[Q] Building error aosp - Xperia Z2 Q&A, Help & Troubleshooting

guys im getting this error when building any help here cause im a complete newbie.
from this guide
http://developer.sonymobile.com/kno...ld-aosp-lollipop-for-unlocked-xperia-devices/
Code:
PRODUCT_COPY_FILES device/sony/sirius/rootdir/system/etc/libnfc-nxp.conf:system/etc/libnfc-nxp.conf ignored.
No private recovery resources for TARGET_DEVICE sirius
No recovery.fstab for TARGET_DEVICE sirius
make: *** No rule to make target `–j'. Stop.
#### make failed to build some targets (38 seconds) ####
Now when i repo sync it gives me this error:
error: hardware/libhardware/: platform/hardware/libhardware checkout 628ce4aedaa03d989ac403df533448cd78e701f7
EDIT:i searched online and somehow got past the error but now im getiing this error
Code:
In file included from external/libnfc-nci/src/hal/include/nfc_hal_api.h:27:0,
from external/libnfc-nci/src/nfc/include/nfc_api.h:32,
from external/libnfc-nci/src/nfa/include/nfa_api.h:32,
from packages/apps/Nfc/nci/jni/NativeLlcpConnectionlessSocket.cpp:26:
hardware/libhardware/include/hardware/nfc.h:56:1: error: expected unqualified-id before '<<' token
<<<<<<< HEAD
^
hardware/libhardware/include/hardware/nfc.h:94:3: error: 'nfc_nci_module_t' does not name a type
} nfc_nci_module_t;
^
make: *** [out/target/product/sirius/obj/SHARED_LIBRARIES/libnfc_nci_jni_intermediates/NativeLlcpConnectionlessSocket.o] Error 1
make: *** Waiting for unfinished jobs....
In file included from external/libnfc-nci/src/hal/include/nfc_hal_api.h:27:0,
from external/libnfc-nci/src/include/NfcAdaptation.h:24,
from packages/apps/Nfc/nci/jni/NativeLlcpServiceSocket.cpp:19:
hardware/libhardware/include/hardware/nfc.h:56:1: error: expected unqualified-id before '<<' token
<<<<<<< HEAD
^
hardware/libhardware/include/hardware/nfc.h:94:3: error: 'nfc_nci_module_t' does not name a type
} nfc_nci_module_t;
^
make: *** [out/target/product/sirius/obj/SHARED_LIBRARIES/libnfc_nci_jni_intermediates/NativeLlcpServiceSocket.o] Error 1
external/sqlite/dist/sqlite3.c: In function 'fts3SnippetFunc':
external/sqlite/dist/sqlite3.c:143651:11: warning: 'iS' may be used uninitialized in this function [-Wmaybe-uninitialized]
if( iS>iBestScore ){
^
external/sqlite/dist/sqlite3.c:143643:13: note: 'iS' was declared here
int iS;
^
#### make failed to build some targets (03:21 (mm:ss)) ####
never mind i some how got it to work and i built aosp and flashed it and it BOOTS !!.

have you concidered PMming Pabx or Krabappel2548
these two xda users may know where i do not

@Farooq95
Any news about the error?
I got the same.
Greatz WuChEn

Der-WU said:
@Farooq95
Any news about the error?
I got the same.
Greatz WuChEn
Click to expand...
Click to collapse
try in the terminal
Code:
git commit -a
if it doent work then
Code:
repo forall -vc "git reset --hard"

Doesn't work for me
Farooq95 said:
try in the terminal
Code:
git commit -a
if it doent work then
Code:
repo forall -vc "git reset --hard"
Click to expand...
Click to collapse
Hi
I am stuck at the same point. Didn't get it working even after running repo forall -vc....
Please help

