Dictionary for n00b - What is.../What does ...mean?
Start read from 1st to last one and don't jump from one to another. If you will read all, it bring complex knowladge, if not you can be confused
Read summary to make sure, that you know everything if you think that some part(s) is not necessary to read for you!
If you post link here, please link to 1st post! Than everybody can know, what he/she can find here
Atin001 helps with some updates/corrections in Dictionary - take a minute to thanks him also.
Did you miss something here? Send me PM what you want to have here!
Basics of Unix-like system (ROOT)
su, root, rooting, superuser app - what is it, why we need it
sh, bash, user/root shell - what is bash, sh; what is user shell; what is root shell; how I can recognise it each other
Bussybox - what BusyBox is, basic list of commands from BusyBox
(in progress) Kernel - what is going on? Do I need it?
Android platform and it's specifics
adb shell - what is it, for what it is
Android SDK - what is it, tool which provides, where to download
Tools for work with Android adb shell - Terminal Emulator, ADB shell from Android SDK and how to use it
Custom recovery
What custom recovery is - what custom recovery is
Tools which custom recovery provides - list of tools with description which custom recovery bringing
ADB as root user
USB-MS Toggle
Backup/Restore
Flash ZIP from sdcard
Wipe menu
Partition sdcard + etx2, ext3, ext4 filesystem description
Mounts
Others
Is it save to install? - possible problems, why should I try it?, backup/restore of original recovery
How this whole thing works - Drellisdee's installation steps description/elaboration
Custom ROMs (generally)
What custom ROM is?
Is save install custom ROM? - potencional problems
What I need for install?
What can custom ROM brings - kernel, update, performance, customization, theme, ....
what is ...
deodexed, zipaglined, png-optimized
JIT, HW:acceleration, VM.Heap Size, stagefright
apps2sd + dalvik2sd
custom kernel (recompiled, ...)
Android versions (collecting informations)
List of versions of Android for Optimus One (official&unofficial) - what we can install into our device
What version can be rooted and how? - version list, how to root, which version can be rooted, which can't
Sources (collecting)
http://en.wikipedia.org/wiki/Android_version_history
Tools which you must have
Android SDK Tools (adb shell)
Terminal emulator
KDZ Updater tool
...
So I'm on way, where I can start doing advanced stuff?
Follow Noejn's sign-post You can find here main point for start.
If you now know basic "words of android world" you can take a look on really great tutorial how to root, install recovery and so on.
Have you some questions? Make sure that you look on Mihir287's FAQ
1. Basics of Unix-like system
su, root, rooting - what is it, why we need it
sh, bash, busybox - what BusyBox is, basic list of commands from BusyBox, bash, sh
Kernel - What is it?
su
Also referred as substitute user - is command for changing of the account in current terminal (usually black screen with blinking cursor). Default account is root account. So if you insert into terminal 'su' and hit enter, you will become root user.
root
Root alias superuser or poweruser is special user account for system administration. Similar to windows having its administrator account, unix-like system have system have the root. With this user you can do anything and if you will run command for delete whole system, unix will just do it! No asking, no confirming. So, watch your steps!
rooting
Rooting is just enabling power of root for applications or our proposes. You can read great article about Rooting on androidpolice. Kepp on your mind, that some steps described on this page are NOT compatible with our Optimus One!!
Superuser app
After rooting is done, you will see new app called superuser in app drawer. This app can delegate applications to use su (root) feature. When app ask for first use, popup window will appear asking if the application should be allowed to use root permission.
sh, bash
is a command-line interpreter or shell that provides a traditional user interface for the Unix operating system and for Unix-like systems. So simply, it is some interface, which can execute command(s), which you have entered. Many shells exist, but in scope of android you can (as far as I know) use only sh (standard - Bourne-shell) or bash (compiled in BusyBox or separately on XDA). Both are basically same, but bash has much more future and it is comfortable. It's too big to describe here, so if you are interested in learning more, follow links in sources section.
user/root shell
How do I know if I'm root or normal user? It's simple. Root's shell is ended with # (usually it's shell looks like "bash-3.2# _") and user's ends with $ (usually bash-3.2$ _). In terminal emulator you also can have only [path]($|#) (for root for example "/etc # _")
BusyBox
also called "The Swiss Army Knife of Embedded Linux" is a tool which brings into Android basic tools known from unix system, but is much more smaller than standard tools is. But this "packing" brings also limits in possibilities in comparison to standard tools in unix-system (missing special modes of tool, color output and so on). Many application use this. For example busybox grep (filtering of text) is needed for application called Market enabler.
