivers work and all but in FEL mode you cant flash with phoenix it just fails. Number one priority is finding a bootable nand restore method from sdcard. Make sure not to try any other a31 imgs as you maybe soft brick it and not be able to recover.
So far this tablet seems to be pretty modable as long as we find parts that will fit/work. All the peripheral devices unplug easily the only difficult thing is the batter which is glued tight. I may have found 1280x800 IPS screen that'll work with it and looking at finding a better speaker.

Related

[Q] Kuno tablet

I recently received a Kuno Tablet. It has the same physical characteristics as the 10.1 except for the lack of a hdmi out. Its running android 2.3.1 with a 1.2ghz processor. I have been trying to find some way to root this tablet for a few days now and have had no luck whatsoever. As far as I know no one else has even attempted to root one of these. Help of any kind would be appreciated and I will do my best to answer any questions. I am considering trying petes root tools or gingerbreak but i have my doubts that this will work. I have tried to put the device into some sort of recovery mode but have had no luck so far with any of the button combinations I tried.
Hi xsurferx,
the Kuno really looks like the Archos 101... the chinese engineers are incredible.
Under the hood there's different hardware working.
The manufacturers website mentions a [email protected]
http://mykuno.com/kuno-specs.html
Due to this fact there's nothing in common with the way Archos created the firmware on the A101 and the way you could root this device.
You could try to find out how the firmware looks like on your Kuno... but i guess this is not the right place to discuss these things.
Anyway, good luck!
scholbert
Progress
Any progress on trying to root the Kuno tablet? Superoneclick says that it roots it successfully but Superuser does not get installed. Is there at least a way to flash Gapps onto it? I can't even set up a gmail account unless I use the IMAP settings
super one clicks havent worked for me yet either however, i do work for the high school that i attend on their tablets and anything else they need done, through contact with the company that created the tablets ive learned that the tablet does not have a recovery mode and that the tablets actually have to be imaged like a computer would. So once i get my hands on an image i should be able to modify it to allow root access. If that fails im going to try rooting it through adb and installing superuser that way as well
what shcool has the funds to buy tablets like that?
So you just help them>?
lots of them
Many schools are going to one to one devices to try and help students learn and while they are expensive most of it is payed for by grants and other funds. I do anything they need from pc to mac and android. The tablets will be given out to freshman this coming semester and they want to see just how locked down these are and im assuming that rooting them will be the first step to unlocking them from the cirruculumloft software they are using. They want to see how to unlock them so they can prevent it in the future. Which is where i come in.
Status...
The kuno tablet has a recovery system that can only be accessed by flashing a new firmware to it, however, it is not possible to get this firmware without getting it from the company that made the tablet. So...in order to root the tablet you have to create a custom firmware from scratch for the tablet because the firmware on the tablet was designed in such a way that the android market can not run on it. The company removed the directories and other items the market needs to run. You can not connect the tablet through adb, nor can you install from SD or even access the SD card from inside the firmware the tablets are currently running. In order to root this tablet we would need to create a custom firmware and then flash it onto the tablet. Anyone interested in trying? Also, super one clicks will brick the device, I'm surprised yours still worked after that.
new discoveries
The market will run on the tablet, i was lied to on that one. The tablet connects through adb very easily and most commands work in adb. unfortunately you can not reboot into recovery or the boot loader through adb
unrevoked won't find my tablet. what do i do now?
this
http://lmgtfy.com/?q=unrevoked+won't+find+my+kuno+tablet,+What+now?
I work for a company that will be selling these Kuno tablets to schools. A CurriculumLoft Employee told me these tablets are not approved by Google so that makes them not able to use the android market. I have found that these can use the Amazon App market.
Figured it out!!!
After working on this for the better part of 6 months i have finally achieved root and flashed a custom rom with CWM recovery installed. I found that the Kuno tablet is essentially the same as the Arnova 10 G2 tablet with the exception of hard drive size. Here is the link to the site and instructions i used to flash the rom. If any one has any questions let me know.
http://www.freaktab.com/showthread....ot-GingerComb-quot-Custom-ROM-Version-2-1-CWM
HELP
Hello. Questions, what is adb and i've found a site called blapkmarket.com which lets you download apps if you have firefor installed on your kuno. But my firefox browser crashed so i unistalled it and i cant download apps anymore. My last resort is to reset my Kuno completely and take it to my media specialist. any suggestions ??
kuno 3
xsurferx said:
After working on this for the better part of 6 months i have finally achieved root and flashed a custom rom with CWM recovery installed. I found that the Kuno tablet is essentially the same as the Arnova 10 G2 tablet with the exception of hard drive size. Here is the link to the site and instructions i used to flash the rom. If any one has any questions let me know.
QUOTE]
I followed these instruction. I have the Kuno 3 I'm trying to image with this ROM. The screen is split and the touch is not responsive. Any ideas? Did you have this problem?
Click to expand...
Click to collapse
h.abiff said:
xsurferx said:
After working on this for the better part of 6 months i have finally achieved root and flashed a custom rom with CWM recovery installed. I found that the Kuno tablet is essentially the same as the Arnova 10 G2 tablet with the exception of hard drive size. Here is the link to the site and instructions i used to flash the rom. If any one has any questions let me know.
QUOTE]
I followed these instruction. I have the Kuno 3 I'm trying to image with this ROM. The screen is split and the touch is not responsive. Any ideas? Did you have this problem?
Click to expand...
Click to collapse
Hey any update on this topic? Ive got a Kuno 3 looking to install custom rom.
Click to expand...
Click to collapse
Hey any update on this topic? Ive got a Kuno 3 looking to install custom rom.
Click to expand...
Click to collapse
xsurferx is no longer working on this project. He doesn't have a kuno 3 and recommends you don't try the above method, as it is not for a kuno 3.

[Q] LG Optimus Exceed (aka LG Lucid) VS840PP won't take a root

After scrounging, searching, hunting, and generally scrubbing every tree/rock/bush for answers, I have decided that it is time to post. As I am new to these forums, I sincerely appreciate any assistance in this matter. I have tried the only two methods that I can find to root my phone. the one by Bin4ry which is found at http://forum.xda-developers.com/showthread.php?t=1886460. and another one from a different site that was for JB. I have made sure that both debugging is on as well as allowing installations of non-market applications. I have tried every single usb mode, that just on the off chance, mine was that one phone that wanted to seperate itself from society. Since my phone is running ICS 4.0.4 I should be using Bin4ry's version, but I get stopped by this
Code:
======================================================================
= This script will root your Android phone with adb restore function =
= Script by Bin4ry (thanks to Goroh_kun and tkymgr for the idea) =
= Idea for Tablet S from Fi01_IS01 =
= (18.06.2013) v31 =
======================================================================
Device type:
1) New Standard-Root (thx Ariel Berkman)
2) New Xperia Root by Goroh_kun (Xperia Z, Xperia V [JellyBean] ...)
3) Old
4) Old-Special (for example: Sony Tablet S, Medion Lifetab)
G) Google Glass Mode (thx Saurik for the ab file)
x) Unroot
Make a choice: 1
Please connect Device with enabled USB-Debugging to your Computer
Doing a Backup first, please confirm this on your device!
Now unlock your device and confirm the backup operation.
Done!
Press any key to continue . . .
