Q&A for [PORT] [Unofficial] [4.4.4] LiquidSmooth v3.2
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [PORT] [Unofficial] [4.4.4] LiquidSmooth v3.2. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Will flash soon
Awesome
Awesome very smooth, you build or just port from Samsung Captivate?
port from I9000
Apps to Sdcard option missing
I cant seem to get apps to sd card option to work... Its missing in the Settings/Apps path. Lucky patcher and titanium backup cant seem to move apps either...Is it a partitioning issue from the kernel? Help anyone?
I use iyaman's semaphore kernel...
mcselasie said:
I cant seem to get apps to sd card option to work... Its missing in the Settings/Apps path. Lucky patcher and titanium backup cant seem to move apps either...Is it a partitioning issue from the kernel? Help anyone?
I use iyaman's semaphore kernel...
Click to expand...
Click to collapse
iyahman's kernel is already integrated into the ROM. Did you flash the s version because if you did then that was your mistake, this is an AOSP/slim based ROM and it uses the sv version which is already inside.
hey
You must flash Gapps after you flash ROM now you go to Recovery and install Gapps zip. Done. Flash Gapps like you flash ROM
slimroms.net/index.php/downloads/dlsearch/viewcategory/1150-addons4-4
Thanhtho96 said:
You must flash Gapps after you flash ROM now you go to Recovery and install Gapps zip. Done. Flash Gapps like you flash ROM
slimroms.net/index.php/downloads/dlsearch/viewcategory/1150-addons4-4
Click to expand...
Click to collapse
not quite understanding what you're saying but if you want to knoww if you should flash Gapps after then yes
Confused
RudeBwoy said:
iyahman's kernel is already integrated into the OKROM. Did you flash the s version because if you did then that was your mistake, this is an AOSP/slim based ROM and it uses the sv version which is already inside.
Click to expand...
Click to collapse
I flashed the sv version.... I tried repartitioning my sd card so I can use link2sd instead but after repartitioning, sd card cant be mounted. What could be wrong.?
mcselasie said:
I flashed the sv version.... I tried repartitioning my sd card so I can use link2sd instead but after repartitioning, sd card cant be mounted. What could be wrong.?
Click to expand...
Click to collapse
I really don't know what to tell you then because I've never done any of that before, try flashing the ROM again and then repartition or search around the forum to see if anyone had any similar issue
Eureka!!!
So I flashed Neat kernel on this and realised I had 417mb RAM but streaming wasnt working like everyone had been complaining on the neat kernel post. So I decided to flash the bigmem fix that comes with the sv version of Semaphore kernel and it worked..
I've now got 417 mb RAM and youtube and all other streaming apps are working fine???.... Liquid smooth is smoother than ever now... Still haven't figured out how to move apps to sd card tho...?
mcselasie said:
So I flashed Neat kernel on this and realised I had 417mb RAM but streaming wasnt working like everyone had been complaining on the neat kernel post. So I decided to flash the bigmem fix that comes with the sv version of Semaphore kernel and it worked..
I've now got 417 mb RAM and youtube and all other streaming apps are working fine???.... Liquid smooth is smoother than ever now... Still haven't figured out how to move apps to sd card tho...?
Click to expand...
Click to collapse
Really? Thats cool thanks for the tip I thought it only worked on the semaphore kernels. About the sdcard thing did you try a different app? You just have to look around and try different things to see if they work
RudeBwoy said:
Really? Thats cool thanks for the tip I thought it only worked on the semaphore kernels. About the sdcard thing did you try a different app? You just have to look around and try different things to see if they work
Click to expand...
Click to collapse
Aye Thanks Bro
Related
Hi guys,
sorry for cross-posting (http://forum.xda-developers.com/xperia-neo/help/xperia-pro-issue-mount-sd-ext-t2826503) but
my phone is becoming unstable because of very low free space/memory available
and did not receive answers.
Thank you very much!
Hi eXperts,
last month I flashed the great Ultimate HD rom, so stable and now my wonderful Xperia pro is much faster
Before to do that anyway I used Mount2SD app to get my external sd mounted and solve, in this way,
common issue about "memory unavailable" and similars when I tried to add or update an app.
