Related
I dont know why it is with these newer model phones, but just from the suggestion posts that came up when i entered the title of this thread, but My LGOT and i guess even the G2 have an issue where dusts starts to build up under the sceen....
Ive only had my phone for a little over 2 weeks, but even after the first couple days, i noticed that there were already a few trickles of dirt right around the middle of my screen.
I guess my main question is, is there anything i can do about this, has anyone had the same troubles, and what can we do to prevent this from happening?
In Thailand this is general problem of LG Optimus One
you should contact LG Customer support
they'll open your phone and blow dust out
if dust cause touchscreen malfunction they'll change new one for you
some people guess that dust already in the phone due to assembly process from factory
some guess maybe dust go through usb port
I have my phone since 2 days and i already have a dust spot in the lower right corner. This is annoying! If this spot is growing i will contact the costumer support.
Sent from my LG-P500 using XDA App
I am working on dusty area, but no dust under screen. Phone is 1 month old.
Me I have not this problem, but remains me the same issue with the iPhone 2/3 (google iphone dust screen).
I think it's a common problem with capacitive screen, but no "easy" solutions to fix it...
poor construction quality, imho.
chtamina said:
poor construction quality, imho.
Click to expand...
Click to collapse
this is one of those instances where a really cheap phone shows its faults. the phone is free on contract and little of $200 without. with it being so incredibly cheap, there is going to be something wrong that causes concern.
Im okay with it happening as long as it gets fixed and the problem is acknowledged by both LG and the phone carriers. it seems like many people are having this problem at the moment and T-Mobile is willing to exchange it in store, so good on them for being considerate.
i have the same issue. Don't know how to prevent that
ooyyeh said:
I have my phone since 2 days and i already have a dust spot in the lower right corner. This is annoying! If this spot is growing i will contact the costumer support.
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
Same Here! Very annoying because the phone is less than one week old!
I actually have not this problem my device is now over 2 weeks old. Maybe it depends on the area you are or temp.? ect...
Sent from my LG-P500
No dust here either. I have a silicon case, I don't think it helps very much.
just disassemble it. There is no warranty seal. You'll find the dust inbetween the lcd screen and the capacitive overlay.
Sent from my LG-P500 using XDA App
stefanblag said:
just disassemble it. There is no warranty seal. You'll find the dust inbetween the lcd screen and the capacitive overlay.
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
Can you show us a Video on how to do that?
I had problem with my device, called my operator and they exchanged my phone. New phone seems alright
Sent from my LG-P500 using XDA App
just disassemble it. There is no warranty seal. You'll find the dust inbetween the lcd screen and the capacitive overlay.
Sent from my LG-P500 using XDA App
Hi! please tell us how to do it!
I too have this problem Can any one please let us know how to get rid of it.
I have the same problem with my Optimus One, dust is starting to gather on the right bottom corner and it seems to have increased since the first time I saw it. I've thought about buying a can of compressed air and trying to blow it near the edge of the screen but maybe that will just make it spread even further.
I've also thought about unscrewing the screws on the back panel of the phone and clean it but I'm afraid that it will affect the capacitive screen in some way making it less responsive and that after I assemble it back together it'll become even less air tight and thus accumulate even more dust.
Maybe I'll reclaim my warranty but I'll have to un-root my phone and wipe it clean before leaving it at the store and it's going to be a pain in the ass to reinstall everything when it returns.
Will they replace the mobile for this problem?
You can back up everything by titanium backup and copy the titanium backup folder from sd to your pc or pen drive. In your newly replaced phone you can copy back this folder to sd card and after installing titanium backup application you can restore everything.
S3nd41 said:
I have the same problem with my Optimus One, dust is starting to gather on the right bottom corner and it seems to have increased since the first time I saw it. I've thought about buying a can of compressed air and trying to blow it near the edge of the screen but maybe that will just make it spread even further.
I've also thought about unscrewing the screws on the back panel of the phone and clean it but I'm afraid that it will affect the capacitive screen in some way making it less responsive and that after I assemble it back together it'll become even less air tight and thus accumulate even more dust.
Maybe I'll reclaim my warranty but I'll have to un-root my phone and wipe it clean before leaving it at the store and it's going to be a pain in the ass to reinstall everything when it returns.