Please select the RESTORE MY DATA option now on your device!
Now unlock your device and confirm the restore operation.
Please press any Key when restore is done.
Press any key to continue . . .
Going to reboot now ...
mount: Operation not permitted
3679 KB/s (380532 bytes in 0.101s)
2668 KB/s (1500495 bytes in 0.549s)
3647 KB/s (1165484 bytes in 0.312s)
remote object '/system/bin/ric' does not exist
.
Going to copy files to it's place
mount: permission denied (are you root?)
Rebooting again, please wait!
Could Not Find C:\Users\USERNAME\Desktop\newroot\ric
Restoring previous Backup! Please select the RESTORE MY DATA option now on your
device!
Now unlock your device and confirm the restore operation.
Please press any Key when restore is done.
Press any key to continue . . .
Going to reboot last time now ...
You can close all open command-prompts now!
After reboot all is done! Have fun!
Bin4ry
Press any key to continue . . .
It says that It's done and that all is done, but I think that because the mounting permission was denied that it wasn't able to root the device. If I could get some assistance on this from someone with more experience, I'd appreciate it. Does anyone know how to fix/root this device? I don't know if this will make a difference or not but it says the software is VS840PP2
Bump, anyone know anything?
I wish someone would
cecpuman said:
Bump, anyone know anything?
Click to expand...
Click to collapse
I wish someone would resolve this I see people all over the place bragging they have rooted their exceeds "showing proof" and no-one seems to give a crap that some people can't afford the most easily rooted phones and are forced to get the most workable less expensive phones. I have student loans and would have to pay a $400.00 deposit to be able to pay 150 dollars for a semi decent phone and my carrier won't allow me to use the phone I've had for a couple years that I rooted myself. I just want a viable answer to how do you root the exceed I know what I'm doing but I work for a living (making very little at that) and have a child to support so I can't devote a week to figuring it out and am frustrated that nobody seems to give a crap about anything but the new razr or the iphone (trendys).
Rooted mine
D3d10ck said:
I wish someone would resolve this I see people all over the place bragging they have rooted their exceeds "showing proof" and no-one seems to give a crap that some people can't afford the most easily rooted phones and are forced to get the most workable less expensive phones. I have student loans and would have to pay a $400.00 deposit to be able to pay 150 dollars for a semi decent phone and my carrier won't allow me to use the phone I've had for a couple years that I rooted myself. I just want a viable answer to how do you root the exceed I know what I'm doing but I work for a living (making very little at that) and have a child to support so I can't devote a week to figuring it out and am frustrated that nobody seems to give a crap about anything but the new razr or the iphone (trendys).
Click to expand...
Click to collapse
Yep, I just rooted my VS840PP, seems you need to use the Lg Spectrum root, but since I'm new I can't post links, but you will need the driver file "LG VZW_United_WHQL_v2.11.0.exe" and "LG_Spectrum_ICS.zip" (put these into a search engine)
Install Instructions
Download and unzip
Connect your phone to your PC
Make sure to have the LG USB drivers installed
Make sure to have debugging enabled
Make sure to have USB connectivity set to internet connection
Run the script for your OS (.bat for Windows, .sh for Linux)
Enjoy
I really did think it would make my phone not boot, but surprisingly it worked! EDIT 8-16-13 treat this phone like any other LG Lucid, which means you can go to CM 10 4.1 Jellybean on this phone.
scififan68 said:
Yep, I just rooted my VS840PP, seems you need to use the Lg Spectrum root, but since I'm new I can't post links, but you will need the driver file "LG VZW_United_WHQL_v2.11.0.exe" and "LG_Spectrum_ICS.zip" (put these into a search engine)
Install Instructions
Download and unzip
Connect your phone to your PC
Make sure to have the LG USB drivers installed
Make sure to have debugging enabled
Make sure to have USB connectivity set to internet connection
Run the script for your OS (.bat for Windows, .sh for Linux)
Enjoy
I really did think it would make my phone not boot, but surprisingly it worked! EDIT 8-16-13 treat this phone like any other LG Lucid, which means you can go to CM 10 4.1 Jellybean on this phone.
Click to expand...
Click to collapse
Big thanks.Any roms that work on our phone?
---------- Post added at 02:16 AM ---------- Previous post was at 02:01 AM ----------
Can you post instructions on how to flash CM10?
Do i do standard Lucid downgrade to GB procedure?
Thanks in advance.
lviv73 said:
Big thanks.Any roms that work on our phone?
Click to expand...
Click to collapse
Yeah one which is Android 4.1.2, the file is called "cm-10-20130424-UNOFFICIAL-vs840.zip", but you have to rollback to GB 2.3.6(due to locked ics bootloader), install root, CWM and finally install the CM 10 based LG Lucid beta rom. I see you edited your post and yes it is the standard LG Lucid Gingerbread downgrade method. The forum thread title is "[ROM][BETA] CyanogenMod 10 for the LG Lucid" and its on "androidforums.com" all info you need should be in that forum thread. I can tell you that Jellybean works very well on this phone, and I never want to go back to 4.0.4. :good: But of course there are some bugs, as it seems signal strength is lower, but I may have the wrong baseband for this phone.
how to flash clockworkmod
scififan68 said:
Yeah one which is Android 4.1.2, the file is called "cm-10-20130424-UNOFFICIAL-vs840.zip", but you have to rollback to GB 2.3.6(due to locked ics bootloader), install root, CWM and finally install the CM 10 based LG Lucid beta rom. I see you edited your post and yes it is the standard LG Lucid Gingerbread downgrade method. The forum thread title is "[ROM][BETA] CyanogenMod 10 for the LG Lucid" and its on "androidforums.com" all info you need should be in that forum thread. I can tell you that Jellybean works very well on this phone, and I never want to go back to 4.0.4. :good: But of course there are some bugs, as it seems signal strength is lower, but I may have the wrong baseband for this phone.
Click to expand...
Click to collapse
Ok i got it rolled back to gb, but it says i need a sim card and no wireless or 3g, i cant download the cwm unless i restore to ics. Im ecstatic that i got this far I rooted it rolled it forward
Installed rom manager and downloaded the restore but i cant run it without some sort of data connection. Thank you all for getting me this far but what do I do?
D3d10ck said:
Ok i got it rolled back to gb, but it says i need a sim card and no wireless or 3g, i cant download the cwm unless i restore to ics. Im ecstatic that i got this far I rooted it rolled it forward
Installed rom manager and downloaded the restore but i cant run it without some sort of data connection. Thank you all for getting me this far but what do I do?
Click to expand...
Click to collapse
You may have to install the baseband for the Exceed. I think in the CyanogenMod beta thread on AndroidForums there is a link but I'm not sure. Use ROM Manager to install CWM Recovery and then Flash CM10.
Vs840pp 4.1.2
D3d10ck said:
Ok i got it rolled back to gb, but it says i need a sim card and no wireless or 3g, i cant download the cwm unless i restore to ics. Im ecstatic that i got this far I rooted it rolled it forward
Installed rom manager and downloaded the restore but i cant run it without some sort of data connection. Thank you all for getting me this far but what do I do?
Click to expand...
