I have rooted my Z2 Vibe using towelroot but I cannot install the newest OTA now. Is there a way around?
I think it's because of the Build.prop file can someone attach the stock build.prop file of the K920?
Thank you
Same issue, root with towelroot and now cannot update OTA
FiremakerP said:
I have rooted my Z2 Vibe using towelroot but I cannot install the newest OTA now. Is there a way around?
Click to expand...
Click to collapse
I have the same issue with this..
Allready root with towelroot and now cannot update OTA
Hoping for some resolution from anyone..
:angel::good:
Full ROM i Found in needrom
FiremakerP said:
I think it's because of the Build.prop file can someone attach the stock build.prop file of the K920?
Thank you
Click to expand...
Click to collapse
Now i still try to download the fullROM from needrom.com, here's the link
needrom.com/download/lenovo-k920/
I'm going to try to flash a full rom and then if success with the flashing, i will then try to update OTA
A bit risky but i think thats the only solution i found for now..
Maybe this can give a refreshment since there's no answer yet..
even i have rooted my mobile with towel root but i was able to install the update successfully.
Root and Succes Updating?
svvv said:
even i have rooted my mobile with towel root but i was able to install the update successfully.
Click to expand...
Click to collapse
Do you have ROW version? And is there any clue why some device can not be update?
I've even try a Factory Reset before updating, and yet still not succeeded..
I have install some root app like, titanium, and viper4android, maybe some of my root application cause the failure..
As i know that viper4android is adding some features in system during driver instalation..
Can you list your root application that you've installed, so that i can predict which app that might cause my updating failure..
Thanks before for sharing with us..
Hey gan rosennisha...check this link ROM
maybe you're looking for....pass archieve : bbs.lenovomobile.com
#dirimu meninggalkan OF5M
rosennisha said:
Do you have ROW version? And is there any clue why some device can not be update?
I've even try a Factory Reset before updating, and yet still not succeeded..
I have install some root app like, titanium, and viper4android, maybe some of my root application cause the failure..
As i know that viper4android is adding some features in system during driver instalation..
Can you list your root application that you've installed, so that i can predict which app that might cause my updating failure..
Thanks before for sharing with us..
Click to expand...
Click to collapse
i have titanium,, greenify, setcpu ,smanager,xposed installer,adaway, supersu, root explorer
Did you try unrooting te device and update?
The problem is with the build.prop file.
The hash of the file is beeing compared while flashing the update. There is a new update S141_150109
Flash the full rom wipes everything.
You can update OTA without problems if the build.prop is untouched which in my case isn't because I changed the locale and did not backup the file.
Please someone upload the original file.
Thank you
Made it!
Ok,
I made it. I found out why the updater won't update. I will upload a TWRP flashable zip.
This is an update from S139 to S141_150109 just flash though TWRP.
update.zip file for update
How do i install? Thanks!
BoletRZ hello OF5M
BoletRZ said:
Hey gan rosennisha...check this link ROM
maybe you're looking for....pass archieve : bbs.lenovomobile.com
#dirimu meninggalkan OF5M
Click to expand...
Click to collapse
Dear BoletRZ,
I allready have that ROM but i cannot install it with the flashtool.. Not detected in my PC, even with several driver still not working.. I Think we need someone who allready success installing that ROM to share the step by step tutorial..
k920 OTA issue
I am in the caribbean far from everyone and my k920 works well. The phone I bought came rooted and so banking apps don't work and also ota does not seem to work . can anyone assist me in fixing this issue ?
FiremakerP said:
Ok,
I made it. I found out why the updater won't update. I will upload a TWRP flashable zip.
This is an update from S139 to S141_150109 just flash though TWRP.
Click to expand...
Click to collapse
the link seems to be dead. can you please upload a new link. i've been trying to update my phone for about a month now
Dear FiremakerP,
can you upload again the update.zip file? The link is dead and the inability to update is driving me nuts!
Thanks a lot in advance!!
