Related
**Solved!!!**
Uploaded correct files to megaupload - http://www.megaupload.com/?d=I204KSNF
OUT OF THE BOX FRESH FEELING FOR YOUR XV6800!
Radio: 1.30.60
Rom: 2.09.605.8
Rom Date: 08/03/07
full restore of all original settings!
nuguys solution said:
Be connected to activestink.
(even if your device only boots to the windows splash screen activestink can still connect enough to load this 1.2 bootloader)
Run TitanUnlocker.exe from first folder
FOLOW THE ON SCREEN DIRECTIONS EXACTLY
INCLUDING THE UNPLUGING AND PLUGING BACK IN PART
Be patient and be sure that it is complete.
Then without disconecting, or restarting your device
go to the second directory and folow these directions...
While stil in bootloader mode run ROMUpdateUtility.exe
Follow the onsreen directions.
When your device boots up - LET THE VERIZON CUSTOMIZATIONS RUN.
Enjoy being back on Verizons service.
Now go load whatever roms you feel comfortable running.....
You may need a different bootloader for some roms.
Click to expand...
Click to collapse
I let the customizations run after loading the SPRINT 3.35 Rom updater on my XC6800, I don't think the problem was loading the rom, but letting the damned sprint customizations install instead of a quick reset.
*
I have tried a hell of a lot to resolve this and am convinced that at this point it is going to take a verizon stock rom - the whole thing - to start from scratch and get back from the evil grips of those sprint towers (you sprinters would think the same if in our shoes)...
*
Unfortunately I have not found everything to piece together an entire orig vz rom.
*
The first bad thing that the sprint customizations does is resets the MSL, so now instead of using 000000 as always, you have to find "GetSPC", run it giving it your ESN (under battery) to find out your new "sprintized MSL". This causes you to use sprints towers for everything, add to the fact that it loads a sprint PRL and you are now "stuck on sprint".* when you dial *228 you get a sprint recorded voice that this number is not valid.
Having a xv6700 laying around I was able to set nearly everything in EPST back to where it needed to be (see screen shots)- that got me making calls (roaming) but no i-net, and no *228...
*
Called Data tech support for a aKey, they gave it to me, that didn't work.
*
Dl'ed a vz PRL from http://www.corolada.com/prl/
That got me to be able to connect to vz by dialing *228, but no love, it says "sorry call cust serv...".
*
Went to a corp VZ store and looked at all the settings in EPST changed a couple more, that didn't work.
*
Spoke to the lead geek in charge there and fessed up, he said that it was because of the MSL code change, that *228 sends the 000000 “service sub lock code” to unlock the SPL (EPST) and if the code is different, it will never connect to *228 right (well maybe after they open up their network more, but that is at least months away).* So I said what if I was with sprint and wanted to "convert"? He said they would need sprint to set the MSL to 000000, which would likely be done by sending it in to sprint, then sprint sending it to HTC (I'm sure we can come up w/ something better).
*
After leaving, I received a follow up call from my escalated trouble ticket, and the girl reset my “DMU keys” that finally got me to have i-net (still no *228 love though).
*
So now I am at a OK place, everything works but still roaming, place and receive calls, received network texts from cust serv, and have i-net. However I didn’t want to go through all the set up on my phone just to hard reset anyway so I started off on a quest to find a legit vzw rom.
People keep saying it's posted here, or there or everywhere, I HAVE TRIED everyone I have found and have NOT been able to reset the radio to Verizons peramaters.
Any help out there as to finding the STOCK VERIZON RADIO or best the whole stock verizon rom package?
for those who need help getting the EPST setup I will post the current settings I am using in screenshots.
** I will update this post to reflect the best solution if the thread gets cumbersome.
I used the stock Verizon ROM at:
ftp://up.ppcgeeks.com/Titan/CarrierRoms/Verizon_Stock_ROM/VZW_Passworded_Ruu_signed
I had a similar type issue and I'm working fine now. You'll see a solved post from me with a GPS issue. Hope that helps.
starting to agregate info
starting to agregate info:
Geckotek said:
Here is a repost of my earlier posting on this subject. This will resolve your issues if your Verizon phone has been "Sprintized" or help you restore your phone before returning it to Verizon.
To set your phone back to the default Verizon ROM, do the following:
Download all necessary files 1) Titan Re-locker 2) Stock Verizon ROM 3) ROM Update Utility
Unzip/rar the Stock ROM and the RUU (unrar using WinRAR) ****DO NOT UNZIP THE RELOCKER**** (it is a self extracting zip and will run properly as is)
Place the Ruu_signed.nbh file in the RUU folder
Hard reset your phone by holding down both softkeys, hitting reset, and pressing R (just for good measure)
Connect your phone to your PC and make sure ActiveSync is connected
Re-lock your phone by running Titan_Relocker.exe
Place the stock Verizon ROM in the RUU folder
Run the RUU by running ROMUpdateUtility.exe
For good measure, let the Verizon ROM complete its setup.