Click to collapse
As long as you're rooted, search on the internet for "cwm installer for lucid" and follow the install instructions on gingerbread, then you want to flash the CWM touch recovery by searching for LGVS840_CWMT.zip and clicking on "CWM Touch Flashable Recovery for LG Lucid 4G - LG Cell Phones ..." Make sure you have the CWMT zip and LG Lucid CM 10.1 zip on your micro sd card. You then use rom manager to boot into recovery and flash the CWMT zip, then do a factory reset and clear caches and finally flash the LG Lucid CM 10.1 available on androidforums.
scififan68 said:
As long as you're rooted, search on the internet for "cwm installer for lucid" and follow the install instructions on gingerbread, then you want to flash the CWM touch recovery by searching for LGVS840_CWMT.zip and clicking on "CWM Touch Flashable Recovery for LG Lucid 4G - LG Cell Phones ..." Make sure you have the CWMT zip and LG Lucid CM 10.1 zip on your micro sd card. You then use rom manager to boot into recovery and flash the CWMT zip, then do a factory reset and clear caches and finally flash the LG Lucid CM 10.1 available on androidforums.
Click to expand...
Click to collapse
May I ask which firmware are you suppose to use to do a roll back? Can you just use the Lucid's firmware or does it have to be the Exceed firmware to work for the roll back?
ls5280 said:
May I ask which firmware are you suppose to use to do a roll back? Can you just use the Lucid's firmware or does it have to be the Exceed firmware to work for the roll back?
Click to expand...
Click to collapse
It's the stock gingerbread for the LG Lucid and you look for the method to install with LG's tool and you will need the file "VS840ZV6_06.S6_06.P58014.R5.cab" and look for how to roll back to gingerbread on the lg lucid to find out how to roll it back.
scififan68 said:
It's the stock gingerbread for the LG Lucid and you look for the method to install with LG's tool and you will need the file "VS840ZV6_06.S6_06.P58014.R5.cab" and look for how to roll back to gingerbread on the lg lucid to find out how to roll it back.
Click to expand...
Click to collapse
Thanks a bunch, I thought it would be okay to do that but just wanted to make sure before doing it.
Hmm, after restoring successfully, for some reason I cant get the Wi-Fi to work. I tried both versions the V5 and V6 in the dropbox posted on android forum. Can root and everything but unable to access any internet without wifi. Kinda stuck without CWM. Any clues?
Edited: Whoops, Haha, a Factory Reset fixed it.
Edited: Blah after being able to install Rom Manager and installing CWM "Successful" I still get into CWM recovery.
Edited: CWM solved but now I get the "Cant Mount Sd" in CWM. Trided both "fat and "extFAT" and no go. Any Help?
Edited: Finally! Bad SD card! CM 10 up and running! Woot!
ls5280 said:
Hmm, after restoring successfully, for some reason I cant get the Wi-Fi to work. I tried both versions the V5 and V6 in the dropbox posted on android forum. Can root and everything but unable to access any internet without wifi. Kinda stuck without CWM. Any clues?
Edited: Whoops, Haha, a Factory Reset fixed it.
Edited: Blah after being able to install Rom Manager and installing CWM "Successful" I still get into CWM recovery.
Edited: CWM solved but now I get the "Cant Mount Sd" in CWM. Trided both "fat and "extFAT" and no go. Any Help?
Edited: Finally! Bad SD card! CM 10 up and running! Woot!
Click to expand...
Click to collapse
Glad to see you got CM 10 on this phone, since it runs pretty good, the only issue I had is the way it handles low signal areas, which is why I upgraded to the LG Spectrum plus I wanted Verizon 4G LTE.
scififan68 said:
Yep, I just rooted my VS840PP, seems you need to use the Lg Spectrum root, but since I'm new I can't post links, but you will need the driver file "LG VZW_United_WHQL_v2.11.0.exe" and "LG_Spectrum_ICS.zip" (put these into a search engine)
Install Instructions
Download and unzip
Connect your phone to your PC
Make sure to have the LG USB drivers installed
Make sure to have debugging enabled
Make sure to have USB connectivity set to internet connection
Run the script for your OS (.bat for Windows, .sh for Linux)
Enjoy
I really did think it would make my phone not boot, but surprisingly it worked! EDIT 8-16-13 treat this phone like any other LG Lucid, which means you can go to CM 10 4.1 Jellybean on this phone.
Click to expand...
Click to collapse
I have tried this root and all I get is nothing, I am attaching what the root program says if anyone can help
kibbles-n-bits said:
I have tried this root and all I get is nothing, I am attaching what the root program says if anyone can help
Click to expand...
Click to collapse
I think I may have had the same issue and it turned out the root files didn't extract correctly the first time, so I deleted the root files and extracted them again and it worked. Of course I can't exactly remember it now, but its worth a try. EDIT: Wait no, it looks like root installed fine, are you on stock ICS or Gingerbread? As Gingerbread has special root tools that are different from ics, also make sure you have superSU installed and try the root checker from the playstore.
Will I be stuck in activation mode?
scififan68 said:
I think I may have had the same issue and it turned out the root files didn't extract correctly the first time, so I deleted the root files and extracted them again and it worked. Of course I can't exactly remember it now, but its worth a try. EDIT: Wait no, it looks like root installed fine, are you on stock ICS or Gingerbread? As Gingerbread has special root tools that are different from ics, also make sure you have superSU installed and try the root checker from the playstore.
Click to expand...
Click to collapse
New to the community and was hoping this was a good place for a related question. I have an exceed and I rooted without problem yesterday. I believe my SD Maid app deleted some important files or something because I stopped receiving incoming calls and texts. Anyway, I soft bricked my phone a few times and got the "Long time no see" message. I thought I unrooted my phone so I tried doing a hard reset thinking I would possibly fix the problem. That made matters worse. My soft brick became the only thing I could see no matter how many times I pulled the battery out and rebooted I was stuck at that screen. After hours of trying to get my pc to recognize my phone/get my phone in download mode, I finally fixed it and rooted again. Problem is that when I went through the unbrick process and flashed the kdz file to my phone, it was then stuck in activate mode. It wasnt a big deal because I just played dumb with verizon and they fixed it in their system being that when trying to activate it didnt give me the option to activate on my same plan/number. A bit annoying but better than nothing. My question is when I roll back to gingerbread or flash CM10 will I be stuck in activation mode again? Sorry for the long post, just figured I would give the what and why before my question!
derekpoole890 said:
New to the community and was hoping this was a good place for a related question. I have an exceed and I rooted without problem yesterday. I believe my SD Maid app deleted some important files or something because I stopped receiving incoming calls and texts. Anyway, I soft bricked my phone a few times and got the "Long time no see" message. I thought I unrooted my phone so I tried doing a hard reset thinking I would possibly fix the problem. That made matters worse. My soft brick became the only thing I could see no matter how many times I pulled the battery out and rebooted I was stuck at that screen. After hours of trying to get my pc to recognize my phone/get my phone in download mode, I finally fixed it and rooted again. Problem is that when I went through the unbrick process and flashed the kdz file to my phone, it was then stuck in activate mode. It wasnt a big deal because I just played dumb with verizon and they fixed it in their system being that when trying to activate it didnt give me the option to activate on my same plan/number. A bit annoying but better than nothing. My question is when I roll back to gingerbread or flash CM10 will I be stuck in activation mode again? Sorry for the long post, just figured I would give the what and why before my question!
