Hi to all.
I have a big trouble.
I used the Fu**ing application LagFix (fstrim) (Play store Link: http://play.google.com/store/apps/de...y.lagfix&hl=it ),that before worked normally on my old Xperia S, on my Xperia Tablet S (SGPT121 wifi only,with last official firmware with root) and after 3-5 minutes that application start working tablet shut down.
Now led of charging doesn't work when I plug in the charger and Tablet doesn't start.
If I try to enter in recovery (Power button + Volume up) nothing appear except status led that give a white light for a second and nothing more.
After many try I also disconnected the battery but not good result received.
Pc Companion don't recognize tablet.
I also looked the unbrick metod with SD card,but ask to enter in recovery mode but is not possible for me cause tablet doesn't start,only white light give sign of life...
I must really say goodbye to my tablet? ( T_T)
Thanks.
Related
After using recovery and install a new kernel ( seems not compatible ) after choose reboot to system option my Xperia S didn't function anymore and I couldn't able to use keys to reset or power on my phone.
I try all of combination of keys but nothing
I put in charging more than 8 hour but nothing ( only first solid RED led appeared and after hours it goes off and when try to charge another time it did the same )
when I connect to PC the flashtool shows it connected with debugging off and do nothing.
I can't go on flash mode or fast mode to reinstall again.
would some one help me to how can I bring my phone in live. ( I haven't a repair sony service in my town )
Have you tried what I said?
skip0pot2mus said:
Have you tried what I said?
Click to expand...
Click to collapse
What did you said?
It's not bricked, one of my Xperia S phones did this to me on multiple occasions. The first time i just let it charge over night, or until the solid red LED turned to solid orange LED. The patience waiting for it to turn to an orange LED is the key here i noticed after it happening several times, interrupt it each time and it may as well be bricked through lack of patience.
Thread moved to Q & A section, kindly post in the relevant section next time.
3x vibe
Napolee said:
After using recovery and install a new kernel ( seems not compatible ) after choose reboot to system option my Xperia S didn't function anymore and I couldn't able to use keys to reset or power on my phone.
I try all of combination of keys but nothing
I put in charging more than 8 hour but nothing ( only first solid RED led appeared and after hours it goes off and when try to charge another time it did the same )
when I connect to PC the flashtool shows it connected with debugging off and do nothing.
I can't go on flash mode or fast mode to reinstall again.
would some one help me to how can I bring my phone in live. ( I haven't a repair sony service in my town )
Click to expand...
Click to collapse
had the same last night, hold the vol+ and vol - key pressed together, then press the power for about 20 secs you get a 3x vibe, then connect and flash
corum3 said:
had the same last night, hold the vol+ and vol - key pressed together, then press the power for about 20 secs you get a 3x vibe, then connect and flash
Click to expand...
Click to collapse
As I wrote I try all combination of keys but nothing changed...
Just when I plug to PC red LED goes on but after about an hour it goes off , and when I replug it goes on again...
Last days when I plug to wall charger red LED acts the same pluged to PC but now red LED is off about 8 hours connected to charger....
Only the flashtool recocnised the phone with usb debugging off when I connect to PC but I can't go to flash mode or fast boot mode...
Is there any commands with an application that works with xperia s and re write its bootloader when its not in flash or fastboot modes.
I was installed all of the derivers needed for adb and ... when my Xperia S was working...
would know someone help me to take my phone works agian?
Ohh man that's some pain in the ass!I don't know man you should try it again but explain me again you can only see red led light and nothing else???I had almost the same problen but luckily for me my usb debugging was checked.I don't know man google it just to got the usb debugging.If you could do that than this is the post for you....however if you don't... http://forum.xda-developers.com/showthread.php?p=31884091
Sent from my LT26i using xda premium
Hello
At first a big thumbs up for the great forums...following it since years. it´s great you people developed such a great community!
Well let´s come to my problem.....I guess i f***ed up my brand new tablet z
I was trying to install cyanogenmod on it and during that process i guess i made a crucial mistake.
As i already did it once on my old samsung galaxy plus i tried it again and i was doing great.
I´ll save you the details on how i tried to install cyanogen....
Lets get to the problem
Well i have a SGP312 (Wifi 32gb)
4.2.2 android
Built 10.3.1.c0.136
during flashing clockworkmod tablet broke down...
