inverted touch screen ..please helpppp - Android Q&A, Help & Troubleshooting

my tablets a20 allwinner board `: s780I-v10
my touch has just got inverted .when i touch right side screen it goes left..i flashed the stock rom but still the problem exists..anyone look at the script file( attachments ) at tells me what to do...are touch screen drivers missing or not? confused
already converted from script.bin to script.fex
please help
or take look at this
[ctp_para]
ctp_used = 1
ctp_twi_id = 2
ctp_screen_max_x = 800
ctp_screen_max_y = 480
ctp_firm = 2
ctp_int_port = portH21<6><default><default><default>
ctp_wakeup = portB13<1><default><default><1>
[ctp_cfg_para]
ctp_cfg_used = 0
[ctp_list_para]
ctp_det_used = 1
ft5x_ts = 1
gt82x = 0
gslX680 = 1
gt9xx_ts = 0
gt910 = 0
gt811 = 1
gt818 = 0
ilitek_aimvF = 1
zet6221 = 1

you r missing this lines in your ctp parameters
ctp_revert_x_flag = 0
ctp_revert_y_flag = 0
ctp_exchange_x_y_flag = 0
add them then replace the script.bin, if no changes then replace 1 with 0 in the x and y and check again. that should do it
chek out this document ...
linux-sunxi.org/Fex_Guide#touch_key_configuration

My Tablet
I've had some experience with flashing phones with Odin
However I've got a pretty old tablet that runs like a sack of crap... All I wanted to do was put a half decent ROM onto it as it's currently running jellybean and is Extremely slow, always has been right out of the box, I know the hardware side isn't fantastic but surely I can do something with it to make the best of it, was just something I grabbed off Amazon a few years back but I stuck with my phone it was that rubbish, all I wanted to do was use it for basic apps, so heres the details,
Model no: GT90X
SOC CHIP: DUAL CORE A20
Android Version 4.2.2
Firmware Version v1.3
Kernel version 3.3.0+
Build Fingerprint:
softwinners/Wing_k70-eng 4.2.2 JDQ39 20130621 Test-Keys
Internal Storage: 0.99gb
Data internal storage: 5gb
Screen resolution: 480*800 (WVGA)
Software Density: 120 Dpi
Refresh rate: 59.58hz
RIL VERSION: sw-dataonly-ril-0.5
Bootloader: unknown
Java VM Dalvik 1.6.0
OS Version: Jellybean MR1 (4.2.2)
SDK: 17
CPU Architecture: ARMv7 Rev4 (v7l)
Board:wing
Chipset: sun7i
Graphics Renderer: Mali-400 MAP
OpenGL ES 2.0
SENSORS: mxc622x 2-axis accelerometer
That's all the info it gives in the about tablet button in the settings tree, surely I can upgrade it somehow, with ICS or LOLLIPOP ? as the stock firmware updater has found 0 updates since I purchased it and its either i figure out how to get the best out of it or to throw it in the bin... Any help would be much appreciated, You can email me back with any helpful info at [email protected] .COM and I can send you images of the tablet and more details if you require them, please help me Flash this crap and make it better if I brick it i don't care, thanks for reading ! Please ask the really evidenced devs for info and advice too if you think it would help

Related

Galaxy s3 clone issues (gps,camera resolution,compass,single imei,sdcard size wrong)