Click to expand...
Click to collapse
Sent from my GT-I5700 using Tapatalk
Wow, DUST really get into the phone and I thought I was the only person experiencing this... actually it's on the "RIGHT BOTTOM PART" as posted S3nd41 and probably half of the users here has this problem....
Hey all,
I recently had an accident with my 32GB Touchpad I managed to recover from, so I thought I'd share the story for the benefit of anyone else who encounters the same issue. That said, if you do have this problem, proceed at your own risk. I am not advising you to do anything I did below, rather I am sharing my own experience.
Basically it got dropped around 6-8 feet down a carpeted stairwell. It appeared to land on the side edge with the volume button. To my surprise, the screen wasn't cracked and the buttons responded, but it wouldn't respond to touch.
First, I know this isn't covered by the warranty. [SOAPBOX] Of course, one could just lie to tech support and possibly get it covered, but that isn't how I roll. I've gotten by well in life by being straight with tech support but not taking any bs, not gonna change now.[/SOAPBOX] So, I did a live chat with tech support just to see what it would cost. Short answer, $238 for a tablet I paid $150 for. So no, I decided that if I couldn't fix it myself I'd part it out to others with broken displays etc, or give it to a dev. If I got any money for it, I'd buy an actual android pad.
Once again, PROCEED AT YOUR OWN RISK! I take no responsibility if you damage or brick your device.
Past experience told me that most likely a connector inside was the culprit. I search the forums and interwebs for dissembly instructions. I couldn't find any good ones, but managed to figure it out from the following two links;
http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/Countries/_MultiCountry/disassembly_handhe_2011617223529.pdf
http://www.techrepublic.com/photos/cracking-open-the-hp-touchpad/6253940?seq=8&tag=thumbnail-view-selector;get-photo-roto
If anyone knows a good dissasembly tutorial i missed on youtube or elsewhere, please post it. Anyway, I found the ribbon cables from the panel were indeed partially pulled from their connectors (see attached ribbon 1.jpg). Flipping up the black covers (see attached ribbon 2.jpg) I was able to reposition it and flipped the covers back down.
After a bit of trouble reassembling it (due to my being rough with the side catches around the bezel), my Touchpad is back to its former self, not counting a few scuffs in the plastic around the bezel from by hamfisted work. I'm happy, and my wife is happy I'm not eyeing the Touchpad I just gave her for her birthday . I hope someone benefits from this post, as I've benefited from others' posts here. Just trying to give back.
interesting read. Knowing what you know now, how long would think the whole process would take?
a40dayflud818 said:
interesting read. Knowing what you know now, how long would think the whole process would take?
Click to expand...
Click to collapse
No more than 15 minutes. Of course, I'd try to find a better tool like the one pictured in the linked PDF in my post above. Just gotta be sure the catches around the bezel are free so as not to pull up them up as you lift the lcd panel. They're actually separate pieces of plastic, not part of the bottom mold. One had slide out from under one of the PCBs. I had to remove a few screws to lift said PCB to reposition the catch, otherwise the panel wouldn't snap back in fully.
Nomedias said:
If anyone knows a good dissasembly tutorial i missed on youtube or elsewhere, please post it.
Click to expand...
Click to collapse
It's not a video, but the steps for various replacements are quite well explained here : http://www.ifixit.com/Device/HP_TouchPad
Sine. said:
It's not a video, but the steps for various replacements are quite well explained here : http://www.ifixit.com/Device/HP_TouchPad
Click to expand...
Click to collapse
I definitely give the thumbs up with that tutorial. Very good. A pocket knife blade was my tool of choice to take the cover off!
Thanks for the tutorial.
Sorry to revive the old thread. However, my touchpad is not responding to touch, everything else is functional (it boots perfect and able to update using JC toolbox to latest 4.4.4).
I tried to plug unplug the video connector few times (after disassembling) but still it does not respond to touch. Any suggestion will be highly appreciated.
Thanks in advance.
Mac
Do you still have WebOS or a touch enabled recovery installed? That could help determine if the problem is more likely hardware or software. If it is hardware you have already done what I could do.