There you go:
http://www.megafileupload.com/en/file/608434/update-1--zip.html
please use at own risk! This is not for the chinese versions intended.
FiremakerP said:
Ok,
I made it. I found out why the updater won't update. I will upload a TWRP flashable zip.
This is an update from S139 to S141_150109 just flash though TWRP.
update.zip file for update
Click to expand...
Click to collapse
I am rooted, but on stock lenovo recovery, and still have problem to update from 141 to 143.
I try to unroot with supersu, but no luck. I dont wont to install fresh stock rom because it will wipe data. You mention something with build.prop, is there the problem?Can you please help me?
Thanks
Related
Finaly after a lot of trail and error I succeeded to keep root.
All the info in my post is scattered trough this forum, I'm only putting it in one place. All the credits and thanks to the guys who made this possible.
ONLY ON STOCK NO MODIFIED KERNEL OR RECOVERY
Use flashtool to flash 14.1.B.1.532,
Code:
repository by hamdogg:
[URL]http://forum.xda-developers.com/showthread.php?t=2453921[/URL]
Flashtool download and guide by krabappel 2548:
[URL]http://forum.xda-developers.com/showthread.php?t=2428319[/URL]
Use vroot to root the 14.1.B.1.532 firmware
Code:
vroot download and guide by bASKOU:
[URL]http://forum.xda-developers.com/showpost.php?p=45634432&postcount=3[/URL]
Set supersu to survive OTA
Code:
[COLOR="Red"]Install Voodoo OTA RootKeeper: [/COLOR]
[URL]https://play.google.com/store/apps/details?id=org.projectvoodoo.otarootkeeper[/URL]
Backup "su" with Voodoo OTA RootKeeper
Update the build.prop with German CDA Code
Code:
Guide by bASKOU:
[URL]http://forum.xda-developers.com/showpost.php?p=45634453&postcount=5[/URL]
German CDA code: C6833_1275-8026
ALSO CHANGE "ro.somc.customerid" SET IT TO 436
ALSO CHANGE "ro.semc.version.cust_revision=" SET IT TO R11A
Reboot your device
Check voodoo if backup is still present
If present, go to software update to install OTA.
When followed this step by step you're on the new firmware with root.
And as usual, everything at your own risk.
Thanks. It's nice with a complete rooting tutorial with links in one place One question though; do we lose everything when we're downgrading to .532?
i don't get it why do i need to change my cda to install OTA when i receive for my own cda country.
LordManhattan said:
Thanks. It's nice with a complete rooting tutorial with links in one place One question though; do we lose everything when we're downgrading to .532?
Click to expand...
Click to collapse
Yes,
My documents and photos are on a sdcard, with some back up of apps. When google acount is created all apps are downloaded automatically, so i don't bother loosing...
hykhleif said:
i don't get it why do i need to change my cda to install OTA when i receive for my own cda country.
Click to expand...
Click to collapse
Off course you can use in this case your own CDA.
(I tried to write it in such a way that somebody with minor knowledge is able to do this faultless.)
hykhleif said:
i don't get it why do i need to change my cda to install OTA when i receive for my own cda country.
Click to expand...
Click to collapse
Well, it's clearly not necessary to change your CDA if you've already received the OTA.
herogjan said:
Yes,
My documents and photos are on a sdcard, with some back up of apps. When google acount is created all apps are downloaded automatically, so i don't bother loosing...
Click to expand...
Click to collapse
Alright. I don't care if i lose stuff. I got it all "up in the cloud", so no biggie.
Alright, all i have left is to update to 257 again, but i only have 33% battery left and it's not possible to do it unless i have at least 50%. Just typical Everything else went smooth, and i didn't have any issues
Edit: I'm done updating, and i got root
Edit 2: Hah! I tried using Sony's own backup app before downgrading and everything, feeling that the backup wouldn't be there after the full wipe, but it is indeed there and i have some game saves and stuff there! Awesome!