Click to expand...
Click to collapse
You mean the activation screen, that you can quite easily bypass, also once it is is active it doesn't need to be activated again. Here is how to bypass activation https://www.youtube.com/watch?v=8WGKCdlnt1s
wow how did i miss that one!
scififan68 said:
You mean the activation screen, that you can quite easily bypass, also once it is is active it doesn't need to be activated again. Here is how to bypass activation
Thanks for the link. I apologize for not researching that better. CM 10 here i come!
Click to expand...
Click to collapse
I know this is an old post but I just snuck and rooted the girlfriends LG Lucid VS840ZV9 / 4.0.4 / software update version 6.3.0_B7
tonight using spectrum_root_windows
http://www.mediafire.com/download/on6cnik4h0fo697/spectrum_root_windows.zip

Stock Recovery Needed For ZTE Avail 2 (Z992 - AT&T)

I have a ZTE Avail 2 which I recently managed to root with Cydia Impactor. Afterwards I managed to screw it up by removing too many stock apps with Titanium. I did it carefully, one by one, and for a few days everything seemed to work fine. But then apps started force-closing, '<name of app here> has stopped working', etc. Factory reset doesnt help, it just restores me to the same screwed up state I'm in now. I already know why, it's because I removed some of the stock apps, which I now realize it needs. I'm currently stuck on the AT&T logo when powering on, it never gets any further. But even while it was messed up it was still halfway-operable, and now this. This device's subforum on Android Forums is all but non-existent, and XDA doesnt seem to have anything for it.
What I need is a 100% stock ROM (pre-rooted if possible) that I can flash, along with instructions on how to flash it. I have some experience flashing ASUS devices and Samsung devices, mainly the Transformer pad, and the Note 2, but have also rooted miscellaneous other devices in the past without alot of issues. But I have no experience with ZTE. I've already checked the manaufacturer's website for some kind of recovery software I can use to restore it, there doesnt seem to be anything.
Thanks for any help!
Stephen Wayne Hamilton said:
I have a ZTE Avail 2 which I recently managed to root with Cydia Impactor. Afterwards I managed to screw it up by removing too many stock apps with Titanium. I did it carefully, one by one, and for a few days everything seemed to work fine. But then apps started force-closing, '<name of app here> has stopped working', etc. Factory reset doesnt help, it just restores me to the same screwed up state I'm in now. I already know why, it's because I removed some of the stock apps, which I now realize it needs. I'm currently stuck on the AT&T logo when powering on, it never gets any further. But even while it was messed up it was still halfway-operable, and now this. This device's subforum on Android Forums is all but non-existent, and XDA doesnt seem to have anything for it.
What I need is a 100% stock ROM (pre-rooted if possible) that I can flash, along with instructions on how to flash it. I have some experience flashing ASUS devices and Samsung devices, mainly the Transformer pad, and the Note 2, but have also rooted miscellaneous other devices in the past without alot of issues. But I have no experience with ZTE. I've already checked the manaufacturer's website for some kind of recovery software I can use to restore it, there doesnt seem to be anything.
Thanks for any help!
Click to expand...
Click to collapse
Just out of curiosity you ever figure out a solution? I have the AIO branded version of it.
drago10029 said:
Just out of curiosity you ever figure out a solution? I have the AIO branded version of it.
Click to expand...
Click to collapse
If needed, I could back up my /system folder and send it to you.
Simba.7 said:
If needed, I could back up my /system folder and send it to you.
Click to expand...
Click to collapse
it's alright man. someone on android forums has already made a custom ROM. so the ball is rolling on out weak old device :laugh:
build.prop?
Simba.7 said:
If needed, I could back up my /system folder and send it to you.
Click to expand...
Click to collapse
did you ever get around to doing this? there is supposedly a stock image on androidforums but when I opened the Zip, all it had was the stock apps, no build.prop, which I think I blew away with xblast (xposed plugin). now I hang on the boot screen image. there is a stock Rom for the z993 our there, which I suppose I could use, because they are supposed to be the same phone, just different carriers... but then I need to get the at&t apn's and it is just a PITA. so if you could post /system backup or just a stock build.prop, that would be great!
(I'd post links to these rooms but I guess I'm too new of a member... I can provide them if needed.)
I'm way late on this, but just thought I'd post to say that I no longer have the device, and I was never able to fix it.In any case, I hope the rest of you guys get it fixed. It seemed to be a halfway decent phone, although a bit sluggish at times. But beyond that, with all the bloat removed, I'd say it ran pretty well for the duration of time that I had it (less than a month). I currently have a GNote 3 (T-Mobile) and a GNote Pro 12.2" now and it's just awesome, I'm really loving them.
Sorry, accidental double-post (can't figure out how to delete this post, the "Edit/Delete" button doesnt appear to have any option to entirely delete a post).
Just like "AnonVendetta83" messed up using Titanium.
Now desperately looking for Stock ROM or any working custom ROM to bring phone back to life.:crying:
alirezayami said:
Just like "AnonVendetta83" messed up using Titanium.
Now desperately looking for Stock ROM or any working custom ROM to bring phone back to life.:crying:
Click to expand...
Click to collapse
There is a working custom Rom for the z993 (identical hardware, different customized software for AIO, another cell provider). All you will need to do is change/update the data provider stuff so you can still use 3g and mms's. Plenty of info on this online on what needs to be changed.
You can get this Rom over at androidforums.com
http://androidforums.com/prelude-all-things-root/792279-zte-prelude-z993-stock-unrooted-rom-aio.html
There is also a cwm recovery there that works on this phone, and a partial /system backup by someone else for the z992... it is just apps and what not.
If they aren't available anymore, let me know and ill see if I still have them saved somewhere for you.
Sent from my KFTHWI using Tapatalk
AlexZap said:
There is a working custom Rom for the z993 (identical hardware, different customized software for AIO, another cell provider). All you will need to do is change/update the data provider stuff so you can still use 3g and mms's. Plenty of info on this online on what needs to be changed.
You can get this Rom over at androidforums.com
http://androidforums.com/prelude-all-things-root/792279-zte-prelude-z993-stock-unrooted-rom-aio.html
There is also a cwm recovery there that works on this phone, and a partial /system backup by someone else for the z992... it is just apps and what not.
If they aren't available anymore, let me know and ill see if I still have them saved somewhere for you.
Sent from my KFTHWI using Tapatalk
Click to expand...
Click to collapse
Thank you so very much Alex
I was wondering if I can just simply place the rom zip on the root of your sdcard and continue without doing "Install CWM - ZTE Prelude (Z993) Root&Recovery" step???
Honestly I have absolutely no idea how to do CWM steps as they come so complicated to me.
alirezayami said:
Thank you so very much Alex
I was wondering if I can just simply place the rom zip on the root of your sdcard and continue without doing "Install CWM - ZTE Prelude (Z993) Root&Recovery" step???
Honestly I have absolutely no idea how to do CWM steps as they come so complicated to me.
Click to expand...
Click to collapse
You need to install the custom recovery... It is the only way to install the zip file. If you just have the zip and go into the stock recovery I don't think you can select which zip to install
Sent from my N9002 using XDA Premium 4 mobile app
AlexZap said:
There is a working custom Rom for the z993 (identical hardware, different customized software for AIO, another cell provider). All you will need to do is change/update the data provider stuff so you can still use 3g and mms's. Plenty of info on this online on what needs to be changed.
