Q&A for [RECOVERY] TWRP recovery installer
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY] TWRP recovery installer. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
K900 TWRP Install
If done all the Steps for installing TWRP.
When I press "Reboot into Recovery" Button, my Phone will do Powercycle. And start normaly.
When I power off my Phone, start again by holding Vol+ Button, I get to Droidboot
if I choose Recovery in Droidboot, i'll get to Android system recovery.
No TRWP at all the time
Same problem
dr.h8ball said:
If done all the Steps for installing TWRP.
When I press "Reboot into Recovery" Button, my Phone will do Powercycle. And start normaly.
When I power off my Phone, start again by holding Vol+ Button, I get to Droidboot
if I choose Recovery in Droidboot, i'll get to Android system recovery.
No TRWP at all the time
Click to expand...
Click to collapse
Hi,
I have same problem. I tried cwm recovery installer .apk, and .inb but I couldnt install twrp or cwm recovery. is there any solution ?
Related
Q&A for [RECOVERY][Condor] CWM 6.0.4.9
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY][Condor] CWM 6.0.4.9. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Dont use TWRP
In TWRP ,
If you have accepted latest OTA system update, your phone may be in infinite boot loop : during normal boot process, it reboots automatically after less than one minute.
This comes from the fact that TWRP doesn't handle properly the upgrade process. To solve the problem, you phone just need to get back the stock recovery to let the upgrade process run. You'll then be able to flash back latest TWRP recovery.
In CWM no such problem
CWM issues and switching to TWRP
Hi,
I have 2 issues with CWM 6.0.5.0 on my xt1019.
1. I cannot create a backup. I get the error: "Error while backing up boot image!"
2. When leaving CWM, I get this message: "Root access possibly lost. Fix?". I tested my root access with Root Checker and it says that root is enabled and fine.
After Googling these errors, it seems like the best solution is to install TWRP.
Question: Can I flash TWRP using CWM? Or, should I go back and flash TWRP with Fastboot?
Thanks.
jbrid said:
Hi,
I have 2 issues with CWM 6.0.5.0 on my xt1019.
1. I cannot create a backup. I get the error: "Error while backing up boot image!"
2. When leaving CWM, I get this message: "Root access possibly lost. Fix?". I tested my root access with Root Checker and it says that root is enabled and fine.
After Googling these errors, it seems like the best solution is to install TWRP.
Question: Can I flash TWRP using CWM? Or, should I go back and flash TWRP with Fastboot?
Thanks.
Click to expand...
Click to collapse
Install TWRP Using TWRP Manager ( Download from Play Store ) :good:
Detailed steps explained in below Thread..
Code:
[URL="http://forum.xda-developers.com/showthread.php?t=2754486"]http://forum.xda-developers.com/showthread.php?t=2754486[/URL]
Thanks for the recovery bro......
---------- Post added at 05:33 AM ---------- Previous post was at 05:13 AM ----------
Recovery is working perfectly
Q&A for [RECOVERY][Galaxy Light T399] TWRP 2.7.1.0 Touch Recovery
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY][Galaxy Light T399] TWRP 2.7.1.0 Touch Recovery. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Galaxy Light - metropcs - latest kernel
Hi,
I've followed the directions in the thread and my phone does not seem to be flashing the recovery. I'm using Odin 3.1 with the recovery file linked in the post. Odin completes and says PASS, but when I reboot the phone into recovery, it still looks like the stock recovery. I go ahead and try to install Chain's SU file from the SD card and I get an error about file or signature verification, then the phone reboots to the home screen and runs as if no recovery/root was ever attempted. I saw another user said the latest kernel was indeed flashable, however my experience so far is to the contrary.
Kernel : 3.4.39-2903595
[email protected] #1
Build number:
KOT49H.T399NUVUANK3
MetroPCS
from [Q&A] [RECOVERY][Galaxy Light T399] TWRP 2.7.1.0 Touch Recovery:
http://forum.xda-developers.com/android/development/recovery-twrp-2-7-1-0-touch-recovery-t2823555
How do I root my phone after I install TWRP from this method?
From [Q&A] [RECOVERY][Galaxy Light T399] TWRP 2.7.1.0 Touch Recovery:
http://forum.xda-developers.com/android/development/recovery-twrp-2-7-1-0-touch-recovery-t2823555
How do I root my phone after I install TWRP from this method?
Q&A for [LOLLIPOP][UNLOCK]Micromax Unite 2 bootloader unlock on Lollipop
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [LOLLIPOP][UNLOCK]Micromax Unite 2 bootloader unlock on Lollipop. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Sudeep Duhoon said:
This is going to be simple and short.
Your are responsible for whatever you do in your life, including following this tutorial.
Things needed.
Fastboot and drivers. (google+xda), try this (untested)
1. Power off.
2. Press volume up+down+power on.
3. Select recovery.
4. Reboot to bootloader.
5. Connect to pc.
6. Open cmd where you have fastboot. (shift+right click, select from context menu)
7. Type fastboot oem unlock.
8. Press volume up button.
9. Once done type fastboot reboot.
10. Now recovery will wipe your data.
11. Phone will reboot. Profit.
Now , wait for recovery and root. Don't ask ETA.
Thank you.
Click to expand...
