Hey, I'm using Alcatel ONE TOUCH HERO 8020X
The phone had stuck in bootloop 'cause there is little accident during the update...
Can someone guide me step by step on how to recover my phone back.. pleassee
I'd found a website that have my phone stock rom
(really hard to find the stock rom though ) I cant post outside link yet but the profile format is tar.xz
aaand i dont have the CWM or any other tools yet to flash this ROM...
please.. i heard recovering the bootloop is easier than rooting the phone...
but i just dont know what to do...
pleassee help me..
m8
Well the tar.xz is actually a sorce code...
I dont know if it's the same?
Related
I edited the sdk version from 19 to 16 in the build_prop after that I rebooted then its stuck on the boot screen. I think its not a soft brick anymore I tried to hard reset my phone but still it doesn't work. Please need help I don't have any custom recoveries like cwm and twrp. Any advice of restoring my phone alcatel ot pop d5 5038a? I'd appreciate that PLEASE HELP :'(
zenyura said:
I edited the sdk version from 19 to 16 in the build_prop after that I rebooted then its stuck on the boot screen. I think its not a soft brick anymore I tried to hard reset my phone but still it doesn't work. Please need help I don't have any custom recoveries like cwm and twrp. Any advice of restoring my phone alcatel ot pop d5 5038a? I'd appreciate that PLEASE HELP :'(
Click to expand...
Click to collapse
According to a forum member on this thread http://forum.datadevelopement.com/a...4-4-2-root-t2873796/post62662075#post62662075 - if you just use the SP Flash tool to reload the custpack partition to repair the build.prop, then you should be good to go. You'll need the scatterfile for the phone as well. That thread is for a different version of your phone, but the idea should be the same. Now, where you can find the firmware to grab the custpack part from, I do not know. Might need to check with Alcatel. Only thing I found online was someone who was trying to sell the scatterfile and rom for it, which is kind of a crappy thing to do. If you can find someone else with the same model phone, you should be able to get them to do a backup with the SP Flash tool and use that to restore your phone, but doesn't seem to be a real popular variant, at least not here on XDA.
Ok I am just gonna say it: I screwed up..
So I recently rooted my Lg Stylo and was researching somethings I should do after rooting and eventually made it to a guide (if you can call it that) about using TWRP. It looked to me like a cut and dry restore app just in case down the line I did something stupid eek and needed to restore it.. Well apparently I was wrong and there is much more to it then that guide I mentioned said and I am not sure exactly where I screwed up but I managed to get it installed, backed up and..... Well that's the problem.. It will not boot the actual phone, it will only boot TWRP.. I have no clue what to do, I installed thinking it was as simple as that but now my phone is useless and I can't figure out what to do.. I just need my phone back, if I have to nuke it or something I don't care I just want to be able to use it again.. and as I said I made a backup and I was hoping that maybe I am just missing something simple enough to get it back but I will do whatever is necessary to return it to it's original state..
The TWRP is 2.8.7.0
The Phone is 5.1.1
I realise that I probably posted this in the wrong section but I am newish here and didn't know where else to go.. So if you guys have any advice, ideas, guides, video tutorials, anything please help me out.. Thanks
http://forum.xda-developers.com/android/development/read-trying-to-root-kdz-files-kdz-tmo-t3152531
Sounds like you'll need to install the kdz. You might have installed the wrong version of TWRP from the sounds of it if all you did was install and then perform the backup and did nothing else and it won't boot.
Hey, I was able to get root on my Y538. But when I tried to delete some bloatware and restart the phone I got stuck in a bootloop. I'm thinking I may be able to fix this issue by sideloading the Y538 kernel from the EMUI site. But I'm having trouble downloading the file.
Has anyone else in the history of the world had this issue before??? I could really use some help here cuz this is kinda my cellular device...
Tried posting the link to the Kernel I need. But I'm unable to. Just search Huawei EMUI Y538 Kernel. It should come up.
Lemme know if you have any questions or solutions. Thanks much!
I have the kernal if you still need. I can't get it to sideload because no adb recognition, though. :/
My union softbrick...also from root and reboot...is looking more and more like a hard brick lol. Any help would be appreciated.
