Alright, so i've searched and searched but i can only seem to find my problems separately. It started with the replacement of my new screen. i got it off Amazon and worked fine at first. but then i began to notice that once i locked my phone, the touchscreen would deem unresponsive( a battery pull would temporarily fix the issue) . i tried to fix the issue by going into the hidden menu to hopefully re calibrate my screen but once i tapped device test, i got stuck in the miniOS 3.1 and the worst part is that my touch screen wont respond( even after battery pull). so i cannot physically touch "OK" to begin the "Auto Touch Test"
Does it give you factory reset status 2???
no, i cant go any further from the device test
Do you see power off or restart button if yes press and hold power button while holding tap the power off or restart on the screen.
my touchscreen is unresponsive. i cant tap anything. is there any button combination or a computer program that can help?
aukhan said:
Does it give you factory reset status 2???
Click to expand...
Click to collapse
I'm stuck at Factory Reset Status 2. Can you help me? I tried pulling the batter and all it does it reboot to recovery. It wont go any further.
---------- Post added at 07:02 PM ---------- Previous post was at 06:22 PM ----------
you need to follow all the steps in both links.
http://lgg3root.com/lg-g3-root/how-to-unrootunbrick-lg-g3/
http://www.reddit.com/r/LGG3/comments/2obqre/please_help_phone_stuck_in_factory_reset_status_2/
shaun0207 said:
I'm stuck at Factory Reset Status 2. Can you help me? I tried pulling the batter and all it does it reboot to recovery. It wont go any further.
---------- Post added at 07:02 PM ---------- Previous post was at 06:22 PM ----------
you need to follow all the steps in both links.
http://lgg3root.com/lg-g3-root/how-to-unrootunbrick-lg-g3/
http://www.reddit.com/r/LGG3/comments/2obqre/please_help_phone_stuck_in_factory_reset_status_2/
Click to expand...
Click to collapse
check your PM I can surely hlpe you
Hold the power button then click on your option (Power button+Your option) Then comfirm and move on
Hey, does anyone know if there was a fix to this problem? I'm having the exact same issue and Power + tapping Normal Boot doesn't work since my touch screen is having problems. I'll still be looking around in the meantime, thanks!
Plug in your computer and pray for fastboot commands or adb, examples:
adb devices (run in thermial)
adb reboot recovery
Or
fastboot devices
fastboot reboot
Then hardware keys to custom recovery
If all else fails call customer service and try to get a replacement. There is no way (that I know of) for the device to look "flagged'. Pretty much we don't get any red bootloader text.
1619415 said:
Plug in your computer and pray for fastboot commands or adb, examples:
adb devices (run in thermial)
adb reboot recovery
Or
fastboot devices
fastboot reboot
Then hardware keys to custome recovery
If all out fails call custumer service and try to get a replacement
Click to expand...
Click to collapse
I am not aware of these commands or adb you speak of. could you please elaborate because i was looking for something like this
Related
Long story short.
My phone rebooted when i plugged in my wallcharger (dunno if it has anything with that though), and shows the samsung bootlogo. But after that the screen goes black and nothing happends. Turns itself off again..
I was on MIUI 1.11.4 and KI4 Modem at the time. with latest CWM.
Couldnt get in recoverymode. downloadmode on the other hand is no problem.
So i then tried then to flash different stock roms with odin. still no go. Black screen..
So, anyone?
edit:
I've now got CWR working again. Tried to mount sdcard to pc but no go on this either. Will try to flash villain 1.1.. And if that doesn't work the next step will me repartitioning? :s booo
I have the exact same thing happen to me today!
The phone stops at the big flashing "S" boot screen. I waited a long time and it doesn't get anywhere. however, I then noticed, by tapping the the power button to put the phone to sleep, and then tapping the home button will bring me to the screen lock.
