Hi all, I have a D101 10.1in phablet that I bricked.
I do have a backup for SP flash Tool but when I try to boot, I get to the splash screen with Decrypt failed, Boot Error!!!
I bricked by using files from another tablet files same model because get error after busy box installation and try a clean installation
I have tried formatting it... and put my old backup just to fix the problem but after the 1 situation get "Decrypt failed, Boot Error!!!"
When I format it. It seems to work because there is nothing at all when I try to boot it.
When I flash the backup I get the splash screen again... (So it's alive... well barely)
here are the details of the phablet:
- MODEL : d101
- MANUFACTURER : alps
- VERSION : 4.2.2 > JELLYBEAN
- PRODUCT NAME : d101
- DISPLAY ID : ALPS.JB3.MP.V1
- BOARD : d101
- MTK PLATFORM : MT6572
- BUILD ID : JDQ39
- BUILD VERSION : vCC01C
- PDA : vCC01C
- UDISK LABEL : vCC01C
- SERIAL NO. : 0123456789ABCDEF
In the Attach Files i give you guys the boot.img lk.bin logo.bin preloader.bin recovery.img secro.bin uboot.img and MT6572_Android_scatter.txt
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
oficial info
pecifications:
General
Operating System - Android 4.2
CPU - MT Cortex A7 Dual-Core
Processor Speed - 1.2GHz
RAM - 1G
Hard Drive Capacity - 8GB
Extended Memory - Support external TF card extend up to 32GB
Gravity Sensor - Yes, 4-dimensional G-sensor
Flash Player - Yes, Support Flash Player 11.0
Click to expand...
Click to collapse
Display
Display Size - 10.1 Inch
Display Technology - Capacitive Touch Screen
Multi-Touch - Yes, 5 points
Display Resolution - 1024 x 600 pixels
Click to expand...
Click to collapse
Camera
Front Camera - 0.3MP
Rear Camera - 2.0MP
Click to expand...
Click to collapse
Connections
Wi-Fi - Yes, Wi-Fi 802.11 b/g/n
3G - Yes, Support external USB 3G modem
GPS - Yes
Bluetooth - Yes, Bluetooth 4.0
Click to expand...
Click to collapse
Telephone - Yes,
2G:GSM850/900/1800/1900MHz
3G:WCDMA850/2100MHz
Click to expand...
Click to collapse
Input/Output Connectors
Ports
1 x Micro USB Interface
1 x Earphone Jack
1 x TF Card Slot
2 x SIM Card Slot
Audio/Video - 3.5mm headphone jack
Built-in stereo loud speaker
Built-in microphone
Battery
Battery Capacity - 4200mAh
Power Adapter
Input 100-240V~50/60HZ / Output 5V 2A
Color - White
Dimensions(L x W x H) - 243 x 165.8 x 10mm
Net Weight - 513g
Accessories
1 x Power Adapter, 1 x OTG Cable
Click to expand...
Click to collapse
You solved this problem? I have the same
Sadly no fix yet
Rebelation said:
Sadly no fix yet
Click to expand...
Click to collapse
I stubbornly looking for a solution to this problem
same problem here
i face the same problem in my XTOUCH PF81 tablet .
lets check some conditions :
what the type of flashing tool you used ?
is the boot file used extension .mpn or .img ??
did you used the correct project number ? (incase of wiselink tool)
1. SP_Flash_Tool_v3.1344.0.212 or SP_Flash_Tool_v3.1316.0.150
2. img
3 How to understand the project number?
Try the wiselink flash tool 4.1 , i think your tablet project number is td710
Where we can Check that project number
check this
Rebelation said:
Where we can Check that project number
Click to expand...
Click to collapse
https://docs.google.com/document/d/1XEl6O7RNls4TzVYieq0ut6IbP19BTEHewvMGaFofw8U/edit?usp=sharing
at the opening of writes (incorrect scatter file format)
Probably need another scatter
muhammad sadiq said:
https://docs.google.com/document/d/1XEl6O7RNls4TzVYieq0ut6IbP19BTEHewvMGaFofw8U/edit?usp=sharing
Click to expand...
Click to collapse
neoxlam said:
at the opening of writes (incorrect scatter file format)
Probably need another scatter
Click to expand...
Click to collapse
just change it from scatter.txt to scatter.sca , and remeber to remove the tick from force high speed , duel core need the full speed option .
wiselink update necessary?
neoxlam said:
wiselink update necessary?
Click to expand...
Click to collapse
no , for me the new version not work , i used 4.1 and didnt accept update , after install its will ask to install drivers update , i think you are already have the preloader drivers so disregard it .
Well that make flash but still the problem did you fix your tab with that flash tool?
Tried in different ways, the error persists
is a great tool but is just to flash nothing more
dont fix the Decrypt failed, Boot Error!!!
I suggested that the need to find a test point on the board. With its aid, you can unlock preloader, but I do not know how to find a test point
Rebelation said:
is a great tool but is just to flash nothing more
dont fix the Decrypt failed, Boot Error!!!
Click to expand...
Click to collapse
im try to flash the boot.img by fastboot command , and its flashed , but when im try the : fastboot erase userdata , its fail due to security reason , i do think this is our problem , system need to be wiped to get boot !!!
muhammad sadiq said:
im try to flash the boot.img by fastboot command , and its flashed , but when im try the : fastboot erase userdata , its fail due to security reason , i do think this is our problem , system need to be wiped to get boot !!!
Click to expand...