Now , Mount2SD is no more working, with no log entries, even if detailed debug verbose is enabled; first
I was thinking there is issue with Init.d support... But it sounds strange because before UHD I used the original stock rom by sony,
rooted of course, and furthermore I checked with a tool (embedded inside universal Init.d) and it shows me that Init.d support
is green and working....
So, looking beyond, my question is how to definitively solve this issue, changing kernel or something else
and give my phone support to mounting external sd native. Which kernel may I flash ? Working together with UHD?
Fast?
My phone is mk16i and must keep physical keyboard working, cwm, rooted.
Will this operation break my current configuration in terms of installed apps and so on?
My Xperia pro is unlocked bootloader.
Thank you very much in advance!!
Click to expand...
Click to collapse
XperiaPro55 said:
Hi guys,
sorry for cross-posting (http://forum.xda-developers.com/xperia-neo/help/xperia-pro-issue-mount-sd-ext-t2826503) but
my phone is becoming unstable because of very low free space/memory available
and did not receive answers.
Thank you very much!
Click to expand...
Click to collapse
Hi guys, no one could support ? Are all the guru on vacation :crying::crying:?
I am trying to understand which kernel is currently updated and if it's ok for my phone but I still get no success!
Help me please!
Thanks!!
XperiaPro55 said:
Hi guys, no one could support ? Are all the guru on vacation :crying::crying:?
I am trying to understand which kernel is currently updated and if it's ok for my phone but I still get no success!
Help me please!
Thanks!!
Click to expand...
Click to collapse
1. Try flashing stock GB/ICS
2. Try using a different sd card
That's basically all you can do. If you're doing everything right (flashing and wiping accordingly) and it still doesn't work, it's definitely a hardware problem. Then you'll need to pin point what is causing the problem.As I recall you said that your sd card works properly? Can you can copy/move stuff from and to it, view all the media you have on it without problems?
Grof87 said:
1. Try flashing stock GB/ICS
2. Try using a different sd card
That's basically all you can do. If you're doing everything right (flashing and wiping accordingly) and it still doesn't work, it's definitely a hardware problem. Then you'll need to pin point what is causing the problem.As I recall you said that your sd card works properly? Can you can copy/move stuff from and to it, view all the media you have on it without problems?
Click to expand...
Click to collapse
Hi Grof,
flashing stock GB/ICS does not help. I use stock kernel since the beginning... and no stock kernel
is able to mount sd-ext file system in order to use sd as a natural extension of internal memory.
As I wrote in the beginning I already reached out result I want, using Mount2Sd with stock kernel but now
I want to solve with a new full featured and modded kernel that embeds useful functionality just like CWM and
of course internal memory extension using sd-ext filesystem..
That's the point.
My sd card is perfect, nothing to complain and working like a charm! I "only" need the first part.
Regards
If I get what you are saying, you just want someone to recommend you a custom kernel that has sd-ext support? Have you tried the latest LX CM11 ROM and kernel? Almost all custom kernels support ext4, it's just a matter of preference.
Sorry if I missed your point, hope I haven't misunderstood you.
Grof87 said:
If I get what you are saying, you just want someone to recommend you a custom kernel that has sd-ext support? Have you tried the latest LX CM11 ROM and kernel? Almost all custom kernels support ext4, it's just a matter of preference.
Sorry if I missed your point, hope I haven't misunderstood you.
Click to expand...
Click to collapse
Great! That's the point :good:
Now, I did not try LX CM11 ROM because I did not know which was the best ROM and Kernel for my mk16i and so
reading different threads I decided to install Ultimate HD ROM.
That's a good ROM but I did not know which kernel associate because it was not indicated in its dedicated thread
and furthermore, mk16i is a really specific smartphone with physical keyboard so I did not want to loose some important feature.
I will try to look at LX CM11 ROM but are you able to suggest a good kernel for my current ROM ?
I am honest, if possible I would not want to install all apps from the beginning... but if the reward is sensible, well I will do!
