I am unable to wake the phone during a call. As soon as I answer a call, or press the call button my screen turns off. I can not wake it with proximity sensor, double tap or power button. There is literally no way to turn on the screen once a call has started. It was random when it started. I had been using Vanir for a while and then one day it started on my phone, and never left. I have even flashed my OG nandroid stock and the issue was present there after flashing to that.
I have swapped ROMs, AOSP x4, BarRin, Stock, you name it, but to no avail. I have cleared everything off my internal, wiped the internal memory, sideloaded a ROM back from scratch and booted up plain jane... same issue.
I am attaching a link to a logcat incase anybody has any ideas. I'm simply lost with this, and it is a major issue considering every time I make a call I have to be ready to take the case off so that I have faster access to pop the back off and battery pull. This is not a way to live.
PLEASE if someone has any ideas on how/where to go about fixing this, I will be grateful.
Not sure if it matters, but after a call ends, I need to wait about 5 or secs before the power button will be recognized. After it's first press it seems to first power off the screen, as though it is awake the whole time, but black and inoperable. After the screen thinks it's off, the second press turns it back on. I have also tried other dialers too, but it totally seems like an integrated OS/Firmware issue at this point.
Are you by chance running Greenify? I was having some issues when sleeping system apps. What Xposed modules are you currently running?
No battery apps installed whatsoever. No battery saving modes enabled.
Mods- App Settings
DarkTube
GravityBox [KK]
Pandora Patcher
Youtube AdAway
Sorry a bit tired. I just noticed you stated it still happens after you nandroid back to your previous backup. Do you have a screen protector or anything on it?
Try going to Settings/Call and disable the proximity sensor and see if you have the same results
It's not the sensor though b/c it has 0 results with the double tap to wake and also the power hardware button itself. Holding the button, pressing it quickly, tap it multiple times in a row. Additionally, I do not have a screen protector.
Related
When I do a soft reset, my phone is fine and everything works okay. However, after the first time the screen cuts off to standby, when it resumes the buttons on the bottom panel (Home, Back, Call, End, Select) no longer function. I can confirm that they all function perfectly prior to standby, and after the fact, none of them.
I'm wondering if this is a known issue, and if there's anything I can do to patch it or look it up. I've tried a few different roms, and it's a constant issue. Even after a full wipe with Task29 and a reflash with two separate roms, the behavior sticks. As soon as the phone comes back from standby mode the buttons just fail.
If it's at all relevant this is a Sprint Touch Pro. If no one can help me and there's no alternative I ask for help finding a way to disable standby entirely. Sure keeping the LCD on constantly will drain the battery, but being able to use the answer and hang up buttons, and the camera FAR outweighs that.
Well, I haven't been able to find anyone with a solution, but I've worked around the issue a bit by installing Keepawake 1.1 and setting it to run when manilla is running. Now my phone never sleeps, and the face buttons work. I'm currently looking for a small piece of metal I can mount over the power button to prevent accidentally triggering standby mode. Then my phone will be mostly usable again. Hopefully someone can shed some insight as to the cause of it all, but for now at least I may have found a way to work around it. We'll see how it affects my battery life.
edit:
Most helpful recommendation (aside from a solution to the root of the problem): could anyone recommend a way to disable the power button, or possibly remap it to launch task manger or something useful?
edit2: Remapped the power button to lock the phone using RaphKeyboardConfig. Works okay for now. Between this and keepalive, my phone won't go into standby if left on it's own.
The accelerometer on my Razr Maxx works promptly and perfectly except under two conditions. The first -- if I'm lying down, say on a couch or in bed, and holding the device over my head facing down. In this position the device will almost immediately shut off over and over. It won't reboot, just shut down. I can always restart it the same way I would from any "sleep". I can get the device to stay on merely by rotating it to face "up" no matter whether I change position or location or run or do not run any particular application. Is this common? Is it by design for some reason? The second -- if I have Button Savior installed, the Maxx accelerometer will work but there will be a significant delay in responding. Like 15-30 seconds delay! No Button Savior - no delay. Install Button Savior - delay. Uninstall Button Savior again - no delay. This troubles me as I really like Button Savior even on devices that have "hard" buttons. Having these controls right under my thumb is the fastest way to navigate, for me. Button Savior (updated) works perfectly for me on other Android phones, on my rooted Nook Color (CM7), even on my rooted Nook Touch. Any cures for either ill?