Related

Please Help with building error

hi people i started building cm7 for huawei g300 but i get error:
Code:
Copy: out/target/product/u8815/system/lib/libril.so
target Executable: rild (out/target/product/u8815/obj/EXECUTABLES/rild_intermediates/LINKED/rild)
prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/../lib/gcc/arm-eabi/4.4.3/../../../../arm-eabi/bin/ld: out/target/product/u8815/obj/EXECUTABLES/rild_intermediates/rild.o: in function s_rilEnv:rild.c(.data.rel+0x4): error: undefined reference to 'RIL_onUnsolicitedResponse'
collect2: ld returned 1 exit status
make: *** [out/target/product/u8815/obj/EXECUTABLES/rild_intermediates/LINKED/rild] Error 1
make: *** Waiting for unfinished jobs....
if someone know what to do to fix this error, please tell me.
ficko_98 said:
hi people i started building cm7 for huawei g300 but i get error:
Code:
Copy: out/target/product/u8815/system/lib/libril.so
target Executable: rild (out/target/product/u8815/obj/EXECUTABLES/rild_intermediates/LINKED/rild)
prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/../lib/gcc/arm-eabi/4.4.3/../../../../arm-eabi/bin/ld: out/target/product/u8815/obj/EXECUTABLES/rild_intermediates/rild.o: in function s_rilEnv:rild.c(.data.rel+0x4): error: undefined reference to 'RIL_onUnsolicitedResponse'
collect2: ld returned 1 exit status
make: *** [out/target/product/u8815/obj/EXECUTABLES/rild_intermediates/LINKED/rild] Error 1
make: *** Waiting for unfinished jobs....
if someone know what to do to fix this error, please tell me.
Click to expand...
Click to collapse
Well......Are you using the original toolchain or is that LINARO?
because it looks like the error is being effected by the toolchain atleast thats what i see ....An error in RILD
Try a different toolchain and let me know if the error occurs again
And by different toolchain i mean the stock toolchain

Im trying to build cm 13 but i got this error pls help

build/core/product_config.mk:239: *** _nic.PRODUCTS.[[device/motorola/condor/cm.mk]]: "vendor/motorola/msm8610-common/msm8610-common-vendor.mk" does not exist. Stop.
** Don't have a product spec for: 'cm_condor'
** Do you have the right repo manifest?
try this repo https://github.com/Moto8610/proprietary_vendor_motorola
Thnx i will try it.
Do i need to remove the entire cm repo folder or i can remove the devices synced repo and sync again.
GNVM said:
Do i need to remove the entire cm repo folder or i can remove the devices synced repo and sync again.
Click to expand...
Click to collapse
Are you building from your own device tree? Or ashwin007's device tree?
From ashwins tree
That issue is solved now i get these errors
Code:
external/zip/src/zip.c:1287:9: warning: unused parameter 'unzippath' [-Wunused-parameter]
char *unzippath;
^
external/zip/src/zip.c:1434:11: warning: explicitly assigning value of variable of type 'char *' to itself [-Wself-assign]
zippath = zippath;
~~~~~~~ ^ ~~~~~~~
external/zip/src/zip.c:1799:9: warning: explicitly assigning value of variable of type 'const char *' to itself [-Wself-assign]
zfn = zfn;
~~~ ^ ~~~
external/zip/src/zip.c:1850:9: warning: unused parameter 'out_path' [-Wunused-parameter]
char *out_path;
^
external/zip/src/zip.c:698:12: warning: unused function 'help_extended' [-Wunused-function]
local void help_extended()
^
5 warnings generated.
target arm C: zip <= external/zip/src/unix/unix.c
make: *** No rule to make target `vendor/motorola/msm8610-common/proprietary/vendor/lib/libmm-hdcpmgr.so', needed by `/home/gnvm-dev/bin/cm13.0/out/target/product/condor/system/vendor/lib/libmm-hdcpmgr.so'. Stop.
make: *** Waiting for unfinished jobs....
external/zip/src/unix/unix.c:571:12: warning: unused parameter 'z_utim' [-Wunused-parameter]
iztimes *z_utim;
^
1 warning generated.
make: Leaving directory `/home/gnvm-dev/bin/cm13.0'
#### make failed to build some targets (09:21 (mm:ss)) ####
I have found the solution but i got a new error.
Code:
target SharedLib: memtrack.msm8610 (/home/gnvm-dev/bin/cm13.0/out/target/product/condor/obj/SHARED_LIBRARIES/memtrack.msm8610_intermediates/LINKED/memtrack.msm8610.so)
prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.9/arm-linux-androideabi/bin/ld: error: /home/gnvm-dev/bin/cm13.0/out/target/product/condor/obj/SHARED_LIBRARIES/memtrack.msm8610_intermediates/memtrack_msm.o: file is empty
prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.9/arm-linux-androideabi/bin/ld: error: /home/gnvm-dev/bin/cm13.0/out/target/product/condor/obj/SHARED_LIBRARIES/memtrack.msm8610_intermediates/kgsl.o: file is empty
clang: error: linker command failed with exit code 1 (use -v to see invocation)
make: *** [/home/gnvm-dev/bin/cm13.0/out/target/product/condor/obj/SHARED_LIBRARIES/memtrack.msm8610_intermediates/LINKED/memtrack.msm8610.so] Error 1
make: *** Waiting for unfinished jobs....
make: Leaving directory `/home/gnvm-dev/bin/cm13.0'
#### make failed to build some targets (01:25:33 (hh:mm:ss)) ####