I can unlock the screen. But the phone home screen is black and the all shortcut keys including the four original shortcut keys at the bottom of the screen aren't there!! The only thing I can do are:
1. the dropdown from the notification bar. Everything from the dropdown work.
2. double tapping the home button will bring up the Voice Command
3. long press the home button will bring up task manager, and everything in that particular task manager page is functional.
4. volume keys are functional
5. power button is functional
That's all I can do to the phone.
Both the menu button and the return button are not working.
Can someone please help! Please advise what shall I do.
Thanks.
Remove the sd card, that should fix it.
If you can get to recovery might be a good idea to wipe everything and re-install from scratch.Wipe cache partion,dalvik cache,battery stats,format data,format system,factory reset and then reboot.Phone wont pass S2 logo so give it 2min,pull the battey,put it back in and boot to download and re-install your ROM (firmware first if you want aswell) then apps if you have a back up via titanium.
Freakgs said:
Remove the sd card, that should fix it.
Click to expand...
Click to collapse
tried it. doesn't work.
My last resort would be to wipe everything but I wish I don't have to go to that.
---------- Post added at 08:04 PM ---------- Previous post was at 07:53 PM ----------
Read from another thread, someone is having identical problem: stuck at the S2 logo boot screen.
He tried flashing several ROMs but without any luck: still stuck at S2 logo boot screen. No solution yet.
My condition might be slightly better as I manage to get to the home screen, only I can't launch any program since the screen is blank, and the MENU button doesn't bring up any menu as before.
Any other ideas? Please?
Thanks again.
wajaam said:
tried it. doesn't work.
My last resort would be to wipe everything but I wish I don't have to go to that.
---------- Post added at 08:04 PM ---------- Previous post was at 07:53 PM ----------
Read from another thread, someone is having identical problem: stuck at the S2 logo boot screen.
He tried flashing several ROMs but without any luck: still stuck at S2 logo boot screen. No solution yet.
My condition might be slightly better as I manage to get to the home screen, only I can't launch any program since the screen is blank, and the MENU button doesn't bring up any menu as before.
Any other ideas? Please?
Thanks again.
Click to expand...
Click to collapse
Hey!
I got my problems sorted out after 4 hours of trying (and failing). Im not sure how to fix yours though but this is how i did it..
Eventually got the "Mount usb to pc"-function working in CWR (No luck with this function in win7, but worked as a charm 1. try in ubuntu). Transfered an old NANbackup i had and flashed that. No problems what so ever! Really odd since I tried to flash the exact same ROM from odin with no luck..Hope this may help you or others. good luck!
Hi there,
I wanted to install a custom ROM (Moonstone V1.1) on my Alcatel OT-990, so I followed the guides mentioned here to root and update my phone to be able to install custom ROMs. Everything went fine, so I proceeded to install the custom ROM. While installing I forgot to flash the custom ROM... and now I am caught in a boot loop.
I followed various guides mentioning all kinds of stuff to unbrick the phone posted here and on some other sites (some site mentioned formatting my SD card, tried that, nothing happened aswell).
I'd really be glad if someone would help me out.
take the battery out for a few seconds, press the down volume, home key and power, when the icon lights come on let go of the power key but continue to hold the volume and home key until the droid icon the let go of both, the plug the usb cable in to the top with the other end connected to computer and click start menu on computer and go to the recovery-clockwork-file that you should have installed, open the zip and run the "install.bat" you should be able to just double click on it , it will open up the "clockworkmod", just go into install from zip and flash the rom.. if you don't have the recovery-clockwork downloaded let me know and i'll get you the site to download it..... hope this helps....