You can get this Rom over at androidforums.com
http://androidforums.com/prelude-all-things-root/792279-zte-prelude-z993-stock-unrooted-rom-aio.html
There is also a cwm recovery there that works on this phone, and a partial /system backup by someone else for the z992... it is just apps and what not.
If they aren't available anymore, let me know and ill see if I still have them saved somewhere for you.
Sent from my KFTHWI using Tapatalk
Click to expand...
Click to collapse
AlexZap said:
You need to install the custom recovery... It is the only way to install the zip file. If you just have the zip and go into the stock recovery I don't think you can select which zip to install
Sent from my N9002 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thnx Alex
I would highly appreciate if anyone tell me what ADB Driver I should use for ZTE Z992. I almost understood all the procedure in the links but now the problem is despite I tried different ADB Drivers, but still ADB reboot-bootloader boots phone again in Normal bootloader.
Also Fastboot devices command does not see the phone, while ADB Devices command see it.
Seems bootloader is locked. Right? What should I do?
This is the method I used when I rooted my avail2 :
http://androidforums.com/zte-avail-2-zte-prelude/821217-how-root-zte-avail-2-z992-guide.html
The author (and I) just used the included drivers from zte that come with the phone. From what I remember, fastboot worked fine. Just hold the volume down button then turn the phone on. It will seem to lock on the start screen, but this is the bootloader. Then connect your cable and try your fastboot commands.
If you are already rooted, you can just download the package here
http://androidforums.com/prelude-all-things-root/797487-cwm-recovery-installer-zte-prelude.html
And skip the middle section, using the impactor to root (13 and 14).
Depending on what's wrong with your phone, you could also try just using the stock recovery and doing a system reset there. It will wipe any bad custom settings, but if the rom is still viable it might get you up and running again. It got me out of a bootloop without re-romming the whole thing. And with titanium backup or system app mover you can reinstall anything you need in the system partition.
*edit - Damn kindle auto correct
Sent from my KFTHWI using Tapatalk
A bit to much fiddling resulted in disaster
Hello XDA forum users,
I'm about ready to toss this phone in the trash. I have an AT&T Avail 2 with model number z992, which is apparently manufactured by a company called ZTE. First I think it would be helpful to explain what I've done to the phone and perhaps others out there can tell me if I've destroyed the phone or if it can be fixed.
A friend of mine sold me the phone for 10 bucks, its in great condition which is why its such a shame that it seems perma-bricked. I have no need for the phone aspect of the device, I simply wanted to "convert" it to a handheld media/application player, like an ipod or tablet for example. The phone comes with several bundled software applications that I find completely useless and wanted them removed, EX. AT&T Navigator and other AT&T software, plus a bunch of google applications.
The first thing I did when I decided to try and customize it was to use Kango's root tool which worked and rooted the phone. I was all excited that it worked and continued by installing the Super User application which allowed me to gain full control over the device. (I should have stopped there.) After the successful phone root I then installed a 3rd party app called NoBloat and used its uninstall options to remove a lot of stuff. I couldn't tell you exactly what all was removed but looking back, it must have been more important than I realized at the time. I know I took out all the AT&T software, then all the Google stuff to, which destroyed the play store. I didn't take out anything that seemed like a system file but apparently the Google stuff is the system files. The phone still worked in this state but it was erratic and things like Contacts would crash even if it was not running. So I considered that a failed attempt and commenced to do a factory reset using the recovery menu (Vol Up + Menu Key + Power button) but the factory reset didn't work, well not like it was supposed to. I had used the restore option before and it made the phone work like it was brand new. Now when the phone is powered on it will boot to the initial setup and ask me to choose a language, then it will get as far as the wireless connection screen (sometime not even that far) and the phone reports that "Unfortunately, Setup Wizard has stopped." and then I tap OK and the setup wizard restarts at the language screen. This is the state it is in now and I do not know how to fix it, I'm beginning to think there currently is no method to fix this.
Things I've tried so far include installing minimal ADB-Fastboot to try and sideload various ROM images, the ones I found here and other places. The phone is not recognized by Windows 7 though and the ADB does not work like it did on a motorola phone I did this to before. I've also purchased an inexpensive 8GB microSD chip with an adapter so I could put the ROM info on that and tried the "Update from external storage option" and that seems like it would work but none of the ROM's I've used will install. I guess because there is some kind of security feature built into the phones hardware which checks the data files for specific tags/sizes and therefore won't accept any of the ROMS I've tried.
There is no means to access the old file system anymore like most guides show, I do not have any CWM's installed nor any backup data whatsoever. It's been reset and now it seems the data it used to restore itself is, while not completely missing, damaged and will not reload anymore. All the guides I've read or watched usually show the user in the operating system or using software on a PC to type out commands. None of that works on this phone though, the phone as I just described it is basically bricked. Is there anything that can fix this, or is the phone a paper weight now? A functional ROM image from AT&T seems unlikely as they have absolutely no relevant information about this on the commercial website and the help and support seems like it's setup for old people who don't understand technology at all. If anyone out there has experience with issues like this then by all means let me know. If more information is necessary then I will be glad to provide it if available.
Alright I did manage to figure out how to make the computer see the phone as an ADB device and the minimal ADB interface shows the device now when I type ADB devices at the command prompt. Though this ADB thing seems irrelevant considering I can do the same thing by using the SD card adapter. So I don't know if this was useful or not. The ADB prompt shows a device number of P752A15.
Before I was unable to make the device show up at all in the ADB list. The problem now is how to make the phone accept a ROM, at this point I don't even care if the ROM is the default factory ROM or some random ROM made by a devoted user. The issue I encounter each time is that the built in recovery option to restore from an SD card will not accept the ROM's I've tried so far, and my research on this seems to indicate that I need a custom recovery option. This is apparently called the ClockWorkMod but as to how I install that without a functional operating system on the device is a mystery still. I've tried using a file called recovery.zip and but it does not show up when I view the contents of the SD card when the card is in the phone.
I feel like an idiot because I've done this to other phones for my family and friends, you know jailbreaking an iPhone, and rooted a Galaxy S3 once but this phone seems like its not going to be as easy as those others. I guess AT&T made sure that if you alter it, it breaks the phone. I'll check back later and see if anyone has dropped a line or two here in response to my inquiry.
Thank you and have good day.
Britton Burton said:
Alright I did manage to figure out how to make the computer see the phone as an ADB device and the minimal ADB interface shows the device now when I type ADB devices at the command prompt. Though this ADB thing seems irrelevant considering I can do the same thing by using the SD card adapter. So I don't know if this was useful or not. The ADB prompt shows a device number of P752A15.
Before I was unable to make the device show up at all in the ADB list. The problem now is how to make the phone accept a ROM, at this point I don't even care if the ROM is the default factory ROM or some random ROM made by a devoted user. The issue I encounter each time is that the built in recovery option to restore from an SD card will not accept the ROM's I've tried so far, and my research on this seems to indicate that I need a custom recovery option. This is apparently called the ClockWorkMod but as to how I install that without a functional operating system on the device is a mystery still. I've tried using a file called recovery.zip and but it does not show up when I view the contents of the SD card when the card is in the phone.
