This is build nightly port from build nightly for i605 by @TheBr0ken, first thank to him.
This thread only shared link again for every one and it only for any one need test because it still not yet stable (for i605)
Don't forget replace/edit file updater-script before flash it (can use file attachment below).
Link rom :
http://drdevs.com/devs/teamliquid/Nightly/Note_2_Verizon/LS-LP-v4.0-2014-12-13-liquid_i605.zip
Note : i already test it.
after install, reboot finish->wizad setup (keyboard auto show) enable wifi first then skip anyway.
next step : go to phone dial *#*#4636#*#* ->testing>phone information>LTE/GSM/CDMA auto (PRL) waiting the moment is data service network mobile show work ok.
not work : receive incoming call, NFC (maybe)...
Good basedband fix??
windows8k said:
Good basedband fix??
Click to expand...
Click to collapse
yep, fixed baseband for CDMA i605> receive in call not work, waiting build for t0lte
Where did you find this from? I have i605 and just wanted to follow it myself
This would be nice it could be ported to the I317 / or N7105 variants. I love using the LS 3.2 with a Nice Battery life.
Voyebanm said:
This would be nice it could be ported to the I317 / or N7105 variants. I love using the LS 3.2 with a Nice Battery life.
Click to expand...
Click to collapse
T0lte is N7105 so yeah go ahead
lowridincrew said:
T0lte is N7105 so yeah go ahead
Click to expand...
Click to collapse
I know that, but incoming calls dont work like the other versions now work for these variants.
Thanks anyway
http://drdevs.com/devs/teamliquid/Nightly/Note_2_t0lte/LS-LP-v4.0-2014-12-19-liquid_t0lte.zip
Site tolte upload.
Screenshota please? And function list is also welcome
http://www.drdevs.com/devs/teamliquid/Nightly/Note_2_t0lte/
12 23 update ..
Issues flashing 23/12 build with TWRP
Hi,
I tried flashing the 23/12 build yesterday using the TWRP 2.7.0.2 & IT didn't get through.... I checked file for Md5sum for both the ROM & gapps and they are not bad downloads....I never had any issues with the TWRP before for flashing AOSP or TW build of KitKat roms..
Anyone can suggest me some alternatives?
rojajimmy said:
Hi,
I tried flashing the 23/12 build yesterday using the TWRP 2.7.0.2 & IT didn't get through.... I checked file for Md5sum for both the ROM & gapps and they are not bad downloads....I never had any issues with the TWRP before for flashing AOSP or TW build of KitKat roms..
Anyone can suggest me some alternatives?
Click to expand...
Click to collapse
I suggest you use PHILZ Touch recovery-This is the one I use ans haven't had a problem.
http://forum.xda-developers.com/galaxy-note-2/development-n7105/recovery-t2849091
Sometimes TWRP can be tempermental. You can also update TWRP I believed their on version 2.8 now
Anyone knows if the dark UI can be disabled?
Binary_File said:
Anyone knows if the dark UI can be disabled?
Click to expand...
Click to collapse
why? lol
@sumer1 thank you mate... I will try in a bit using TWRP 2.8.1.0 (latest for t0lte again,) ..... Hopefully it will be sorted.... Will keep you posted....
Also I hope there are no major bugs so far.... Except the ones that exist on other lp ROMS....
rojajimmy said:
@sumer1 thank you mate... I will try in a bit using TWRP 2.8.1.0 (latest for t0lte again,) ..... Hopefully it will be sorted.... Will keep you posted....
Also I hope there are no major bugs so far.... Except the ones that exist on other lp ROMS....
Click to expand...
Click to collapse
TWRP updated to 2.8.3.0 and installed this rom perfectly as well as the other L-pop roms. Link below:
http://forum.xda-developers.com/showthread.php?t=1966105
how do you install apk's in liquidsmooth lollipop rom? it says file cannot be opened when i install apk. also file manager is missing.
Hey @Pr4MetheuS for T0lte I still see 2.8.1.0 only on the official TWRP page ....once I select the T0LTE device. on there I get all the Note 2 options. I then select N7105 and it shows 2.8.1.0 latest. I guess I well wait for official CM12 release. Thankfully Android OS has matured to a level where I can live with just one previous version...
I have a AOSP (slimkat) ROM and it is 4.4.4 so all good...
Thanks for the help.
rojajimmy said:
Hey @Pr4MetheuS for T0lte I still see 2.8.1.0 only on the official TWRP page ....once I select the T0LTE device. on there I get all the Note 2 options. I then select N7105 and it shows 2.8.1.0 latest. I guess I well wait for official CM12 release. Thankfully Android OS has matured to a level where I can live with just one previous version...