Hi
The accelerometer issue... does this happens from the first day you bought it? I trying searching similar issues, could not find anything. I am almost sure it is physical defect of some kind, you should probably take it back for replacement.
I don't know if the accelerometer issue related to Button Savior began when I first installed the app (as opposed to coming from a particular app update, for instance) as it took a long process of elimination to find the connection. As to the "upside down" issue I believe it has always done that. However -- it only does it if I TURN ON the device while it is upside down. If I start using it facing up, say watching a video, and then turn it upside down the video continues to play flawlessly. Bizarre!
I know there is an option to use the light sensor to detect when your phone is in your pocket, and turn off. Maybe it's on on your phone, and it's detecting lower light when you flip it over and shutting the screen off?
ok, so i misunderstood the issue, i thought the phone turns off completely...
if it only goes into "silent" or "lock" mode... maybe you installed some kind of app that does that when you flip? or maybe your player has one of those settings? like... say you are in a meeting, with your phone on the table, it rings... you just flip it and it goes silent.... some android build have that as a default setting already...
here, check this so u understand better what i mean :
http://www.appbrain.com/app/flip4silence/org.failedprojects.flip4silence
hope this helps!
tried updating yet? i had the same problems prior to the 65.1.40 update
weird and terribly disappointing. Once in atleast 15 unlocks, when I press the power/wake button, screen just doesnt respond. I try to swipe, but no response. But when I press wake button to turn off screen and press it again, theres no issues. This happens only during unlocking screen. Did anyone face this issue?
rest all is good..no lag..once unlocked phone works perfectly...no lag..no getting stuck..again, let me tell u this issue happens once in 15-20 lock/unlocks.
I think I have the same issue as you, but in case I don't I will post what I am seeing on my device.
In about the same frequency, say once in every 15 unlocks from phone sleeping, the screen will come on but will be completely unresponsive. Doesn't matter if it is swipe unlock or pin code etc, there is no response to touch input on the screen. In fact, I think the screen is just frozen or the operating system is causing the lock screen to hang.
If the lock screen is hanging, pressing power will:
(a) sometimes make the phone sleep again
(b) make the phone screen kind of glitch/blip and then it takes input again
(c) does nothing and the screen remains on and hung/frozen
Occasionally mashing both the volume key and power key will help fix it, but usually if it is completely stuck I have to do a hard reset (holding HOME+VOL UP+POWER and then selecting reboot from the menu).
Now - I think this could be an app, but not sure.
When I first got the phone, set it up with my Google account etc, it went ahead and downloaded ALL the apps I had installed on my previous phone (HTC Sensation running Android ICS). So if it is an app, it is having issues with this phone, not the OS, imo.
I uninstalled all those automatically downloaded apps, and used the phone for a bit without my normal stuff installed. Then started installing apps singularly.
I think it is either Facebook or Alarm Clock Xtreme. The latter makes more sense given it would be polling the system to find out when to go off, so it is doing more in the background I would expect than Facebook or any other non-system app.
Other apps I have installed/running:
Swiftkey X
3G watchdog
Dolphin Browser HD
ES File Explorer
Winamp (locks without this running or running at all in lock screen mode, so that is not the issue)
Real Calc
Google Drive
Facebook
Alarm Clock Xtreme
It is quite frustrating for a brand new phone to have these issues. Not sure if it is hardware related, and if it is, I want to find out soon so I can take it back to carrier within their 28day device swap RMA period.
Thoughts?
So others may try to help or identify the possible cause / fix .......
What is your firmware version?
Are you rooted, custom ROMs or Mods etc?
Stock ROM,Baseband : XXLE8. Build No :XXALE9.
But my screen responds after i press wake button again. You are right seems to be issue with the app. i will just compare your apps and below are the ones which are common between us.
Facebook
3G watchdog
Dolphin Browser HD --i never use
Google Drive
a fix that worked for me
Steps to the solution that worked for me (so far) were to uninstall:
1. Alarm Clock Extreme (no noticeable result but I wasn't needing that application anyway)
2. I had WIFI Fixer installed because of the problems I experienced with the WIFI connectivity on my Galaxy S3.
I disabled that application and problems seemed to go away for a time, but every so in a while they resurfaced. Much less often than before, though.
I was still stuck with my WIFI problem anyway, so I looked into solutions for that problem and since I could not find a workable solution I uninstalled Wifi Fixer and started tweaking my WIFI settings.