Thanks
XperiaPro55 said:
Great! That's the point :good:
Now, I did not try LX CM11 ROM because I did not know which was the best ROM and Kernel for my mk16i and so
reading different threads I decided to install Ultimate HD ROM.
That's a good ROM but I did not know which kernel associate because it was not indicated in its dedicated thread
and furthermore, mk16i is a really specific smartphone with physical keyboard so I did not want to loose some important feature.
I will try to look at LX CM11 ROM but are you able to suggest a good kernel for my current ROM ?
I am honest, if possible I would not want to install all apps from the beginning... but if the reward is sensible, well I will do!
Thanks
Click to expand...
Click to collapse
Asking for and suggesting best kernel/ROM is not allowed on xda.
http://forum.xda-developers.com/showthread.php?t=1969555
You'll just have to test them out yourself. You should check UHD ROM thread to see which kernels are compatible with that ROM. All CM ROMs have kernels inside the zip (boot.img). Hope you'll find what you are looking for!
Grof87 said:
Asking for and suggesting best kernel/ROM is not allowed on xda.
http://forum.xda-developers.com/showthread.php?t=1969555
You'll just have to test them out yourself. You should check UHD ROM thread to see which kernels are compatible with that ROM. All CM ROMs have kernels inside the zip (boot.img). Hope you'll find what you are looking for!
Click to expand...
Click to collapse
Hi, I know the rules.
I am asking if you can help me understand which ROM is ready for UHD cause, of course, I already read the post and found
different suggestions but regarding other models. That's the point, because Xperia Pro is a particular phone with physical keyboard for e.g.
and also looking at different kernels inside its dedicated thread I was not able to understand which kernel is already developed
and patched on ICS and there is features matrix.
Finally I need to know if, installing selected kernel, I will loose something or not
I am not interested and I am not asking "which is the best rom for my phone ?"
Bye
Q&A for [KERNEL] [I9300] [Samsung JB] Boeffla-Kernel 5.3/6.0 (08-07-2014)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
No sound during call
This might be one of the best kernels for the 4.4 roms out there but it has just one problem in my device : there's no sound during calls. This happens only when I have Boeffla , as soon as I flash another kernel the sound fixes. I have tried uninstalling Boeffla Config and running the kernel without it but it's the same. How to solve this ? Thank you.
eb6 said:
This might be one of the best kernels for the 4.4 roms out there but it has just one problem in my device : there's no sound during calls. This happens only when I have Boeffla , as soon as I flash another kernel the sound fixes. I have tried uninstalling Boeffla Config and running the kernel without it but it's the same. How to solve this ? Thank you.
Click to expand...
Click to collapse
Hi,
make sure your init.d folder does not contain left overs of other kernels.
Especially when you were on Agni Pure before, this is a known issue as it overwrites Boeffla-Settings in an incompatible way.
Andi
eb6 said:
This might be one of the best kernels for the 4.4 roms out there but it has just one problem in my device : there's no sound during calls. This happens only when I have Boeffla , as soon as I flash another kernel the sound fixes. I have tried uninstalling Boeffla Config and running the kernel without it but it's the same. How to solve this ? Thank you.
Click to expand...
Click to collapse
Lord Boeffla said:
Hi,
make sure your init.d folder does not contain left overs of other kernels.
Especially when you were on Agni Pure before, this is a known issue as it overwrites Boeffla-Settings in an incompatible way.
Andi
Click to expand...
Click to collapse
I had similar problem with sound. Just before writting here I realized that I flashed again Boeffla after testing different kernel. After cleaning - see above - issue disapperared.
Wrong section, delete.
kernel issue
hi good night i install the kernel today with the rom back-to-n00t- and when boot i lose my sdcard (internal) i uset a cwm touch as well and have a issue with that, i have to remove the kernel for keep my internal sdcard, some can help me?
Cwm touch comes with it's own kernel, so this proves it is not a kernel problem.
Must be something else, maybe a defective sd card...
Lord Boeffla said:
Cwm touch comes with it's own kernel, so this proves it is not a kernel problem.
Must be something else, maybe a defective sd card...
Click to expand...