I feel like an idiot because I've done this to other phones for my family and friends, you know jailbreaking an iPhone, and rooted a Galaxy S3 once but this phone seems like its not going to be as easy as those others. I guess AT&T made sure that if you alter it, it breaks the phone. I'll check back later and see if anyone has dropped a line or two here in response to my inquiry.
Thank you and have good day.
Click to expand...
Click to collapse
Ok, been a while since I've used this phone, but hopefully this will help. I assume you have the kaw202_recoveryflasher.zip file. Once you extract it, look for the .img file. Try running these adb commands
adb.exe push cwm-z993.img /cache
adb.exe shell "su -c 'dd if=/cache/cwm-z993.img of=/dev/block/mmcblk0p17'
This should flash cwm if your phone is rooted and adb shell is working.
Sent from my KFTHWI using XDA Premium 4 mobile app
AlexZap said:
Ok, been a while since I've used this phone, but hopefully this will help. I assume you have the kaw202_recoveryflasher.zip file. Once you extract it, look for the .img file. Try running these adb commandsp
Click to expand...
Click to collapse
I have not come across that particular file yet, I did try to google it and the only results it had were two and one of those was this post. Would you mind telling me where I might find a copy of the kaw202_recoverflasher.zip?
I managed to find the zip you were talking about and have downloaded it, for anyone else looking for it. I am unable to post links but I would have linked to the files you mentioned. For others looking for the same zip file search for "CWM Recovery Installer ZTE PRELUDE". That's the title of the thread I found the file on that Alex mentioned above. The instructions on the page don't seem like they apply to the situation I'm stuck in but I'll give it a whirl anyway and see if the files work.
If this forum is like the others I've read through so far then there is no real answer to the issue. The phone seems kind of new and not many of the power users on these forums use rinky dink phones like this one. You guys all have the 600 dollar models I guess. What bugs me about this this phone and the state I managed to put it in, is that the damn thing was programmed the first time when it was made. So it seems to me like there should be a way to reprogram the phone the same way the factory did it. Think about it, when they make the phones they don't have any information on the phone at all. It's completely empty, so there must be a way to load the software for the phone even if the phone has no data at all in the main storage. If the files in the recovery flasher.zip file work then I'll post back the results but if it's like the other files I've messed around with (which didn't do anything) then I'm throwing it in the trash can.
Anyway thanks for your response and for pointing me in a different direction Alex
---------- Post added at 09:15 PM ---------- Previous post was at 08:39 PM ----------
HELL YEAH!!! It worked thank you Alex, ​
I would have never figured this out without your help! The phone now has a version of CWM on it and the recovery menu is different. I just tried to install a ROM and it said successful. After the phone rebooted went back to the setup screen from ZTE but it still did the same thing. However this is progress and I should be able to "wander in the dark" and figure out a way to use the CWM to install a completely new rom. Any recommendations on a ROM to use for the z992?
Good news, I was able to fix it using the information Alex guided me to find. Since there doesn't appear to be a stock AT&T version of the ROM I ended up using the Azazel ROM. Which at first failed even though it was installed, this I determined was due to the old ROM image still being partially active on the system partition. So I formatted the system partition to and tried again. This time it worked and the phone seems fully functional again, and best of all the annoying bloatware is not present and the apps are not crashing. I consider this issue resolved. Thank you again Alex I will be sure to leave a thanks on your post.
Britton Burton said:
Good news, I was able to fix it using the information Alex guided me to find. Since there doesn't appear to be a stock AT&T version of the ROM I ended up using the Azazel ROM. Which at first failed even though it was installed, this I determined was due to the old ROM image still being partially active on the system partition. So I formatted the system partition to and tried again. This time it worked and the phone seems fully functional again, and best of all the annoying bloatware is not present and the apps are not crashing. I consider this issue resolved. Thank you again Alex I will be sure to leave a thanks on your post.
Click to expand...
Click to collapse
ze
Glad I could help, but none of the work was done by me, the guys over at android central did all the heavy lifting, I just pointed you in the right direction. I have a stock system e m image around here somewhere if you need it, tho installation will be a bit more complicated. If azazels rom ever gives you issues, ill dig it up and try and help you install it.
Sent from my KFTHWI using XDA Premium 4 mobile app

[Q] ZTE Midnight root?

So I have the ZTE Midnight (Z768G) and I am getting the classic "low on space" message and I know what rooting is as I rooted my Nook Tablet 4GB but I can't seem to find a root that will work for my phone so that I can set my default storage to the SD card and I was wondering if someone could help me. Or if there's alternatives to rooting it that would also be nice. I installed an app that can erase cache but it's not doing much for me right now. I can't even update my apps. Any help would be nice!!
-Luciano
Root ZTE Midnight using kingo root - works!
lucianodiaz5 said:
So I have the ZTE Midnight (Z768G) and I am getting the classic "low on space" message and I know what rooting is as I rooted my Nook Tablet 4GB but I can't seem to find a root that will work for my phone so that I can set my default storage to the SD card and I was wondering if someone could help me. Or if there's alternatives to rooting it that would also be nice. I installed an app that can erase cache but it's not doing much for me right now. I can't even update my apps. Any help would be nice!!
-Luciano
Click to expand...
Click to collapse
went to kingoapp.com and downloaded and ran the app against my ZTE Midnight from Net10 - I now have root access. I did not buy the phone to make calls - the $20 price tag for an Android test platform was too goo to pass up.
covergeek said:
went to kingoapp.com and downloaded and ran the app against my ZTE Midnight from Net10 - I now have root access. I did not buy the phone to make calls - the $20 price tag for an Android test platform was too goo to pass up.
Click to expand...
Click to collapse
It worked but now I can't move the apps over to the SD card like I wanted to. I tried doing the /System app mover method of turning system apps to normal apps and uninstalling but it's still giving me that message.
Find the posts dealing with zte and link2sd. I am able to now install anything without space worries
Sent from my Z768G using xda app-developers app
Question:
After Rooting, can anyone install CWM & Install Custom ROM?
I'm looking to Root, Install CWM, then Install Custom ROM for Android v4.0 or higher.
Anyone successfully Rooted & Updated to Android v4.0 or higher.
Please advise. Thank you!
*** UPDATE: Kingo Android ROOT = ROOTED my (NET10) ZTE Z768G ***
*** LOOKING: Custom Recovery & Custom ROM (Android v4.0 or higher) **** Anyone ???
dtkool said:
Question:
After Rooting, can anyone install CWM & Install Custom ROM?
I'm looking to Root, Install CWM, then Install Custom ROM for Android v4.0 or higher.
Anyone successfully Rooted & Updated to Android v4.0 or higher.
Please advise. Thank you!
*** UPDATE: Kingo Android ROOT = ROOTED my (NET10) ZTE Z768G ***
*** LOOKING: Custom Recovery & Custom ROM (Android v4.0 or higher) **** Anyone ???
Click to expand...
Click to collapse
What drivers did you use to get Kingo Android Root to work? Nothing seems to be working for me...
ZTE Midnight!!!! No luck
I am having no luck with root.... tried all
How?
covergeek said:
went to kingoapp.com and downloaded and ran the app against my ZTE Midnight from Net10 - I now have root access. I did not buy the phone to make calls - the $20 price tag for an Android test platform was too goo to pass up.