I have a AOSP (slimkat) ROM and it is 4.4.4 so all good...
Thanks for the help.
Click to expand...
Click to collapse
t-mobile GN2 is updated to 2.8.3.0 and should be fine to use with 7105. Of course, if your phone blows up or starts a nuclear war, it's not my fault.
windows8k said:
http://www.drdevs.com/devs/teamliquid/Nightly/Note_2_t0lte/
12 23 update ..
Click to expand...
Click to collapse
hi! this may sound silly but how do you install apks in LS lollipop? when i open an apk it say cannot open file. i have flashed the 12-23 version already, no luck. my device is n7105 on n7105xxufnd3 and i have philz 6.48.4, the latest i can find. tnx!
Related
Downloads
Downloads link
Installation instructions
Same as for FLO; download the zip from the "Downloads" section, and follow the official CM instructions.
http://wiki.cyanogenmod.org/w/Install_CM_for_flo
Changelog
2013.09.21 -- Fix USB OTG storage and duplicate SMS notifications.
2013.09.18 -- Now based on AOSP JLS36C
2013.09.15 -- First port working
Source repositories
Github
Patch required for CM-10.2
Building
To build them, just check out the CyanogenMod sources (version 10.2), put my github repo in devices/asus/deb, make sure you have the patch in the second link in device/asus/flo repo. Then, just follow the build instructions as you would for "flo", but start with breakfast deb instead of breakfast flo.
You'll need CyanogenMod flashed already to get the proprietary blobs in the right places; there's a couple of files in /system/etc/ that don't copy automatically when running get-prebuilts.sh
Notes
As far as I can tell, everything is working. It seems to crash much less than the stock firmware I've been running prior.
I'm in the process of submitting this upstream to the official CyanogenMod guys, but would love to get more testers in the meantime.
I'll make more recent builds as I have time (or I'll set up some type of CI, if I can get a server somewhere...)
XDA:DevDB Information
CyanogenMod (CM10.2) port to Nexus 7 (2013) LTE, a ROM for the Nexus 7 (2013)
Contributors
kelvie
ROM OS Version: 4.3.x Jellybean
Based On: CyanogenMod 10.2
Version Information
Status: Testing
Created 2013-09-17
Last Updated 2013-09-21
Sweetness thanks! My N7 LTE doesn't get here till tomorrow but I know what rom I'm loading as soon as I get it .
Has this been tested.?
maconsultant said:
Has this been tested.?
Click to expand...
Click to collapse
I run it on my N7, which I use daily (with a mobile data plan, and wifi).
Awesome thanks for the quick response....
Sent from another Nexus..
7 LTE...
running ok on my new nexus 7 lte....
thanks !
Can anyone provide a flashable ZIP for deb?
Thanks in advance
janjansen85 said:
Can anyone provide a flashable ZIP for deb?
Thanks in advance
Click to expand...
Click to collapse
?
Theyre right in the first post...second line
http://forum.xda-developers.com/devdb/project/?id=678#downloads
Downloading now. Latest 9-18. Plan to run it daily and report any hiccups.
umbra6 said:
?
Theyre right in the first post...second line
http://forum.xda-developers.com/devdb/project/?id=678#downloads
Click to expand...
Click to collapse
Post has just been updated.
There weren't any downloads this morning.
janjansen85 said:
Post has just been updated.
There weren't any downloads this morning.
Click to expand...
Click to collapse
I put the link there for visibility... it's always said to click "Downloads" above.
9-18 won't flash. Gives an error in ro.build . Downloading 9-15 now.
NOMster said:
9-18 won't flash. Gives an error in ro.build . Downloading 9-15 now.
Click to expand...
Click to collapse
which recovery are u using ?
Cwm touch ill try twrp before giving up
NOMster said:
9-18 won't flash. Gives an error in ro.build . Downloading 9-15 now.
Click to expand...
Click to collapse
NOMster said:
Cwm touch ill try twrp before giving up
Click to expand...
Click to collapse
...strange..... twrp 2.6.3.0 worked for me
janjansen85 said:
Can anyone provide a flashable ZIP for deb?
Thanks in advance
Click to expand...
Click to collapse
for future reference, see attached.
Got this up and running.. running smooth.. only issue is that it won't connect to Verizon LTE.. it shows that it's Connected but the internet doesn't work..
Verizon LTE was working fine on stock rom
edgie168 said:
for future reference, see attached.