While doing that I noticed that disabling "Network Notification" under the Settings -> WIFI -> Advanced tab fixed both my problems.
Now I can't be 100% sure this solution works for all, but I am pretty sure the application that created the problem was "WIFI Fixer".
It's been more than 4 hours now without the "disabled unlock screen from hell", and I’m very happy.
LOOOL
Actually...
My WIFI problem was not solved.... but I found a solution on another forum , which you can read below:
I dialed *#0011# then pressed menu button, then selected WIFI, and pressed the button to turn off the "WIFI power save mode". Hit back until I was back in the homescreen. WIFI has worked to my satisfaction ever since.
This is not a solution, this is a work-around....
It will remove the standby wifi.... My phone was at 0% battery in one night... But actually yes, the phone doesn't hang up when unlocking.
Someone who had replaced the phone could tell me if the problem is solved with a new one ?
calint said:
My WIFI problem was not solved.... but I found a solution on another forum , which you can read below:
I dialed *#0011# then pressed menu button, then selected WIFI, and pressed the button to turn off the "WIFI power save mode". Hit back until I was back in the homescreen. WIFI has worked to my satisfaction ever since.
Click to expand...
Click to collapse
Sadly having the same issue! and only sing LG6 and LG8 of the UK firmware was release.. out the box was LG4 if I am not mistaken... have been putting off custom roms due to the fact stock one is so far good..
This fix seems to be working..Thanks! will live with battery drain as data is expensive in SA!
khan.dharvesh said:
weird and terribly disappointing. Once in atleast 15 unlocks, when I press the power/wake button, screen just doesnt respond. I try to swipe, but no response. But when I press wake button to turn off screen and press it again, theres no issues. This happens only during unlocking screen. Did anyone face this issue?
rest all is good..no lag..once unlocked phone works perfectly...no lag..no getting stuck..again, let me tell u this issue happens once in 15-20 lock/unlocks.
Click to expand...
Click to collapse
This looks like a bug from wifi, i had the same problem and i found a fix:
On the dialer type: *#0011#
Then press menu -> wifi, there is a button ON ( power saving or something ), change it to OFF.
let me know if it solves ur problem
It worked!!
douglasurbano said:
This looks like a bug from wifi, i had the same problem and i found a fix:
On the dialer type: *#0011#
Then press menu -> wifi, there is a button ON ( power saving or something ), change it to OFF.
let me know if it solves ur problem
Click to expand...
Click to collapse
This worked for me!!! Thank you!! I was about to take a hammer to this phone! :good:
I seem to have another problem. When unlocking the phone the screen turns on in a quite ok amount of time, but then when I touch it immediatelly after it turns on it doesn't react to touch. This moment when touch is not working is getting longer and longer depending on how long the system is running, anybody else sees this?
RhavoX said:
I seem to have another problem. When unlocking the phone the screen turns on in a quite ok amount of time, but then when I touch it immediatelly after it turns on it doesn't react to touch. This moment when touch is not working is getting longer and longer depending on how long the system is running, anybody else sees this?
Click to expand...
Click to collapse
Not sure what ROM and kernel you are using, but at a big guess, try reflash another kernel or with less aggressive settings.
Sent from my GT-I9300 using xda premium
hey guys. I have a problem with my s3's lock screen similar to the described. whenever I press the power button to unlock, it takes 2 second for the screen to turn on. Anyone got any ideas on that?
I have Speed Rom 5.1 on my Amaze. When I am finished with a call, the screen stays black. I try to hit the power button, but nothing happens. I have to remove my battery in order to reboot. Can someone shed some light on why this happening? I am thinking that it may have something to do with my CPU Tuner settings, but I am not sure.
mrcash101 said:
I have Speed Rom 5.1 on my Amaze. When I am finished with a call, the screen stays black. I try to hit the power button, but nothing happens. I have to remove my battery in order to reboot. Can someone shed some light on why this happening? I am thinking that it may have something to do with my CPU Tuner settings, but I am not sure.
Click to expand...
Click to collapse
Probably that or a bad flash, just reflash, see if it solves the issue.
Most likely it's something simple, like an issue with your proximity sensor. I know there was an app that could calibrate that but I forgot what the app was.
Stock Rom - Black screen while phoning
There is a similar problem on my wife's phone with a stock rom (not rooted Amaze from T-Mobile). When making or accepting a call, the screen will instantly go off even without leaning the phone against anything and won't turn on unless the power button is pressed. Sometimes the screen would turn on by itself after a while after the other phone was hanged.