I'm doing this from memory so please let me know if I missed a step so that I can update this post.
I hope this is helpful.
Edit: links corrected
Click to expand...
Click to collapse
Geckotek said:
xv6800
Was running 2.3.2 w/ the 3.27 radio. Just updated.
Here were my steps:
Performed hard reset
Connected phone to PC and made sure AS was connected
Ran the Sprint updater
Upon reboot I forced phone into bootloader mode (did this while HTC screen was beginning to appear)
Cooked ROM in DCDs Kitchen...added several options
Ran updater
Notes:
Never had to run *228. Phone and internet confirmed to work correctly. Syncing w/ AS right now, configuring Exchange AS.
Will report back more later, but so far so good.
Click to expand...
Click to collapse
ebb said:
(coming from DCD 1.70 and radio 2.13)
1. Load Olipro 1.20 unlocker (my phone was re-locked after 1.70 ROM)
2. Flash radio
--Reboot was stuck on verizon screen after radio- entered bootloader mode by pressing power+camera, and inserting stylus for reboot. Entered bootloader successfully.
3. Cooked verizon-based rom from DCD 3.0.0 kitchen
4. Flashed ROM
This brought me to the new radio and rom, BUT... when disconected from the desktop, entered the dreaded constant reboot situation, so...
5. Reattached to desktop- this stopped the rebooting. Established activesync.
6. Loaded Olipro 2.40
7. Removed connection from desktop. Removed battery and after reinsert, hard reset device.
8. Ran *228,1 and then *228, 2. Soft reset after each
9. Working great for phone and text. Will play with GPS and report back (yes-- I will enable Location On!)
Thanks DCD for your great work and suggestions along the way here and in the radio thread..
Click to expand...
Click to collapse
Geckotek said:
So to summarize your steps minus the failure follow my directions but if you don't have Olipro 2.4 installed already, do that first. OH, and I didn't need to run *228.
My data speed didn't test so well...gonna see if running a *228 helps.
Edit: HA! As I expected...running *228 jacks me up again. Looking for signal. *22802 kicks it back into signal.....looking into it some more.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=376873
Geckotek said:
http://forum.xda-developers.com/showthread.php?t=376873
Click to expand...
Click to collapse
your solution is finaly correct - I am uploading the needed files to megaupload so ftp issues don't keep causing problems for people.
I am stuck at the verizon white splash screen and I am trying to get my phone back to stock. I can not establish a connection to my PC via active sync. It there a way to get my phone connected, or is my phone Brick'd now?
Thanks
mcgong said:
I am stuck at the verizon white splash screen and I am trying to get my phone back to stock. I can not establish a connection to my PC via active sync. It there a way to get my phone connected, or is my phone Brick'd now?
Thanks
Click to expand...
Click to collapse
Press camera+power+soft reset
This will take you to the boot screen and you should be able to continue. You should have relocked your bootloader, right?
If so, just go ahead and flash the stock rom.
EDIT: Dont panic. If you are at the Verizon screen your phone is definitely NOT bricked. There are HUNDREDS of cases exactly like your and HUNDREDS more posts telling your exactly how to fix your problem. Search and you shall find.
Even before you actualy get into WinMo even though activestink is not really connected - it is able to connect through and re-flash the bootloader - it took a while to figure that one out for me too...
mcgong said:
I am stuck at the verizon white splash screen and I am trying to get my phone back to stock. I can not establish a connection to my PC via active sync. It there a way to get my phone connected, or is my phone Brick'd now?
Thanks
Click to expand...
Click to collapse
The moral of the story is, don't let Sprint customization run!
I did and had heck for 2 days. After flashing and re-flashing. i finally got back to original vzw rom, but data still didn't work, even after talking with tech support.
I took my phone to a local vzw store and they were able to fix it.
30 minutes later, I had the dcd3.01 rom installed and everything working perfectly.
Next big rom update, I will wait for others to screw up before jumping in.
....
plz up date the wiki with this
I did that same thing a month ago. Ran the damn Sprint Radio/Rom package and was stuck on Sprint towers. Even going back to the stock Verizon rom didn't help. I manually loaded a PRL and finally had phone calls, but no data. After many hours on the phone with Verizon giving me AKEYs, refresing towers, releasing stuck data sessions.... They finally sent me a replacement phone. Nice to see this issue has finally been resolved.
vx6800 bricked
I am new here but I need some help.