Sent from my SM-T900 using XDA Premium HD app
Nomedias said:
Do you still have WebOS or a touch enabled recovery installed? That could help determine if the problem is more likely hardware or software. If it is hardware you have already done what I could do.
Sent from my SM-T900 using XDA Premium HD app
Click to expand...
Click to collapse
I have completely wiped the system and removed the WebOS by using JC toolbox. However, I do have touch recovery and while booting in recovery also have problem for touch(does not respond to touch, can select using volume up/down and home button). Does it mean touch screen is now defective? Can it be replaced and is it worth try? Appreciate your input.
Thanks
macwindows said:
I have completely wiped the system and removed the WebOS by using JC toolbox. However, I do have touch recovery and while booting in recovery also have problem for touch(does not respond to touch, can select using volume up/down and home button). Does it mean touch screen is now defective? Can it be replaced and is it worth try? Appreciate your input.
Thanks
Click to expand...
Click to collapse
I would agree it sounds like either the digitizer or control board may be bad. I don't know enough to say more though. As for if it is worth it, do a search on eBay. Used Touchpads sell for under $100. New for around twice that. Nonfunctional units sell for under $50. Maybe you get lucky and can buy one with a working digitizer. If it were me, I would buy a functioning used Touchpad and sell the bad one. Or keep it for spare parts. With current more powerful 10" tablets selling new for $300-500, I'd be careful not to put too much into it.
Good luck!
Sent from my SM-T900 using XDA Premium HD app
I couldn'd find any "more powerful" tablets with 32GB ram and wireless charging. Do you know some? I bought a used touchpad then.
ranjib said:
I couldn'd find any "more powerful" tablets with 32GB ram and wireless charging. Do you know some? I bought a used touchpad then.
Click to expand...
Click to collapse
You got me on wireless charging. ☺ Not counting that I was thinking of a Nexus 9 or 10, or a Galaxy Tab. A Galaxy Tab Pro 10.1" 16GB goes for $320. It has a microSD slot and an Exynos 5 Octa CPU.
Sent from my SM-T900 using XDA Premium HD app
Well if my son continues to beat my TP up the way he does, I will definitely look at this method for the first step to solving possible touchscreen issues haha, thanks
Nomedias said:
Hey all,
I recently had an accident with my 32GB Touchpad I managed to recover from, so I thought I'd share the story for the benefit of anyone else who encounters the same issue. That said, if you do have this problem, proceed at your own risk. I am not advising you to do anything I did below, rather I am sharing my own experience.
Basically it got dropped around 6-8 feet down a carpeted stairwell. It appeared to land on the side edge with the volume button. To my surprise, the screen wasn't cracked and the buttons responded, but it wouldn't respond to touch.
First, I know this isn't covered by the warranty. [SOAPBOX] Of course, one could just lie to tech support and possibly get it covered, but that isn't how I roll. I've gotten by well in life by being straight with tech support but not taking any bs, not gonna change now.[/SOAPBOX] So, I did a live chat with tech support just to see what it would cost. Short answer, $238 for a tablet I paid $150 for. So no, I decided that if I couldn't fix it myself I'd part it out to others with broken displays etc, or give it to a dev. If I got any money for it, I'd buy an actual android pad.
Once again, PROCEED AT YOUR OWN RISK! I take no responsibility if you damage or brick your device.
Past experience told me that most likely a connector inside was the culprit. I search the forums and interwebs for dissembly instructions. I couldn't find any good ones, but managed to figure it out from the following two links;
[Removed Links... Noobie here]
If anyone knows a good dissasembly tutorial i missed on youtube or elsewhere, please post it. Anyway, I found the ribbon cables from the panel were indeed partially pulled from their connectors (see attached ribbon 1.jpg). Flipping up the black covers (see attached ribbon 2.jpg) I was able to reposition it and flipped the covers back down.
After a bit of trouble reassembling it (due to my being rough with the side catches around the bezel), my Touchpad is back to its former self, not counting a few scuffs in the plastic around the bezel from by hamfisted work. I'm happy, and my wife is happy I'm not eyeing the Touchpad I just gave her for her birthday . I hope someone benefits from this post, as I've benefited from others' posts here. Just trying to give back.
Click to expand...
