In the procees of rooting, I had flashed CWM using Odin using recommened settings and it passed and rebooted to ROM(stock) itself. Then I rebooted to recovery mode but what I could see is the stock system recovery instead of the flashed CWM, and I know it was overwriiten by stock recovery by the system itself. I again did this flashing via ODIN but this time with UNCHECKED AUTO-REBOOT, and maually tried to reboot to recovery with button combinations, but instead rebooted to ROM itself. What should I do now to root my device?
Looking forward for your humble reply.
Thanks in advance ;P
regards,
riocrag
You can't have custom recovery with stock firmware, it will restore stock recovery on each boot.
Root doesn't require custom recovery, go read the sticky threads in general forum, search for cf auto root.
I'm don't want just root, I want to flash ROM also.
boomboomer said:
You can't have custom recovery with stock firmware, it will restore stock recovery on each boot.
Root doesn't require custom recovery, go read the sticky threads in general forum, search for cf auto root.
Click to expand...
Click to collapse
For your information what I want is not just root but want to flash ROMS through recovery. Since the method I used isn't successful, can I flash recovery after going through CF AutoRoot process? If Yes, how to do it bro?
@Sarun said:
For your information what I want is not just root but want to flash ROMS through recovery. Since the method I used isn't successful, can I flash recovery after going through CF AutoRoot process? If Yes, how to do it bro?
Click to expand...
Click to collapse
Root your phone with CF Auto Root
Download and flash a recovery with Rashr (You can donwload it from the PS)
And after this find a rom you want and install it with the recovery BUT always read the section on "How To Install It"
Galaxy S3 International
efeXTREME Lite Rom v5.1
Arter97 Kernel v4.0 beta 3
Finally done,
Read that, read this and all. Especially you boomboomer you have been harsh, I almost spend a whole day on rooting this device that's actually some matter of minutes. First of all let me make you clear that I have gone through each stickies particular to this device and followed the linked tutorials also finally I figured a way out of this stuffs and finally with CWM and ROOT. A little advice from my part, for the sake of getting THANKS just don’t get your head into as many threads as possible. Since I was having deep knowledge about rooting and stuffs (not much about SAMSUNG stuffs), I was able to figure it out. What about if I was a complete noob? Your words should have left me in no hope.
As you leave notes always under your words about what is XDA becoz of noobs,
REMEMBER YOU WERE NOT BORN GEEK
No harsh feelings my friend what you felt by reading this is what I felt when I read yours. Chill bro.
riocrag said:
Read that, read this and all. Especially you boomboomer you have been harsh, I almost spend a whole day on rooting this device that's actually some matter of minutes. First of all let me make you clear that I have gone through each stickies particular to this device and followed the linked tutorials also finally I figured a way out of this stuffs and finally with CWM and ROOT. A little advice from my part, for the sake of getting THANKS just don’t get your head into as many threads as possible. Since I was having deep knowledge about rooting and stuffs (not much about SAMSUNG stuffs), I was able to figure it out. What about if I was a complete noob? Your words should have left me in no hope.
As you leave notes always under your words about what is XDA becoz of noobs,
REMEMBER YOU WERE NOT BORN GEEK
No harsh feelings my friend what you felt by reading this is what I felt when I read yours. Chill bro.
Click to expand...
Click to collapse
"brief" unequals "harsh", that's all there is to it. This kind of talk is exactly what booboomers sig is intended towards. You discourage the people that wanna help. They tell you where you can find the info you need and you argue about semantics. Not everybody has the time to write a nice novel for everybody asking a question that has been aswered before again and again. I for one have a life that's not electronic. Sometimes less is more and in your case "less" was all boomboomer had time for. So please...
Related
Although I've flashed non-phone devices in the past (routers, PAP2, Ipod classic, etc.) This is the first time I'm going to be flashing a SmartPhone that I've ordered which I should be getting very soon.
I ordered a Samsung Galaxy S II and have been crawling the forum trying to learn all I can before I try rooting and unlocking my phone when I get it. But I'm having trouble deciding on a few things.
Hopefully my question can become a guide for other new people who are just starting off like me.
Rooting:
To begin, I'm trying to figure out what's best for rooting.
I've looked at a few different methods..