---------- Post added at 08:53 PM ---------- Previous post was at 08:45 PM ----------
alot of phone are different so if you phone don't respond: plan B - hold volume up and press power, when phone vibrates, let go of power and press home key but don't let go of volume, phone should go into clockworkmod, if not then attach usb cord and follow the above direction from there.... good luck, its hard to brick the 990 without formatting everything and completely wiping all the files from sd and phone... and don't forget to wipe cache and dalvik and battery stats this helps... those can be found under advanced
ot-990.blogspot.com/2012/03/how-to-install-clockworkmod-recovery.html
dave39 said:
take the battery out for a few seconds, press the down volume, home key and power, when the icon lights come on let go of the power key but continue to hold the volume and home key until the droid icon the let go of both, the plug the usb cable in to the top with the other end connected to computer and click start menu on computer and go to the recovery-clockwork-file that you should have installed, open the zip and run the "install.bat" you should be able to just double click on it , it will open up the "clockworkmod", just go into install from zip and flash the rom.. if you don't have the recovery-clockwork downloaded let me know and i'll get you the site to download it..... hope this helps....
---------- Post added at 08:53 PM ---------- Previous post was at 08:45 PM ----------
alot of phone are different so if you phone don't respond: plan B - hold volume up and press power, when phone vibrates, let go of power and press home key but don't let go of volume, phone should go into clockworkmod, if not then attach usb cord and follow the above direction from there.... good luck, its hard to brick the 990 without formatting everything and completely wiping all the files from sd and phone... and don't forget to wipe cache and dalvik and battery stats this helps... those can be found under advanced
ot-990.blogspot.com/2012/03/how-to-install-clockworkmod-recovery.html
Click to expand...
Click to collapse
Thanks a lot, it's working now.
hey guys i have the same problems but worse because i brick my phone by wiping all data because i was flash custom rom marina but didn't work and now it's on a boot loop and i did like you said but didn't work so could please help me
Having the same problem dont know how to fix it :[
Once you stuck in boot loop, can you flash stock rom via fastboot?
Hi,
A few days ago, I tried to flash the androwook prime rom, but didn't succeed.
My prime is now stuck on the ASUS bootlogo, I can access to fastboot : http://imgur.com/xO2Jw
I found this thread, I did all the steps but when I try too boot into recovery it gets stuck like this http://imgur.com/fxj2C
Do you have any solution ?
Please anayone ?
This is driving me crazy ...
0h_no said:
Hi,
A few days ago, I tried to flash the androwook prime rom, but didn't succeed.
My prime is now stuck on the ASUS bootlogo, I can access to fastboot : http://imgur.com/xO2Jw
I found this thread, I did all the steps but when I try too boot into recovery it gets stuck like this http://imgur.com/fxj2C
Do you have any solution ?
Click to expand...
Click to collapse
The first thing you need to do is enable NVFlash http://forum.xda-developers.com/showthread.php?t=1774352
Once you do that you can continue tinkering with the device
The screen you linked to is the bootloader screen not the recovery screen. to enter the recovery you have to press vol down, on the RCK icon. If you loaded the recovery successfully it should load, if not you need to try to install it again because something did not work correctly.
Word of caution recoveries do not work yet with JellyBean so if you load a JB rom, do not try to load a recovery, this is what almost bricked my device, but thanks to NVFlash i was saved.
Good Luck and Happy Modding!
imadork8317 said:
The first thing you need to do is enable NVFlash http://forum.xda-developers.com/showthread.php?t=1774352
Once you do that you can continue tinkering with the device
The screen you linked to is the bootloader screen not the recovery screen. to enter the recovery you have to press vol down, on the RCK icon. If you loaded the recovery successfully it should load, if not you need to try to install it again because something did not work correctly.
Word of caution recoveries do not work yet with JellyBean so if you load a JB rom, do not try to load a recovery, this is what almost bricked my device, but thanks to NVFlash i was saved.
Good Luck and Happy Modding!
Click to expand...
Click to collapse
I think he already has nvflash or he wouldn't have the rck icon.
to enter recovery he uses volume up on the icon not volume down. volume down selects it.
recoveries work fine as long as you are restoring a jb rom and using twrp.
flumpster said:
I think he already has nvflash or he wouldn't have the rck icon.
to enter recovery he uses volume up on the icon not volume down. volume down selects it.
recoveries work fine as long as you are restoring a jb rom and using twrp.