Germany is using C6833. Is it compatible with C6802?
Noob question: can I flash the C6833 FTF ver 532 on my C6802? I can not find the FTF for 532 Vietnam version, the 510 VN got bootloop and the Generic TW have many Chinese software that I don't like
maquan said:
Germany is using C6833. Is it compatible with C6802?
Noob question: can I flash the C6833 FTF ver 532 on my C6802? I can not find the FTF for 532 Vietnam version, the 510 VN got bootloop and the Generic TW have many Chinese software that I don't like
Click to expand...
Click to collapse
I don't know, I've C6833. Be adventurous When it's not working correctly you can always flash back. In the generic TW version you can always delete the chinese software, one of the pros of root
Can voodoo keep root after update with Desktop PC Companion?
Because, my phone "Update Center" say "Computer required" to update to 2.257.
Thanks.
Johnnynho said:
Can voodoo keep root after update with Desktop PC Companion?
Because, my phone "Update Center" say "Computer required" to update to 2.257.
Thanks.
Click to expand...
Click to collapse
No.
Its called OTA root keeper for a reason...
thanks for posting these steps in a simple straighforward way! i did them with no issue whatsoever, and have root on .257. i have a 6802 and used the .532 for 6802 from Hamdogg's thread, and i didn't even have to mess with CDA/build.prop... the OTA was already there, and installed without issue.
one question: do i need the SuperSU from the market, as described in the Vroot thread, or did i not need to download that, since there is already a Superuser installed to /system/app?
lmemma16 said:
thanks for posting these steps in a simple straighforward way! i did them with no issue whatsoever, and have root on .257. i have a 6802 and used the .532 for 6802 from Hamdogg's thread, and i didn't even have to mess with CDA/build.prop... the OTA was already there, and installed without issue.
one question: do i need the SuperSU from the market, as described in the Vroot thread, or did i not need to download that, since there is already a Superuser installed to /system/app?
Click to expand...
Click to collapse
You don't need SuperSU, but it's a trusted app that works great. The chinese root app? Not so much.
LordManhattan said:
You don't need SuperSU, but it's a trusted app that works great. The chinese root app? Not so much.
Click to expand...
Click to collapse
ahh ok. when i had them both installed, it seemed to default to the Chinese one. i deleted the chinese one from /system/app and it seemed to mess up my root... so i just got done doing it over again, lol.
right now i have just the chinese one but perhaps I'll install SuperSU as well. i did get an error when opening an app called Kinguser, but otherwise root explorer and titanium have worked fine. thanks
Johnnynho said:
Can voodoo keep root after update with Desktop PC Companion?
Because, my phone "Update Center" say "Computer required" to update to 2.257.
Thanks.
Click to expand...
Click to collapse
No, hence OTA root keeper
Sent from my C6833 using XDA Premium 4 mobile app
lmemma16 said:
ahh ok. when i had them both installed, it seemed to default to the Chinese one. i deleted the chinese one from /system/app and it seemed to mess up my root... so i just got done doing it over again, lol.
right now i have just the chinese one but perhaps I'll install SuperSU as well. i did get an error when opening an app called Kinguser, but otherwise root explorer and titanium have worked fine. thanks
Click to expand...
Click to collapse
SuperSu has a feature to remove previous installations from other superuser apps. This works great, and also fixes the binary.
herogjan said:
SuperSu has a feature to remove previous installations from other superuser apps. This works great, and also fixes the binary.
Click to expand...
Click to collapse
ah ok, which feature is this? the only one like this i could find uninstalled SuperSU itself. is it a pro feature?
herogjan said:
Finaly after a lot of trail and error I succeeded to keep root.
All the info in my post is scattered trough this forum, I'm only putting it in one place. All the credits and thanks to the guys who made this possible.
