Related
Anyone have any leads on sources of cases to fit the Wizard? The one that comes with the K-Jam look decent of first view, but since I'll probably want something nicer I figured I would get this thread started.
Robert Harrold
Houston, TX (Ordered my K-Jam through MMB... hope to have it next Friday!)
Well, an update on this, I picked up a Targus Small Camera case Model DCCS00 and while it is a bit loose front to back it fits nicely side to side. A bit bulky but functional and It is easy to insert/remove the device. Also it securely attaches to my belt so I don't have to worry about scraping it off on my office chair. It'll do until someone releases a 'made for' case.
Robert Harrold
Houston, TX
any news with more cases to buy for the k-jam??
anyone?
I ordered and got this case for my wizard after it was recommended on another board. The guy said he found it at a mall in NY at a mobile phone accessory cart. I like it a lot. Fits perfect. The belt clip (although it isnt visible) has a built in swivel so you can wear it vertical / horizontal / or on an angle. I wear it at an angle and its so easy to place in pouch and pull out. I can also charge with the wizard in the case becuase it has a small opening in the bottom.
http://www.shopcell.com/cell-phones/cellular-accessories/HANDSPRING%20PALMONE/Treo$650/Leather-Case-Treo-650-600-Vertical-Pouch-Black-Leather/TREO650LP.html
I just ordered an OEM blackberry 71xx slip case belt clip and Tre 6xx slip case from ebay.
http://www.shopblackberry.com/_blac...gory=BlackBerry+7100t&pid=F2222WBW5TARNDHUC9F
I like to concept of slip case rather than attaching something on my belt.
I'll keep everyone posted here...
Review: PDair booktype leather case
I did a review of the PDair booktype leather case here:
http://www.onppc.com/forum/article_read.asp?id=12
Cheers, Sabesh.
I wonder if the flip type PDAir case uses the same technique to keep the k-jam in place.
I prefer the not so bulky cases. using the case that came with Treo 600 atm and it fits perfectly. slightly tight but it fits in my jacket pocket a lot better than any other cases that I've tried.
I have decided to give BB 71xx pouch a try. I had to stretch it a bit in order to get my qtek a nice fitting.
http://natt108.net/qtek/
I am also in a process of streching my treo 600 slip case with a pair of socks and will post some pictures tonight when I get home.
Does anyone have an IPOd 2/3rd Gen slip case? Can you please try and see if it'll fits nicely with your Wizard?
Blackberry 71xx case
Just taken delivery of this case:
http://www.yourwirelesssource.com/shop/5/model/235388/accessory/245843/cat/31
(though from a uk supplier)
Fits nice and snug, and the slightly extra height of the case (about 5mm) can allow you to attach the handsfree kit to the bottom of the phone, son can be used without removing from the case (the voice dial button is also accessible, as is the power button).
A slight negative is that the sides/top corner still have the potential to be damaged on dropping, but I guess most type of slip cases leave some parts exposed.
Blackberry 71xx case
Just taken delivery of this case:
http://www.yourwirelesssource.com/shop/5/model/235388/accessory/245843/cat/31
(though from a uk supplier)
Fits nice and snug, and the slightly extra height of the case (about 5mm) can allow you to attach the handsfree kit to the bottom of the phone, son can be used without removing from the case (the voice dial button is also accessible, as is the power button).
A slight negative is that the sides/top corner still have the potential to be damaged on dropping, but I guess most type of slip cases leave some parts exposed.
For those using the WIZA100 variant of the Wizard...
--
Got this case this AM. It is for the dopod 838 or VPA Compact II. So far so good my only gripe is that the case doesn't allow access to the messaging and ie buttons [when closed] and it is kinda slippery [maybe use it in tandem with a neck strap or handstrap]
--
They have one for the WIZA200 models as well
http://www.pdair.com/scripts/main/viewpda.php?pdaid=194&catid=9
Hi guys
Just received my ali PDair case - ordered Thurs night arrived this morning, outstanding service!! A great case too!!
Simon
I heard something about Aluminium cases and low gsm signal..
Are you having that kind of experience on your ppc ;
I currently have the Htc Wizard/ qtek 9100 and i am looking for a case.
Probably i'll go for the leather one.
no signal problems for me so far been using it for almost a week now... of course signal strength is also determined by your network coverage as well not only your device
Hi
Just checked on the signal stregth, one room in my house has a very weak GSM signal for Vodaphone and when using the PDair case it drops by 1 bar.
Must be shielding
Simon
Plastic screen cover
Does the aluminum case by PDair have a plastic screen cover to protect the screen like the Armor Case by Boxwave (www.boxwave.com)?
yep they have hard plastic screen
PDAir Case
Sabesh mentioned velcro in his review of the PDAir case. Does that mean there is some 'sticky pad attachment' to be done. The case says it closes with magnets, so I can't figure out where the velcro comes in unless it's to secure the handset. if that means sticking something on to the handset then I'm not so keen. i need to be able to get the handset out easily to fit in my car kit.
TIA, Davebo.
Did anybody here buy the holster from the tmobile store that they have that the g1 supposedbly fits in?
its around 24$ i think.
It was closed by sort of 2 clip things.
i'm primarily looking for a horizntal belt holster...
any ideas?
i have the body glove, it is in that price range. love it if thats what your asking
Theres a magnetic one, that fits a sidekick, it's what i use.
Body Glove
I have the Body Glove also and it's great. Perfect for the person (like me) who is rough on phones. And it looks good too.
I purchased the crystal gel case from boxwave It covers the G1 completely and offers excellent protection for when you drop the phone. I also bought the niteize side belt case. It clips on your belt and the elastic allows it to expand enough for the phone with the gel case on it to fit.This case closes with velcro so there are no magnets to create problems.