BusyBox commands
list of commands is really wide, so it's not possible explain all, so I pickup only top few. (hint: if you want what some command do, just search on google for "man <command_name>" for example man mv or enter command here
cd - cange directory - same like in windows. You can switch directory. example: cd /sdcard
ls - list of files in actual directory (have few switches like for example: ls -l /sdcard/*.png (detailed listing)
cat - print file into standart output (like more in windows) Example: cat /sdcard/data.txt
vi - editing of file. But on limited phone keyboard (no keyboard) it is little harder Read more about vi
cp - copy of one or more file. Example: cp /sdcard/bike.jpg /sdcard/media/bike-wallpaper.jpg
mv - moving/rename files, Example: mv /sdcard/bike.jpg /sdcard/media/renamed-moved-bike.jpg
rm - delete file (rm -R for recursive, or for delete whole folder), Example: rm -R /sdcard/wallpaper-bad/*
find - search for files, Example find / -name "best-chopper-ever.avi"
mkdir - make directory - creates directory, Example: mkdir mynewdir
chmod - changes access of files
less - similar like cat, but you can scroll in it and it doesn't produce any output. Example: less /sdcard/funnytext.txt
Please, take due note that man pages are documentation of unix tools. For BusyBox's tool help, just enter BusyBox <command_name> -h.
Many time, when is BusyBox installed, are also symbolic links created. It means, that is not necessary do BusyBox <command>, but only <command> will be enough.
Kernel
http://en.wikipedia.org/wiki/Kernel_%28computing%29
Work in progress...
Links/thanks:
----------------------------------------------------
su (Unix); wikipedia.org
Superuser; wikipedia.org
Bourne shell (sh); wikipedia.org
Bourne-Again shell (bash); wikipedia.org
BusyBox; benno.id.au; BusyBox.net
Kernel; wikipedia.org
----------------------------------------------------
==========================
Main topic
==========================
2. Android platform and it's specifics
adb shell - what is it, for what it is
Android SDK - what is it, tool which provides, where to download
Tools for work with Android adb shell - Terminal Emulator, ADB shell from Android SDK and how to use it
ADB (shell)
ADB - Android Debug Bridge is a versatile tool lets you manage the state of an emulator instance or Android-powered device. It is a client-server program that includes three components:
A client, which runs on your development machine. You can invoke a client from a shell by issuing an adb command. Other Android tools such as the ADT plugin and DDMS also create adb clients.
A server, which runs as a background process on your development machine. The server manages communication between the client and the adb daemon running on an emulator or device.
A daemon, which runs as a background process on each emulator or device instance.
Generally it can be compared with standard cmd prompt in windows (you can write commands which will be executed locally, for example in Terminal Emulator) or it can be just like SSH in unix-like system (you connect to terminal through adb client (in Android SDK) and commands will be run remotely.
Android SDK
Android software development kit is complex set of tools for developing app on Android. It includes fully usable emulator of Android OS on your PC, where you can do everything. You can install/delete apps, browse web page in embedded web browser, play games or make your own application in Eclipse (widely used IDE for development). Of course, with emulator you can use also GPS or camera. Emulated android phone is just like "normal" phone.
Android SDK tools
Fully emulated Android device
Android Development Tools Plugin (Eclipse IDE)
Android Virtual Devices (AVDs)
Hierarchy Viewer
layoutopt
Draw 9-patch
Dalvik Debug Monitor Service (ddms)
Android Debug Bridge (adb)
Android Asset Packaging Tool (aapt)
Android Interface Description Language (aidl)
sqlite3
Traceview
mksdcard
dx
UI/Application Exerciser Monkey
monkeyrunner
Android
zipalign
Tools for work with Android adb shell
You have two ways ho to connect into ADB service - locally and remotely.
Locally - for local access you will need some application which can connect to local adb shell.
Terminal Emulator (free) - probably most commonly used app from market, which works and looks like standard unix shell.
ConnectBot (free) - same as Terminal Emulator, but it can be also used for connecting via SSH or telnet
Remotelly- For remote connection you need phone configuration adjustment:
Home desktop -> [menu button] -> Settings -> Applications -> Development -> USB debugging [ON].
