hi . i have MOTOROLA ATRIX 4G with cm11 and cwm installed
recently i did a factory reset and when i reopened my phone it says "unfortunately setup wizard ha stoped"
and when i got back to cwm recovery to flash another rom
my power button didnt worked to select but volume button did worked
now i can not also flash recovery via fastboot becoz my android debugging is not enabled nd i also cant open phone
now what should i do...???
plz help
AbHI001 said:
hi . i have MOTOROLA ATRIX 4G with cm11 and cwm installed
recently i did a factory reset and when i reopened my phone it says "unfortunately setup wizard ha stoped"
and when i got back to cwm recovery to flash another rom
my power button didnt worked to select but volume button did worked
now i can not also flash recovery via fastboot becoz my android debugging is not enabled nd i also cant open phone
now what should i do...???
plz help
Click to expand...
Click to collapse
You can bypass the setup wizard by tapping in clockwise direction the four corners of the screen. You don't need android debugging to flash through fastboot, just power on the phone while pressing vol - until the fastboot text appears and then press vol + to start fastboot. About the problem with the power button in recovery, if it's broken, I can upload a PhilZ recovery with touch enabled that I compiled.
AbHI001 said:
hi . i have MOTOROLA ATRIX 4G with cm11 and cwm installed
recently i did a factory reset and when i reopened my phone it says "unfortunately setup wizard ha stoped"
and when i got back to cwm recovery to flash another rom
my power button didnt worked to select but volume button did worked
now i can not also flash recovery via fastboot becoz my android debugging is not enabled nd i also cant open phone
now what should i do...???
plz help
Click to expand...
Click to collapse
Replace your device.
thanx 4 d help man
Reiki21 said:
You can bypass the setup wizard by tapping in clockwise direction the four corners of the screen. You don't need android debugging to flash through fastboot, just power on the phone while pressing vol - until the fastboot text appears and then press vol + to start fastboot. About the problem with the power button in recovery, if it's broken, I can upload a PhilZ recovery with touch enabled that I compiled.
Click to expand...
Click to collapse
thanx 4 d help
i bypassed the setup
Related
I flashed the clockworkmod for the first time. After that went back to menu by holding power + vol - but I can only see the usb icon and downloading icon. No recovery option. if I go into usb mode it just stucks there and on top bootloader: uknown. Anyone know what's up? I'm using the google IO tablet btw.
will89 said:
I flashed the clockworkmod for the first time. After that went back to menu by holding power + vol - but I can only see the usb icon and downloading icon. No recovery option. if I go into usb mode it just stucks there and on top bootloader: uknown. Anyone know what's up? I'm using the google IO tablet btw.
Click to expand...
Click to collapse
Have you flashed the recovery or just booted it.....anyways
If you have got a rom with extended power menu you can reboot in recovery that way...
If not, get your recover.img and put it in a folder on pc.
go into fastboot mode (vol. down. / Power then select USB) and type :
Fastboot boot recovery <path>recovery.img
you could also try ROM manager...
No USB-boot
I got the exact opposite/same issue on my 10.1v,
I can only see the recovery and Downloading... icons and not fastboot.
See attachment for a screenpicture of what I get when pressing VolDown + Power.
Recovery, adb, and rooted ROM all work great - but fastboot aint an option...
Can't test isimobile's ICS-rom without fastboot
edit:
attachment buggered up.
richard2311 said:
Have you flashed the recovery or just booted it.....anyways
If you have got a rom with extended power menu you can reboot in recovery that way...
If not, get your recover.img and put it in a folder on pc.
go into fastboot mode (vol. down. / Power then select USB) and type :
Fastboot boot recovery <path>recovery.img
you could also try ROM manager...
Click to expand...
Click to collapse
Thanks for the tips on using ROM manager. That solved my problem, finally able to try the CM9 Kangs rom
I have a stock Jelly Bean 4.1.2 installed on my xperia P handset. I wanted to install the custom rom CM 11 on my xperia. So I first rooted my handset using Doomlord Easy rooting toolkit. Then I copy pasted the custom Roms zip file in the internal storage. Then in order to install the custom rom I need to boot into the recovery mode of xperia P.