Use flashtool to flash 14.1.B.1.532,
Code:
repository by hamdogg:
[URL="http://forum.xda-developers.com/showthread.php?t=2453921"]http://forum.xda-developers.com/showthread.php?t=2453921[/URL]
Flashtool download and guide by krabappel 2548:
[URL="http://forum.xda-developers.com/showthread.php?t=2428319"]http://forum.xda-developers.com/showthread.php?t=2428319[/URL]
Use vroot to root the 14.1.B.1.532 firmware
Code:
vroot download and guide by bASKOU:
[URL="http://forum.xda-developers.com/showpost.php?p=45634432&postcount=3"]http://forum.xda-developers.com/showpost.php?p=45634432&postcount=3[/URL]
Set supersu to survive OTA
Code:
[COLOR="Red"]Install Voodoo OTA RootKeeper: [/COLOR]
[URL="https://play.google.com/store/apps/details?id=org.projectvoodoo.otarootkeeper"]https://play.google.com/store/apps/details?id=org.projectvoodoo.otarootkeeper[/URL]
Backup "su" with Voodoo OTA RootKeeper
Update the build.prop with German CDA Code
Code:
Guide by bASKOU:
[URL="http://forum.xda-developers.com/showpost.php?p=45634453&postcount=5"]http://forum.xda-developers.com/showpost.php?p=45634453&postcount=5[/URL]
German CDA code: C6833_1275-8026
ALSO CHANGE "ro.somc.customerid" SET IT TO 436
Reboot your device
Check voodoo if backup is still present
If present, go to software update to install OTA.
When followed this step by step you're on the new firmware with root.
And as usual, everything at your own risk.
Click to expand...
Click to collapse
Mine was originally 532 rooted with vRoot, followed the above steps to replace SuperSU and change CDA (1275-9413 >> 1275-8026, R8A >> R11A, 442 >> 436), , but I'm not receiving OTA updates, PCC does have the .257 updates though.... any clue??
lmemma16 said:
ah ok, which feature is this? the only one like this i could find uninstalled SuperSU itself. is it a pro feature?
Click to expand...
Click to collapse
No, Just standaard version. Look for reinstall, even doing this it should prompt you.
Sent from my C6833 using XDA Premium HD app
ycneosg said:
Mine was originally 532 rooted with vRoot, followed the above steps to replace SuperSU and change CDA (1275-9413 >> 1275-8026, R8A >> R11A, 442 >> 436), , but I'm not receiving OTA updates, PCC does have the .257 updates though.... any clue??
Click to expand...
Click to collapse
There are 3 places where you change CDA, maybe you missed one? Did it save correctly?
Sent from my C6833 using XDA Premium HD app
I am rooted when i update my 4.1 to 4.3 after 4.3 update is done super su tells "There is no Su binary installed, and SuperSU cannot install it. This is a problem!, If you just upgraded to android 4.3 you need to manually re root consult the relevant forums for your device!.
You can try DooMLords method again and see what happens? I don't know if that'll make you have to flash a whole new firmware again though
Derkz said:
You can try DooMLords method again and see what happens? I don't know if that'll make you have to flash a whole new firmware again though
Click to expand...
Click to collapse
does not work don't try it or u lose all your data .
jboukaram said:
does not work don't try it or u lose all your data .
Click to expand...
Click to collapse
thanks for the advice. well we just hope that DooMLOrd will work on our new root.
Hi,
is a root apeared fot the new firmware?
regards,
elhamd
elhamd said:
Hi,
is a root apeared fot the new firmware?
regards,
elhamd
Click to expand...
Click to collapse
Right here, just test stage though
http://forum.xda-developers.com/showthread.php?p=50289829
Hello all my friends. I have some trouble yet again with our lovely p780. I updated to the Vibe ui 2.0 stable release. It's great but I can't find a custom recovery for it and the partition is frustrating me. I have an 8 gb device and the update divided the partition in a way that takes a large potion of my data and locks it away for the system data. And I am stuck on the Rom. I have been trying to flash back to ROW all day. Every time I try to flash back to ROW the spflash tool gives errors about missing documents. Any ideas? If I'm stuck on this ok but could someone help me fix the partition and find a custom recovery that works?