Click to collapse
This is a topic which I don't really like to talk about, but I now want to take the approach to get it outa my mind: The backlight of my soft-key search button does not fully shut down. That is, if I let the phone sit until the lights of the soft-keys (home, menu, back- and search button) shut down, I still see a dimmed light behind my search button. It annoys me.. I know I'm a picky girl.
Is that a hardware failure or do you guys have that, too? I'm convinced it's NOT caused by my current ROM (running DisarmedToaster). Can you recommend an app which will test my phone for hardware failures?
I bought my EVO 3D with blood money and would not really like unrooting and putting the phone into original warranty state to go beg the company I bought it from for a replacement. Please help a desperate lady!
SecUpwN said:
This is a topic which I don't really like to talk about, but I now want to take the approach to get it outa my mind: The backlight of my soft-key search button does not fully shut down. That is, if I let the phone sit until the lights of the soft-keys (home, menu, back- and search button) shut down, I still see a dimmed light behind my search button. It annoys me.. I know I'm a picky girl.
Is that a hardware failure or do you guys have that, too? I'm convinced it's NOT caused by my current ROM (running DisarmedToaster). Can you recommend an app which will test my phone for hardware failures?
I bought my EVO 3D with blood money and would not really like unrooting and putting the phone into original warranty state to go beg the company I bought it from for a replacement. Please help a desperate lady!
Click to expand...
Click to collapse
Mine has done that since the day I bought it, although I bought mine used so I just dealt with it. It looks more like bleed from the backlight on the display but i'm not sure. It must be pretty common if we both have it.
richyrocket said:
Mine has done that since the day I bought it, although I bought mine used so I just dealt with it. It looks more like bleed from the backlight on the display but i'm not sure. It must be pretty common if we both have it.
Click to expand...
Click to collapse
Thank you so much for stating this, exactly what I was talking about! Kind of a small release to hear I didn't buy faulty hardware. Do we have other readers here who can confirm that this behavior is normal?
I'll head out to the phone store today to double check. Still, does an app exist to check for hardware failures?
Yes no faulty equipment, it is normal on every single Evo.
( Don't ask for help as I couldn't care if your phone explodes, eh)
flashallthetime said:
Yes no faulty equipment, it is normal on every single Evo.
Click to expand...
Click to collapse
You just saved my whole HTC experience. Thank you soo much! How come this is the case on every EVO? Isn't that something draining the battery?
No it is actually bleeding from the main screen, I guess there's a small gap between the search button and the screen
( Don't ask for help as I couldn't care if your phone explodes, eh)
I noticed that too, but only when I boot up my phone, then the problem goes away after it gets past the boot animation.
Jsparta26 said:
I noticed that too, but only when I boot up my phone, then the problem goes away after it gets past the boot animation.
Click to expand...
Click to collapse
Use your phone in the dark. Watch until soft buttons stop glowing. See the light behind the search button?
Mine has it too.
Sent from my HTC EVO 3D X515m using xda app-developers app
Jsparta26 said:
I noticed that too, but only when I boot up my phone, then the problem goes away after it gets past the boot animation.
Click to expand...
Click to collapse
Turn the backlight of touch buttons off using kernel tuner and keep screen on, you will notice light behind search key.
Yeh, methinks it's standard in all our phones fixed mine when i was replacing my digitizer (put a bit of plastic behind the search key to stop the overspill)
dessolator666 said:
Yeh, methinks it's standard in all our phones fixed mine when i was replacing my digitizer (put a bit of plastic behind the search key to stop the overspill)
Click to expand...
Click to collapse
Did you void your warranty through opening it? How about the buttons responsiveness afterwards? If you provide a detailed HowTo, you'll get another +1. :thumbup:
SecUpwN said:
Did you void your warranty through opening it? How about the buttons responsiveness afterwards? If you provide a detailed HowTo, you'll get another +1. :thumbup:
Click to expand...
Click to collapse
Yeh, warranty gone after opening it.... though now that I think of it... there may be a way around that. Namely I replaced the entire digitizer so I needed to take it apart fully, however since all the connections and cables are at the top of the screen and the buttons are (obviously ) on the bottom you could lift the digitizer up from the bottom and fix it without messing with the screws in the back (the one that voids your warranty).