Chainfire's direct method: http://forum.xda-developers.com/showthread.php?t=1103399
lyriquidperfection's one-click method: http://forum.xda-developers.com/showthread.php?t=1125414
CLShortFuse's one-click method: http://forum.xda-developers.com/showthread.php?t=803682
LitePro's ROM and Root method all-in-one: http://forum.xda-developers.com/showthread.php?t=1095274
All of these have their own merits. But I'm trying to figure out the best approach for myself.
Although Lightn'ing (LitePro's) looks interesting and I may try that ROM later, for now I want to avoid changing the ROM till I know I like the phone. So I'm looking at the first three choices.
The one that I think I would be able to do easiest is either lyriquidperfection's or CLShortFuse's methods as they both are one-click solutions and I just need to grab the right kernels.
I don't know if there's any reason I would want to go with Chainfire's instead of the two previously mentioned. If there is please let me know.
I asked this question on the respective threads but as of posting haven't gotten an answer of if there's any reason to flash the original kernel back after rooting and if I keep root if I flash it back.
I also don't know much about the use of Jigs to avoid the flash counter going up. Is there any reason I need to worry about the flash counter going up? Is there a limit on number of flashes on a phone?
Unlocking:
For unlocking I looked at:
http://forum.xda-developers.com/showthread.php?t=1092451
However it seems for my specific phone (Virgin/Bell) we use this method as posted in the same thread:
http://forum.xda-developers.com/showthread.php?p=16482293#post16482293
This seems pretty much straight-forward. I just got to root the phone then get and run the app mentioned. Phone will crash/reboot and then no SIM lock.
If there's anything that seems wrong with this let me know please.
Other stuff:
At some stage here I want to be able to back up the stuff on the phone and get other typical tools.
I keep hearing about ClockWorkMod constantly and it seems to be a tool for backing up the phone data and making it easier to flash stuff in without use of ODIN.
I haven't found clear documentation on how I would do this on the SGII specifically.
I also here Titanium backup (sp?) is also a good idea to install at some point.
Is there other apps or otherwise I should be looking into before I start this journey into the wonderful world of hacked smartphones?
-This is a place marker for me making amendments so that later this may be more or less a guide for other beginners-
Dav_Edward said:
Although I've flashed non-phone devices in the past (routers, PAP2, Ipod classic, etc.) This is the first time I'm going to be flashing a SmartPhone that I've ordered which I should be getting very soon.
I ordered a Samsung Galaxy S II and have been crawling the forum trying to learn all I can before I try rooting and unlocking my phone when I get it. But I'm having trouble deciding on a few things.
Hopefully my question can become a guide for other new people who are just starting off like me.
Rooting:
To begin, I'm trying to figure out what's best for rooting.
I've looked at a few different methods..
Chainfire's direct method: http://forum.xda-developers.com/showthread.php?t=1103399
lyriquidperfection's one-click method: http://forum.xda-developers.com/showthread.php?t=1125414
CLShortFuse's one-click method: http://forum.xda-developers.com/showthread.php?t=803682
LitePro's ROM and Root method all-in-one: http://forum.xda-developers.com/showthread.php?t=1095274
All of these have their own merits. But I'm trying to figure out the best approach for myself.
Chainfires simplest method less problems for most .
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
I also don't know much about the use of Jigs to avoid the flash counter going up. Is there any reason I need to worry about the flash counter going up? Is there a limit on number of flashes on a phone?
Zero as Samsung will invalidate warranty for custom roms or rooted phones .
Other stuff:
At some stage here I want to be able to back up the stuff on the phone and get other typical tools.
I keep hearing about ClockWorkMod constantly and it seems to be a tool for backing up the phone data and making it easier to flash stuff in without use of ODIN.
I haven't found clear documentation on how I would do this on the SGII specifically.
Their is no documentation its probably written up in the FAQ or Wip but is a relativity simple tool anyway .Backup restore phones rom install custom rom wipe data factory reset reset battery stats to zero .
FAQ
http://forum.xda-developers.com/showthread.php?t=1065995
Wip
http://forum.xda-developers.com/showthread.php?t=1125282
I also here Titanium backup (sp?) is also a good idea to install at some point.
On a rooted phone Titanium pro allows you to back up your apps and also to freeze apps .
jje
Click to expand...