Click to collapse
the problem of wipe or not comes when the system start and this is not the problem of "Decrypt failed, Boot Error!!!"
when you have that problem of wipe you get stuck on logo loop and this is not the problem
this is before system starts because he don't recognize charging nothing because dont recognize the nothing
this problem is about decryption system tree is like lost key to decrypt the files and participation´s
imagine like Linux if you encrypt the files of the system with key and if your system loses that key don't recognize so the system you need put key again or format and install again new fresh
all d101 tablets are the same no mather what seller or logo comes on the tab all are the sam matherboard all are fake mtk6582 some come with android 4.4 but also a fake is just clone rom of 4.2 this tablet are great tablets for normal users for us we like root and install all **** and make or own system this tab is s **** because the system comes encrypet when we try do something broken the encrypt system
we have just 4 options
1 Find the point of the encryption point on the bootloaders and make skip that verification
2 find away to get the encryption key and place it again
3 make a new and fresh undecrypt android system installation
4 put this tablet on the trash and buy new one
i agree with the last option
4 put this tablet on the trash and buy new one
hahahahaha:good:
Related
Hi
Have a chinese tablet.
After installing "CWM" and installing "CYANBOOK" , got "Encryption unsuccessful"
I also mention that can not find any way to get in Fastboot nor Key combination & adb commands.
So the only way to install ROM is using "LiveSuitPack" [Power-off tablet, Press VOL - , Insert usb cable] then it start to rewrite ROM.img
❂ All drivers installed for USB (android device) ===> adb devices ---Detected ---> 20080411 Device
I did install Android_2.3.4_20111224.img & Android_4.0.3-base1.0_ctp.img via LiveSuitPack They seems work but Touch Screen does not work and i can not use the device.
And also sun4i_crane_evb-h975_5x0x_0308_0308.img which after passing that icecream logo i stuck in Isolated Alert Triangle Sign and can not pass through.
And en-us-NEW2-ak003.img [official allwiner A10 (white) ROM] no sign of life after boot logo !
★Stock working ROM was from CRANE and was android 4...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
► Some info that i found about this tablet by opening back lead
① Allwinner A10 (CPU)
② ST-M720-v1.2 (On Borad)
③ 20120807 T=1.0MM (On Board)
④ FY015H21-3.5K-A05 FB-D121-02 (Above Barcode)
⑤ FY-70H21P01 (Connection Flat)
► Specify
• 7" capacitive touch screen
• Resolution: 800x480
• Front cam only
• 2D motion sensor for automatic orientation
✖ HINT: in the user manual the model mentioned as HS-7DTB2-4GB BUT its 8 GB internal memory
• 512 rom
• Internal 8 GB
• External (Available)
✔ Could please some one help me to get proper ROM.img for this tablet ? Thanks alot for your time to read this
azithro said:
Hi
Have a chinese tablet.
After installing "CWM" and installing "CYANBOOK" , got "Encryption unsuccessful"
I also mention that can not find any way to get in Fastboot nor Key combination & adb commands.
So the only way to install ROM is using "LiveSuitPack" [Power-off tablet, Press VOL - , Insert usb cable] then it start to rewrite ROM.img
❂ All drivers installed for USB (android device) ===> adb devices ---Detected ---> 20080411 Device
I did install Android_2.3.4_20111224.img & Android_4.0.3-base1.0_ctp.img via LiveSuitPack They seems work but Touch Screen does not work and i can not use the device.
And also sun4i_crane_evb-h975_5x0x_0308_0308.img which after passing that icecream logo i stuck in Isolated Alert Triangle Sign and can not pass through.
And en-us-NEW2-ak003.img [official allwiner A10 (white) ROM] no sign of life after boot logo !
★Stock working ROM was from CRANE and was android 4...
View attachment 2192879
View attachment 2192880
► Some info that i found about this tablet by opening back lead
① Allwinner A10 (CPU)
② ST-M720-v1.2 (On Borad)
③ 20120807 T=1.0MM (On Board)
④ FY015H21-3.5K-A05 FB-D121-02 (Above Barcode)
⑤ FY-70H21P01 (Connection Flat)
► Specify
• 7" capacitive touch screen
• Resolution: 800x480
• Front cam only
• 2D motion sensor for automatic orientation
✖ HINT: in the user manual the model mentioned as HS-7DTB2-4GB BUT its 8 GB internal memory
• 512 rom
• Internal 8 GB
• External (Available)
✔ Could please some one help me to get proper ROM.iso for this tablet ? Thanks alot for your time to read this
Click to expand...
Click to collapse
I found this Rom From AIRPAD 97F2-D1-H1-H01-1714.20120307.img works fine except Rotation and Front cam. (CPU heat up)
Any help?
How did u find a version of cwm that was compatible with ur tablet. I have a similar issue with a tablet I bought for my daughter called "The Meep".
Sent from my HTC6435LVW using xda premium
MeepTablet CWM
NinjaPerv said:
How did u find a version of cwm that was compatible with your tablet. I have a similar issue with a tablet I bought for my daughter called "The Meep".
Sent from my HTC6435LVW using xda premium
Click to expand...
Click to collapse
First off all, you are asking a Question on my Question , you need to start a new Q in Question section.
BTW.
Your Tablets Specs:
CPU: 1.0GHz Cortex A8
RAM: 512
Screen size: 7 inch
resolution :800x480
Storage: 4GB internal + SD card slot
G Sensor = yes
▲WARNING: Try this at your own risk, if you don't know what your doing
__________________________________
DOWNLOAD : ClockWorkMod for Cortex a8
__________________________________
.
azithro said:
First off all, you are asking a Question on my Question , you need to start a new Q in Question section.
BTW.
Your Tablets Specs:
CPU: 1.0GHz Cortex A8
RAM: 512
Screen size: 7 inch
resolution :800x480
Storage: 4GB internal + SD card slot
G Sensor = yes
▲WARNING: Try this at your own risk, if you don't know what your doing
__________________________________
DOWNLOAD : ClockWorkMod for Cortex a8
__________________________________
.
Click to expand...
