I soft bricked my AT&T M8 and am hoping some of the great minds here at XDA can help. Unfortunately, this happened back in September so I've forgotten a lot of what I did to get myself in this mess, but I will try to remember as best I can.
I had originally modified my MEID and was running a GPE ROM. When an OTA update was pushed by Google, I foolishly tried to install it and the phone became stuck in a bootloop. I tried to rectify the situation by performing a system wipe, relocking the bootloader, and running the stock AT&T RUU from the SD card. The RUU failed to run and I received "ERROR 159." I am now stuck with the stock recovery image and my device is no longer recognized in fastboot.
First 6 lines of text on the HBoot screen:
*** TAMPERED ***
*** RELOCKED ***
*** Security Warning**
M8_UL_CA PVT SHIP S-ON
HBOOT-3.18.0.0000
RADIO-1.16.21331931.LA11G
OpenDSP-v38.2.2-00542-M8974.0311
OS-
eMMC-boot 2048MB
Jun 16 2014,18:47:55.0
Output of fastboot getvar all:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.18.0.0000
(bootloader) version-baseband: 1.16.21331931.LA11G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxx (this was populated, I just masked)
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 6e0f5a3d
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done! finished. total time: 0.013s
Correction, I think it was a GPE RUU that I had installed and not a ROM because my recovery screen is black. I read in another thread that a black screen may indicate this.
I unlocked my bootloader, installed TWRP, and installed Android Revolution 22.1 and the phone still will not boot past the HTC splash screen. I also tried both available RUUs; 1.58 and 2.23. Any suggestions?
I think youd have to revert back to mid of sense version. if s-on I am not sure how you got it to convert in the first place.As I havent ever liked or had the idea of changing the device to gpe. Maybe in the conversion thread you used to convert the device that got you to this point. Are you able to install a gpe rom? I am unfamiliar with ARHD builds
I also have no clue how you got as far as you did without S-OFF. You shouldn't have been able to run a GPE RUU.
ARHD also won't play nice without the 3.x firmware.
Try the desktop .exe versions of the RUUs, if you haven't already, and make sure the md5 matches.
If you can still get twrp on your phone, try restoring a 1.12 or 1.54 backup from here http://forum.xda-developers.com/showthread.php?t=2701376 or http://forum.xda-developers.com/att...nt/att-stock-backups-recoveries-otas-t2855966.
Make sure to factory reset in twrp.
Your cid and mid are still at&t stock, so I don't think those are the cause of your problem. The fields where the firmware version should be displayed are empty though, and I don't know how you got to that state.
If none of that works, then I'd try a 4.4.4 based GPE rom that still works with the 2.x firmware, like an older version of skydragon. An older version of a sense based rom still using 4.4.3 might still work.
Related
hello dear friends; here is lots of expert users in the forum;
I bought an AT&T phone, the seller ask me to do it is s-off, I said yes;
Everything was working fine, but when I wanted to update its ROM to ARHD 41 (4.4),
My phone became just a waste for me
I can enter hboot, I could upload a twrp 2.6.3.3, I can use adb sdeload,
And also I can flash a ROM, but; it is not starting,
when I power on it, HTC logo is showing, it is getting a Reset and after this it is directly going yo TWRP screen
and then doing this in a loop
There is no expert to correct this problem in my country
And the service will not repair it because it is an AT&T device.
If one of you be my guide, I will be greatful to you
I have tried too many things and now I am very tired to try something
I also changed the cid to upload a new ruu, or I tried to make partitions again etc etc ((((
By the way I cannot wipe the phone from TWRP, it is getting an error : unable to mount /cache and /data
If you explain me what to do step by step I can easily apply it.
Which raido? Which firmware? Which rom? Which RUU? etc... To give it a life again
My main target is to use a stable and fast custom rom. (Like maximus or arhd)
Current infos:
***UNLOCKED***
M7_UL PVT SHIP S-OFF RH
CID-11111111
HBOOT-1.54.0000
RADIO-4A.22.3263.14
OpenDSP-v32.120.274.0909
OS-4.06.1540.2
eMMC-boot 2048MB
Nov 21 2013, 20:19
Here is current getvar all result:
D:\HTC>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.22.3263.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.06.1540.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT38CW1234566
(bootloader) imei: xxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN071****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4333mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-5d4c562c
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
skuyumcu said:
hello dear friends; here is lots of expert users in the forum;
I bought an AT&T phone, the seller ask me to do it is s-off, I said yes;
Everything was working fine, but when I wanted to update its ROM to ARHD 41 (4.4),
My phone became just a waste for me
I can enter hboot, I could upload a twrp 2.6.3.3, I can use adb sdeload,
And also I can flash a ROM, but; it is not starting,
when I power on it, HTC logo is showing, it is getting a Reset and after this it is directly going yo TWRP screen
and then doing this in a loop
There is no expert to correct this problem in my country
And the service will not repair it because it is an AT&T device.