hi
i have samsung galaxy s3 clone . it was bought in china .. i dont know who made it ..
it is mtk6575 based device .. with 2 sims .. one micro .. and one min which was hidden .. with dummy sim and plastic cover .. and its 4.7 inches display .. its 800 X 480 resolution.. ram is 512mb .. total rom is 4gb (dont konw how to tell what it realy is . but i think this figure is correct ) internal sd card is 2 GB ..
i have also posted pics of the motherboard in a zip file in full resolution.. also posted the cropped versions ..
the board says
Model:1212 [there is some thing in chinese inbetween ..
SW: 1212 v23-1101
Date: 2012-11-14 ZKD or ZKO
.
here are few details ..
here is the result of android analyzer
http://androidfragmentation.com/database/v/dr/592726/oem/GT-I9300/dm/GT-I9300/carrier/Unknown
Manufacturer name GT-I9300
Device model GT-I9300
Device brand samsung
Hardware name mt6575
Firmware version 4.1.9
Firmware configuration version API returned illegal or no value
Build number IMM76D.I9300ZSALE9
Build fingerprint alps/tdc1212/tdc1212:4.0.4/IMM76D/1352963687:user/test-keys
Kernel version 3.0.13
[email protected] #4 Thu Nov 15 16:20:02 CST 2012
Kernel version raw Linux version 3.0.13 ([email protected]) (gcc version 4.4.3 (GCC) ) #4 PREEMPT Thu Nov 15 16:20:02 CST 2012
Bootloader version unknown
Baseband configuration version API returned illegal or no value
Baseband version MAUI.11AMD.W11.50.SP.V20, 2012/11/09 09:33
Instruction Set armv7l
Manufacturer ARM Limited
Name ARMv7 Processor rev 10 (v7l)
Operational Frequency 1400.0 MHz
BogoMIPS 1993.93
Cores 1
CPU revision 10
CPU variant 2
Features swp half thumb fastmult vfp edsp thumbee neon vfpv3
Hardware SMDK4x12
Revision 65fb8a00
Click to expand...
Click to collapse
here is some more info i gathered ..
regarding teh build number i pressed the volume up home and power key simultaneously for few seconds and then left i was given a blank screen .. then i pressed a voluume up key and got a factory mode screen .. there in the version sub menu .. there are a lot of details ..
prominent are
BB Chip : MT6575
MS Board : GT-I9300
IMEI1: here are two imeis
IMEI2:
modem ver : MAUI.11AMD.W11.50.SP.V20, 2012/11/09 09:38
bAR COEE : SOME LONG number is wrtten
build time : thu nov 15 15:15:52 CST 2012
Uboot Ver 2010.06
kernel Ver. : 3.0.13 (root @android) (gcc version 4.4.3 (gcc) ) #4 PREEMPT thu nov 15 16:20:02 CST 2012
Android Ver :4.1.9
SW Ver : ALPS.ICS.MP.V2.6 [ i dont know if its aips or aLps )
Custom Build Verno. : 1352963687
Click to expand...
Click to collapse
here is the info from AndroidSystemInfo app
OS
Browser UserAgent : Mozilla/5.0 (Linux; U; Android 4.1.9; en-us; GT-I9300 Build/IMM76D) AppleWebKit/534.30 (KHTML, like Gecko) Version/4.0 Mobile Safari/534.30
Android ID : 18057d4a1bba2338
Uptime : 0 days, 10 hours, 4 minutes, 45 seconds
Uptime (without sleeps) : 0 days, 10 hours, 4 minutes, 45 seconds
Configuration
Font Scale : 0.9
Hard Keyboard Hidden : YES
Keyboard : NOKEYS
Keyboard Hidden : NO
Locale : en_US
MCC : 410
MNC : 4
Navigation : DPAD
Navigation hidden : NO
Orientation : PORTRAIT
Screen Height DP : 508
Screen Width DP : 320
Smallest Screen Width DP : 320
Screen Layout :
LONG_YES
SIZE_NORMAL
Touchscreen : FINGER
UI Mode :
NIGHT_NO
TYPE_NORMAL
BuildInfos
Android version : 4.1.9
Release Codename : REL
API LEVEL : 15
CPU ABI : armeabi-v7a
Manufacturer : GT-I9300
Bootloader : unknown
CPU ABI2 : armeabi
Hardware : mt6575
Radio : unknown
Board : GT-I9300
Brand : samsung
Device : GT-I9300
Display : IMM76D.I9300ZSALE9
Fingerprint : alps/tdc1212/tdc1212:4.0.4/IMM76D/1352963687:user/test-keys
Host : android
ID : IMM76D
Model : GT-I9300
Product : GT-I9300
Tags : test-keys
Type : user
User : root
Battery
Not charging...
Level : 76 %
Technology : Li-ion
Temperature : 23.0 ∞C (73.399994∞F)
Voltage : 3764 mV
Memory
Download Cache Max: 504MB/ Free: 496MB
data Max: 503MB/ Free: 71.51MB
External storage: mounted
External storage Max: 2.09GB/ Free: 1.80GB
External storage removable: false
External storage emulated: false
External SDCard Max: 14.71GB/ Free: 14.25GB
Total RAM: 487MB
Free RAM: 129MB
Threshold RAM: 44.74MB
Low Memory Killer Levels
FOREGROUND_APP:__ 19.16MB
VISIBLE_APP:_________ 25.02MB
SECONDARY_SERVER: 30.88MB
HIDDEN_APP:________ 38.88MB
CONTENT_PROVIDER: 44.74MB
EMPTY_APP:__________ 54.32MB
Telephony
Networks
CPU
Processor ARMv7 Processor rev 10 (v7l)
BogoMIPS 1993.93
Features swp half thumb fastmult vfp edsp thumbee neon vfpv3
CPU implementer 0x41
CPU architecture 7
CPU variant 0x2
CPU part 0xc09
CPU revision 10
Hardware SMDK4x12
Revision 65fb8a00
Serial 0000000000000000
Frequency range: 200.0 -> 1400.0MHz
Current Frequency: 1001.0MHz
Frequency Stats (time):
- 166.833 MHz 11.32% (410796)
- 250.25 MHz 0.65% (23715)