Click to collapse
im i mean with de internal storage, i dont have a sd card chip at this momento, when try to get in on the sd into cwm touch and intal zip, say sdcard/0/ seems the kernel put the "/0" to my phone. before flashing the new cwm touch i used a TWR and trying to flash get a error on this kernel. some help?
thx
Hi Andi,
triangle away will work on QS-kk rom?
mahe. said:
Hi Andi,
triangle away will work on QS-kk rom?
Click to expand...
Click to collapse
I never tried it. I am not very sure Triangle Away is compatible with any S3 kk rom.
I would be very cautious to not end up in a brick.
I recall I purposely did not put native TriangleAway support into my 6.x series kernel, to not open up any risk here.
Andi
Lord Boeffla said:
I never tried it. I am not very sure Triangle Away is compatible with any S3 kk rom.
I would be very cautious to not end up in a brick.
I recall I purposely did not put native TriangleAway support into my 6.x series kernel, to not open up any risk here.
Andi
Click to expand...
Click to collapse
Andi,
could you please add above mentioned suggestion in op if not done already? i think this very good piece of information.
Hello.
In NIK60 ROM v.3.0 (4.4.4) I installed Kernel Boeffla 6 Beta 6 with the latest Boeffla Config V2 with Boeffla Config change the values and to reset the phone's settings Governor, the Governor's profile and Internal memory back to their default values pegasusq, standard and CFQ. The other parameters I've changed if maintained.
Where can be the problem? I have proven to Beta 5 and with different versions of Boeffla Config and the result is the same.
Sorry for my bad English.
Thank you
xileftld said:
Hello.
In NIK60 ROM v.3.0 (4.4.4) I installed Kernel Boeffla 6 Beta 6 with the latest Boeffla Config V2 with Boeffla Config change the values and to reset the phone's settings Governor, the Governor's profile and Internal memory back to their default values pegasusq, standard and CFQ. The other parameters I've changed if maintained.
Where can be the problem? I have proven to Beta 5 and with different versions of Boeffla Config and the result is the same.
Sorry for my bad English.
Thank you
Click to expand...
Click to collapse
Must have something to do with the rom.
It seems like
- either you have scripts init.d that overwrite the settings
- you have another app that resets this stuff again
- the rom start takes extremely long (you can give additional startup delay in boeffla-configs settings for a try)
Unfortunately there is no way to do a better diagnose without having your phone in hands.
But... there are reasons why I recommend going on pretty clean roms like JustArchis Port. There these kind of things do not happen.
Andi
Lord Boeffla said:
Must have something to do with the rom.
It seems like
- either you have scripts init.d that overwrite the settings
- you have another app that resets this stuff again
- the rom start takes extremely long (you can give additional startup delay in boeffla-configs settings for a try)
Unfortunately there is no way to do a better diagnose without having your phone in hands.
But... there are reasons why I recommend going on pretty clean roms like JustArchis Port. There these kind of things do not happen.
Andi
Click to expand...
Click to collapse
Just try to Blekota ROM 8.1 and the result is the same, previously had Blekota 8.0 and had no problem.
The install has been fully cleaned, wiping up the internal sd.
Init.d folder only has 2 files and 99SuperSUDaemon 85sqlite
Thank you.
xileftld said:
Just try to Blekota ROM 8.1 and the result is the same, previously had Blekota 8.0 and had no problem.
The install has been fully cleaned, wiping up the internal sd.
Init.d folder only has 2 files and 99SuperSUDaemon 85sqlite
Thank you.
Click to expand...
Click to collapse
I am sorry, but I have no time to try all sort of roms. That's what you users need to do.
I officially do not support the roms you mentioned, only Archiport. So, if all works, fine. But if not, it is like it is.
Especially on the 6.x kernel series I do give only very limited support as it is kinda inofficial and experimental kernel only.
If it worked fine on Blekota 8.0 and not on 8.1 anymore, it is quite obvious something changed which broke some functionality. But as said, I cannot support all roms around as my day only has 24 hours
Thanks for understanding
Andi
Ok, let's start writing in this Boeffla Q&A thread
zRam...for needing multitasking if not working that good...but which values???