I have read and reread all the various posts but cannot get past the splash screen. During startup, at the bottom it, i get R 1.30.60 and D 3.35. It appears my problem is mismatched ROM and Radio version. However, trying to get back to stock rom, my device is not even detected by activesync and no matter what I do, I end up getting error - device not connected.
Thanks
benji
nuguy said:
**Solved!!!**
Uploaded correct files to megaupload - http://www.megaupload.com/?d=I204KSNF
OUT OF THE BOX FRESH FEELING FOR YOUR XV6800!
Radio: 1.30.60
Rom: 2.09.605.8
Rom Date: 08/03/07
full restore of all original settings!
I let the customizations run after loading the SPRINT 3.35 Rom updater on my XC6800, I don't think the problem was loading the rom, but letting the damned sprint customizations install instead of a quick reset.
*
I have tried a hell of a lot to resolve this and am convinced that at this point it is going to take a verizon stock rom - the whole thing - to start from scratch and get back from the evil grips of those sprint towers (you sprinters would think the same if in our shoes)...
*
Unfortunately I have not found everything to piece together an entire orig vz rom.
*
The first bad thing that the sprint customizations does is resets the MSL, so now instead of using 000000 as always, you have to find "GetSPC", run it giving it your ESN (under battery) to find out your new "sprintized MSL". This causes you to use sprints towers for everything, add to the fact that it loads a sprint PRL and you are now "stuck on sprint".* when you dial *228 you get a sprint recorded voice that this number is not valid.
Having a xv6700 laying around I was able to set nearly everything in EPST back to where it needed to be (see screen shots)- that got me making calls (roaming) but no i-net, and no *228...
*
Called Data tech support for a aKey, they gave it to me, that didn't work.
*
Dl'ed a vz PRL from http://www.corolada.com/prl/
That got me to be able to connect to vz by dialing *228, but no love, it says "sorry call cust serv...".
*
Went to a corp VZ store and looked at all the settings in EPST changed a couple more, that didn't work.
*
Spoke to the lead geek in charge there and fessed up, he said that it was because of the MSL code change, that *228 sends the 000000 “service sub lock code” to unlock the SPL (EPST) and if the code is different, it will never connect to *228 right (well maybe after they open up their network more, but that is at least months away).* So I said what if I was with sprint and wanted to "convert"? He said they would need sprint to set the MSL to 000000, which would likely be done by sending it in to sprint, then sprint sending it to HTC (I'm sure we can come up w/ something better).
*
After leaving, I received a follow up call from my escalated trouble ticket, and the girl reset my “DMU keys” that finally got me to have i-net (still no *228 love though).
*
So now I am at a OK place, everything works but still roaming, place and receive calls, received network texts from cust serv, and have i-net. However I didn’t want to go through all the set up on my phone just to hard reset anyway so I started off on a quest to find a legit vzw rom.
People keep saying it's posted here, or there or everywhere, I HAVE TRIED everyone I have found and have NOT been able to reset the radio to Verizons peramaters.
Any help out there as to finding the STOCK VERIZON RADIO or best the whole stock verizon rom package?
for those who need help getting the EPST setup I will post the current settings I am using in screenshots.
** I will update this post to reflect the best solution if the thread gets cumbersome.
Click to expand...
Click to collapse
I got this problem fixed with the help of an uncommonly smart tech support agent.
My first problems started when I accidentally put the sprint rom on my phone and let it boot.
I just called tech support about three times before I saw this post and they couldn't help me and they even did a DMU key reset without my knowledge and that didn't work. The last guy I talked to told me to bring the phone back into the store that I got it to get it replaced. Not wanting to do that beings that this was the last phone the store had in stock, I did one final search on google and found this site. After reading this post, I called back in to ask them to do a DMU key reset. The tech support agent then informed me that they already did a DMU reset and it obviously didn't work. He then wanted to try "something". He asked me to take the battery out of the phone and leave it like that while he put me on hold. I was on hold for about 3 minutes and when he got back on, he asked me to get back onto the phone and asked me to boot the device up again. He then asked me to dial *228 and let the phone reprogram. After I did that and it rebooted, I was able to use data. Whoohooo!!!!
I asked him what he did for my own personal benefit and he informed me that he actually temporarly removed my data package from my plan and reaplied it. But it was important that the device was turned off while he did it. Hence, the removal of the battery. I was very pleased with this guy. I thanked him profusely.
I'm posting this for the benefit of other people who are having problems with their data package after installing the sprint rom.
I haven't posted before, but I have a pretty difficult problem.
I tried installing one of those Sprint ROM/Radio setups on my phone, and like a dummy I let the customizations run. So here's what I did:
1) I flashed back to Verizon stock using the relocker and stock radio/rom. Once completed, it still shows roaming.
