edit: My mistake - After all my tablet is the ME181CX version, i was almost certain it was the C. Aparently this one can't be rooted yet.
Hello,
I recently bought this tablet, and started reading up on how to root it.
I have come across this rootzenphone apk, and aparently the latest 1.4.6.4r version should support this tablet. Nevertheless, i am having the problem of it just leaving the tablet in demo mode, and the rooting saying "failed". I have restored to factory settings, and tried to root again, to the same results.
Build number : WW-3.1.23.172 -> i recall reading something about only "ww-xxxx" models being supported, so i guess mine is one of those.
I am quite new to android, so i may not be giving some needed info :x
Anyway, any help would be awesome.
Related
Hello Xda community,
Alright after exhausting all other options i have decided to turn to our community in hopes that i can come to some sort of resolution for this matter. Okay i own a Sophix Tab-840g past warranty my problem is my software was causing freeze and reboots i left it that way for a while because it wasn't bothering me. So i waited long enough for them to make a new firmware and i upgraded, however upon doing so i was not able to use the touchscreen. Also, i have no back up...... was a bad move in retrospect. I did some research and found that that the freezing was due to the actual firmware and many people had tried to update running into the same situation where the touchscreen stopped working.
The only difference between when i did it and when they did it is the company had there older firmware available still. That is no longer that case they only have the new firmware and after calling they no longer have old software available. Other people reverted back and atleast there tablet worked, however I CANNOT get the old firmware ANYWHERE........in there guide they talk of the use of update "update-tab840-v02-20130315.img" when using there batch program. The only firmware available is the new one “upgrade-tab840-v03-20130607" i'm looking for the older update "update-tab840-v02-20130315.img" to fix my tablet or a way to fix this touchscreen hard reset is out of the option i have already done this method a couple times, i tried installing from sd, and from the computer all with the same error. Thank you so much for reading this and also for any help i procure. I will be uploading the version of my firmware i have no and the old one if i get it so this can the fix for this dreaded problem with so few forums talking of a fix.
Thank you,
Captainsploof
P.S. having trouble uploading firmware at this point keeps saying page unavailable during upload 8/18/2014
Hi Guys, first of all thank you in advance for any answer you could give! it will be much appreciated!
Now, before anything I know there should be hundreds of posts about this issue but I was unable to find one that could apply to my scenario. But if you know any post that could be what I'm searching please just point me in the right direction :good:
Now, here is the problem:
We bought this cheap chinese tablet with andrioid 4.2.2 for my mother and it seemed to work pretty slow and some apps where not working correctly, there where a lot of adds even when she was not on an application, they just popped out on the main menu screen, and, when trying to register Instagram it displayed a message stating that there where too many users registered in the device. I tried to root the tablet because found that it could be because some temp files but it showed that it was already rooted... So my guess is that whoever installed the OS, did it with a "hacked" version of it.
Up to this point I have tried to do a hard reset but the issue is still going because it is still the hacked version of the OS, and I havent been able to find a way to completely wipe out the OS and install a fresh new version of Jelly bean 4.2.2
Can it be done with the device conected to a PC? or can it be done with a flashed memory card?
I know finding the firmware for a chinese tablet will be a major pain in the ass but, is there a version that could work for different models? (this is a Mobix MBX7 Plus, found the website mobix.com.ve but there is just no helpful info whatsoever)
Anyway, I hope you guys can help. Sorry for the somewhat long post
Again, thank you!!
Update!!!
I found info that could lead to the correct firmware, the CPU is an Allwinner Cortex A20, but Im still not sure if this format process is just like a PC, where you need drivers or everything is on the OS
Ive got a brand new phone I wanted to get rid of the bloatware from my carrier. So I rooted it via kingroot, installed Titanium Backup and went to town. Then an OTA update came in and I accepted it, it seems that the phone battery died during the update installation.
Now I get a "no command" message with the android on its back. All the googling Ive done points me to do a hard factory reset via recovery, which I do but I still keep getting the same message.
Is there some software specifically for LGs that I could unbrick it with? I own several Nexus devices and a OnePlus and wugfresh toolkit has helped tons.
To add to the problem, I cant find much about it. Its a Mexican model called LG Zone or X180g. From the Googling ive done, Ive come to the conclusion that is called LG Ray in other markets.
I really appreciate your help
http://lg-firmware-rom.com/
You can try to see if they have it. I don't think there is anywhere free to get the firmware. But yea, that was a big pair of screw ups between taking the OTA after rooting and having removed system apps as well as letting it die while trying to update. That's bad on any type of device. Since it is a MTK device, you'll have to use a version of the Flash Tool as it is different than most LGs, which use Snapdragon processors.
When I bought my phone I allowed a friend to do the initial setup on it. Well he ended up keeping it for over 2 hours, kinda fishy huh? Anyway, when I finally got the phone back, I done my usual scan of looking thru my apps and such. The first big problem I found was that my device is not verified on Google play... Second problem is my android security patch level is from 2016 and not currently up to date, in fact none of the firmware or anything under about phone is up to date. Keep in mind this is brand new phone. Any suggestions on how to fix this problem? Phone was so called rooted using kingroot right after he gave it back to me. Kingroot and lucky patcher are both installed on this device. Any help would be greatly appreciated.
I got one of these Diamond Resorts tablets given to me brand new in the box. It runs really slow and has an old OS 4.4.2 I believe. I rooted the tablet but now it appears I need a ROM tailored specifically to this device in order to update the OS? New to all of this so unsure of the proper vernacular. There is no option to update the tablet automatically, that functionality appears to be disabled even with me rooting the tablet via Kingo Root. The tablet is an Azpen with the model number a1045dri. I'm trying to upgrade the OS in the hopes the tablet will not run so slow and be so laggy. Any help is appreciated. Thanks
Hi
I also have one of these tablets.
Azpen seems to have already stopped supporting them back in 2017.
I got an update to 4.4.3 in 2017.
I wanted to try to use it again.
anychance you got any luck with updating yours?
I attempted to update & now mine only loads to diamond logo.
Followed = https://www.xda-developers.com/how-to-install-android-12/