Click to expand...
Click to collapse
How did you get kingoroot to run? I get stuck at "Installing Drivers" forever. I've tried installing my own drivers, both the included ones from the phone's internal memory as well as the latest ones from ZTE, and the ZTE ones that kingoroot points me to in the troubleshooting section. I'm running Win8 and I've also tried disabling Signed Driver Verification. What is the magic spell to get this thing to run? I agree $20 is *****in if I can just get the thing rooted so I can install more than 1 app and *cough* turn on tethering
jawa6988 said:
How did you get kingoroot to run? I get stuck at "Installing Drivers" forever. I've tried installing my own drivers, both the included ones from the phone's internal memory as well as the latest ones from ZTE, and the ZTE ones that kingoroot points me to in the troubleshooting section. I'm running Win8 and I've also tried disabling Signed Driver Verification. What is the magic spell to get this thing to run? I agree $20 is *****in if I can just get the thing rooted so I can install more than 1 app and *cough* turn on tethering
Click to expand...
Click to collapse
Haha that's the point right xD $20 hot spot! But I agree. Nothing seems to be working ATM... Too much bloatware and need to get started on a CM nightly...
Right
wireproof said:
Haha that's the point right xD $20 hot spot! But I agree. Nothing seems to be working ATM... Too much bloatware and need to get started on a CM nightly...
Click to expand...
Click to collapse
Seriously, I left it sitting all night to see if it would ever start to download. The help section says that it's stalling on Driver Verification and to disablle it, but it makes no difference. I have trouble believing that's the problem since it won't even download the driver, how can it even try to "verify" it. Besides that fact that I have the latest driver from the manufacturer and have tried the one from the link in their help pages to the ZTE driver. Is there no command line option to skip the driver installation and just see if it will run? I know i can access it by adb. OR does anyone know of a method to root this thing manually? I'm not skeered to use terminal and dox boxes, but I'd rather not do it blind. THis phone is nearly useless to me without root especialy since i just figured out why I get no signal... It's a damn T-Mobile based device. It's doesn't say this ANYWHERE on the box or documentation. I should have researched it first as I usually do, but I got too excited by the idea of a droid for $20. I thought, at least if it doesn't work, it will be a toy for my 5 year old... But even he will want to install more than 1 teeny app LOL
With a custom 4.2 or later rom and good signal this thing would be.... OK... not great, but not too bad either. It isn't all that slow as I was afraid. Kit Kat might be great on it
Will a root method from any other ZTE devices work for the Midnight? I read that it might possible be the same as the ZTE Concord from t-mobile, but I tried a root method for it using a jcase update.zip, but it did not work. I'm at a loss. I've never had this much trouble getting one rooted. Apparently this device just wasn't popular enough
jawa6988 said:
Seriously, I left it sitting all night to see if it would ever start to download. The help section says that it's stalling on Driver Verification and to disablle it, but it makes no difference. I have trouble believing that's the problem since it won't even download the driver, how can it even try to "verify" it. Besides that fact that I have the latest driver from the manufacturer and have tried the one from the link in their help pages to the ZTE driver. Is there no command line option to skip the driver installation and just see if it will run? I know i can access it by adb. OR does anyone know of a method to root this thing manually? I'm not skeered to use terminal and dox boxes, but I'd rather not do it blind. THis phone is nearly useless to me without root especialy since i just figured out why I get no signal... It's a damn T-Mobile based device. It's doesn't say this ANYWHERE on the box or documentation. I should have researched it first as I usually do, but I got too excited by the idea of a droid for $20. I thought, at least if it doesn't work, it will be a toy for my 5 year old... But even he will want to install more than 1 teeny app LOL
With a custom 4.2 or later rom and good signal this thing would be.... OK... not great, but not too bad either. It isn't all that slow as I was afraid. Kit Kat might be great on it
Will a root method from any other ZTE devices work for the Midnight? I read that it might possible be the same as the ZTE Concord from t-mobile, but I tried a root method for it using a jcase update.zip, but it did not work. I'm at a loss. I've never had this much trouble getting one rooted. Apparently this device just wasn't popular enough
Click to expand...
Click to collapse
I tried the root method for the T-Mobile branded version of the phone... I have the NET10 GSM version.. Nothing seems to be working either. Not even Gingerbreak... This is a freaking NET10 phone... And Kit Kat would be nice on this phone! 800 mhz processor and 512MB RAM so it should work well.
I just bought this phone too. It comes with CM 2.3.7 installed on it. I"m wanting a KitKat ROM. I'm hoping my by Wambo_Bomb will compile a version of his BlakAndroid for the ZTE Midnight. I've asked him to do so. He said he needs the modules an Kernel info to do it. If he does come through for me, I will share with everyone.
ROOTED!!!
I just wanted to come back and let you guys know: After A few days and much frustration, I tried Kingoapp.com again and it worked flawlessly on the first try, so now I'm rooted and able to run root apps on my rooted stock rom. Now does anyone know of a way to get a custom recovery on this phone? And if there are any cutom roms available yet? If your friend does compile a rom, I'd be happy to help with testing.
---------- Post added at 10:34 AM ---------- Previous post was at 10:29 AM ----------
Sleepycloud said:
I just bought this phone too. It comes with CM 2.3.7 installed on it. I"m wanting a KitKat ROM. I'm hoping my by Wambo_Bomb will compile a version of his BlakAndroid for the ZTE Midnight. I've asked him to do so. He said he needs the modules an Kernel info to do it. If he does come through for me, I will share with everyone.
Click to expand...
Click to collapse
Mine is now rooted, so let me know if you need me to dig out any files and send them to you. I can't make a full nandroid yet, but I can get in there with FTP or adb and hopefully get anything you need
---------- Post added at 10:51 AM ---------- Previous post was at 10:34 AM ----------
wireproof said:
What drivers did you use to get Kingo Android Root to work? Nothing seems to be working for me...
Click to expand...
Click to collapse
Try Kingoapp again. The server issue appears to be fixed. I did try from a fresh clean install of Win8, but I had tried that before and it stalled at installing drivers, so maybe had nothing to do with it. I simply connected the phone, installed drivers from internal memory (appeared as "CD-ROM in Win8), enabled development mode, then ran Kingoapp and it worked flawlessly. Good luck. The more people we get rooted, the better the custom ROMS will become I hope
GOT ROOT!!! cool thanks. now what... no roms yet?
sorry to steal the thread but does anyone know how to unlock sim for tmobile.
I was able to root the zte midnight using kingo root. So now Im looking for cwm and a custom rom for this phone. Does anyone know if any are out for this phone?
ultravioletnanokitty started a developers thread but i cant post on there to motivate them...
http://forum.xda-developers.com/showthread.php?t=2715570
I need a custom recovery for this phone, i will donate 50 USD if somebody help me to convert z768g to v768. So i could be able to Unlock it. Please help.
zte miniget10 phones root
ok I was having same problems do this plug device to pc go to thispc or my computer click on your phone and it will install right drivers and use kingo and your done figured th out 20mins into trying to root I bought this device just todo this to fiue out for have a nice day
---------- Post added at 10:01 PM ---------- Previous post was at 09:44 PM ----------
datboirobbie said:
ok I was having same problems do this plug device to pc go to thispc or my computer click on your phone and it will install right drivers and use kingo and your done figured th out 20mins into trying to root I bought this device just todo this to fiue out for have a nice day
Click to expand...