Click to collapse
Ur right, I did ask a question on ur question. Not sure the problem with that considering the nature of the question I asked. If I would have asked a question that had absolutely nothing to do with ur topic then I could see why ud say that. So u know, myself and a handful of other people have been posting question after question after question regarding this tablet with no answers at all. I saw ur topic and that u secceasfully managed to flash a working recovery on a similar unknown tablet so I had to ask how u did it. Thank u for the response. I'm gonna give that version of cwm a shot and see wut happens.
On a side note, how do I get 1080p hd on my original Motorola droid and can someone walk me thru the steps to make it waterproof? Thanks!
Sent from my HTC6435LVW using xda premium
NinjaPerv said:
1-How do I get 1080p hd on my original Motorola droid and
2-Can someone walk me thru the steps to make it waterproof?
Click to expand...
Click to collapse
1- Turn off the encryption and the phone will go through a security boot cycle.
You will see so reduce resolution warning back, when you chose to encrypt data.
After the boot, go back to the camera and check the options and now you have 1080p recording option back.
2-Use or buy iOttie Waterproof Skin Case from any shop or Amazon ( ORDER ONLINE )
Touché touché. Ok then.... how do I install android 4.3 jellybean on my Super Nintendo? Once that's done, how do I root it and flash a custom recovery? Ur move
Sent from my HTC6435LVW using XDA Premium 4 mobile app
NinjaPerv said:
Touché touché. Ok then.... how do I install android 4.3 jellybean on my Super Nintendo? Once that's done, how do I root it and flash a custom recovery? Ur move
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Dude you keep asking your Question in my topic, Plz open a new Q , and then ask your question.
Homemade rom port for Meep!
hello my friends, i have a modified rom of LY-F1 with meep! kernel, and modules. Script.bin and init.sun4i.rc are modified.
No bugs.
Wifi...........ok
Touch........ok
Sound.......ok
Cam..........ok
Hdmi.........ok
Gsensor....ok
The image burn with livesuit.
The forum does not let me put links of my rom :crying:
In youtube search: Meep! Oregon scientific ported ROM (LY-F1)
Sorry my bad english, i am spanish.
unknown tablet
hello sir ,
I use oplus xonpad 7 tablet i want custome room but i cant find my phone in xda list can you help me please i want custome rom for my tablet
I have recently bought OPlus XONPAD 7 tablet, I want to get root access to allow some app. Is there any way for this?
Bro...use fram root 1.5.3 to root u r device..first install framroot 1.5.3 and install super user frm play store and root u r device..i did the same thing...works 100%..dont forget 2 thank me
Sent from my oplus xonpad 7 using XDA Free mobile app
sachinm said:
I have recently bought OPlus XONPAD 7 tablet, I want to get root access to allow some app. Is there any way for this?
Click to expand...
Click to collapse
Try KingRoot app
Hi everyone, i'm from Brazil, and i need a liitle help.
This week, i bought a chinese tab, Foston FS-M787S, but it comes with a lot of chinese apps and without root, with this tutorial: http://forum.xda-developers.com/showthread.php?t=2343531&highlight=gt811+inverted i installed Cyanogenmod 10 in it. But the touchscreen don't work, when i applied the patch, the touchscreen is inverted. Searching in the web, i found a app called "Android Tablet Touch Solution - by RTO-TEAM", and i tried options from 1 to 5, to found the right option, the display driver of this tablet is gt811. when i run the option 6, all scripts don't work, but the last script "updating boot image" is ok. after this, the tablet don't pass from foston screen (the first screen that appears when it start up), don't enter in recovery, just stop in this screen. Please help me!!!! The only option that work (to recognize in pc, not as removable storage or debug) is when i press 'home' button and reset button (not power). But nothing happens! Help me please!!!
OBS: I make a backup of the factory rom with clockworkmod, but is in internal storage of tablet
Help me to found a way to reinstall the factory system and unbrick the tablet!!!! Please
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Tablet Specs:
Chipset: Allwinner A13
CPU: ARM Cortex-A8 1.2GHz
GPU: ARM Mali-400MP
Screen: 854x480 7.0" LCD with 5 point Multitouch
Camera: VGA Camera, 5.0MPx Camera with VGA Recording
Factory Operating System Android 4.0.4
Cyanogenmod patches used, and listed in 'lsmod' on factory rom
Touchscreen: GT811
G-sensor: mma7660
Camera: sp0838
platinumlayer said:
Hi everyone, i'm from Brazil, and i need a liitle help.
This week, i bought a chinese tab, Foston FS-M787S, but it comes with a lot of chinese apps and without root, with this tutorial: http://forum.xda-developers.com/showthread.php?t=2343531&highlight=gt811+inverted i installed Cyanogenmod 10 in it. But the touchscreen don't work, when i applied the patch, the touchscreen is inverted. Searching in the web, i found a app called "Android Tablet Touch Solution - by RTO-TEAM", and i tried options from 1 to 5, to found the right option, the display driver of this tablet is gt811. when i run the option 6, all scripts don't work, but the last script "updating boot image" is ok. after this, the tablet don't pass from foston screen (the first screen that appears when it start up), don't enter in recovery, just stop in this screen. Please help me!!!! The only option that work (to recognize in pc, not as removable storage or debug) is when i press 'home' button and reset button (not power). But nothing happens! Help me please!!!
OBS: I make a backup of the factory rom with clockworkmod, but is in internal storage of tablet
Help me to found a way to reinstall the factory system and unbrick the tablet!!!! Please
Tablet Specs:
Chipset: Allwinner A13
CPU: ARM Cortex-A8 1.2GHz
GPU: ARM Mali-400MP
Screen: 854x480 7.0" LCD with 5 point Multitouch
Camera: VGA Camera, 5.0MPx Camera with VGA Recording
Factory Operating System Android 4.0.4
Cyanogenmod patches used, and listed in 'lsmod' on factory rom
Touchscreen: GT811
G-sensor: mma7660
Camera: sp0838
Click to expand...