8wrlobo said:
I have the kernal if you still need. I can't get it to sideload because no adb recognition, though. :/
My union softbrick...also from root and reboot...is looking more and more like a hard brick lol. Any help would be appreciated.
Click to expand...
Click to collapse
I don't need it anymore.. I trashed the phone and bought a new one. But thx bro. Can u post a link to it on here? I'm sure I'm not the only one who has had this prob...
https://mega.nz/#!etZGnLCJ!7sZFaareNdhKeIuGHyAZuCYTYfzd_LwmWFqnKjPGpR8
Good luck. Let me know if anyone can successfully flash jt.
Y538-A1 Huawei Union.
http://emui.huawei.com/en/plugin.php?id=hwdownload&mod=detail&mid=108
Any update on this?
Today I tried to replace kingroot with supersu. Now the phone gets stuck on boot screen.
I can't find the guide how to use the source code to fix this.
Android update soft bricked my sons phone.
i can get it to boot into recovery and the sd card update, how ever, the update will not work. is it totally done for?
I used kingroot and accidentally deleted a wrong file. Then I restored and now I can't get that file back.. my messaging app and browser just crash on their own. I tried doing a master reset but it didn't do anything. Maybe you guys can help if you have the stock rom or a cyanogen mod or any custom rom to at least get a working phone? Thanks a lot. I'm a newbie..
on mobile 3622a
You're only hope is someone else with this phone seeing this and is also rooted that could copy the files you need. You won't find any custom roms for the phone nor the stock rom. Coolpad nor developers couldn't care less about providing anything for this phone. You should post what you deleted in case someone comes across it that has the phone so they would know what you need.
Assistance
What did you successfully root with? I'll root mine and give you files.
We_Recless said:
What did you successfully root with? I'll root mine and give you files.
Click to expand...
Click to collapse
Hey I did the same I used Kingo root and it installed Supersu. I followed the directions on supersu to root it and it started the process then it rebooted my device and now it is stuck on the carrier start up screen and won't factory reset in recovery mode it stays stuck in the boot loop of you can post or if there's a ways for the Stock Rom for the Coolpad Cataylst 3622a if appreciate it I've looked for a week and can't find anything at all to download the OS Rom or anything
Do you know what flash tool I can use to unbrick my Coolpad catalyst
I rooted my Coolpad catalyst with KingRoot and I root. When KingRoot rebooted my phone i tried iroot and then it installed kingroot.It was rooted with no problem.I tried flashing it and something went wrong.Please help i need firmware and flashtool :crying::crying::crying::crying::crying:
coolpad catalyst 3622a.. need rom/firmware
i need this rom/ firmware for this phone as well ..i got the tool to connect to the phone still none ot the firmwares cbp file i downloaded worked...
I have this phone too, and i'd love to figure out how to safely root it. I just want to delete some bloatware,,, not mess with anything important. It onyl has 8g (5g free) so I'd like as much space as possible.
If anyone has advice, please let me know.
JoshuaR17 said:
Hey I did the same I used Kingo root and it installed Supersu. I followed the directions on supersu to root it and it started the process then it rebooted my device and now it is stuck on the carrier start up screen and won't factory reset in recovery mode it stays stuck in the boot loop of you can post or if there's a ways for the Stock Rom for the Coolpad Cataylst 3622a if appreciate it I've looked for a week and can't find anything at all to download the OS Rom or anything
Click to expand...
Click to collapse
Tell me the exact steps as you bricked the phone ? I rooted with Kingoroot but would pass it to SuperSU and since reestablished the phone makes the app was removed kingo superuser, you think you have a problem installing SuperSU?
Sorry for my bad english :silly:
I too managed to soft brick a catalyst with kingroot. Phone now hangs\doesnt get past the startup animation. Whats weird is a USB interface is enabled with the hardware id USB\VID_1EBF&PID_707D&REV_0310, however nothing that Ive tried on it (driver wise..) seems to work. If I could just get this phone working, I can and will make a unbrick sd card image for it. Just for sh*ts and giggles I tried running a samsung debrick sd card image on a qdload\hard bricked 3622a, and to my delight it attempts to boot but the locked bootloader wont permit it.