Click to expand...
Click to collapse
I don't have NVFlash, stock device a week old and I have the RCK icon when I hold Vol Down and power on.
I never used NVFlash.
I have the recovery icon but when I select it (as on the picture), there is a text saying "Booting recovery kernel image" and then nothing else happends.
Since i could not turn off the device, i let it run out of battery yesterday. So i recharged it, and now I can't access fastboot anymore, when I do power + vol down I end up on the asus boot logo...
hx4700 Killer said:
I don't have NVFlash, stock device a week old and I have the RCK icon when I hold Vol Down and power on.
Click to expand...
Click to collapse
hmm, I installed nvflash and got that icon straight after so presumed it had come from that as I never had it before.
---------- Post added at 08:33 PM ---------- Previous post was at 08:33 PM ----------
0h_no said:
I never used NVFlash.
I have the recovery icon but when I select it (as on the picture), there is a text saying "Booting recovery kernel image" and then nothing else happends.
Since i could not turn off the device, i let it run out of battery yesterday. So i recharged it, and now I can't access fastboot anymore, when I do power + vol down I end up on the asus boot logo...
Click to expand...
Click to collapse
If you had held the power off button for 10 seconds the device should have restarted.
flumpster said:
hmm, I installed nvflash and got that icon straight after so presumed it had come from that as I never had it before.
---------- Post added at 08:33 PM ---------- Previous post was at 08:33 PM ----------
If you had held the power off button for 10 seconds the device should have restarted.
Click to expand...
Click to collapse
The problem is that I could not turn it off, so it normaly went out of battery.
Today I wanted to try NVFlash so I recharged my prime, and when I wanted to boot it and put it in fastboot mode I couldnt get to the selection screen (with RKV, Android, Fastboot, Wipe). It just boots on the asus boot logo.
0h_no said:
The problem is that I could not turn it off, so it normaly went out of battery.
Today I wanted to try NVFlash so I recharged my prime, and when I wanted to boot it and put it in fastboot mode, and now I cant get to the selection screen (with RKV, Android, Fastboot, Wipe). It just boots on the asus boot logo.
Click to expand...
Click to collapse
A lot of people are having the same problem as you and without nvflash I have not seen anyone come up with a solution yet. The moment I see one I will post back.
Thanks a lot for your time !
I there is any changes on my side i'll let you know.
People have the same problem as you here.
http://forum.xda-developers.com/showthread.php?t=1910405&page=2
I own many nexus devices, a heavy terminal user and I know about things like adb, fastboot etc.
This device Huawei mediapad 7 lite is driving me mad, I wanted to install CM 10.1 on it but I am unable to enter into fastboot mode. I have searched enough and tried all the methods like "adb reboot bootloader" and "volume up + power", but no luck at all.
Is there anything that I am missing? I am able to use 'adb' but rebooting into bootloader just power offs the device and sometimes just displays the battery charging icon on screen.
If I try "adb reboot recovery", it enters into recovery mode but within 2 seconds reboots. I somehow need to get into bootloader mode(fastboot mode) so that I can flash recovery and custom rom.
Your help is highly appreciated!
Thanks in advance
smartdipu said:
I own many nexus devices, a heavy terminal user and I know about things like adb, fastboot etc.
This device Huawei mediapad 7 lite is driving me mad, I wanted to install CM 10.1 on it but I am unable to enter into fastboot mode. I have searched enough and tried all the methods like "adb reboot bootloader" and "volume up + power", but no luck at all.
Is there anything that I am missing? I am able to use 'adb' but rebooting into bootloader just power offs the device and sometimes just displays the battery charging icon on screen.
If I try "adb reboot recovery", it enters into recovery mode but within 2 seconds reboots. I somehow need to get into bootloader mode(fastboot mode) so that I can flash recovery and custom rom.