Click to collapse
Friends .
First I would like to congratulate you for the initiative to install the rom in JLB foston FS - M787S .
Well I had problems with my FS - M787s , I needed to install your rom , because by the firmware of my problems , I could not do a backup .
Acquire another FS - M787S , with original Rom working perfectly , plus the accelerometer chip is different . Is mma 7660 and standing with his rom is DMAR06 .
Good not see the problem , unfortunately most of the battery which is with Rom Jely BEAN 4.1.1 , warms the A13 chip and drains the battery very fast .
I made a backup of the original rom FS - M787S which is working perfectly , via ClockworkMod .
More to try to make the recovery of this backup original rom in Rom FS - M787S with JB , the finalikzar the restore and boot , it boots up more FOSTON lock the screen after the video of the car on the highway .
I opened the two FSM- 787s . The only difference is the chip accelerometer that in FS - M787 rom with original model MMA7660 , and the other is DMAR06 .
I would love to be able to leave the two with the original rom foston .
Are there other ways to make an image or backup that can actually restore the Tablet ?
thank you
Wilton said:
Friends .
First I would like to congratulate you for the initiative to install the rom in JLB foston FS - M787S .
Well I had problems with my FS - M787s , I needed to install your rom , because by the firmware of my problems , I could not do a backup .
Acquire another FS - M787S , with original Rom working perfectly , plus the accelerometer chip is different . Is mma 7660 and standing with his rom is DMAR06 .
Good not see the problem , unfortunately most of the battery which is with Rom Jely BEAN 4.1.1 , warms the A13 chip and drains the battery very fast .
I made a backup of the original rom FS - M787S which is working perfectly , via ClockworkMod .
More to try to make the recovery of this backup original rom in Rom FS - M787S with JB , the finalikzar the restore and boot , it boots up more FOSTON lock the screen after the video of the car on the highway .
I opened the two FSM- 787s . The only difference is the chip accelerometer that in FS - M787 rom with original model MMA7660 , and the other is DMAR06 .
I would love to be able to leave the two with the original rom foston .
Are there other ways to make an image or backup that can actually restore the Tablet ?
thank you
Click to expand...
Click to collapse
Hey buddy, i am from brazil too
Did you solved this problem?
I have one tablet of this in my home and i would try to change its rom
General Thread For LG Optimus L4 II E440 E445
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
THIS THREAD WILL INCLUDE BUT NOT LIMIT TO :1. DESCRIPTION
Thanks to www.GSMARENA.com
Code:
GENERAL 2G Network GSM 850 / 900 / 1800 / 1900
3G Network HSDPA 900 / 2100
SIM Yes
Announced 2013, June
Status Available. Released 2013, July
BODY Dimensions 112.5 x 64.7 x 11.9 mm (4.43 x 2.55 x 0.47 in)
Weight 125 g (4.41 oz)
DISPLAY Type IPS LCD capacitive touchscreen, 16M colors
Size 320 x 480 pixels, 3.8 inches (~152 ppi pixel density)
Multitouch Yes
SOUND Alert types Vibration, MP3 ringtones
Loudspeaker Yes
3.5mm jack Yes
MEMORY Card slot microSD, up to 32 GB
Internal 4 GB, 512 MB RAM
DATA GPRS Class 12 (4+1/3+2/2+3/1+4 slots), 32 - 48 kbps
EDGE Class 12
Speed HSDPA, 7.2 Mbps; HSUPA, 5.76 Mbps
WLAN Wi-Fi 802.11 b/g/n, Wi-Fi Direct, Wi-Fi hotspot
Bluetooth Yes, v3.0 with A2DP, HS
USB Yes, microUSB v2.0
CAMERA Primary 3.15 MP, 2048 x 1536 pixels, LED flash
Features Geo-tagging
Video Yes, [email protected]
Secondary No
FEATURES OS Android OS, v4.1.2 (Jelly Bean)
Chipset Mediatek MT6575
CPU 1 GHz Cortex-A9
GPU PowerVR SGX531
Sensors Accelerometer, proximity, compass
Messaging SMS (threaded view), MMS, Email, Push Email, IM
Browser HTML
Radio FM radio
GPS Yes, with A-GPS support
Java Yes, via Java MIDP emulator
Colors Black, White
- SNS integration
- Xvid/MP4/H.264/H.263/WMV player
- MP3/WAV/WMA/eAAC+ player
- Google Search, Maps, Gmail
- YouTube, Google Talk
- Document viewer
- Photo viewer
- Organizer
- Voice memo
- Predictive text input
BATTERY Type Li-Ion
Capacity 1700 mAh
Stand-by Up to 600 h
Talk time Up to 12 h 30 min
MISC SAR EU 0.64 W/kg (head)
0.60 W/kg (body)
2. WINDOWS ROOTING GUIDE
*this guide will work on most android phones
Download THIS PROGRAM (VROOT)
Install Program
Enable USB Debugging in settings (TICK CHECK-BOX IN Settings>>>Developer options>>>USB debugging){Opciones de desarrollador USB ON}
Plug your phone to PC using usb cable in "LG software" / "debug" mode
If you are connecting your phone to your pc for the first time you need to install lg drivers from first autorun when phone plugged in ( If autorun disabled navigate to lg removable drive and run LGAutoRun.exe) follow on-screen instructions or download drivers from LG Official Website HERE
Ensure all drivers have installed correctly (no yellow triangles in "Device Manager")
Run VROOT As Administrator On PC
program will connect to your phone and tell you your phone model and if phone is rooted (obviously our's is not)
Click ROOT in right bottom corner
program will install Chinese sync/managment app (you can remove app later) on your phone and install Kinguser superuser app on your phone (you can replace this with your favourite superuser app <i kept Kinguser and i'm happy>)
Your phone will reboot when completed
3. BOOTLOADER UNLOCK
NOT YET :/
4. CUSTOM RECOVERY
LBL (Locked Bootloader) Recovery from LG L5 II Works
FILES AND INSTRUCTIONS FOUND HERE
5. MOD's
TheMysteryouseHAS PORTED AROMA CUSTOM STOCK PACKAGE BY Slipsystem
ALL INFO FOUND HERE
*ALPHA STATE ON THIS DEVICE !!!!