To actually do this you will need:
Heat gun(or decent hair drier) anything with 500w or above should be plenty
Some good double sided adhesive tape (probably won't be able to reuse the original one)
A case opener tool (to lift the digitizer)
A piece of plastic or anything else opaque and nonconductive
Procedure:
heat up all the edges of the digitizer evenly (don't cook them, just heat them up )
Using a case opener tool get in between the digitizer and the aluminium chassis starting at the bottom and work your way up to the top
When the bottom and sides are free gently lift the digitizer with the top as a hinge point heating it up if necessary.
Ta da! You can see the inner workings of the buttons
Notice that the buttons have pieces of transparent plastic leading light from the LEDs to the actual surface the light overspill happens around the search button so I put a tiny piece of plastic around it (there are probably more elegant ways around this... but I'm not that elegant to begin with so this worked just fine.
Cut out thin strips of tape and put them on the edges of the digitizer where the old adhesive was (or reuse the old adhesive if you can)
Close up the phone and there you have it... your warranty should still be valid... tho if any1 opens the phone up they will probably notice the extra piece of plastic (or whatever you used)
On a similar note my gf's digitizer is busted so I will be replacing it some time this or next week and could probably demonstrate this with photos before I actually replace the darn thing (assuming I can get ahold of a decent camera)
dessolator666 said:
On a similar note my gf's digitizer is busted so I will be replacing it some time this or next week and could probably demonstrate this with photos before I actually replace the darn thing (assuming I can get ahold of a decent camera)
Click to expand...
Click to collapse
That would actually be the coolest contribution I've seen in a ling time! Are you really willing to do that for our EVO community? If you did, you'd be our king.
Don't worry, it's on every EVO 3D. From GSM to CDMA.
The light bleed is from the screen back light. It does give the phone a cheap feel sometimes, but it's a common problem.
It's not as prevalent on cm10 with inverted gapps
(Don't ask me for help as I couldn't care if your phone explodes, eh! )
flashallthetime said:
It's not as prevalent on cm10 with inverted gapps
Click to expand...
Click to collapse
How come?
SecUpwN said:
How come?
Click to expand...
Click to collapse
Inverted gapps has black backgrounds so the screen bleeding is reduced
(Don't ask me for help as I couldn't care if your phone explodes, eh! )
---------- Post added at 10:56 PM ---------- Previous post was at 10:51 PM ----------
I can drastically reduce screen brightness which helps, there's still some bleeding
(Don't ask me for help as I couldn't care if your phone explodes, eh! )
dessolator666 said:
Yeh, warranty gone after opening it.... though now that I think of it... there may be a way around that. Namely I replaced the entire digitizer so I needed to take it apart fully, however since all the connections and cables are at the top of the screen and the buttons are (obviously ) on the bottom you could lift the digitizer up from the bottom and fix it without messing with the screws in the back (the one that voids your warranty).
To actually do this you will need:
Heat gun(or decent hair drier) anything with 500w or above should be plenty
Some good double sided adhesive tape (probably won't be able to reuse the original one)
A case opener tool (to lift the digitizer)
A piece of plastic or anything else opaque and nonconductive
Procedure:
heat up all the edges of the digitizer evenly (don't cook them, just heat them up )
Using a case opener tool get in between the digitizer and the aluminium chassis starting at the bottom and work your way up to the top
When the bottom and sides are free gently lift the digitizer with the top as a hinge point heating it up if necessary.
Ta da! You can see the inner workings of the buttons
Notice that the buttons have pieces of transparent plastic leading light from the LEDs to the actual surface the light overspill happens around the search button so I put a tiny piece of plastic around it (there are probably more elegant ways around this... but I'm not that elegant to begin with so this worked just fine.
Cut out thin strips of tape and put them on the edges of the digitizer where the old adhesive was (or reuse the old adhesive if you can)
Close up the phone and there you have it... your warranty should still be valid... tho if any1 opens the phone up they will probably notice the extra piece of plastic (or whatever you used)
On a similar note my gf's digitizer is busted so I will be replacing it some time this or next week and could probably demonstrate this with photos before I actually replace the darn thing (assuming I can get ahold of a decent camera)
Click to expand...