I'm on stock 1 device 300mb and 80 swappiness....any other super better setting???
Tnx!
Sent from my Samsung Galaxy S3 GT-i9300 using TapaTalk2
PIRATA! said:
Ok, let's start writing in this Boeffla Q&A thread
zRam...for needing multitasking if not working that good...but which values???
I'm on stock 1 device 300mb....any other super better setting???
Tnx!
Sent from my Samsung Galaxy S3 GT-i9300 using TapaTalk2
Click to expand...
Click to collapse
WHEN (!) I use zram, I use 600 MB total size with 4 devices.
But I almost never use it, I am a lean user, I always close my apps with back button. So zRam is not required for me.
Andi
installed on a fresh V5 coming from a V2, changed nothing in the settings, works flawlessly. Smooth and fast, thanks man!
SHV E210K
I 'm using S3 SHV E210K and my phone don't boot when i flash boeffla kernel.
Do boeffla kernel support my phone?
Lame question maybe. Should I turn the S3 power saving feature on while running a power saving profile or is it useless?
Q&A for [MOD] Beats Audio, xReality, xLoud single zip
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
love it
Works perfectly on nexus 5, android l. I had to disable music fx to make it work.
How to install beats audio on gionee e6
I tried to install but it is already have DTS so phone is not starting
works and thanks genius
Running kk 4.4.3 asob everything works just fine made android backup just in case no bugs here bro thank you
I have xolo q700s official 4.4.2.. I have only rooted it.
No CWM or any installed.. Will it work for me.?
hi, how do i know this mod is working?
Send the download links bro
i want to install this mod but i m just searching for the link where to download from.........
someone plzz help me out
Merry Christmas!
Bhuri25 said:
i want to install this mod but i m just searching for the link where to download from.........
someone plzz help me out
Click to expand...
Click to collapse
Download from this link. Note: This project has been dropped. No further work will be done.
mamun152 said:
hi, how do i know this mod is working?
Click to expand...
Click to collapse
I guess you just have to feel it but do understand one thing, not everything will necessarily work. For example, it is possible that Beats and xLoud might work whereas xReality may not. This was just an example, if you're lucky enough even everything might be working.
Sandeepmishra37 said:
I have xolo q700s official 4.4.2.. I have only rooted it.
No CWM or any installed.. Will it work for me.?
Click to expand...
Click to collapse
If your stock recovery has an option saying "install zip from sd card" (or something similar) then you don't need a Custom recovery. If it doesn't have such an option you will need a custom ROM.
louis951 said:
Running kk 4.4.3 asob everything works just fine made android backup just in case no bugs here bro thank you
Click to expand...
Click to collapse
Your welcome.
Sorry for the late replies I didn't realize that my project became a Dev DB Project and that I had a Q&A section LOL
Q&A for [KERNEL][UNOFFICIAL BUILDS][JB/KK][Vx.43v76]DorimanX Test builds
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL][UNOFFICIAL BUILDS][JB/KK][Vx.43v76]DorimanX Test builds. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Flashing DorimanX kernel
Hi, I'm sure I'm going to appear like an idiot here, but I've been trying to flash the DorimanX kernel to my Galaxy s2, and I keep running into errors. My phone is running JB 4.1.2. I also am not 100% sure about the model number. If I go into the about section in settings, it says that it is a GT-I9100, but behind the battery, the sticker says GT-I9100T. I've installed CWM via odin, using the Jaboo kernel, and tried installing multiple varients of the DorimanX kernel. I've tried installing v10.66, v9.43, 8.43, and v7.46. Every time I have tried installing it, I always enter some sort of boot loop. With the 8.43 it goes to the Samsung splashscreen, and just keeps looping the splashscreen, and never starts up. Does anyone know what I am doing wrong? Any help would be very appreciated. Thanks.