If one of you be my guide, I will be greatful to you
I have tried too many things and now I am very tired to try something
I also changed the cid to upload a new ruu, or I tried to make partitions again etc etc ((((
By the way I cannot wipe the phone from TWRP, it is getting an error : unable to mount /cache and /data
If you explain me what to do step by step I can easily apply it.
Which raido? Which firmware? Which rom? Which RUU? etc... To give it a life again
My main target is to use a stable and fast custom rom. (Like maximus or arhd)
Current infos:
***UNLOCKED***
M7_UL PVT SHIP S-OFF RH
CID-11111111
HBOOT-1.54.0000
RADIO-4A.22.3263.14
OpenDSP-v32.120.274.0909
OS-4.06.1540.2
eMMC-boot 2048MB
Nov 21 2013, 20:19
Here is current getvar all result:
D:\HTC>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.22.3263.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.06.1540.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei: xxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN071****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4333mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-5d4c562c
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Click to expand...
Click to collapse
Edit your post and remove your serial no and the modelid was ok to leave. you already said it's at&t.
you said you flashed recovery
did you clear cache after ?
did you check the MD5 of the rom you downloaded before flashing it ?
your phone shows it was developers edition last .. is this correct ?
your probably going to need to RUU back to stock.
but first try booting to bootloader fastboot USB
and from your pc
fastboot erase cache
fastboot reboot-bootloader and try and flash your Rom again (if it passed the md5 check)
hello clsA; thank you very much for your quick answer, I edit the message and delete the serial but you quoted it
I have made all the things you wrote; but Suddenly I solve the whole problem
When I tried to install SuperSU in TWRP; everything was gone right!
I flashed the ARHD 41, and it is working now
I was trying to fix this problem for 48 hours
at&t htc one m7 problem
But Dear clsA; you can still help me about something; what firmware and radio versions would be your suggestions?
I am living in Turkey, my carrier supports HSPDA
Kind Regards
skuyumcu said:
But Dear clsA; you can still help me about something; what firmware and radio versions would be your suggestions?
I am living in Turkey, my carrier supports HSPDA
Kind Regards
Click to expand...
Click to collapse
The firmware your on now should be fine ..are you getting poor signal of other problems ?
at&t htc one m7 problem
Actually I have no problem; It's signal bars are indicating lower than my old IPhone 4S,
but its coverage and signal quality(also sound quality) is much better than it
I just wanted to be sure by asking you,
And another thing it is writing a caution with red color while booting (This rom is a development purposes only etc. bla bla bla)
This is not bothering me, it can write, if there won't be any problem with stability or performance
Thank you again for your answers
skuyumcu said:
Actually I have no problem; It's signal bars are indicating lower than my old IPhone 4S,
but its coverage and signal quality(also sound quality) is much better than it
I just wanted to be sure by asking you,
And another thing it is writing a caution with red color while booting (This rom is a development purposes only etc. bla bla bla)
This is not bothering me, it can write, if there won't be any problem with stability or performance
Thank you again for your answers
Click to expand...
Click to collapse
your fine ..enjoy your phone
Hi!
After reading massive amounts of tutorials and forums, I just have to admit I cannot handle this and a little help would be nice!
I just bought a nice second hand HTC One (the European m7_ul version, it seems) and there is a big problem: I cannot install any ROMs and the phone just kind of gets into a boot-recovery (ClockworkMod) loop.
This phone has been ridiculously tampered with no knowledge, so it's very hard to pinpoint what on earth has happened in the past. That is why I got it quite cheap. Nice, but now it does not work as a phone at all after I tried some recovery techniques myself.
THE HISTORY AS FAR AS I UNDERSTAND:
-The phone has been first rooted in order to install custom ROMs: Android Revolution HD etc I think.
-It has also been S-offed
-The original user tried to do a "Total factory reset", he wanted the phone to be completely "Stock". He failed-ending up with S-On BUT Tampered/Unlocked etc..
