Hello guys, there is no specific forum for this device, that is why have started this new thread.
My xolo q500 is bricked. It stucks at the logo and doesn't go further. I was trying to install CWM recovery. But niether CWM nor TWRP not available for my device so i tried to flash CWM of some other device from the rom manager. It was of xolo q700. After flashing my device got shut down but stcuked at the boot logo when restarting.
All i wanted to do is to flash a custom rom. I rooted. I tried to flash it via the default recovery but it was not succesfull i dont know why. I googled and came up to know that i need to install custom recovery like CWM or TWRP to successfully flash custom roms. So when i flashed cwm of xolo q700, this happened....... It was all because of that other device's CWM..... and that recovery.img file was placed in the internal memory. So overall, i flashed it from the internal memory.............
Now my phone niether boots up normally nor boots in the recovery menu. It stucks at the xolo logo. I googled but i found unbricking methods for mediatek devices via sp flash tools but my device has Qualcomm Snapdragon chipset , so that didn't worked. Please help me how can i unbrick my device? Is there any method to unbrick qualcomm based devices?
I had that thought of not installing stuff of another device. But i niether found any custom rom nor recovery for this device. So i decided to just use another device's stuff. Yeah i know that totally crazy idea... but.....whatever when i plug it into PC it does not detect anything but when i plug it in pc after removing battery, its LED starts blinking. When this happened first time... Something like 'Qualcomm msm' was installed but nothing thereafter......
Related
My Xolo q500 is stuck at boot logo! bricked!
Few days back it started to restart itself again and again, so I tried to do factory reset from settings... But before the process could start it restarted again. Tried to reset from recovery mode but it failed dont know why. I also tried to reboot in CWM recovery mode but it dont. It reboots in Android System Recovery and I cant flash Stock ROM from it.
It's firmware .zip file doesnt contain the scatter file so cant flash it from SP Flash Tool!
Any way to flash it???
XOLO Q500, Qualcomm Snapdragon Processor MSM8225Q
hello,
Phone Model: Wing M45
Specification: Android 4.2.2.
MT6572 1.3ghz
256mb RAM
The screen on my phone has stucked on manufacture logo and process can't go further every time i restart it.
The problem is that i can't even install custom ROM. Because phone is not in USB Dubbing mode and not in Developer option.
So when i install ROM manager like CWM it gives error like"partition 'recovery' not support flash".
Now the question is how to root the phone or enable USB Debugging from pc in fastboot mode.
Which recovery please
so you have custom recovery or stock recovery?
i have custom rom
I have custom ROM but not able to install it....
Reason is posted above....
custom rom? -_- I asked recovery not rom
yes i have recovery
yes i have recovery...
Hello guys. I need your help. I think i somehow soft bricked my dad's s3 3gb ram version.
What i have done is flashing a TWRP img. Twrp was just fine. After that i wiped and installed a rom. I think the zip was broken or something because after the processes is done twrp said there is no OS (operation system). I clicked on reboot anyway by mistake i guess...
And at this point my phone only restarts itself. I can get in FASTBOOT mode. I have the drivers and all but i dont know what can i do with the fastboot mode.. But fastboot seems stable. The phone is not restarting when it is on fasboot mode. Yet as i say again. Is there ANYTHING i can do with fastboot commands? i tried to flash a recovery twrp img it said recovery partition doesnt support flashing..
When i try to boot in recovery the phone seems to start booting to recovery but after a while it restarts itself as it does always...
I tried SP flash tool mode too. My driver is fine, i can see preloader driver on my device manager but as always phone restarts itself to boot in normal mode... If only i can stop the phone from restarting.. I have twrp backup... Or i can flash stock rom...
Please help... Any reply will be appreciated.
I mentioned my problem on the main topic of jiayu s3 but since there is so little user attention there i wanted to open a thread here as well.. Sorry if its out of rule.
Wassup aliens!