TheFallen018 said:
Hi, I'm sure I'm going to appear like an idiot here, but I've been trying to flash the DorimanX kernel to my Galaxy s2, and I keep running into errors. My phone is running JB 4.1.2. I also am not 100% sure about the model number. If I go into the about section in settings, it says that it is a GT-I9100, but behind the battery, the sticker says GT-I9100T. I've installed CWM via odin, using the Jaboo kernel, and tried installing multiple varients of the DorimanX kernel. I've tried installing v10.66, v9.43, 8.43, and v7.46. Every time I have tried installing it, I always enter some sort of boot loop. With the 8.43 it goes to the Samsung splashscreen, and just keeps looping the splashscreen, and never starts up. Does anyone know what I am doing wrong? Any help would be very appreciated. Thanks.
Click to expand...
Click to collapse
Wrong device for this kernel..or viceversa[emoji3]
You have i9100T
This kernel is for i9100
Dorimanx kernel
Any links for 4.4.4 stable dorimanx kernel. I cant find them?
geoff10 said:
Any links for 4.4.4 stable dorimanx kernel. I cant find them?
Click to expand...
Click to collapse
Ther aren't any links mate....head over to beta thread and read....than grab it from OP....
Hello everyone,
I'm new to Dorimanx kernel and i'm happy with the stability and battery usage.
But I have one question : does this kernel has FM Radio support? Because I use Omni 4.4.4 (11-2014) and Dori .44v006 and I can't get to work Spirit2 FM one my S2. The app starts, I give it root permission then Spirit get Stuck at "Please wait" ... Some of you use Spirit here?
Now there is a new free version of Spirit2 for everyone.
Thanks
LeBourrin said:
Hello everyone,
I'm new to Dorimanx kernel and i'm happy with the stability and battery usage.
But I have one question : does this kernel has FM Radio support? Because I use Omni 4.4.4 (11-2014) and Dori .44v006 and I can't get to work Spirit2 FM one my S2. The app starts, I give it root permission then Spirit get Stuck at "Please wait" ... Some of you use Spirit here?
Now there is a new free version of Spirit2 for everyone.
Thanks
Click to expand...
Click to collapse
go with v005 it's better
...as per Spirit FM ....it was working for me...but I haven't tryed it lately....but I will....soon...
rkoby13 said:
go with v005 it's better
...as per Spirit FM ....it was working for me...but I haven't tryed it lately....but I will....soon...
Click to expand...
Click to collapse
Copied from my thread:
If this is the kernel config file: https://github.com/dorimanx/Doriman...er-maliv3/arch/arm/configs/dorimanx_defconfig
It has:
CONFIG_FM_RADIO=y
CONFIG_FM_SI4709=m
I presume that's the Samsung Silicon Labs driver, and not the V4L driver.
Changing it to "CONFIG_FM_SI4709=y" may be better, "=m" makes it a module that needs to be loaded.
Spirit1 has about 5 different ways to load the module, LOL. But Spirit2 does not because pretty much all kernels in the last year at least did not use a module for FM; they were built right into the kernel.
We have better as it possible as well with SGS 2!
I'm totally agree with you opinion! That's right and also i haven't reason to buy a new phone right now! Just waiting for a few times to got a stable - one release of lollipop and be patient / happy at the same time!!!
I had a question, i want to learn about it, but i can not really find info.
I am using the latest Slimsaber built and the dorimanx kernel.
When you flash the kernel, at the first boot it does some optimalizations to the phone. What does it do?
And second question is, ( after i delted the contacts app ) i went to the phone options and chose to do a factory reset.
But this time it booted, it does not do any optimalizations or something but i still do have the same kernel obv.
Do i need to reflash the kernel after a restore?
Sorry for so many questions..
Hi im on spirit rom 1.7 what version should i use? And what version is stable on spirit rom?
Because the battery life on spirit rom stck kernel is suck it drains so fast. Anyone help would be great
wanna know same thing
fred07123 said:
Hi im on spirit rom 1.7 what version should i use? And what version is stable on spirit rom?
Because the battery life on spirit rom stck kernel is suck it drains so fast. Anyone help would be great
Click to expand...
Click to collapse
tirajon said:
wanna know same thing
Click to expand...
Click to collapse
I don't know how 10.44v005 would perform on Spirit Rom by @Nico60 ....but I must say i've got 170+ hrs of uptime right now and if there wouldn't be an update foe me....I wouldn't even think of rebooting my device.....yes....it's that much stable.....but....you need to give it a go and see for yourself....that's the only way....