make sure to backup before flash
Speria_LG_L4_II_E440.zip
MIRROR
PLEASE RUN THIS TOOL AND UPLOAD RESULTS THIS TOOL TO HELP US PORT FOR YOUR DEVCE'S (dual's and such)
*link will be back up soon
please run THIS to provide us with list of files from your phone to complete the debloat from unwanted system apps
6. ROM's
NOT YET :/
7. GENERAL FAQ
Tags:
@jp1296 @gorankx
@sasays
@smartuser001
@sospeed
@teoesdios
@Paul!us @dodo333 @blubbiblubbkekz
@nasko_spasko @cyberangel22k
@TheMysteryouse
@slipsystem
@kimerika
X. Just a Tip
IF someone is pissed off like me when you plug your phone to usb and have to click 3 times before phone connects
1. DIAL 3845#*440# or 445
2. UN-CHECK BOX IN: "Settings">>>"Auto run">>>"AutoRun Enable"
3. Reboot (not sure if necessary but i did)
NO MORE CHECKING FOR DRIVERS / SKIP EVERY-TIME YOU PLUG YOUR PHONE IN
RESERVE
it might get FAT
DOES ANYONE FIND THE TIP USEFUL ?
Even though I was gone for a while, I'm still working on the bootloader. Expect updates from me.
Nice, Iggy
This is gonna be a loooong post. Though, I was checking the VRoot part, and change the part of putting it in "LG Software" mode, to "Debug" mode. Only takes it if you are debugging, and have to do that with the phone disconnected from the pc, in Development options (sorry, I have it in spanish "Opciones de desarrollador")
--------------------------------------------------------------------------
done
teoesdios said:
Nice, Iggy
This is gonna be a loooong post. Though, I was checking the VRoot part, and change the part of putting it in "LG Software" mode, to "Debug" mode. Only takes it if you are debugging, and have to do that with the phone disconnected from the pc, in Development options (sorry, I have it in spanish "Opciones de desarrollador")
--------------------------------------------------------------------------
Click to expand...
Click to collapse
i mentioned to enable usb debugging before the lg software part
IGGYVIP said:
i mentioned to enable usb debugging before the lg software part
Click to expand...
Click to collapse
Hahaha no need to spanish it xD But nice!
New we need us some CRoms and mods >.<
updating
teoesdios said:
Hahaha no need to spanish it xD But nice!
New we need us some CRoms and mods >.<
Click to expand...
Click to collapse
wait 10 minutes
Edit :
UPDATED #1
MOD SECTION
Check this out it might work
SLIMSYSTEM V2.3 JORDAN
CHOOSE L5 II VERSION
DO NOT USE THE SYSTEMUI MOD
IF YOU USE CUSTOM LAUNCHER YOU MIGHT NOT BE ABLE TO CHANGE WALLPAPER
IGGYVIP said:
wait 10 minutes
Edit :
UPDATED #1
MOD SECTION
Click to expand...
Click to collapse
Downloading! Also, the PorTool link isn't working again xD I think you deleted it by mistake
EDIT: Nope, and my WIFI doesn't work anymore xD I can't turn it on.
I don't see any changes nor displaying in the About section of the options. It just resets it to factory.
teoesdios said:
Downloading! Also, the PorTool link isn't working again xD I think you deleted it by mistake
Click to expand...
Click to collapse
while you on the stock please run the tool to give us filelist.txt
this will help complete debloat and make compatibile but can be done only when on stock
the link forport will be back up tomorrow
Hmm
teoesdios said:
EDIT: Nope, and my WIFI doesn't work anymore xD I can't turn it on.
I don't see any changes nor displaying in the About section of the options. It just resets it to factory.
Click to expand...
Click to collapse
mysteryouse was succesfull maybe package corrupted
try the mirror that's the one he sent me
hmm wifi is common bug on the L5 II was it always ok before ?
if it was please upload your system backup maybe there is a way to fix on yours and L5 II
IGGYVIP said:
mysteryouse was succesfull maybe package corrupted
try the mirror that's the one he sent me
hmm wifi is common bug on the L5 II was it always ok before ?
if it was please upload your system backup maybe there is a way to fix on yours and L5 II
Click to expand...
Click to collapse
Let me back it up, and upload it ^^
EDIT 1: WIFI Worked weird. I could only connect to the wifi I set on the Setup at the start. If I tried to connect to another, like when going to the mall or at work, it would reset my phone.
are you back on stock ?
teoesdios said:
Let me back it up, and upload it ^^
EDIT 1: WIFI Worked weird. I could only connect to the wifi I set on the Setup at the start. If I tried to connect to another, like when going to the mall or at work, it would reset my phone.
Click to expand...
Click to collapse
is so please run the filelist tool
and please backup /system and upload
IGGYVIP said:
is so please run the filelist tool
and please backup /system and upload
Click to expand...
Click to collapse
The whole /system folder? XD It's like 900mb :S Let me see if I can compress it a little bit.
And which filelist tool? ._.
Uploading /system folder (got it half compressed 2 times xD)
teoesdios said:
The whole /system folder? XD It's like 900mb :S Let me see if I can compress it a little bit.
And which filelist tool? ._.