2) Then I used *228 option 1, then option 2, and the roaming icon goes away. Oh yeah, I also get the message "we are currently unable to authenticate your phone". No problem, not going to do anything else yet until I get a ROM/Radio combo I want.
3) Then I flashed the unlocker and (insert ROM/Radio combo here). I've tried most of them, following the compatibility list posted on this site. Most version of DCD's, 5067 (or whatever the # is), and radios 3.35, 3.37, 3.39, 3.49, etc. Once I get everything set, get a new A-key, I'm still roaming. The bottom line is that it doesn't matter what I use; the phone goes back into roaming mode. I then tried *228 option 1/option 2. *22899 does not work at all. I've tried to have them do the DMU resets; that doesn't seem to work. I've downloaded and installed new PRL files; that didn't help. In addition to roaming, my data isn't working either. I gave up and reflashed back to stock using the posted procedure.
4) Go back to step 1. I'm somewhere in this endless loop as we speak.
I can't fix it. I've followed almost every recommendation on this site. Verizon is sending me a new phone. In the meantime, I'd like to continue to try to fix this, but I don't know what else to do. Can anyone help???? Thanks.
schoolio said:
I haven't posted before, but I have a pretty difficult problem.
I tried installing one of those Sprint ROM/Radio setups on my phone, and like a dummy I let the customizations run. So here's what I did:
1) I flashed back to Verizon stock using the relocker and stock radio/rom. Once completed, it still shows roaming.
2) Then I used *228 option 1, then option 2, and the roaming icon goes away. Oh yeah, I also get the message "we are currently unable to authenticate your phone". No problem, not going to do anything else yet until I get a ROM/Radio combo I want.
3) Then I flashed the unlocker and (insert ROM/Radio combo here). I've tried most of them, following the compatibility list posted on this site. Most version of DCD's, 5067 (or whatever the # is), and radios 3.35, 3.37, 3.39, 3.49, etc. Once I get everything set, get a new A-key, I'm still roaming. The bottom line is that it doesn't matter what I use; the phone goes back into roaming mode. I then tried *228 option 1/option 2. *22899 does not work at all. I've tried to have them do the DMU resets; that doesn't seem to work. I've downloaded and installed new PRL files; that didn't help. In addition to roaming, my data isn't working either. I gave up and reflashed back to stock using the posted procedure.
4) Go back to step 1. I'm somewhere in this endless loop as we speak.
I can't fix it. I've followed almost every recommendation on this site. Verizon is sending me a new phone. In the meantime, I'd like to continue to try to fix this, but I don't know what else to do. Can anyone help???? Thanks.
Click to expand...
Click to collapse
dang, im here too... any fix?
quadjacks said:
dang, im here too... any fix?
Click to expand...
Click to collapse
Nope. New phone.
schoolio said:
Nope. New phone.
Click to expand...
Click to collapse
Verizon Stock ROM/PRI Update should fix calling
A DMU reset is PROBABLY needed to fix data (need to finango your way around tech support to get one)
scrawnyb said:
Verizon Stock ROM/PRI Update should fix calling
A DMU reset is PROBABLY needed to fix data (need to finango your way around tech support to get one)
Click to expand...
Click to collapse
Nope, did all that too.
schoolio said:
Nope, did all that too.
Click to expand...
Click to collapse
ok i am BACK!!! WOOT|WOOT
here is what i did.
Using the files from post 1 of this thread as no others i tried worked!
1 hard reset
2 ran relocker
3 ran ruu utility
4 allowed cust
5 ran *228
finaly no triangle (raoming icon), but not data
6 called VZW CS, explained i had done a hard reset, BLAH...BLAH...DUH...DUH... not sure why this is happening
a. she had me do everything i had already done (*228), reset username and pass...etc.
b. after 30 mins and at last resort, she removed then readded me to the system (reprovisioned, much like when cable internet modems go offline) SUCCESS
remember only use files from post one of the ablve link, others on here, ppcgeeks, smartphonejunkie oddly didnt help!
Now im back up to Rom 20226 radio 3.42... man im hard headed, but i have a kewl phone again!!!! hope this helps!!!!
NOTE: i was not able to use ##778 to manually program!!!!! so if you have a good tech, this may give him clues to your REAL issue.
also look here post 24
http://forum.ppcgeeks.com/showthread.php?p=271602#post271602
quad,
i am waiting (24 to 48 hrs )for their network team to do.... something to my phone, possibly the DMU reset. My tech wasn't able to do that on her own. I'm wondering if i can get a regular tech to do what they did for you....when you say they removed you then added you to the system, not exactly sure what that means
I'm Jealous.....