Your help is highly appreciated!
Thanks in advance
Click to expand...
Click to collapse
Hi,
I am having similar problem for different reasons. I am in a reboot loop and if I try power+volume up I get this: Enter into fastboot mode. You can press POWER key for more than 10 seconds to reboot device.
Power for 10 seconds will reboot and go back to reboot loop, but anything else I try to push does not get me anywhere. In this state the tablet will not show through USB on the computer. I was trying to google how to enter bootloader, but I am not able to find any info plus screenshots. So if you find a solution, I would VERY happy.
I would keep you informed if I find something myself. Here is my post: http://forum.xda-developers.com/showthread.php?p=37646468#post37646468
Good luck.
Karel
kolibrik said:
Hi,
I am having similar problem for different reasons. I am in a reboot loop and if I try power+volume up I get this: Enter into fastboot mode. You can press POWER key for more than 10 seconds to reboot device.
Power for 10 seconds will reboot and go back to reboot loop, but anything else I try to push does not get me anywhere. In this state the tablet will not show through USB on the computer. I was trying to google how to enter bootloader, but I am not able to find any info plus screenshots. So if you find a solution, I would VERY happy.
I would keep you informed if I find something myself. Here is my post: http://forum.xda-developers.com/showthread.php?p=37646468#post37646468
Good luck.
Karel
Click to expand...
Click to collapse
Then you see on your tablet: Enter into fastboot mode. You can press POWER key for more than 10 seconds to reboot device. - then it means that you are already in fastboot mode. Holding power for 10 s needed to exit from fastboot (to reboot).
after_silence said:
Then you see on your tablet: Enter into fastboot mode. You can press POWER key for more than 10 seconds to reboot device. - then it means that you are already in fastboot mode. Holding power for 10 s needed to exit from fastboot (to reboot).
Click to expand...
Click to collapse
Thanks for the reply. Sorry if I sound like a novice, but what can I fo in fastboot mode? The computer does not recognize the device in this fastboot, so I can do anything from computer, and the tablet does not respond to anything pressed while in this mode.So how do I install recovery or do anything sensible? Sorry if I missed something obvious, it is my first Mediapad.
kolibrik said:
Thanks for the reply. Sorry if I sound like a novice, but what can I fo in fastboot mode? The computer does not recognize the device in this fastboot, so I can do anything from computer, and the tablet does not respond to anything pressed while in this mode.So how do I install recovery or do anything sensible? Sorry if I missed something obvious, it is my first Mediapad.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=37665946&postcount=51
All operations with fastboot should be performed via terminal.
Hello after_silence, any help for me? When I do "adb reboot bootloader", it shuts down and NOTHING comes up on screen. If usb cable is connected, it shows the battery charging symbol. When I do "sudo fastboot devices", nothing comes up. That means I am not entering into fastboot mode. Any other workaround?
Thanks!
Help
smartdipu said:
I own many nexus devices, a heavy terminal user and I know about things like adb, fastboot etc.
This device Huawei mediapad 7 lite is driving me mad, I wanted to install CM 10.1 on it but I am unable to enter into fastboot mode. I have searched enough and tried all the methods like "adb reboot bootloader" and "volume up + power", but no luck at all.
Is there anything that I am missing? I am able to use 'adb' but rebooting into bootloader just power offs the device and sometimes just displays the battery charging icon on screen.
If I try "adb reboot recovery", it enters into recovery mode but within 2 seconds reboots. I somehow need to get into bootloader mode(fastboot mode) so that I can flash recovery and custom rom.
Your help is highly appreciated!
Thanks in advance
Click to expand...
Click to collapse
Is There Any Solution To This? I've Been At It All night and No results
STUCK
JaleelAJames said:
Is There Any Solution To This? I've Been At It All night and No results
Click to expand...