Uploading /system folder (got it half compressed 2 times xD)
Click to expand...
Click to collapse
https://www.dropbox.com/s/meo7a7lzh8ghfco/filelistpull.zip
Here's my system folder: https://onedrive.live.com/redir?resid=BCE3841943B1AED1!6966
And my FileList file: https://onedrive.live.com/redir?resid=BCE3841943B1AED1!6967
WARNING
When i ported the mod to the LG L4 i selected wipe system.WHAT EVER YOU DO DON'T PRESS WIPE SYSTEM BECAUSE IT IS GOING TO WIPE THE LG SYSTEM.UI
----------------------------------------------------
Does anyone know how to extract the .kdz file for the L4? If anyone know pls tell me bcs i want to port something to the phone ( no spoilers ^_^ )
Any development? My internet went down since this morning and couldn't start working until now xD
Question: Do any of you have a working base to work? Doesn't matter what change do I do, I still get (Status 0).
Halo people. Nice to see that there is hope to our device. Maybe some developer have idea how to get CM to our device. Great work all of you!
Sent from my LG-E440 using XDA Premium 4 mobile app
Do any of you have a working base rom?
This is the stock Rom of N & M for Yoga Book LTE & WIFI for the needers
if any dev want to help me developing a dual boot for Yoga Book, just PM me or join Telegram Group for Yoga Book devs and users:
MOD EDIT: LINK REMOVED
Prees the Thanks button if that helps you
How to install it:
Be careful, these steps will erase all your data on tablet and will downgrade rom (stock marshmallow)
First of all: read and understand all of the instructions.
1. Download the stock ROM
https://cloud.kolyandex.su/index.php/s/4WDt6ghOzHAyP4s (Nougat WiFi version)
https://easy-firmware.com/home/browse/category/id/19521/ (Marshmallo LTE version)
https://androidfilehost.com/?fid=817550096634799507 (Marshmallo WiFi version)
2. Extract it to some folder
3. Download Intel Platform Tool Lite from here: https://01.org/android-ia/downloads/intel-platform-flash-tool-lite
4. Install Intel Platform Tool Lite
4. Boot into fastboot mode
5. Run Intel Platform Tool Lite
6. Make sure your tablet is recognized by the tool (otherwise you need to enable USB-debug in Developer settings)
7. Select "flash_update_from_eng.json" from folder in (2)
8. Push "start to flash"
9. Wait... (You should check tablet's screen in order to lock/unlock bootloader (it should be locked after flash in order to install OTA updates))
10. Reboot tablet
11. Your keyboard might not work: that is normal (just use on-screen keyboard for now)
12. After initial setup: open Contacts app, create new one (if there are no contacts yet), tap search and enter ####6020#
13. Choose your region
14. Reboot
15. Setup again (now halo should work)
16. Go into settings -> about -> updates and update till the last version (may take several hours)
17. Say thanks for alexjustes for his Amazing Steps
Thank you so much for posting this!
Have you tried flashing this through @danjac's TWRP build? I know trying to restore any nandroid backup made after the OTA upgrade to Nougat results in a boot loop.
beltani said:
Thank you so much for posting this!
Have you tried flashing this through @danjac's TWRP build? I know trying to restore any nandroid backup made after the OTA upgrade to Nougat results in a boot loop.
Click to expand...
Click to collapse
Unfort. no, because i dont have a YB Android Version, i have win ver.
THE MAXIMUM POWER said:
Unfort. no, because i dont have a YB Android Version, i have win ver.
Click to expand...
Click to collapse
I'm 99% sure this isn't flashable in custom recovery, at least without some modification and repackaging. It's a package designed for Intel Phone Flash Tools.
Still a huge asset, though, so thanks again!
beltani said:
I'm 99% sure this isn't flashable in custom recovery, at least without some modification and repackaging. It's a package designed for Intel Phone Flash Tools.
Still a huge asset, though, so thanks again!
Click to expand...
Click to collapse
Same, it can only flashed through fastboot mode
I got myself into quite the pickle today. I've been considering selling my Yogabook to switch to a Chromebook 2-in-1. I wanted to get the device back to as full vanilla as possible. I "thought" the first step was to lock the bootloader again and then do a full factory reset, apparently not... After booting back up from locking the bootloader I kept getting an Intel "bootloader error code 01" and Android would not start. It would take me to fastboot mode on it's own but I was unable to use the power button to make a selection and the device would just power off after 5 minutes. Thankfully from there or fore powering off I could hold Volume up on startup and get to fastboot manually or recovery. It being in a locked state now though I couldn't do much of anything else, no flashing anything other than loader, no format, no erase, and TWRP was not able to be booted.
Anyway I finally read a post about DNX mode and how to get to it, but nothing on how to really use it or any decent information imho. After finally finding some users on another part of the forum discussing a DNX flashing tool made for their devices HTC I went searching for a tool for the Lenovo. Lenovo has nothing for this (shame on you Lenovo!) but Intel does have it and it can be used with the recovery image posted above in this thread (and I assume all the others running around). And here is the URL for the tool
https://01.org/android-ia/downloads/intel-platform-flash-tool-lite
You just have to load a valid JSON file containing the proper config information for the ROM you are flashing iwithin the Intel tool. For this particular version of the ROM I did have to modify the "flash_recover_dnx.json" file to remove this section
Code:
{
"duration" : 5000,
"restrict" : null,
"tool" : "sleep"
},
Otherwise the flash tool would not load it due to the a bad tool from this JSON config named "tool". No other changes to the settings of the Intel flashing tool were needed.
Just click "Start to Flash" and once it was done all was well. Took a little over five minutes, it unlocked, flashed, and locked the device again itself.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
No more Intel error stating the device isn't secure every reboot. I did lose all my data that was on it doing this but I wasn't worried about that going into it.