Also you need connect your phone via USB (or finds on market some widget/app, witch enable using ADB also via wi-fi)
adb tool from Android SDK
After download Android SDK, extract archive somewhere (in example I extracted it in c:/AndroidSDK). Then follow instruction on developer.android.com for installation of SDK Platform-tools (contains adb). After installation click on start menu and in Run... (in Windows7 in search bar) enter 'cmd' and press Ok or [enter]. Then write in cmd line:
Code:
cd c:\AndroidSDK\android-sdk-windows\tools [enter]
now you can enter following command to connect to phone's adb shell if you don't have more connected device (virtual or real-one)
Code:
adb shell
If you have more then one, you need explicitly say which one should be used for connection. So list connected devices with
Code:
adb devices
which shows you serial number of connected devices. Than use
Code:
adb -s <serial-number> shell
Links/thanks:
----------------------------------------------------
ADB; android-dls.com; developer.android.com
Android SDK; wiki.androidforum.cz [CZ]
Basic adb/shell commands for noobs; forum.xda-developers.com
15 Useful Android Terminal (ADB Shell) Commands; gadgetsdna.com
----------------------------------------------------
==========================
Main topic
==========================
3. Custom recovery
What custom recovery is
Tools which custom recovery provide - NAND backup/restore, formatting of SDcard, partitioning (ext1,ext2, ext3), wiping, flashing of Custom ROM, ...
Is it save to install that? - potential problems, backup/restore of original recovery
How this whole thing works - installation description (not how-to install, just explanation of what is done during installation)
What custom recovery is
Recovery is image (binary data) stored in internal memory. This image contains something like "program" maybe better say "tool", which can boot-up independently on Android system. In other words, when this tool is running (booted up), than Android system is not. This tool is part of phone system, and in PC terminology recovery can by compared to BIOS with some added features. This recovery state can be reached on all phone, but if you don't have custom recovery, it will do so-called HW reset and automatically restart itself into standard boot mode. So what is difference between original recovery and custom recovery? Custom recovery didn't call master reset after start and also didn't restart itself.
Tools which custom recovery provides
Let's go check what custom recovery brings (I will describe Drellisdee's custom recovery so another recovery can brings another menu and tools)
In Drellisdee's post is picture of main screen with list and description of tools so let's look on it:
ADB as root user
what is root user, and what is adb, you should already know. If not, follow link on main post.
USB-MS Toggle :mounts sdcard as mass storage
It just mounts your phone as USB-mass storage (USB disk) so in PC you will see new disk where you can see folders based on mountes (lower) and were you can upload what you want.
Backup/Restore:
Nand Backup : runs a nandroid backup of data, cache, boot, system
Nand Backup + .android secure : backs up above plus .android_secure on sdcard (froyo native apps on sd)
//Native app which notify "application can be moved into SD card" if you can move some app. It's good to use, if you used it.
Nand + ext backup : data, cache, system, boot, plus apps2sd on ext partition (old style apps2sd)
//old style apps2sd is used on some custom ROM because can move every application into SD card instead of Froyo's apps2sd
Nand Restore : browse to and select nandroid backup to restore
Absolutely GREAT feature. With NAND you can do 1:1 copy (image) of your actual system (phone's memory). It means, that you didn't backup only SMS, contacts or apps, but whole system with all configuration, customization, wallpapers, system's tweaks... just everything - it creates image of whole phone system. This image will be written to your SD card which you are then free to copy around and back up on your computer.
What it means? You find custom ROM which looks awsome so you create NAND backup and install new ROM, but after few hour/days... you know, ROM before was better. So you boot into recovery, use NAND restore of your old ROM backup and .... woala you have your system just like before backup - as if nothing had happened. For about 2 minutes!! It sounds great, isn't? But one, little problem exist. You can not use for restore only some part of backup. You have to restore all, or nothing.
Flash Zip From Sdcard: Update.zip must be in root of sdcard
This tool is designed for install of custom ROM or for tweaks. If you have instruction to install via custom recovery, and file have .zip extension than you should use this menu. Never unzip file, because file contain meta-information about itself with some validate-checks so if you edit it, or unpack and pack back, it shouldn't work. And of course you can't select *.zip file if it doesn't exist because you unpack it, also you have not to rename it to update.zip, you can just select file to update in list of .zip files. And, at the end, file have to be in root (main folder) of sdcard.
Wipe Menu:
Wipe data/factory reset: wipes data & cache
- wipe of users data (contacts, apps, configuration, ...) and cache (caches of applications)
Wipe cache
- wipe cache only
Wipe Dalvik cache : Wipes Dalvik cache in all possible locations if moved by apps2sd
- wipe of Dalvik cache?
Wipe SD:ext : Wipes Apps2sd ext partition
- if you used Partition SDcard option, you can wipe it here
Wipe Battery Stats
- If you think, that your battery life is too short, you can try delete battery stats. Than let phone fully charge. (more)
Wipe rotate settings
- wipe senzor setting (acceleration, ...)