Sony - Xperia - SGP611 - Custom Rom build error

Hi there all,
I have been trying for about a week to get a custom android 5 built for a client for their Xperia Z3 tablet i have followed all the instructions on the Sony website and am running Ubuntu 16, after getting the repositories and required sony Vendor files i finally get to the make -j4 command, this starts to run until it hits an error saying that there is no vendor file for scorpion_windy and then breaks the make process, my question is can i download this resource separately, and also if not how can i choose what files the make command uses can i not just skip the scorpion_windy file?
I am a complete noob and any assistance in this regard would be much appreciated!
Thanks in advance
The info on this thread is what I used http://forum.xda-developers.com/z3-...torial-stock-android-marshmallow-6-0-t3409486 It worked fine on LinuxMint KDE.
SGP611 Build errors
Hi There,
I appreciate the input, but i am attempting to compile the aosp archive, once i complete the setup and finally get to make -j4 the process runs along until it gives me an error regarding the file healthd and the specific error of battery monitor error, i have tried to do this in kit kat, jellybean and marshmallow now have all the sony device files followed the instructions here
developer.sonymobile.com/open-devices/aosp-build-instructions/how-to-build-aosp-marshmallow-for-unlocked-xperia-devices/
But no dice im pretty confused and frustrated at this point any thoughts would be very much appreciated
Can you post a copy of the error from the terminal console?
iancornelius said:
Can you post a copy of the error from the terminal console?
Click to expand...
Click to collapse
Hi There,
Thank you for your reply here is the error im getting
...
including ./vendor/sony/yukon-seagull/proprietary/Android.mk ...
including ./vendor/sony/yukon-tianchi/proprietary/Android.mk ...
No private recovery resources for TARGET_DEVICE scorpion_windy
make: *** No rule to make target 'external/openssl/flavor.mk'. Stop.
#### make failed to build some targets (01:02 (mm:ss)) ####
very frustrating when you learning
Ok so i cleaned my entire system and re synced my repos, and got much further in the process follwing the instructions exactly and now i get this error
libnativehelper/JniInvocation.cpp:165: error: unsupported reloc 43
libnativehelper/JniInvocation.cpp:165: error: unsupported reloc 43
libnativehelper/JniInvocation.cpp:165: error: unsupported reloc 43
clang: error: linker command failed with exit code 1 (use -v to see invocation)
build/core/host_shared_library_internal.mk:44: recipe for target 'out/host/linux-x86/obj32/lib/libnativehelper.so' failed
make: *** [out/host/linux-x86/obj32/lib/libnativehelper.so] Error 1
make: *** Waiting for unfinished jobs....
#### make failed to build some targets (01:50:56 (hh:mm:ss)
Any help would be much appreciated!
Monkybomb said:
Ok so i cleaned my entire system and re synced my repos, and got much further in the process follwing the instructions exactly and now i get this error
libnativehelper/JniInvocation.cpp:165: error: unsupported reloc 43
libnativehelper/JniInvocation.cpp:165: error: unsupported reloc 43
libnativehelper/JniInvocation.cpp:165: error: unsupported reloc 43
clang: error: linker command failed with exit code 1 (use -v to see invocation)
build/core/host_shared_library_internal.mk:44: recipe for target 'out/host/linux-x86/obj32/lib/libnativehelper.so' failed
make: *** [out/host/linux-x86/obj32/lib/libnativehelper.so] Error 1
make: *** Waiting for unfinished jobs....
#### make failed to build some targets (01:50:56 (hh:mm:ss)
Any help would be much appreciated!
Click to expand...
Click to collapse
I've recently built Nougat for my device and came across no errors and followed the guide to the single letter. Have you done everything it has asked to? Most importantly the first part regarding openjdk-8 and the other libraries to be installed.