So I got this gionee M3 and I rooted it with iRoot and tried to flash recovery in nearly every way possible....... I tried using Flashify, Rashr, TWRP manager..... Nothing worked.
1) On Flashify: I kept selecting Flash recovery but the message I get every time is "Error copying the file, please send me the log file".
2) On Rashr and TWRP Manager: They both say they flashed the file but when I boot into recovery all I see is gray screen with a gionee logo. I also lost my stock recovery this way.
3) On PC: My PC never detects my phone as an adb or VCom device........To check for VCom I tried SP Flash Tools..... didn't detects the device. For Adb I tried Adb devices in command prompt but the devices list is empty.
Some info:
I have USB debug mode enabled.
I have stock 5.0.2 android rom with no recovery just factory safe mode through which I can perform some tasks.
If you need any pics or any info just tell me in the comments.
I hope you guys help me.... Been trying for the last 6 days.
HELP ASAP SOS
Love,
Justin Biebar
Tarun0101 said:
Wassup aliens!
So I got this gionee M3 and I rooted it with iRoot and tried to flash recovery in nearly every way possible....... I tried using Flashify, Rashr, TWRP manager..... Nothing worked.
1) On Flashify: I kept selecting Flash recovery but the message I get every time is "Error copying the file, please send me the log file".
2) On Rashr and TWRP Manager: They both say they flashed the file but when I boot into recovery all I see is gray screen with a gionee logo. I also lost my stock recovery this way.
3) On PC: My PC never detects my phone as an adb or VCom device........To check for VCom I tried SP Flash Tools..... didn't detects the device. For Adb I tried Adb devices in command prompt but the devices list is empty.
Some info:
I have USB debug mode enabled.
I have stock 5.0.2 android rom with no recovery just factory safe mode through which I can perform some tasks.
If you need any pics or any info just tell me in the comments.
I hope you guys help me.... Been trying for the last 6 days.
HELP ASAP SOS
Love,
Justin Biebar
Click to expand...
Click to collapse
Hey i have the same problem. Can you suggest me something regarding this.
A very big question
Hello! I have an argentine copy of the M3, called Hyundai Ultra Energy, same processor, same storage, camera quality, all in the same place. My question is how do I install a custom rom and how do I flash the recovery at first. I use adb commands, but I know that I have to do it with spflash. How is the process? I download the rom, charge the scatter and tilt only in recovery? Would be dangerous? Is more safe to root with King Root?
Hello all, i recently picked up a ulefone armor 2s and i was attempting to root it and i have made a mistake and now i don't know what to do as the phone is in a bricked state at the moment.
I followed the guide here
https://forum.xda-developers.com/android/development/root-ulefone-armor-2-easy-rooting-t3780055
and have got nothing as TWRP did not load on to the device properly and i am stuck in a boot loop. i am thinking that somehow i made a big mistake and deleted the recovery somehow and i am unsure on how to load a recovery back on.. I have rooted phones before so i have a basic understanding of ow it works but i dont know how to fix this...
Please Help and thank you for helping
-B
Try using pc.. if its still detected by the system..
If yes check the processor of your ulephone if its mediatek or qualcomm. If its MTK use sp flash tools else use qualcomm flash tools.
Even if the bootloader is missing, its the preloader that will be there. And flash tools are the way they can make use of preloader. Make sure you have proper drivers installed in your system.
If you have a working recovery, install it via flash tools so the device can rise from the dead..
abhinavp649 said:
Try using pc.. if its still detected by the system..
If yes check the processor of your ulephone if its mediatek or qualcomm. If its MTK use sp flash tools else use qualcomm flash tools.
Even if the bootloader is missing, its the preloader that will be there. And flash tools are the way they can make use of preloader. Make sure you have proper drivers installed in your system.
If you have a working recovery, install it via flash tools so the device can rise from the dead..
Click to expand...
Click to collapse
Thank you for this, I got the device back up and running... But I'm missing a bootloader now. Any thoughts on how to flash it?