Click to collapse
Thorough stuff, props to you sir - you know search so you'll get your first thanks...
I would advice you to go with Chainfire's method. It's the easiest and most versatile method IMO. Definitely the best for beginners because you keep your stock ROM yet still are rooted and get Clockwork Mod.
The installed CWM (Clockwork Mod) Manager app with Chainfire's work is an easy way to see what it does - basically you can backup and restore your whole system/device, plus flash custom ROM/kernels/themes etc. Look into the flashing part later - baby steps are good here!
Titanium Backup is an excellent backup app for backing up/restoring apps and data, as opposed to the whole system. Buy the Pro version, definitely worth it.
I also like My Backup (also on Market), excellent for backing up contacts/SMS/MMS. The free version is a 30 day trial.
Can't help with unlocking, never needed to - sure others can help.
Good luck
Edit - JJ beat me too it, hadn't seen his post. Must type faster...
@JJEgan & @B3311, thanks for the useful information.
I was going to try those one-click methods because I thought those were the more newbie friendly methods. Thanks for the information to try using Chainfire's instead.
I will try using Chainfire's method instead with your advice when I get the phone. Having the tools like his CWM hopefully will make things easier.
I am a bit concerned though about his mention that Rom Loader won't work with his version of the build. I'd still like the ability to use custom roms down the road once I learn how to properly back up the phone so I can experiment with various roms till I find the one I like most.
Any advice about using rom loader or other possible difficulties using Chainfire's kernel?
Dav_Edward said:
@JJEgan & @B3311, thanks for the useful information.
I was going to try those one-click methods because I thought those were the more newbie friendly methods. Thanks for the information to try using Chainfire's instead.
I will try using Chainfire's method instead with your advice when I get the phone. Having the tools like his CWM hopefully will make things easier.
I am a bit concerned though about his mention that Rom Loader won't work with his version of the build. I'd still like the ability to use custom roms down the road once I learn how to properly back up the phone so I can experiment with various roms till I find the one I like most.
Any advice about using rom loader or other possible difficulties using Chainfire's kernel?
Click to expand...
Click to collapse
Most just put custom rom on sd card and flash via CWM .
Sorry no nothing about Rom Loader .
jje
I would also advice using CF-Root. I was scared of rooting my phone, but after using CF-Root, I don’t know why I was so scared. The process took a little over 30 seconds (I need practice). To me at lease I think it’s the easiest method, you just need to make sure to download the right kernel.
EDIT:
Get a UBS jig, After rooting, I had the "yellow triangle" I turned off phone, removed battery, inserted jig, put back battery, entered download mode, restarted phone and no more "yellow triangle"
Okay so I checked it out and it looks easy to root this phone but I want to put clockworkmod on the phone so that I can make custom backups. I am a little confused it looks like this phone has a download mode where I can do my flashing without CWM is that correct? If I understand right I have to download or flash a custom kernel with temp root permissions in order to install CWM, then from there I can use superoneclick to root permanantly. So then do I go back to the original kernel or a custom one if I like? Do I need CWM to install custom ROMS or can I just use this download mode? I am sorry for all the questions this is only my second samart phone actually third but I dont really count the Blackberry curve 2g. I never rooted my g2x till after it got its gingerbread update so I never used superoneclick I just had to use nvflash to install CWM then flash a custom ROM so this is a little different to me. I see there is alot of dev stuff for this phone and I cant wait to get started but I want to make sure I do it right. I saw a few other methods for root but since I want cwm anyway I figure just use superoneclick. Also if I hold vol down+home+power then my phone will do a factory reset right? unless I install CWM then it will boot into cwm right? Sorry to ask all these questions I just need alittle bit more info before I start I am very nosy and I like to understand fully what I am doing and how it works. so anyone with any helpful advice on this phone please chime in I would like to know all the tips tricks and shorcuts that this phone has. Thanks in advance and again it is nice to join a new fourm.
Charlie
Tl;dr; there's a Q&A thread with your answers.
Have a look for cf-root, its got everything you need and easy to follow instructions
Sent from my GT-I9100 using XDA App
As per seanicca above, you need CF root which is both rooting and CWM in one flash (using Odin).