All i get now is a black display and a red led.
Tablet reacts when i press vol. up + power button but nothing happens.
Only the led turns off. lights up white then green, while connected to windows the pc informs that it detected some connected device but nothing appears.
fastboot commands not working it only says waiting for device...
Well i really do hope you guys do have a solution or any advice...
if you need more information just tell i post all you need
thank you
kosebi
kosebi said:
Hello
At first a big thumbs up for the great forums...following it since years. it´s great you people developed such a great community!
Well let´s come to my problem.....I guess i f***ed up my brand new tablet z
I was trying to install cyanogenmod on it and during that process i guess i made a crucial mistake.
As i already did it once on my old samsung galaxy plus i tried it again and i was doing great.
I´ll save you the details on how i tried to install cyanogen....
Lets get to the problem
Well i have a SGP312 (Wifi 32gb)
4.2.2 android
Built 10.3.1.c0.136
during flashing clockworkmod tablet broke down...
All i get now is a black display and a red led.
Tablet reacts when i press vol. up + power button but nothing happens.
Only the led turns off. lights up white then green, while connected to windows the pc informs that it detected some connected device but nothing appears.
fastboot commands not working it only says waiting for device...
Well i really do hope you guys do have a solution or any advice...
if you need more information just tell i post all you need
thank you
kosebi
Click to expand...
Click to collapse
just put it into flash mode and flash the stock sony ftf file on it
power off your tablet (in your case it is already done)
download and install the sony ericcson flash tool
download the ftf file for your tab z
hold the volume down button while connecting it to the computer
flash the ftf file
done
Hey,
I have a problem. My tablet is SGP312 has Cyanogenmod 11 (FXP247 - Android 4.4). It was bricked when I type in Terminal:
Code:
su
reboot recovery
Was turned off and will not turn on at all.
Power button = NOTHING
Power button + Vol(+) 3/10/25 secs = NOTHING
Power button + Vol(-) 3/10/25 secs = NOTHING
Power button + Voll(+) + USB = NOTHING
No LED light, It's literally a paperweight. I can't even put it into Flashmode.
Please help me!
Anyone can help me?
WeRunTheNite said:
Anyone can help me?
Click to expand...
Click to collapse
Are you sure u can't put it in to flash mode, because that's the first thing I would do
Try putting it into fast boot mode
Hold volume up button and keep holding it and connect it to the pc
If you see blue light on your tablet, it means it has successfully entered fast boot mode
Make sure all the drivers are installed
Or
Follow the following procedures
Install Sony Ericsson flash tool and install all the drivers
Hold volume down button and keep holding it and connect it to pc
Once you hear the connecting sound our Any notification on your pc saying that it is connected, go ahead and flash the ftf file
hassanman1997 said:
Are you sure u can't put it in to flash mode, because that's the first thing I would do
Try putting it into fast boot mode
Hold volume up button and keep holding it and connect it to the pc
If you see blue light on your tablet, it means it has successfully entered fast boot mode
Make sure all the drivers are installed
Or
Follow the following procedures
Install Sony Ericsson flash tool and install all the drivers
Hold volume down button and keep holding it and connect it to pc
Once you hear the connecting sound our Any notification on your pc saying that it is connected, go ahead and flash the ftf file
Click to expand...
Click to collapse
When I hold volume up or volume down and connect it to PC, light turn on in red color. Flashtool says "device connected with usb debugging off" but tablet is off!
Driver
WeRunTheNite said:
When I hold volume up or volume down and connect it to PC, light turn on in red color. Flashtool says "device connected with usb debugging off" but tablet is off!
Click to expand...
Click to collapse
in my opinion, the drivers are not correctly installed
http://developer.sonymobile.com/downloads/drivers/xperia-tablet-z-sgp311-sgp312-driver/
go to the website and download and load the drivers on your pc
its just weird that it says device connected with Usb debugging off when it is actually powered off
try charging your device, maybe the battery needs to be charged leave it there for atleast 30 mins then try the steps
let us know if you fixed it or not
hassanman1997 said:
in my opinion, the drivers are not correctly installed
http://developer.sonymobile.com/downloads/drivers/xperia-tablet-z-sgp311-sgp312-driver/
go to the website and download and load the drivers on your pc
its just weird that it says device connected with Usb debugging off when it is actually powered off
try charging your device, maybe the battery needs to be charged leave it there for atleast 30 mins then try the steps
let us know if you fixed it or not
Click to expand...