Wipe .android secure : Wipes froyo native .android_secure on sdcard
- wipe information about moved apps
Partition Sdcard:
Partition SD: Partition's sdcard for apps2sd (this formats card so all non backed-up data is lost)
- will create ext2 partition (you will be asked for size of ext2 and cache)
Repair Sd:ext
SD:ext2 to ext3 : coverts apps2sd ext2 partition to ext3 (requires kernel support for ext3)
SD:ext3 to ext4 : same as above but ext3 to ext4 (requires kernel support for ext4)
ext2 - file system for the Linux kernel (no journal, fast but not recovery of I/O error)
ext3 - file system for the Linux kernel (journal, slower than ext2 because of journal, but provides recovery on I/O error)
ext4 - file system for the Linux kernel (journal, enhanced version of ext3)
Links/thanks
----------------------------------------------------
How to increase battery life; androidforums.com
Comparison of file systems; wikipedia.org
ZeroXtreme's filesystem answer (thanks); forum.xda-developers.com
----------------------------------------------------
Mounts:
Gui mounts to avoid typing in terminal to mount and cd into a dir to mount system, data, cache, sd-ext (if exists), sdcard
Other:
Fix apk uid mismatches
//I'm not sure, can somebody helps?
Move recovery log to SD
Toggle Signature Verify : Turn of signature checking on flashing zips
Key Test : Output keycodes for debugging recovery
I thing that this is clear enough.
Is it save to install that?
Well, nothing isn't without any risk. Anyway, from what I know, nobody has had any problems, if Drellisdee's steps are followed, but you have to have P500, not derivate from Sprint, for example. From my point of view the installation of recovery is without any problems. After update with KDZ_FW_UPD tool I had rewritten also recovery. But this tool is really dangerous, so try to avoid to it.
Anyway, original recovery can be backuped before installation of custom recovery and this can be done by command
Code:
dd if=/dev/mtd/mtd2 of=/sdcard/<name-of-old-recovery>.img bs=4096
for example:
Code:
dd if=/dev/mtd/mtd2 of=/sdcard/my-original-recovery.img bs=4096
For restore,just use same step (command) that you used for flashing, but replace name of .img file.
Code:
flash_image recovery /sdcard/my-original-recovery.img
NOTE: You don't have to do other commands before and after as you done for install of recovery!!
So, where can problems arise?
loss of warranty - LG service have much more advanced software and hardware and they can check what problem caused - make dump of memory and so on
bricking of phone - if something goes wrong, then phone may not start at all
deletion of all data if installation fails - if old recovery remains, than hw reset will be performed
custom recovery doesn't work at all - incompatible devices
Why to try?
NAND backup/restore - the most useful tool ever
you can install custom ROM
high count of successful flashing of custom recovery
for now (what I read on forum), when you had said that you brick your phone by standard LG tool, your warranty repair was approved
How this whole thing works (description of installation's steps)
Let's see on how to:
Copy flash_image and recovery-RA-GNM-thunderg-1.1.0.img to the root of your sdcard
Nothing hard I think.
via adb shell or terminal type this from root su # shell. (Do not type the # as its just for reference to show you need a root # shell not a $ user shell)
Ok, it seems that it doesn't make sense, isn't. But what is root and su we already knows, same as user shell and root shell. Also follows commands probably aren't some "normal" task, so some special user approve will be necessary - so it probably means use of root. So, enter 'su [enter]' for become a root.
Code:
[B]# mount -o remount,rw -t yaffs2 /dev/block/mtdblock1 /system[/B]
// remounting of filesystem for write
[B]# cat /sdcard/flash_image > /system/bin/flash_image[/B]
// print contend of flash_image into /system/bin/flash_image (it is just copying)
[B]# chmod 755 /system/bin/flash_image[/B]
// set up file access for running (basic of unix-like systems)
[B]# mv /system/etc/install-recovery.sh /system/etc/install-recovery.sh.bak[/B]
// rename install-recovery as install-recovery.sh.back
// NOTE: many guys haven't this file, so they get error: [I]"failed on '/system/etc/install-recovery.sh' - No such file or directory"[/I]
// it's normal. If it happens, just ignore it and continue.
[B]# mount -o remount,ro -t yaffs2 /dev/block/mtdblock1 /system[/B]
// remount of filesystem into read-only mode
[B]# flash_image recovery /sdcard/recovery-RA-GNM-thunderg-1.1.0.img[/B]
// using of program/script flash_image for flashing of recovery image
// you can do by same way also restore of your original recovery
[B]# reboot recovery[/B]
// reboots into recovery mode
I think, that was also nothing hard. As was said "#" on beginning means that root's shell should be used for running that command. Maybe you remember what I had written, that if you run something on root's account, it doesn't ask for confirmation and will just do it. Same with responses. If there is nothing to say, then nothing will be said. So if command runs without any problems, nothing will be shown. If something doesn't work, than you will be informed.