WHAT HAVE I TRIED:
-Tried to OTA Update as the system offered this option. Didn't work, because of Status 7 error on ClockWorkMod.
-Same problem with all of the ROMs I downloaded and then tried to install from SDcard/Sideload (Status 7 error)
-Tried also fastboot flash recoveries, just ending up in a boot loop with HTC logo and sometimes even the exclamation mark+red triangle.
-Frustrated and tired, tried also several instructed ways of S-OFF (Which probably was a dumb idea also).
THE STATUS NOW:
-HTC One only boots into the HTC Logo Screen/ClockWorkMod, but does not let me install any of the ROMs I've tried.
INFO:
Fastboot getvar all gives me:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__Y13
(bootloader) battery-status: good
(bootloader) battery-voltage: 4010mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d16dc66985
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
I also got some info from the last known working system while it still was running, before the stuck-in-boot-loop-era:
Android Version 4.3
Sense 5.5
Version 3.62.401.1
HTC SDK API 5.65
Build 3.62.401.1 CL264544 release-keys
The big question: IF it was first rooted, s-offed and then messed up completely (S-on seems to be now forever), is there still hope to get it to work?
--
UPDATE: Got it booting after installing Android_Revolution_HD-One_51.0, which seems to work OK. Normal fastboot sideload installation. I think this phone has been locked (S-ON) while using this exact ROM (Android_Revolution_HD-One_51.0, even the build numbers seem to match with the previously mentioned system. Still, no other ROM can be installed on this phone.
So, seems like we're just stuck with Android 4.3 and I need to backup closely. Am I completely lost with this S-ON theory?
--
Thanks!!
Currently I am running CM12 and here is my firmware info:
M8_UL_CA PVT SHIP S-ON
HBOOT-3.19.0.0000
RADIO-1.21.213311491.A04G
OpenDSP-v47.2.2-00564-M8974_FO.1024
OS-
eMMC-boot 2048MB
Dec 2 2014,22:40:49.0
I have been trying all day to downgrade to 4.4.4 using RUU and zip files but no luck so far.
I have decided to finally go for sunshine. BUT sunshine wants me to use a stock or near stock rom. What rom would you suggest me to install? Or what other options do I have at this point?
devbro said:
I have been trying all day to downgrade to 4.4.4 using RUU and zip files but no luck so far.
Click to expand...
Click to collapse
You are only "downgrading" the ROM, not the firmware. RUU should work fine, as long as its the AT&T 4.4.4 RUU. Did you relock the bootloader? Any error messages for the RUU?
No idea what "zip files" you are trying to flash (stock ROM, firmware, zip full of porn?) as you are the opposite of specific.
devbro said:
I have decided to finally go for sunshine. BUT sunshine wants me to use a stock or near stock rom. What rom would you suggest me to install? Or what other options do I have at this point?
Click to expand...
Click to collapse
Its pretty self explanatory, a stock AT&T ROM is your best best.
redpoint73 said:
You are only "downgrading" the ROM, not the firmware. RUU should work fine, as long as its the AT&T 4.4.4 RUU. Did you relock the bootloader? Any error messages for the RUU?
No idea what "zip files" you are trying to flash (stock ROM, firmware, zip full of porn?) as you are the opposite of specific.
Its pretty self explanatory, a stock AT&T ROM is your best best.
Click to expand...
Click to collapse
I keep on getting error 155 from RUU. and attempting to lock bootloader gives me SPMI write failure.
I have tried this file last:
http://dl3.htc.com/application/RUU_...40.45.C33065.00_F_release_426617_signed_2.exe
still no go
To confirm, your bootloader currently says UNLOCKED?
What is your current CID?
redpoint73 said:
To confirm, your bootloader currently says UNLOCKED?
What is your current CID?
Click to expand...
Click to collapse
My bootloader is unlocked.
cid: CWS__001
here is a fastboot getvar all:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.21.213311491.A04G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: FA45AWM06131
(bootloader) imei: AAAAAAAAAA
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: c88f4560
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.073s
Everything on the phone looks okay to run an AT&T RUU. It sounds like you tried more than one, so that pretty much eliminates the possibility the RUU file was damaged/corrupt, etc.
Did you by change convert to GPE (black bootloader screen)?
I have an AT&T M8 which has an old version of the GPE SkyDragon ROM installed.
Bootloader is unlocked, S-ON is still ON.
Android version: 5.0.1
Baseband version: [email protected]_40.34.C35006.02_F
Kernel version: 3.4.0-SkyDragon-V3.0.7 from Jan 2014.