Look at the xda bookmarks in my sig for a link and just read the instructions in the thread. It's a couple of minutes and it's done.
So what is this flash counter I keep reading about? Samsung actually put a counter in the phone to see how much flashing goes on? I still cant belive this phone has its own flash mode basically. I dont know that much about phones maybe that is a normal feature but I dont think so.
mojorisin7178 said:
So what is this flash counter I keep reading about? Samsung actually put a counter in the phone to see how much flashing goes on? I still cant belive this phone has its own flash mode basically. I dont know that much about phones maybe that is a normal feature but I dont think so.
Click to expand...
Click to collapse
You're right - it's not a normal feature. I've never had it on a phone before the S2, but I'm sure it must have been around before. I've heard of some suppliers refusing to repair or replace phones that have a flash count on them, but I've also heard of an equal amount that don't care and ignore or don't know about it.
As you'll see all over the place on this forum there's 2 ways to get rid of it. 1 reflash a stock kernel, or 2 use a usb jig. I've gone down the 2nd route as it was only a few quid and is just quick and easy.
I'm to HTC and rooting a phone. Wanted to know how hard it is to root and what is a good safe rom to go with for my first try. Thxs, any help would be useful
Since your new, might I suggest the search button? Your exact question has been asked a few times before.
Sent from my ADR6425LVW using XDA App
It's not hard at all. I suggest you read a lot before you do anything though. There are several guides in the dev section and you would do yourself a favor to read all of them as well as the replies in the thread. And read the entire thread of any ROM you are thinking of flashing. List of guides, roms, kernels etc here: http://forum.xda-developers.com/showthread.php?t=1425091
First thing to do is check if you have the update or not. You'll want it before you unlock and root. Go into Settings > About phone > More and see if your baseband is 0.95.00.1118r, 0.95.00.1223r and your software should be 2.x. I don't have the exact number because I went with a ROM that is based on the build before the OTA. If your baseband matches the above you should have the update and are ready to unlock.
Follow the instructions here to unlock:
http://forum.xda-developers.com/showthread.php?p=20780879#post20780879
Once you are unlocked you will want to flash Amon Ra, a custom recovery, which will let you make backups and flash stuff easier and allow you to root.
Get that here:
http://forum.xda-developers.com/showthread.php?t=1339679
Put that img file in the same folder you used for unlocking.
Boot your phone into bootloader by shutting down, pull the battery and put it back, hold volume down + power until the white bootloader screen comes up. Select fastboot, connect it to your pc and use the following command:
fastboot flash recovery nameofrecovery.img
Once that is flashed, select bootloader, then recovery. Navigate to the developer menu in recovery and install su. Now you are rooted. I would make a nandroid in recovery at this point and label it as stock rooted so you always have this to go back to should you have any problems.
Then pick a ROM and the instructions for flashing that will be in the thread. I would stick to GB until you are more comfortable then you can try ICS. ICS ROMs are still a bit buggy and don't have everything functioning perfectly so read up before you flash any of them.
Ineffabilis is a good ROM that I've used. People like CleanRom and Nils Business Sense. You should just read the threads and see what they offer and pick one. You can always try another one afterwards.
nosympathy said:
Since your new, might I suggest the search button? Your exact question has been asked a few times before.
Sent from my ADR6425LVW using XDA App
Click to expand...
Click to collapse
^ This. I'm all for answering questions and everything, but it's annoying when people don't even try to search for the answer themselves. But there is always someone that will answer their question... So the cycle will go on.
I agree one should do there own research, but rooting can be a little overwhelming to someone that is new to it. Its ok to ask for a little guidance.
stelv said:
I agree one should do there own research, but rooting can be a little overwhelming to someone that is new to it. Its ok to ask for a little guidance.
Click to expand...
Click to collapse
The point to be made is to ask in one of the threads that was already created(and found via search). I can honestly say that it doesn't matter either way to me. A little forum etiquette would be nice though.
i have a motorola atrix 4g from at&t and i want instal a rom for europe(with option for 2G,and option for data conection),
what rom can i use and instructions?
thanks
Did you search around the forum already?
i found something with csrom,but no instructions for instal
I think you need to do some more searching and reading. And by "some more" I mean "a LOT more".
"Something with csrom"? You could've at least read up about what it even is.