Key combo to boot custom recovery from powered off is vol_down + home + power and release keys at LG splash.
Nothing special I guess. But I recommend keep vol down + home keep pressed until custom ROM menu appear.
Note this recovery and the one for the LG Vortex have a service that instantly reboots out of recovery once you load it & I disabled it and thats why you get a E: "Bad Boot Message" on inital startup. Its completely fine.
IMPORTANT NOTE!! Too many of n00bs asking "I have problem, E: "Bad Boot Message appeared, what I should do?" Read ALL carefully before every action!!
Recovery Key mapping:
Up & down : vol-up and vol-down
Select : Menu
Backup : Back
Key map for moving in menu (touch screen doesn't work... )
Links/thanks:
----------------------------------------------------
Drellisdee's custom recovery description; androidforums.com
----------------------------------------------------
==========================
Main topic
==========================
4. Custom ROM (generally)
What custom ROM is?
Is it save to install custom ROM? - potential problems
What I need for install?
What can custom ROM brings - kernel, update, performance, customization, theme, ....
what is ...
deodexed, zipaglined, png-optimized
JIT, HW:acceleration, VM.Heap Size, stagefright
apps2sd + dalvik2sd
custom kernel (recompiled, ...)
What custom ROM is?
Custom ROM is every somehow changed manufacturer's ROM or ROM compiled from source code of Android. "Change/s" can starts with adding/removing default application and can extend to kernels, cpu over/under-clocking, enable/disable features (ROOT, HW acceleration, ...), themes (frameworks, color, ...), keyboards and many other features.
Custom ROM is mostly distributed like signed ZIP package with included installation script for custom recovery. This ZIP is flashed via custom recovery tool.
Is it save to install custom ROM?
Yes, it is. May be I can say, that installation of custom ROM is almost mandatory, because it cost you only few minute if you will not be satisfied - you can just restore your old ROM from NAND backup, if you will be satisfied, you can keep it. And yes, you can also use backup tools like for example Astro for backup of your apps or Titanium Backup backup everything (SMS, call list, preferences, APNs, ...) and restore this in your new ROM (NOTE: In this case it's strongly recommended that both ROM should have same or very similar source/base ROM).
So, it is really simple:
1) Do NAND backup
2) Try new ROM
3) Keep new, or restore old one.
What I need for install?
1) Rooted phone
2) Installed custom recovery
3) Signed .ZIP file of ROM compatible with recovery
#) RECOMMENDED: NAND backup of your actual ROM
What does custom ROM bring
Custom ROM brings almost every feature you can image.
ex:
optimization for maximal power (games), long battery life, calling, texting, playing videos,...
awsome look - changed icons, colors, animations, wallpapers, menu, ....
simple work - feature that will short some work (add restart button, reorganized menu, shorts, gestures, ...)
allow tweaking - overclok/underclok your device, ROOT, ....
It's really not possible describe here every possibility what you can do/get with custom ROM.
what is ...
deodexed - needed for using themes. If you want replace/change some file in system (change theme) you need deodex file which you want change. In most cases it's going on services.jar which contains definition of colour for clock for example.
APKs zipaligned - optimization of APK archive, so it takes less memory and is much faster.
png-optimized - png files takes less memory, are loads faster
JIT - just-in-time compilation also known as dynamic translation, is a method to improve the runtime performance of computer programs, but it takes some time to convert into it on start.
HW:acceleration - using of HW acceleration for rendering GUI. Little increase battery consumption.
VM.Heap Size - maximum memory an application can consume
stagefright - In Android 2.2 new media framework that supports local file playback and HTTP progressive streaming
Apps2SD - (mostly DarkTremor's a2sd) If you create ext partition on your SD card, you can mount it like internal memory (you will have more space on phone memory) and move app on SD.
Dalvik2SD - move of Dalvik into SDcard (saves space)
custom kernel - compiled standard unix kernel (can bring support for features like support ext4 for example)
Links/thanks
----------------------------------------------------
P500 custom ROM list; forum.xda-developers.com
What's Deodex and Odex?; forum.xda-developers.com
What Is Zipalign In Android And How To Make Apps Zipaligned; www.addictivetips.com
PNG compress; http://www.gotow.net/creative/wordpress/?p=79
Just-in-time compilation; wikipedia.org
VM Heap size; forum.cyanogenmod.com
stagefright; developer.android.com
----------------------------------------------------
==========================
Main topic
==========================
Thanks
Very good and hard work
Hats off to you.
rakesh_4utoo said:
Very good and hard work
Hats off to you.
