Stock ROM for D620 based on D62010j_00
Link removed for some error
What do you mean by "Stock ROM"?
Sent from my D620r [Stock 4.4.2]
Good question. And since he's Italian, why does he share a update.zip with a Russian folder and an executable file in it? I am suspicious.
Downloaded that file, and it contains illegal Windows keys.
Benji96 said:
Good question. And since he's Italian, why does he share a update.zip with a Russian folder and an executable file in it? I am suspicious.
Downloaded that file, and it contains illegal Windows keys.
Click to expand...
Click to collapse
Yeah, sorry, my fail... i update it later
And how exactly did you "accidentaly" upload an "update" with only 2 files (and the system.img is 2.4 GB size) and illegal keys? [emoji79]
Vagelis1608 said:
What do you mean by "Stock ROM"?
Sent from my D620r [Stock 4.4.2]
Click to expand...
Click to collapse
Flashable zip from D62010j_00.kdz
Benji96 said:
And how exactly did you "accidentaly" upload an "update" with only 2 files (and the system.img is 2.4 GB size) and illegal keys? [emoji79]
Click to expand...
Click to collapse
well, about the keys i'm not sure
and for update i used lgfirmware extract tool to extract kdz, dz and merge system-bin after this i renamed the boot.bin->boot.img and copied system.img, cust.bin, boot.img to desktop (previously downloaded template and finally moved it to zip archive with 7zip
-----------
yeah, my english is terrible, sorry
Closing this up while you figure out what you want to upload. Once you're ready, please report this thread and a moderator can open it for you.
Also, please make sure whatever you upload contains nothing illegal etc.
Thanks.
Related
Hi,
i modded the flasher it should work now for Minis too.
so please somebody upload the 3!!!! Files from Seus DB Folder of the 2.1 Nordic Rom for X10 Mini and X10 Mini Pro.
If you do so i can decrypt them an upload it together with a flashtool for you.
Best Regards
Bin4ry
With the new SEUS update , those 3 files are impossible to take ( correct me if im wrong )... can you tell which files exactly ? I'll upload..
Thanks a lot
Just let us know where exactly are files located or names of files...
The files should be in "C:\Program Files\Sony Ericsson\Update Service\db"
You can directly decrypt with this tool too!
After that take the new 2.1 Flasher from X10 Forums and put Mini loader.sin and firmware sin files in "firmware" Folder!
Regards
Bin4ry
cocker80 said:
The files should be in "C:\Program Files\Sony Ericsson\Update Service\db"
Click to expand...
Click to collapse
There is lot of files, around 122MB of space..I will zip it and upload somewhere...
stillka said:
There is lot of files, around 122MB of space..I will zip it and upload somewhere...
Click to expand...
Click to collapse
Within the the "blob_fs" folder there should be three files starting with "FILE_*" think thats all we need. FileJumbo http: // filejumbo .com (take the spaces out) is a good free upload place.
cocker80 said:
Within the the "blob_fs" folder there should be three files starting with "FILE_*" think thats all we need. FileJumbo http: // filejumbo .com (take the spaces out) is a good free upload place.
Click to expand...
Click to collapse
Hello,
whole DB directory is here: http://leteckaposta.cz/113967258
Hi
I need some help please, i downloaded all the files but were do they go .. to decrypt and flash and so?
Can someone give us a newbi proof howto pls pls?
kimbo
Thanks will upload soon!
Regards
Bin4ry
Bin4ry said:
Thanks will upload soon!
Regards
Bin4ry
Click to expand...
Click to collapse
Can we roll back to 1.6 using your flasher?
Here you go:
http://forum.xda-developers.com/showthread.php?t=825664
Theoretically you can rollback! Someone must decrypt the rom than you can rollback, minis has the same layout of partitions since the first day they came out!
Regards
Bin4ry
Can somebody upload decrypted 1.6 mini pro so we can use it to rollback to original region when update to 2.1 comes out
yeah. someone need to upload 1.6 rom for backup and rollback purpose.
What abt mini pro?
Sent from my U20i using XDA App
Here is the downgrade to 1.6 for mini pro!
http://forum.xda-developers.com/showthread.php?t=827273
I don't know whether you want it, but here are the 2.1 files for the Mini Pro, Singapore Generic. These may remove any potential keyboard conflicts.
Bin4ry said:
Thanks will upload soon!
