Hi I hope someone can help. - Xperia Z2 Q&A, Help & Troubleshooting

I have the z2 and just bought the sony mex n4000bt car stereo. I have been told by sony that I'm unable to listen to my usb stick containing music and have my navigation app cut in to give me directions. I can only listen to one or the other. So does anyone please no a way around this. I am not rooted.

Mount the usb stick to the phone with usb otg and listen to music via bluetooth. Navigation will cut in then.

Great thanks will give it a try.

[email protected] said:
I have the z2 and just bought the sony mex n4000bt car stereo. I have been told by sony that I'm unable to listen to my usb stick containing music and have my navigation app cut in to give me directions. I can only listen to one or the other. So does anyone please no a way around this. I am not rooted.
Click to expand...
Click to collapse
I have the 5000 , just use the phone for your music, media and navigation. It will auto mute the music when navigation instructions are required.

Ok thanks. Sony told me it was one or the other. I'm obviously doing.something.wrong

For some reason neither is working for me. Is there any other app I need to install or anything specific set in my settings or sony smart connect app. Sorry but thanks

I have a similar Alpine system and the issue is you can only listen to one source. So if you play USB media the bluetooth will only cut in for calls. If you load your music on phone and play it from phone via bluetooth streaming then notifications and navigation will cut in as it's being done on the phone.

Related

[Q] Car Dock Mode: Output voice calls through speaker

I use the Samsung official SGS2 Car dock with an audio cable to my car DVD sytem. When navigating with Google Maps and playing music the phone routes the audio to my car speakers. That's working good.
When I have an incoming call my ringtone comes over the speaker, but when I accept the call the voice is being routed over my phone-speakers.
Is there a custom ROM / mod / app who can fix this?
Bonus question: Why can't the SGS2 use the top 3.5 mm as a video output for my DVD player? Even the Nokia n95/n97 could do this. Anyone?
Thanks
Someone ? Thnx
Dont think anyone knows the answer right ?
Try to go into Bluetooth settings, there you can find all your authorized devices. Long tap on your car device will bring you into services list. Check or uncheck required services. Probably it will help you.
Hello,
i have the same problem.... some a answer for this?
only Calls over the internal speaker.. other sounds over the car-system.
hope some rom could fix this.
facing same prob.
i read somethink and some developers told that, the kernal must root the audio to the docking station.... its a app in the market for this, but its dosn`t work....
i think its the same problem like the galaxy 1...

How to get alarms/notifications in speaker if headphones plugged in.

Hello Fellas!
Recently i started to listen to music/audiobooks before i go to sleep,
the problem is that in android 4.2/4.1 even with clock apps that tries to force audio through speaker (at least on my phone) only plays the audio through the headphones which has fallen of during night.
So i though i should make an post instructing how i got the alarm to play through the speaker even with the headphones connected.
the answer is Soundabout combined with Tasker (you could probably use other automation tools as well)
1. download soundabout free from market.
2. set Media Audio to speaker.
3. force close soundabout.
4. Download Tasker (which is a paid app but is well worth the money) (or other automation tool)
4a. go to settings and untick beginner mode.
5. Download and place "userbackup.xml" in the "tasker" folder in the root of your sdcard
userbackup.xmll
6. Open tasker, press the menu button --> data --> restore.
This hack will open soundabout at 6am if the headphones are plugged in, if you are rooted it will also force kill soundabout when you unplug.
NOTE: if you have any profiles allready you should make a backup and add my profile at the bottom of your "userbackup.xml."
Hope this helps!
Best Regards
Thanks
No problem, the only problem is that you have to force close the app every single day though,
i emailed the developer of soundabout about this and he said he would try to make a tasker plugin to make this easier!
Hey guys.
Any update on this?
Thanks
Alan
I dont get it... Soundabout runs a service, so it should be able to force audio through speakers without the need to fc it and start it via Tasker
But the fact is that it does not work on my phone. I have a headset plugged at all times and I just miss all calls
It is said that music apps can prevent soundabout from routing audio through speakers.. i am still testing, will post if I come to a conclusion on what music app does not bring this issue
I ****ing hate those ****tards at google who thought they should change that... since the beginning of time, call and sms alerts always went to speaker regardless the headset is plugged
maeman said:
I dont get it... Soundabout runs a service, so it should be able to force audio through speakers without the need to fc it and start it via Tasker
But the fact is that it does not work on my phone. I have a headset plugged at all times and I just miss all calls
It is said that music apps can prevent soundabout from routing audio through speakers.. i am still testing, will post if I come to a conclusion on what music app does not bring this issue
I ****ing hate those ****tards at google who thought they should change that... since the beginning of time, call and sms alerts always went to speaker regardless the headset is plugged
Click to expand...
Click to collapse
I guess you dont have to fc, but i atleast had to force everything to the speaker. So the easiest way to get the sound back to my earplugs was to force close it.
The updated version does it automaticly so im good for now
Will pay $ for tasker script.
Hi to all of You.
I would like to have profile that force incoming call ringing and notifications to speaker when wired headphones with mic is plugged but not media sounds like YouTube or games, media sounds should be played only by wired headphones with mic.
I am willing to pay some reasonable amount of $ for person, who will write such tasker script for me.
([email protected])
Audio through external speaker with headphones plugged in - Tasker
Any better solution found for this yet? I would like to get tasker to still play audio through the external speaker when the headphone jack is plugged in. I would prefer not to use another app for this, just a tasker profile.
I just received a pressy like headphone button but it mutes the external audio since the phone thinks headphones are plugged in. The apps available for the Klick buttom don't seem too trust worthy or functional. I still want to use it to keep the dust out of the jack but not miss all the audio calls and notifications. A simple tasker profile to accomplish this would be great.
Any ideas?
pzayx said:
I guess you dont have to fc, but i atleast had to force everything to the speaker. So the easiest way to get the sound back to my earplugs was to force close it.
The updated version does it automaticly so im good for now
Click to expand...
Click to collapse
also with Xprivacy you can change and give permission to prevent soundabout from changing speaker after, or there are many other permissions it's asking for.
Couldn't dig deeper, but may give an idea to someone.
I had a similar issue, except in my case I use a wired handset with my phone and I wanted notifactions to sound through the phone speaker rather than through the handset. My solution was to use the Automate app with the configuration attached. Plugging the handset mutes the notification, then on SMS received it plays a sound, with the output stream set as "ring" so it sounds through the phone speaker.
As far as I'm aware, it's not possible to play audio through two streams simultaneously- don't cross the streams...
I'm using a Sony Z3 with LineageOS, but I guess this should work with any android compatible with the current version of Automate.

Smartconnect opens the Walkman app, instead of Google Music play?

Hello Members
I've a bluetooth Alpine car stereo, and when I connect my XZU the default music player is the Walkman app, if I pause the app and close it then try and use Google Music Player app, I get no sound through the car stereo.
I've worked out that apparently the Sony Walkman app takes possession of the Bluetooth sound connection as default, and that this is showing up in the Smartconnect app under the 'device' section under 'application'.
So, how can I change the default application that opens in the Smartconnect app to Google Music play, when I connect to my car stereo?
Any help would be great, thanks
Regards
Livio
liviococcia said:
Hello Members
I've a bluetooth Alpine car stereo, and when I connect my XZU the default music player is the Walkman app, if I pause the app and close it then try and use Google Music Player app, I get no sound through the car stereo.
I've worked out that apparently the Sony Walkman app takes possession of the Bluetooth sound connection as default, and that this is showing up in the Smartconnect app under the 'device' section under 'application'.
So, how can I change the default application that opens in the Smartconnect app to Google Music play, when I connect to my car stereo?
Any help would be great, thanks
Regards
Livio
Click to expand...
Click to collapse
SmartConnect/events then edit the one linked with your car stereo. Haven't tried it myself so don't know it you can change the default, but I have it so it plays PowerAmp on car connection, so should work.
Sent from my C6833 using XDA Premium 4 mobile app
Thanks SpyderTracks, if I add an 'Event' to the 'Alpine car stereo' device to allow Google Music Player to start, then what I get is, on connecting to the car stereo the Walkman app will open in the notification bar, but I'll have to close it first and then open the Google Music Player app.
Smartconnect should really just allow me simply to change the default startup 'Applications' rather than having to add additional events.
Has anyone got any ideas if the primary Application for a device in Smartconnect can be altered?
I really can't understand how, or why it's having to work in this way, and why Smartconnect didn't ask me first what Application I wanted to start, when I first made the Bluetooth pairing to the Alpine Car stereo.
This option should have been a choice that I make.
liviococcia said:
Thanks SpyderTracks, if I add an 'Event' to the 'Alpine car stereo' device to allow Google Music Player to start, then what I get is, on connecting to the car stereo the Walkman app will open in the notification bar, but I'll have to close it first and then open the Google Music Player app.
Smartconnect should really just allow me simply to change the default startup 'Applications' rather than having to add additional events.
Has anyone got any ideas if the primary Application for a device in Smartconnect can be altered?
I really can't understand how, or why it's having to work in this way, and why Smartconnect didn't ask me first what Application I wanted to start, when I first made the Bluetooth pairing to the Alpine Car stereo.
This option should have been a choice that I make.
Click to expand...
Click to collapse
Just worth a try, try adding a new action when you're next in the car and deleting the existing one.
Sent from my C6833 using XDA Premium 4 mobile app
i can't get this working. i've paired my bluetooth earphones and all headset controls (even if in google music) work through that damn walkman app.
i looked in events and see nothing about stopping that app taking default control of inputs.
i tried to freeze the app and it did nothing.
i listen to audio courses on my phone on the way in to work and need to be able to press pause. this phone can't do that unless the screen is on in front of me the whole time which is going to kill my battery
---------- Post added 14th October 2013 at 12:00 AM ---------- Previous post was 13th October 2013 at 11:25 PM ----------
ok, froze smart connect and walkman and seems to be better, except oddly the pause button doesn't work as it did before
and what i've done above stops the smartwatch connecting.
any way to have both?
SpyderTracks thanks for the suggestion, and I did think of trying that.
But when I initially connected the car stereo up to the phone the first time, it never gave me the option to setup a new Smartconnect hardware action for the stereo's connection, it made that wrong decision for me.
So, because we need to find out if either the Smartconnect software can either be controlled fully, or if it can be deactivated without effecting the SmartWatch 2 functions, I've email Sony for help also. I think that all bluetooth connect 'Application' decisions in Smartconnect software should be confirmed, and all Sony bluetooth hardware specific items should be automatic.
Or, that the Smartconnect software should only be relevant to Sony NFC Bluetooth, and WIFi products, and nothing else.
Hope your listening Sony!
liviococcia said:
SpyderTracks thanks for the suggestion, and I did think of trying that.
But when I initially connected the car stereo up to the phone the first time, it never gave me the option to setup a new Smartconnect hardware action for the stereo's connection, it made that wrong decision for me.
So, because we need to find out if either the Smartconnect software can either be controlled fully, or if it can be deactivated without effecting the SmartWatch 2 functions, I've email Sony for help also. I think that all bluetooth connect 'Application' decisions in Smartconnect software should be confirmed, and all Sony bluetooth hardware specific items should be automatic.
Or, that the Smartconnect software should only be relevant to Sony NFC Bluetooth, and WIFi products, and nothing else.
Hope your listening Sony!
Click to expand...
Click to collapse
Thanks for the info and your time on this... I hope Sony respond. It seems short sighted to lock such a good app to link to Sony apps only... Keep us posted please :sly:
Sent from my C6833 using XDA Premium 4 mobile app
Just an update,...
Sony never responded to my email, I ended up doing a Web chat, which got me nowhere so I ended calling them with no success.
I have read a few forum posts regarding this type of problem from a while back, people were experiencing problems of the Alpine head unit showing BT A Pause' when using some apps, while other apps on there phones (of the time) worked with no problems.
I think this problem not so much a Sony problem, as it is, how Google Music Player is interacting within the Bluetooth connection of the phone, and the way the Alpine Bluetooth car head unit is understanding the connection.
There was a known issue with Alpine BT head units, and ipods/Iphones/and Motorola s, which lead them to issue a firmware update, I wounder wheather this might be the case again for the XZU
I have just discovered this issue today when trying the google music app. This is frustrating as Play Music allows saving to SD by default, and I am not willing to root my Z Ultra.
It does appear that smart connect is locked to the Walkman app which makes switching music service almost impossible. :crying:
McNexus said:
I have just discovered this issue today when trying the google music app. This is frustrating as Play Music allows saving to SD by default, and I am not willing to root my Z Ultra.
It does appear that smart connect is locked to the Walkman app which makes switching music service almost impossible. :crying:
Click to expand...
Click to collapse
I use poweramp which you can set to autostart when there's a BT connection. Bypasses smart connect entirely with the same outcome.
Sent from my C6833 using XDA Premium 4 mobile app
grrr sony
liviococcia said:
Hello Members
I've a bluetooth Alpine car stereo, and when I connect my XZU the default music player is the Walkman app, if I pause the app and close it then try and use Google Music Player app, I get no sound through the car stereo.
I've worked out that apparently the Sony Walkman app takes possession of the Bluetooth sound connection as default, and that this is showing up in the Smartconnect app under the 'device' section under 'application'.
So, how can I change the default application that opens in the Smartconnect app to Google Music play, when I connect to my car stereo?
Any help would be great, thanks
Regards
Livio
Click to expand...
Click to collapse
This is quite a frustrating problem. Sony is quite elitist when it comes to their software. Fortunately andoid is flexible. Delete all events for smart connect. And install tasker. With tasker you can set Google play to start when headphones or bluetooth are connected.
Its not quite as good as smart connect unfortunately, because it has a very confusing interface. But once you figure out how to work with tasker its definately a "set and forget" type of functionality.
Hope this helps ^-^

Play Songs Via Bluetooth (Phone!)

Hello guys,
i hope im posting this in the right section.. so here is what im looking for:
my car's radio supports only bluetooth phone function so i cant play music via bluetooth.. but i got this idea last time when even the phone function of whatsapp worked with the bluetooth of my car:
is there an app to play music via the bluetooth-phone instead of bluetooth-headset function? and if not can somebody give me a hint or usefull tutorials (playing music app, using bluetooth and so on) on how to develop such an app?
would be really great if u guys can help me with this it really pisses me off that i cant use bluetooth to play my music! and im sure this would help many others too!
thanks!
First thing this is the wrong section.......
Second.....you don't need an app to do it man.....just connect to your car stereo....then go to Bluetooth settings.....click on the name of your stereo device....open device settings.....there will be an option for use as speaker or something like that....I don't remember the exact words....but I've done it before.....
Third.....always search for tutorials before posting direct questions......
Fouth press thanks buttons if i helped.....
sorry for my late answer..
this didnt help at all.. i dont know if u ever had a radio which is able to only use bluetooth for phone calls. if it would be possible i would have found it in the radio settings for sure but this is the 2nd radio i had to deal with which isnt possible to play music via bluetooth even though it has bluetooth! i would be able to find bluetooth option under sourcers of music playing devices right next to the usb and CD option but there is no bluetooth option.. im not that dumb bro
arianii said:
sorry for my late answer..
this didnt help at all.. i dont know if u ever had a radio which is able to only use bluetooth for phone calls. if it would be possible i would have found it in the radio settings for sure but this is the 2nd radio i had to deal with which isnt possible to play music via bluetooth even though it has bluetooth! i would be able to find bluetooth option under sourcers of music playing devices right next to the usb and CD option but there is no bluetooth option.. im not that dumb bro
Click to expand...
Click to collapse
I guess you got him wrong. You have to look at the Bluetooth settings on your phone and search for your car's radio as output source. If you have paired your device with your radio, you should be able to stream your music to your radio via Bluetooth if supported.
In case your car isn't able to support music playback, then there is no possibility for you to listen to your music besides buying a radio which is able to do so.
orville87 said:
I guess you got him wrong. You have to look at the Bluetooth settings on your phone and search for your car's radio as output source. If you have paired your device with your radio, you should be able to stream your music to your radio via Bluetooth if supported.
In case your car isn't able to support music playback, then there is no possibility for you to listen to your music besides buying a radio which is able to do so.
Click to expand...
Click to collapse
at least you understood me right
but is there really no way using phone function to play music? i mean whatsapp is just an app it should be possible developing an selfmade app to create phone bluetooth connection and then play your own music through it. or isnt the bluetooth-phone "tunnel" able to use for other things except calls?
Your issue is that your car radio desert support A2DP protocol. This is what is used to send and receive music to devices.
What you won't to do will not work unless you build an app that sends it's audio through the protocols for the phone. Here you will run into call issues.

[Q] Bluetooth Audio-Play on Connect

Whats up everyone... I've had this phone for a few months now and can say it's easily the best I've ever had.
The only "issue" to speak of that I've found is when my phone connects to my car bluetooth, it doesn't always automatically play. I've tried clearing/resetting pairing, all sorts of different music players (power amp, google play, android basic, etc), even tried to utilize the Smart Connect native app in the phone to start the music player app when connected. I have all available options checked related to automatically playing music on bluetooth connect.
Bottom line, the problem is intermittent, frustrating, and I can't seem to figure it out. Is anyone else out there have a similar issue or have any tips related to this?
hunter82i said:
Whats up everyone... I've had this phone for a few months now and can say it's easily the best I've ever had.
The only "issue" to speak of that I've found is when my phone connects to my car bluetooth, it doesn't always automatically play. I've tried clearing/resetting pairing, all sorts of different music players (power amp, google play, android basic, etc), even tried to utilize the Smart Connect native app in the phone to start the music player app when connected. I have all available options checked related to automatically playing music on bluetooth connect.
Bottom line, the problem is intermittent, frustrating, and I can't seem to figure it out. Is anyone else out there have a similar issue or have any tips related to this?
Click to expand...
Click to collapse
What stereo system do you have in your car? I have the Pioneer AVH-X4500BT in my car and each time I start my car up, it searches to auto connect to my phone. Once it does and I have it on Bluetooth Audio mode, it plays whatever song I just had played on my phone.
GigaSPX said:
What stereo system do you have in your car? I have the Pioneer AVH-X4500BT in my car and each time I start my car up, it searches to auto connect to my phone. Once it does and I have it on Bluetooth Audio mode, it plays whatever song I just had played on my phone.
Click to expand...
Click to collapse
Also have a Pioneer head unit BT6400 I believe. Have used it with my past 3 phones... motorola and HTC without issue. The behavior you've described is the way all have worked in the past. Now, for whatever reason, sometimes it does not auto play.
hunter82i said:
Also have a Pioneer head unit BT6400 I believe. Have used it with my past 3 phones... motorola and HTC without issue. The behavior you've described is the way all have worked in the past. Now, for whatever reason, sometimes it does not auto play.
Click to expand...
Click to collapse
Were there any changes you've applied to your phone? Safe bet is to clear out the BT connection in memory and connect as if new. Also try to limit to just one music player on the phone. Because I think it would automatically run off of Walkman, but other players can interfere.

Categories

Resources