Build number: SkyDragon - LRX22C.H5
I want to send this phone to another country, and for that I need to get it sim-unlocked. I got the unlock code from AT&T, but it doesn't work - I am assuming the ROM is at fault, so I am trying to get the phone back to full stock by flashing an official RUU.
I downloaded the latest official RUU from http://www.htc.com/us/support/htc-one-m8-att/news/, but I cannot get it to flash!
When trying and the phone is booted to regular android, it tells me about error 170, which, as I gather, means it cannot find the phone.
I installed HTC Sync, and that can't find the phone either.
If I reboot to bootloader, the RUU installer finds the phone, but after the HTC logo (silver with black background) shows up on the phone, it throws error 171.
It feels like I need to relock the bootloader but I am afraid to mess it up now.
Please help with some guidance..
Here is the bootloader screen:
Edit: Found an old RUU on my hard drive, version 3.42.502.1 - same as OS version in the screenshot.
I attempted to flash it (using the official exe). It failed on "updating signature" with error 155.
Edit2: Made sure CID and MID match original - they do.
Attempted 'fastboot oem lock'. Now trying to flash the old RUU again.
Edit3: Looks like it's working! RUU is progressing further than ever before.
Edit4: It worked! Booting to Sense now.
Edit5: SIM unlocked worked too, phone is ready to go.
I'll leave this post up in case someone else faces a similar situation.
To run the Marshmallow RUU, try to flash the MM firmware first. See the red font note under the RUU section of my Index thread: http://forum.xda-developers.com/showthread.php?t=2751432
I was actually able to just flash the latest official RUU over 3.42.502.1 without the need for commandline.
Back to Stock
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: [email protected]
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.20.502.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT45SWM06618
(bootloader) imei: XXXXXXXXXXXXXXX ( Deleted)
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.125s
Bootloader - Unlocked
Recovery - TWRP
Rooted - Yes
Custom ROM - Resurrection Remis 5.8.5 Final
if want to go back to stock what is procedure
i have below RUU
RUU_M8_UL_M60_SENSE70_ATT_MR_Cingular_US_6.20.502. 5_combined.exe
can i run this exe after relock the bootloader?
Appreciate any help. I'm considering all options. My phone got stuck on the boot screen after taking a security update and I was wondering if it's possible to just flash the Marshmallow RUU , i don't mind losing the data its already backed up.
Unlocked bootloader, S-OFF
Variant - M8_UL_CA
CID - BS_US001
OS - 4.16.1540.8
You'll need to flash the MM firmware first (this is a peculiarity with the MM RUU - if you don't the RUU will fail with Error 155), then flashing the RUU is fine.
Also, in the current configuration, you'll need to flash the Developer's Edition RUU (not sure if that is what you meant).
But otherwise, if you are fine with losing your data, I don't seen an issue with running the RUU.
Back to stock
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: [email protected]
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.20.502.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT45SWM06618
(bootloader) imei: XXXXXXXXXXXXXXX ( Deleted)
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.125s
Bootloader - Unlocked
Recovery - TWRP
Rooted - Yes
Custom ROM - Resurrection Remis 5.8.5 Final
if want to go back to stock what is procedure
i have below RUU
RUU_M8_UL_M60_SENSE70_ATT_MR_Cingular_US_6.20.502. 5_combined.exe
can i run this exe after relock the bootloader?
safrassm said:
Bootloader - Unlocked
Recovery - TWRP
Rooted - Yes
Custom ROM - Resurrection Remis 5.8.5 Final
if want to go back to stock what is procedure
i have below RUU
RUU_M8_UL_M60_SENSE70_ATT_MR_Cingular_US_6.20.502. 5_combined.exe
can i run this exe after relock the bootloader?
Click to expand...
Click to collapse
Yes.
Need Ruu .zip for HTC M8 for this variant
< waiting for device >
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.09.20.1112
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA46DSF03997
(bootloader) imei: 990004992158356
(bootloader) imei2: Not Support
(bootloader) meid: 99000499215835
(bootloader) product: m8_whl
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B70000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.019s
Bootloader - Unlocked
Recovery - TWRP
Rooted - yes
Custom ROM - lenage 14.1
shihab94rs said:
74616699(bootloader) product: m8_whl
(bootloader) modelid: 0P6B70000
Click to expand...
Click to collapse
The info above indicates you have the Sprint version. This forum section is specific to the AT&T version M8.