I've downloaded AndroSensor app: the proximity value does't change even when touching the area near the earpiece. It keeps showing ( 0.5mA ) 3.5 in.
I've found a thread which is there since april 2012 and describes quite a similar problem.
okay.. i just the original post date for this thread.. please don't bring back threads that are 6 month's old which issues might have been solved already since no ones been posting in it for 6 months...
(anyways) this is what i was gonna say
on my current s3 when my phone is placed to my ear it cuts off the display.. and if you pass your hand anywhere near the sensor's to the top near the camera it cuts off the display.. maybe there's a feature like that enabled on the stock rom also.. or you could possible check with the system settings to see "screen" on/off settings in display or power saving mode.. or something...
Thanks for the answer. I didn't notice that the thread was that old. I think I will keep up a newer one. But the current issue isn't likely to have been solved.
The problem doesn't seem to be triggered by wrong sensor measures (because the screen will go off even after disabling the sensor) nor does it depend on the rom version (same thing on the CM10).
Resolved:
It will sound stupid but I have found a simple solution:
I have just wiped the screen in the upper left corner where the proximity sensor is located and it started behaving normally. Though I don't use any protection tape on the screen it seem to have become less sensitive because of mud or sweat.
In two different AOKP roms (AOCP, PACman), I have a problem where if I'm on a call and forcefully turn the screen off by pressing the power button (as opposed to by the prox sensor or by timeout), the phone reboots. Interesting, if there's audio on the call, it will continue to play as the shutdown animation is playing.
I have the accessibility setting to end calls with the power button turned OFF. I can't think of any other settings which would affect this.
I tried searching on this symptom, but didn't find anyone with this issue. I clean installed both ROMs, but AOKP seems to be a common denominator. Anyone have advice for me?
Does it ever reboot at other times after you've pressed the power button, or is it only while in a call? I recently had a problem where the phone would reboot after I turned it on. I was on CM and went to SHOStock and it still did the same! I figured, hell, after two different ROMs and it still acting the same, maybe it was hardware. Ended up taking the phone apart and there was some gunk around the inside part of the power button keeping it held in too far and triggering the reboot after a few seconds. After removing the button and carefully cleaning it (it's very small), I now no longer have a reboot problem on either CM or SHOStock.
sbrown23 said:
Does it ever reboot at other times after you've pressed the power button, or is it only while in a call? I recently had a problem where the phone would reboot after I turned it on. I was on CM and went to SHOStock and it still did the same! I figured, hell, after two different ROMs and it still acting the same, maybe it was hardware. Ended up taking the phone apart and there was some gunk around the inside part of the power button keeping it held in too far and triggering the reboot after a few seconds. After removing the button and carefully cleaning it (it's very small), I now no longer have a reboot problem on either CM or SHOStock.
Click to expand...
Click to collapse
I've only had it happen so far when turning the screen back on during a call. If I don't force the screen off in the first place, the phone will happily turn the screen on and off due to prox sensor. It will also time out and let me turn it back on without the power button with no issue. Because of this, I don't believe it's a mechanical issue. I didn't have this problem until trying AOKP ROMs, the timing is too coincidental.
Based on what I'm seeing with the boot animation, it isn't a full reboot (I don't see the SGS II logo, for example). I didn't even know that rebooting only the OS was possible.
I assume there are logs I can check to help figure out what's going on, but I don't know where to find them.
I found a string of posts in the Carbon thread: http://forum.xda-developers.com/showthread.php?p=46998058&highlight=just+carbon+reboots#post47133798. Same symptom, but different trigger. I tried, I can rotate the camera just fine. I'm currently running the 10/31 nightly of PACman, guess I'll update past 11/2 later today and see what happens.
11/6 was a bust (lots of FCs after a clean install), so now I'm trying 11/10, 11/4, or 11/5.
Initial results with 11/10 show that the problem is fixed; gonna restore my old ROM, go through the TiBu dance, and see what happens when I finish setting up 11/10 completely. Maybe it's something I'm doing.
OK, 11/10 fixed my primary issue. Further, I used to have pretty nasty screen-on lag that I couldn't fix even after messing with the CPU and I/O profiles. Hurray!
Based on my experience this may affect other AOKP based ROMs (like Carbon or AOCP), but it might have been present in pure CM (CyanogenMod) - hard to tell. Hope this helps someone else.
****, it's back. Must be something I'm doing. The quest continues...