- 500.5 MHz 1.15% (41621)
- 1001.0 MHz 86.88% (3152266)
Camera
Antibanding: auto
Color Effect: none
Exposure Compensation: 0
Exposure Compensation Step: 1.0
Flash Mode: off
Focus Mode: continuous-picture
Focal Length: 35.0
Horizontal View Angle: 360.0
Jpeg Quality: 85
Jpeg Thumbnail Quality: 85
Jpeg Thumbnail Size: 120x160
Max Exposure Compensation: 3
Max Zoom: 10
Min Exposure Compensation: -3
Picture Format: JPEG
Picture Size: 1680x2800
Preview Format: NV21
Preview Framerate: 30
Preview Size: 480x640
Supported Antibanding:
- 60hz
- 50hz
- auto
- off
Supported Color Effects:
- none
- mono
- sepia
- negative
- aqua
- blackboard
- whiteboard
Supported Flash Modes:
- auto
- on
- off
- torch
Supported Focus Modes:
- auto
- continuous-picture
- continuous-video
- macro
- infinity
- manual
- fullscan
Supported Jpeg Thumbnail Sizes:
- 0x0
- 120x160
- 240x320
Supported Picture Formats:
- JPEG
Supported Picture Sizes:
- 480x800
- 840x1400
- 1080x1800
- 1320x2200
- 1680x2800
- 2190x3650
Supported Preview Formats:
- NV21
- UNKNOWN
Supported Preview Frame Rates:
- 15
- 24
- 30
Supported Preview Sizes:
- 144x176
- 240x320
- 288x352
- 320x480
- 368x480
- 480x640
- 480x720
- 480x800
- 480x864
- 720x1280
Supported Scene Modes:
- auto
- portrait
- landscape
- night
- night-portrait
- theatre
- beach
- snow
- sunset
- steadyphoto
- fireworks
- sports
- party
- candlelight
Supported White Balance:
- auto
- daylight
- cloudy-daylight
- shade
- twilight
- fluorescent
- warm-fluorescent
- incandescent
White Balance: auto
Vertical View Angle: 360.0
Zoom: 0
Zoom Ratios:
- 100
- 114
- 132
- 151
- 174
- 200
- 229
- 263
- 303
- 348
- 400
Smooth Zoom Supported: false
Zoom Supported: true
Screen
Resolution: 480 x 800
Refresh Rate: 76.12
X factor for DIP: 1.5
Density: 240 dpi
Pixel per inch X: 240.0 dpi Y: 240.0 dpi
OpenGL
OpenGL Version supported : 2.0
OpenGL Version supported : OpenGL ES-CM 1.1
Vendor : Imagination Technologies
Renderer : PowerVR SGX 531
Extensions :
GL_OES_byte_coordinates GL_OES_fixed_point GL_OES_single_precision GL_OES_matrix_get GL_OES_read_format GL_OES_compressed_paletted_texture GL_OES_point_sprite GL_OES_point_size_array GL_OES_matrix_palette GL_OES_draw_texture GL_OES_query_matrix GL_OES_texture_env_crossbar GL_OES_texture_mirrored_repeat GL_OES_texture_cube_map GL_OES_blend_subtract GL_OES_blend_func_separate GL_OES_blend_equation_separate GL_OES_stencil_wrap GL_OES_extended_matrix_palette GL_OES_framebuffer_object GL_OES_rgb8_rgba8 GL_OES_depth24 GL_OES_stencil8 GL_OES_compressed_ETC1_RGB8_texture GL_OES_mapbuffer GL_OES_EGL_image GL_OES_EGL_image_external GL_EXT_multi_draw_arrays GL_OES_required_internalformat GL_IMG_read_format GL_IMG_texture_compression_pvrtc GL_IMG_texture_format_BGRA8888 GL_EXT_texture_format_BGRA8888 GL_OES_egl_sync GL_IMG_vertex_array_object
Sensors
mmc328x Orientation sensor: 0.25 mA by Aichi Steel
mmc328x 3-axis Magnetic Field sensor: 0.25 mA by Aichi Steel
mc3210 3-axis Accelerometer: 0.13 mA by The Android Open Source Project
stk31xx Proximity Sensor: 0.13 mA by Capella
stk31xx Light Sensor: 0.13 mA by Capella
Environment
Root Directory: /system
Data Directory: /data
Download Cache Directory: /cache
External Storage State: mounted
External Storage Directory: /mnt/sdcard
Medias Directories
Alarms: /mnt/sdcard/Alarms
DCIM: /mnt/sdcard/DCIM
Downloads: /mnt/sdcard/Download
Movies: /mnt/sdcard/Movies
Music: /mnt/sdcard/Music
Notifications: /mnt/sdcard/Notifications
Pictures: /mnt/sdcard/Pictures
Podcasts: /mnt/sdcard/Podcasts
Ringtones: /mnt/sdcard/Ringtones
Features
android.hardware.wifi
android.hardware.location.network
com.google.android.feature.GOOGLE_BUILD
android.hardware.location
android.hardware.screen.landscape
android.hardware.screen.portrait
android.hardware.wifi.direct
android.hardware.usb.accessory
android.hardware.touchscreen.multitouch.distinct
android.hardware.bluetooth
android.hardware.sensor.light
android.hardware.microphone
android.hardware.camera.autofocus
android.software.live_wallpaper
android.hardware.telephony
android.software.sip
android.hardware.touchscreen.multitouch.jazzhand
android.hardware.touchscreen.multitouch
android.hardware.faketouch
android.hardware.camera
android.software.sip.voip
android.hardware.sensor.proximity
android.hardware.location.gps
android.hardware.telephony.gsm
android.hardware.camera.front
android.hardware.touchscreen
android.hardware.sensor.accelerometer
glEsVers=2.0
JavaProperties
java.vendor.url: http://www.android.com/
java.class.path: .
java.class.version: 50.0
os.version: 3.0.13
java.vendor: The Android Project
user.dir: /
user.timezone: null
path.separator: :
os.name: Linux
os.arch: armv7l
line.separator:
file.separator: /
user.name:
java.version: 0
java.home: /system
Mount points