Enjoy
005 runs stable on Spirit
Sent from my blakk Bacon
Spaulding89 said:
005 runs stable on Spirit
Sent from my blakk Bacon
Click to expand...
Click to collapse
Ma i know your profile on dori v005?
Anyone here using slide2wake feature? Is there a battery drain in that feature?
fred07123 said:
Anyone here using slide2wake feature? Is there a battery drain in that feature?
Click to expand...
Click to collapse
I don't use it....exactly beacause it's causing battery drain....it drains battery for approx 5% more...if enabled....it's neat feature but costs a lil' bit more battery juice
Ext4 mount problem
My sdcard0 is in ext4 and wouldn't mount with this kernel. By searching a bit in the thread I could see that I was not alone in this case.
However I found that I could still mount the partition manually so I hacked a little script in /etc/init.d to mount sdcard0 on boot and it seems to work for now.
I use this build: Kernel_Dorimanx-V10.44v007-cybnt-[11-49]-[26-12]-JB-SGII-PWR-CORE
on CM11 - M2 for i9100
Hello, I wanted 2 roms in my device, 4.1.2 and another Lolipop, what version of Dorimanx recommend me?
Regards
Very thanks for the answer to nobody.
Regards.
Q&A for [ROM][5.1.1_r6] SlimLP - i777 [UBER][UNOFFICIAL] beta0.2
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.1.1_r6] SlimLP - i777 [UBER][UNOFFICIAL] beta0.2. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Can I Use Cyril's Slim Kernel on cm-12.1-20150801 build. The Current Kernel is not let do anything. I cant Wipe or flash zips.
fairmount97 said:
Can I Use Cyril's Slim Kernel on cm-12.1-20150801 build. The Current Kernel is not let do anything. I cant Wipe or flash zips.
Click to expand...
Click to collapse
The slim kernel won't boot the cm12.1 builds.
cyril279 said:
The slim kernel won't boot the cm12.1 builds.
Click to expand...
Click to collapse
Are you have any suggestion? Better than stock cm kernel..
Which build of Offical Cm rom is the most stable rom?
fairmount97 said:
Are you have any suggestion? Better than stock cm kernel..
Which build of Offical Cm rom is the most stable rom?
Click to expand...
Click to collapse
I don't use CM, so I don't have any experience with what builds may be more stable. I know that Lanchon has done some CM kernel work recently, and perhaps the shift kernel is up to par, but I haven't tried any of them. I don't run CM.
-Cyril
cyril279 said:
I don't use CM, so I don't have any experience with what builds may be more stable. I know that Lanchon has done some CM kernel work recently, and perhaps the shift kernel is up to par, but I haven't tried any of them. I don't run CM.
-Cyril
Click to expand...
Click to collapse
Which rom do you using now? Which one do you suggest? I don't want bugs..
fairmount97 said:
Which rom do you using now? Which one do you suggest? I don't want bugs..
Click to expand...
Click to collapse
What am I running? SlimLP. (<-- NOT bug-free)
Which do I recommend? This is a loaded question, which has no clear answer.
It's all about personal preference. Different firmwares will bring you different experiences with battery-life, features, tweakability and so-on. I like the minimal/lightweight approach, and so am a huge fan of slimroms firmwares.
If you want something close to stock, but debloated and fast, then I suggest trying cooked or ShoStock.
All of the 5.x firmwares for the s2 have the outgoing call bug, so I wouldn't consider any of them "bug free"
All of the 4.4.4 firmwares are pretty good (SlimKat for the win) and are very reliable.
Other users may have other recommendations, but you'll have to try them for yourself to know for sure what you like, and what you don't.
Happy flashing,
-Cyril
cyril279 said:
What am I running? SlimLP. (<-- NOT bug-free)
Which do I recommend? This is a loaded question, which has no clear answer.
It's all about personal preference. Different firmwares will bring you different experiences with battery-life, features, tweakability and so-on. I like the minimal/lightweight approach, and so am a huge fan of slimroms firmwares.