Click to expand...
Click to collapse
Thanks You are welcome!!
very very nice guide, cant wait for you to finish it :X ! Thx alot dude for all the hard work!
Very good work!
Please post it on czech androidforum.cz
Thank you,
David Ullmann, Czech Republic
Very nice. A bit rough around the edges but I'm sure most people can understand it easily enough ^__^ Good job. It came like two days too late for me though since I already asked my questions everywhere on xda to install void
raylgo said:
Very nice. A bit rough around the edges but I'm sure most people can understand it easily enough ^__^ Good job. It came like two days too late for me though since I already asked my questions everywhere on xda to install void
Click to expand...
Click to collapse
But you can be happy and proud, that you probably inspired me!
While backing up the old recovery what do you mean by:
recovery-dump-T
My first line went ok in terminal emulator but second line didn't go ok. That's why I am asking this.
Your the Man! Thank You So much! all are much clearer to me now! now lets gets things started!
lekhwani said:
While backing up the old recovery what do you mean by:
recovery-dump-T
My first line went ok in terminal emulator but second line didn't go ok. That's why I am asking this.
Click to expand...
Click to collapse
It is just example
I think this post should be read for evey noob even before powering his mobile on !
Great work !
Sent from my LG-P500 using XDA App
Quite helpful for noobs like me
So...because I wrote what I wanted, you can make suggestions what are you missing here.... I'm looking forward...
how long should the recovery flashing take?
bazo666 said:
how long should the recovery flashing take?
Click to expand...
Click to collapse
Few minutes
hm, i left it running for like half an hour and nothing happenned. then i unplugged the phone from usb and closed the adb shell, because i had to go.
but the phone boots fine so i think nothing has flashed.
what can be the problem?
PHP:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
FEATURES
. The first, the one and the only custom vendor for dynamic partition in the world : I challenge you all to show me who did it before !
. If you find any custom rom with similar work since the first release of this one : it is just a copied and a stolen work [fake Google roms +++] !!!
. Compatible with all regions / basebands / firmwares / device variants
. Works with All AOSP/CAF based ROMs [10] & [11], Experimental, Official & Unofficial [TESTED]
. May works on fake Google roms but i don't take any responsibility
. Mount RO/RW available with no bootloop after reboot ! [Magisk/SU required]
. SafetyNet passed
. Full test passed : audio, ril, wifi, bt, fm radio, camera, sensors, fp scanner, nfc, ...
. All known hardware issues on custom roms are fixed : camera, wifi, bt, hdr playback, chrome ... and overheating !
. Custom Kernel with stock zImage [untouched +++]
IMPORTANT !
. NO firmware change is needed from the user side, so don't repeat this question many times ... just read up again !
. Formatting /data is required when you flash this vendor the first time +++
. Never go back to the previous versions due to the possible build.fingerprint change [Old releases are automatically removed] +++
. Dirty Update : always delete with file/root explorer or in TWRP this folder :
/data/property and reboot
You must delete these files & folders in /product partition from your custom rom
[File/Root explorer needed] :
/product/vendor_overlay/29/etc/audio
/product/vendor_overlay/29/etc/audio_policy_configuration.xml
/product/vendor_overlay/29/etc/audio_policy_engine_configuration.xml
/product/vendor_overlay/29/lib/soundfx
/product/vendor_overlay/29/lib64/soundfx
&
/product/vendor_overlay/29/etc/wifi
/product/vendor_overlay/29/overlay
& finally
/product/vendor_overlay/29/etc/qdcm_calib_data_nt36672c_huaxing_fhd_video_mode_dsi_panel.xml
/product/vendor_overlay/29/etc/qdcm_calib_data_nt36672c_tianma_fhd_video_mode_dsi_panel.xml
Already included in this vendor ... and since i'm the original author !
[ OPTIONAL ]
If you have the madness and the paranoia with security like Google, you can still relock /vendor again to the stock RO state ... But you will not be able to mount /vendor RW again even with root until you reflash the provided vendor.zip again !
How to [terminal or adb shell] :
su
tune2fs -O verity /dev/block/dm-1
*******
!!!
MIUI Users : sorry for you, but this is for custom ROMS " ONLY "
TROLLS & NOOBS, stay away ... Please !
!!!
Prerequisite:
POCO X3 NFC = surya
POCO X3 [no NFC] = karna
No matter where you live : india, china, russia, europe, usa or africa ... !
Kernel Source [Prebuilt] : Here
Created : 2021-02-27
Latest Update : 2021-03-21
DOWNLOAD
RESERVED for "Changelog"
Update : [2021-03-21] Highly Recommended !