Word of advice: the phone is not your windows PC made for dummies, you don't install things here by simply starting an EXE file and clicking "Next" a few times. If you don't have an unlocked bootloader and a custom recovery, it's way too early for you to be looking at ROMs.
However, I want to applaud you for at least opening the thread in the right section. Too many people can't even get that right.
if you want to help me with some real answers is ok,if not please don't post with some like "However, I want to applaud you for at least opening the thread in the right section. Too many people can't even get that right".
thanks
Rom 2g selectable
If you are rooted and have custom recovery flash Cyanogenmod 7.2.0 there is a stable version available for download on there site.
http://get.cm/?device=olympus&type=stable
iugo said:
if you want to help me with some real answers is ok,if not please don't post with some like "However, I want to applaud you for at least opening the thread in the right section. Too many people can't even get that right".
thanks
Click to expand...
Click to collapse
That was the help... Shame you don't realize it. Sorry if you got offended by that, but that was for your own good.
If you get stuck at some point while flashing, I'll be more than glad to offer advice. However, I won't ever serve things for you on a silver plate because you couldn't be bothered to search and read. "Give a man a fish, you'll feed him for a day. Teach a man to fish, you'll keep him fed the rest of his life." In other words, you'll get far more benefits from searching and reading and learning on your own than from me serving you numbed down steps and procedures. Especially with this huge amount of threads already explaining everything you could possibly need.
i try to unlock bootloader with puding and rsd lite and now my phone is bricked,
when start the phone on the screen apear:
SVF:105:1:2
failed to boot 0x1000
no os detected,going to rsd mode in 5 seconds.
press any key to stop cont down
avalable modes are:
there is 14 mode
and the last line say: curent chioce is mode:rds
starting fastboot protocol support
i don't know what can do to solve that error
the phone have 2.3.6 version
See, this is exactly what I was trying to prevent by telling you to go and read more. But you wouldn't listen. So now you have a brick. Congratulations.
Luckily this should be fixable, but YOU NEED TO READ MORE. After you're done reading, you can try this (use options 3).
thanks,now phone work with same vesion 2.3.6, and is unlocked,now can i instal any custom firmware?
No.
Did you read up like I told you? Doesn't seem like you did.
At the very least, go through the posts in this thread again. I already mentioned what you need to flash.
i read but i don"t understand so good(maibe my english is bad) from here http://forum.xda-developers.com/showthread.php?t=1182871 i understand can be flash with rsd but another member post in my tread to flash cyanogedMod in recovery,here i'm confused.
my phone is unlocked,rooted and clock word instaled.
thanks
ravilov said:
See, this is exactly what I was trying to prevent by telling you to go and read more. But you wouldn't listen. So now you have a brick. Congratulations.
Luckily this should be fixable, but YOU NEED TO READ MORE. After you're done reading, you can try this (use options 3).
Click to expand...
Click to collapse
Lol you crack me up, keep up the honesty it wears like a fine tuxedo.
ha ha ha, you are very very funny
iugo said:
i read but i don"t understand so good(maibe my english is bad) from here http://forum.xda-developers.com/showthread.php?t=1182871 i understand can be flash with rsd but another member post in my tread to flash cyanogedMod in recovery,here i'm confused.
my phone is unlocked,rooted and clock word instaled.
thanks
Click to expand...
Click to collapse
Ok you used that link, it provided you with an unlocked bootloader. Now with that and cwm installed. You can go to the development thread and download a rom. Persay, http://goo.im/devs/Th3Bill/MIUIus/Atrix/MIUI.us.Olympus_2.9.29_Aroma_Signed_Th3Bill.zip
now install that zip from cwm "recovery". And follow directions. That should give you an idea on how most these newer compiled Roms work. (Newer compiled roms all now have aroma or are like kitchen sink (project).
if you need more help just keep asking questions. Worst you can do is bootloop and flash something else.
Edit: fyi : root is nothing like the bootloader, or cwm. Root is inside the rom, you will find almost every rom HAS root in it.
Now if you flash a rom, before you do that... backup your things as you will loose text, call logs, application data, contacts, etc.
fthanks to all for help.
iugo said:
i read but i don"t understand so good(maibe my english is bad) from here http://forum.xda-developers.com/showthread.php?t=1182871 i understand can be flash with rsd but another member post in my tread to flash cyanogedMod in recovery,here i'm confused.
my phone is unlocked,rooted and clock word instaled.
thanks
Click to expand...