Click to collapse
I have a similar problem, I've flashed plenty of devices before, never briked a thing.
By unloking the bootloader the data partition of my brand new tablet Z went corrupted. I've tried to flash several firmware but none was succesfull (couldn't format data...), and finally it get totally bricked! no light, nothing... I was not even able to put it in flash mode (no light ever!).
I've tried after a while, I've read with some other Xperia devices, it would be possible to recover it after some time, by letting the battery die, then use some rubber trick to keep vol- pressed... you can find it in XDA forums what I'm talking about. However after a month my tablet was still dead. no light, no nothing!
I've sent it to warranty and the just said that "an alternative firmware was flashed" (voiding the warranty) "and has rendered the logic board unusable".... and they have to order a new unit!!
I feel so surprise that even the cheapest chinese tablet have an harware mode that allow to reflash and resuscitate it back to factory... even if the firmware is completely screwed, and a 600$ tablet for a simple bootloader unlock got totaly bricked.
I wonder if there is an "hardware" way to recover the tablet (I saw it's pretty easy to tear down the Xperia tablet Z), by directly accessing the NAND... or by accessing some PIN (well I know sony would have not leaked such information)
Hello to all!
I had my Xperia P hard bricked during CMW installation and I am trying hard to fix it by myself, because I believe I lost the warranty because of it ...
So I ask: is there anyone who can help me with a possible JIG Xperia P?
or any other option to reinstall android on my phone, because he is really dead! no recognition usb, no hard boot, no battery charging, no flashing lights....
nothing seems to work!!! ...
can anyone help me please?
Thank you in advance!
Alex
Alex Rocha said:
Hello to all!
I had my Xperia P hard bricked during CMW installation and I am trying hard to fix it by myself, because I believe I lost the warranty because of it ...
So I ask: is there anyone who can help me with a possible JIG Xperia P?
or any other option to reinstall android on my phone, because he is really dead! no recognition usb, no hard boot, no battery charging, no flashing lights....
nothing seems to work!!! ...
can anyone help me please?
Thank you in advance!
Alex
Click to expand...
Click to collapse
Bit more detail how you bricked it installing CWM. What exactly you done and where you get it from.
Try to shut it down, press power + volume up untill you feel (1+) 3 vibrations.
See if you can connect it in flash mode (connect usb to pc while you hold volue down), the led should turn green.
Xperia P hard bricked
ChikeD said:
Bit more detail how you bricked it installing CWM. What exactly you done and where you get it from.
Try to shut it down, press power + volume up untill you feel (1+) 3 vibrations.
See if you can connect it in flash mode (connect usb to pc while you hold volue down), the led should turn green.
Click to expand...
Click to collapse
First I'd like to thank's for your help ChikeD!
Well.... I was trying to install the new CM 11 Nightly Build - a custom ROM build on Android 4.4.2 KitKat- on my Sony Xperia P device
I had rooted succesfully and was seaching for an app on google play store to provide access to "recovery mode" that works with my LT 22i to finish the installation of this new rom... i tryed lot of apps, but no one worked... and so I've found this app "Recover X" from LEDelete developer.
after install and run, this app show me one option to get access to recovery mode... i dont remember exactly, but i saw somethig like "CMW......" on screen. after download, I tryed to reboot my phone and then its completly dead!! i'd tryed any kind of possibility pressing buttons dowloading softwares and more but my computers didn't recongize it when connect USB cable...
vol+ / power dont work, vol- / usb dont work, no charging indicator, no lights blinks, nothing works! it looks like a motherboard without any operational system...
And I saw in some websites that exist one JIG for Samsung devices that alows recovery phones with problems like mine... so i wonder if is possible to find some JIG for Xperia P or any other possibility of reinstallation of android system
I hope i made myself clear because I'm still learning this language... that means I'm sorry for my bad english in advice...
If there is anything that you can't understand, please let me know
Thank's a lot!
Alex
If you had asked before I would have told you Recovery X won't work, didn't work the 2 times I have tried it, but didn't brick my phone eithr.
To incatal CM you didn't neet to root or install CWM since you need to flash it's kernel anyway.