So I first tried using Quick Boot but it goes on rebooting to the regular jelly bean OS and doesn't enter the recovery mode.
Could anyone guide me which step I actually missed for installing the custom rom. If a perfect guide is provided I would be very grateful.
press power button + vol up button for 5 seconds... it will vibrate 1 time.. it will reboot.now keep pressing vol down key or power button ((because in some kernel key is different.)) key until it displays a menu in blue fonts.it's clockworkmod recovery.:good:
dev neo said:
press power button + vol up button for 5 seconds... it will vibrate 1 time.. it will reboot.now keep pressing vol down key or power button ((because in some kernel key is different.)) key until it displays a menu in blue fonts.it's clockworkmod recovery.:good:
Click to expand...
Click to collapse
I tried doing the steps as guided by you. On pressing the volume up key and the power button it vibrates 1 time then I kept on pressing the power button. So then the phone booted in safe mode again and again and then when I stopped pressing the power button the phone booted normally again in Jelly Bean. Is there any problem with unlocking the bootloader. I have received a key for unlocking the bootloader on my GMail account when I requested it on the sony's website.
did u tried with volume down key to enter recovery..? u said that u wanna install cyanogenmod ..so u need a custom kernel which can be found in same zip file of rom named 'boot.img'.& & a custom kernel needs unlocked bootloader. if u have to unlock your bootloader ..u have to search ..it's very easy and can be found on this forum,too(( if not pm me i'll send detailed steps.)).& yes,u are gonna need that key which you received to unlock bootloader .
u can always use ( fast boot ) to flash cm11
it`s better and best ......
any ways u could inter recovery mood by pressing volm+ 2 time`s after the phone vibration ....when sony log show...
its always work
If you installed CMW, to enter it I push about 10 or 15 times, while the phone is turning on, until it loads the cmw
Neesk said:
If you installed CMW, to enter it I push about 10 or 15 times, after first turning on vibration until it loads the cmw
Click to expand...
Click to collapse
If u wanna help at least write it the right way...
For CWM, turn on phone, when it first shows the Sony logo start pressing various times (Volume - ) key (don't push one time and keep the finger on the key!!) until it enters cwm recovery.
DannyDD said:
If u wanna help at least write it the right way...
For CWM, turn on phone, when it first shows the Sony logo start pressing various times (Volume - ) key (don't push one time and keep the finger on the key!!) until it enters cwm recovery.
Click to expand...
Click to collapse
For me it works only with Volume '+'
In CM11 zip, u have the boot.img... flash it using fastboot (doesn't work on Windows 8 or 8.1), then u'll have the CM11 kernel... turn on the phone and when it is starting, it'll vibrate when showing sony logo, just tap the power button when vibrates and will enter in CWM, then just follow the tutorial in CM11 topic.
so what's the right way to reboot in recovery mode? I've this kernel http://forum.xda-developers.com/xperia-u/p-development/rom-cyanogenmod-11-0-t2626639
wiking76 said:
so what's the right way to reboot in recovery mode? I've this kernel http://forum.xda-developers.com/xperia-u/p-development/rom-cyanogenmod-11-0-t2626639
Click to expand...
Click to collapse
I got same problem to reboot in CWM mode. Following all recommendations in this thread. Did not work.
However when coming back to one of the Xperia Phone instructions to reboot in CWM, I tried again to follow those instructions given by following links :
Sony Xperia P CyanogenMod 11 Project page Thread on xda-developers https://sites.google.com/site/androdevlinux/xperia-p/xperia-p-roms/cm11-download/
Here are extracts which I strictly followed :
First time flashing CyanogenMod 11.0 your device, or coming from another ROM? You need to be on Unlocked bootloader
Fastboot kernel(boot.img) from the rom zip
Press power button when Device vibrates at boot splash/logo to enter TWRP recovery
Format data and cache
Flash the Zip
Reboot​
The "Press power button when Device vibrates at boot splash/logo to enter TWRP recovery" is really the trick to enter CWM mode ....
i installed a custom rom, but due to some reason it hasnt installed properly and not letting me access settings. and moreover i am not able to install CWM recovery as vol - button way is not wrking.
Wht shd I do?? please help
hi every one ,,
i have Haier - HR 738R Tablet ... It doesn't have volume keys, it's only with power key and reset pinhole
so,, i pressed and held Power + reset and i've seen the android man , but i couldn't get the recovery tasks
so what should i do ?!
Hema72 said:
hi every one ,,
i have Haier - HR 738R Tablet ... It doesn't have volume keys, it's only with power key and reset pinhole
so,, i pressed and held Power + reset and i've seen the android man , but i couldn't get the recovery tasks
so what should i do ?!
Click to expand...
Click to collapse
you can use rom manager which directs you to recovery mode without pressing vol buttons
you can use xposed modules which provide three reboot option
Vaibhav Chauhan said:
you can use rom manager which directs you to recovery mode without pressing vol buttons
you can use xposed modules which provide three reboot option
Click to expand...
Click to collapse
How can i do that ?!
Vaibhav Chauhan said:
you can use rom manager which directs you to recovery mode without pressing vol buttons
you can use xposed modules which provide three reboot option
Click to expand...
Click to collapse
ahhh ... but the proplem is that there is pattern lock which i forgot saw i can't do this one
So your phone is pattern locked and you want to get to recovery, do it via adb. Make sure you have adb drivers installed, look here for an easy way to setup adb.
In command prompt, type the following:
Code:
adb devices
adb reboot recovery
Hema72 said:
How can i do that ?!
Click to expand...
Click to collapse
in rom manager there is direct option enter into recovery
if you press yes then it will direct enters into recovery mode without any button press
i can't do all of this .. actualy i can't see my home screen
i know how to get the android screen with sign but i can't get into recovery mod
So, if u can tell me what to do !
Hi, i have a Op3n Dott, and i installed QAudio Manager, when i install a packages from QAudio and rebooted it, it got a boot loop, and i dont know how to fix it :S
Who can help me ?
Recovery mode and download mode not load.
and i dont have backup of my android
Try this
I had the same problem after rooting.
Unkyy said:
Hi, i have a Op3n Dott, and i installed QAudio Manager, when i install a packages from QAudio and rebooted it, it got a boot loop, and i dont know how to fix it :S
Who can help me ?
Recovery mode and download mode not load.
and i dont have backup of my android
Click to expand...
Click to collapse
Press in continous the level up button and star with the power button. You'll have the bootloader menu where you can reset the phone.
If you press the level down button with the power button, you'll have the factory menu to make differents tests.
Dromadore said:
Press in continous the level up button and star with the power button. You'll have the bootloader menu where you can reset the phone.
If you press the level down button with the power button, you'll have the factory menu to make differents tests.
Click to expand...
Click to collapse
It's still have bootloop :/
Can you help me? i flashed marshmallow rom and when it boots if i press anything on screen it vibrates and reboots,also cant reboot to fastboot as when i press vol up and usb in it just boots to rom..
any suggestions?
The Funky Pear said:
Can you help me? i flashed marshmallow rom and when it boots if i press anything on screen it vibrates and reboots,also cant reboot to fastboot as when i press vol up and usb in it just boots to rom..
any suggestions?
Click to expand...
Click to collapse
Try factory reset and reflash rom via flashtool
rcstar6696 said:
Try factory reset and reflash rom via flashtool
Click to expand...
Click to collapse
I am in the same situation.
I can't do a factory reset with settings menu because Android resets when I touch any element in the screen.
Is there any way to do a factory reset with no recovery and no android interface?
EDIT: It worked using other USB cable. It seems that the previous cable didn't trigger the flashmode.