I found a custom recovery that works. I just used the same as the chinese twrp that works on all the older ones.
Supermatt01 said:
Hello all my friends. I have some trouble yet again with our lovely p780. I updated to the Vibe ui 2.0 stable release. It's great but I can't find a custom recovery for it and the partition is frustrating me. I have an 8 gb device and the update divided the partition in a way that takes a large potion of my data and locks it away for the system data. And I am stuck on the Rom. I have been trying to flash back to ROW all day. Every time I try to flash back to ROW the spflash tool gives errors about missing documents. Any ideas? If I'm stuck on this ok but could someone help me fix the partition and find a custom recovery that works?
I found a custom recovery that works. I just used the same as the chinese twrp that works on all the older ones.
Click to expand...
Click to collapse
Hi. What errors... Could you elaborate please?
What ROM did you tried to flash?
Sent from my Lenovo P780
stympy said:
Hi. What errors... Could you elaborate please?
What ROM did you tried to flash?
Sent from my Lenovo P780
Click to expand...
Click to collapse
Im getting an error that says PMT changed for rom it must be downloaded.
I have no clue what that is or where to find it and it says this for every rom other than s135.. I'm trying to flash back to s124 so I can go up to the newer s226. I have tried update only, firmware upgrade, with and without preload files. I have the drivers installed.
Thanks for trying to help me out stympy.
Supermatt01 said:
Im getting an error that says PMT changed for rom it must be downloaded.
I have no clue what that is or where to find it and it says this for every rom other than s135.. I'm trying to flash back to s124 so I can go up to the newer s226. I have tried update only, firmware upgrade, with and without preload files. I have the drivers installed.
Thanks for trying to help me out stympy.
Click to expand...
Click to collapse
Here is what you have to do: Try to use only Flash Tool 3 not 5.
1. Download your ROM, must be 124ROW with Flash Tool
2. Download Life ROM for your phone 4 GB or 8GB. I do not know what type of ROM you have.
3. First try to flash Life
4. If you manage to flash Life boot once and then power off your phone and try to flash 124 ROW ROM.
5. Tell me if something goes wrong !
stympy said:
Here is what you have to do: Try to use only Flash Tool 3 not 5.
1. Download your ROM, must be 124ROW with Flash Tool
2. Download Life ROM for your phone 4 GB or 8GB. I do not know what type of ROM you have.
3. First try to flash Life
4. If you manage to flash Life boot once and then power off your phone and try to flash 124 ROW ROM.
5. Tell me if something goes wrong !
Click to expand...
Click to collapse
Ok bro. I'll give that a try. Life rom, which version? is the 8gb version on your post Chinese?
Supermatt01 said:
Ok bro. I'll give that a try. Life rom, which version? is the 8gb version on your post Chinese?
Click to expand...
Click to collapse
Life that i post are based on ROW version.
Do not change anything !
stympy said:
Life that i post are based on ROW version.
Do not change anything !
Click to expand...
Click to collapse
Thanks bro, I got it back on to s124. I will post an update if I can fix it up on the newer s226.
Supermatt01 said:
Thanks bro, I got it back on to s124. I will post an update if I can fix it up on the newer s226.
Click to expand...
Click to collapse
You are wellcome !
stympy said:
You are wellcome !
Click to expand...
Click to collapse
Worked great. I'm now using 226. The ram is a bit better and it's a bit smoother than 222.
Stuck on kit kat 4.4.2 after updata please help I cant flash or root or anything
Supermatt01 said:
Worked great. I'm now using 226. The ram is a bit better and it's a bit smoother than 222.
Click to expand...
Click to collapse
Hi everyone!
I really appreciate any help.
I did a update to 4.4.2 my phone wasn't root. The lenovo app store in in chapanese or chinese and almost all apps too
I trued flash tool 2.1 nothing happen. Try cwm 4.0.4 says is not compatible.