Click to expand...
Click to collapse
thanks for clarification!
nexttonomy said:
Got this up and running.. running smooth.. only issue is that it won't connect to Verizon LTE.. it shows that it's Connected but the internet doesn't work..
Verizon LTE was working fine on stock rom
Click to expand...
Click to collapse
Mine arrives tomorrow. Anyone have Verizon working with this rom?
Sent from my SCH-I545 using Tapatalk 4
ilpolpi65 said:
...strange..... twrp 2.6.3.0 worked for me
Click to expand...
Click to collapse
Yep. Twrp did fine with it. Very smooth. No problems so far.
Sent from my Nexus 7 using xda premium
Cyanogenmod 11 Unnofficial build based on Android 4.4 (KitKat)WORK IN PROGRESS!
This is DEVELOPMENT thread.
Discussion thread is here, any questions not releted to development will be deleted.
Download:
ROM (10.12.2013): http://d-h.st/6pF
core google apps (17.50 MB): http://d-h.st/PbA
Issue tracker
Changelog:
10.12.2023
Android 4.4.1
Sync with latest CM sources
Improvements in camera [Video preview is wrong dimension right now]
18.11.2023
Fix "move to sd" function
Fix installing application to sd
Fix google vp 8/9 media decoder
Upstream synced
17.11.2013
Video recording fixed
fixed some sd mounting errors
CM sources updated
Battery handling improved
15.11.2013
Battery level is fixed
Brightness level is fixed
CWM recovery SD mount is fixed
CM sources updated
graphical glitches are fixed
Click to expand...
Click to collapse
Known issues:
Some applications wont work
Source:
kernel:
https://github.com/CyanogenMod/android_kernel_samsung_smdk4412/tree/cm-11.0
device:
https://github.com/cyanogenmod/android_device_samsung_i9100/tree/cm-11.0
https://github.com/CyanogenMod/android_device_samsung_galaxys2-common/tree/cm-11.0
How to install:
You need CWM recovery 6.0.4.4 at least
Perform full wipe (system, data, cache)
Install ROM and GAPPS from links provided in Download section
Wipe Dalvik Cache
Reboot into system
Thanks all to helping!
Wow Wayland, nice to see you here. I've been loving your work in the Galaxy Ace days.
Downloading now, gonna test it!
KcLKcL said:
Wow Wayland, nice to see you here. I've been loving your work in the Galaxy Ace days.
Downloading now, gonna test it!
Click to expand...
Click to collapse
Will wait for ur review... a detailed one...so we finally have our first 4.4 rom...
Thanks alot @Wayland_ACE
Wow.!! KitKat for i9100.. Never expected it to release so fast..
Thanks for porting..
Will test and report..
Small note about bluetooth is added to first post
GApps for 4.4 ??
guru_iyer said:
GApps for 4.4 ??
Click to expand...
Click to collapse
I think it's possible to use last version of 4.3.0
These are the 4.4 gapps from PA team
They should work bt m nt sure
http://www.androidfilehost.com/?fid=23212708291676422
Almost 200mb
These one from the slim rom team
http://d-h.st/EIM
108mb
Does this work? Does recovery work or is it unbootable?
BTW Thank you very much for this been waiting for days!
Shillopellos9 said:
Does this work? Does recovery work or is it unbootable?
BTW Thank you very much for this benn waiting for days!
Click to expand...
Click to collapse
I'm not at home now, therefore I cant even test it I think it should, but... ))
I'm not able to install update via CWM. It gives me error (status 7)
Okay. I will test first without flashing GApps..
And then try after flashing GApps..
GREAT!! Wayland_ACE is here!!
:good:
This man is a genius!
Thanks for all your work in our old Galaxy Ace and thanks for bringing us the new kik kat to our Galaxy S2!
ALL THE BEST MATE!
Renegeits said:
I'm not able to install update via CWM. It gives me error (status 7)
Click to expand...
Click to collapse
Maybe corrupt download. Try downloading again..
downloading now
Renegeits said:
I'm not able to install update via CWM. It gives me error (status 7)
Click to expand...
Click to collapse
Make sure u are having a newer recovery version.. probably greater than 6037
If u are on a 4.1.2 rom.
I suggest first flash 4.2/4.3 then try flashing cm11
Renegeits said:
I'm not able to install update via CWM. It gives me error (status 7)
Click to expand...
Click to collapse
Format your sd, or try downloading the rom againg, maybe your download file is corrupted or your sdcard...then try it again
Anyone know what's work?