- overlay folder [/vendor] : secure & total remove ... R.I.P forever !
You can now remove it from here too ... with no issue :
/product/vendor_overlay/29/overlay
[As always : no /data formatting is required if done in the previous builds !]
Update : [2021-03-20]
fix compatibility with all custom roms [10] & [11] +++ :
- build : preserve AVB structure [R/W still available in root mode]
- tune2fs : restore some stock feature flags [dir_index, huge_file, extra_isize]
- fstab [kernel & vendor] : small update
- vendor selinux : property_contexts fix
- build.prop : clean-up
Update : [2021-03-18]
clean-up & rework from scratch :
. all audio config [over 20 files +++]
. all media_codecs config
. new mixer_paths
[=> Exclusive]
- true resampling fix : r.i.p audio crackling and all audio issues in UX, Dialer, emulators ... etc [forever]
- improve audio & camera recording
- audio/video playback [Speaker, Headphones & BT] : Hi-Fi quality, loud & noiseless
[but first, you must delete these files with your File/Root Explorer:
/product/vendor_overlay/29/etc/audio
/product/vendor_overlay/29/etc/audio_policy_configuration.xml
/product/vendor_overlay/29/etc/audio_policy_engine_configuration.xml
/product/vendor_overlay/29/lib/soundfx
/product/vendor_overlay/29/lib64/soundfx]
Update : [2021-03-12]
- move to global 12.0.8.0 as firmware base [boot & vendor]
- ramdisk :
. disable mi_thermald and re-enable again thermal-engine
[on all custom roms : mi_thermald breaks the proximity sensor & suspend service in deepsleep => avoid hand wave gesture & AOD to work properly !]
. clean up & update
- vendor_selinux : add more camera permissions in property_contexts
- media_codecs : remove unused .xml
- ueventd.rc : rework from scratch
Update : [2021-03-07]
- ramdisk :
. update cpuset & schedtune settings
. improve memory multitasking
. make that "damn" fingerprint truly responsive
. enable UFS powersaving
. some clean-up & disable MIUI audio service
- media_profiles :
. rework from scratch
. add slow motion profile support : up to 1080p/120 fps & 720p/960 fps
. front video camera : add 4K support
- build.prop :
=> update parameters for : camera, ril, performance, playback ... and more
Update : [2021-03-05]
- rework from scratch : init.qcom.sh & init.qcom.post_boot.sh
- ramdisk : clean-up and add init.qcom.power.rc
. fix CPU instability : set 300 mHz as CPU minimum frequency for all cores / update schedutil governor parameters
. cpu_boost : improve touch responsiveness
. add built-in display power saving [for both huaxing & tianma panels]
- vendor permissions : rebuild from scratch / fix wronlgy settled paths (by Xiaomi) in some qti.xml
- camera : rework from scratch ISO/lowlight config
- remove dummy hbtp folder ... since there is no binary to load or device specific config
- targetconfig : update CoreCtlCpu to [0,6]
- build.prop : clean up and move NFC parameters to build_surya.prop
- [Bonus] : Wi-Fi signal improved (x2) !!!
. 2.4 Ghz : 144 => 300
. 5 GHz : 433 => 866
[but first, you must delete this folder, with your File/Root Explorer :
/product/vendor_overlay/29/etc/wifi ]
Update : [2021-03-01]
- update msm_irqbalance.conf
- update audio_effects.conf & remove audio_effects.xml
- universal vbmeta & vbmeta_system added
Update : [2021-02-27]
- initial release
- rework all build.prop (vendor & odm) from scratch
- debloated from unused MIUI folders, files & configs
- Kernel :
. enforcing selinux by default
. workqueue enabled in cmdline => better dynamic refresh rate handling by the CPU & stellar deep-sleep
. fstab reworked from scratch
the image you made is for enable rw or not?
my phone is poco x3 nfc surya
janhammer504 said:
To make things clear :
POCO X3 NFC = surya
POCO X3 (no NFC) = karna
No matter where you live (india, china, russia, europe, usa or africa) ... Choose the right vendor.img for your device !
[Both images were tested by me]
Click to expand...
Click to collapse
please share the surya image
aallii2 said:
please share the surya image
Click to expand...
Click to collapse
check the DOWNLOAD link up !
janhammer504 said:
check the DOWNLOAD link up !
Click to expand...
Click to collapse
tnx bro i'm downloading n i'll test
its not working after restart didnt boot n just go to recovry
aallii2 said:
its not working after restart didnt boot n just go to recovry
Click to expand...
Click to collapse
Wich firmware version you had just before flashing ???