Regards
Bin4ry
Click to expand...
Click to collapse
Thaks Bin4ry for your support.
I have a question.
After decrypted my firmware, i got 3 tgz files. Extracted them i got 12 files, 9 *.sin.
Where's the loader.sin the complete my firmware?
Thank you.
I tried to decrypt, but each time the tgz I got are corrupted.
changing com.sonyericsson.cs.generic_2.10.9.13.jar and com.sonyericsson.cs_ma3_common_2.10.9.13.jar by new version found in seus folder (2.10.11.10) don't change anything.
solved : I have to rename tgz into tar then I extract it
and the obtained file have to be renaimed into tgz, then winrar can extract it.
kimb0 said:
Hi
I need some help please, i downloaded all the files but were do they go .. to decrypt and flash and so?
Can someone give us a newbi proof howto pls pls?
kimbo
Click to expand...
Click to collapse
Bin4ary... any tutorial plz, i want to make a backup of my Original Firmware!!!!
Hey guys im proud to present you this tutorial that will be updated with more link and screenies.
STEP 0 :Download 7Zip,Ext2Read,FlashTool from their sites(just google)
STEP 1 :Install these program correctly on C: (ext2read must be extracted on C:,isnt installable)
STEP 2 :Now pick a whatever ftf(you can found it in this section) and put on C:
STEP 3 :Now right click on the ftf file,select 7zip,select Open.
STEP 4 :Now extract system.sin on C:
STEP 5 :Now open Flashtool,click tools,click sin editor,select your system.sin,click dump data
STEP 6 :After flashtool finish click close and exit from it
STEP 7 :Now on C: you will have system.ext4 and a random system? File.
STEP 8 :Now open ext2read and click folder icon,select system.ext4 file,select open and select the folder like (C:/) in the 1st whhite window and click floppy icon,now ext2read will save the system folder on C: .
Finish!!! Please hit thanks if i helped
Reserved more
Motivami a continuare il develop cliccando Thanks/
Keep up my develop hitting Thanks!!!
_
Thank YOU. HELPED CLICKED
Thanks buddy.......... It helped.............
You can tell How to pck the edited files into system.sin again and then to ftf again??
jatinrungta said:
You can tell How to pck the edited files into system.sin again and then to ftf again??
Click to expand...
Click to collapse
No way to do this
Sent from my Xperia U using xda app-developers app
jatinrungta said:
You can tell How to pck the edited files into system.sin again and then to ftf again??
Click to expand...
Click to collapse
bro you will have to create a new .zip file out of the edited system files.......... and also with META-INF so that it can be flashed via CWM......... There is no way to create an ftf file from this again...............
Better move this general section since it's common to all 2012Xperia devices...
Sent from my ST25i using xda premium
Cant we the repack modded system.sin to ftf?
Sent from my ST25i using xda app-developers app
PrakashGD said:
Cant we the repack modded system.sin to ftf?
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
No
GEKTHEBOSS said:
No
Click to expand...
Click to collapse
So we cant change apps in stock firmware right?
Sent from my ST25i using xda app-developers app
R: [TUTORIAL] Extract system folder from ftf [WINDOWS][By GEKTHEBOSS]
PrakashGD said:
So we cant change apps in stock firmware right?
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
Yes ! Very sad!
Upp
If I extract system.sin only can see the app folder, the others folders are empty, why? How can I get the others folders?
Im missing the files
CERT.RSA
CERT
and the folder COM
in the META-INF FOLDER.
Is this a problem when you flash the rom in to your phone ?
xperia_bird said:
Im missing the files
CERT.RSA
CERT
and the folder COM
in the META-INF FOLDER.
Is this a problem when you flash the rom in to your phone ?
Click to expand...
Click to collapse
CERT.RSA & CERT aren't important
but you need the /com folder because it contains the updater-script, which tells the ROM how and where to be flashed
so you can't flash a zip unless you have the com folder, you need to download one (it is kinda standard)
omarainea said:
CERT.RSA & CERT aren't important
but you need the /com folder because it contains the updater-script, which tells the ROM how and where to be flashed
so you can't flash a zip unless you have the com folder, you need to download one (it is kinda standard)
Click to expand...
Click to collapse
So I can just copy it from a custom rom thats is made for my device ?
xperia_bird said:
So I can just copy it from a custom rom thats is made for my device ?
Click to expand...