Please Someone Help Finish my LineageOs Build

Can someone please help me to finish my LineageOs build, I did make my own device and vendor tree I'm using prebuilt kernel.
I dont what is this error or how to fix.
system/netd/server/SoftapController.cpp:156:17: error: unused parameter 'ifname' [-Werror,-Wunused-parameter]
const char *ifname) {
^
1 error generated.
build/core/binary.mk:986: recipe for target '/home/neverson/android/system/out/target/product/omega/obj/EXECUTABLES/netd_intermediates/SoftapController.o' failed
make: *** [/home/neverson/android/system/out/target/product/omega/obj/EXECUTABLES/netd_intermediates/SoftapController.o] Error 1
make: Leaving directory '/home/neverson/android/system'
#### make failed to build some targets (01:08:21 (hh:mm:ss)) ####
Dersaun said:
Can someone please help me to finish my LineageOs build, I did make my own device and vendor tree I'm using prebuilt kernel.
I dont what is this error or how to fix.
system/netd/server/SoftapController.cpp:156:17: error: unused parameter 'ifname' [-Werror,-Wunused-parameter]
const char *ifname) {
^
1 error generated.
build/core/binary.mk:986: recipe for target '/home/neverson/android/system/out/target/product/omega/obj/EXECUTABLES/netd_intermediates/SoftapController.o' failed
make: *** [/home/neverson/android/system/out/target/product/omega/obj/EXECUTABLES/netd_intermediates/SoftapController.o] Error 1
make: Leaving directory '/home/neverson/android/system'
#### make failed to build some targets (01:08:21 (hh:mm:ss)) ####
Click to expand...
Click to collapse
Hi,
This error is generally due to not having LIBWPA_CLIENT_EXISTS flag enabled
either you can try
$ export LIBWPA_CLIENT_EXISTS=true
if this not solves your issue then check Android.mk of the project
system/netd/server/Android.mk
Here it is showing that LIBWPA_CLIENT_EXISTS depends on WPA_SUPPLICANT_VERSION
ifdef WPA_SUPPLICANT_VERSION
LOCAL_CFLAGS += -DLIBWPA_CLIENT_EXISTS
LOCAL_SHARED_LIBRARIES += libwpa_client
LOCAL_C_INCLUDES += external/wpa_supplicant_8/src/common
endif
You can find this flag WPA_SUPPLICANT_VERSION somewhere inside vendor/chipset/proprietary/common
Hope this helps.
Thanks
Girish
dja
I have checked all these files, alright, but the problem does not resolve

CM 12.0 Build Failed with Error 127

I'm trying to build CM 12.0 for Nexus 9.
I followed instructions from here :
https://wiki.lineageos.org/devices/flounder/build#start-the-build
Only thing I changed is replacing CM-14.1 with CM-13.0 in the following command:
Code:
repo init -u https://github.com/LineageOS/android.git -b cm-14.1
I am getting Error 127. These are the details:
Code:
vendor/cm/build/core/maven_artifact.mk:42: recipe for target '/home/attila/android/cm13/out/target/common/obj/JAVA_LIBRARIES/ambientsdk_intermediates/com.cyngn.ambient.ambientsdk-1.6.0-147069776-39fe2d07.aar' failed
make: *** [/home/attila/android/cm13/out/target/common/obj/JAVA_LIBRARIES/ambientsdk_intermediates/com.cyngn.ambient.ambientsdk-1.6.0-147069776-39fe2d07.aar] Error 127
make: *** Waiting for unfinished jobs....
Notice file: packages/providers/DataUsageProvider/NOTICE -- /home/attila/android/cm13/out/target/product/flounder/obj/NOTICE_FILES/src//system/priv-app/DataUsageProvider/DataUsageProvider.apk.txt
make: Leaving directory '/home/attila/android/cm13'
#### make failed to build some targets (20:33 (mm:ss)) ####
Not sure What I'm doing wrong. Any help will be greatly appreciated.
pikudroid said:
I'm trying to build CM 12.0 for Nexus 9.
I followed instructions from here :
https://wiki.lineageos.org/devices/flounder/build#start-the-build
Only thing I changed is replacing CM-14.1 with CM-13.0 in the following command:
Code:
repo init -u https://github.com/LineageOS/android.git -b cm-14.1
I am getting Error 127. These are the details:
Code:
vendor/cm/build/core/maven_artifact.mk:42: recipe for target '/home/attila/android/cm13/out/target/common/obj/JAVA_LIBRARIES/ambientsdk_intermediates/com.cyngn.ambient.ambientsdk-1.6.0-147069776-39fe2d07.aar' failed
make: *** [/home/attila/android/cm13/out/target/common/obj/JAVA_LIBRARIES/ambientsdk_intermediates/com.cyngn.ambient.ambientsdk-1.6.0-147069776-39fe2d07.aar] Error 127
make: *** Waiting for unfinished jobs....
Notice file: packages/providers/DataUsageProvider/NOTICE -- /home/attila/android/cm13/out/target/product/flounder/obj/NOTICE_FILES/src//system/priv-app/DataUsageProvider/DataUsageProvider.apk.txt
make: Leaving directory '/home/attila/android/cm13'
#### make failed to build some targets (20:33 (mm:ss)) ####
Not sure What I'm doing wrong. Any help will be greatly appreciated.
Click to expand...
Click to collapse
In case someone faces the same problem in future, the error was there because I was missing maven.
Just do
Code:
sudo apt-get install maven

Categories

Resources