Super su give me a error
Really hope someone out there could get me out of this agony
Kind regards
Mc
presentesb said:
Hi everyone!
I really appreciate any help.
I did a update to 4.4.2 my phone wasn't root. The lenovo app store in in chapanese or chinese and almost all apps too
I trued flash tool 2.1 nothing happen. Try cwm 4.0.4 says is not compatible.
Super su give me a error
Really hope someone out there could get me out of this agony
Kind regards
Mc
Click to expand...
Click to collapse
Hi. What do you want to do? Root, flash custom recovery, flash another firmware or just clean your current ROM out of chinese apps?
Sent from my SMT TAB 704DC using XDA Free mobile app
stympy said:
Hi. What do you want to do? Root, flash custom recovery, flash another firmware or just clean your current ROM out of chinese apps?
Sent from my SMT TAB 704DC using XDA Free mobile app
Click to expand...
Click to collapse
I would like to be able to have a rom at least with google play or could be lenovo but total in english.
at moment i am using a web site where I give the link on googleplay than i get the downloald of apk file
but some time it doesnt work.
Thanks
ps: i tryed put the image here of sistem 4.4.2 vibe 2.0
presentesb said:
I would like to be able to have a rom at least with google play or could be lenovo but total in english.
at moment i am using a web site where I give the link on googleplay than i get the downloald of apk file
but some time it doesnt work.
Thanks
ps: i tryed put the image here of sistem 4.4.2 vibe 2.0
Click to expand...
Click to collapse
Hi. Go here
Flash the rom you have. 8Gb or 4Gb.
After flashing go to here and root your phone.
Good Luck.
stympy said:
Hi. Go here
Flash the rom you have. 8Gb or 4Gb.
After flashing go to here and root your phone.
Good Luck.
Click to expand...
Click to collapse
thanks for answer me.
on flash tool where the bin file and scart file have to be from?
shoul i use flash tool 2.2 or 5.0?
I already tryed this post on link, but will try again maybe i am getting the wrong file.
where i did use flash tool nothing happend really will do again anyway
Appreciate your help and time
Mc
presentesb said:
thanks for answer me.
on flash tool where the bin file and scart file have to be from?
shoul i use flash tool 2.2 or 5.0?
I already tryed this post on link, but will try again maybe i am getting the wrong file.
where i did use flash tool nothing happend really will do again anyway
Appreciate your help and time
Mc
Click to expand...
Click to collapse
If nothing is going on with the scatter file try those scatter files from here.
stympy said:
If nothing is going on with the scatter file try those scatter files from here.
Click to expand...
Click to collapse
I try with this scatter, Here is the imagem from the scheen that I got. No success
I saw some post here the phone stop work after flash. I just would like to say my room become in chinese after upgrade
to android 4.4.2 and I cant use google play or install apps.
Thanks again
presentesb said:
I try with this scatter, Here is the imagem from the scheen that I got. No success
I saw some post here the phone stop work after flash. I just would like to say my room become in chinese after upgrade
to android 4.4.2 and I cant use google play or install apps.
Thanks again
Click to expand...
Click to collapse
Hi. You must tell me what rom do you have: Chinese or ROW(Rest Of the World)!
stympy said:
Hi. You must tell me what rom do you have: Chinese or ROW(Rest Of the World)!
Click to expand...
Click to collapse
I bought and it was in english 4.2 android.
So I plug on computer (lenovo Smart Assistant) so its found a update.
Than I got 4.4.2 android but it comes in chinese.
Even I chance the language on setting the most of app are in chinese.
Now it is a update chinese room I guess. (I have no success to root it)
Manual and box in chinese
Data on box 06/2014
Here is a screemshot after the update
Kind regards
Mc
presentesb said:
I bought and it was in english 4.2 android.
So I plug on computer (lenovo Smart Assistant) so its found a update.