MountPoint
Name Type Options
- /
rootfs rootfs ro,relatime
- /dev
tmpfs tmpfs rw,nosuid,relatime,mode=755
- /dev/pts
devpts devpts rw,relatime,mode=600
- /proc
proc proc rw,relatime
- /sys
sysfs sysfs rw,relatime
- /acct
none cgroup rw,relatime,cpuacct
- /mnt/asec
tmpfs tmpfs rw,relatime,mode=755,gid=1000
- /mnt/obb
tmpfs tmpfs rw,relatime,mode=755,gid=1000
- /dev/cpuctl
none cgroup rw,relatime,cpu
- /system
[email protected] ext4 ro,noatime,user_xattr,commit=1,barrier=1,data=ordered,noauto_da_alloc
- /data
[email protected] ext4 rw,nosuid,nodev,noatime,user_xattr,barrier=1,data=ordered,noauto_da_alloc
- /cache
[email protected] ext4 rw,nosuid,nodev,noatime,user_xattr,barrier=1,data=ordered,noauto_da_alloc
- /mnt/sdcard2
/dev/block/vold/179:25 vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro
- /mnt/sdcard
/dev/block/vold/179:4 vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro
- /mnt/secure/asec
/dev/block/vold/179:4 vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro
- /mnt/sdcard/.android_secure
tmpfs tmpfs ro,relatime,size=0k,mode=000
- /mnt/asec/com.svox.pico.voice.eng.usa-1
/dev/block/dm-0 vfat ro,dirsync,nosuid,nodev,relatime,uid=1000,fmask=0222,dmask=0222,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro
- /mnt/asec/root.world.guide.free.remzi.cavdar.open.remzicavdar-1
/dev/block/dm-1 vfat ro,dirsync,nosuid,nodev,relatime,uid=1000,fmask=0222,dmask=0222,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro
- /mnt/asec/pl.pawelbialecki.smartsysteminfo-1
/dev/block/dm-2 vfat ro,dirsync,nosuid,nodev,relatime,uid=1000,fmask=0222,dmask=0222,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro
Click to expand...
Click to collapse
it has few issues ..[except rooting all is stock as of now]
1: GPS not working Working after new rom, but weak signals [edit date : 9th january 2012] :good:
i cannot make the gps locked onto satellites .. i have tried a lot of gps softwares like ulysse and others.. but even after hours of being under open sky i wasnt able to get it locked .. i used the agps and the epo .. still no luck .. using the EngineeringMode and going to ygps i could only lock it onto 5 satellites .. but its signal was very weak .. it quickly lost that .. so is tehre any solution ? also i tried it under open sky and also tried it on samsung galaxy mini and had no issue in locking onto sattellite ..
2: Camera not taking pics in full resolution now its natively taking pics in 8MP and quality is also improved . but other apps still show image inverted in viewfinder . only UCAM shows correct orientation. [edit date : 9th january 2012] :good:
it has 8 MP camera but android is only taking pics in 5 MP and i cant seem to find any settings for setting it to take pics in 8mp. i have tried another app Camera FV-5 and was able to take pics in 8 MP .. but that app and all other apps that i tried gives me the inverted viewfinder and i couldnt find a way to correct that ..
3: Compass showing wrong direction still showing wrong orientation . [edit date : 9th january 2012] :crying:
when i use compass app it shows wrong orientation .. it shows east as west and west as east .. i have checked it in open space and my other phone samsung galaxy mini had no issue in telling me the direction ..
4: SD Card Size is shown highly inflated: see pics .. the last 2 are from link2sd now all the sizes are shown correcty after update of new rom [edit date : 9th january 2012] :good:
sd card size is wrongly reported .. very inflated size is shown .. in this circumstances the internal sd card /builtin sd card is 2gb .. and external sd card is having 2 partitions one is 2gb other is approx 12gb. as correctly shown by link2sd (pics given below) and many other apps... though the card is ok .. tested on my pc .. its original sandisk card . and works ok on other original sets .. i.e. its shown correct size there .. also correct size is shown on pc ..
also other softwares on this set report its size correctly.. like link2sd and other system info tools..
5: Only one IMEI is shown. well still i have only one imei . but no issue due to it .. [edit date : 9th january 2012]
originaly this set had one micro sim slot . but on probing the sticker i found anothe mini sim slot .. and i removed the plastic wrapper a bit and inserted another sim .. and now my phone is double sim.. both sims are working .. i havent checked them thoroughly .. but i can recieve sms and ring on these sims .. no issue . but when i enter *#06# only one imei is shown .. ? why shouldnt it display 2 ? also when i enter factory mode it shows both imeis .. Strange .. anomaly..
6: No Google Talk present. though i have google play i got it working .. [edit date : 9th january 2012] :good:
it lacks google talk . though it has google play. i also need gtalk on it.
7: Is it realy MT6575 as shown by various softwares etc or is it MT6515 stil dont know . but it should be mt6575 ? [edit date : 9th january 2012]
many fellows here bricked their similar mt6575 devices and in the proces of resurecting it they found it to be mt6515 not mt6575 as intialy shown to them .. so how can i tell which is mine in reality apart from prying it open. i am currently using it on GSM network. in the process of installing CWM i used Scatter file of MT6575 . also when i used mtkdroid tools 2.3 to take backup .. i then used MTK Rom Studio to build the scatter file from the firmware.info file generated by the MTK droid .. when i saved the file created by MTK studio it automatically named it as scatter file for mt6515 .. strange ? that makes me suspicious. i am attaching my generated scatter file . it is same as that of mt6575 .
i am posting few pic .. and also attaching them in full resolution as xda downsized their resoution .
waiting for any help thanks
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
EDIT ( 9th January 2012)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
after flashing new rom . i corrected few issues ..
here is the link to the new firmware .. i have uploaded it .. just extract it and flash it on your own risk .
AND DO NOT FLASH PRELOADER AND DSP_BL..
http://www.mediafire.com/download.php?8i7848pl660dqh1
and here is the working CWM .. its working for me ..
if u have tried the cwm which is floating on this site and is approx 4.5mb and that didnt worked for u .. and u have urs recovery.img approx 6 mb .. this may work ... again at your own risk .
http://www.mediafire.com/?acbbhu7lq1lrq8v
this worked for @boybakat .. look at post #38 of this thread.
-------------------------------------------------------------
EDIT ON 24/01/2013
some people report this one to be stock 3e recovery .. please verify if its cwm or 3e stock one .. it seems i am posted wrong link..
here is the cwm link .
http://www.mediafire.com/?ze0dt144op95rca
have you tried GPS FIX? someone says it's the only one worked for him.. or his mobile, but you should try it.
Xazdron said:
have you tried GPS FIX? someone says it's the only one worked for him.. or his mobile, but you should try it.
Click to expand...
Click to collapse
i have exactly the same issue , i have try also GPS fix and doesn't work.
the bluetooth also doesn't work on my, have you the same issue ?
I have one problem on my side:
i have remove samsung apps from the sys ( it's was the chinese version of the apps) and forgot to made a backup and install the samsung apps (french version) on the SD card but now when i restart the system, I have an error message that "the lockscreen is invalid".
I can use all other thinks execpt of the phone and SMS.
what can i do ?
reflash it with the original ROM ??
i have tried many gps fix apps .. but non seem to work ..
also camera issue is still there ..
one more issue my phone is double sim physically ... but in the dialer when i enter *#06# i just get one imei .. not two .. but both of my sims are working i can recieve sms on them .. though i have not tried outgoing calls on them ..
All right. You will be one bear. Only in the original device has two receivers. And could you put your uboot.bin Can you put boot.bin to the working chamber.
files.mail.ru/BJYLV5
khankll said:
i have tried many gps fix apps .. but non seem to work ..
also camera issue is still there ..
one more issue my phone is double sim physically ... but in the dialer when i enter *#06# i just get one imei .. not two .. but both of my sims are working i can recieve sms on them .. though i have not tried outgoing calls on them ..
Click to expand...
Click to collapse
As for your SD card showing the wrong size, try -- assuming your phone doesn't use MTP -- to format it in Windows. Connect mass storage as usual, then go to 'my computer' on your computer and format the drive.
is it necessary to do it this way?
but when i remove the card and place it on any device i get correct size . moreover putting an ok sd card in this set shows its size wringing
Long and short the card is ok and perfect but phone is reporting it wrong
Thanks
stendal22 said:
All right. You will be one bear. Only in the original device has two receivers. And could you put your uboot.bin Can you put boot.bin to the working chamber.
files.mail.ru/BJYLV5
Click to expand...
Click to collapse
Didn't got you bro
What u mean.
I tried that site but don't know what to do.
I assumed u to want me to put the two files on that site but... But i couldn't find those files on my device where r they. I have root explorer
boot.bin stitched through software SP_Flash_Tool_v3.1224.01
