I made a VPN connection on my hermes(with the same settings that I used on my PC). but everytime i tried to connect to it over wifi it gives me the username and password error.
VPN settings :
IP : 209.51.194.210
VPN type : PPTP
Can anyone help me to fix this problem?
I can't give you an answer to your problem but I'd probably not post you IP and VPN type on the internet!!!
as long as i dont post my username and password, I'll be safe.
Like in topic... How to ? i make my wlan card to Ad-hoc but my Ace don't see this
plbubu said:
Like in topic... How to ? i make my wlan card to Ad-hoc but my Ace don't see this
Click to expand...
Click to collapse
If you're using Windows 7, the easiest way is Connectify..
windows xp unfortunetly
AFAIK SGA cannot connect to an Ad Hoc connection. I already asked this one in the development section. I think most android phones with a stock firmware have the same problem . Any Ad hoc connection is hidden. The WPA supplicant needs to be edited to show this type of connection which is not yet available here.
plbubu said:
windows xp unfortunetly
Click to expand...
Click to collapse
It's actually for all windows. I cant test it on XP but it definetely work on Windows 7.
http://www.connectify.me/download/windows.html
roninxt said:
AFAIK SGA cannot connect to an Ad Hoc connection. I already asked this one in the development section. I think most android phones with a stock firmware have the same problem . Any Ad hoc connection is hidden. The WPA supplicant needs to be edited to show this type of connection which is not yet available here.
Click to expand...
Click to collapse
For internet via wifi, I can do this since I updated to KPN stock.
if you can... please do this
There is a file named wpa_supplicant.conf in /etc. May be the solution is there. I look the the file but i don't have any knowledge about this.
Lines: 87-106:
# AP scanning/selection
# By default, wpa_supplicant requests driver to perform AP scanning and then
# uses the scan results to select a suitable AP. Another alternative is to
# allow the driver to take care of AP scanning and selection and use
# wpa_supplicant just to process EAPOL frames based on IEEE 802.11 association
# information from the driver.
# 1: wpa_supplicant initiates scanning and AP selection
# 0: driver takes care of scanning, AP selection, and IEEE 802.11 association
# parameters (e.g., WPA IE generation); this mode can also be used with
# non-WPA drivers when using IEEE 802.1X mode; do not try to associate with
# APs (i.e., external program needs to control association). This mode must
# also be used when using wired Ethernet drivers.
# 2: like 0, but associate with APs using security policy and SSID (but not
# BSSID); this can be used, e.g., with ndiswrapper and NDIS drivers to
# enable operation with hidden SSIDs and optimized roaming; in this mode,
# the network blocks in the configuration file are tried one by one until
# the driver reports successful association; each network block should have
# explicit security policy (i.e., only one option in the lists) for
# key_mgmt, pairwise, group, proto variables
ap_scan=1
Click to expand...
Click to collapse
Maybe when we change:
ap_scan=2
problem can be solved.
I didnt tried it because i dont have a laptop to make adhoc network. Or somebody can find another solution.
i tried using connectify on win 7...it gives me a blue screen
i have a evdo connection on my laptop which i would like to use for my phone too through wifi...
i read somewhere that android doesnt natively enable ad hoc although you can use your mobile as a hot spot, wonder why cant work the other way around.
but yes if anybody knows how to change the code or make it work...pls help
Quite possibly it may not work. There is another thread here on XDA with a hack, although is outdated. May be some workable info there.
Found solution
while trying to find out why there is a blue screen through connectify found something that works for me...Mhotspot
nice software which is clean and easy to install and best of all it works...quite possibly with all android phones
you can get it here www(dot)mhotspot(dot)com
hi can anyone give the proper wpa_supplicant for ad-hoc support please.
i tried wifi adhoc enabler from market but after applying it, whenever it detects adhoc network it detects it like
(*)test network.
when i click on it for connect it replicates its name and the process go on.
hi
i have access to a computer which has wifi modem
i can also login to the modem settings. but in the wireless security, it is showing the wep key with dots. i am unable to find the password. please help me how to find the password
Hi
How do i bypass the need for ip in "allways vpn" mode. I want to use domain not ip (i understand the risk)?