EDIT: BTW, my data connection settings won't keep a username and pwd stored....keeps dropping them every time after i put em in
so i bought a used vibrant off of a guy i know. And it worked perfectly. After a few days the phone just stopped working when i tried to do a factory update. Now the error i get when i try to make a call is "network not available" and where my bars would be it shows a circle with a line through it. I have tried booting on flashed roms and i have tried putting on stock 2.1, i have even tried to put the unlock code in, but nothing works at all!!! tmobile has no clue about anything and just keeps telling me to hard reset or send it in for repair but i have no insurance and i cannot be without a phone!!! please help me asap. i have also tried to go to select network and nothing comes up at all it used to say att and tmobile now nothing?? i am clueless here?!?!?!?! everything else works on the phone just no network as in wifi, market place etc. and i know its not my sim as i just got a new one and tried in my friends vibrant and it worked!
You might need to add the APN manually maybe?
Where you went to search network goto access point names and click on tmobile
The APN should be : epc.tmobile.com
MMSC should be : http:/ /mms.msg.eng.t-mobile.com/mms/wapenc
MMC should be : 310
MNC should be : 260
APN type should be : Internet+MMS
Just a suggestion but you could always just odin back to a factory fresh install. Sounds like the OTA update that you installed hosed something. Are you getting any SIM errors or anything else?
if u can (via wifi or something) download Rom Manager from the market and click on "fix permissions".... see if that helps.
all the settings in the apn are corect as per what the values you typed should be, i have rom manager and tried the quick fix with the permissions, nada, and this is the strangest problem as my sim card is reading as all my sim contacts are showing...so i know the sim card slot is not the issue, and when i tried to flash back to stock using odin 2x now, it still leaves out the calling feature, i was thinking maybe it has to do with the modem in the phone and somehow it got deleted for good unless i reinstall it???
clubstylenyc said:
all the settings in the apn are corect as per what the values you typed should be, i have rom manager and tried the quick fix with the permissions, nada, and this is the strangest problem as my sim card is reading as all my sim contacts are showing...so i know the sim card slot is not the issue, and when i tried to flash back to stock using odin 2x now, it still leaves out the calling feature, i was thinking maybe it has to do with the modem in the phone and somehow it got deleted for good unless i reinstall it???
Click to expand...
Click to collapse
This might be the fix you need. Download JFD tar and 512 pit files. It is a stock build that should completely clean and reinstall all the correct files needed. When you flash into Odin3 make sure repartition is UNTICKED or it will not work! I've had plenty of issues in the past and JFD has resolved every last one of them. J16 helps, but not with everything. Probably because it's just an update file.
Sent from my SGH-T959 using XDA App
This guy didn't happen to try unlocking the phone and mess anything up in the efs folder did he? Like the imei number....
Sent from my SGH-T959 using XDA App
As far as I know the imei is good according to the tmobile store I just,went to and I,tried the odin method it did not work do I need to reinstall the radio band somehow maybe?
clubstylenyc said:
As far as I know the imei is good according to the tmobile store I just,went to and I,tried the odin method it did not work do I need to reinstall the radio band somehow maybe?
Click to expand...
Click to collapse
What do you mean by it didn't work? The JFD file did not flash successfully or it did flash successfully, but you are still not getting a network signal? If no network signal then I advise you call T-Mobile and tell them you are having gps issues and they should replace the phone as long as it's still under warranty. It's worth a try. The worst they can say is sorry your warranty is expired.
Sent from my SGH-T959 using XDA App
the flash worked as in it was successful but no network still comes up. i called tmobile but since i bought the phone originally not from tmobile they said bring it back to the person you bought it from. tmobile even resent the signal to my phone and i was on the phone for over and our with them doing the same thing over and over, but to no avail. before i throw this phone on ebay for parts.... any other ideas???
ask the guy you bought it from.
Sent from my SGH-T959 using XDA App
did you check if airplane mode was on. i had it sometimes hide in the menus but never said in the notifications
So I checked airplane mode and nothing. It wasn't on that so still no fix. And the guy I got it from said he didn't do anything but I think he bsing. Is there anyone in the new york area that thinks they can fix this. Even if for a little fee it might be worth it?? Let me know asap I need a phone.
i guess no one found a fix for this as i still have the phone and the repair shop i got it back form seems like they didnt know what to do at all, even changed out the sim card slot to no avail.
clubstylenyc said:
i guess no one found a fix for this as i still have the phone and the repair shop i got it back form seems like they didnt know what to do at all, even changed out the sim card slot to no avail.
Click to expand...
