Hi All,
After around with my phone for many hours attempting to flash the latest android I have managed to break my WiFi, as I can no longer turn it on. I believe this is due to flashing an incorrect firmware file but I am not sure.
Currently I am running Android Revolution HD 30.1 but I also had the same problems with 4.X roms as well. My recovery image is: openrecovery-twrp-2.8.4.0. I was previously on 4.4.3 stock image which was rooted.
Fastboot vars:
Code:
C:\Android\com>htc_fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.22.21331147A1.29G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.28.401.9
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: ************
(bootloader) imei: **************
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: df77f8b7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
Execution time is 13(ms)
The last firmware file I flashed was: /db_mirror/Firmware/HTC/HTC_One_M8/401/3.28.401.9.zip (xda7.androidrevolution.org)
Any help with either what firmware to flash or another way to fix the WiFi will be most appreciated.
Just realised I have posted this in the wrong section, my phone isnt A&T I am UK based and I bought the phone SIM free. Unfortunately I cant seem the delete the thread...
I read in multiple places that you need firmware 4.16.401.9 for htc sense lollipop. For now try to use CM12 and see if your wifi works that way. If so then it is just a matter waiting for a signed firmware to get it to work with sense lollipop.
Related
Hello everyone! I recently bought a black 32GB HTC One through AT&T. I immediately set to unlocking/rooting/installing a custom recovery. I even used Rumrunner to gain S-OFF. Everything is running fine on my Google Play Edition 4.4.2 ROM. However, my problem is that flashing a CM11-based ROM yields a nonworking camera. It simply reads 'Cannot connect to the camera.' I've tried this on three different ROMs on both the latest TWRP and CWM. I even updated my firmware to the latest Kitkat-based version. Could anyone tell me what I should try now?
I take it that my situation must be rather unique.
Did you flash a 4.4 gapps as well?
cschmitt said:
Did you flash a 4.4 gapps as well?
Click to expand...
Click to collapse
Yes, I did with each ROM I tested.
If it helps in any way possible, this is what I get with "Fastboot getvar all"
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4T.21.3218.21
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.1700.1
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: HT3AKW904878
(bootloader) imei: 354439058587389
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4148mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e82187e
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.090s
*Sorry for bad English*
So i have my htc one (m7), and i was trying to get it back to stock htc sense, because is was on cyanogenmod and i didn't really like it. i have used the tutorial from htc-one.wonderhowto .com ... I followed all the steps (relocked bootloader and downloaded HTC program), but the RUU wasn't compatible, i didn't know that at the time. So I was searching for another RUU, but I coudn't find a one to fit my device.
This is what *fastboot getvar all* gives me:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.55.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.62.401.1
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: SH35WW909931
(bootloader) imei: XXXXXXXXXXXXXXX
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__E11
(bootloader) battery-status: good
(bootloader) battery-voltage: 4315mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bb768ae1
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
As you can see, i currently have s-on, and i can't find a proper RUU. So i tryed if there was a way to set my s-on to s-off. but i can't do that with rumrunner, since i am not able to uncheck *fastboot* in android settings, because i can't boot. Note: i have Clockworkmod Recovery installed. I live in the Netherlands.
Can anyone help me with this? i'm new to all this info so i dont know if there is an other way to simply install the stock htc rom.
i just got the att m8 , it has hboot 3.16. i was able to unlock with htc dev, s-off was easy on firewater, but i have not been ablle to successfully flash other roms. the phone will finish successfully but upon rebooting into the new rom, the phone will get to the screen when u chose language then reboot itself every min or so from booting up. i havent tryied to flash any aosp roms yet, i have a feeling that aosp roms would work fine, but i dont want an aosp rom yet. i feel like its a sense thing. i have tryed to change my phone to a developer edition, changed cid to supercid, flash developer nandroid, same problem, i sim unlocked and using tmobile sim card no issues there, but the stock rom my phone came with is the only one that works.
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.16.0.0000
(bootloader) version-baseband: 1.16.21331931.
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: c3d94491
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
I would like to know if someone could help me out i am trying to install ViperOneM8 but on there website it says that i need to update my firmware to 5.0.x Lollipop and i seem to not be doing something right or getting the right files cause everything i have tried fails to update these are the threads i have looked at so far if i have missed something please let me know.
http://forum.xda-developers.com/htc-one-m8/development/progress-fuu-m8-t2813792
http://forum.xda-developers.com/att-htc-one-m8/general/att-4-4-4-firmware-signed-encrypted-t3031703
http://forum.xda-developers.com/htc-one-m8/help/ota-lollipop-update-fails-red-triangle-t3015597
Getvar All
Code:
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.16.21331931.LA11G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 7f8e91a3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Software Information for my phone
Please edit and remove your serial and imei. Below is a zip to flash the firmware without boot or recovery.
http://forum.xda-developers.com/att-htc-one-m8/general/lollipop-ota-twrp-backup-firmware-t3075835
Thanks
Thank you very much for replying to my post and thanks for telling me about the serial and IMEI. I have already done the firmware update thanks to the support guys over at venom.com
I have a bone stock M8 on Marshmallow. It suddenly started having com.htc.contacts errors and the phone becomes unavailable. I've done multiple recoveries, resets and cache clearing. Sometimes it comes back for awhile but soon eras out. I chatted with HTC support and they suggested reloading the rom so I downloaded the AT&T version and did all the steps per the instructions and started the update. It gets stuck on the "sending" stage and never completes. Reading the forum I saw Sync Manager can be a blocker so I didn't do it through that but no go. Am I missing something? Thanks I searched but didn't find this.
I assume you actually have the AT&T version M8?
If so, RUU stuck "sending" is common. You may need to find a Win7 PC with USB 2.0, which has the best chance of compatibility.
Back to Stock
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: [email protected]
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 6.20.502.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: HT45SWM06618
(bootloader) imei: XXXXXXXXXXXXXXX ( Deleted)
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul_ca
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B12000
(bootloader) cidnum: CWS__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 205bdca3
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.125s
Bootloader - Unlocked
Recovery - TWRP
Rooted - Yes
Custom ROM - Resurrection Remis 5.8.5 Final
if want to go back to stock what is procedure
i have below RUU
RUU_M8_UL_M60_SENSE70_ATT_MR_Cingular_US_6.20.502. 5_combined.exe
can i run this exe after relock the bootloader?