After initial setup in Android I did have to do the trick noted here to get the Halo keyboard working again which then required initial setup once more.
Hope this helps others.
@MarkAllen, thank you for your valuable information. This will help people unbrick their devices.
MarkAllen said:
I got myself into quite the pickle today. I've been considering selling my Yogabook to switch to a Chromebook 2-in-1. I wanted to get the device back to as full vanilla as possible. I "thought" the first step was to lock the bootloader again and then do a full factory reset, apparently not... After booting back up from locking the bootloader I kept getting an Intel "bootloader error code 01" and Android would not start. It would take me to fastboot mode on it's own but I was unable to use the power button to make a selection and the device would just power off after 5 minutes. Thankfully from there or fore powering off I could hold Volume up on startup and get to fastboot manually or recovery. It being in a locked state now though I couldn't do much of anything else, no flashing anything other than loader, no format, no erase, and TWRP was not able to be booted.
Anyway I finally read a post about DNX mode and how to get to it, but nothing on how to really use it or any decent information imho. After finally finding some users on another part of the forum discussing a DNX flashing tool made for their devices HTC I went searching for a tool for the Lenovo. Lenovo has nothing for this (shame on you Lenovo!) but Intel does have it and it can be used with the recovery image posted above in this thread (and I assume all the others running around). And here is the URL for the tool
https://01.org/android-ia/downloads/intel-platform-flash-tool-lite
You just have to load a valid JSON file containing the proper config information for the ROM you are flashing iwithin the Intel tool. For this particular version of the ROM I did have to modify the "flash_recover_dnx.json" file to remove this section
Code:
{
"duration" : 5000,
"restrict" : null,
"tool" : "sleep"
},
Otherwise the flash tool would not load it due to the a bad tool from this JSON config named "tool". No other changes to the settings of the Intel flashing tool were needed.
Just click "Start to Flash" and once it was done all was well. Took a little over five minutes, it unlocked, flashed, and locked the device again itself.
No more Intel error stating the device isn't secure every reboot. I did lose all my data that was on it doing this but I wasn't worried about that going into it.
After initial setup in Android I did have to do the trick noted here to get the Halo keyboard working again which then required initial setup once more.
Hope this helps others.
Click to expand...
Click to collapse
Thank You for the INFOS
The tool does not recognized my device
Please help to flash my yoga book.
Got these with the stock .json file as described above:
06/18/18 12:00:01.188 ERROR : No description value in command sleep
06/18/18 12:00:01.188 ERROR : Cannot create command with tool "sleep"
06/18/18 12:00:01.188 ERROR : Tool sleep not found or invalid tool configuration
Opened that file in notepad and deleted the sleep section - started flashing.
The usb drivers are definitely required, I lost the connection because they weren't loaded. I installed them and refreshed device manager and she started receiving the flash.
Used Win7 to flash also, the intel page says its not supported.
Flash success and locked bootloader after entering the country code - thanks very much all!
jeitana said:
Please help to flash my yoga book.
Click to expand...
Click to collapse
Try installing Android SDK drivers in you PC
Guys, if anyone faced a Probleme during his way to flash the ROM, PLZ tell me the problems with More Details
_Deeb0_ said:
Got these with the stock .json file as described above:
06/18/18 12:00:01.188 ERROR : No description value in command sleep
06/18/18 12:00:01.188 ERROR : Cannot create command with tool "sleep"
06/18/18 12:00:01.188 ERROR : Tool sleep not found or invalid tool configuration
Opened that file in notepad and deleted the sleep section - started flashing.
The usb drivers are definitely required, I lost the connection because they weren't loaded. I installed them and refreshed device manager and she started receiving the flash.
Used Win7 to flash also, the intel page says its not supported.
Flash success and locked bootloader after entering the country code - thanks very much all!
Click to expand...
Click to collapse
Is this compatible with the Yoga Book A12?
I have been away for a while. Why should I want to install this rom?
Ok I wanted to reset this tablet because the SystemUI ap was using %25 of the cpu constantly, I do not know when and hopw this piece of **** got to that level of crappy update, must be some google crap
- Can I unlock the OEM bootloader?
- Can I still use the twrp->Magisk method to root this?
thanks
Shawnki91 said:
Is this compatible with the Yoga Book A12?
Click to expand...
Click to collapse
Sorry but no
hajkan said:
I have been away for a while. Why should I want to install this rom?
Click to expand...
Click to collapse
No Need to reinstall this Rom if you have already your System, both are 100 % same
hajkan said:
Ok I wanted to reset this tablet because the SystemUI ap was using %25 of the cpu constantly, I do not know when and hopw this piece of **** got to that level of crappy update, must be some google crap
- Can I unlock the OEM bootloader?
- Can I still use the twrp->Magisk method to root this?
thanks
Click to expand...
Click to collapse
Reinstall the Rom will fix this, but doing factory reset will fix this too
In case anyone wants the wifi only M firmware here it is https://androidfilehost.com/?fid=817550096634799507
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Notes:
These are built with kernels from the latest Beelink GT-King (Amlogic S922X w/ w400 reference board) and Beelink GT1mini (Amlogic S905X2 w/ u212 reference board) firmware, but will probably work on any device based on the same reference boards.
The signed .ZIP files are suitable for installation with stock OEM recovery, but they use platform test keys and so might not work on builds requiring release keys.
If your device uses Android Verified Boot, there are additional measures you must take to successfully boot with a custom recovery partition.
Some OEM firmware have a stock recovery auto-restoration "feature" that will immediately replace TWRP after you reboot to system. The easiest workaround is simply to reboot to recovery immediately after the flash by holding the reset button. You can also try renaming /system/recovery-from-boot.p.
This is unofficial and unsupported, so the usual caveats apply. Since we don't flash the bootloader, you should be able recover from any problems...but nothing is guaranteed.