Click to collapse
Does turning flight mode on then off let it come back online? The issue is a werid one, but has been popping up around the forums. I wish I had a concrete answer for you. When you Odin back to stock JFD firmware, it replaces the modem entirely and should set you back to how it came from the factory. If thats not working, I would go get my money back.
Could you fix your problem with the phone? I'm having the same problem here. The weird thing is that my phone is unlocked and it works with an AT&T sim card, when I try my T-mobile card, I can't make calls. I tried everything, flash back to stock with Odin, manual settings, Airplane mode off and on, around 10 different Roms, and a bunch other suggestions but I still can't make it work. Any help will be greatly appreciated.....
jmcghee1973 said:
You might need to add the APN manually maybe?
Where you went to search network goto access point names and click on tmobile
The APN should be : epc.tmobile.com
MMSC should be : http:/ /mms.msg.eng.t-mobile.com/mms/wapenc
MMC should be : 310
MNC should be : 260
APN type should be : Internet+MMS
Click to expand...
Click to collapse
Did you check these settings under Mobile Networks--AccessPoint Names? Do you see T-Mobile US as the selection? If you do, make sure the settings are as described here.
Flashing to stock would have fixed any issues that were software related... sounds like you have a hardware problem. You should odin back to stock.... wipe data/factory reset.... then flash again just to be sure. I've had funky issues that this has helped in the past
clubstylenyc said:
the flash worked as in it was successful but no network still comes up. i called tmobile but since i bought the phone originally not from tmobile they said bring it back to the person you bought it from. tmobile even resent the signal to my phone and i was on the phone for over and our with them doing the same thing over and over, but to no avail. before i throw this phone on ebay for parts.... any other ideas???
Click to expand...
Click to collapse
Try flashing Eugene's froyo that does not brick, here it is, it might fix the problem. HERE it is, try it, maybe it will work.
I have "mobile networks not available" problem also.
I flashed theese roms:
http://forum.xda-developers.com/show....php?t=1061889
http://forum.xda-developers.com/show....php?t=1021383
Problems are same for theese two problem.
1- There is no mobile network data. When i want to make call, it says, "mobile network not available".
I did the apn fix (set to default, reset etc.) No working.
I opened *#*#4636#*#* and do somethings explaning under "fixing network problems" threads.
Theese all not working.
I'm looking for help. This problem is not about sim card or operator(t-mobile etc.). Because a lot of people have same problem from all world. Every thidsd people using different gsm operators. So, fixing method with sim cards not working. This problem is about rom. Because, when downgrade to Android 2.1 or 2.2, there no problem. Please help.
2- Second problem is powering off it self every 15 minutes. All theese two roms have this problem. Not every time after 15 minutes. Sometimes after 10 minutes, sometimes after 40 minute (after boot).
2.1 and 2.2 also don't have this problem.
Please help.
There is a lot people on world using CyanogenMod. And they are flashing this rom with same method with rom manager.
Why this rom have problem about mobile network and powering of.
Thanks.
Click to expand...
Click to collapse
Hey guys,
I ran the Suckit Verizon boot unlocker exploit, and it was successful. At which point I used TW Recovery to flash Android Revolution HD 8.0 (N7100 ROM). My phone wouldn't connect to the Verizon network, saying I did not insert the proper SIM card. I found this strange, but realized Verizon locks their network to international phones. I then used the Verizon Toolkit to flash back to stock recovery and ROM. After doing so, I still had no luck in activating my phone.
I called tech support (now having stock everything) and they told me it was likely my SIM card. After spending 2 hours at the store today, it is clearly not the SIM card. They have no idea what the problem is...
When I flashed Android Revolution, I wiped my efs. Could that be the problem? Is it possible to flash a new EFS or COM3? I have no clue how to reactivate to the network..
Anyone have this problem? I did a search on both Suckit Verizon and the Verizon toolkit thread and no one appeared to suffer from this. Please help! Any solutions are greatly appreciated. Thanks in advance. Will update if those guys at Verizon come through.
Definitely has to do with wiping my EFS and not saving it. Under Settings > About > Status IMEI is unknown as well as all other carrier info.
Can someone send me their EFS or is their a way to restore the EFS without having backed it up?
Flash the full Odin restore image and that should fix the problem. Note, it will wipe your data and re-lock the bootloader, but it should at least connect to the network again.
If the stock Odin doesn't work since your imei is unknown this may be what you need, but listen to imnuts first
http://forum.xda-developers.com/showthread.php?p=36163537
Sent from my SCH-I605 (AKA NOTE 2)
kintwofan said:
If the stock Odin doesn't work since your imei is unknown this may be what you need, but listen to imnuts first
http://forum.xda-developers.com/showthread.php?p=36163537
Sent from my SCH-I605 (AKA NOTE 2)
Click to expand...