Enviado de meu GT-I9100 usando Tapatalk
Nice to see another S2 release (first exynos). Downloading right now... Thanks a bunch. :thumbup:
Slim-4.3.1|Devil|i9100¬Tapa2
It does not boot yet I hope to fix it today
Main thread: OpenPDroid patches for CyanogenMod 11
WARNING: OpenPDroid is not compatible with ART for now. disable ART before flashing. enabling ART will cause the device to fail to boot. if you enabled ART and are unable to boot, flash official CyanogenMod temporarily to be able to fix (will cause privacy leaks). or if you have ADB access in android or recovery, you can disable ART by using setprop or editing a file.
these are i9100 builds of CyanogenMod 11 patched with OpenPDroid. find them here.
update: releases will now be distributed as overlays to the official CyanogenMod snapshots. first flash the official "M" snapshot corresponding to the OpenPDroid overlay you want to flash, then flash the overlay.
update: i have published an OpenPDroid overlay for the i9100 build of CM 10.1.3 here (made with old Auto-Patcher).
update: device-specific builds are being phased out in favor of the generic overlays. please refer to this post.
note: OpenPDroid does not affect the recovery nor the kernel, you can use whatever you want.
CM11-M6 broke OpenPDroid patches, so i forked OpenPDroid to restore compatibility, fix several bugs and clean up the code. sources are here.
XDA:DevDB Information
CM11-OpenPDroid-i9100, ROM for the Samsung Galaxy S II
Contributors
Lanchon
ROM OS Version: 4.4.x KitKat
Based On: CyanogenMod
Version Information
Status: Abandoned
Created 2014-07-16
Last Updated 2014-10-08
rom is uploading now, please wait a bit...
Features and screenshots mate
george_shudi said:
Features and screenshots mate
Click to expand...
Click to collapse
lol
google openpdroid and pdroid
Some screenshots and battery life will be welcome.
Thanks, will try soon .
sorry! i just found out that Dropbox suspended my public links due to too much traffic, i didn't know this could happen. i'll arrange an alternative asap.
danielk68 said:
Some screenshots and battery life will be welcome.
Click to expand...
Click to collapse
this is just nightly CM11 with openpdroid! screenshots and battery are exactly like CM's.
mate your roms are not working ,, even ur links are not working anymore.
george_shudi said:
mate your roms are not working ,, even ur links are not working anymore.
Click to expand...
Click to collapse
lol did you even read my previous to last post?
Lanchon said:
lol did you even read my previous to last post?
Click to expand...
Click to collapse
yes i did .. i have downloaded ur roms since today morning and i've flashed them but none of them are working.
george_shudi said:
yes i did .. i have downloaded ur roms since today morning and i've flashed them but none of them are working.
Click to expand...
Click to collapse
ok thanks. i only posted one rom for the i9100. are you sure you didnt flash one of the nexus 5 images? they have hammerhead on the filename.
Lanchon said:
ok thanks. i only posted one rom for the i9100. are you sure you didnt flash one of the nexus 5 images? they have hammerhead on the filename.
Click to expand...
Click to collapse
no hammerhead won't accept to flash ... i've flashed the one one with the date 16/7/2014 and done flashing then reboot but nothing happened just black screen.. i'm using Biftor slim rom now ... i just want to report ur rom to u.
george_shudi said:
no hammerhead won't accept to flash ... i've flashed the one one with the date 16/7/2014 and done flashing then reboot but nothing happened just black screen.. i'm using Biftor slim rom now ... i just want to report ur rom to u.
Click to expand...
Click to collapse
ok thank you. i dont have an i9100 so i can't test. that's why this rom is not in ALPHA but TESTING stage. i pulled the blobs from a non-local friend's phone over VPN and built. but i am running the hammerhead version and it works just fine (and so does openpdroid). i don't know why it may not be working. maybe that CM's nightly is bad. maybe there's something bad with my building (i strongly suppose nothing's wrong with openpdroid). maybe you didn't wipe or the download was busted. (there is *no* need to wipe coming from CM11.) if someone else confirms i will sync and rebuild and maybe build without patching to see if the output works. thank you!
Dropbox error 509
matias6142 said:
Dropbox error 509
Click to expand...
Click to collapse
files are now live again, sorry for the outage!
Lanchon said:
files are now live again, sorry for the outage!
Click to expand...
Click to collapse
images i don't see
new build is up!!!
this time i reproduced the official M8 snapshot, so it should be more stable. enjoy!