Than I got 4.4.2 android but it comes in chinese.
Even I chance the language on setting the most of app are in chinese.
Now it is a update chinese room I guess. (I have no success to root it)
Manual and box in chinese
Data on box 06/2014
Here is a screemshot after the update
Kind regards
Mc
Click to expand...
Click to collapse
Hi. What you have here is the latest Chinese software. You cannot root with my tutorial. There are other software to do that.
This is what i recomend: flash a ROW ROM. Stock ROW ROM you will find in the development section. After flash do an OTA update. After update my tutorial for rooting will work.
Sent from my SMT TAB 704DC using XDA Free mobile app
stympy said:
Hi. What you have here is the latest Chinese software. You cannot root with my tutorial. There are other software to do that.
This is what i recomend: flash a ROW ROM. Stock ROW ROM you will find in the development section. After flash do an OTA update. After update my tutorial for rooting will work.
Sent from my SMT TAB 704DC using XDA Free mobile app
Click to expand...
Click to collapse
I am just afraid to get the wrong rom and bricky it, could you say if the rom on this link is ok
http://forum.xda-developers.com/lenovo-p780/development/rom-lenovo-p780-pre-rooted-official-t2553725
Below is the image with two arrow, wish one is better
Thanks
Mc
Hi Guys!
Is there any soul who can help me out?
I have a SGP321 Tab Z version with stock 4.4 on it, and rooted with towelroot (i guess this is the name!)
Every single update i've done since initial version 4.1 had been without any problems and all by OTA.
Now, after downloading the latest version, after click install button, i get a message box telling me that the tablet will restart and will take some 41 minutes to do the job. OK then, it reboots, but after one or two minutes max, it reboots again and nothing done. Then on the notification bar i get a message saying that the update failed and i should do it again.
Well Mates, after 5 tries i gave up?
Maybe someone have had a problem like this one??
Might have something to do with the root method?? I really can't figure out....
Thanks for your kind help in advance.
Crake said:
Might have something to do with the root method?? I really can't figure out....
Thanks for your kind help in advance.
Click to expand...
Click to collapse
To tell long story short, it is because you are rooted. Before applying OTA device checks system files for modifications and stops install if it finds one. Root as you know is a modification.
So, any suggestion?
What should i do?
Thanks, again
Crake said:
So, any suggestion?
What should i do?
Thanks, again
Click to expand...
Click to collapse
So if you're on a rooted KitKat now it's easier for to install recovery and flash prerooted 5.0.2 firmware straightforward.
Rootk1t said:
So if you're on a rooted KitKat now it's easier for to install recovery and flash prerooted 5.0.2 firmware straightforward.
Click to expand...
Click to collapse
Sorry to bother again, but on the second link you provided, something have frightened me:
"...Unfortunately, XZDualRecovery isn't working for TabZ with Lollipop at the moment.
That's why it is not included..."
So, will it work?
Crake said:
Sorry to bother again, but on the second link you provided, something have frightened me:
"...Unfortunately, XZDualRecovery isn't working for TabZ with Lollipop at the moment.
That's why it is not included..."
So, will it work?
Click to expand...
Click to collapse
recovery is working good now.
Hi guys, I'm having hard times trying to root an already encrypted Honor 7.
What I tried:
-SuperSU.zip: the best effort was to corrupt the boot.img
-Kingroot: useless
I need your help.
Thanks
Use SuperSU v2.62 for root, link below. You can update it to the latest version from Playstore after rooting. (Worked for me, B380 eu firmware.)
https://download.chainfire.eu/751/SuperSU/
antzti said:
Use SuperSU v2.62 for root, link below. You can update it to the latest version from Playstore after rooting. (Worked for me, B380 eu firmware.)
https://download.chainfire.eu/751/SuperSU/
Click to expand...
Click to collapse
I think I love you!
Thanks mate
It worked also with stable 2.65.
I didn't tought to go that back
Do you know which is the last binary supported?