Click to collapse
Been up tonight on The Evervolv screen, rebooted, still Evervolv screen
Sounds similar to your problem, cannot get any PC link, power and volume controls gets me to fastboot but the PC does not see the device
Retry, Retry, EvervvolLLLLL screen, nothing else
Any suggestions or tips
thxs
---------- Post added at 05:29 AM ---------- Previous post was at 05:15 AM ----------
hillbillie said:
Been up tonight on The Evervolv screen, rebooted, still Evervolv screen
Sounds similar to your problem, cannot get any PC link, power and volume controls gets me to fastboot but the PC does not see the device
Retry, Retry, EvervvolLLLLL screen, nothing else
Any suggestions or tips
thxs
Click to expand...
Click to collapse
Managed to pull back TWRP screen, wiped Dalvik, cannot mount external_sd, now waiting on "rm - rf on external_sd"
I would like to get on the developer board, to ask directly, how I could fix this.
regards
Phew!
hillbillie said:
Been up tonight on The Evervolv screen, rebooted, still Evervolv screen
Sounds similar to your problem, cannot get any PC link, power and volume controls gets me to fastboot but the PC does not see the device
Retry, Retry, EvervvolLLLLL screen, nothing else
Any suggestions or tips
thxs
---------- Post added at 05:29 AM ---------- Previous post was at 05:15 AM ----------
Managed to pull back TWRP screen, wiped Dalvik, cannot mount external_sd, now waiting on "rm - rf on external_sd"
I would like to get on the developer board, to ask directly, how I could fix this.
regards
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=25468368&postcount=5&nocache=1&z=8663575234822929
Sorry for the simple posting, but the above thread fixed the problem.
The original failure was caused by missing the factory reset after flashing, before unzipping.
Wow , XDA saved the tab for xmas, although the 2 steps flash cust and flash tombstones didn´t
work, it rebooted to an older version just fine!
Then restored backup, I´ll try again after xmas.
Happy Xmas !!
Hello Guys,
i hope everything is alright. without wasting any of your precious time, lemie hust get straight to the point. i have a chinese smartphone which hapenns to be CityCall i930, i rooted it and everything was working perfectly untill i saw a thread here in xda about changing the interface of patter lock. after trying that, my phone when turned on, just displays the words CITYCALL then it turns blank. there, you have to take out battery and replace it again so that it can turn on again. i tried too enter recovery mode 3e and do factory reset.wipe cache but still i havent been successful. please guys, help me to repair my phone i dont know what to do anymore please!
eyemdonc said:
Hello Guys,
i hope everything is alright. without wasting any of your precious time, lemie hust get straight to the point. i have a chinese smartphone which hapenns to be CityCall i930, i rooted it and everything was working perfectly untill i saw a thread here in xda about changing the interface of patter lock. after trying that, my phone when turned on, just displays the words CITYCALL then it turns blank. there, you have to take out battery and replace it again so that it can turn on again. i tried too enter recovery mode 3e and do factory reset.wipe cache but still i havent been successful. please guys, help me to repair my phone i dont know what to do anymore please!
Click to expand...
Click to collapse
Try do a hard reset but holding the left "soft" key when powering up the phone.
---------- Post added at 09:34 AM ---------- Previous post was at 09:30 AM ----------
Not sure if this will work but try a master reset as well.
To do a master reset do this:
1) Turn phone off
2) Hold the two soft keys and power back on
3) As oon as it states 'hit ok', hit ok and then allow the phone to run through the reset...
Skatie said:
Try do a hard reset but holding the left "soft" key when powering up the phone.
---------- Post added at 09:34 AM ---------- Previous post was at 09:30 AM ----------
Not sure if this will work but try a master reset as well.
To do a master reset do this:
1) Turn phone off
2) Hold the two soft keys and power back on
3) As oon as it states 'hit ok', hit ok and then allow the phone to run through the reset...
Click to expand...
Click to collapse
thanks mate, let me try this. but sorry,are the soft keys volume up n down?