Click to collapse
Flashed stock rom. No luck. Now I have to root back, as one of the prerequisites is being rooted. Will get back.
I kind of had this same problem right after I rooted/unlocked and before flashing any ROMs. I was getting signal bars but kept getting a cannot connect to network error every time I tried to place a call. I called customer service and they "reset" my account, whatever that means but it still didn't work. Started driving to the Verizon store and decided to try one last factory reset and it started working! An IT guy at my work said the account reset plus factory reset got my device sync'd with Verizon signal again. Don't know if what he said is true...don't know why it worked...don't know if this will help you but I thought I would share my experience. I know what you are going through so good luck!
Sent from my SCH-I605 using xda app-developers app
I had almost the same problem using MIUI for AT&T's variant. I was able to get most functionality back by accessing the hidden menu and doing the ##RTN#, but still cannot get 4G LTE back. Maybe this will help you get started too.
http://forum.xda-developers.com/showthread.php?p=36163537
According to the OP instructions - which I have done entirely correct. Put phone in Debugging, Went to Qualcomm settings in Hidden menu and set to "RMNET + DM + MODEM" , connected to the proper COM port, clicked the READ on top, however when I go to click the second read to populate the information -> Says cannot set device into DM mode.
The instructions and accompanied video do not reference having to place the device into DM mode at all. The fact that I am getting this error message is also a unique problem.
Anyone know what this could mean or how to fix it? Could it be due to the USB Qualcomm settings not "taking or shifting", although it does confirm that I changed by saying "Saved"
Also, can Verizon Wireless sync my IMEI in store if I bring the original box with the IMEI barcode on it ? Can they flash / scan it to the phone?
anybody?
Can Verizon Wireless sync my IMEI in store if I bring the original box with the IMEI barcode on it ? Can they flash / scan it to the phone?
I know with a fact that the stores do not carry any flashing software for any smartphones. So there is nothing they can do.
Sent from my SCH-I605 using Tapatalk 2
Hi XDA ,
Am new in the Forum & First of all thanks to all of you for helping the forum and people. I'm having difficulties and I cant seem to find the way to fix this(its been 2 weeks)
My problem is the following: I have a Samsung Galaxy Note 3 details:
software version: N900PVPUBMI3
hardware version N900P.00
Status: network: Digital roaming
mobile network type CDMA-AxRTT
Android 4.4.2
KERNEL:[email protected]#1
A friend bought me this phone and called my carrier METROPCS and made them set up the phone so I could use it. they asked him for imei and sim number. He was able to use the phone and 4GLTE(he was doing this to verify it was unlocked) later on he gave me the phone and I had to do the same procedure he did but first I did a factory data reset.
After it I wasn't able to set it up again.
I've noticed that APN SETTINGS has disappeared from the menu, cant search for networks, when I load IMEI it no longer shows the imei but it shows MEID B0000000 and besides all of this I have a message that says SIM CARD INVALID.(but the sim card works perfectly on my other phone)
I will all my life appreciate if you help me with this matter please!
PS. phone is rooted as far as I know(root check on Google play store said it was)
Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Stand by
Good luck
XDAGeorge305 said:
Hi XDA ,
Am new in the Forum & First of all thanks to all of you for helping the forum and people. I'm having difficulties and I cant seem to find the way to fix this(its been 2 weeks)
My problem is the following: I have a Samsung Galaxy Note 3 details:
software version: N900PVPUBMI3
hardware version N900P.00
Status: network: Digital roaming
mobile network type CDMA-AxRTT
Android 4.4.2
KERNEL:[email protected]#1
A friend bought me this phone and called my carrier METROPCS and made them set up the phone so I could use it. they asked him for imei and sim number. He was able to use the phone and 4GLTE(he was doing this to verify it was unlocked) later on he gave me the phone and I had to do the same procedure he did but first I did a factory data reset.
After it I wasn't able to set it up again.
I've noticed that APN SETTINGS has disappeared from the menu, cant search for networks, when I load IMEI it no longer shows the imei but it shows MEID B0000000 and besides all of this I have a message that says SIM CARD INVALID.(but the sim card works perfectly on my other phone)
I will all my life appreciate if you help me with this matter please!
PS. phone is rooted as far as I know(root check on Google play store said it was)
Click to expand...
Click to collapse
You might try installing this app it find/gives all the hidden info on your device http://forum.xda-developers.com/not.../app-one-click-hotspot-enabler-menus-t2816159 it will give you APN's MEID AND IMEI . All you have to do is download to your PC, it my download as a zip file. Just use 7zip and rename it to an apk, then copy and paste it to your internal sd card via your charging cable. Then click on apk and install. Enjoy !!!