Not working:
MTP & ADB
Downloads:
S922X (Amlogic w400 reference board):
twrp-9.0-w400-3.7.0-0.img
twrp-9.0-w400-3.7.0-0-signed.zip
S905X2 & S905X3 (Amlogic u212 reference board):
twrp-9.0-u212-3.7.0-0.img
twrp-9.0-u212-3.7.0-0-signed.zip
Change Log:
v3.7.0-0: (20221204)
Updated to TWRP 3.7.0 release built from OMNI branch.
Updated to 007P0 LPDDR4 (u212) and 921P0 (w400) kernels.
v3.3.1-0: (20191111)
Switched from KM9 to GT1mini kernel
v3.2.3-0: (20190929)
Initial release
Instructions:
From OEM update app:
Copy .ZIP file to flash drive or microSD card
Open the UPDATE app and select Local Update
Select the .ZIP file and confirm
Note: No need to wipe data or cache
From OEM stock firmware (with root):
Open terminal window (e.g. Terminal Emulator for Android by Jack Palevich)
Navigate to location of .IMG file
Type the following:
Code:
su
dd if=twrp.img of=/dev/block/recovery
reboot recovery
From existing TWRP install:
Copy .IMG file to flash drive or microSD card
Click Install->Select Storage and pick the external drive
Click Install Image and select the .IMG file
Select Recovery partition and swipe to install
Reboot to Recovery
Source:
android_device_amlogic
Donations:
Your support is always appreciated! Just click here.
Hi!
I put your recovery using the UPDATE app method and I am unable to boot to it using "adb reboot recovery". Got a black screen
knuxxx said:
I put your recovery using the UPDATE app method and I am unable to boot to it using "adb reboot recovery". Got a black screen
Click to expand...
Click to collapse
Sounds like your box is using AVB 2.0.
Can someone please assist with how to root the U211 devices? TWRP works great, SuperSu 2.82 installs successfully via TWRP but when the system boots, it's still not rooted.
Any help is greatly appreciated here
Hey I'm stuck on bootloop, any hElp please? Gtking (S922X)
Vee89 said:
Hey I'm stuck on bootloop, any hElp please? Gtking (S922X)
Click to expand...
Click to collapse
Do you perhaps have the DDR4 (S/N: B922X) version of the GT-King? This one was build for the LPDDR4 (S/N:922X) hardware revision.
Magendanz said:
Do you perhaps have the DDR4 (S/N: B922X) version of the GT-King? This one was build for the LPDDR4 (S/N:922X) hardware revision.
Click to expand...
Click to collapse
I have : S/N:922XHQHE00129
Do you know a way to boot in recovery?
Vee89 said:
I have : S/N:922XHQHE00129
Click to expand...
Click to collapse
That *should* work then.
Vee89 said:
Do you know a way to boot in recovery?
Click to expand...
Click to collapse
Just hold the reset switch in for about 20 seconds while connecting power.
Fastboot mode is more of a challenge on the GT-King, since it can't get enough power from the USB cable by itself. You've got to hold the reset switch while simultaneously connecting both power and the USB cable to the back port.
Magendanz said:
That *should* work then.
Just hold the reset switch in for about 20 seconds while connecting power.
Fastboot mode is more of a challenge on the GT-King, since it can't get enough power from the USB cable by itself. You've got to hold the reset switch while simultaneously connecting both power and the USB cable to the back port.
Click to expand...
Click to collapse
Ok thank you, I tryed recovery mode.. still stuck in bootloop, I ordered a usb cable from gearbest so I will try fastboot wen mail knocks
Thank You TWRP work well
Magisk installation
And what to do to install Magisk correctly. The root is already on the Android 9 device. Unfortunately, the Magisk installation by TWRP has failed so far. Have any ideas? (applies to device and Amlogic S905X2 HK1 Play)
Can this be used on the Ugoos AM6 pro 4 gb / 32 gb s922x?
I guess so?
Duvel999 said:
Can this be used on the Ugoos AM6 pro 4 gb / 32 gb s922x?
Click to expand...
Click to collapse
My understanding is that Ugoos doesn't use the platform keys, and so the .zip file won't work with the OEM stock recovery. You should be able to flash the .img file, though, from TWRP or dd with root. (Yes, I know that's a bit of a chicken-or-egg scenario, so you might need to use Amlogic's USB Burning Tool or update.exe.) Also, look to see if they've implemented AVB 2.0, which can also be a PITA to work around.
Hi
I've got my eyes on a Beelink GT king Pro. Does this work with a s922x-h board @Magendanz ?
MAMATDZ said:
I've got my eyes on a Beelink GT king Pro. Does this work with a s922x-h board @Magendanz ?
Click to expand...
Click to collapse
I'd be surprised if it didn't. It's based on the same reference board as the GT King.
Ok great !
Thanks for the quick answer ^^
have someone a way to put TWRP on Amlogic S905X3?
Hi.
Can this be used on the S905X3? (Wechip v9 4GB/32GB)
Hello. When I try "Apply update from EXT", I got:
Code:
Found: Amlogic/p281:8.10/OPM1.171019.011/root:userdebug/test-keys
E3003: This update package is intended only for Android Pie builds (SDK 28)
Does it mean I cannot install it in Oreo Android?
romkeris said:
Hello. When I try "Apply update from EXT", I got:
Code:
Found: Amlogic/p281:8.10/OPM1.171019.011/root:userdebug/test-keys
E3003: This update package is intended only for Android Pie builds (SDK 28)
Does it mean I cannot install it in Oreo Android?
Click to expand...
Click to collapse
Yes that is what it means, I think his REF to TWRP-9.0 pretty much explains its for android 9 aka Pie only.
But there are many other recoverys that do work for Oreo...