The RUU zips you are looking for, are here: https://forum.xda-developers.com/showthread.php?t=2729173
Also, you should delete your IMEI, serial number, and MEID from the getvar data. Those are personal info, that should never be posted in open forums.
help
Good evening,
I currently have an HTC one M8 under:
version Android: 5.0.2
version sense: 6.0
version ROM 4.28.502.2
I would like to update my Android phone Marshmallow. I am a little lost on the forums.
Thank you for your help.
***Software status: Official ***
***RELOCKED ***
M8_UL PVT SUIP S-OFF
CI-11111111
HBOOT-3.19.0.0000
[email protected]
OpenDNP-v47.2.2-00564-M8974_FO.1024
OS-4.28.502.2
eMMC-boot 2048MB
info tel:
fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 3.19.0.0000
INFOversion-baseband: [email protected]
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 4.28.502.2
INFOversion-misc: PVT SHIP S-OFF
INFOserialno: SH43XXXXXXXX
INFOimei: 35XXXXXXXXXXXXX
INFOimei2: Not Support
INFOmeid: 00000000000000
INFOproduct: m8_ul
INFOplatform: hTCBmsm8974
INFOmodelid: 0P6B10000
INFOcidnum: 11111111
INFObattery-status: good
INFObattery-voltage: 0mV
INFOpartition-layout: Generic
INFOsecurity: off
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 7f8e91a3
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
-----------------------
Hombalala said:
Good evening,
I currently have an HTC one M8 under:
version Android: 5.0.2
version sense: 6.0
version ROM 4.28.502.2
Click to expand...
Click to collapse
Look in my Index thread under "RUU" and you will find a link for the Marshmallow RUU 6.20.502.5 as well as a note (in red font) on flashing the firmware.zip before installing the RUU.
So flash the firmware.zip in fastbootRUU mode, than install the RUU (with phone connected to PC). That is all you need to do.
Did you relock the bootloader to run an RUU, or was it already relocked when you got the phone?
redpoint73 said:
Look in my Index thread under "RUU" and you will find a link for the Marshmallow RUU 6.20.502.5 as well as a note (in red font) on flashing the firmware.zip before installing the RUU.
So flash the firmware.zip in fastbootRUU mode, than install the RUU (with phone connected to PC). That is all you need to do.
Did you relock the bootloader to run an RUU, or was it already relocked when you got the phone?
Click to expand...
Click to collapse
it already unlocked when you got the phone
Hombalala said:
it already unlocked when you got the phone
Click to expand...
Click to collapse
I think you mean to say: the phone was already bootloader relocked when I got the phone.
In any case, you can do as I stated in the previous post. Backup any personal data you want to keep, before you install the RUU. The RUU will wipe the phone.
redpoint73 said:
I think you mean to say: the phone was already bootloader relocked when I got the phone.
In any case, you can do as I stated in the previous post. Backup any personal data you want to keep, before you install the RUU. The RUU will wipe the phone.
Click to expand...
Click to collapse
So do i need my bootloader locked before trying to install MM Firmware then MM Ruu? I am on the same version as of Android 5.0.2, Software 4.28.502.1 and Sense 6.0 as Homblala up above. Mine HTC One M8 is an ATT Version
ELEVO said:
So do i need my bootloader locked before trying to install MM Firmware then MM Ruu?
Click to expand...
Click to collapse
Correct. Bootloader must be locked or relocked to flash firmware and/or RUU. Unlocked bootloader will not allow firmware/RUU to install. Exception is if you have s-off (which bypasses the requirement to relock the bootloader).
Unbricked )
redpoint73 said:
Correct. Bootloader must be locked or relocked to flash firmware and/or RUU. Unlocked bootloader will not allow firmware/RUU to install. Exception is if you have s-off (which bypasses the requirement to relock the bootloader).
Click to expand...
Click to collapse
Thanks for the help. I soft bricked my phone while trying to flash MM firmware so I can install Lineage 15.1 along with Gapps 8.1
All running well now, Thanks all for your help :good:
ELEVO said:
Thanks for the help. I soft bricked my phone while trying to flash MM firmware so I can install Lineage 15.1 along with Gapps 8.1
Click to expand...
Click to collapse
I know what you did. I just don't think you do.
Read my responses to your other threads/posts for a more detailed explanation. No boot after flashing firmware is completely normal and expected. I told you to flash firmware and RUU. You only did firmware.