Ill take you up on that
We_Recless said:
What did you successfully root with? I'll root mine and give you files.
Click to expand...
Click to collapse
I rooted mine with kingroot.apk worked really well i'll take backup copy plz
Help please
I also can't get past the animation for my coolpad catalyst 3622a if anybody can help me please i would appreciate it!!
anybody had any luck finding the firmware for this phone ?
Ive been looking for a stock firmware\update.zip\system image for this phone since late Feb. with no luck whatsoever. I think we'll be waiting a while...
My phone won't even let me install it. I get a pop-up halfway through it's installation process. Something like, "there's code in this app that attempts to bypass developer sw...." and the app fails to be installed. Any suggestions??
unbrick 3622a
I have all the required files to reflash/ unbrick this device. How can I post it here?
please help
lehmancurtis said:
I have all the required files to reflash/ unbrick this device. How can I post it here?
Click to expand...
Click to collapse
can you please send me the reflash for the coolpad catalyst 3622a its bricked..send it to my email [email protected]
Files
If you still happen to have these files it would be a major help if You'd be willing to send them my way. I would forever be in your debt.
Brandon: [email protected]
lehmancurtis said:
I have all the required files to reflash/ unbrick this device. How can I post it here?
Click to expand...
Click to collapse
Can anyone explain how to achieve COM with YGDP From QDloader9008? Thanks in advance.
Richardsingh81 said:
can you please send me the reflash for the coolpad catalyst 3622a its bricked..send it to my email [email protected]
Click to expand...
Click to collapse
Could you also send that to me? [email protected]
This is what I used (prior to getting stuck in qdloader9008 for an unrelated blunder) to bring mine back from soft brick TMobile ROM. It has received mixed reactions.
https://drive.google.com/file/d/0B12HF0SwHwosWVRiUmdHS2NLRnM/view?usp=sharing_eil&ts=598b34d6
Hopefully this link functions and is helpful for some.
PS any help to get past qdloader9008 would be greatly appreciated.
Mt6761 chi p set****
I am in need of some assistance. I just got this phone and i had unlocked the boot loader and was trying to install twrp but have done something wrong. Now i am stuck with bootloop. I contacted wiko for the stock recovo[ery but they said they will not be releasing it for this model. If someone could be so kind as assist me in either pulling nessisary files from a new stock wiko ride or pulling the needed files from a device they own and be so kind as share. The bootloader wasnt hard to unlock at all.. I just couldnt find a twrp or any other files on google for this device and must have made a mistake when trying to create my own twrp. Any help would be so grately appreciated
Reply
WesHTCB said:
Mt6761 chi p set****
I am in need of some assistance. I just got this phone and i had unlocked the boot loader and was trying to install twrp but have done something wrong. Now i am stuck with bootloop. I contacted wiko for the stock recovo[ery but they said they will not be releasing it for this model. If someone could be so kind as assist me in either pulling nessisary files from a new stock wiko ride or pulling the needed files from a device they own and be so kind as share. The bootloader wasnt hard to unlock at all.. I just couldnt find a twrp or any other files on google for this device and must have made a mistake when trying to create my own twrp. Any help would be so grately appreciated
Click to expand...
Click to collapse
Did you get the needed files yet?
Not exactly.. I had tried to make a backup of a new ride device but couldnt get them to work properly without breaking varity...i used mtk-su to do the backup. If you have any advise, files, or even questions i could use or help you with... Let me know...
What files u need? I found a way to read and copy files from boot and system partitions
Idk if anyone is using this thread anymore but I have a full backup of the wiko ride stock image I believe. If needed let me know.
KaosKreationz said:
Idk if anyone is using this thread anymore but I have a full backup of the wiko ride stock image I believe. If needed let me know.
Click to expand...
Click to collapse
i have a wiko ride that i recently soft bricked just messing around and i can not find the right files to flash to it anywhere. yes, please, i could use the backup if you are still in possession of it.