Click to collapse
I don't believe it can be done without opening the back. If I'm not mistaken, that's where the connector is and it can't be accessed from the front. I could be wrong though
Sent from my PG86100 using Tapatalk
HermanV0929 said:
I don't believe it can be done without opening the back. If I'm not mistaken, that's where the connector is and it can't be accessed from the front. I could be wrong though
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
I'm sure it can be done... because you have to do pretty much exactly that when replacing the LCD or digitizer
I have a very specific question with regards to replacing the charging port on the i777. I have searched threads discussing charging port replacement, but was unable to find anything about this specific issue. I am currently going through my first repair on my i777 that needs a new charging port. I bought the replacement on ebay, but something stood out once I compared it to the original charging port I took out. On the original there is a small rubber piece hanging down (around where the screw holes are). On the replacement piece it's just a metal piece hanging down in the same place. Do I need to have that rubber piece on the replacement charging port? Would it even affect the functionality of the phone? Is there a way to take the rubber piece off the original and transfer it to the replacement, or should I just buy one with the rubber piece on? If someone has asked this question already forgive me, but I did not see it in the thread I skimmed through.
Here is a pic of both them side by side. The top one is the original and the bottom is the replacement I got from ebay.
farm8.staticflickr (.com) /7281/9735538853_4e701482f8_o (.jpg)
It would not let me post link yet so just remove parentesis and spaces to view picture link.
That gray part is for waterproofing the microphone I believe. It just slides off of the old part and onto the new one, just be careful. Also if you have no signal, by now you may have already found the following thread. I had to do this a couple of weeks ago to get a signal: http://forum.xda-developers.com/showthread.php?t=1950114&page=5 I'll try harder to match up the part numbers next time!
iXNyNe, please let us know if the newegg part works, or if you end up needing to modify it (see link in above post), or purchase another.
iXNyNe said:
http://www.newegg.com/Product/Product.aspx?Item=9SIA2C51D87922 just ordered this. [...]
Click to expand...
Click to collapse
cyril279 said:
iXNyNe, please let us know if the newegg part works, or if you end up needing to modify it (see link in above post), or purchase another.
Click to expand...
Click to collapse
i'll report back once i have them
i already took the phone apart just to peek around inside, the part looks just like what's already there. the picture shows some teal/aqua colored tabs towards the bottom, im assuming these are peel off for an adhesive (there did seem to be an adhesive holding the part in place).
based on that link mentioned i would say that cutting is a little extreme, it looks like they cut the board in half, which is definitely NOT how it comes stock.
again i'll report back once i've got the chips. and for under $8 with free shipping i cant really complain even if they dont work out.
The only thing you're actually cutting (electronically) is the ground plane of the board shared by the antenna/radio and the charge port. In short, there's a super low risk of messing anything up, unless you use a sawzall to complete the job.
I assume that it was more cost effective for Samsung to put those items on the same board, but it's a punk move to attach a known replacement part to an antenna that varies by region. Either way, I'm glad to know that the hack is an option but I'd be happier to know that the hack isn't necessary.
iXNyNe said:
i'll report back once i have them
i already took the phone apart just to peek around inside, the part looks just like what's already there. the picture shows some teal/aqua colored tabs towards the bottom, im assuming these are peel off for an adhesive (there did seem to be an adhesive holding the part in place).
based on that link mentioned i would say that cutting is a little extreme, it looks like they cut the board in half, which is definitely NOT how it comes stock.
again i'll report back once i've got the chips. and for under $8 with free shipping i cant really complain even if they dont work out.
Click to expand...
Click to collapse
Just wanted to report success. The part from new egg worked and was really easy to swap.
I don't have the right size sim card anymore since switching my primary carry, so I can't test reception, but otherwise everything is working (charging, wifi, Bluetooth, etc)
P.s. I did not modify the item I received (no cutting) and it is a 2.3 where the original I removed was a 2.2. I've saved the 2.2 just in case something comes up.
Sent from my LG-D800 using Tapatalk
Thanks, but I'm afraid that we won't know whether the replacement part is a proper replacement until there is a sim-card involved. Reception is the rub (see post below from the board-mod thread).
underhuggare said:
[...]I also replaced the original rev 2.2 with rev 2.3 which fixed the usb port but gave me very unstable and poor reception. [...]