translate.google.com.ua/translate?sl=ru&tl=en&js=n&prev=_t&hl=ru&ie=UTF-8&eotf=1&u=http%3A%2F%2Fforum.china-iphone.ru%2Fviewtopic.php%3Fp%3D697402%23p697402
stendal22 said:
boot.bin stitched through software SP_Flash_Tool_v3.1224.01
translate.google.com.ua/translate?sl=ru&tl=en&js=n&prev=_t&hl=ru&ie=UTF-8&eotf=1&u=http%3A%2F%2Fforum.china-iphone.ru%2Fviewtopic.php%3Fp%3D697402%23p697402
Click to expand...
Click to collapse
its very cryptic english
can someone plz guide me hot to get the above two files ?
stendal22 said:
boot.bin stitched through software SP_Flash_Tool_v3.1224.01
translate.google.com.ua/translate?sl=ru&tl=en&js=n&prev=_t&hl=ru&ie=UTF-8&eotf=1&u=http%3A%2F%2Fforum.china-iphone.ru%2Fviewtopic.php%3Fp%3D697402%23p697402
Click to expand...
Click to collapse
i have zipped
boot.img
uboot.bin
About the card showing the wrong size, i think it is about Chinese modification. They jinx the phone to make the storage look larger. I got one of this kind too.
The internal storage is only 2GB but it shows 16GB. When I put 8GB SD Card, it shows that i've 64GB. So I guess they did modify settings.apk make it multiply by 8.
I'm trying to find the cultpit but no luck right now. I would like to make it show correctly too. If you find one, please lets me know.
O yes.but someone who has done some kernel work will be able to correct it.
What device you have? And what is the camera resolution ? Does it takes pics with that resolution?
And what about other issues?
Thanks
any mtk expert who can help in any of above raised questions ?
khankll said:
ant mtk expert who can help in any of above raised questions ?
Click to expand...
Click to collapse
hi krankll,
i have the same clone but i remove some file and now the phone doesn't work.
Can i have a backup of our ROM, like this i can flash my clone
thanks
vince_touve said:
hi krankll,
i have the same clone but i remove some file and now the phone doesn't work.
Can i have a backup of our ROM, like this i can flash my clone
thanks
Click to expand...
Click to collapse
o yes .. tell me what file you need ?
:victory:
and can u tell me if u are also facing the above issues ?
when u take pic .. go to gallery and the press menu and details .. what it shows in width hight and file size ?
khankll you're right about the picture. I just check the resolution and it is only 5MP.
About the camera, try to use "UCam" it does take the photo in 8MP and have Revised View. So you can make the correction of the reverse image.
Thought that doesn't help much since the real camera's hardware is 5MP CMOS and 8MP is interpolate by driver. I did compare 8MP and 5MP picture. It not much different.
About the GPS, try A-GPS and then turn off the data. It will help alot.
Where I Can Download Samsung Galaxy S3 Original BootAnimation With Resolution 480*800??
I Already Try To Apply 720*1280,,Its Work..But The Picture Too Large In My Screen..
N When I Edit Desc.txt To 480*800,,Its Not Work..Only BlankScreen.
vourfa perhaps
khankll said:
o yes .. tell me what file you need ?
:victory:
and can u tell me if u are also facing the above issues ?
when u take pic .. go to gallery and the press menu and details .. what it shows in width hight and file size ?
Click to expand...
Click to collapse
hi,
i have exactly the same issues but also the bluetooth doesn't work.
the resolution of the picture is 2800x1600 the size is 540Ko (4Mo instead of 8Mo)
for the backup, you need to enter in recovery mode (power+vol down )
and choose backup user data.(recovery.jpg)
validate with option button
start the backup with home button.(backup.jpg)
a file will be created on the SD card called userdata_date of the day_some number.backup(backup2.jpg)
its take around 10 min
it's this file that i need.
vince_touve said:
hi,
i have exactly the same issues but also the bluetooth doesn't work.
the resolution of the picture is 2800x1600 the size is 540Ko (4Mo instead of 8Mo)
for the backup, you need to enter in recovery mode (power+vol down )
and choose backup user data.(recovery.jpg)
validate with option button
start the backup with home button.(backup.jpg)
a file will be created on the SD card called userdata_date of the day_some number.backup(backup2.jpg)
its take around 10 min
it's this file that i need.
Click to expand...
Click to collapse
Ok i will do that in the evening.but i have a concern as its been my primary device so it has lots of personal data like account passwords phone numbers messages emails etc so will that also be copied over there? How to ensure my privacy.
Also i do not have stock recovery . I have cwm. So will that also create backup? Heard cwm doesn't works with stock roms .
Oh my boot logo does says Samsung but it also has mediatek logo in the very beginning .
Also do u ppl face the card size issue?
Thanks