Click to collapse
Well yes but it would be much recommended if you copy it from a stock flashable Sony firmware ROM (not AOSP based ROM like CM or PAC)
omarainea said:
Well yes but it would be much recommended if you copy it from a stock flashable Sony firmware ROM (not AOSP based ROM like CM or PAC)
Click to expand...
Click to collapse
ı see, but the problem is that I am searching for a stock zip flashable firmware. there is none :crying:
thats why I extract the FTF file than extract the system.sin.
I got my Meta-inf folder with only one file inside, got the system folder
but also no boot image? what can I do about that ?
There's no "meta-inf" folder in .sin or .img ROMs as it's a hack used to support permissions (as .zip files don't allow for them) and allow incremental updates where the .zip doesn't contain the whole /system partition
hello. I did not get a backup of the original application for systemUI lost xperia u .100. : (Is there someone who can help me with this? English is a little bad, so I'm sorry ... I hope what I'm saying. :/
bcik said:
hello. I did not get a backup of the original application for systemUI lost xperia u .100. : (Is there someone who can help me with this? English is a little bad, so I'm sorry ... I hope what I'm saying. :/
Click to expand...
Click to collapse
Re-flash ROM is the best idea.
this is the right call. however, time-consuming and troublesome to deal with. so I wanted to systemUI original. I'd appreciate your help in this regard, and much mercy.
bcik said:
this is the right call. however, time-consuming and troublesome to deal with. so I wanted to systemUI original. I'd appreciate your help in this regard, and much mercy.
Click to expand...
Click to collapse
If you have the FW FTF you can extract the sistem.sin from it (with 7-Zip or other software)
Then you extract it's content with flashtool -> Tools -> Sin Editor..
Then you need to get ext4_unpacker and you can extract anything you want from it.
I'd gladly U/L it but I have Xperia P not U.
ChikeD said:
If you have the FW FTF you can extract the sistem.sin from it (with 7-Zip or other software)
Then you extract it's content with flashtool -> Tools -> Sin Editor..
Then you need to get ext4_unpacker and you can extract anything you want from it.
I'd gladly U/L it but I have Xperia P not U.
Click to expand...
Click to collapse
information that was very useful for me ... Thank you for your interest ..
ChikeD said:
If you have the FW FTF you can extract the sistem.sin from it (with 7-Zip or other software)
Then you extract it's content with flashtool -> Tools -> Sin Editor..
Then you need to get ext4_unpacker and you can extract anything you want from it.
I'd gladly U/L it but I have Xperia P not U.
Click to expand...
Click to collapse
Where did you say, but I can not find the extracted file :/
bcik said:
Where did you say, but I can not find the extracted file :/
Click to expand...
Click to collapse
In whqat stage?
ChikeD said:
In whqat stage?
Click to expand...
Click to collapse
flashtool / tools / sin editor has taken the step where I did, but I could not find the file. I guess I do not fault the place ... :/
bcik said:
flashtool / tools / sin editor has taken the step where I did, but I could not find the file. I guess I do not fault the place ... :/
Click to expand...
Click to collapse
Where did you put the system.sin file?
ChikeD said:
Where did you put the system.sin file?
Click to expand...
Click to collapse
I put the section file to sin? my english is not good at doing what you say about the error. I'm back again, but did not.
bcik said:
I put the section file to sin? my english is not good at doing what you say about the error. I'm back again, but did not.
Click to expand...
Click to collapse
FTF file is just a zip file, inside it there is a file system.sin you should extract from it.
Any archiving software should be able to do it.
After extracting system.sin, open flashtool go to tools -> sin editor.
Click the 3 dots and select system.sin, click extract data.
When finished there will be 2 more files in the same directory of system.sin, system.partinfo and system.ext4.
system/ext4 is the file you need.
Get ext4_unpacker http://forum.xda-developers.com/showthread.php?t=1921399
With it you can extract any file you want from system.ext4
ChikeD said:
FTF file is just a zip file, inside it there is a file system.sin you should extract from it.
Any archiving software should be able to do it.
After extracting system.sin, open flashtool go to tools -> sin editor.
Click the 3 dots and select system.sin, click extract data.
When finished there will be 2 more files in the same directory of system.sin, system.partinfo and system.ext4.
system/ext4 is the file you need.
Get ext4_unpacker http://forum.xda-developers.com/showthread.php?t=1921399
With it you can extract any file you want from system.ext4
Click to expand...