Click to expand...
Click to collapse
iXNyNe said:
Just wanted to report success. The part from new egg worked and was really easy to swap.
I don't have the right size sim card anymore since switching my primary carry, so I can't test reception, but otherwise everything is working (charging, wifi, Bluetooth, etc)
P.s. I did not modify the item I received (no cutting) and it is a 2.3 where the original I removed was a 2.2. I've saved the 2.2 just in case something comes up.
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
cyril279 said:
Thanks, but I'm afraid that we won't know whether the replacement part is a proper replacement until there is a sim-card involved. Reception is the rub (see post below from the board-mod thread).
Click to expand...
Click to collapse
I'll see if I can find a friend with a full size Sim over the next few days and test the reliability. But honestly I'd have to it may be better for people to find a rev 2.2
But for anyone who no longer uses the phone for cell service, the new egg part works great for a cheap and easy charge port replacement.
Sent from my LG-D800 using Tapatalk
Hello XDA Community!
I seem to be having a serious issue with my phone and cannot seem to find a solution online, so I am hoping that someone here will be knowledgable enough to assist me!
When I slide my keyboard out on my sk17i, my screen refuses to change orientation or respond to my touches. Having tested this further, it seems that it is the screen itself that will not change, but keys pressed and touches are registered. I have figured out that I can slide the keyboard out about 40% (just over the bottom row of letters) and the screen seems to change orientation to landscape AND responds visually to my touches. Any more than that and it just stops.
I looked online and someone suggested passing a magnet (fridge) over the keyboard. I did that and it worked once for about a minute. After that it returned to this state and there doesn't seem to be anything I can do about it. I have just put in an order for new facias and a new hardware keyboard to repair it as I have had it since the day it was released and some components are getting on a bit.
Does anyone know what the issue is? I only can think of one thing and that is a flex cable issue, but I cannot be sure at all...
I'd appreciate any help that can be given!
At first glance, yes, seems like a flex cable/ribbon issue. You screen will remain frozen when the keyb is completely open because the framebuffer stops receiving signal from the motherboard. It wont take long until your screen shows artifacts or goes completely blank even when the keyb is closed. Your touch digitizer might also be affected by a bad flex cable.
I suggest you replace it as soon as possible, but don't try to do it yourself unless you have experience repairing phones. I tried to do mine and ruined the LCD display, making my repair cost three times as much
PD: magnet over the keyb? never heard of that.
Pixelado said:
At first glance, yes, seems like a flex cable/ribbon issue. You screen will remain frozen when the keyb is completely open because the framebuffer stops receiving signal from the motherboard. It wont take long until your screen shows artifacts or goes completely blank even when the keyb is closed. Your touch digitizer might also be affected by a bad flex cable.
I suggest you replace it as soon as possible, but don't try to do it yourself unless you have experience repairing phones. I tried to do mine and ruined the LCD display, making my repair cost three times as much
PD: magnet over the keyb? never heard of that.
Click to expand...
Click to collapse
Many thanks for that! The flex cable is out of stock right now, so that is quite worrying, I hope it lasts the next month or so! I think I should be okay with repairing it, since I've worked with very small and delicate electronics before in Engineering. Just will have to be super extra careful! Any advice about what to watch out for?
And yup, magnet seemed to work once, I saw it on a very old thread, but that was the only advice given there.
Well, good luck! Be extremely careful with the display though, the original display assembly has unprotected corners and borders on the LCD so it's very easy to break it, especially on the lower side near the softkeys. Replacement parts often come with plastic and/or metallic protectors on them, which help keeping the LCD safe. Guess SE never meant for people to crack the phone open hehe.
again, good luck with that.
Pixelado said:
Well, good luck! Be extremely careful with the display though, the original display assembly has unprotected corners and borders on the LCD so it's very easy to break it, especially on the lower side near the softkeys. Replacement parts often come with plastic and/or metallic protectors on them, which help keeping the LCD safe. Guess SE never meant for people to crack the phone open hehe.
again, good luck with that.
Click to expand...
Click to collapse
Aah okay! I guess I shouldn't bother replacing the facia then, don't want to break the screen! Thank you once again!