The vendor provided must match the firmware version that you have !!!
janhammer504 said:
PREREQUISITE
- adb enabled (developer options)
- root (Magisk/SU)
- adb for Windows (Minimal ADB and Fastboot, provided)
- USB cable always connected
LIVE Flashing :
adb shell
su
dd if=/sdcard/vendor.img of=/dev/block/dm-1
View attachment 5232189
Reboot your phone right away ... then use your File/Root Explorer to test the mount RO/RW option and reboot again to check that there is no bootloop !
(Optional)
If you have the madness and the paranoia with security like Google, you can still re-enable AVB/Verity again ... But you will not be able to mount /vendor RW again even with root until you reflash the provided vendor.img again !
tune2fs -O verity /dev/block/dm-1
Check the full tutorial here to build your own custom vendor ... if you want !
DOWNLOAD
Click to expand...
Click to collapse
... so, I can confirm that this is indeed working nicely, flashed RW vendor for Surya, just for the sake of the functionality, because I'm not sure about benefits I can get from writeable vendor (forgive my ignorance)...
... Thank you very much for your hard work...
just FYI I did flash it in Ofox recovery in built-in terminal, and also directly from running Android via Termux, so you don't need PC for it, just saying...
jeryll said:
... so, I can confirm that this is indeed working nicely, flashed RW vendor for Surya, just for the sake of the functionality, because I'm not sure about benefits I can get from writeable vendor (forgive my ignorance)...
... Thank you very much for your hard work...
just FYI I did flash it in Ofox recovery in built-in terminal, and also directly from running Android via Termux, so you don't need PC for it, just saying...
Click to expand...
Click to collapse
i use adb shell because terminal is too small for me, and for making tutorial.
the benefit ??? well there are a bunch of fixes to do in /vendor... check here for example
(the images i provided are clean with no modification, so i let developers or users doing their own modifications)
janhammer504 said:
Wich firmware version you had just before flashing ???
The vendor provided must match the firmware version that you have !!!
Click to expand...
Click to collapse
india 12.0.9
magisk 21.4
jeryll said:
... so, I can confirm that this is indeed working nicely, flashed RW vendor for Surya, just for the sake of the functionality, because I'm not sure about benefits I can get from writeable vendor (forgive my ignorance)...
... Thank you very much for your hard work...
just FYI I did flash it in Ofox recovery in built-in terminal, and also directly from running Android via Termux, so you don't need PC for it, just saying...
Click to expand...
Click to collapse
hey bro how you flashed in orangefox?
i tried but this happened:
sh: adb: command not found
aallii2 said:
hey bro how you flashed in orangefox?
i tried but this happened:
sh: adb: command not found
Click to expand...
Click to collapse
in recovery adb not needed, just use
dd if=/sdcard/vendor.img of=/dev/block/dm-1
now i cant install any rom :
updater process ended with error 7
pls help
aallii2 said:
now i cant install any rom :
updater process ended with error 7
pls help
Click to expand...
Click to collapse
O.M.G
it looks like you never used terminal
this is not a flashable file, it's a command line.
open terminal in your recovery to do that.
or use adb shell
janhammer504 said:
O.M.G
it looks like you never used terminal
this is not a flashable file, it's a command line.
open terminal in your recovery to do that.
or use adb shell
Click to expand...
Click to collapse
jeryll said:
in recovery adb not needed, just use
dd if=/sdcard/vendor.img of=/dev/block/dm-1
Click to expand...
Click to collapse
Now this came:
write error: Operation not permitted
jeryll said:
in recovery adb not needed, just use
dd if=/sdcard/vendor.img of=/dev/block/dm-1
Click to expand...
Click to collapse
Now this came:
write error: Operation not permitted
Use Minimal ADB and Fastboot.zip, it's the simplest and the fastest way.
Unzip and click on Minimal ADB and Fastboot.exe
type :
adb shell
su
It works like terminal in Windows. You can't go wrong !
Follow the instructions (1 post) !
aallii2 said:
india 12.0.9
magisk 21.4
Click to expand...
Click to collapse
wtf man, you should pick vendor.img from karna folder not surya !
janhammer504 said:
Use Minimal ADB and Fastboot.zip, it's the simplest and the fastest way.
Unzip and click on Minimal ADB and Fastboot.exe
type :
adb shell
su
It works like terminal in Windows. You can't go wrong !
Follow the instructions (1 post) !
Click to expand...
Click to collapse
i installed 12.0.7.0 global with magisk 22.0 then flashed vendor.img v12.0.7.0 but when restarted it stucked n i pressed power .phone boot but root explorer can't mount rw n just added shell in magisk