BTW your MEID is on a label under the battery !!!
jimzweb1 said:
You might try installing this app it find/gives all the hidden info on your device http://forum.xda-developers.com/not.../app-one-click-hotspot-enabler-menus-t2816159 it will give you APN's MEID AND IMEI . All you have to do is download to your PC, it my download as a zip file. Just use 7zip and rename it to an apk, then copy and paste it to your internal sd card via your charging cable. Then click on apk and install. Enjoy !!!
BTW your MEID is on a label under the battery !!!
Click to expand...
Click to collapse
Hi Jim/XDA
I'm still not able to connect to the network. Regarding the IMEI on the back part i know its there however what im saying is that im not able to see my imei through command when i dial *#06#
i as well had this errors today when i woke up:
: LTE:ESM-x EMM-14(ive seen this error when this issue started but it dissapeared and it came back know)
data roaming: you have lost data connectivity because you left your home network with data roaming turned off.
On mobile networks i remember i use to be able to select many(GSM,CDMA,etc) now in network mode i only see 2 options LTE/CDMA,CDMA. Currently LTE/CDMA is selected and if you just look at the network mode option without actually opening it it shows CDMA/LTE/EVDO.
Also when i opened the SCRTN it shows on black screen.
I tried to do some minor changes on Galaxy tools like the SIM UICC UNLOCK all mps,sales,default code on XAS. Factory & keystring ON. MSL/SPC show 222222.
After i did SIM UICC UNLOCK and restarted phone know took away all errors but i see the signal bars faded out and with a little red x on top of it. I've read the manual but im still wondering if there might still be things to set on a particular way that are not specified on it Can you please help me set this up properly?
XDAGeorge305 said:
Hi Jim/XDA
I'm still not able to connect to the network. Regarding the IMEI on the back part i know its there however what im saying is that im not able to see my imei through command when i dial *#06#
i as well had this errors today when i woke up:
: LTE:ESM-x EMM-14(ive seen this error when this issue started but it dissapeared and it came back know)
data roaming: you have lost data connectivity because you left your home network with data roaming turned off.
On mobile networks i remember i use to be able to select many(GSM,CDMA,etc) now in network mode i only see 2 options LTE/CDMA,CDMA. Currently LTE/CDMA is selected and if you just look at the network mode option without actually opening it it shows CDMA/LTE/EVDO.
Also when i opened the SCRTN it shows on black screen.
I tried to do some minor changes on Galaxy tools like the SIM UICC UNLOCK all mps,sales,default code on XAS. Factory & keystring ON. MSL/SPC show 222222.
After i did SIM UICC UNLOCK and restarted phone know took away all errors but i see the signal bars faded out and with a little red x on top of it. I've read the manual but im still wondering if there might still be things to set on a particular way that are not specified on it Can you please help me set this up properly?
Click to expand...
Click to collapse
Is this a Sprint variant? If so, you shouldn't have factory reset the phone. It looked like the phone was previously flashed to MetroPCS and by resetting the phone, it removed all the carrier data.
You will have to reflash the phone to get it working again.
nature954 said:
Is this a Sprint variant? If so, you shouldn't have factory reset the phone. It looked like the phone was previously flashed to MetroPCS and by resetting the phone, it removed all the carrier data.
You will have to reflash the phone to get it working again.
Click to expand...
Click to collapse
Is there a tutorial i could follow here ?
I greatly appreciate your help,
Regards
George
Hey guys, for those who need to edit an APN (Access Point Names), there is a little secret.
Go Settings, and scroll down the list. You will find a search box. Type there Access Piont Names and here it is.
The steps above are neccesary, since APN setting is hidden.
hi
today i install official LS990ZV8 after the installation i was trying to use the different carrier so i root the phone and unlock the sim with the help of this url after all these installation my phone got new network of different carrier but the problem is that i cant use the data of my carrier
i attached three pictures of it plzz help me
try to use ##72786# and update this will update data
Sent from my LGLS990 using XDA Free mobile app
happened to me a few times when flashing, i talked to the sprint cs ppl and they said it had to do with the towers not giving u the proper handshake when booting, i just kept doing the ##72786
I have the same problem and released this because I use with Telcel in Mexico but do not let me use data not shown me I get my operator Mimas options attached images...
work if I do say to type: ##72786# ???
only 3g on RR 5.5.5
I've had to experiement with lots of different ROMs to get the data working at the same time as the calls/texts on my phone.
i've used straighttalk for a while and finally abandoned that ship and went with Ting.
so far, other than stock rom, i only get service on Resurection remix but its only 3g.
anyone find a work around for this kind of problem?
I'm on their sprint CDMA network.