Well, all my parts have now arrived, so tonight I'll be attempting this! Hopefully this goes well and fixes the problem!
ECGadget said:
Well, all my parts have now arrived, so tonight I'll be attempting this! Hopefully this goes well and fixes the problem!
Click to expand...
Click to collapse
Best of luck to you, mate.
Replacing a flex ribbon/cable on the mini pro is no easy task, requires patience and steady hands when sticking the big square part onto the metallic slider while making sure all of the other components (home button, camera, led and sensors) keep aligned in place. Do it wrong and you're in for an even more tedious mission haha.
PD: here's a crappy pic from when I did mine
Pixelado said:
Best of luck to you, mate.
Replacing a flex ribbon/cable on the mini pro is no easy task, requires patience and steady hands when sticking the big square part onto the metallic slider while making sure all of the other components (home button, camera, led and sensors) keep aligned in place. Do it wrong and you're in for an even more tedious mission haha.
PD: here's a crappy pic from when I did mine
Click to expand...
Click to collapse
Thanks for that! I was just struggling to take the motherboard off, and looking at the picture helped me see where I could try to pry it open!
Yeah, the mobo can be a b*tch to take off. Glad I could help. Be sure to tell us how it goes.
Pixelado said:
Yeah, the mobo can be a b*tch to take off. Glad I could help. Be sure to tell us how it goes.
Click to expand...
Click to collapse
Well, after a cracked front facia (thanks to the previous repair that I had on it two years ago), and my temperamental lights, my phone works a charm! Replaced the flex cable, motherboard mount and hardware keyboard. Once again, thank you so much for your advice, I have decided to hang around this place much more often!
Repaired two years ago? Wow, your phone is kind of a veteran haha, mine is about to turn 2yo in about two months. Gotta get a birthday cake.
Good to know everything went fine. See you.
Pixelado said:
Repaired two years ago? Wow, your phone is kind of a veteran haha, mine is about to turn 2yo in about two months. Gotta get a birthday cake.
Good to know everything went fine. See you.
Click to expand...
Click to collapse
I've had my phone since two weeks before it was released in 2011 xD
I'm sure your phone will love the cake
Noticed a new glitch with my phone though... the softkey and keyboard lights start to light up when I switch the screen on, but as soon as the screen switches on the lights switch off?
Never heard of such problems. What rom are you on?
I am running a stock gingerbread 2.3.3 rom, just rooted it a year ago. No other changes, apart from shoving CWM onto it for backup/restore
Hey guys, I just saw this post after hours of frustration!, I recently changed my damaged slider mechanism on my sk17i and I had to transfer the ribbon cable from the one mechanism to the other but I glued it with 2mm adhensive that is used for screen, and the problem is when I open the phone it is always on landscape mode, like the phone thinks the keyboard is always out! Before I tried this repair
everything worked perfect
How the phone understands if the keyboard is out or not?
Please tell me what I could have done wrong, I would appreciate your help here!
Sorry for my bad english
Thank you in advance!!!
I've been trying to figure that out myself too, it seems to be some kind of optical sensor. Whatever it is, it just works for me hehe.
Pixelado said:
I've been trying to figure that out myself too, it seems to be some kind of optical sensor. Whatever it is, it just works for me hehe.
Click to expand...
Click to collapse
And you dissasembled it and re-assembled with no problems?
r3izor said:
And you dissasembled it and re-assembled with no problems?
Click to expand...
Click to collapse
Welcome to XDA.
Like Pixelado said, it is probably an optical sensor. My advice would be to disassemble the phone again (without unsticking the flex cable though) and make sure everything is back in its correct place. It make just be something is a little out of place, which is very easy to do! Good luck!
r3izor said:
And you dissasembled it and re-assembled with no problems?
Click to expand...
Click to collapse
Yes sir. I have never re-used a flex ribbon though. I removed the broken factory ribbon and stuck a new one in. No problems.
Pixelado said:
Yes sir. I have never re-used a flex ribbon though. I removed the broken factory ribbon and stuck a new one in. No problems.
Click to expand...
Click to collapse
Then as long as I dont know where the sensor is in order to find out my mistake, I am afraid my phone will be permanently on landscape :crying:
Thank you for your replies guys!