Lanchon said:
new build is up!!!
this time i reproduced the official M8 snapshot, so it should be more stable. enjoy!
Click to expand...
Click to collapse
the package is bad.
chuangdi said:
the package is bad.
Click to expand...
Click to collapse
crap!!! can you please describe in more detail?
i don't have an i9100, so i havent tested this build.
EDIT: i had a friend with an i9100 remotely connect to to my VPN, then had him enable root adb over net, then i picked the blobs from his phone with the standard script. there were no errors reported. maybe something went wrong???
2ND EDIT:
i think i know what can have gone wrong. he's running CM but infected's CM10.2 modded build. maybe i need to pick the blobs from someone running standard CM11.
does anybody running "stock" CM11 want to help? i'd need brief remote adb access. i think root is required to pick the blobs, but not sure.
Introduction
I'm not really into writing long elaborate OP posts, so here it goes. This is an AOSP compiled, flashable ROM. This ROM is fast and smooth, it is not bloated with useless features. Lustrous ROM has features being added that make it even more useful. You need the 4.04 bootloader! I put a lot of work and love into this rom, if you like it show me some support by donating!
Downloads
ROM Download: Click here!
SuperSU: I'm using 2.40 found Here
First Time Install
Put the file onto your Internal Storage/USB-otg
Reboot into Recovery (CWM/TWRP)
"wipe data/factory reset"
"install zip" -> "install zip from sdcard" -> choose the .zip and confirm (Optional: Add the other zip to flash... TWRP Only I believe)
"Clear cache/bla bla bla"
Flash Gapps
"Clear cache/bla bla bla"
Reboot
first boot may take up to 10 minutes
Features
RRO built in (for Layers)
Super smooth
OTA Updates
Build.prop edits for stability and speed
Super close to stock AOSP
stock kernel
BUGS
I am not sure of any bugs, haven't come across any. If you find some let me know and I'll get it fixed right away!
Credits
Thanks to @sykopompos for being my mentor and helping me out with a lot of things
Thanks to @scrosler for some tidbits and ideas
Thanks to @Chainfire for root
Thanks to the Simple AOSP team for the new gapps
Disclaimer: I am not responsible for anything that may happen to your device, yourself or your family. Flash at your own risk!
XDA:DevDB Information
[ROM] [5.1.1_r1] [Deb]Lustrous Lollipop for Nexus 7 (2013) LTE, ROM for the Nexus 7 (2013)
Contributors
skiman10
ROM OS Version: 5.1.x Lollipop
Based On: AOSP
Version Information
Status: Beta
Created 2014-11-08
Last Updated 2015-06-02
Reserved
Reserved
Thanks for posting. Will update you after I install the ROM
Sent from my Nexus 7 2013 LTE using XDA Premium 4 mobile app
Sweet thanks. Downloading, going to give it a spin.
And yep, that SuperSU is the latest.
Thx @skiman10 will Test it in the evening.
@skiman10 Is this an updated permissive boot image?
great many thanks for your work! Finally lollipop has come to DEB!
Thanks for this ROM. Finally can use android 5.0 on my deb nexus 7.. Successfully flashed this and so far so good. No problem or force close yet. Haven't tried with sim. Everything's run smoother now.
I can confirm that the mobile data is working however I lost my TWRP recovery after flashing it
Sent from my Galaxy Nexus using XDA Premium 4 mobile app
Everything's working great except Earth and Google Maps, even if the location is ON in high accuracy mode.
Where do i get the 4.0.4 Bootloader for DEB? I only found it for FLO...
mkretzer said:
Where do i get the 4.0.4 Bootloader for DEB? I only found it for FLO...
Click to expand...
Click to collapse
Flash the FLO bootloader. It's OK.
is it only working as primary via multiRom recovery?
I installed it as secondary and it failed to boot.
Google+ still missing for me here
Just finished booting.
Root is no-go for me (says binaries not installed despite having installed supersu zip).
Gonna see if I can tinker around with it to make it work, but for now no root for me.
jayfallen said:
is it only working as primary via multiRom recovery?
I installed it as secondary and it failed to boot.
Click to expand...
Click to collapse
That is an affirmative.
Also after you install it as primary, you'll need to install a kexec kernel to be able to boot to your other (now secondary) rom.
ElementalX 3.00 should work fine for that.
Ambious said:
Just finished booting.
Root is no-go for me (says binaries not installed despite having installed supersu zip).
Gonna see if I can tinker around with it to make it work, but for now no root for me.
That is an affirmative.