Click to collapse
that's great ... I had the problem took care of him now. You saved me out of trouble, and you gave it to me thank you very much ...
Here, I uploaded the original SystemUI.apk for you from B.1.100
Mayank7795 said:
Here, I uploaded the original SystemUI.apk for you from B.1.100
Click to expand...
Click to collapse
thank you very much ...
bcik said:
thank you very much ...
Click to expand...
Click to collapse
XDA Rules: If you need to thank a person, press thanx button instead of posting it.
Sent from my Xperia U using xda app-developers app
Mayank7795 said:
XDA Rules: If you need to thank a person, press thanx button instead of posting it.
Sent from my Xperia U using xda app-developers app
Click to expand...
Click to collapse
I'm sorry, but now the rule rather than think of it when you bring the new site
I know you can create flashable out of FTF, but how to do it the other way. From flashable zip to .ftf file?
Is it possible?
RAM GUY23 said:
I know you can create flashable out of FTF, but how to do it the other way. From flashable zip to .ftf file?
Is it possible?
Click to expand...
Click to collapse
Can't you just download the ftf from Xperifirm ?
MJ999 said:
Can't you just download the ftf from Xperifirm ?
Click to expand...
Click to collapse
Yes I can, but i thought about if it is possible to do what i am asking for too?
RAM GUY23 said:
I know you can create flashable out of FTF, but how to do it the other way. From flashable zip to .ftf file?
Is it possible?
Click to expand...
Click to collapse
AFAIK it's not possible because of digital signatures, this link was taken from zxz0O0 signature and explains it technically:
Reason why we can not create custom firmware (ftf) files for Xperia
https://gist.github.com/dosomder/8ed79b26a5e063efa5ef
"// And that is the reason why we can not create custom firmwares for Xperia. If you still don't understand, RSA is an asymmetric function.
// This means it's using a private key to create the signature and a public key to read it. So even if we find the public key
// (which is somewhere on the device), we can never find or guess the private key. Therefore we can not create a valid signature."
I extract system from spflash (to make .Img into a folder), and try to add to my meta-inf and boot.img and it doesn't boot... the script is correct, I'm sure of it, it just formats system, and drops the system folder to /system, but it still doesn't boot.. what am I doing wrong? I've made stock based rooms for other devices but the stock rom was already in system folder type(I didn't have to extract system.img) and I guess it's something to do to the way I extract system.img.. how can I fix it?
Hi.
Did you convert the sparse image? If you extract the img without converting it, then it will not boot. Use simg2img to convert system.img.
Greetings
vsrookie
Ps. Please attach script.
Sent from my P9000 using XDA-Developers Legacy app
vsrookie said:
Hi.
Did you convert the sparse image? If you extract the img without converting it, then it will not boot. Use simg2img to convert system.img.
Greetings
vsrookie
Ps. Please attach script.
Click to expand...
Click to collapse
i havent converted it, i just extracted it using a winrar, ill leave the script and try to convert but im 100% the script is correct, and for some reason i cant send the script so ill leave a link to it:
https://pastebin.com/4aLmga5X
Ruben Craveiro said:
i havent converted it, i just extracted it using a winrar, ill leave the script and try to convert but im 100% the script is correct, and for some reason i cant send the script so ill leave a link to it:
https://pastebin.com/4aLmga5X
Click to expand...
Click to collapse
Hi.
That's the fault. You have to convert it. Pls check other threads on xda.
greetings
vsrookie
Sent from my P9000 using XDA-Developers Legacy app
vsrookie said:
Hi.
That's the fault. You have to convert it. Pls check other threads on xda.
greetings
vsrookie
Click to expand...
Click to collapse
I converted it to ext4 and now I'm using ext2explore to extract, will that work?
vsrookie said:
Hi.
That's the fault. You have to convert it. Pls check other threads on xda.
greetings
vsrookie
Click to expand...
Click to collapse
I converted to ext4, then from ext4 to a folder.. Packed everything and flashed, still didn't boot (I used the unedited system.img), do I have to change the boot.img to make unsecured or it doesn't matter?
vsrookie said:
Hi.
That's the fault. You have to convert it. Pls check other threads on xda.
greetings
vsrookie
Click to expand...
Click to collapse
Got it to work, thanks! I forgot to make boot.img unsecure