Click to collapse
Ciloteille said:
Ok you used that link, it provided you with an unlocked bootloader. Now with that and cwm installed. You can go to the development thread and download a rom. Persay, http://goo.im/devs/Th3Bill/MIUIus/Atrix/MIUI.us.Olympus_2.9.29_Aroma_Signed_Th3Bill.zip
now install that zip from cwm "recovery".
Click to expand...
Click to collapse
NO!!!!!
Uggh!
Does nobody here read what's been said before?!
CWM recovery that comes with the automatic unlocker is TOO OLD. You won't be able to flash any recent ROM using that.
You need to flash a newer recovery. I recommend RomRacer's CWM-based recovery.
I need advise on whether I should root my GS3 and thinking of flashing CM10.1 or just wait to see if the Sudden Death Syndrome (SDS) passes my device.
Thing is I'm afraid to void my warranty. Not a big deal but a warranty is always good to have. What's your advise on this matter?
Also, total noob question, what would be the easiest way to root and flash CM10.1? It isn't exactly a one click process like jailbreaking an iPhone and this is my first Android powered device so yeah.
What advise u need ?
Got my SIII yesterday open the box used this toolkit http://forum.xda-developers.com/showthread.php?t=1703488 to root and flash CWM and then Omega Rom, All the process took me approx 30 Mins including the Rom DL.
if u want to return the phone for warranty u can always flash the Stock Rom.
Hope i helped.
rkkaranrk said:
What advise u need ?
Got my SIII yesterday open the box used this toolkit http://forum.xda-developers.com/showthread.php?t=1703488 to root and flash CWM and then Omega Rom, All the process took me approx 30 Mins including the Rom DL.
if u want to return the phone for warranty u can always flash the Stock Rom.
Hope i helped.
Click to expand...
Click to collapse
Well rooting and flashing custom rom doesn't seem to be as safe as jailbreaking an iPhone. I can't seem to find threads for CM10.1 and how stable that ROM is. I am still feeling insecure in rooting and all that.
The flashing stock rom is also a bit foreign to me! Where do I get stock rom? and if I root there will be that system modified thing on Samsung phones right? it's all these things that makes me think twice..
Well rooting and flashing custom rom doesn't seem to be as safe as jailbreaking an iPhone. I can't seem to find threads for CM10.1 and how stable that ROM is. I am still feeling insecure in rooting and all that.
The flashing stock rom is also a bit foreign to me! Where do I get stock rom? and if I root there will be that system modified thing on Samsung phones right? it's all these things that makes me think twice..
Read the BASICS before you start .
Flashing and root are not risk free its your choice .
Risk is vastly increased by refusing to read/follow instructions .Millions of safe flashes by XDA members .
http://forum.xda-developers.com/showthread.php?t=1927113
jje
JJEgan said:
Well rooting and flashing custom rom doesn't seem to be as safe as jailbreaking an iPhone. I can't seem to find threads for CM10.1 and how stable that ROM is. I am still feeling insecure in rooting and all that.
The flashing stock rom is also a bit foreign to me! Where do I get stock rom? and if I root there will be that system modified thing on Samsung phones right? it's all these things that makes me think twice..
Read the BASICS before you start .
Flashing and root are not risk free its your choice .
Risk is vastly increased by refusing to read/follow instructions .Millions of safe flashes by XDA members .
http://forum.xda-developers.com/showthread.php?t=1927113
jje
Click to expand...
Click to collapse
I've gotten myself into a bit of a problem now. I used ChainFire's exynos exploit patch a while back and I am unable to get root when trying to use heimdall. I'm on a Mac so that was the first thing that came up. Ideas?
PS. Heimdall says it worked perfectly but when I go into recovery, it's androids recovery with a red triangle thin in the centre. I'm now not rooted, and system says I'm modified. So I'm screwed left and right. No CWM Recovery, no SuperSU, and I'm flat out of ideas. I though turning on USB debugging would help but sadly didn't. I don't even know how to reverse the process to have my system status showing normal too!
Damn this...all because of stupid me patching