[Q] I need a rom for Goohone I5

Hello everyone and thank you for the work you do. I am a new user and I recently purchased a goophone I5. it is very nice and is very fast (1536MHz (x2) with AnTuTu Benchmark 8540) but I have a problem. the phone does not mount sd card, so I decided to change rom and recovery.
with mobileuncletools I read:
Ok root (superuser already installed)
CPU
Processor = 7 ARMV processor rev. 0 (V7L)
hardware = MT6589
KERNEL
Kernel = linux version3.0.13 (root @ versionserver-desktop) (gcc version 4.4.3 (GCC)) # 1 SMP PREEMPT fri 8 March 2013 14:13:50 CSt
OS
Brand = alps
Models = iPhone5
Product = mobitak77_m01_ics2
Display = ALPS.ICS2.MP.V1.18
SCREEN
Width = 480
Higth = 854
Density Dpi = 240
RAM MEMORY
Mem total = 1922480Kb
Help me
thanks

Are there any options (rom) for this phone?

Hi. I have a iPhone 4S look a like (china import). The specs for the phone are as followed:
Model = i04S
OS Version= 4.0.9
CPU TYPE = mt6573
CPU TYPE 2= MT6573
Model= ALPS.GB.FDD2.MP.V2.18
Device Info 1 = MAUI.11AMD.W11.37.SP.V23.F3, 2012/03/27 19:44
Currently it is running a laggy ios5 layout. Is there any possible way for me to install a stock android or any other rom? Thanks:laugh:

Upgrade an rk3168 tablet, from 4.2.2 to a better rom, or how to backup rom??

Happy new year, in the first place!
Maybe i posted this in the wrong thread, due to my questions, i will try here..
I thought after reading and reading on inet...Gone try here to get a little bit further with a simple but brand new tablet i got from my mother.
That's also the reason why i don't throw it away, i thought lets see if there is a possibility to make it run better then with the stockrom.
And if there is no solution to flash it, what is the best way to backup the rockchip 3168 with 4.2.2 rom off the tablet itself?
Also to try other roms, i don't wane lose my bootloader etc.
Its a new tablet, but the hardware is older and because of that i thought lets see if i can get it maybe a little bit upgraded on the software side.
And if not, maybe another solution.
Therefore i searched a lot, but has anyone....Anyone maybe a direction to look for a maybe better rom.Also with cwm there is nothing what works with this chip, everything based on the maligpu400 or maybe also with the powerVr Sgx 540?
Other solution would be to backup the rom, and clean afterwards the stock rom.But i got stuck in how and what is the best way to do that.
I cant install Cwm recovery, when it installs it doesn't continue.
I also read that people lost their original bootloader, and because i cant find the stockrom online...What would be the best way to do that, i saw the app mtk, and the Rockchip tool but that seemed a lot off work and if i mess up my backup would never work.
Or is it the only way to back up this rom from Rockchip, a full backup kerel, loader etc..
And to try out a rom, install from sd card, and to get back on the stockrom a factory reset is all, or mess i up the recovery installing another rom?
If more info is needed about the chips, let me know.
Thanks ahead!
I will put the specs down here:
- System info droid -
Summery :
Brand name: Empire Electronix (Manufacture :Rockchip)
Device : Rockchip M1002B
Android :4.2.2
Processor : RK30board-ARMv7 Processor rev 0 (v7l)
Cpu Max Freq : 1200 Mhz
Cores : 2
System Ram : 1.00GB (Some apps say 1500mb)
Audio Chipset : Rk30sdk
Internal Storage : 1008Mb(132 mb free)
Internal SD : 8gb
GPU : Imagination Technologies PowerVR SGX 540
Display Size : 10.1inch - 1024x600Resolution
Screen Density : 90 ppi (160dpi)
Refresh Rate : 82.34 Hz
Back Camera : 1.9 MP(some apps : 2Mp)
Front Camera : 0.3 Mp
System :
Model : M1002B
Manufacture : Rockchip
Android : 4.2.2
Api Level : 17
Kernel : 3.0.36+20131118....
Compilation : V1.01.JDQ39...
Processor :
Processor : Rk30board
Instructions sets : armeabi-v7a, armeabi
Max Freq : 1200Mhz
Gpu :
Model : PowerVr SGX 540 + Output (Mini Hdmi 1920x1080)
Vendor : ITechnologies
OpenGL Version : OpenGL ES 2.0
Advanced Info:
Viewport size : 2048 x 2048
Sensor :
Freescale Semiconductor
Power C : 0.2mA
Max Range : 39.24
Resolution : 0.15328126
Other chips plus board descriptions :
RK30Board
Rockchip616
S-ilead GSL3680
uP6636Q-PGK38L
Wifi lost number of the chip, was realtek with tv in it.Must make new picture to find out but seemed pretty standard wifi Bgn chip.
Buttons : 3 - Power-Volume up/down
Ports : Mini USB2 OTG - Mini Hdmi(DD-DD5.1) - HeadphoneJack - Mic - MiniSD Card slot-
Rooted.
Roberto.
Were you able to figure this out?
I will try it and let you know if I have any problems? Thanks a lot.

Wiko Ride 3, mt6762, $35 at Walmart on Boost Mobile

Anyone had any luck rooting this phone? I've had updates, so mtk-su didn't work when I tried it, but I'm anxious to know if it works on a clean factory install.
If you have any experience with this phone please share!
Thanks,
Karl
Also here's the device info:
Device Info 3.2.4 Date Created 2021-10-09 21:02:45 Device -------------------------------------------------------- Device Name : Wiko Ride 3
Model : Wiko U614AS
Manufacturer : TINNO
Device : U614AS
Board : U614AS
Hardware : mt6762
Brand : WIKO
Build Fingerprint : WIKO/U614AS/U614AS:11/RP1A.200720.011/1629894660:user/release-keys USB Host : Supported CPU --------------------------------------------------------
SoC : u614as (no) no
Processor : U614AS
CPU Architecture : 4 x 2.00 GHz 4 x 1.50 GHz Supported ABIs : arm64-v8a, armeabi-v7a, armeabi CPU Hardware : MT6762V/CA CPU Type : 64 Bit CPU Governor :
Cores : 8
CPU Frequency : 400 MHz - 2001 MHz GPU Renderer : PowerVR Rogue GE8320
GPU Vendor : Imagination Technologies
GPU Version : OpenGL ES 3.2 build [email protected]
Random Access Memory ------------------ Total : 2829.0MB Available : 765.0MB Used : 2024.0MB Used Percentage : 72% System Storage ------------------ Total : 1.58GB Available : 0.00GB Used : 1.58GB Used Percentage : 100% Internal Storage ------------------ Total : 23.45GB Available : 3.27GB Used : 20.17GB Used Percentage : 86% External Storage ------------------ Total : 29.79GB Available : 20.37GB Used : 9.43GB Used Percentage : 31% Camera -------------------------------------------------------- Camera - 0 ------------------ Position : Back Mega Pixels : 9.4 MP Resolution : 4160x1872 Focal Length : 3.519mm Camera - 1 ------------------ Position : Front Mega Pixels : 3.7 MP Resolution : 2560x1440 Focal Length : 2.25mm Camera - 2 ------------------ Position : Back Mega Pixels : 1.9 MP Resolution : 1600x1200 Focal Length : 1.928mm Camera - 3 ------------------ Position : Back Mega Pixels : 9.4 MP Resolution : 4160x1872 Focal Length : 3.54mm
did you get your boatloader unlocked ? i saw an ad for flashing wiko system software cant find the link, it would be great to have a dump or stock.zip
MT6765_Android_scatter
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
this needs to be edited..
try mtkclient on windows to unlock boatloader igot a dump made give me a reply thanks ed ?
I'll have to factory reset to get a stock dump for you, I might have time to pull it off tomorrow if you really need it, I've been wanting to try it anyway to see if mtk-su will work before any updates come through
And no, it says unrecognized command when I execute the flashing unlock command
i just have a tablet p.c so I couldn't get python and mtkclient to work for some reason, but after reading some more, nck-dongle and some other box dongle s offer the boatloader unlock. get the boot.img flash magisk - unlock boatloader for mt8762 ? right
mtk-su isn't going to work I tried it, it was patched after 2019 on most phones
those are 50 bucks and up, there's a slew of dongles on the market, theres a couple other no-box mtk boatloader unlock tools I'm looking for, if they don't work the phone is patched and won't unlock

Categories

Resources