Is your bootloader unlocked?
Was the phone fully charged when it happened, did it start boot and then died or just went black?
Have you tried to hold the power + volume up for 10-15 minutes?
To reinstall firmware you need flash mode (volume down while connecting to USB), have you flashed with flashtool or PC Companion before?
ChikeD said:
If you had asked before I would have told you Recovery X won't work, didn't work the 2 times I have tried it, but didn't brick my phone eithr.
To incatal CM you didn't neet to root or install CWM since you need to flash it's kernel anyway.
Is your bootloader unlocked?
Was the phone fully charged when it happened, did it start boot and then died or just went black?
Have you tried to hold the power + volume up for 10-15 minutes?
To reinstall firmware you need flash mode (volume down while connecting to USB), have you flashed with flashtool or PC Companion before?
Click to expand...
Click to collapse
Yes i had reinstalled twice by flash tool and pc companion, holding vol down while connecting to USB, because the device was with very low performance.
When i was trying to get rebooted on "recovery mode" before the black screen, my battery was on 85%....
Yesterday i tried to do "hard reboot" holding the power + volume up for 50 minutes and nothing....
Actually what i really need is find a way to get some response of the system of this phone (by connecting in some jig, or doing something with the software or even the hardware...), because if my computer recognize the phone, i do believe that i'll can handle with reinstallation... in other words, my challenge now it's only get out from the black screen for any other operational response
One of my ideas is unmount rear cover and try to disconnect the battery cord for 10 minutes and see if something changes... but i'm fully opened to new ideas
I really believe that i'll succeed on this case with yours precious help!!
Thank you again for your assistance!
Alex
Alex Rocha said:
One of my ideas is unmount rear cover and try to disconnect the battery cord for 10 minutes and see if something changes... but i'm fully opened to new ideas
I really believe that i'll succeed on this case with yours precious help!!
Thank you again for your assistance!
Alex
Click to expand...
Click to collapse
It might, worked for this guy http://forum.xda-developers.com/showthread.php?t=2628715&page=2
ChikeD said:
It might, worked for this guy http://forum.xda-developers.com/showthread.php?t=2628715&page=2
Click to expand...
Click to collapse
Well... unfortunately remove the power cord did not worked... no changes! i confess that i was betting on this procedure... but ok! Let's keep searching for a new option!
Best regards!
Alex
hi guys, as i stated in my title, when i charge it keep blinking red led(whenever i charge), won't connect to the pc, and i've charged it for at least 4 hours i have tried evry thing( power+ vol up) and hard reset at sd slot but nothing can change it now
it may got in some water(but not that many times, only rain, etc) and it keep restarting, and wont comeback to life, i can use for a few minutes, and at that time, i cant seem to charge my phone, and when i hard reset (power+up) it keep restarting until this point, and guys, i bring it to xperia care but they seems tobe helpless, i hope you understand what im saying, btw english is my 2nd language
Can you get to FastBoot Mode (With the phone off, plug it into the PC's USB port and immediately press & hold the UP volume key, the LED should go from Red to solid Blue.) If yes, Run Flashtool (installing it first, if necessary) and try to get to Flashmode (With the phone off, plug it into the PC's USB port and immediately press & hold the DOWN volume key, the LED should go from Red to off, but Flashtool will tell you that the phone is connected in FlashMode)
Have you flashed anything? The usual cause for the red flashing LED is by flashing a ROM or Kernel when you haven't unlocked the bootloader first.
OK, there are some ROMs and kernels which can be flashed on a locked bootloader.
Download an FTF for your phone from the FTF repository thread, and flash it using Flashtool.
Tunki said:
hi guys, as i stated in my title, when i charge it keep blinking red led(whenever i charge), won't connect to the pc, and i've charged it for at least 4 hours i have tried evry thing( power+ vol up) and hard reset at sd slot but nothing can change it now
it may got in some water(but not that many times, only rain, etc) and it keep restarting, and wont comeback to life, i can use for a few minutes, and at that time, i cant seem to charge my phone, and when i hard reset (power+up) it keep restarting until this point, and guys, i bring it to xperia care but they seems tobe helpless, i hope you understand what im saying, btw english is my 2nd language
Click to expand...
Click to collapse
Before flashing, have you tried charging the phone through your computer's USB? See if that works.