Click to collapse
sorry misspelled it zte midnight
ZTE midnight root???
has anyone ever found a root for zte z828tl??
What version of kingo?

Please help to obtain Root for ZTE N9515 (Boost ZTE Warp Sync)

I apologize if this is in the wrong section or been answered before, I looked and found nothing. I didn't want to spend the money for an expensive phone from the popular brands but wanted something decent. I came across the warp sync 2GB Ram, Quad Core ,5" HD Screen, 8mp camera and Sprints new Enchanced LTE speeds I get over 45 Megs anytime of the day all under $180. I love the phone but I just can't find a root guide for it.
It seems to never been rooted, the bootloader comes unlocked but has a secure boot image. From what I seen online that seems to be the reason why it can't be rooted. Is there a way work around? or a way to make a insecure img? I have tried every auto root from device/pc method. Source Kernel can be found here http://opensource.ztedevice.com/
ZTE N9515(Warp Sync on boost)
OS: 4.4.2
There you go try following the procedure available over here HexaMob see if that can be of any use !
promo87 said:
There you go try following the procedure available over here HexaMob see if that can be of any use !
Click to expand...
Click to collapse
Already tried both methods listed on the site resulting in each one failing, I've also found more people with this phone having the same issue also claiming to have tried all methods. Is there a way to make the boot image unsecure? I found one website stating that since the bootloader comes unlocked that a method to try would be to install a custom recovery then flash the SU to root. But I can't find a custom recovery for this phone anywhere, is it possible to use a customer recovery from a different phone on this one? sorry if that's a stupid question.
blingdogg said:
Already tried both methods listed on the site resulting in each one failing, I've also found more people with this phone having the same issue also claiming to have tried all methods. Is there a way to make the boot image unsecure? I found one website stating that since the bootloader comes unlocked that a method to try would be to install a custom recovery then flash the SU to root. But I can't find a custom recovery for this phone anywhere, is it possible to use a customer recovery from a different phone on this one? sorry if that's a stupid question.
Click to expand...
Click to collapse
Well, that's weird ! I haven't tried that one out at all so can't tell I ran down a good search inorder to came up with something which would help you out with this ! Anyway better option would be waiting a bit more while and see if other members over XDA has something to talk about this one !
promo87 said:
Well, that's weird ! I haven't tried that one out at all so can't tell I ran down a good search inorder to came up with something which would help you out with this ! Anyway better option would be waiting a bit more while and see if other members over XDA has something to talk about this one !
Click to expand...
Click to collapse
Looks like that's what I'll have to do
Appreciate you taking the time to reply, thanks for the help!
Sent from my N9515
blingdogg said:
Looks like that's what I'll have to do
Appreciate you taking the time to reply, thanks for the help!
Sent from my N9515
Click to expand...
Click to collapse
i have the same problem if you found something please let me know thanks
Having issues trying to root my zte warp sync (n9515) from boost mobile
xGMLO2Xx said:
i have the same problem if you found something please let me know thanks
Click to expand...
Click to collapse
This is my first phone that I have had from boost, I usually have had AT&T phones or Cricket and I have had not trouble with rooting!!, I have never had this much trouble with phones and rooting!!, I usually root every phone I get, but apparently I have chosen the wrong company and phone!!.. I myself had tried every way out there possible and I can't figure out a way that works!!
Please Please if anyone finds a way to root this (as for now a piece of crap) phone then please let me know, I guess for now I shall wait!
Thanks,
Rooting Phene
Wont some great devs get us root and recovery asap!!! Take a vote now
Sent from my N9515 using Tapatalk
ZTE Warp Sync
blingdogg said:
Already tried both methods listed on the site resulting in each one failing, I've also found more people with this phone having the same issue also claiming to have tried all methods. Is there a way to make the boot image unsecure? I found one website stating that since the bootloader comes unlocked that a method to try would be to install a custom recovery then flash the SU to root. But I can't find a custom recovery for this phone anywhere, is it possible to use a customer recovery from a different phone on this one? sorry if that's a stupid question.
Click to expand...
Click to collapse
I don't know if you still got this phone and trying to root it but if so you might wanna go to zte warp sync all things root site there's a bunch of ppl including myself trying to root it, anyway you said the bootloader is unlocked but for what i understand it is locked based on this site posts nobody is been able to get it on fastboot so if you can check it out thanks.
Is there any news on zte warp sync root
I just bought this phone today... I really like it... I'll be keeping my ears open
I sent a msg to ZTE about the boot loader... This is their response.
“ As of right now, we can not provide an unlocked bootloader. This may be something available in the future depending on the carrier's request for the design changes for the phones.
Thanks!” [emoji36]
Sent from my N9515 using Tapatalk
There must be a way to root this phone. Everybody lock heads. We can do it !!!
Sent from my N9515 using Tapatalk
A copy and paste I wrote on android forums....someone here might take a look.
I am looking at some stuff now. I can't download the files at the moment due to slow internet. But we can get into Download Mode by holding down both volume buttons and turning the phone on. I am wondering if we can use something like this. https://sites.google.com/site/zteopenfirmware/download-mode you can flash various files in download mode. Or something like this. http://forum.xda-developers.com/showthread.php?t=2163493 (Method 5 : ZTE Firmware Flasher) , I think low level access through download mode or FTM is the key. If or when we can get a recovery on this phone, from what I read it will replace FTM
The NanDL for firefox does connect to our phone and a guy named SuperR modified the boot.img.
It look like some work is being done on the ZTE Zmax that has the same problem as ours. Hopefully it will work.
This is my third ZTE smartphone ...the other two was a pleasure and a good learning experience to root. I am not tech savvy enough to root any phone without instructions. So I join the rank with the other that wait.[emoji17]
so you guys still haven't figured it out?
Zte zmax achieved root, might try kingroot to get tmp root, from there you will be on your own, bit it might work
Sent from my Z970
[email protected]:/ # id
uid=0(root) gid=0(root) context=u:r:init:s0
http://forum.xda-developers.com/android/apps-games/one-click-root-tool-android-2-x-5-0-t3107461 this works!!!
Have you tried this ?
Download the Rootgenius,search from google and install in your pc and connect your phone,be sure that usb debugging is on when you are connecting your phone to pc.One thing is that you have working internet connection on your pc because this root software download some usb driver file of few mb.You root your mobile in less than three minutes.
blingdogg said:
I apologize if this is in the wrong section or been answered before, I looked and found nothing. I didn't want to spend the money for an expensive phone from the popular brands but wanted something decent. I came across the warp sync 2GB Ram, Quad Core ,5" HD Screen, 8mp camera and Sprints new Enchanced LTE speeds I get over 45 Megs anytime of the day all under $180. I love the phone but I just can't find a root guide for it.
It seems to never been rooted, the bootloader comes unlocked but has a secure boot image. From what I seen online that seems to be the reason why it can't be rooted. Is there a way work around? or a way to make a insecure img? I have tried every auto root from device/pc method. Source Kernel can be found here http://opensource.ztedevice.com/
ZTE N9515(Warp Sync on boost)
OS: 4.4.2
Click to expand...
Click to collapse

Categories

Resources