I got the one from the T-Mobile store last week but it's not the up and down one. But I have to admit was worth the money (even though I didn't end up paying for it love the gf) The one I got sits sideways but very nice and fits the phone well. Was a little snug at first but about 2 days later the phone just slides in to the case very nice.
Chedderknight said:
Theres a magnetic one, that fits a sidekick, it's what i use.
Click to expand...
Click to collapse
I talked to a TMO rep at the store and said no accessories for G1 should have any magnets due to the compass feature. He advised that if you are going to use an aftermarket case, to make sure it doesn't have any magnets. The case TMO sells are magnet free for the G1.
As for the holster, I have it and though it fits the phone snug, be careful as the screen is facing out so make sure you have a screen protector.
I just bought my G1 last 2 weekends ago with a tmobile store belt clip, fits perfectly, sturdy rotating clip for horizontal or vertical placement, gets annoying having to take it out to text or open keyboard but otherwise perfect...24$
the pleather tmo horizontal case with attached clip. it's soft but not screen friendly soft on the inside so the screen protector is a must. great product though.
One warning. If you have a tendency to forget to snap the buttons, make sure you're using a hard or jelly shell to make the phone fit snugly. the basic stretchy straps on the sides are just barely too long to make the phone 100% secure IMHO without it.
i personally like this one.
http://www.fommy.com/view-full-page.asp?divid=T-Mobile&model=T-Mobile+G1&cat=Cases&skuno=82922
you can use it with the screen either facing out for in for screen protection.
I bought this one by Seidio. I had one just like it for my Blackberry 8820 and loved it. I love this one too.
http://www.g1depot.com/seidio-spring-holster/4A24A4902.htm
Buy a bodyglove that has a belt clip for your g1 phone. You won't need to buy a suction cup or dash holder for your g1.
I clip it to my rear view mirror after pushing back the rear view mirror tab. Then I close the tab. Stays in place and very sturdy. It's even easier to see since it is under the rear view mirror and safer too!
I also can use the belt clip to hang the phone off my laptop. I don't clip it, just use the space between the glove and clip to hang it.
Also, the rubbery glove protects your phone if you drop it.
Can anyone recommend any good cases for the compact V.
I ordered a noreve case for the diamond 2. Bit disappointed with the quality of noreve given their price. Also didn't fit properly so i had to bend off the bottom metal clasps.
Anyone know any leather flip cases specially made for the Compact V, or recommend any upmarket pouches ?
thanks
I did a bit of looking around for cases that fit the TD2 (assume the compact v is the same shape), ended up getting a Proporta Aluminium Lined Leather Case from amazon, costing £23.43. This case offers a resonable amount of protection, without adding hudge amounts of bulk.
http://www.amazon.co.uk/Proporta-Al...1?ie=UTF8&s=electronics&qid=1250683306&sr=8-1
I also picked up a cheap halfords car vent mount and a usb - charger lead to use while mobile, I find the speaker is loud enough for my car without needing an amplified mount. In order to fix the phone in the case securely when its in the vent mount (phone is only gripped from the sides), Ive run some thin fishing line through the battery cover and around the arms on the case, this locks it all togethr nicely, so phone can stay in its case while chargining in the vent mount.
fibb said:
I did a bit of looking around for cases that fit the TD2 (assume the compact v is the same shape), ended up getting a Proporta Aluminium Lined Leather Case from amazon, costing £23.43. This case offers a resonable amount of protection, without adding hudge amounts of bulk.
http://www.amazon.co.uk/Proporta-Al...1?ie=UTF8&s=electronics&qid=1250683306&sr=8-1
I also picked up a cheap halfords car vent mount and a usb - charger lead to use while mobile, I find the speaker is loud enough for my car without needing an amplified mount. In order to fix the phone in the case securely when its in the vent mount (phone is only gripped from the sides), Ive run some thin fishing line through the battery cover and around the arms on the case, this locks it all togethr nicely, so phone can stay in its case while chargining in the vent mount.
Click to expand...
Click to collapse
I doubt very much that Aluminium lined case will fit the Compact V as it does have a slightly different shape to the TD2
I currently have the Telus leather holster for my Touch Pro 2, however, I must say that this thing is a piece of crap.
I'm on my second one in ~3 months. The part that holds the clip to the holster just pulls off...
I wear the phone / holster constantly, so I need something that's going to hold up to wear-and-tear. It needs to be leather, it needs side in-and-out vertically (I've seen iPhone holsters where the iPhone slides in-and-out horizontally...which is terrible imo), and it needs to have a magnetically-attaching strap to hold the phone in place (the way I wear it, it's sometimes point down...don't want the phone just sliding out...).
To be totally honest, I LOVE the Blackberry holsters...the only thing I like about BBs, actually...
So if someone could suggest and preferably link to some high-quality TP2 holsters, that'd be great!
Thanks
It may sound silly but I have gotten my last two holsters (one for my tilt and one for my tilt2) at our local flea market. $5 for a leather holster with magnetic clasp with both a metal spring clip on the back and 2 belt loops. The nice thing about doing the flea market thing you can get a better fit in most cases.
You might check out Sena Cases or Krusell. They both make nice leather cases.
Any other suggestions?
>_>
The large pda Krussel case is the way to go. It also has a belt loop.
No sense loosing your device to a belt clip.
Only problem with it is you can't use the usb dongle.
What car phone holders do people use, I am looking for a vent one as I dont want one on the windscreen.
Any decent ones out there that does not look too tacky!
I am using Baseus Osculum. It's quite cheap but it is doing well as I use it for a couple of days.
I have one of these. It's tacky litterally but my ride is full of dirt, dust and dog hair so who cares?
https://www.amazon.com/gp/aw/d/B00MXWFUQC?psc=1&ref=yo_pop_mb_pd_title