If you want something close to stock, but debloated and fast, then I suggest trying cooked or ShoStock.
All of the 5.x firmwares for the s2 have the outgoing call bug, so I wouldn't consider any of them "bug free"
All of the 4.4.4 firmwares are pretty good (SlimKat for the win) and are very reliable.
Other users may have other recommendations, but you'll have to try them for yourself to know for sure what you like, and what you don't.
Happy flashing,
-Cyril
Click to expand...
Click to collapse
thanks. One more question and sorry for that ı'm asking too much...
What're think about overclocked stock rom? I'm using 1.4 Ghz overclocked really stable stock rom. I cleaned all At&t apps.
I don't have any experience overclocking.
My impression is that it's best use is to get the device to perform better at cpu-intense actions, and I use my devices primarily for email, texting, music playing, or other simple utility apps -nothing that benefits from over-clocking.
My favorite stock experience was using ShoStock (with the suggested Jeboo kernel). Clean, fast, & reliable.
-Cyril
fairmount97 said:
thanks. One more question and sorry for that ı'm asking too much...
What're think about overclocked stock rom? I'm using 1.4 Ghz overclocked really stable stock rom. I cleaned all At&t apps.
Click to expand...
Click to collapse
Hi all!
Does anyoune know how to switch off the cell broadcast/public alerts (see thr screenshot) . It is very annoying for me, but i can't find the toggle (though in previous roms it was under messages settings)
Sent from my SGH-I777 using XDA Free mobile app
Platcent said:
Hi all!
Does anyoune know how to switch off the cell broadcast/public alerts (see thr screenshot) . It is very annoying for me, but i can't find the toggle (though in previous roms it was under messages settings)
Sent from my SGH-I777 using XDA Free mobile app
Click to expand...
Click to collapse
It's usually under Settings > More > Emergency Broadcast (or something like that).
SteveMurphy said:
It's usually under Settings > More > Emergency Broadcast (or something like that).
Click to expand...
Click to collapse
Unfortunately there is nothing uder "More" settings. Any other ideas?
Sent from my SGH-I777 using XDA Free mobile app
Platcent said:
Unfortunately there is nothing uder "More" settings. Any other ideas?
Sent from my SGH-I777 using XDA Free mobile app
Click to expand...
Click to collapse
You can always use Titanium Backup Pro (or an equivalent), and freeze 'Cell Broadcast'.
Overcloclocking SlimLP - i777
Really love this ROM, nice work. Completely renewed my S2. However, the S2 is showing it's age and feels a bit slow with some apps.
Is anybody overclocking their S2? How would I go about doing that? What kernels would work with this ROM?
Best
SteveMurphy said:
You can always use Titanium Backup Pro (or an equivalent), and freeze 'Cell Broadcast'.
Click to expand...
Click to collapse
Thank you!
Titanium helped!
Sent from my SGH-I777 using XDA Free mobile app
Hi all,
I am currently running SlimKat 4.4.4 and would like to try this ROM. Thanks a lot for the amazing work put into this!
I read somewhere that a higher version of recovery is needed to flash LP roms. Do I have to get CWM Recovery v6.0.4.3 (or higher) first or can I flash directly from TWRP v2.7.1.0?
Best,
auppal said:
Hi all,
I am currently running SlimKat 4.4.4 and would like to try this ROM. Thanks a lot for the amazing work put into this!
I read somewhere that a higher version of recovery is needed to flash LP roms. Do I have to get CWM Recovery v6.0.4.3 (or higher) first or can I flash directly from TWRP v2.7.1.0?
Best,
Click to expand...
Click to collapse
Any up to date 4.4.4 recovery should flash L firmware without issue. I can vouch for twrp. I don't use philz or cwm.
Happy flashing
-Cyril
Hi all,
I want to ask if its only me or its an known issue.
On LP I started to suffer from memory lack. All apps are being installed on to internal memory though I have a working SD card (both internal and external).
I have to move istalled apps to internal SD tofree up some space but this is not much help.
For example I cant isntall big games that have to download additional cash (Jurasic park for example) because I dont have enough space.
Is therу any way to install apps to the SD card at once?