Also after you install it as primary, you'll need to install a kexec kernel to be able to boot to your other (now secondary) rom.
ElementalX 3.00 should work fine for that.
Click to expand...
Click to collapse
root does not work
on this core
I flashed my deb to stock 4.4.4, installed twrp, followed all instructions in op, and I cannot root. Thus I second another user's experience with root not working/SuperSU saying there are no binaries installed. I did install the supersu zip in twrp.
Also can't install Google+ neither from Market nor APK.
Fixed by flashing newer gapps package found here.
hhairplane said:
@skiman10 Is this an updated permissive boot image?
Click to expand...
Click to collapse
I might have to update the boot.img more, I'm pretty sure it is in permissive mode right now. I'll check that out right now.
BladeRider said:
I can confirm that the mobile data is working however I lost my TWRP recovery after flashing it
Sent from my Galaxy Nexus using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hmmm you shouldn't have lost your recovery.... I should have turned that off. Let me look. Also you still rock a Galaxy Nexus? Respect.
florynn2003 said:
Everything's working great except Earth and Google Maps, even if the location is ON in high accuracy mode.
Click to expand...
Click to collapse
Ok so GPS is a no go. Got it
hhairplane said:
Google+ still missing for me here
Click to expand...
Click to collapse
What gapps did you flash?
DeathmonkeyGTX said:
I flashed my deb to stock 4.4.4, installed twrp, followed all instructions in op, and I cannot root. Thus I second another user's experience with root not working/SuperSU saying there are no binaries installed. I did install the supersu zip in twrp.
Click to expand...
Click to collapse
I'll look into root right now. I might have missed something in the bootloader
Good morning everyone! I'm awake and ready to smash bugs!
]Hi all, i have installed the Mokee official android 5.0 release for Htc one max T6 international .Flash it with TWRP 2.8.4.0 .For google apps use gapps-lp-20150222-signed . Everything works fine. Have installed also the htc camera apk and the htc gallery without problems. Good job. Try it, very stable.
Even better, received another update release. Super !
Hy all, after 4 days of use, must say that this rom is very very stable, without reboots, the best rom i tried. GOOD job.
It's stable and very fast. Tried installing HTC camera and gallery, they get installed but they crash. This is a great ROM.
Do you have link ?
Sent from my Demon Dust using XDA Free mobile app
brossma1 said:
Do you have link ?
Sent from my Demon Dust using XDA Free mobile app
Click to expand...
Click to collapse
http://bit.ly/1Okpf6z :silly:
First link
iJohnny said:
It's stable and very fast. Tried installing HTC camera and gallery, they get installed but they crash. This is a great ROM.
Click to expand...
Click to collapse
I have installed htc camera 6.70.858966 downloaded from apk mirror and the gallery 9.02.850719
The link for the rom is http://download.mokeedev.com/opxupy
The rom don't have issues, they can be caused from installing not compatible softwares
I wasn't able to install... It hung on this screen
I have installed the international release ( not nightly VZW as you) download this one if you have the verizon http://download.mokeedev.com/c5otvw. For the recovery you need the TWRP 2.8.4.0. and not the last one 2.8.6.0. Make a full wipe before installing. That's all
New update http://download.mokeedev.com/jx1ftj for international HTC one max T6 android 5.0.
htcforo said:
I have installed the international release ( not nightly as you) download this one if you have the verizon http://download.mokeedev.com/c5otvw. For the recovery you need the TWRP 2.8.4.0. and not the last one 2.8.6.0. Make a full wipe before installing. That's all
Click to expand...
Click to collapse
Tried it with that version of twrp to no avail as well. I'll give this release a try.. thanks
The release you posted also does not work. I've tried it on TWRP 2.8.4.0 and the latest release of twrp.
Sorry, but on my HTC one max t6 int. whith twrp 2.8.4.0 and the last release i don't have problems. Sorry but i can't test the verizon here from italy
anyone can tell if the fingerprint is working ?
New update Android 5.0.2
New update for T6 international to download http://download.mokeedev.com/1w23b5
@Flyhalf205 I don't know if you still have a Max to try build on, but if so did you successfully run this build?
andrewjt19 said:
@Flyhalf205 I don't know if you still have a Max to try build on, but if so did you successfully run this build?
Click to expand...
Click to collapse
I can give it a try tonight. I don't have my max with me today.
New screenshots Android 5.0.2 Mokee
Some screenshots of my One Max
Personal opinion
I have tried both OP Cyanogenmod and Mokee. The first one have had too much bugs and not for daily use. The Mokee instead can be used for every day.