Click to collapse
Thanks a lot . Worked.
stuck in fastboot
what can i do to unlock bootloader?
i have installed cwm but when i install supersu from sd card it is not showing in my unite 2 ..
help please my phone is stuck at fastboot and nothing is happening when i press volume up button.
bawasingh23 said:
what can i do to unlock bootloader?
i have installed cwm but when i install supersu from sd card it is not showing in my unite 2 ..
help please my phone is stuck at fastboot and nothing is happening when i press volume up button.
Click to expand...
Click to collapse
Go through this thread nicely
http://forum.xda-developers.com/showthread.php?p=59483000
There's the process to root and unlock bootloader.
Also before rooting change from cwm to philz touch recovery. You will get all that in that thread. Go thoroughly.
Before doing that, just do a fresh upgrade.
Good luck! :thumbup:
Does it clear my data
does it will clear my data??????????
plzz ans
Kev Mac said:
does it will clear my data??????????
plzz ans
Click to expand...
Click to collapse
Yes, it will.
Dear sir,i was using Philz recovery and i wanted to flash a new rom so i selected wipe for new rom and after that phone got hard bricked,it goes to costom recovery but do not boot after that,micromax logo appears for one sec and then disappear.Pc is also not detecting the mobile after instalation of drivers.I think i wiped the bootloader or boot image.please sir i request you that you reply for a solution.my mobile is dead for a week.thankyou....
Q&A for [Miui][Rom][Port] Alcatel Pop C2
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Miui][Rom][Port] Alcatel Pop C2. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
kirito9 said:
This thread was made for persons looking for custom roms for the Alcatel Pop C2
I found a custom rom for the Alcatel Pop C3 4033x and this phone has the exact same specs as the Alcatel Pop C2 4032a. This is a guide on how to install the rom and report any bugs you may have with the rom other than the ones that are already there.
NOTE: I DID NOT MAKE THIS ROM I'M JUST SHARING IT HERE. The person who created the rom is from the miui forum and you can visit that forum and thank him here.
DISCLAIMER:I AM NOT RESPONSIBLE FOR ANYTHING THAT HAPPENS TO YOUR DEVICE AFTER FLASHING.
CREDITS: Miui porting team, hansel0517
FEATURES
Rooted
Zipaligned
Weather in English
Language - English, Chinese
HOW TO INSTALL
REQUIREMENTS:
Rooted Phone
ADB Drivers
Custom Recovery
Make a backup first in case anything happens.
Download the rom and gapps from the download section and place it somewhere on your computer.
Install a custom recovery, i would recommend using the Carliv Touch Recovery 2.7 or any recovery that can install zip from sideload. YOU WILL NEED TO HAVE A RECOVERY WITH THIS FEATURE IF YOU DO NOT WANT TO LOSE ANY DATA( INTERNAL STORAGE). ALSO DO NOT INSTALL USING SDCARD EITHER!
Place the rom in the same folder where it is possible to use ADB, what i did was allow ADB to work from anywhere on the PC. You can do that here if you wish.
Go to recovery by either using the button method or use some app to go to recovery. Do a factory reset, wipe cache, wipe dalvik cache.
Go to install zip then install zip from sideload.
Open the command window from the folder where your rom is by pressing shift then right click if you are able to run ADB from anywhere OR doing it the other way open the command window from the folder where the ADB is.
Type in the command window: adb drivers
then adb sideload and the name of the rom
It will start loading and sending the rom to your phone.
Do the same for the gapps.
A trick when at the sideload step, press the first two letters of the rom name and then press tab and it will fill out the rest of the letters.
DOWNLOADSROM
Gapps- Download other google apps from the playstore
SCREENSHOTS- The emergency calls only are there because i did not have a sim in the phone but it can work with a sim :good:
Click to expand...
Click to collapse
Thank you!! Finally a custom rom for this phone :laugh:
you are welcome
did you find any other bugs with this rom?
Q&A for [RECOVERY][CWM][PHILZ][TWRP] G2 Mini D618
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY][CWM][PHILZ][TWRP] G2 Mini D618. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Help with the recovery
Hi! I've just downloaded the Philz.img how can I install the recovery on mi D618?
Kyrat said:
Hi! I've just downloaded the Philz.img how can I install the recovery on mi D618?
Click to expand...
Click to collapse
If (and only if) you unlocked the bootloader, install a flash app, such as Flasify or Rashr, from Play Store and then flash the .img file.
Cafi96 said:
If (and only if) you unlocked the bootloader, install a flash app, such as Flasify or Rashr, from Play Store and then flash the .img file.
Click to expand...
Click to collapse
Hi, thanks for answer me, how can I know if I have the recovery installed?
Kyrat said:
Hi, thanks for answer me, how can I know if I have the recovery installed?
Click to expand...
Click to collapse
Open an adb shell or a terminal emulator on the phone (with root privileges, of course) and write reboot recovery, then enter. Otherwise, you can download Quick Boot from play store and choose the recovery option.
If you see the PhilZ recovery instead of the stock 3e one, you're gone.
If you want to access the recovery when the phone is off, you have to do the factory reset process: keep pressed power and volume down. When you see the LG logo, release the power button (keeping pressed vol down) and then keep it pressed again until you see the factory reset menu. Using volume and power keys, start the reset process and you will redirect to the custom recovery. :good: